D4N-1A31 [OMRON]
Snap Acting/Limit Switch, DPST, Momentary, 2.5A, 250VDC, 6mm, Screw Terminal, Top Plunger Actuator, Panel Mount;型号: | D4N-1A31 |
厂家: | OMRON ELECTRONICS LLC |
描述: | Snap Acting/Limit Switch, DPST, Momentary, 2.5A, 250VDC, 6mm, Screw Terminal, Top Plunger Actuator, Panel Mount 开关 |
文件: | 总20页 (文件大小:5625K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Safety Limit Switch
D4N
Popular Safety Limit Switches
Providing a Full Lineup Conforming to
International Standards
CSM_D4N_DS_E_6_1
Note: Contact your sales representative for details on models
with safety standard certification.
• Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and
3NC contact forms.
(Slow-action models with MBB contacts are available.)
• M12-connector models are also available, saving on labor and
simplifying replacement.
•
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
• Conforms to EN115, EN81-1, and EN81-2 (slow-action models
only).
• Certified standards: UL, EN (TÜV), and CCC
Be sure to read the “Safety Precautions” on page 17.
Model Number Structure
Model Number Legend
1-Conduit Models
2-Conduit Models
D4N-@@@@
D4N-@@@@
1 2
3
1 2
3
1. Conduit size
1: Pg13.5
1. Conduit size
6: G1/2
2: G1/2
8: M20
4: M20
9: M12 connector
2. Built-in Switch
1: 1NC/1NO (snap-action)
2: 2NC (snap-action)
2. Built-in Switch
1: 1NC/1NO (snap-action)
2: 2NC (snap-action)
A: 1NC/1NO (slow-action)
B: 2NC (slow-action)
A: 1NC/1NO (slow-action)
B: 2NC (slow-action)
C: 2NC/1NO (slow-action)
D: 3NC (slow-action)
C: 2NC/1NO (slow-action)
D: 3NC (slow-action)
E: 1NC/1NO (MBB contact) (slow-action)
F: 2NC/1NO (MBB contact) (slow-action)
E: 1NC/1NO (MBB contact) (slow-action)
F: 2NC/1NO (MBB contact) (slow-action)
3. Head and Actuator
3. Head and Actuator
20: Roller lever (resin lever, resin roller)
22: Roller lever (metal lever, resin roller)
25: Roller lever (metal lever, metal roller)
26: Roller lever (metal lever, bearing roller)
2G:Adjustable roller lever, form lock (metal lever, resin roller)
2H: Adjustable roller lever, form lock (metal lever, rubber roller)
31: Top Plunger
20: Roller lever (resin lever, resin roller)
22: Roller lever (metal lever, resin roller)
25: Roller lever (metal lever, metal roller)
26: Roller lever (metal lever, bearing roller)
2G:Adjustable roller lever, form lock (metal lever, resin roller)
2H: Adjustable roller lever, form lock (metal lever, rubber roller)
31: Top Plunger
32: Top Roller Plunger
32: Top Roller Plunger
62: One-way roller arm lever (horizontal)
72: One-way roller arm lever (vertical)
80: Cat whisker
62: One-way roller arm lever (horizontal)
72: One-way roller arm lever (vertical)
87: Plastic rod
RE:Fork lever lock (right operation)
LE: Fork lever lock (left operation)
1
D4N
Ordering Information
List of Models
Consult with your OMRON representative when ordering any models that are not listed in this table.
Switches with Two Contacts (with Direct Opening Mechanism)
Built-in switch mechanism
1NC/1NO
(Snap-action)
2NC
(Snap-action)
1NC/1NO
(Slow-action)
2NC
(Slow-action)
Actuator
Conduit size
Direct
opening
Direct
opening
Direct
opening
Direct
opening
Model
Model
Model
Model
Roller lever (resin
lever, resin roller)
Pg13.5
G1/2
M20
M12 connector
G1/2
M20
Pg13.5
G1/2
M20
M12 connector
G1/2
D4N-1120
D4N-2120
D4N-4120
D4N-9120
D4N-6120
D4N-8120
D4N-1122
D4N-2122
D4N-4122
D4N-9122
D4N-6122
D4N-8122
D4N-1125
D4N-1220
D4N-2220
D4N-4220
D4N-9220
D4N-6220
D4N-8220
D4N-1222
D4N-2222
D4N-4222
D4N-9222
D4N-6222
D4N-8222
D4N-1225
D4N-1A20
D4N-2A20
D4N-4A20
D4N-9A20
D4N-6A20
D4N-8A20
D4N-1A22
D4N-2A22
D4N-4A22
D4N-9A22
D4N-6A22
D4N-8A22
D4N-1A25
D4N-1B20
D4N-2B20
D4N-4B20
D4N-9B20
D4N-6B20
D4N-8B20
D4N-1B22
D4N-2B22
D4N-4B22
D4N-9B22
D4N-6B22
D4N-8B22
D4N-1B25
1-conduit
2-conduit
1-conduit
2-conduit
Roller lever (metal
lever, resin roller)
M20
Pg13.5
Roller lever (metal
lever, metal roller)
G1/2
D4N-2125
D4N-4125
D4N-9125
D4N-1126
D4N-2126
D4N-4126
D4N-2225
D4N-4225
D4N-9225
D4N-1226
D4N-2226
D4N-4226
D4N-2A25
D4N-4A25
D4N-9A25
D4N-1A26
D4N-2A26
D4N-4A26
D4N-2B25
D4N-4B25
D4N-9B25
D4N-1B26
D4N-2B26
D4N-4B26
1-conduit
1-conduit
M20
M12 connector
Pg13.5
G1/2
Roller lever (metal
lever, bearing roller)
M20
M12 connector
Pg13.5
G1/2
M20
M12 connector
G1/2
D4N-9126
D4N-112G
D4N-212G
D4N-412G
D4N-912G
D4N-612G
D4N-812G
D4N-9226
D4N-122G
D4N-222G
D4N-422G
D4N-922G
D4N-622G
D4N-822G
D4N-9A26
D4N-1A2G
D4N-2A2G
D4N-4A2G
D4N-9A2G
D4N-6A2G
D4N-8A2G
D4N-9B26
D4N-1B2G
D4N-2B2G
D4N-4B2G
D4N-9B2G
D4N-6B2G
D4N-8B2G
Adjustable roller
lever, form lock
(metal lever, resin
roller)
1-conduit
2-conduit
M20
Adjustable roller
lever, form lock
(metal lever, rubber
roller)
Pg13.5
G1/2
D4N-112H
D4N-212H
D4N-412H
D4N-912H
D4N-612H
D4N-812H
D4N-122H
D4N-222H
D4N-422H
D4N-922H
D4N-622H
D4N-822H
D4N-1A2H
D4N-2A2H
D4N-4A2H
D4N-9A2H
D4N-6A2H
D4N-8A2H
D4N-1B2H
D4N-2B2H
D4N-4B2H
D4N-9B2H
D4N-6B2H
D4N-8B2H
1-conduit
2-conduit
M20
M12 connector
G1/2
M20
Plunger
Pg13.5
G1/2
M20
M12 connector
G1/2
M20
Pg13.5
G1/2
