E2E-X1C1-M5 [OMRON]
Cylindrical Proximity Sensor;型号: | E2E-X1C1-M5 |
厂家: | OMRON ELECTRONICS LLC |
描述: | Cylindrical Proximity Sensor |
文件: | 总48页 (文件大小:1189K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Cylindrical Proximity Sensor
E2E/E2E2
A New Series of Easy-to-use
and Tough E2E/E2E2 Models
Long-size E2E2 Proximity Sen-
sor Conforms to CENELEC
• Ideal for a variety of applications.
• With a metal connector that can be tightened
securely and a cable protector.
• With an easy-to-see indicator, deeper mounting
holes, and tightening flats for wrenches.
• New 3-dia. size (sensing distance: 0.6 mm) added to
the lineup.
<READ AND UNDERSTAND THIS CATALOG>
Please read and understand this catalog before purchasing
the products. Please consult your OMRON representative if
you have any questions or comments.
Ordering Information
E2E
DC 2-wire/Pre-wired Models
Self-diagnostic
output function
Size
Sensing distance
Model
---
NO
NC
Yes
Shielded
M12
M18
M30
3 mm
7 mm
10 mm
E2E-X3D1S (See note 1.)
E2E-X7D1S (See note 1.)
E2E-X10D1S (See note 1.)
---
---
Unshielded
Shielded
M12
M18
M30
8 mm
E2E-X8MD1S (See note 1.)
E2E-X14MD1S (See note 1.)
E2E-X20MD1S (See note 1.)
---
---
---
14 mm
20 mm
No
M8
2 mm
3 mm
7 mm
10 mm
4 mm
8 mm
14 mm
20 mm
E2E-X2D1-N (See notes 2 and 3.)
E2E-X2D2-N (See note 3.)
M12
M18
M30
M8
E2E-X3D1-N (See notes 1, 2 and 3.) E2E-X3D2-N (See note 3.)
E2E-X7D1-N (See notes 1, 2 and 3.) E2E-X7D2-N (See note 3.)
E2E-X10D1-N (See notes 1, 2 and 3.) E2E-X10D2-N
Unshielded
E2E-X4MD1 (See notes 2 and 3.)
E2E-X8MD1 (See notes 1, 2 and 3.)
E2E-X4MD2
E2E-X8MD2
M12
M18
M30
E2E-X14MD1 (See notes 1, 2 and 3.) E2E-X14MD2
E2E-X20MD1 (See notes 1, 2 and 3. E2E-X20MD2
Note 1. In addition to the above models, E2E-X@@15 models (e.g., E2E-X3D15-N), which are different in frequency from the above models, are
available.
2. E2E models with a robotics cable are available as well. The model number of a model with a robotics cable has the suffix “-R”
(e.g., E2E-X3D1-R).
3. Cables with a length of 5 m are also available. Specify the cable length at the end of the model number (e.g., E2E-X3D1-N 5M).
E2E/E2E2 Cylindrical Proximity Sensor
1
DC 2-wire/Connector Models
Connector
Self-diagnostic
output function
Size
Sensing
distance
Model
---
NO
E2E-X3D1S-M1
NC
M12
Yes
Shielded
M12
M18
M30
3 mm
7 mm
E2E-X7D1S-M1
E2E-X10D1S-M1
---
---
10 mm
Unshielded
Shielded
M12
M18
M30
8 mm
E2E-X8MD1S-M1
E2E-X14MD1S-M1
E2E-X20MD1S-M1
---
---
---
14 mm
20 mm
No
M8
2 mm
3 mm
7 mm
10 mm
4 mm
8 mm
14 mm
20 mm
2 mm
E2E-X2D1-M1G
E2E-X2D2-M1G
E2E-X3D2-M1G
E2E-X7D2-M1G
E2E-X10D2-M1G
E2E-X4MD2-M1G
E2E-X8MD2-M1G
E2E-X14MD2-M1G
E2E-X20MD2-M1G
E2E-X2D2-M3G
M12
M18
M30
M8
E2E-X3D1-M1G (See note.)
E2E-X7D1-M1G (See note.)
E2E-X10D1-M1G (See note.)
E2E-X4MD1-M1G
Unshielded
M12
M18
M30
M8
E2E-X8MD1-M1G (See note.)
E2E-X14MD1-M1G (See note.)
E2E-X20MD1-M1G (See note.)
E2E-X2D1-M3G
M8
Shielded
Unshielded
4 mm
E2E-X4MD1-M3G
E2E-X4MD2-M3G
Note: In addition to the above models, E2E-X@D15-M1G models (e.g., E2E-X3D15-M1G), which are different in frequency from the above models,
are available.
DC 2-wire/Pre-wired Connector Models
Size
Sensing distance
3 mm
Operation mode
Polarity
Model
E2E-X3D1-M1GJ
E2E-X3D1-M1J-T
E2E-X7D1-M1GJ
E2E-X7D1-M1J-T
E2E-X10D1-M1GJ
E2E-X10D1-M1J-T
E2E-X8MD1-M1GJ
E2E-X14MD1-M1GJ
E2E-X20MD1-M1GJ
Shielded
M12
M18
M30
NO
Yes
No
7 mm
Yes
No
10 mm
Yes
No
Unshielded
M12
M18
M30
8 mm
Yes
14 mm
20 mm
Note 1. A model with no polarity has a residual voltage of 5 V, which must be taken into consideration together with the interface condition (the
PLC’s ON voltage, for example) when connecting the Proximity Sensor to a load.
2. The standard cable length is 300 mm. Models are also available with 500 mm and 1 m cables.
Connector Pin Assignments of DC 2-wire Model
The connector pin assignments of each new E2E DC 2-wire conforms to IEC947-5-2 Table III.
The following E2E models with conventional connector pin assignments are available as well.
Size
Operation mode
NO
Model
E2E-X2D1-M1
E2E-X2D2-M1
E2E-X3D1-M1
E2E-X3D2-M1
E2E-X7D1-M1
E2E-X7D2-M1
E2E-X10D1-M1
E2E-X10D2-M1
Size
Unshielded
Operation mode
NO
Model
Shielded
M8
M8
E2E-X4MD1-M1
E2E-X4MD2-M1
E2E-X8MD1-M1
E2E-X8MD2-M1
E2E-X14MD1-M1
E2E-X14MD2-M1
E2E-X20MD1-M1
E2E-X20MD2-M1
NC
NO
NC
NO
NC
NO
NC
NC
NO
NC
NO
NC
NO
NC
M12
M18
M30
M12
M18
M30
2
E2E/E2E2 Cylindrical Proximity Sensor
DC 3-wire/Pre-wired Models
Size
Sensing
Output
Model
E2E-X2ME1
(See note 2.)
E2E-X2ME2
E2E-X2MF1
E2E-X2MF2
distance configuration
Size
Sensing
Output
Model
E2E-CR6C1
Un-
shielded
M8
2 mm
NPN NO
distance configuration
Shielded 3 dia. 0.6 mm NPN NO
NPN NC
PNP NO
PNP NC
NPN NO
E2E-CR6C2
E2E-CR6B1
E2E-CR6B2
NPN NC
PNP NO
PNP NC
E2E-X5ME1 (See notes
1, 2, 3, and 4.)
M12 5 mm
M18 10 mm
M30 18 mm
E2E-CR8C1
(See notes 1 and 2.)
4 dia. 0.8 mm NPN NO
E2E-X5ME2 (See notes
3 and 4.)
NPN NC
E2E-CR8C2
E2E-CR8B1
E2E-CR8B2
NPN NC
PNP NO
PNP NC
E2E-X5MF1
E2E-X5MF2
PNP NO
PNP NC
NPN NO
E2E-X10ME1(See notes
1, 2, 3, and 4.)
E2E-X1C1
(See notes 1 and 2.)
M5
1 mm
1 mm
NPN NO
E2E-X10ME2
(See notes 3 and 4.)
