D2VW-01L3-3 [OMRON]
Snap Acting/Limit Switch;型号: | D2VW-01L3-3 |
厂家: | OMRON ELECTRONICS LLC |
描述: | Snap Acting/Limit Switch |
文件: | 总8页 (文件大小:1163K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
D2VW
Sealed Miniature Basic Switch
Sealed Miniature Basic
Switch Conforms to IP67
(Excluding the terminals on
terminal models)
● Use of epoxy resin assures stable sealing, making
this switch ideal for places subject to water spray
or excessive dust.
D
2
V
W
● V-series internal mechanism assures high
precision and durability. The mounting is the
same as of the V models.
● Ideal for automobiles, agricultural machines,
large-scale home appliances, and industrial
equipment, which require high environmental
resistance.
RoHS Compliant
Model Number Legend
1
2
3
4
5
D2VW-
@ @ @ @ @
1. Ratings
5 : 250 VAC 5 A
4. Terminals
None, HS : Solder terminals
M, MS : Molded lead wires
01: 30 VDC 0.1 A
Note: UL/CSA approved versions are available.
In this case, HS, MS will be added to the end of the model numbe
UL/CSA approved models have UL approved wiring
(AWG20 UL1015).
2. Actuator
None: Pin plunger
L1A : Short hinge lever
L1 : Hinge lever
Consult your OMRON sales representative for details.
5. Length of the molded lead wire
None: 300 mm
L1B : Long hinge lever
L2A : Short hinge roller lever
L2 : Hinge roller lever
L3 : Simulated roller lever
-0 : 1,000 mm
3. Contact form
-1 : SPDT
-2 : SPST-NC
-3 : SPST-NO
1
D2VW
Sealed Miniature Basic Switch
List of Models
Ratings
Contact form
SPDT
5 A
0.1 A
Actuator
Terminals
D2VW-5-1
D2VW-01-1
Solder terminals
SPST-NC
SPST-NO
SPDT
D2VW-5-2
D2VW-01-2
D2VW-5-3
D2VW-01-3
Pin plunger
D2VW-5-1M
D2VW-01-1M
Molded lead wires (300 mm)
Molded lead wires (1,000 mm)
Solder terminals
SPST-NC
SPST-NO
SPDT
D2VW-5-2M
D2VW-01-2M
D2VW-5-3M
D2VW-01-3M
D
2
D2VW-5-1M-0
D2VW-5L1A-1
D2VW-5L1A-2
D2VW-5L1A-3
D2VW-5L1A-1M
D2VW-5L1A-2M
D2VW-5L1A-3M
D2VW-5L1A-1M-0
D2VW-5L1-1
D2VW-01-1M-0
D2VW-01L1A-1
D2VW-01L1A-2
D2VW-01L1A-3
D2VW-01L1A-1M
D2VW-01L1A-2M
D2VW-01L1A-3M
D2VW-01L1A-1M-0
D2VW-01L1-1
SPDT
V
W
SPST-NC
SPST-NO
SPDT
Short hinge lever
Molded lead wires (300 mm)
Molded lead wires (1,000 mm)
Solder terminals
SPST-NC
SPST-NO
SPDT
SPDT
SPST-NC
SPST-NO
SPDT
D2VW-5L1-2
D2VW-01L1-2
D2VW-5L1-3
D2VW-01L1-3
Hinge lever
D2VW-5L1-1M
D2VW-5L1-2M
D2VW-5L1-3M
D2VW-5L1-1M-0
D2VW-5L1B-1
D2VW-5L1B-2
D2VW-5L1B-3
D2VW-5L1B-1M
D2VW-5L1B-2M
D2VW-5L1B-3M
D2VW-5L1B-1M-0
D2VW-5L2A-1
D2VW-5L2A-2
D2VW-5L2A-3
D2VW-5L2A-1M
D2VW-5L2A-2M
D2VW-5L2A-3M
D2VW-5L2A-1M-0
D2VW-5L2-1
D2VW-01L1-1M
D2VW-01L1-2M
D2VW-01L1-3M
D2VW-01L1-1M-0
D2VW-01L1B-1
D2VW-01L1B-2
D2VW-01L1B-3
D2VW-01L1B-1M
D2VW-01L1B-2M
D2VW-01L1B-3M
D2VW-01L1B-1M-0
D2VW-01L2A-1
D2VW-01L2A-2
D2VW-01L2A-3