M20
M12 connector
G1/2
M20
Pg13.5
G1/2
M20
M12 connector
G1/2
M20
Pg13.5
G1/2
M20
M12 connector
G1/2
M20
D4N-1131
D4N-2131
D4N-4131
D4N-9131
D4N-6131
D4N-8131
D4N-1132
D4N-2132
D4N-4132
D4N-9132
D4N-6132
D4N-8132
D4N-1162
D4N-2162
D4N-4162
D4N-9162
D4N-6162
D4N-8162
D4N-1172
D4N-2172
D4N-4172
D4N-9172
D4N-6172
D4N-8172
D4N-1231
D4N-2231
D4N-4231
D4N-9231
D4N-6231
D4N-8231
D4N-1232
D4N-2232
D4N-4232
D4N-9232
D4N-6232
D4N-8232
D4N-1262
D4N-2262
D4N-4262
D4N-9262
D4N-6262
D4N-8262
D4N-1272
D4N-2272
D4N-4272
D4N-9272
D4N-6272
D4N-8272
D4N-1A31
D4N-2A31
D4N-4A31
D4N-9A31
D4N-6A31
D4N-8A31
D4N-1A32
D4N-2A32
D4N-4A32
D4N-9A32
D4N-6A32
D4N-8A32
D4N-1A62
D4N-2A62
D4N-4A62
D4N-9A62
D4N-6A62
D4N-8A62
D4N-1A72
D4N-2A72
D4N-4A72
D4N-9A72
D4N-6A72
D4N-8A72
D4N-1B31
D4N-2B31
D4N-4B31
D4N-9B31
D4N-6B31
D4N-8B31
D4N-1B32
D4N-2B32
D4N-4B32
D4N-9B32
D4N-6B32
D4N-8B32
D4N-1B62
D4N-2B62
D4N-4B62
D4N-9B62
D4N-6B62
D4N-8B62
D4N-1B72
D4N-2B72
D4N-4B72
D4N-9B72
D4N-6B72
D4N-8B72
1-conduit
2-conduit
1-conduit
2-conduit
1-conduit
2-conduit
1-conduit
2-conduit
Roller plunger
One-way roller arm
lever (horizontal)
One-way roller arm
lever (vertical)
2
D4N
Switches with Three Contacts and MBB Contacts (with Direct Opening Mechanism)
Built-in switch mechanism
2NC/1NO
(Slow-action)
3NC
(Slow-action)
1NC/1NO MBB
(Slow-action)
2NC/1NO MBB
(Slow-action)
Actuator
Conduit size
Direct
opening
Direct
opening
Direct
opening
Direct
opening
Model
Model
Model
Model
Roller lever (resin
lever, resin roller)
Pg13.5
G1/2
M20
M12 connector
G1/2
M20
Pg13.5
G1/2
M20
M12 connector
G1/2
D4N-1C20
D4N-2C20
D4N-4C20
D4N-1D20
D4N-2D20
D4N-4D20
D4N-1E20
D4N-2E20
D4N-4E20
D4N-9E20
D4N-6E20
D4N-8E20
D4N-1E22
D4N-2E22
D4N-4E22
D4N-9E22
D4N-6E22
D4N-8E22
D4N-1F20
D4N-2F20
D4N-4F20
1-conduit
2-conduit
1-conduit
2-conduit
---
---
---
---
---
---
D4N-6C20
D4N-8C20
D4N-1C22
D4N-2C22
D4N-4C22
D4N-6D20
D4N-8D20
D4N-1D22
D4N-2D22
D4N-4D22
D4N-6F20
D4N-8F20
D4N-1F22
D4N-2F22
D4N-4F22
Roller lever (metal
lever, resin roller)
D4N-6C22
D4N-8C22
D4N-1C25
D4N-2C25
D4N-4C25
D4N-6D22
D4N-8D22
D4N-1D25
D4N-2D25
D4N-4D25
D4N-6F22
D4N-8F22
D4N-1F25
D4N-2F25
D4N-4F25
M20
Roller lever (metal
lever, metal roller)
Pg13.5
G1/2
D4N-1E25
D4N-2E25
D4N-4E25
D4N-9E25
D4N-1E26
D4N-2E26
D4N-4E26
1-conduit
1-conduit
M20
M12 connector
Pg13.5
G1/2
---
---
---
---
---
Roller lever (metal
lever, bearing roller)
D4N-1C26
D4N-2C26
D4N-4C26
D4N-1D26
D4N-2D26
D4N-4D26
D4N-1F26
D4N-2F26
D4N-4F26
M20
M12 connector
Pg13.5
G1/2
M20
M12 connector
G1/2
D4N-9E26
D4N-1E2G
D4N-2E2G
D4N-4E2G
D4N-9E2G
D4N-6E2G
D4N-8E2G
---
---
Adjustable roller
lever, form lock
(metal lever, resin
roller)
D4N-1C2G
D4N-2C2G
D4N-4C2G
D4N-1D2G
D4N-2D2G
D4N-4D2G
D4N-1F2G
D4N-2F2G
D4N-4F2G
1-conduit
2-conduit
---
---
D4N-6C2G
D4N-8C2G
D4N-6D2G
D4N-8D2G
D4N-6F2G
D4N-8F2G
M20
Adjustable roller
lever, form lock
(metal lever, rubber
roller)
Pg13.5
G1/2
D4N-1C2H
D4N-2C2H
D4N-4C2H
D4N-1D2H
D4N-2D2H
D4N-4D2H
D4N-1E2H
D4N-2E2H
D4N-4E2H
D4N-9E2H
D4N-6E2H
D4N-8E2H
D4N-1F2H
D4N-2F2H
D4N-4F2H
1-conduit
2-conduit
M20
M12 connector
G1/2
---
---
---
D4N-6C2H
D4N-8C2H
D4N-6D2H
D4N-8D2H
D4N-6F2H
D4N-8F2H
M20
Plunger
Pg13.5
G1/2
M20
M12 connector
G1/2
M20
Pg13.5
G1/2
M20
M12 connector
G1/2
M20
Pg13.5
G1/2
M20
M12 connector
G1/2
M20
Pg13.5
G1/2
M20
M12 connector
G1/2
M20
D4N-1C31
D4N-2C31
D4N-4C31
D4N-1D31
D4N-2D31
D4N-4D31
D4N-1E31
D4N-2E31
D4N-4E31
D4N-9E31
D4N-6E31
D4N-8E31
D4N-1E32
D4N-2E32
D4N-4E32
D4N-9E32
D4N-6E32
D4N-8E32
D4N-1E62
D4N-2E62
D4N-4E62
D4N-9E62
D4N-6E62
D4N-8E62
D4N-1E72
D4N-2E72
D4N-4E72
D4N-9E72
D4N-6E72
D4N-8E72
D4N-1F31
D4N-2F31
D4N-4F31
1-conduit
2-conduit
1-conduit
2-conduit
1-conduit
2-conduit
1-conduit
2-conduit
---
---
---
---
---
---
---
---
---
---
---
---
D4N-6C31
D4N-8C31
D4N-1C32
D4N-2C32
D4N-4C32
D4N-6D31
D4N-8D31
D4N-1D32
D4N-2D32
D4N-4D32
D4N-6F31
D4N-8F31
D4N-1F32
D4N-2F32
D4N-4F32
Roller plunger
D4N-6C32
D4N-8C32
D4N-1C62
D4N-2C62
D4N-4C62
D4N-6D32
D4N-8D32
D4N-1D62
D4N-2D62
D4N-4D62
D4N-6F32
D4N-8F32
D4N-1F62
D4N-2F62
D4N-4F62
One-way roller arm
lever (horizontal)
D4N-6C62
D4N-8C62
D4N-1C72
D4N-2C72
D4N-4C72
D4N-6D62
D4N-8D62
D4N-1D72
D4N-2D72
D4N-4D72
D4N-6F62
D4N-8F62
D4N-1F72
D4N-2F72
D4N-4F72
One-way roller arm
lever (vertical)
D4N-6C72
D4N-8C72
D4N-6D72
D4N-8D72
D4N-6F72
D4N-8F72
3
D4N
General-purpose Switches with Two Contacts
Built-in switch mechanism
1NC/1NO
(Snap-action)
2NC
(Snap-action)
1NC/1NO
(Slow-action)
2NC
(Slow-action)
Actuator
Conduit size
Direct
opening
Direct
opening
Direct
opening
Direct
opening
Model
Model
Model
Model
Fork lever lock
(right operation)
G1/2
M20
G1/2
M20
G1/2
D4N-2ARE
D4N-4ARE
D4N-2ALE
D4N-4ALE
D4N-2BRE
D4N-4BRE
D4N-2BLE
D4N-4BLE
D4N-2B80
---
---
---
Fork lever lock (left
operation)
1-conduit
---
Cat whisker
Plastic rod
D4N-2180
D4N-4180
D4N-2187
D4N-4187
D4N-2280
D4N-4280
D4N-2287
D4N-4287
M20
G1/2
M20
D4N-4B80
D4N-2B87
D4N-4B87
---
---
---
Note: Mechanically speaking, these models are general-purpose switches with no direct opening mechanism.