NPN NC
E2E-X1C2
E2E-X1B1
E2E-X1B2
NPN NC
PNP NO
PNP NC
NPN NO
E2E-X10MF1
E2E-X10MF2
PNP NO
PNP NC
NPN NO
E2E-C1C1
(See notes 1 and 2.)
5.4
dia.
E2E-X18ME1(See notes
1, 2, 3, and 4.)
E2E-C1C2
E2E-C1B1
E2E-C1B2
NPN NC
PNP NO
PNP NC
E2E-X18ME2
NPN NC
(See notes 3 and 4.)
E2E-X18MF1
E2E-X18MF2
PNP NO
PNP NC
E2E-X1R5E1
(See notes 1 and 2.)
M8
1.5 mm NPN NO
Note 1. Cables with a length of 5 m are also available. Specify the
cable length at the end of the model number (e.g., E2E-X2E1
5M).
E2E-X1R5E2
E2E-X1R5F1
E2E-X1R5F2
NPN NC
PNP NO
PNP NC
2. Models with a robotics cable are also available. These
models are E2E-X@E1-R (e.g., E2E-X5E1-R).
3. Models with a different frequency are also available. These
models are E2E-X@E@5 (e.g., E2E-X5E15).
4. These models have e-CON connectors (0.3 m cable length),
which is indicated by the suffix “-ECON” (e.g., E2E-X2E1-
ECON).
E2E-X2E1 (See notes 1,
2, 3, and 4.)
M12 2 mm
M18 5 mm
M30 10 mm
NPN NO
E2E-X2E2
(See notes 3 and 4.)
NPN NC
E2E-X2F1
E2E-X2F2
PNP NO
PNP NC
NPN NO
E2E-X5E1 (See notes 1,
2, 3, and 4.)
AC 2-wire/Pre-wired Models
E2E-X5E2
(See notes 3 and 4.)
NPN NC
Size
Sensing
distance
Operation
mode
Model
E2E-X5F1
E2E-X5F2
PNP NO
PNP NC
NPN NO
Shielded M8
1.5 mm
NO
E2E-X1R5Y1
E2E-X1R5Y2
NC
NO
E2E-X10E1 (See notes
1, 2, 3, and 4.)
M12
2 mm
E2E-X2Y1
(See notes 1 and 2.)
E2E-X10E2
(See notes 3 and 4.)
NPN NC
NC
NO
E2E-X2Y2
M18
M30
5 mm
E2E-X5Y1
(See notes 1 and 2.)
E2E-X10F1
E2E-X10F2
PNP NO
PNP NC
NC
NO
E2E-X5Y2
10 mm
E2E-X10Y1
(See notes 1 and 2.)
NC
NO
NC
NO
E2E-X10Y2
E2E-X2MY1
E2E-X2MY2
Un-
shielded
M8
2 mm
5 mm
M12
E2E-X5MY1
(See notes 1 and 2.)
NC
NO
E2E-X5MY2
M18
M30
10 mm
18 mm
E2E-X10MY1
(See note 1.)
NC
NO
E2E-X10MY2
E2E-X18MY1
(See note 1.)
NC
E2E-X18MY2
Note 1. Models with a different frequency are also available. These
models are E2E-X@Y@5 (e.g., E2E-X5Y15).
2. Cables with a length of 5 m are also available. Specify the
cable length at the end of the model number (e.g., E2E-X2Y1
5M).
E2E/E2E2 Cylindrical Proximity Sensor
3
DC 3-wire/Connector Models
AC 2-wire/Connector Models
Connector
Size
Sensing
Output
Model
Size
Sensing
distance
Operation
mode
Model
distance configuration
M12
Shielded M8
1.5 mm
NPN NO
NPN NC
PNP NO
PNP NC
NPN NO
NPN NC
PNP NO
PNP NC
NPN NO
NPN NC
PNP NO
PNP NC
NPN NO
NPN NC
PNP NO
PNP NC
NPN NO
NPN NC
PNP NO
PNP NC
NPN NO
NPN NC
PNP NO
PNP NC
NPN NO
NPN NC
PNP NO
PNP NC
NPN NO
NPN NC
PNP NO
PNP NC
NPN NO
NPN NC
PNP NO
PNP NC
NPN NO
NPN NC
PNP NO
PNP NC
NPN NO
NPN NC
PNP NO
PNP NC
NPN NO
NPN NC
PNP NO
PNP NC
E2E-X1R5E1-M1
E2E-X1R5E2-M1
E2E-X1R5F1-M1
E2E-X1R5F2-M1
E2E-X2E1-M1
Shielded M12
2 mm
NO
E2E-X2Y1-M1
NC
NO
NC
NO
NC
NO
NC
NO
NC
NO
NC
E2E-X2Y2-M1
M18
M30
5 mm
E2E-X5Y1-M1
E2E-X5Y2-M1
M12 2 mm
M18 5 mm
M30 10 mm
10 mm
5 mm
E2E-X10Y1-M1
E2E-X10Y2-M1
E2E-X5MY1-M1
E2E-X5MY2-M1
E2E-X10MY1-M1
E2E-X10MY2-M1
E2E-X18MY1-M1
E2E-X18MY2-M1
E2E-X2E2-M1
E2E-X2F1-M1
Un-
shielded
M12
M18
M30
E2E-X2F2-M1
E2E-X5E1-M1
10 mm
18 mm
E2E-X5E2-M1
E2E-X5F1-M1
E2E-X5F2-M1
E2E-X10E1-M1
E2E-X10E2-M1
E2E-X10F1-M1
E2E-X10F2-M1
E2E-X2ME1-M1
E2E-X2ME2-M1
E2E-X2MF1-M1
E2E-X2MF2-M1
E2E-X5ME1-M1
E2E-X5ME2-M1
E2E-X5MF1-M1
E2E-X5MF2-M1
E2E-X10ME1-M1
E2E-X10ME2-M1
E2E-X10MF1-M1
E2E-X10MF2-M1
E2E-X18ME1-M1
E2E-X18ME2-M1
E2E-X18MF1-M1
E2E-X18MF2-M1
E2E-CR8C1-M5
E2E-CR8C2-M5
E2E-CR8B1-M5
E2E-CR8B2-M5
E2E-X1C1-M5
AC/DC 2-wire/Pre-wired Models
Size
Sensing
distance
Operation
mode
Model
Un-
shielded
M8
2 mm
Shielded M12
M18
3 mm
7 mm
NO
E2E-X3T1
E2E-X7T1
(See note 2.)
M12 5 mm
M18 10 mm
M30 18 mm
M30
10 mm
E2E-X10T1
Note 1. These models do not conform to CE standards.
2. Cables with a length of 5 m are also available as standard
models. Specify the cable length at the end of the model
number (e.g., E2E-X7T1 5M).
M8-3 pin
Shielded 4 dia. 0.8 mm
M5
1 mm
E2E-X1C2-M5
E2E-X1B1-M5
E2E-X1B2-M5
M8
Shielded M8
1.5 mm
2 mm
E2E-X1R5E1-M3
E2E-X1R5E2-M3
E2E-X1R5F1-M3
E2E-X1R5F2-M3
E2E-X2ME1-M3
E2E-X2ME2-M3
E2E-X2MF1-M3
E2E-X2MF2-M3
Un-
shielded
M8
4
E2E/E2E2 Cylindrical Proximity Sensor
E2E2
DC 2-wire/Pre-wired Models
Size
Sensing distance
Operation mode
NO (See note.)
Model
Shielded
M12
M18
M30
M12
M18
M30
3 mm
E2E2-X3D1
E2E2-X3D2
E2E2-X7D1
E2E2-X7D2
E2E2-X10D1
E2E2-X10D2
E2E2-X8MD1
E2E2-X8MD2
NC
7 mm
NO (See note.)
NC
10 mm
8 mm
NO (See note.)
NC
Unshielded
NO (See note.)
NC
14 mm
20 mm
NO (See note.)
NC
E2E2-X14MD1
E2E2-X14MD2
E2E2-X20MD1
E2E2-X20MD2
NO (See note.)
