D6F-W10A1 [OMRON]
MEMS Air Velocity Sensor; MEMS风速传感器
| 型号： | D6F-W10A1 |
| 厂家： | 
OMRON ELECTRONICS LLC |
| 描述： | MEMS Air Velocity Sensor |
| 文件： | 总4页 (文件大小：420K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MEMS Air Velocity Sensor
D6F-W
MEMS precision technology for
repeatable airflow velocity detection.
• Precision uni-directional air velocity detection with ±5%
full-scale repeatable accuracy.
• Integral passive Dust Segregation System (DSS) prevents
contamination of sensor element.
• Compact size: 39 (L) x 20 (W) x 9 (H) mm
• Output signal amplified & temperature compensated.
• User friendly - no adjustment necessary.
• RoHS Compliant
Ordering Information
Description
Case
Applicable Gas
Flow Range
0-1 m/sec
0-4 m/sec
0-10 m/sec
- - -
Model
D6F-W01A1
Velocity Sensor
PPS
Air (See note 1.)
D6F-W04A1
D6F-W10A1
D6F-W CABLE
Cable Connector Assembly
- - -
- - -
Note: 1. Dry gas must not contain large particles, eg dust, oil, mist.
2. Cable Assembly is sold separately.
Specifications
■ Characteristics
Models
Flow Range (See note 1.)
Applicable Gas (See note 2.)
Electrical Connection
Power Supply
D6F-W01A1
D6F-W04A1
D6F-W10A1
0 to 10 m/s
0 to 1 m/s
Air
0 to 4 m/s
Connector (3 wire)
10.8 to 26.4 VDC
Current Consumption
Operating Output Voltage (VDC)
Output Voltage (Max.)
Output Voltage (Min.)
Accuracy
Max. 15 mA (no load, Vcc = 12 to 24VDC, 25°C)
1 to 5 VDC
5.7 VDC (Lead resistance 10kΩ)
0 VDC (Lead resistance 10kΩ)
± 5% F.S. max. of detected characteristics at 25 °C
± 0.4% F.S.
Repeatability (See note 3.)
Case Material
PPS
Degree of Protection
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
IP40
-10 to 60°C (with no icing or condensation)
35 to 85% RH (with no icing or condensation)
-40 to 80°C (with no icing or condensation)
35 to 85% RH (with no icing or condensation)
Temperature Characteristics
Insulation Resistance
Dielectric Strength
± 5% F.S. max. of detected characteristics at 25 °C (within -10 to 60°C)
20 MΩ (500 VDC between lead terminal and the case)
500 VAC, 50/60 Hz for 1 minute. (Leakage current typ. Max. 1 mA) between lead terminals and case.
6.3 g
Weight
Note: 1. Flow range at 0°C, 101.3kPa.
2. Dry gas. (must not contain large particles, dust, oil, mist)
3. Reference (typical)
MEMS Air Velocity Sensor D6F-W
31
■ Absolute Maximum Rating
Item
Power supply voltage
Output voltage
Symbol
Rating
26.4
Unit
VDC
VDC
Vcc
Vout
6.0
■ Output Voltage Characteristics
D6F-W01A1
D6F-W04A1
D6F-W10A1
6.0
5.0
4.0
3.0
2.0
1.0
0.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
0
2
4
6
8
10
0.00
1.00
2.00
3.00
4.00
0.00
0.25
0.50
0.75
1.00
Flow Velocity (m/s)
Flow Velocity (m/s)
Flow Velocity (m/s)
D6F-W01A1
Flow Velocity (m/s)
0.00
0.25
0.50
0.75
1.00
Output Voltage (VDC)
1.00±0.2
1.35±0.2
2.01±0.2
3.27±0.2
5.00±0.2
D6F-W04A1
Flow Velocity (m/s)
0
1
2
3
4
Output Voltage (VDC)
1.00±0.2
1.58±0.2
2.88±0.2
4.11±0.2
5.00±0.2
Note: 1. Air velocity. D6F-W is optimally adjusted for air velocity de-
tection, derived from mass air-flow measurement according
to our in-house test method using a wind tunnel φ 48 mm as
shown in Fig. 1.
Fig. 1.
Flow rate measurement positoin
Air Velocity Sensor
48 dia.
20.8
2. Measurement condition: Power supply voltage 12±0.1 VDC,
ambient temperature 25±5°C. and dry air.
60
D6F-W10A1
Flow Velocity (m/s)
0
2
4
6
8
10
Output Voltage (VDC)
1.00±0.24
1.94±0.24
3.23±0.24
4.25±0.24
4.73±0.24
5.00±0.24
Note: 1. Air velocity. D6F-W is optimally adjusted for air velocity de-
tection, derived from mass air-flow measurement according
to our in-house test method using a wind tunnel φ 155 mm
as shown in Fig. 2.
Honeycomb air flow laminater
Air Velocity Sensor
Fig. 2.
2. Measurement condition: Power supply voltage 12±0.1 VDC,
ambient temperature 25±5 °C. and dry air.
155 dia.
18
Flow rate measurement positoin
10
100
Connections
The connector linked to this product should use the following JST
Mfg.Co.,Ltd. housing, contacts and electrical wire
2. Vout.
3. GND.
1. Vcc.
1) Contact: SZH-002T-P0.5
Wire: AWG#28 to #26
OR
Connections
2) Contact: SZH-003T-P0.5
Wire: AWG#32 to #28
Enlarged view
Pin No.
1: Vcc
2: Vout
3: GND
Housing:
Connector S3B-ZR-SM2-TF
ZHR-3
(Made by JST Mfg. Co.,Ltd.)
32
MEMS Air Velocity Sensor D6F-W
Dimensions
Note: All units are in millimeters unless otherwise indicated.
D6F-W01A1
D6F-W04A1
D6F-W10A1
9
0.2
3.2
20
2.6
1.2
1.2
2.6
8
Two, M3 screws
R: 4
Two, R: 1.6
8
39 24
7
0.2
4.2
IN
OUT
MADE IN JAPAN
0.05
30.5
5
5
0.2
30.5
19.5
OUT
2-dia. holes,
Depth: 2.5
dia.
R: 4
4
0.2
3.2
D6F-W CABLE
(Sold separately)
5
1
3. GND
Blue wire
Black wire
Brown wire
2. Vout
1. Vcc
15
3
30 10
50 10
100 10
Packaging
TYPE D6F-W
No.
1
Item
Sock liner
Material
CCNB
1
3
2
Tray (25pcs)
Polyethylene
CCNB
3
Box (100 pcs)
2
Display seal
Application Example
Clogged Filter Detection
The D6F-W air flow sensor detects the decrease in air velocity through the filter as it becomes more contaminated with particles. The moment the
velocity drops below a certain threshold, a warning signal is sent out, indicating the need for filter replacement.
Note: Be sure to read the precautions and information common to all D6F sensors, contained in the Technical User’s Guide, “D6F Technical Information”
for correct use.
MEMS Air Velocity Sensor D6F-W
33
All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which
can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.components.omron.com
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
847-882-2288
10/10
Specifications subject to change without notice
Printed in USA
Cat. No. X305-E-1
MEMS Air Velocity Sensor D6F-W
©2020 ICPDF网 联系我们和版权申明