General-purpose Switches with Three Contacts and MBB Contacts
Built-in switch mechanism
2NC/1NO
(Slow-action)
3NC
(Slow-action)
1NC/1NO MBB
(Slow-action)
2NC/1NO MBB
(Slow-action)
Actuator
Conduit size
Direct
opening
Direct
opening
Direct
opening
Direct
opening
Model
Model
Model
Model
Fork lever lock
(right operation)
G1/2
M20
G1/2
M20
G1/2
D4N-2CRE
D4N-4CRE
D4N-2CLE
D4N-4CLE
D4N-2DRE
D4N-4DRE
D4N-2DLE
D4N-4DLE
D4N-2D80
D4N-2ERE
D4N-4ERE
D4N-2ELE
D4N-4ELE
D4N-2FRE
D4N-4FRE
D4N-2FLE
D4N-4FLE
---
---
---
Fork lever lock
(left operation)
1-conduit
---
Cat whisker
Plastic rod
M20
G1/2
M20
D4N-4D80
D4N-2D87
D4N-4D87
---
---
---
Note: Mechanically speaking, these models are general-purpose switches with no direct opening mechanism.
4
D4N
Specifications
Standards and EC Directives
Conforms to the following EC Directives:
Certified Standard Ratings
TÜV (EN60947-5-1), CCC (GB14048.5)
• Machinery Directive
• Low Voltage Directive
• EN50047
• EN60204-1
• EN1088
Utilization
AC-15
DC-13
0.27 A
250 V
Item
category
Rated operating current (Ie) 3 A
Rated operating voltage (Ue) 240 V
• GS-ET-15
Note: Use a 10 A fuse type gI or gG that conforms to IEC60269 as a
short-circuit protection device. This fuse is not built into the
Switch.
Certified Standards
Certification
Standard
File No.
UL/CSA (UL508, CSA C22.2 No. 14)
A300
body
EN60947-5-1
TÜV SÜD
*1
(certified direct opening)
UL508, CSA C22.2 No.14 E76675
GB14048.5 2004010305105973
Current (A)
Make Break
Volt-amperes (VA)
Make Break
Rated
voltage
Carry current
UL *2
CQC (CCC) *3
120 VAC
240 VAC
60
30
6
3
10 A
7,200
720
*1. Consult your OMRON representative for details.
*2. Certification for CSA C22.2 No. 14 is authorized by the UL mark.
*3. Ask your OMRON representative for information on certified
models.
Q300
Current (A)
Volt-amperes (VA)
Make Break
Rated
Carry current
voltage
Make
Break
0.55
0.27
125 VDC
250 VDC
0.55
0.27
2.5 A
69
69
5
D4N
Characteristics
Degree of protection *1
IP67 (EN60947-5-1)
Mechanical
15,000,000 operations min. *5
Durability *2
500,000 operations min. (3 A resistive load at 250 VAC) *3
300,000 operations min. (10 A resistive load at 250 VAC)
Electrical
Operating speed
1 to 500 mm/s (D4N-1120)
30 operations/minute max.
25 mΩ max.
Operating frequency
Contact resistance
Minimum applicable load *4
Rated insulation voltage (Ui)
Rated frequency
1 mA resistive load at 5 VDC (N-level reference value)
300 V
50/60 Hz
Protection against electric shock
Pollution degree (operating environment)
Class II (double insulation)
3 (EN60947-5-1)
Between terminals of
same polarity
2.5 kV
4 kV
Impulse withstand
voltage
Between terminals of
different polarity
(EN60947-5-1)
Between each terminal
and non-current carrying 6 kV
metallic parts
Insulation resistance
Contact gap
100 MΩ min.
Snap-action: 2 × 0.5 mm min.
Slow-action: 2 × 2 mm min.
Vibration resistance Malfunction
10 to 55 Hz, 0.75 mm single amplitude
1,000 m/s2 min.
300 m/s2 min.
Destruction
Shock resistance
Malfunction
Conditional short-circuit current
Conventional free air thermal current (Ith)
Ambient operating temperature
Ambient operating humidity
100 A (EN60947-5-1)
10 A (EN60947-5-1)
−30 to 70°C (with no icing)
95% max.
Approx. 82 g (D4N-1120)
Approx. 99 g (D4N-6120)
Weight
Note: 1. The above values are initial values.
2. Once a contact has been used to switch a standard load, it cannot be used for a load of a smaller capacity.
Doing so may result in roughening of the contact surface and contact reliability may be lost.
*1. The degree of protection is tested using the method specified by the standard (EN60947-5-1). Confirm that sealing properties are sufficient for
the operating conditions and environment beforehand. Although the switch box is protected from dust or water penetration, do not use the D4N
in places where foreign material such as dust, dirt, oil, water, or chemicals may penetrate through the head. Otherwise, accelerated wear,
Switch damage or malfunctioning may occur.
*2. The durability is for an ambient temperature of 5 to 35°C and an ambient humidity of 40% to 70%. For more details, consult your
OMRON representative.
*3. Do not pass the 3 A, 250 VAC load through more than 2 circuits.
*4. This value will vary with the switching frequency, environment, and reliability level. Confirm that correct operation is possible with the actual
load beforehand.
*5. The mechanical durability of fork lever lock models is 10,000,000 operations min.
6
D4N
Structure and Nomenclature
Structure
Safety-oriented Lever Setting
(Form-lock construction)
Head
Grooves which engage the lever are cut in the lever and
rotary shaft to prevent the lever from slipping against the
rotary shaft.
The direction of the switch head can be varied to any of
the four directions. (Roller plunger models can be
mounted in either of two directions at a 90° angle.)
There are resin-lever and metal-lever types.
Conduit Opening
A wide variety of conduits is available.
Built-in Switch
Size
Box
1-conduit
Yes
2-conduit
The built-in switch has a direct opening mechanism
that forcibly separates the NC contact even when
there is contact deposit.
Pg13.5
G1/2
M20
---
Yes
Yes
---
Yes
Cover
Yes
The cover, with a hinge on its lower part, can
be opened by removing the screw of the
cover, which ensures ease of maintenance
and wiring.
M12 connector
Yes
Note: M12 connector types are not available for
Switches with three contacts.
Direct Opening Mechanism
1NC/1NO Contact (Slow-action)
2NC Contact (Slow-action)
Fixed contact (NC)
Fixed contact (NC)
Movable contact
Plunger
Contact spring
Return spring
Contact spring
Movable contact
Fixed contact (NO)
Plunger
Return spring
Conforms to EN60947-5-1 Direct Opening Operation
Conforms to EN60947-5-1 Direct Opening Operation
(Only the NC contact side has a direct opening
mechanism.)
When contact welding occurs, the contacts are
separated from each other by the plunger being
pushed in.
(Both NC contacts have a direct opening
mechanism.)
When contact welding occurs, the contacts are
separated from each other by the plunger being
pushed in.
7
D4N
Contact Form
Model
Contact
Contact form
Operating pattern
Remarks
Only NC contacts 31-32 have a
certified direct opening
mechanism.
Zb
13
31
14
32
13-14
31-32
1NC/1NO
(Snap-action)
ON
ON
ON
ON
D4N-@1@
D4N-@2@
D4N-@A@
D4N-@B@
Stroke
The terminals 13-14 and 31-32
can be used as unlike poles.
Only NC contacts 11-12 and
31-32 have a certified direct
opening mechanism.
Zb
Zb
11-12
31-32
11
31
12
32
2NC (Snap-action)
Stroke
Stroke
Stroke
The terminals 11-12 and 31-32
can be used as unlike poles.
Only NC contacts 11-12 have a
certified direct opening
mechanism.
11-12
33-34
1NC/1NO
(Slow-action)
11
33
12
34
The terminals 11-12 and 33-34
can be used as unlike poles.
Only NC contacts 11-12 and
31-32 have a certified direct
opening mechanism.
Zb
Zb
11-12
31-32
11
31
12
32
2NC (Slow-action)
The terminals 11-12 and 31-32
can be used as unlike poles.
Only NC contacts 11-12 and
21-22 have a certified direct
opening mechanism.