NC
Note: In addition to the above models, E2E-X@D15 models (e.g., E2E-X3D15), which are different in frequency from the above models, are
available.
DC 3-wire/Pre-wired Models
Size
Sensing distance
Output configuration
NPN NO
Model
Shielded
M12
M18
M30
M12
M18
M30
2 mm
E2E2-X2C1
E2E2-X2C2
E2E2-X2B1
E2E2-X2B2
E2E2-X5C1
E2E2-X5C2
E2E2-X5B1
E2E2-X5B2
E2E2-X10C1
E2E2-X10C2
E2E2-X10B1
E2E2-X10B2
E2E2-X5MC1
E2E2-X5MC2
E2E2-X5MB1
E2E2-X5MB2
NPN NC
PNP NO
PNP NC
NPN NO
NPN NC
PNP NO
PNP NC
NPN NO
NPN NC
PNP NO
PNP NC
NPN NO
NPN NC
PNP NO
PNP NC
NPN NO
NPN NC
PNP NO
PNP NC
NPN NO
NPN NC
PNP NO
PNP NC
5 mm
10 mm
5 mm
Unshielded
10 mm
18 mm
E2E2-X10MC1
E2E2-X10MC2
E2E2-X10MB1
E2E2-X10MB2
E2E2-X18MC1
E2E2-X18MC2
E2E2-X18MB1
E2E2-X18MB2
E2E/E2E2 Cylindrical Proximity Sensor
5
DC 3-wire/Connector Models
Size
Sensing distance
Output configuration
NPN NO
Model
E2E2-X2C1-M1
Shielded
M12
M18
M30
M12
M18
M30
2 mm
NPN NC
PNP NO
PNP NC
NPN NO
NPN NC
PNP NO
PNP NC
NPN NO
NPN NC
PNP NO
PNP NC
NPN NO
NPN NC
PNP NO
PNP NC
NPN NO
NPN NC
PNP NO
PNP NC
NPN NO
NPN NC
PNP NO
PNP NC
E2E2-X2C2-M1
E2E2-X2B1-M1
E2E2-X2B2-M1
5 mm
E2E2-X5C1-M1
E2E2-X5C2-M1
E2E2-X5B1-M1
E2E2-X5B2-M1
10 mm
5 mm
E2E2-X10C1-M1
E2E2-X10C2-M1
E2E2-X10B1-M1
E2E2-X10B2-M1
E2E2-X5MC1-M1
E2E2-X5MC2-M1
E2E2-X5MB1-M1
E2E2-X5MB2-M1
E2E2-X10MC1-M1
E2E2-X10MC2-M1
E2E2-X10MB1-M1
E2E2-X10MB2-M1
E2E2-X18MC1-M1
E2E2-X18MC2-M1
E2E2-X18MB1-M1
E2E2-X18MB2-M1
Unshielded
10 mm
18 mm
AC 2-wire/Pre-wired Models
Size
Sensing distance
Operation mode
Model
E2E2-X2Y1
Shielded
M12
M18
M30
M12
M18
M30
2 mm
NO
NC
NO
NC
NO
NC
NO
NC
NO
NC
NO
NC
E2E2-X2Y2
5 mm
E2E2-X5Y1
E2E2-X5Y2
10 mm
5 mm
E2E2-X10Y1
E2E2-X10Y2
E2E2-X5MY1
E2E2-X5MY2
E2E2-X10MY1
E2E2-X10MY2
E2E2-X18MY1
E2E2-X18MY2
Unshielded
10 mm
18 mm
6
E2E/E2E2 Cylindrical Proximity Sensor
AC 2-wire/Connector Models
Size
Sensing distance
Operation mode
Model
E2E2-X2Y1-M4
Shielded
M12
M18
M30
M12
M18
M30
2 mm
NO
NC
NO
NC
NO
NC
NO
NC
NO
NC
NO
NC
E2E2-X2Y2-M4
5 mm
E2E2-X5Y1-M4
E2E2-X5Y2-M4
10 mm
5 mm
E2E2-X10Y1-M4
E2E2-X10Y2-M4
E2E2-X5MY1-M4
E2E2-X5MY2-M4
E2E2-X10MY1-M4
E2E2-X10MY2-M4
E2E2-X18MY1-M4
E2E2-X18MY2-M4
Unshielded
10 mm
18 mm
E2E/E2E2 Cylindrical Proximity Sensor
7
Specifications
■ Ratings/Characteristics
E2E
E2E-X@D@ DC 2-wire Models
Size
M8
M12
Unshielded
M18
Unshielded
E2E-X7D@ E2E-X14MD@ E2E-X10D@ E2E-X20MD@
M30
Type
Shielded
E2E-X2D@
2 mm 10%
Unshielded
Shielded
E2E-X3D@
3 mm 10%
0 to 2.4 mm
Shielded
Shielded Unshielded
Item
E2E-X4MD@
4 mm 10%
0 to 3.2 mm
E2E-X8MD@
8 mm 10%
0 to 6.4 mm
Sensing distance
7 mm 10%
0 to 5.6 mm
14 mm 10% 10 mm 10% 20 mm 10%
0 to 11.2 mm 0 to 8.0 mm 0 to 16.0 mm
Set distance (See note 1.) 0 to 1.6 mm
Differential travel
Sensing object
15% max. of sensing distance 10% max. of sensing distance
Ferrous metal (The sensing distance decreases with non-ferrous metal, refer to Engineering Data.)
Standard sensing object Iron, 8 x 8 x
Iron, 20 x 20 x Iron,12 x 12 x Iron,30 x 30 x Iron, 18 x 18 x Iron, 30 x 30 x Iron,30 x 30 x Iron, 54 x 54 x
1 mm
1 mm
1 mm
1 mm
1 mm
1 mm
1 mm
1 mm
Response speed (See
note 2.)
1.5 kHz
1.0 kHz
1.0 kHz
0.8 kHz
0.5 kHz
0.4 kHz
0.4 kHz
0.1 kHz
Power supply voltage
12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
0.8 mA max.
(operating voltage range)
Leakage current
Control
output
Load
current
3 to 100 mA
Diagnostic output: 50 mA for -D1(5)S models
Residual
voltage
(See note 3.)
3 V max. (Load current: 100 mA, Cable length: 2 m. M1J-T models only: 5 V max.)
Indicator
D1 Models: Operation indicator (red LED), setting indicator (green LED)
D2 Models: Operation indicator (red LED)
Operation mode
(with sensing object
approaching)
D1 Models: NO
D2 Models: NC
For details, refer to Timing Charts.
Diagnostic output delay 0.3 to 1 s
Protection circuits
Ambient temperature
Ambient humidity
Surge suppressor, output load short-circuit protection (for control and diagnostic output)
Operating: –25°C to 70°C, Storage: –40°C to 85°C (with no icing or condensation)
Operating/Storage: 35% to 95% (with no condensation)
Temperature influence
15% max. of sensing
distance at 23°C in the
temperature range of –25°C to
70°C
10% max. of sensing distance at 23°C in the temperature range of –25°C to 70°C
Voltage influence
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
1% max. of sensing distance in the rated voltage range 15%
50 MΩ min. (at 500 VDC) between current-carrying parts and case
1,000 VAC at 50/60 Hz for 1 min between current-carrying parts and case
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
500 m/s2 10 times each in X, 1,000 m/s2 10 times each in X, Y, and Z directions
Y, and Z directions
Degree of protection
Connection method
IEC 60529 IP67 (Pre-wired models, pre-wired connector models: in-house standard for oil resistance (former JEM standard
equivalent to IP67g)) (See note 4.)
Pre-wired models (standard length: 2 m), connector models, pre-wired connector models (standard length: 0.3 m)
Weight
(packed
state)
Pre-wired
models
Approx. 60 g
Approx. 70 g
Approx. 130 g
Approx. 175 g
Pre-wired
connector
models
---
Approx. 40 g
Approx. 70 g
Approx. 110 g
Connector Approx. 15 g
models
Approx. 25 g
Approx. 40 g
Approx. 90 g
Material
Case
Stainless steel (SUS303)
Brass-nickel plated
Sensing
surface
PBT (polybutylene terephthalate)
Clamping
nuts
Brass-nickel plated
Iron-zinc plated
Toothed
washer
Accessories
Instruction manual
Note 1. Use the E2E within the range in which the setting indicator (green LED) is ON (except D2 models).