D2VW-01L2A-1M
D2VW-01L2A-2M
D2VW-01L2A-3M
D2VW-01L2A-1M-0
D2VW-01L2-1
Molded lead wires (300 mm)
Molded lead wires (1,000 mm)
Solder terminals
SPST-NC
SPST-NO
SPDT
SPDT
SPST-NC
SPST-NO
SPDT
Long hinge lever
Short hinge roller lever
Hinge roller lever
Simulated roller lever
Molded lead wires (300 mm)
Molded lead wires (1,000 mm)
Solder terminals
SPST-NC
SPST-NO
SPDT
SPDT
SPST-NC
SPST-NO
SPDT
Molded lead wires (300 mm)
Molded lead wires (1,000 mm)
Solder terminals
SPST-NC
SPST-NO
SPDT
SPDT
SPST-NC
SPST-NO
SPDT
D2VW-5L2-2
D2VW-01L2-2
D2VW-5L2-3
D2VW-01L2-3
D2VW-5L2-1M
D2VW-5L2-2M
D2VW-5L2-3M
D2VW-5L2-1M-0
D2VW-5L3-1
D2VW-01L2-1M
D2VW-01L2-2M
D2VW-01L2-3M
D2VW-01L2-1M-0
D2VW-01L3-1
Molded lead wires (300 mm)
Molded lead wires (1,000 mm)
Solder terminals
SPST-NC
SPST-NO
SPDT
SPDT
SPST-NC
SPST-NO
SPDT
D2VW-5L3-2
D2VW-01L3-2
D2VW-5L3-3
D2VW-01L3-3
D2VW-5L3-1M
D2VW-5L3-2M
D2VW-5L3-3M
D2VW-5L3-1M-0
D2VW-01L3-1M
D2VW-01L3-2M
D2VW-01L3-3M
D2VW-01L3-1M-0
Molded lead wires (300 mm)
Molded lead wires (1,000 mm)
SPST-NC
SPST-NO
SPDT
Separator (Sold Separately), Actuator (Sold Separately), Terminal Connector (Sold Separately)
Refer to "Basic Switch Common Accessories"
2
D2VW
Sealed Miniature Basic Switch
●Safety Standard Approved Models
Ratings
5A
0.1A
Actuator
Terminals
Contact form
Solder terminals
D2VW-5-1HS
D2VW-01-1HS
Pin plunger
Molded lead wires (300 mm)
Solder terminals
D2VW-5-1MS
D2VW-01-1MS
D2VW-5L1A-1HS
D2VW-5L1A-1MS
D2VW-5L1-1HS
D2VW-5L1-1MS
D2VW-5L1B-1HS
D2VW-5L1B-1MS
D2VW-5L2A-1HS
D2VW-5L2A-1MS
D2VW-5L2-1HS
D2VW-5L2-1MS
D2VW-5L3-1HS
D2VW-5L3-1MS
D2VW-01L1A-1HS
D2VW-01L1A-1MS
D2VW-01L1-1HS
D2VW-01L1-1MS
D2VW-01L1B-1HS
D2VW-01L1B-1MS
D2VW-01L2A-1HS
D2VW-01L2A-1MS
D2VW-01L2-1HS
D2VW-01L2-1MS
D2VW-01L3-1HS
D2VW-01L3-1MS
Short hinge lever
Hinge lever
Molded lead wires (300 mm)
Solder terminals
Molded lead wires (300 mm)
Solder terminals
D
2
V
Long hinge lever
Short hinge roller lever
Hinge roller lever
Simulated roller lever
SPDT
Molded lead wires (300 mm)
Solder terminals
W
Molded lead wires (300 mm)
Solder terminals
Molded lead wires (300 mm)
Solder terminals
Molded lead wires (300 mm)
Contact Form
●SPDT
●SPST-NC
●SPST-NO
NC (Red)
NO (Blue)
COM (Black)
NC (Red)
COM (Black)
NO (Blue)
COM (Black)
The color in parentheses indicates
the color of the lead wire.
Contact Specifications
Approved Safety Standards
Consult your OMRON sales representative for specific models
with UL/CSA, VDE approvals.
Item
Model
D2VW-5 models
Rivet
D2VW-01 models
Crossbar
Specification
Material
UL (UL1054)/CSA (CSA C22.2 No.55)
Contact
Silver alloy
Gold alloy
Ratedvoltage
Model
D2VW-5
D2VW-01
Gap (standard value)
0.5 mm
125 VAC
3 A
3 A
0.1 A
-
NC
NO
15A max.
15A max.