11-12
21-22
33-34
11
21
33
12
22
34
2NC/1NO
(Slow-action)
ON
D4N-@C@
D4N-@D@
The terminals 11-12, 21-22, and
33-34 can be used as unlike
poles.
Stroke
Only NC contacts 11-12, 21-22,
and 31-32 have a certified direct
opening mechanism.
Zb
11-12
21-22
31-32
11
21
31
12
22
32
ON
3NC (Slow-action)
The terminals 11-12, 21-22, and
31-32 can be used as unlike
poles.
Stroke
Stroke
Only NC contacts 11-12 have a
certified direct opening
mechanism.
Zb
Zb
11-12
33-34
1NC/1NO MBB *
(Slow-action)
11
33
12
34
ON
ON
D4N-@E@
D4N-@F@
The terminals 11-12 and 33-34
can be used as unlike poles.
Only NC contacts 11-12 and
21-22 have a certified direct
opening mechanism.
11-12
21-22
33-34
11
21
33
12
22
34
2NC/1NO MBB *
(Slow-action)
The terminals 11-12, 21-22 and
33-34 can be used as unlike poles.
Stroke
Note: Terminals are numbered according to EN50013 and the contact forms are according to IEC947-5-1.
* MBB (Make Before Break) contacts have an overlapping structure, so that before the normally closed contact (NC) opens, the normally open
contact (NO) closes.
8
D4N
Dimensions and Operating Characteristics
(Unit: mm)
Switches
1-conduit Models
Roller Lever (Resin Lever, Resin Roller)
Roller Lever (Metal Lever, Resin Roller)
D4N-1@20
D4N-2@20
D4N-1@22
D4N-2@22
D4N-4@20
D4N-9@20 *
D4N-4@22
D4N-9@22 *
1
47
40
(27)
1
45
1
17.5 dia. × 6.8
1
39.5
17.5 dia. × 6.8
resin roller
26R
resin roller
(31)
11
0.2
11
0.2
26R
Resin lever
Metal lever
20.5 × 20.5
20.5 × 20.5
27.5
27.5
18
18
0.2
9
0.2
9
21.5
21.5
2.5
2.5
0.1
0.1
20
22
0.1
20
22
0.2
47
0.2
0.1
47
55
2.15 0.05R
mounting holes
55
2.15 0.05R
mounting holes
Two, 4+00.15 dia. holes
Depth: 5
Two, 4+00.15 dia. holes
Depth: 5
0.2
14.2
22
0.2
14.2
30
22
Conduit cap
30
Conduit cap
31 max.
31 max.
Roller Lever (Metal Lever, Metal Roller)
Roller Lever (Metal Lever, Bearing Roller)
D4N-1@25
D4N-2@25
D4N-1@26
D4N-2@26
D4N-4@25
D4N-9@25 *
D4N-4@26
D4N-9@26 *
1
1
43.6
39
1
45
17.5 dia. × 7
sintered stainless
steel roller
17 dia. × 6
Bearing roller
26R
1
39.5
(31.5)
(31)
0.2
11
0.2
11
Metal lever
26R
Metal lever
20.5 × 20.5
20.5 × 20.5
27.5
18
27.5
0.2
9
18
0.2
9
21.5
2.5
0.1
0.1
20
22
21.5
2.5
0.1
20
0.2
47
55
2.15 0.05R
0.2
0.1
47
22
55
mounting holes
2.15 0.05R
mounting holes
Two, 4+00.15 dia. holes
Depth: 5
0.2
14.2
30
22
Two, 4+00.15 dia. holes
Depth: 5
Conduit cap
0.2
14.2
30
22
31 max.
Conduit cap
31 max.
Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
* Refer to page 12 for details on M12 connectors.
Slow-action (1NC/1NO) (2NC/1NO)
Snap-action (1NC/1NO) (2NC), Slow-action (2NC)
(3NC)
Model D4N-
@
@
@
@
A20 D4N-
C20 D4N-
E20 D4N-
F20 D4N-
@A22 D4N-
@C22 D4N-
@E22 D4N-
@F22 D4N-
@
@
@
@
A25 D4N-
C25 D4N-
E25 D4N-
F25 D4N-
@
@
@
@
A26
C26
E26
F26
D4N-
D4N-
D4N-
Model D4N-@120 D4N-@122 D4N-@125 D4N-@126
D4N-@220 D4N-@222 D4N-@225 D4N-@226
Operating characteristics
D4N-
D4N-
@
B20 D4N-
D20 D4N-
@
B22 D4N-
D22 D4N-
@
@
B25 D4N-
D25 D4N-
@
B26
D26
Operating force
Release force
OF max.
RF min.
PT (NC)
5.0 N
0.5 N
Operating characteristics
@
@
@
Operating force
Release force
Pretravel
OF max. 5.0 N
18° to 27°
(44°)
RF min.
PT
0.5 N
PT (NO)
*1
18° to 27°
40°
Overtravel
OT min.
PT (NC)
*2
27.5° to 36.5°
(18°)
Movement differential MD max. 14°
*1
PT (NO)
*1, *2
Operating position OP
Total travel TT *2
---
(80°)
Overtravel
OT min.
40°
---
Direct opening travel DOT min. 50°
*3
Operating position OP
Total travel
TT *1
(80°)
50°
Direct opening force DOFmin. 20 N
*3
DOT min.
*3
Direct opening travel
Note: Variation occurs in the simultaneity of contact opening/closing
operations of 2NC, 2NC/1NO, and 3NC contacts. Check contact
operation.
*1. Only for snap-action models.
*2. Reference value.
*3. For safe use, always make sure that the minimum values or greater
are provided.
DOF min.
*3
20 N
Direct opening force
*1. Reference values.
*2. Only for MBB models. (D4N-@E@@ or D4N-@F@@)
*3. For safe use, always make sure that the minimum values or greater
are provided.
9
D4N
1-conduit Models
Plunger
Roller Plunger
D4N-1@32
D4N-4@32
D4N-1@31
D4N-2@31
D4N-9@31 *
D4N-2@32
D4N-9@32 *
D4N-4@31
0.1
25
(31.5)
21.5
Two, 3 0.05 dia.
holes
(31.5)
21.5
20.5 × 20.5
9.5 dia. × 5
resin roller
0.2
11
12 dia.
0.2
11
6-dia. resin
plunger
OP
25.2
OP
0.2
9
0.2
9
2.5
2.5
0.1
20
0.1
0.1
20
22
0.2
0.1
47
22
0.2
47
55
55
2.15 0.05R
2.15 0.05R
mounting holes
mounting holes
0.2
14.2
Two, 4+00.15 dia. holes
Depth: 5
22
0.2
14.2
22
Conduit cap
30
Conduit cap
Two, 4+00.15 dia. holes
Depth: 5
30
31 max.
31 max.
One-way Roller Arm Lever
(Horizontal)
One-way Roller Arm Lever
(Vertical)
D4N-1@62
D4N-2@62
D4N-1@72
D4N-2@72
D4N-4@62
D4N-9@62 *
D4N-4@72
D4N-9@72 *
(31.5)
21.5
Operating direction
12 dia. × 5
resin roller
OP
12
(31.5)
21.5
0.2
11
0.2
11
14.8
0.2
11
0.2
11
12.5 dia. × 5
resin roller
19R
14.7
10.2
13.5
19.5
0.2
19.5
2.15 0.05R
20R
10.2
0.2
9
OP
23.3
0.2
2.5
0.2
9
0.1
0.1
20
22
mounting holes
0.2
47
2.5
55
0.1
0.1
20
22
Operating
direction
0.2
47
55
2.15 0.05R
mounting holes
Two, 4+00.15 dia. holes
Depth: 5
0.2
14.2
30
22
Conduit cap
31 max.
0.2
14.2
30
Two, 4+00.15 dia. holes
Depth: 5
22
Conduit cap
31 max.
Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
* Refer to page 12 for details on M12 connectors.
10
D4N
Snap-action (1NC/1NO) (2NC), Slow-action (2NC) (3NC)
Model D4N-@131
D4N-@231
D4N-@132
D4N-@232
D4N-@162
D4N-@262
D4N-@172
D4N-@272
D4N-@B72
D4N-@D72
D4N-@B31
D4N-@B32 D4N-@B62
D4N-@D32 D4N-@D62
Operating characteristics
D4N-@D31
Operating force
Release force
Pretravel
OF max.