2. The response speed is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard
sensing object, and a set distance of half the sensing distance.
3. The residual voltage of each E2E model with the model number suffix “-M1J-T” is 5 V. When connecting an E2E model with the suffix “-
M1J-T” to a device, make sure that the device can withstand the residual voltage.
4. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
8
E2E/E2E2 Cylindrical Proximity Sensor
E2E-X@E@/F@ DC 3-wire Models
Size
M8
M12
Unshielded
M18
Unshielded
M30
Unshielded
Type
Shielded
Unshielded
Shielded
Shielded
Shielded
E2E-X10ME@/
F@
E2E-X18ME@/
F@
Item
E2E-X1R5E@/ E2E-X2ME@/ E2E-X2E@/ E2E-X5ME@/ E2E-X5E@/
E2E-X10E@/
F@
F@
1.5 mm 10% 2 mm 10%
0 to 1.2 mm 0 to 1.6 mm
10% max. of sensing distance
Ferrous metal (The sensing distance decreases with non-ferrous metal, refer to Engineering Data.)
F@
F@
F@
F@
Sensing distance
Set distance
2 mm 10%
0 to 1.6 mm
5 mm 10%
0 to 4.0 mm
5 mm 10%
0 to 4.0 mm
10 mm 10% 10 mm 10% 18 mm 10%
0 to 8.0 mm 0 to 8.0 mm 0 to 14.0 mm
Differential travel
Sensing object
Standard sensing
object
Iron, 8 x 8 x
1 mm
Iron, 12 x 12 x Iron, 12 x 12 x Iron, 15 x 15 x Iron, 18 x 18 x Iron, 30 x 30 x Iron, 30 x 30 x Iron, 54 x 54 x
1 mm
1 mm
1 mm
1 mm
1 mm
1 mm
1 mm
Response speed (See 2.0 kHz
note 1.)
0.8 kHz
1.5 kHz
0.4 kHz
0.6 kHz
0.2 kHz
0.4 kHz
0.1 kHz
Power supply voltage
(operating voltage
range) (See note 2.)
12 to 24 VDC (10 to 40 VDC), ripple (p-p): 10% max.
Current consumption
13 mA max.
Control Load current 200 mA max.
output
(See note 2.)
Residual
voltage
2 V max. (Load current: 200 mA, Cable length: 2 m)
Indicator
Operation indicator (red LED)
Operation mode
(with sensing object
approaching)
E1 F1 Models: NO
E2 F2 Models: NC
For details, refer to Timing Charts.
Protection circuits
Power supply reverse polarity protection, surge suppressor, output load short-circuit protection
Ambient temperature
(See note 2)
Operating/Storage: –40°C to 85°C (with no icing or condensation)
Ambient humidity
Operating/Storage: 35% to 95% (with no icing)
Temperature influence
15% max. of sensing distance at 23°C in the temperature range of –40°C to 85°C
10% max. of sensing distance at 23°C in the temperature range of –25°C to 70°C
Voltage influence
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
1% max. of sensing distance in the rated voltage range 15%
50 MΩ min. (at 500 VDC) between current-carrying parts and case
1,000 VAC at 50/60 Hz for 1 min between current-carrying parts and case
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
500 m/s2 10 times each in X, Y, 1,000 m/s2 10 times each in X, Y, and Z directions
and Z directions
Degree of protection
Connection method
IEC 60529 IP67 (Pre-wired models: in-house standard for oil resistance (former JEM standard equivalent to IP67g)) (See note
3.)
Pre-wired models (standard length 2 m), connector models
Weight
Pre-wired
Approx. 65 g
Approx. 75 g
Approx. 150 g
Approx. 40 g
Approx. 195 g
Approx. 90 g
(packed models
state)
Connector
Approx. 15 g
Approx. 25 g
models
Material Case
Stainless steel (SUS303)
Brass-nickel plated
Sensing
surface
PBT (polybutylene terephthalate)
Clamping
nuts
Brass-nickel plated
Toothed
washer
Iron-zinc plated
Accessories
Instruction manual
Note 1. The response speed is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard
sensing object, and a set distance of half the sensing distance.
2. When using an E2E with an M8 connector at an ambient temperature range between 70°C and 85°C, supply 10 to 30 VDC to the E2E and
make sure that the E2E has a control output of 100 mA maximum.
3. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
E2E/E2E2 Cylindrical Proximity Sensor
9
E2E-C@C@/B@, E2E-X1C@/B@ DC 3-wire Models
Size
3 dia.
4 dia.
M5
5.4 dia.
Type
Shielded
Item
E2E-CR6C@/B@
E2E-CR8C@/B@
E2E-X1C@/B@
E2E-C1C@/B@
Sensing distance
Set distance
0.6 mm 15%
0 to 0.4 mm
15% max. of sensing distance
Ferrous metal (The sensing distance decreases with non-ferrous metal, refer to Engineering Data.)
0.8 mm 15%
1 mm 15%
0 to 0.5 mm
0 to 0.7 mm
Differential travel
Sensing object
Standard sensing object
Iron: 3 x 3 x 1 mm
2 kHz
Iron: 5 x 5 x 1 mm
3 kHz
Response speed (See note.)
Power supply voltage
(operating voltage range)
12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
Current consumption
10 mA max.
17 mA max.
Control output
Load current
Open-collector output
80 mA max. (at 30 VDC
max.)
Open-collector output 100 mA max. (at 30 VDC max.)
Residual
voltage
1 V max. (Load current: 2 V max. (Load current: 100 mA, Cable length: 2 m)
80 mA, Cable length:
2 m)
Indicator
Operation indicator (red LED)
Operation mode (with sensing object C1/-B1 Models:NO
approaching)
C2/-B2 Models:NC
For details, refer to Timing Charts.
Protection circuits
Ambient temperature
Ambient humidity
Temperature influence
Voltage influence
Power supply reverse polarity protection, surge suppressor
Operating/Storage: –25°C to 70°C (with no icing or condensation)
Operating/Storage: 35% to 95%
15% max. of sensing distance at 23°C in the temperature range of –25°C to 70°C
5% max. of sensing
distance in the rated
voltage range 10%
2.5% max. of sensing distance in the rated voltage range 15%
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
50 MΩ min. (at 500 VDC) between current-carrying parts and case
500 VAC at 50/60 Hz for 1 min between current-carrying parts and case
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
500 m/s2 10 times each in X, Y, and Z directions
Degree of protection
IEC 60529 IP66
IEC 60529 IP67 (Pre-wired models: in-house standard for oil resistance (former
JEM standard equivalent to IP67g)) (See note 2.)
Connection method
Pre-wired models
(Standard length 2 m)
Pre-wired models (Standard length 2 m), connector models
Weight
(packed state)
Pre-wired
models
Approx. 60 g
Connector
models
---
Approx. 12 g
Approx. 15 g
---
Material
Case
Stainless steel (SUS303)
Brass-nickel plated
Sensing surface Heat-resistant ABS
Clamping nuts ---
Brass-nickel plated
Iron-zinc plated
Toothed washer ---
Accessories
Instruction manual
Note 1. The response speed is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard
sensing object, and a set distance of half the sensing distance.
2. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
10
E2E/E2E2 Cylindrical Proximity Sensor
E2E-X@Y@ AC 2-wire Models
Size
M8
M12
Unshielded
E2E-X2MY@ E2E-X2Y@ E2E-X5MY@ E2E-X5Y@
M18
Unshielded
E2E-X10MY@
M30
Unshielded
E2E-X18MY@
Unshielded
Type
Shielded
E2E-X1R5Y@
Shielded
Shielded
Shielded
Item
E2E-X10Y@
Sensing distance
Set distance
1.5 mm 10% 2 mm 10% 2 mm 10% 5 mm 10% 5 mm 10% 10 mm 10% 10 mm 10% 18 mm 10%
0 to 1.2 mm 0 to 1.6 mm 0 to 1.6 mm 0 to 4.0 mm 0 to 4.0 mm 0 to 8.0 mm 0 to 8.0 mm 0 to 14.0 mm
10% max. of sensing distance
Differential travel
Sensing object
Ferrous metal (The sensing distance decreases with non-ferrous metal, refer to Engineering Data.)
Standard sensing
object
Iron, 8 x 8 x Iron,12 x 12 x Iron, 12 x 12 x Iron, 15 x 15 x Iron, 18 x 18 x Iron, 30 x 30 x Iron, 30 x 30 x Iron, 54 x 54 x
1 mm
25 Hz
1 mm
1 mm
1 mm
1 mm
1 mm
1 mm
1 mm
Response speed
Power supply
voltage (operating
voltage range)
(See note 1.)
24 to 240 VAC, 50/60 Hz (20 to 264 VAC)
Leakage current
1.7 mA max.
Control Load
output current
(See note
5 to 100 mA
5 to 200 mA
5 to 300 mA
2.)
Residual
voltage
Refer to Engineering Data.
Indicator
Operation indicator (red LED)
Y1 Models: NO
Operation mode
(with sensing object Y2 Models: NC
approaching)
For details, refer to Timing Charts.
Surge suppressor
Protection circuit
Ambienttemperature Operating/Storage: –25°C to Operating/Storage: –40°C to 85°C (with no icing or condensation)
(See notes 1 and 2.) 70°C (with no icing or
condensation)
Ambient humidity
Operating/Storage: 35% to 95% (with no condensation)
Temperature
influence
10% max. of sensing
distance at 23°C in the
temperature range of –25°C
to 70°C
15% max. of sensing distance at 23°C in the temperature range of –40°C to 85°C
10% max. of sensing distance at 23°C in the temperature range of –25°C to 70°C
Voltage influence
1% max. of sensing distance in the rated voltage range 15%
Insulation resistance 50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength
4,000 VAC at 50/60 Hz for 1 min between current-carrying parts and case (2,000 VAC for M8 Models)
Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
500 m/s2 10 times each in X, 1,000 m/s2 10 times each in X, Y, and Z directions
Y, and Z directions
Shock resistance
Degree of protection IEC 60529 IP67 (Pre-wired models: in-house standard for oil resistance (former JEM standard equivalent to IP67g)) (See
note 3.)
Connection method Pre-wired models (standard length 2 m), connector models
Weight Pre-wired
(packed models
state)
Approx. 60 g
Approx. 70 g
Approx. 130 g
Approx. 40 g
Approx. 175 g
Approx. 90 g
Connector Approx. 15 g
Approx. 25 g
models
Material Case
Stainless steel (SUS303)
Brass-nickel plated
Sensing
surface
PBT (polybutylene terephthalate)
Clamping
nuts
Brass-nickel plated
Iron-zinc plated
Toothed
washer
Accessories
Instruction manual
Note 1. When supplying 24 VAC to any of the above models, make sure that the operating ambient temperature range is over –25°C.
2. When using an M18-or M30-sized E2E within an ambient temperature of 70°C to 85°C, make sure that the E2E has a control output of 5
to 200 mA max.
3. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
E2E/E2E2 Cylindrical Proximity Sensor
11
AC/DC 2-wire Models
Size
M12
M18
M30
Type
Shielded
E2E-X7T1
Item
Sensing distance
Set distance
E2E-X3T1
E2E-X10T1
3 mm 10%
7 mm 10%
0 to 5.6 mm
10 mm 10%
0 to 8.0 mm
0 to 2.4 mm
Differential travel
Sensing object
10% max. of sensing distance
Ferrous metal (The sensing distance decreases with non-ferrous metal, refer to Engineering Data.)
Standard sensing object
Iron, 12 x 12 x 1 mm
1.0 kHz
Iron, 18 x 18 x 1 mm
0.5 kHz
Iron, 30 x 30 x 1 mm
0.4 kHz
Response speed
(See note 1.)
DC
AC
25 Hz
Power supply voltage
24 to 240 VDC (20 to 264 VDC)/48 to 240 VAC (40 to 264 VAC)
(operating voltage range) (See note 2.)
Leakage current
1 mA DC max., 2 mA AC max.
5 to 100 mA
Control output
Load current
Residual
voltage
6.0 VDC max. (Load current: 100 mA, Cable length: 2 m)
10 VAC max. (Load current: 5 mA, Cable length: 2 m)
Indicator
Operation indicator (red LED), setting indicator (green LED)
Operation mode
NO
(with sensing object approaching)
Protection circuits
For details, refer to Timing Charts.
Output load short-circuit protection (at 20 to 40 VDC), Surge suppressor
Operating: –25°C to 70°C, Storage: –40°C to 85°C (with no icing or condensation)
Operating/Storage: 35% to 95% (with no condensation)
Ambient temperature
Ambient humidity
Temperature influence
Voltage influence
10% max. of sensing distance at 23°C in the temperature range of –25°C to 70°C
1% max. of sensing distance in the rated voltage range 15%
Insulation resistance
Dielectric strength
50 MΩ min. (at 500 VDC) between current-carrying parts and case
4,000 VAC at 50/60 Hz for 1 min between current-carrying parts and case
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
1,000 m/s2 10 times each in X, Y, and Z directions
Vibration resistance
Shock resistance
Degree of protection
IEC 60529 IP67
In-house standard for oil resistance (former JEM standard equivalent to IP67g) (See note 3.)
Connection method
Pre-wired Models (standard length 2 m)
Weight (packed state)
Approx. 80 g
Approx. 140 g
Approx. 190 g
Material
Case
Brass-nickel plated
Sensing surface PBT (polybutylene terephthalate)
Clamping nuts Brass-nickel plated
Toothed washer Iron-zinc plated
Instruction manual
Accessories
Note 1. The response speed is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard
sensing object, and a set distance of half the sensing distance.
2. Power supply voltage waveform: Use a sine wave for the power supply. Using a rectangular AC power supply may result in faulty reset.
3. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
12
E2E/E2E2 Cylindrical Proximity Sensor
E2E2
E2E2-X@D@ DC 2-wire Models
Size
M12
M18
M30
Type
Shielded
Unshielded
Shielded
Unshielded
Shielded
E2E2-X10D@
10 mm 10%
0 to 8.0 mm
Unshielded
Item
E2E2-X3D@
3 mm 10%
0 to 2.4 mm
E2E2-X8MD@
8 mm 10%
0 to 6.4 mm
E2E2-X7D@
7 mm 10%
0 to 5.6 mm
E2E2-X14MD@
14 mm 10%
0 to 11.2 mm
E2E2-X20MD@
20 mm 10%
0 to 16.0 mm
Sensing distance
Set distance
(See note 1.)
Differential travel
Sensing object
10% max. of sensing distance
Ferrous metal (The sensing distance decreases with non-ferrous metal, refer to Engineering Data.)
Standard sensing
object
Iron, 12 x 12 x
1 mm
Iron, 30 x 30 x
1 mm
Iron, 18 x 18 x
1 mm
Iron, 30 x 30 x
1 mm
Iron, 30 x 30 x
1 mm
Iron, 54 x 54 x
1 mm
Response speed (See 1.0 kHz
note 2.)
0.8 kHz
0.5 kHz
0.4 kHz
0.4 kHz
0.1 kHz
Power supply voltage 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
(operating voltage
range)
Leakage current
0.8 mA max.
3 to 100 mA
Control
output
Load
current
Residual 3.0 V max. (Load current: 100 mA, Cable length: 2 m)
voltage
Indicator
D1 Models: Operation indicator (red LED), setting indicator (green LED)
D2 Models: Operation indicator (red LED)
Operation mode
(with sensing object
approaching)
D1 Models: NO
D2 Models: NC
For details, refer to Timing charts.
