D5F-2B10 [OMRON]

High-Precision Optical Switch; 高精度光学开关
D5F-2B10
型号: D5F-2B10
厂家: OMRON ELECTRONICS LLC    OMRON ELECTRONICS LLC
描述:

High-Precision Optical Switch
高精度光学开关

开关
文件: 总6页 (文件大小:55K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
R
High-Precision Optical Switch  
D5F  
Opto-Mechanical Switch Achieves  
1-µm Operating Position  
Repeatability  
H 4-way switch  
H A knife-edge mechanism in the optical  
system provides greater precision for a  
more stable output  
H Reduced size and weight are 34 mm  
(1.34 in) at operating section and 60 g  
(2.12 oz) total  
H Actuators have wear-resistant ceramic  
parts  
H PNP and NPN output types available  
Ordering Information  
J LIMIT SWITCHES  
Output configuration  
PNP open collector  
(+ common)  
Contact form  
SPST-NC  
Output indicator  
Cable length  
1 m  
Part number  
D5F-2B10  
D5F-2B30  
D5F-3C10  
D5F-3C30  
ON when no target  
present  
3 m  
NPN open collector  
(– common)  
SPST-NO  
ON when target present  
1 m  
3 m  
D5F  
D5F  
Construction  
LED indicator  
Photodiode  
(for signal)  
O ring  
Seal cap  
Ceramic chip  
Ball lens  
Photodiode (for  
monitoring)  
O-ring  
Half mirror  
Seal rubber  
LED light source  
Specifications  
J RATINGS  
Power supply voltage  
Output current  
12/24 VDC±10%  
100 mA max.  
30 mA max.  
0.15 mA max.  
2 V max.  
Power consumption  
Leakage current  
Residual voltage  
2
D5F  
D5F  
J CHARACTERISTICS  
–6  
Operating speed  
1 µm/s to 50 cm/s (39 x 10 in to 19.68 in/s)  
Max. operating frequency  
Insulation resistance  
Dielectric strength  
Repeat accuracy  
60 operations/minute  
100 Mmin. (at 500 VDC) between each terminal and ground  
1,100 VAC between each terminal and ground  
–6  
1 µm max. (39 x 10 in)  
Vibration resistance  
Shock resistance  
Life expectancy  
Malfunction  
10 to 500 Hz, 0.65-mm double amplitude  
2
2
Malfunction  
Mechanical  
Electrical  
300 m/s min. (approx. 30G min.) 984 ft/s  
5,000,000 operations min.  
5,000,000 operations min.  
–6  
Deflection  
10 µm max. after 1,000,000 operations (390 x 10 in)  
–6  
Temperature coefficient  
Ambient temperature  
Ambient humidity  
Enclosure rating  
±50 x 10 /°C max.  
Operating  
Operating  
–10°C to 60°C (14°F to 140°F) with no icing  
30% to 95%  
IEC IP67  
J OPERATING CHARACTERISTICS  
OF max.  
RF min.  
PT max.  
MD max.  
TT min.  
2.5 N (250 gf) (0.56 lbf)  
1.0 N (100 gf) (0.22 lbf)  
0.5 mm (0.22 in)  
–3  
20 µm (0.79 x 10 in)  
2.2 mm (0.087 in)  
Engineering Data  
J PERMISSIBLE OPERATING TEMPERATURE RANGE  
The permissible operating temperature range varies with the current flow as follows:  
100  
Operating range  
50  
40  
20  
40 45  
60  
Operating temperature (°C)  
3
D5F  
D5F  
Operation  
J OUTPUT CIRCUIT  
D5F-2Bj0  
12 to 24 VDC  
Output  
Brown  
Black  
Blue  
100 mA max.  
0 V  
Indicator (red LED)  
Actuator:  
ON (press)  
OFF  
Output transistor (load):  
ON  
OFF  
Indicator (LED):  
Lit  
Not lit  
D5F-3Cj0  
12 to 24 VDC  
Brown  
100 mA max.  
Output  
Black  
Blue  
0 V  
Indicator (red LED)  
Actuator:  
ON (press)  
OFF  
Output transistor (load):  
ON  
OFF  
Indicator (LED):  
Lit  
Not lit  
4
D5F  
D5F  
Dimensions  
Unit: mm (inch)  
J LIMIT SWITCHES  
D5F-2Bj0  
D5F-3Cj0  
34  
(1.34)  
44.5  
(1.75)  
15  
(0.59)  
16.5  
(0.65)  
Four, 4.5 dia.  
mounting  
holes  
30  
(1.18)  
Red LED  
operation  
indicator  
19.5  
7
(0.27)  
5
Ceramic chip  
(measuring  
part)  
(0.77)  
18 dia (0.71)  
16 dia. (0.63)  
2 (0.79)  
(0.19)  
1.8  
(0.71)  
23±0.1  
(0.91±0.004)  
34  
(1.34)  
14  
(0.55)  
24 dia.  
(0.94)  
30  
(1.18)  
16-head nut  
*1000 (3000)  
23±0.1  
(0.91±0.004)  
30  
(1.18)  
Note: The degree of parallelism and squareness of the ceramic chip are  
±5 µm/5 mm against the reference plane.  
Precautions  
J CONNECTING  
J OPERATING  
Take the residual voltage (2 V max.) into consideration when  
connecting a load or power supply.  
Do not press the plungers located opposite each other at the  
same time, or the switch could be damaged.  
When the internal circuit of the switch is open, there is a current  
leakage of 0.15 mA max. and a residual voltage on the load.  
Check the release voltage of the load before use.  
J NOISE  
Excessive external noise through the power line can affect the  
operating accuracy of the switch (refer to the table below). If  
required, use the correct noise filter to increase accuracy.  
Level  
Influence on accuracy  
–3  
1 kV p-p  
1.5 kV p-p  
3 µm max. (0.118 x 10 in)  
–3  
5 µm max. (0.196 x 10 in)  
5
D5F  
D5F  
NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4.  
R
OMRON ELECTRONICS, INC.  
One East Commerce Drive  
Schaumburg, IL 60173  
OMRON CANADA, INC.  
885 Milner Avenue  
Scarborough, Ontario M1B 5V8  
1-800-55-OMRON  
416-286-6465  
Cat. No. CEDSAX3  
10/99  
Specifications subject to change without notice.  
Printed in U.S.A.  

相关型号:

D5F-2B30

High-Precision Optical Switch
OMRON

D5F-2B34C-Y

High-Precision Optical Switch
OMRON

D5F-3C10

High-Precision Optical Switch
OMRON

D5F-3C30

High-Precision Optical Switch
OMRON

D5FB10

SEMICONDUCTOR
SHINDENGEN

D5FB20

SEMICONDUCTOR
SHINDENGEN

D5FB40

SEMICONDUCTOR
SHINDENGEN

D5FB60

SEMICONDUCTOR
SHINDENGEN

D5FBAU

Audio/RCA Connector, 5 Pole(s), Printed Wiring Pin and Solid Lead Terminal, Receptacle,
SWITCH

D5FBX

CONN PLUG FMALE XLR 5POS SOLDER
ETC

D5FBXAU

Circular Connector,
SWITCH

D5FBXS

Circular Connector,
SWITCH