6.5 N
1.5 N
2 mm
4 mm
6.5 N
1.5 N
2 mm
4 mm
1 mm
5.0 N
0.8 N
4 mm
5 mm
1.5 mm
5.0 N
0.8 N
4 mm
5 mm
1.5 mm
Note: Variation occurs in the simultaneity
of contact opening/closing
RF min.
PT max.
OT min.
operations of 2NC, 2NC/1NO, and
3NC contacts. Check contact
operation.
Overtravel
Movement differential MD max. *1
1 mm
18.2
*1. Only for snap-action models.
Operating position OP
±
0.5 mm 28.6
±
0.8 mm 37 ±0.8 mm 27 ±0.8 mm *2. Reference value.
*3. For safe use, always make sure that
the minimum values or greater are
provided.
Total travel
TT *2
(6 mm)
3.2 mm
20 N
(6 mm)
3.2 mm
20 N
(9 mm)
5.8 mm
20 N
(9 mm)
4.8 mm
20 N
Direct opening travel DOT min. *3
Direct opening force DOF min. *3
Slow-action (1NC/1NO) (2NC/1NO)
Model D4N-@A31
D4N-@A32 D4N-@A62
D4N-@C32 D4N-@C62
D4N-@A72
D4N-@C72
D4N-@E72
D4N-@F72
D4N-@C31
D4N-@E31
D4N-@F31
D4N-@E32
D4N-@F32
D4N-@E62
D4N-@F62
Operating characteristics
Operating force
Release force
Pretravel
OF max.
6.5 N
6.5 N
5.0 N
5.0 N
RF min.
1.5 N
1.5 N
0.8 N
0.8 N
PT max. (NC)
PT (NO) *1
PT max. (NC) *2 2.8 mm
PT (NO) *1, *2 (1 mm)
2 mm
2 mm
4 mm
4 mm
(2.9 mm)
(2.9 mm)
2.8 mm
(1 mm)
4 mm
(5.2 mm)
4 mm
(4.3 mm)
4 mm
(1.5 mm)
5 mm
(1.5 mm)
5 mm
Overtravel
OT min.
4 mm
*1. Reference values.
*2. Only for MBB models. (D4N-@E@@ or
D4N-@F@@)
*3. For safe use, always make sure that
the minimum values or greater are
provided.
Operating position OP
OP *2
TT *1
Direct opening travel DOT min. *3
Direct opening force DOF min. *3
18.2
17.4
±
±
0.5 mm 28.6
0.5 mm 28 ±0.8 mm 36 ±0.8 mm 26.1
±
0.8 mm 37 ±0.8 mm 27 ±0.8 mm
±
0.8 mm
Total travel
(6 mm)
3.2 mm
20 N
(6 mm)
3.2 mm
20 N
(9 mm)
5.8 mm
20 N
(9 mm)
4.8 mm
20 N
11
D4N
1-conduit Models
Adjustable Roller Lever, Form Lock
(with Metal Lever, Rubber Roller)
Adjustable Roller Lever, Form Lock
(with Metal Lever, Resin Roller)
D4N-1@2H
D4N-2@2H
D4N-1@2G
D4N-2@2G
1
48.2
41.3
(29.2)
1
45
D4N-4@2H
D4N-9@2H *
D4N-4@2G
D4N-9@2G *
1
50 dia. × 8
1
39.5
17.5 dia. × 6.8
resin roller
rubber roller
(31)
11
Bearing
0.2
20 to 66R
0.2
11
20.5 × 20.5
32 to 66R
20.5 × 20.5
27.5
27.5
18
0.2
9
18
21.5
0.2
2.5
9
21.5
0.2
47
2.5
55
2.15 0.05R
mounting holes
0.1
0.1
20
22
0.2
47
2.15 0.05R
mounting holes
55
0.1
0.1
20
22
Stainless steel
lever
0.2
14.2
22
Two, 4+00.15 dia. holes
Depth: 5
Conduit cap
30
31 max.
0.2
14.2
30
Two, 4+00.15 dia. holes
22
Conduit cap
31 max.
Depth: 5
Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
* Refer to following diagrams for details on M12 connectors.
Snap-action (1NC/1NO) (2NC), Slow-action (2NC) (3NC)
Model D4N-@12H
D4N-@22H
D4N-@12G
D4N-@22G
D4N-@B2G
D4N-@D2G
*1
D4N-@B2H
D4N-@D2H
Operating characteristics
Operating force
Release force
OF max.
RF min.
PT
4.5 N
Note: Variation occurs in the simultaneity of contact
opening/closing operations of 2NC, 2NC/1NO, and
3NC contacts. Check contact operation.
*1. The operating characteristics of these Switches were
measured with the roller lever set at 32 mm.
*2. Only for snap-action models.
*3. Reference value.
*4. For safe use, always make sure that the minimum values
or greater are provided.
0.4 N
Pretravel
18° to 27°
40°
Overtravel
OT min.
Movement differential
Operating position
Total travel
MD max. *2
OP
14°
---
TT *3
(80°)
50°
Direct opening travel
Direct opening force
DOT min. *4
DOF min. *4
20 N
Slow-action (1NC/1NO) (2NC/1NO)
Model D4N-@A2H
D4N-@A2G
D4N-@C2G
D4N-@E2G
D4N-@F2G
*1
D4N-@C2H
D4N-@E2H
D4N-@F2H
Operating characteristics
Operating force
Release force
OF max.
4.5 N
RF min.
0.4 N
Pretravel
PT (NC)
18° to 27°
(44°)
PT (NO) *2
PT (NC) *3
27.5° to 36.5°
PT (NO) *2, *3 (18°)
*1. The operating characteristics of these Switches were
measured with the roller lever set at 32 mm.
*2. Reference values.
*3. Only for MBB models. (D4N-@E@@ or D4N-@F@@)
*4. For safe use, always make sure that the minimum
values or greater are provided.
Overtravel
OT min.
OP
40°
Operating position
Total travel
---
TT *2
DOT min.
DOF min. *4
(80°)
50°
Direct opening travel
Direct opening force
20 N
1-conduit M12 Connector
D4N-9@@@
(14)
M12 × 1
14.2
30
12
D4N
1-conduit Models
Fork Lever Lock
(Right Operation) *2
D4N-2@RE
Fork Lever Lock
(Left Operation) *2
D4N-2@LE
D4N-4@RE
D4N-4@LE
47 max.
Two, 17.5 dia.
× 8 rubber
rollers
47 max.
1
39.3
Two, 17.5 dia. ×
8 rubber rollers
1
39.3
(27.2)
(27.2)
90°
0.2
11
90°
26R
0.2
11
26R
20.5 × 20.5
20.5 × 20.5
27.5
18
27.5
0.2
9
18
0.2
9
21.5
2.5
21.5
0.1
0.1
20
22
2.5
0.1
0.1
20
22
0.2
47
55
2.15 0.05R
0.2
47
55
2.15 0.05R
mounting
mounting holes
holes
Two, 4+00.15 dia. holes
Depth: 5
Conduit cap
0.2
14.2
22
0.2
30
14.2
30
22
Two, 4+00.15 dia. holes
Depth: 5
31 max.
Conduit cap
31 max.
Cat Whisker *2
D4N-2@80
D4N-4@80
Plastic Rod *2
D4N-2@87
D4N-4@87
PT
38
1.2-dia.
PT
stainless
steel wire
*1
Resin rod *1
20.5 ×
20.5
42
115
21.5
20.5 × 20.5
143.1
(50.1)
16.6 dia.
21.5
Sealing cap
0.2
11
16.6 dia.
0.2
0.2
Sealing cap
11
12
0.2
9
0.2
9
2.5
0.1
0.1
20
22
2.5
0.2
47
0.1
20
55
2.15 0.05R
mounting holes
0.2
0.1
47
22
55
2.15 0.05R
mounting holes
0.2
14.2
30
22
Conduit cap
31 max.
0.2
14.2
22
Two, 4+0.15 dia. holes
Depth: 5
(31.5)
0
Conduit cap
30
(31.5)
31 max.