-
-
Inrush
current
250 VAC
30 VDC
-
0.1 A
Minimum applicable load
(reference value) *
5 VDC 160 mA
5 VDC 1 mA
VDE (EN61058-1)
*
Please refer to "Using Micro Loads" in "●Precautions" for more
information on the minimum applicable load.
Rated voltage
125 VAC
250 VAC
Model
D2VW-5
D2VW-01
-
0.1 A
-
3 A
Ratings
Testing conditions: D2VW-5 25E3 (25,000 operations)
T55 (0 to 55°C)
Item
Rated voltage
Resistive load
Model
D2VW-01 1E5 (100,000 operations)
T85 (0 to 85°C)
250 VAC
125 VAC
5 A
5 A
D2VW-5 models
30 VDC
125 VAC
30 VDC
5 A
0.1 A
0.1 A
D2VW-01 models
Note. The above rating values apply under the following test conditions.
(1) Ambient temperature: 20 2°C
(2) Ambient humidity: 65 5%
(3) Operating frequency: 30 operations/min
Separator (Sold Separately), Actuator (Sold Separately), Terminal Connector (Sold Separately)
Refer to "Micro Switch Common Accessories"
3
D2VW
Sealed Miniature Basic Switch
Characteristics
Mounting Holes (Unit: mm)
2-3.1 dia. mounting holes
or M3 screw holes
Item
Model
D2VW-5 models
D2VW-01 models
Permissible operating speed
0.1mm to 1m/s (for pin plunger models)
300 operations/min
Permissible
operating
frequency
Mechanical
Electrical
60 operations/min
0.1
10.3
Insulation resistance
Terminal models
100 MΩ min. (500 VDC with insulation tester)
50 m
Ω
max.
0.1
22.2
Contact
Molded lead wire
100 m
200 m
Ω
Ω
max.
resistance
(initial value)
terminals (300mm)
Molded lead wire
max.
terminals (1,000mm)
D
2
Between terminals of the
same polarity
1,000 VAC 50/60 Hz for 1 min
1,500 VAC 50/60 Hz for 1 min
V
W
Betweencurrent-carrying
metal parts and ground
Dielectric
strength *1
Between terminals and
non-current-carrying
metal parts
1,500 VAC 50/60 Hz for 1 min
Vibration
resistance *2
Malfunction
10 to 55 Hz, 1.5 mm double amplitude
Destruction
Malfunction *2
Mechanical
1,000m/s2 {approx. 100G} max.
300m/s2 {approx. 30G} max.
Shock
resistance
10,000,000 operations min. (60 operations/min)
100,000 operations min. 1,000,000 operations min.
Durability *3
Electrical
(30 operations/min)
(30 operations/min)
Terminal models
IEC IP67 (excluding the terminals on terminal models)
IEC IP67
Degree of
protection
Molded lead wire models
Degree of protection against electric
shock
Class l
Proof tracking index (PTI)
175
–40°C to
+
85°C (at ambient humidity of 60% max.)
(with no icing or condensation)
95% max. (for 5°C to 35°C)
Approx. 7 g (for pin plunger models with terminals)
Ambient operating temperature
Ambient operating humidity
Weight
+
+
Note. The data given above are initial values.
*1. The dielectric strength shown in the table indicates the value for models
with a Separator (refer to "Basic Switch Common Accessories").
*2. For the pin plunger models, the above values apply for use at the free
position and total travel position. For the lever models, they apply at the
total travel position. Close or open circuit of the contact is 1 ms max.
*3. For testing conditions, consult your OMRON sales representative.
Dimensions (Unit: mm) and Operating Characteristics
The illustrations and dimensions are for pin plunger models.
Dimensions and operation characteristics of other actuator models are the same as those of molded lead
wires models.
Models with solder terminals
●Pin Plunger Models
D2VW-5-1
D2VW-01-1
2.4 dia. holes 1.3 dia. holes
10.3
4.75
Operating Force
Releasing Force
OF Max.
RF Min.
1.96 N {200 gf}
0.29 N {30 gf}
1.2
5.2
Pretravel
Overtravel
Movement Differential MD Max.
PT Max.
OT Min.
1.2 mm
1.0 mm
0.4 mm
8.4
3.1+0.13
0.25
Operating Position OP
14.7 0.4 mm
20.2
PT
2.5 dia.
-0.03 dia. holes
2.8
A
0.5
2.5
5.2
OP
0.1
15.9
10.3
5.2
+0.13
-0.03
0.1
3.1
3.2
dia.