Protection circuits
Surge suppressor, output load short-circuit protection
Ambient temperature Operating/Storage: –25°C to 70°C (with no icing or condensation)
Ambient humidity Operating/Storage: 35% to 95% (with no condensation)
Temperature influence 10% max. of sensing distance at 23°C in the temperature range of –25°C to 70°C
Voltage influence 1% max. of sensing distance in the rated voltage range 15%
Insulation resistance 50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength
Vibration resistance
Shock resistance
1,000 VAC at 50/60 Hz for 1 min between current-carrying parts and case
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
1,000 m/s2 10 times each in X, Y, and Z directions
Degree of protection
IEC 60529 IP67
In-house standard for oil resistance (former JEM standard equivalent to IP67g) (See note 3.)
Connection method
Pre-wired models (standard length 2 m)
Weight (packed state) Approx. 65 g
Approx. 150 g
Approx. 210 g
Material
Case
Brass
Sensing PBT (polybutylene terephthalate)
surface
Clamping Brass-nickel plated
nuts
Toothed Iron-zinc plated
washer
Accessories
Instruction manual
Note 1. Use the E2E2 within the range in which the setting indicator (green LED) is lit (except D2 models).
2. The response speed is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard
sensing object, and a set distance of half the sensing distance.
3. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
E2E/E2E2 Cylindrical Proximity Sensor
13
E2E2-X@C@/B@ DC 3-wire Models
Size
M12
M18
M30
Type
Shielded
Unshielded
Shielded
Unshielded
Shielded
Unshielded
Item
E2E2-X2C@/
B@
E2E2-X5MC@/B@
E2E2-X5C@/
B@
E2E2-X10MC@/
B@
E2E2-X10C@/
B@
E2E2-X18MC@/
B@
Sensing distance
Set distance
2 mm 10%
0 to 1.6 mm
5 mm 10%
0 to 4.0 mm
5 mm 10%
0 to 4.0 mm
10 mm 10%
0 to 8.0 mm
10 mm 10%
0 to 8.0 mm
18 mm 10%
0 to 14.0 mm
Differential travel
Sensing object
10% max. of sensing distance
Ferrous metal (The sensing distance decreases with non-ferrous metal, refer to Engineering Data.)
Standard sensing
object
Iron, 12 x 12 x
1 mm
Iron, 15 x 15 x
1 mm
Iron, 18 x 18 x
1 mm
Iron, 30 x 30 x
1 mm
Iron, 30 x 30 x
1 mm
Iron, 54 x 54 x
1 mm
Response speed (See 1.5 kHz
note 1.)
0.4 kHz
0.6 kHz
0.2 kHz
0.4 kHz
0.1 kHz
Power supply voltage 12 to 24 VDC (10 to 55 VDC), ripple (p-p): 10% max.
(operating voltage
range) (See note.)
Current consumption 13 mA max.
Control
output
Load
current
200 mA max., open collector (55 VDC max.)
Residual 2 V max. (Load current: 200 mA, Cable length: 2 m)
voltage
Indicator
Operation indicator (red LED)
Operation mode (with B1/C1 Models: NO
sensing object
approaching)
B2/C2 Models: NC
For details, refer to Timing Charts.
Protection circuits
Surge suppressor, output load short-circuit protection, power supply reverse polarity protection
Ambient temperature Operating/Storage: –40°C to 85°C (with no icing or condensation)
Ambient humidity Operating/Storage: 35% to 95% (with no condensation)
Temperature influence 15% max. of sensing distance at 23°C in the temperature range of –40°C to 85°C
10% max. of sensing distance at 23°C in the temperature range of –25°C to 70°C
Voltage influence
1% max. of sensing distance in the rated voltage range 15%
Insulation resistance 50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength
Vibration resistance
Shock resistance
1,000 VAC at 50/60 Hz for 1 min between current-carrying parts and case
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
1,000 m/s2 10 times each in X, Y, and Z directions
Degree of protection
IEC 60529 IP67
In-house standard for oil resistance (former JEM standard equivalent to IP67g) (See note 3.)
Connection method
Pre-wired models (standard length: 2 m)
Weight (packed state) Approx. 75 g
Approx. 160 g
Approx. 220 g
Material
Case
Brass
Sensing PBT (polybutylene terephthalate)
surface
Clamping Brass-nickel plated
nuts
Toothed Iron-zinc plated
washer
Accessories
Instruction manual
Note 1. The response speed is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard
sensing object, and a set distance of half the sensing distance.
2. An unsmoothed full-wave rectification power supply of 24 VDC 20% (average value) can be used.
3. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
14
E2E/E2E2 Cylindrical Proximity Sensor
E2E2-X@Y@ AC 2-wire Models
Size
M12
M18
M30
Type
Shielded
Unshielded
Shielded
Unshielded
Shielded
E2E2-X10Y@
10 mm 10%
0 to 8.0 mm
Unshielded
Item
Sensing distance
Set distance
E2E2-X2Y@
2 mm 10%
0 to 1.6 mm
E2E2-X5MY@
5 mm 10%
0 to 4.0 mm
E2E2-X5Y@
5 mm 10%
0 to 4.0 mm
E2E2-X10MY@
10 mm 10%
0 to 8.0 mm
E2E2-X18MY@
18 mm 10%
0 to 14.0 mm
Differential travel
Sensing object
10% max. of sensing distance
Ferrous metal (The sensing distance decreases with non-ferrous metal, refer to Engineering Data.)
Standard sensing object Iron, 12 x 12 x
Iron, 15 x 15 x
1 mm
Iron, 18 x 18 x
1 mm
Iron, 30 x 30 x
1 mm
Iron, 30 x 30 x
1 mm
Iron, 54 x 54 x
1 mm
1 mm
Response speed
25 Hz
Power supply voltage
(operating voltage
range) (See note 1.)
24 to 240 VAC, 50/60 Hz (20 to 264 VAC)
Leakage current
1.7 mA max.
Control
output
Load
5 to 200 mA
5 to 300 mA
current
(See note
2.)
Residual
voltage
Refer to Engineering Data.
Indicator
Operation indicator (red LED)
Operation mode (with
sensing object
approaching)
Y1 Models: NO
Y2 Models: NC
For details, refer to Timing Charts.
Ambient temperature
Ambient humidity
Operating/Storage: –40°C to 85°C (with no icing or condensation) (See notes 1 and 2.)
Operating/Storage: 35% to 95% (with no condensation)
Temperature influence
15% max. of sensing distance at 23°C in the temperature range of –40°C to 85°C
10% max. of sensing distance at 23°C in the temperature range of –25°C to 70°C
Voltage influence
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
1% max. of sensing distance in the rated voltage range 15%
50 MΩ min. (at 500 VDC) between current-carrying parts and case
4,000 VAC at 50/60 Hz for 1 min between current-carrying parts and case
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
1,000 m/s2, 10 times each in X, Y, and Z directions
Degree of protection
IEC 60529 IP67
In-house standard for oil resistance (former JEM standard equivalent to IP67g) (See note 3.)
Connection method
Pre-wired models (standard length: 2 m)
Weight (packed state)
Approx. 65 g
Approx. 150 g
Approx. 210 g
Material
Case
Brass
Sensing
surface
PBT (polybutylene terephthalate)
Clamping
nuts
Brass-nickel plated
Iron-zinc plated
Toothed
washer
Accessories
Instruction manual
Note 1. When supplying 24 VAC to any of the above models, make sure that the operating ambient temperature range is –25°C to 85°C.
2. When using an M18-or M30-sized E2E2 within an ambient temperature of 70°C to 85°C, make sure that the E2E2 has a control output of
5 to 200 mA maximum.
3. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
E2E/E2E2 Cylindrical Proximity Sensor
15
Engineering Data
E2E
Operating Range (Typical)
Shielded Models
E2E-X@D@
E2E-X@E@/F@
E2E-X@Y@
12
E2E-C@C@/B@
E2E-X@C@/B@
1.6
E2E-X@T1
12
Y
1.4
E2E-X10
E2E-X10
X
10
10
1.2
1.0
0.8
0.6
0.4
0.2
0
Y
E2E-X1/E2E-C1
8
8
6
4
2
X
E2E-X7
6
E2E-X3
E2E-X5
E2E-X2
E2E-CR8
E2E-CR6
E2E-X2
Y
4
2
0
X
E2E
-X1R5
0
−3.0
−2.0
−1.0
0
1.0
2.0
3.0
−20 −15 −10
−5
0
5
10
15
20
−15
−10
−5
0
5
10
15
Distance Y (mm)
Distance Y (mm)
Distance Y (mm)
Unshielded Models
E2E-X@MD@
E2E-X@ME@/F@
E2E-X@MY@
30
30
Y
X
25
25
20
15
20
15
10
5
E2E-X18M
E2E-X10M
E2E-X20M
E2E-X14M
Y
10
X
E2E-X5M
E2E-X2M
E2E-X8M
E2E-X4M
5
0
0
−30
−20
−10
0
10
20
30
−30
−20
−10
0
10
20
30
Distance Y (mm)
Distance Y (mm)
16
E2E/E2E2 Cylindrical Proximity Sensor
Leakage Current (Typical)
E2E-X@D@
E2E-X@Y@
E2E-X@T1
DC/AC
AC power supply
DC power supply
E2E-X10D1-N
E2E-X3D1-N
Proximity
Protective
resistance
Sensor
(when
OFF)
E2E-X2D1-N
E2E-X7D1-N
AC power
supply
Supply voltage (V)
Supply voltage (V)
Supply voltage (V)
Residual Output Voltage (Typical)
E2E-X@T1
E2E-X@D@
5
200 VAC
100 VAC
4
3
2
1
E2E-X@D1-M1J-T
E2E-X@D@
24 VDC
0
1
3
5
10
30
50 100
Load current (mA)
Load current (mA)
E2E-X@Y@
100 VAC
24 VAC
200 VAC
Residual output voltage
Residual output voltage
Residual output voltage
Proximity
Sensor
Proximity
Sensor
200 VAC
100 VAC
Proximity
Sensor
24 VAC
OFF
Residual
Residual
Residual
load
voltage
load
load
voltage
voltage
OFF
OFF
Load current (mA)
Load current (mA)
Load current (mA)
E2E/E2E2 Cylindrical Proximity Sensor
17
Sensing Distance vs. Sensing Object (Typical)
E2E-X2D@
E2E-X3D@
E2E-X7D@
E2E-X3T1
E2E-X7T1
t = 1 mm
t = 1 mm
Iron
Iron
Stainless steel
(SUS304)
Iron
Stainless steel
(SUS304)
Stainless steel
(SUS304)
Brass
Aluminum
Copper
Brass
Brass
Aluminum
Copper
Aluminum
Copper
t = 1 mm
Side length of sensing
object d (mm)
Side length of sensing
object d (mm)
Side length of sensing
object d (mm)
E2E-X10D@
E2E-X4MD@
E2E-X8MD@
E2E-X10T1
t = 1 mm
t = 1 mm
Iron
Iron
Iron
Stainless
steel
Stainless
Stainless
steel
(SUS304)
steel
(SUS304)
(SUS304)
Brass
Aluminum
Brass
Brass
Aluminum
Copper
Aluminum
Copper
t = 1 mm
Copper
Side length of sensing
object d (mm)
Side length of sensing
object d (mm)
Side length of sensing
object d (mm)
E2E-X14MD@
E2E-X20MD@
E2E-X1R5E@/F@
E2E-X1R5Y@
t = 1 mm
t = 1 mm
Iron
Iron
Stainless
steel
(SUS304)
Iron
Stainless steel
(SUS304)
Stainless
steel
Brass
Aluminum
Copper
t = 1 mm
(SUS304)
Brass
Brass
Aluminum
Aluminum
Copper
Side length of sensing
object d (mm)
Side length of sensing
object d (mm)
Side length of sensing
object d (mm)
18
E2E/E2E2 Cylindrical Proximity Sensor
E2E-X2E@/F@
E2E-X2Y@
E2E-X5E@/F@
E2E-X5Y@
E2E-X10E@F@
E2E-X10Y@
t = 1 mm
Iron
Iron
Iron
Stainless steel
(SUS304)
Stainless steel
(SUS304)
Stainless steel
(SUS304)
t = 1 mm
Brass
Brass
Brass
t = 1 mm
Aluminum
Aluminum
Aluminum
Side length of sensing object d (mm)
Side length of sensing object d (mm)
Side length of sensing object d (mm)
E2E-X2ME@/F@
E2E-X2MY@
E2E-X5ME@/F@
E2E-X5MY@
E2E-X10ME@/F@
E2E-X10MY
t = 1 mm
Iron
Iron
Iron
Stainless steel
(SUS304)
Stainless steel
(SUS304)
Stainless steel
(SUS304)
Brass
Brass
Alumi-
Brass
num
Copper
t = 1 mm
Aluminum
Aluminum
Side length of sensing object d (mm)
Side length of sensing object d (mm)
Side length of sensing object d (mm)
E2E-X18ME@/F@
E2E-X18MY@
E2E-CR6@@
E2E-CR8@@
0.7
t = 1 mm
t = 1 mm
Iron
0.6
0.5
0.4
0.3
0.2
0.1
Stainless
steel
(SUS304)
Iron
Iron
Brass
Stainless steel
(SUS304)
Aluminum
Stainless
steel
(SUS304)
Brass
Brass
@d
t = 1 mm
X
Aluminum
Copper
Aluminum
0
5
10
15
20
Side length of sensing object d (mm)
Side length of sensing object d (mm)
Side length of sensing object d (mm)
E2E-X1@@
E2E-C1@@
Iron
Stainless steel
(SUS304)
Brass
Aluminum
t = 1 mm
Side length of sensing object d (mm)
E2E/E2E2 Cylindrical Proximity Sensor
19
E2E2
Operating Range (Typical)
Shielded Models
E2E2-X@D@
E2E2-X@C@/B@
E2E2-X@Y@
3.0
12
10
12
E2E2-X10
E2E2-X10
2.5
2.0
1.5
1.0
0.5
0
10
Y
Y
8
6
4
2
0
8
X
E2E2-X2
E2E2-X7
X
6
4
E2E2-X5
Y
E2E2-X3
X
2
0
-15
-10
-5
0
5
10
15
0
−15
−10
−5
5
15
−20 −15 −10 −5
0
5
10
15 20
10
Distance Y (mm)
Distance Y (mm)
Distance Y (mm)
Unshielded Models
E2E2-X@MD@
E2E2-X@MC@/B@
E2E2-X@MY@
6
30
30
Y
X
5
25
20
15
10
5
25
E2E2-X5M
Y
4
X
20
15
E2E2-X18M
E2E2-X10M
E2E2-X20M
E2E2-X14M
3
2
1
0
10
Y
E2E2-X8M
X
5
0
0
-8
-6
-4
-2
0
2
4
6
8
−30
−20
−10
0
10
20
30
−30
−20
−10
0
10
20
30
Distance Y (mm)
Distance Y (mm)
Distance Y (mm)
Leakage Current (Typical)
E2E2-X@D@
E2E2-X@Y@
Proximity
Sensor
(when
Protective
resistance
OFF)
AC
power
supply
Supply voltage (V)
Supply voltage (V)
20
E2E/E2E2 Cylindrical Proximity Sensor
Residual Output Voltage (Typical)
E2E2-X@D@
Load current (mA)
E2E2-X@Y@
24 VAC
100 VAC
200 VAC
Residual output voltage
Residual output voltage
Residual output voltage
Proximity
Sensor
Proximity
Sensor
200 VAC
100 VAC
Proximity
Sensor
24 VAC
OFF
Residual
Residual
Residual
load
voltage
load
load
voltage
voltage
OFF
OFF
Load current (mA)
Load current (mA)
Load current (mA)
Sensing Distance vs. Sensing Object (Typical)
E2E2-X3D@
E2E2-X7D@
E2E2-X10D@
t= 1 mm
Iron
Iron
Iron
Stainless steel
(SUS304)
Stainless steel
(SUS304)
Stainless steel
(SUS304)
Brass
Brass
Brass
Aluminum
Aluminum
Copper
t= 1 mm
Aluminum
Copper
Copper
t= 1 mm
Side length of sensing
object d (mm)
Side length of sensing