Two, 4+0.15 dia. holes
0
Depth: 5
Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
*1. The usable range for stainless steel wires and resin rods is 35 mm max. from the end with a total travel of 70 mm max.
*2. In terms of construction, the Switch is a General-purpose Limit Switch rather than a Safety Limit Switch.
Slow-action (1NC/1NO) (2NC/1NO) (2NC) (3NC)
Note: Variation occurs in the simultaneity of contact opening/closing
operations of 2NC, 2NC/1NO, and 3NC contacts. Check
contact operation.
Model
D4N-@@RE
6.4 N
D4N-@@LE
6.4 N
Operating characteristics
Force necessary to reverse
the direction of the lever:
max.
Movement until the lever
reverses
55 ±10°
55 ±10°
Movement until switch
operation (NC)
(6.5°)
(MBB: 10°)
(6.5°)
(MBB: 10°)
Movement until switch
operation (NO)
(18.5°)
(MBB: 5°)
(18.5°)
(MBB: 5°)
Snap-action (1NC/1NO) (2NC), Slow-action (2NC) (3NC)
Model
D4N-@@80
D4N-@@87
1.5 N
15°
Operating characteristics
Operating force OF max. 1.5 N
Pretravel PT max. 15°
13
D4N
2-conduit Models
Roller Lever (Metal Lever, Resin Roller)
Roller Lever (Resin Lever, Resin Roller)
1
47
40
(27)
D4N-6@22
D4N-6@20
1
17.5 dia. × 6.8
resin roller
1
45
D4N-8@22
17.5 dia. × 6.8
resin roller
D4N-8@20
1
39.5
0.2
11
(31)
11
26R
Resin lever
0.2
26R
20.5 × 20.5
Metal lever
20.5 × 20.5
5.4
2.5
27.5
18
0.2
21.5
9
5.4
2.5
27.5
18
0.1
0.1
0.1
0.2
21.5
20
22
40
9
20.5
Cap
0.2
39
25 dia.
2.15 0.05R
mounting
holes
0.1
0.1
0.1
0.1
20
22
40
42
47
20.5
Cap
0.2
39
25 dia.
47
Conduit
2.15 0.05R
mounting
holes
cap
0.2
42
(3)
14.2
30
56 max.
0.2
Conduit cap
42
(3)
14.2
30
Two, 4+00.15 dia. holes
56 max.
Two, 4+0.15 dia. holes
Depth: 5
0
Depth: 5
Plunger
Roller Plunger
0.1
25
D4N-6@31
D4N-6@32
(31.5)
21.5
D4N-8@31
D4N-8@32
20.5 × 20.5
0.2
11
(31.5)
21.5
Two, 3 0.05
dia. holes
9.5 dia. × 5
resin roller
12 dia.
0.2
11
6-dia. resin plunger
OP
25.2
2.5
9
0.2
5.4
OP
2.5
5.4
0.1
0.1
0.1
0.1
20
22
40
42
0.2
9
20.5
Cap
0.2
39
25 dia.
2.15 0.05R
mounting
holes
0.1
0.1
0.1
0.1
20
22
40
42
47
20.5
Cap
0.2
39
2.15 0.05R
mounting
holes
25 dia.
47
Conduit cap
0.2
42
(3)
14.2
30
56 max.
Conduit cap
0.2
42
(3)
Two, 4+0.15 dia. holes
14.2
30
0
56 max.
Depth: 5
Two, 4+0.15 dia. holes
0
Depth: 5
Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
Snap-action (1NC/1NO) (2NC), Slow-action (2NC)
(3NC)
Slow-action (1NC/1NO) (2NC/1NO)
Model D4N-
@
@
@
@
A20 D4N-
C20 D4N-
E20 D4N-
F20 D4N-
@A22 D4N-
@C22 D4N-
@E22 D4N-
@F22 D4N-
@
@
@
@
A31 D4N-
C31 D4N-
E31 D4N-
F31 D4N-
@
@
@
@
A32
C32
E32
F32
D4N-
D4N-
Model D4N-
@
@
@
@
120 D4N-
220 D4N-
B20 D4N-
D20 D4N-
@
@
@
@
122 D4N-@131 D4N-
222 D4N-@231 D4N-
B22 D4N-@B31 D4N-
D22 D4N-@D31 D4N-
@
@
@
@
132
232
B32
D32
D4N-
Operating characteristics D4N-
D4N-
Operating force
Release force
Pretravel
OF max. 5 N
RF min. 0.5 N
5 N
6.5 N
1.5 N
6.5 N
1.5 N
2 mm
Operating characteristics
D4N-
OF max. 5 N
RF min. 0.5 N
PT
OT min. 40°
0.5 N
Operating force
Release force
Pretravel
5 N
6.5 N
1.5 N
6.5 N
PT (NC) 18° to 27° 18° to 27° 2 mm
0.5 N
1.5 N
2 mm
4 mm
PT (NO) (44°)
*1
(44°)
(2.9 mm) (2.9 mm)
18° to 27° 18° to 27° 2 mm
Overtravel
40°
4 mm
PT (NC) 27.5° to
27.5° to
36.5°
2.8 mm
(1 mm)
2.8 mm
(1 mm)
Movement differential
*2
36.5°
MDmax. 14°
*1
14°
1 mm
1 mm
28.2
PT (NO) (18°)
*1, *2
(18°)
18
±0.5 mm
Operating position OP
---
---
Overtravel
OT min. 40°
40°
4 mm
18
4 mm
28.2
±0.8 mm
Total travel
Direct opening travel
DOTmin. 50°
*3
Direct opening force
TT *2 (80°)
(80°)
(6 mm)
(6 mm)
Operating position OP
---
---
±0.5 mm ±0.8 mm
17.4 28
±0.5 mm ±0.8 mm
50°
3.2 mm
3.2 mm
20 N
OP *2
TT *1
Direct opening travel
---
---
Total travel
(80°)
(80°)
(6 mm)
(6 mm)
DOFmin. 20 N
*3
20 N
20 N
DOT min. 50°
*3
50°
3.2 mm
3.2 mm
Note: Variation occurs in the simultaneity of contact opening/closing
operations of 2NC, 2NC/1NO, and 3NC contacts. Check
contact operation.
*1. Only for snap-action models.
*2. Reference value.
*3. For safe use, always make sure that the minimum values or
greater are provided.
Direct opening force
DOF min. 20 N
*3
20 N
20 N
20 N
*1. Reference values.
*2. Only for MBB models. (D4N-@E@@ or D4N-@F@@)
*3. For safe use, always make sure that the minimum values or
greater are provided.
14
D4N
2-conduit Models
One-way Roller Arm Lever
(Vertical)
One-way Roller Arm Lever
Operating direction
(Horizontal)
D4N-6@62
D4N-8@62
(31.5)
21.5
14.8
D4N-6@72
(31.5)
21.5
0.2
11
12 dia. x 5
resin roller
D4N-8@72
0.2
11
OP
12
0.2
11
12 dia. × 5
resin roller
0.2
11
13.5
20R
10.2
21.5
20.5
OP
23.3
19.5
5.4
2.5
9
19R
2.5
14.7
0.2
10.2
21.5
0.2
5.4
0.2
19.5
0.1
20
22
40
42
0.2
9
2.15 0.05R
mounting holes
0.2
39
25 dia.
0.1
0.1
0.1
0.1
0.1
0.1
0.1
20
22
40
42
47
20.5
0.2
39
25 dia.
Cap
47
Conduit cap
2.15 0.05R
mounting
holes
Cap
0.2
42
(3)
14.2
30
Two, 4+00.15 dia. holes
56 max.
Operating
direction
0.2
42
(3)
Conduit cap
14.2
30
56 max.