0.1
22.2
2.8
t0.5
3-Solder terminals
33
Note 1. Unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions.
Note 2. The operating characteristics are for operation in the A direction ( ).
4
D2VW
Sealed Miniature Basic Switch
The illustration and drawing shown is the SPDT model. SPST-NC model and SPST-NO model are omitted.
Models with molded lead wires
●Pin Plunger Models
D2VW-5-1M
D2VW-5-1M-0
AV0.75f molded lead wire (red)*
0.25
20.2
AV0.75f molded lead wire (blue)*
3.1+0.13
ꢀ0.03 dia. holes
PT
2.5 dia.
2.8
AV0.75f molded lead wire (black)*
A
Operating Force
Releasing Force
OF Max. 1.96 N {200 gf}
RF Min. 0.29 N {30 gf}
D2VW-01-1M
D2VW-01-1M-0
OP
0.1
15.9
10.3
Pretravel
Overtravel
Movement Differential MD Max.
PT Max.
OT Min.
1.2 mm
1.0 mm
0.4 mm
+0.13
0.1
3.1
3.2
dia.
10.3
(5)
-0.03
D
2
0.1
Operating Position OP
14.7±0.4 mm
2.8
22.2
33
L
V
W
* UL/CSA approved models have UL
approved wiring (AWG20 UL1015).
Dimensions
L
300 mm type 1,000 mm type
300 10
1,000 30
●Short Hinge Lever Models
D2VW-5L1A-1M
0.8
24.3
4.3
Operating Force
Releasing Force
OF Max. 1.96 N {200 gf}
5
D2VW-5L1A-1M-0
D2VW-01L1A-1M
D2VW-01L1A-1M-0
PT
t=0.5*
RF Min.
0.20 N {20 gf}
A
Pretravel
Overtravel
Movement Differential MD Max.
PT Max.
OT Min.
1.6 mm
0.8 mm
0.5 mm
OP
15.9
Operating Position
OP
15.2 0.5 mm
10.3
* Stainless-steel lever
●Hinge Lever Models
D2VW-5L1-1M
D2VW-5L1-1M-0
D2VW-01L1-1M
0.8
35.6
A
4.3
PT
Operating Force
Releasing Force
OF Max. 1.18 N {120 gf}
RF Min. 0.15 N {15 gf}
5
t=0.5*
Pretravel
Overtravel
Movement Differential MD Max.
PT Max.
OT Min.
4.0 mm
1.6 mm
0.8 mm
D2VW-01L1-1M-0
OP
15.9
Operating Position
OP
15.2 1.2 mm
10.3
* Stainless-steel lever
●Long Hinge Lever Models
D2VW-5L1B-1M
D2VW-5L1B-1M-0
D2VW-01L1B-1M
A
PT
0.8
59.4
Operating Force
Releasing Force
OF Max. 0.59 N {60 gf}
4.3
5
t=0.5*
RF Min.
0.05 N {5 gf}
Pretravel
Overtravel
Movement Differential MD Max.
PT Max.
OT Min.
9.0 mm
3.2 mm
2.0 mm
D2VW-01L1B-1M-0
OP
15.9
Operating Position
OP
15.2 2.6 mm
10.3
* Stainless-steel lever
●Simulated Roller Lever Models
D2VW-5L3-1M
0.8
32.6
Operating Force
Releasing Force
OF Max. 1.18N {120 gf}
5
PT
A
D2VW-5L3-1M-0
D2VW-01L3-1M
D2VW-01L3-1M-0
R3.5
4.3
RF Min.
0.15N {15 gf}
t=0.5*
Pretravel
Overtravel
Movement Differential MD Max.
PT Max.
OT Min.
4.0 mm
1.6 mm
0.8 mm
OP
15.9
Operating Position OP
18.7 1.2 mm
10.3
* Stainless-steel lever
Note 1. Unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions.
Note 2. The operating characteristics are for operation in the A direction ( ).
5
D2VW
Sealed Miniature Basic Switch
Models with molded lead wires
●Short Hinge Roller Lever Models
D2VW-5L2A-1M
D2VW-5L2A-1M-0
0.8
24.3
*2
0.8
20.1
Operating Force
Releasing Force
OF Max. 2.25 N {230 gf}
4.8×4.8 dia.
D2VW-01L2A-1M
5
A
PT
7.2
RF Min.
0.20 N {20 gf}
*1
t=0.5
D2VW-01L2A-1M-0
Pretravel
Overtravel
Movement Differential MD Max.