Depth: 5
Two, 4+00.15 dia. holes
Depth: 5
Adjustable Roller Lever, Form Lock
(with Metal Lever, Rubber Roller)
1
48.2
Adjustable Roller Lever, Form Lock
(with Metal Lever, Resin Roller)
D4N-6@2G
1
41.3
(29.2)
1
45
1
39.5
D4N-6@2H
50 dia. × 8
rubber roller
17.5 dia. × 6.8
resin roller
(31)
Bearing
D4N-8@2H
D4N-8@2G
0.2
11
Resin lever
2.15 0.05R
20 to 66R
0.2
11
20.5 × 20.5
32 to 66R
Stainless
steel lever
mounting holes
2.15 0.05R
mounting holes
20.5 × 20.5
5.4
2.5
27.5
18
0.2
21.5
9
5.4
2.5
27.5
18
0.2 21.5
9
20.5
Cap
0.2
0.1
0.1
0.1
0.1
39
20
22
25 dia.
20.5
Cap
0.2
0.1
0.1
0.1
0.1
47
39
25 dia.
20
40
22
42
47
40
42
Conduit cap
0.2
42
(3)
Conduit cap
14.2
30
56 max.
0.2
42
(3)
14.2
30
Two, 4+00.15 dia. holes
Depth: 5
56 max.
Two, 4+00.15 dia. holes
Depth: 5
Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
v
Slow-action (1NC/1NO) (2NC/1NO)
Snap-action (1NC/1NO) (2NC), Slow-action (2NC)
(3NC)
Model D4N-
D4N-
@
@
@
A62 D4N-
C62 D4N-
E62 D4N-
@
@
@
A72 D4N-@A2G D4N-@A2H
C72 D4N-@C2G D4N-@C2H
E72 D4N-@E2G D4N-@E2H
Model D4N-@162 D4N-@172 D4N-@12G D4N-@12H
D4N-@262 D4N-@272 D4N-@22G D4N-@22H
D4N-
D4N-@F62 D4N-@F72 D4N-@F2G D4N-@F2H
D4N-
D4N-
@
B62 D4N-
D62 D4N-
@
B72 D4N-@B2G D4N-@B2H
D72 D4N-@D2G D4N-@D2H
Operating characteristics
*1
*2
@
@
Operating force
Release force
Pretravel
OF max. 5.0 N
5.0 N
0.8 N
4 mm
4.5 N
0.4 N
18° to 27°
4.5 N
0.4 N
18° to 27°
Operating characteristics
*1
*2
RF min. 0.8 N
Operating force
Release force
Pretravel
OF max. 5.0 N
RF min. 0.8 N
PT max. 4 mm
OT min. 5 mm
5.0 N
0.8 N
4 mm
5 mm
1.5 mm
4.5 N
0.4 N
18° to 27°
40°
4.5 N
0.4 N
18° to 27°
40°
PTmax. 4 mm
(NC)
PT (NO) (5.2 mm) (4.3 mm) (44°)
*3
(44°)
Overtravel
PT max.
(NC) *4
Movement differential
MD max. *3
1.5 mm
14°
14°
4 mm
4 mm
27.5° to 36.5° 27.5° to 36.5°
PT (NO) (1.5 mm) (1.5 mm) (18°)
*3, 4
(18°)
Operating position OP
37 0.8 mm 27
±
±
0.8 mm ---
---
Total travel
TT *4
(9 mm)
5.8 mm
(9 mm)
4.8 mm
(70°)
50°
(70°)
50°
Overtravel
OT min. 5 mm
5 mm
40°
40°
Direct opening travel
Operating position OP
37
±0.8 mm 27
±0.8 mm ---
---
DOT min. *5
Direct opening force
DOF min. *5
26.1
±0.8 mm
20 N
20 N
20 N
20 N
OP *4 36
±0.8 mm
---
---
Total travel
Direct opening travel
DOT min. *5
Direct opening force
DOF min. *5
TT *3
(9 mm)
5.8 mm
(9 mm)
4.8 mm
(70°)
50°
(70°)
50°
Note: Variation occurs in the simultaneity of contact opening/closing
operations of 2NC, 2NC/1NO, and 3NC contacts. Check contact
operation.
20 N
20 N
20 N
20 N
*1. The operating characteristics of these Switches were measured
with the roller lever set at 30 mm.
*2. The operating characteristics of these Switches were measured
with the roller lever set at 31 mm.
*3. Only for snap-action models.
*4. Reference value.
*1. The operating characteristics of these Switches were measured
with the roller lever set at 30 mm.
*2. The operating characteristics of these Switches were measured
with the roller lever set at 31 mm.
*3. Reference values.
*4. Only for MBB models. (D4N-@E@@ or D4N-@F@@)
*5. For safe use, always make sure that the minimum values or greater
are provided.
*5. For safe use, always make sure that the minimum values or greater
are provided.
15
D4N
Levers
Refer to the following for the angles and positions of the watchdogs (source: EN50047.)
Roller Lever
(D4N-@@20)
Adjustable Roller Lever, Form Lock
(with Metal Lever, Resin Roller)
(D4N-@@2G) (Reference Values)
Adjustable Roller Lever, Form Lock
(with Metal Lever, Rubber Roller)
(D4N-@@2H) (Reference Values)
7
30
2
40
10 min.
30°
2
40
7
29
2
42
Dog
10 min.
3
3
11
15
45 min.
10 min.
Dog
30°
Dog
40 min.
20 min.
2
30°
25 min.
5
110
55
5 min.
90
70+1
55+1
15 min.
55+1
30°
0
75
40+1
0
0
0
35+1
45
0
50 max.
65R 31R
65R 20R
Roller Plunger
(D4N-@@32)
Sealed Plunger
(D4N-@@31)
0
12.5−2.5
10 1.5
0
12.5−2.5
Dog
20 min.
Dog
Operating position
25 min.
2.5
Operating position
30°
Dog
35
31 min.
25+1
0.5 21 min.
18
15 min.
10 min.
1
28
0
One-way Roller Arm Lever
(Vertical) (Reference Values)
(D4N-@@72)
One-way Roller Arm Lever
(Horizontal)
(D4N-@@62)
0
12.5−2.5
0
12.5 −2.5
2
10
Dog
10 min.
5 min.
31
5 min.
Dog
30°
20 min. 30°
40
31+1
0
2
41
30 max.
10 min.
22+1 20 min.
0
Fork Lever Lock
(Right Operation)
(D4N-@@RE)
40
Fork Lever Lock
(Left Operation)
(D4N-@@LE)
40
55° to 60°
Mounting
surface
Mounting
surface
55° to 60°
60
60
36
36
28
28
5 to 9R
5 to 9R
Dog setting range
Dog setting range
Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
16
D4N
Safety Precautions
● Be sure to read the precautions for all D4N models in the website at: http://www.ia.omron.com/.
Switch Mounting
• Mount the Switch using M4 screws and spring washers and tighten
the screws to the specified torque.
!CAUTION
Electric shock may occasionally occur.
Do not use metal connectors or metal conduits.
• For safety, use screws that cannot be easily removed, or use an
equivalent measure to ensure that the Switch is secure.
• As shown below, two studs with a maximum height of 4.8 mm and
−0.05
−0.15
a diameter of 4
mm can be provided, the studs inserted into the
Precautions for Safe Use
holes on the bottom of the Switch, and the Switch secured at four
locations to increase the mounting strength.
• Do not use the Switch submerged in oil or water, or in locations
continuously subject to splashes of oil or water. Doing so may
result in oil or water entering the Switch interior. (The IP67 degree
of protection specification for the Switch refers to water penetration
while the Switch is submersed in water for a specified period of
time.)
• Always attach the cover after completing wiring and before using
the Switch. Also, do not turn ON the Switch with the cover open.
Doing so may result in electric shock.
Switch Mounting Holes
One-conduit Type
Two-conduit Type
0.1
Two, M4
2.5
47
Two, M4
0.1
2.5
0.1
5.35
0.1
20
0.1
0.1
0.1
0.1
20
22
40
42
0.1
22
0.1
39
0.1
• Do not switch circuits for two or more standard loads (250 VAC,
3 A). Doing so may adversely affect insulation performance.
Precautions for Correct Use
0.1
42
−0.05
dia.
−0.15
Height: 4.8 max.
0.1
22
−0.05
−0.15
4
The Switch contacts can be used with either standard loads or
microloads. Once the contacts have been used to switch a load,
however, they cannot be used to switch smaller loads. The contact
surfaces will become rough once they have been used and contact
reliability for smaller loads may be reduced.
4
dia.
Height: 4.8 max.
• Make sure that the dog contacts the actuator at a right angle.