PT Max.
OT Min.
1.6 mm
0.8 mm
0.5 mm
OP
D
2
Operating Position
OP
20.7 0.6 mm
15.9
V
*1. Stainless-steel lever
*2. Polyacetal resin roller
10.3
W
●Hinge roller lever
D2VW-5L2-1M
D2VW-5L2-1M-0
D2VW-01L2-1M
D2VW-01L2-1M-0
0.8
34
Operating Force
Releasing Force
OF Max. 1.18 N {120 gf}
5
A
4.8×4.8 *2 dia.
PT
RF Min.
0.15 N {15 gf}
7.2
t=0.5 *1
Pretravel
Overtravel
Movement Differential MD Max.
PT Max.
OT Min.
4.0 mm
1.6 mm
0.8 mm
OP
Operating Position OP
20.7 1.2 mm
15.9
*1. Stainless-steel lever
*2. Polyacetal resin roller
10.3
Note 1. Unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions.
Note 2. The operating characteristics are for operation in the A direction ( ).
6
D2VW
Sealed Miniature Basic Switch
Precautions
★Please refer to "Basic Switches Common Precautions" for correct use.
Cautions
Correct Use
●Degree of Protection
●Mounting
Do not use the Switch underwater.
Use M3 mounting screw with plane washers or spring washers to
securely mount the Switch. Tighten the screws to a torque of
0.39 to 0.59 N·m {4 to 6 kgf·cm}.
The Switch was tested and found to meet the conditions
necessary to meet the following standard, however, the test
checks for water intrusion after immersion for a specified time
period, not for switching operation underwater.
JIS C0920:
●Operating Body
D
2
With the pin plunger models, set
the Switch so that the plunger can
be pushed in from directly above.
Since the plunger is covered with
a rubber cap, applying a force
from lateral directions may cause
damage to the plunger or
V
Degrees of protection provided by enclosures of electrical
apparatus (IP Code)
W
IEC 60529:
Degrees of protection provided by enclosures (IP Code)
Degree of protection: IP67
(check water intrusion after immersion
for 30 min submerged 1 m underwater)
reduction in the sealing capability.
●Handling
●Protection Against Chemicals
Handle the Switch carefully so as not to break the sealing
rubber.
Prevent the Switch from coming into contact with oil or
chemicals.
Otherwise, damage to or deterioration of Switch materials may
result.
●Using Micro Loads
Using a model for ordinary loads to open or close the contact of
a micro load circuit may result in faulty contact. Use models that
operate in the following range. However, even when using micro
load models within the following operating range, if inrush
current occurs when the contact is opened or closed, it may
increase the contact wear and so decrease durability. Therefore,
insert a contact protection circuit where necessary. The N-level
reference value applies for the minimum applicable load. This
value indicates the malfunction reference level for the reliability
level of 60% (λ60).
●Soldering
• Connecting to Solder Terminals
When soldering the lead wire to the terminal, first insert the
lead wire conductor through the terminal hole and then
conduct soldering.
Complete the soldering at the iron tip temperature between
350 to 400°C within 3 seconds, and do not apply any external
force for 1 minute after soldering. Soldering at a excessively
high temperature or soldering for more than 3 s may
deteriorate the characteristics of the Switch.
(JIS C5003)
The equation, λ60=0.5×10-6/operations indicates that the
estimated malfunction rate is less than
with a reliability level of 60%.
1
operations
2,000,000
0.16 mA
26 mA 100 mA
30
24
Operating
range for
general-load
models
Operating range for
micro load models
D2VW-01
D2VW-5
12
5
0
1 mA
100mA 160 mA
0.1
1
10
100
1,000
Current (mA)
7
D2VW
Sealed Miniature Basic Switch
D
2
V
W
• Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product.
• Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad
systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious
influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or
equipment, and be sure to provide the system or equipment with double safety mechanisms.
Note: Do not use this document to operate the Unit.
OMRON Corporation
ELECTRONIC AND MECHANICAL COMPONENTS COMPANY
Contact: www.omron.com/ecb
Cat. No. C095-E1-05
0812(0207)(O)
8
相关型号:
D2VW-5L1-1M
Snap Acting/Limit Switch, SPDT, Momentary, 5A, 30VDC, 5.6mm, Wire Terminal, Hinge Lever Actuator, Panel Mount, ROHS COMPLIANT
OMRON
©2020 ICPDF网 联系我们和版权申明