Applying a load to the switch actuator (roller) on a slant may result
in deformation or damage of the actuator or rotary shaft.
Mounting Method
Dog
Appropriate Tightening Torque
Tighten each of the screws to the specified torque. Loose screws may
result in malfunction of the Switch within a short time.
Incorrect
Correct
1
2
3
4
5
6
7
Terminal screw
0.6 to 0.8 N·m
0.5 to 0.7 N·m
0.5 to 0.6 N·m
1.6 to 1.8 N·m
0.5 to 0.7 N·m
Cover mounting screw
Head mounting screw
Lever mounting screw
Body mounting screw
Connector, M12 adaptor 1.8 to 2.2 N·m
Cap screw
1.3 to 1.7 N·m
3
4
5
1
7
6
2
17
D4N
Wiring
Wiring
Contact Arrangement
• When connecting to the terminals via insulating tube and M3.5
crimp terminals, arrange the crimp terminals as shown below so
that they do not rise up onto the case or the cover.
Applicable lead wire size: AWG20 to AWG18 (0.5 to 0.75 mm2).
Use lead wires of an appropriate length, as shown below. Not
doing so may result in excess length causing the cover to rise and
not fit properly.
• The contact arrangements are shown below.
Screw Terminal Type
D4N-@C@@ (2NC/1NO)
D4N-@F@@ (2NC/1NO (MBB))
D4N-@D@@ (3NC)
11
21
31
12
22
32
11
21
33
12
22
34
One-conduit Type (3 Poles)
A B
A
C
E
B
D
F
C
D
D4N-@B@@ (2NC)
D4N-@A@@ (1NC/1NO)
11 12
E
F
D4N-@2@@ (2NC (SNAP))
D4N-@E@@ (1NC/1NO (MBB))
21 22
33 34
42 mm
33 mm
28 mm
11
31
12
32
11
33
12
34
Tolerance 2 mm
D4N-@1@@ (1NC/1NO (SNAP))
Two-conduit Type (3 Poles)
13
14
Left hand
Right hand
E C A
B D F
31
32
A
C
E
B
D
F
11 12
B D
F
E C A
Connector Type
21 22
33 34
42 mm
42 mm
D4N-9B@@ (2NC)
D4N-92@@ (2NC (SNAP))
D4N-9A@@ (1NC/1NO)
D4N-9E@@ (1NC/1NO (MBB))
28 mm
28 mm
(1) 11
(3) 31
12 (2)
32 (4)
(1) 11
(3) 33
12 (2)
34 (4)
Tolerance 2 mm
Tolerance 2 mm
• Do not push crimp terminals into gaps in the case interior. Doing so
may cause damage or deformation of the case.
• Use crimp terminals not more than 0.5 mm in thickness. Otherwise,
they will interfere with other components inside the case.
D4N-91@@ (1NC/1NO (SNAP))
1
3
(3) 13
14 (4)
2
4
[Reference] The crimp terminals shown below are not more than
(1) 31
32 (2)
0.5 mm thick.
Pin No. (Terminal No.)
Manufacturer
Type
• Applicable socket: XS2F-D421 series (OMRON).
• Refer to the Connector Catalog for details on socket pin numbers
and lead wire colors.
FN0.5-3.7 (F Type)
N0.5-3.7 (Straight Type)
J.S.T. Mfg. Co.
L
Socket Tightening (Connector Type)
• Turn the socket connector screws by hand and tighten until no
space remains between the socket and the plug.
l
F
t: 0.5 mm
dz dia.: 3.7 mm
D dia.: 2.9 mm
B: 6.6 mm
• Make sure that the socket connector is tightened securely.
Otherwise, the rated degree of protection (IP67) may not be
maintained and vibration may loosen the socket connector.
B
D dia.
L: 19 mm
F: 7.7 mm
I: 8.0 mm
dz dia.
Terminal screw
Conduit Opening
Crimp terminal
• Connect a recommended connector to the opening of the conduit
and tighten the connector to the specified torque. The case may be
damaged if an excessive tightening torque is applied.
• Use a cable with a suitable diameter for the connector.
• Attach and tighten a conduit cap to the unused conduit opening
when wiring. Tighten the conduit cap to the specified torque. The
conduit cap is provided with the Switch (2-conduit types).
Correct
Incorrect
Changing the Lever
The lever mounting screws can be used to set the lever position to
any position in a 360° angle at 7.5° increments. Grooves are incised
on the lever and rotary shaft that engage to prevent the lever from
slipping against the rotary shaft. The screws on adjustable roller lever
models can also loosened to change the length of the lever.
Remove the screws from the front of the lever before mounting the
lever in reverse (front/back), and set the level so that operation will be
completed before exceeding a range of 180° on the horizontal.
18
D4N
Recommended Connectors
Use connectors with screws not exceeding 9 mm, otherwise the
screws will protrude into the case interior, interfering with other
components in the case.
The connectors listed in the following table have connectors with
thread sections not exceeding 9 mm.
Use the recommended connectors to ensure conformance to IP67.
Applicable cable
Size
G1/2
Manufacturer
LAPP
Model
diameter
ST-PF1/2
5380-1002
6.0 to 12.0 mm
ST-13.5
5301-5030
Pg13.5
M20
LAPP
6.0 to 12.0 mm
7.0 to 13.0 mm
ST-M20 × 1.5
5311-1020
LAPP
Use LAPP connectors together with seal packing (JPK-16, GP-13.5,
or GPM20), and tighten to the specified tightening torque. Seal
packing is sold separately.
• LAPP is a German manufacturer.
Others
• When attaching a cover, be sure that the seal rubber is in place and
that there is no foreign material present. If the cover is attached
with the seal rubber out of place or if foreign material is stuck to the
rubber, a proper seal will not be obtained.
• Do not use any screws to connect the cover other than the
specified ones. The seal characteristics may be reduced.
• Make sure that foreign particles do not enter the head when
removing the screws from the four corners to change the head
position in any of the four directions.
• Use the following recommended countermeasures to prevent
telegraphing when using adjustable or long levers.
1. Make the rear edge of the dog smooth with an angle of 15° to
30° or make it in the shape of a quadratic curve.
2. Design the circuit so that no error signal will be generated.
19
Read and Understand This Catalog
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or
comments.
Warranty and Limitations of Liability
WARRANTY
OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified)
from date of sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR
FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS
DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS
IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT
LIABILITY.
In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS
OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT
SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
Application Considerations
SUITABILITY FOR USE
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's
application or use of the products.
At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the
products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,
machine, system, or other application or use.
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible
uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:
Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.
Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,
safety equipment, and installations subject to separate industry or government regulations.
Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE
SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND
INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
Disclaimers
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons.
It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.
However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or
establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual
specifications of purchased products.
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.
PERFORMANCE DATA
Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the
result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON
Warranty and Limitations of Liability.
ERRORS AND OMISSIONS
The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,
typographical, or proofreading errors, or omissions.
2012.4
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2012 All Right Reserved.
相关型号:
D4N-1A62
Snap Acting/Limit Switch, DPST, Momentary, 2.5A, 250VDC, 9mm, Screw Terminal, One-way Roller Lever Actuator, Panel Mount
OMRON
D4N-1A72
Snap Acting/Limit Switch, DPST, Momentary, 2.5A, 250VDC, 9mm, Screw Terminal, One-way Roller Lever Actuator, Panel Mount
OMRON
D4N-1B20
Upgraded Safety Limit Switches Based on the Popular D4D, Providing a Full Lineup Conforming to International Standards
OMRON
D4N-1B22
Upgraded Safety Limit Switches Based on the Popular D4D, Providing a Full Lineup Conforming to International Standards
OMRON
D4N-1B25
Upgraded Safety Limit Switches Based on the Popular D4D, Providing a Full Lineup Conforming to International Standards
OMRON
D4N-1B26
Upgraded Safety Limit Switches Based on the Popular D4D, Providing a Full Lineup Conforming to International Standards
OMRON
D4N-1B2G
Upgraded Safety Limit Switches Based on the Popular D4D, Providing a Full Lineup Conforming to International Standards
OMRON
©2020 ICPDF网 联系我们和版权申明