object d (mm)
Side length of sensing
object d (mm)
E2E/E2E2 Cylindrical Proximity Sensor
21
E2E2-X8MD@
E2E2-X14MD@
E2E2-X20MD@
t=1 mm
t=1 mm
Iron
Iron
Stainless
steel
(SUS304)
Iron
Stainless steel
(SUS304)
Stainless steel
(SUS304)
Brass
Aluminum
Copper
Brass
Aluminum
Copper
Brass
Aluminum
Copper
t=1 mm
Side length of sensing
object d (mm)
Side length of sensing
object d (mm)
Side length of sensing
object d (mm)
E2E2-X2C@/B@
E2E2-X2Y@
E2E2-X5C@/B@
E2E2-X5Y@
E2E2-X10C@/B@
E2E2-X10Y@
t = 1 mm
Iron
Iron
Iron
Stainless steel (SUS304)
t=1 mm
Stainless steel (SUS304)
Stainless steel
(SUS304)
Brass
Brass
Brass
t=1 mm
Aluminum
Aluminum
Aluminum
Side length of sensing
object d (mm)
Side length of sensing
object d (mm)
Side length of sensing
object d (mm)
E2E2-X5MC@/B@
E2E2-X5MY@
E2E2-X10MC@/B@
E2E2-X10MY@
E2E2-X18MC@/B@
E2E2-X18MY@
t = 1 mm
t-=1 mm
Iron
Iron
Iron
Stainless steel
(SUS304)
Stainless steel (SUS304)
Brass
Stainless steel (SUS304)
Brass
Brass
t-=1 mm
Aluminum
Aluminum
Aluminum
Side length of sensing
object d (mm)
Side length of sensing
object d (mm)
Side length of sensing
object d (mm)
22
E2E/E2E2 Cylindrical Proximity Sensor
Output Circuits and Timing Charts
■ Output Circuits
E2E
E2E-X@D@ DC 2-wire Models
E2E-X@D1
E2E-X@D1-M1J-T
E2E-X@D1S
Without Diagnostic Output
No Polarity
With Diagnostic Output
4
Brown
Load
1
4
Load
Load
Brown
Proximity
sensor
main
Proximity
sensor
main
(0 V)
0 V
Load
Proximity
sensor
main
Orange (diagnostic
output)
circuit
circuit
circuit
4
3
2
Blue
0 V
Blue 3
Note: 1.The load can be connected to
0 V
Note: 1.The load can be connected to
either the +V or 0 V side.
either the +V or 0 V side.
Note: Connect both the loads to the +V
side of the control output and
diagnostic output.
2. The pin numbers in the above diagram
are for the -M@G(J). For the -M1, pin 4
is +V and pin 3 is 0 V.
2. The E2E-X@D1-M1J-T has no
polarity. Therefore, terminals 3
and 4 have no polarity.
E2E-X@D2
Without Diagnostic Output
1
Load
Brown
Proximity
sensor
main
circuit
2
Blue
0 V
Note: 1.The load can be connected to
either the +V or 0 V side.
2. The pin numbers in the above
diagram are for the -M@G.
For -M1 models, pin 2 is +V
and pin 3 is 0 V.
DC 3-wire Models
E2E-X@E@
E2E-X@F@
NPN Output
PNP Output
Brown 1
**
Brown 1
100 Ω
Proximity
sensor
main
Constant
current*
Load
Proximity
sensor
main
Black 4
circuit
(or 2)***
Black 4
(or 2)**
circuit
Load
*
100 Ω
0 V
Blue 3
Blue 3
0 V
*
Constant current output is 1.5 to 3 mA.
*
Constant current output is 1.5 to 3 mA.
** When connecting to a Tr circuit.
** Pin 4 is an NO contact, and pin 2 is an NC contact.
*** Pin 4 is an NO contact, and pin 2 is an NC contact.
E2E-C/X@C@
E2E-C/X@B@
NPN Open-collector Output
PNP Open-collector Output
Brown 1
Brown 1
Black 4
100 Ω
Load
Proximity
sensor
main
Proximity
sensor
main
Black 4
Output
circuit
circuit
Load
Blue 3
100 Ω
Blue 3
0 V
0 V
* E2E-CR6@ has no 100-Ω resistance.
* E2E-CR6@ has no 100-Ω resistance.
E2E/E2E2 Cylindrical Proximity Sensor
23
E2E-X@Y@ AC 2-wire Models
E2E-X@T1 AC/DC 2-wire Models
Brown
Brown 3 (or 1)
24 to 240 VDC
48 to 240 VAC
Load
Load
Proximity
sensor
main
Proximity
sensor
main
Power
supply
circuit
Blue
circuit
Blue 4 (or 2)
Note: The load can be connected to either
the +V or 0 V side.
Note: For connector models, the
connection between pins 3 and 4
uses an NO contact, and the
connection between pins 1 and 2
uses an NC contact.
There is no need to be concerned
about the polarity (Brown/Blue) of the
Proximity Sensor.
E2E2
E2E2-X@D@ DC 2-wire Models
Load
Brown
Proximity
sensor
main
circuit
Blue
0 V
Note: The load can be connected to either the +V or 0 V side.
E2E2-X@C@ DC 3-wire Models
E2E2-X@B@ DC 3-wire Models
Brown 1
Brown 1
+ V
+ V
100 Ω
Load
Proximity
Proximity
sensor
main
Black 4 (or 2)*
sensor
main
Black
4 (or 2)*
circuit
circuit
Load
100 Ω
Blue 3
Blue 3
0 V
0 V
* Pin 4 is an NO contact, and pin 2 is an NC contact.
* Pin 4 is an NO contact, and pin 2 is an NC contact.
E2E2-X@Y@ DC 2-wire Models
Brown 2
Load
Proximity
sensor
main
circuit
Blue 3
24
E2E/E2E2 Cylindrical Proximity Sensor
■ Timing Charts
E2E
E2E-X@D@ DC 2-wire Models
E2E-X@T1 AC/DC 2-wire Models
E2E-X@D1
E2E-X@T1
NO Models
E2E-X@D2
NC Models
Set
position
Unstable
Stable sensing
area
Non-sensing
area
sensing area
Non-sensing area
Sensing area
Proximity
Sensor
Proximity
Sensor
Sensing
object
Sensing
object
ON
Setting
indicator (green)
OFF
ON
Operation
indicator (red)
ON
Operation
indicator (red)
OFF
OFF
ON
ON
Control
output
Control
output
OFF
OFF
E2E-X@D1S
Set
position
Unstable
sensing area
Stable sensing
area
Non-sensing
area
Proximity
Sensor
Sensing
object
ON
Setting
indicator (green)
Note: The diagnostic output of the E2E-X@D1S is
ON when there is a coil burnout or the
sensing object is located in the unstable
sensing range for 0.3 s or more.
OFF
ON
Operation
indicator (red)
OFF
ON
Control
output
OFF
ON
Diagnostic
output (see note)
OFF
DC 3-wire Models
E2E-X@E@
E2E-X@F@
NPN Output
PNP Output
Sensing
object
Yes
No
ON
Sensing Yes
object
No
ON
OFF
Operation
indicator (red)
Operation
indicator (red)
OFF
ON
OFF
H
Control output
Control output
ON
OFF
ON
between brown and black lines
between black and blue lines
Output voltage
Output voltage
L
between black and blue lines
between black and blue lines
OFF
E2E-C/X@C@/B@
NPN/PNP Open-collector Output
Sensing
object
Yes
No
Operation
indicator (red)
ON
OFF
ON
OFF
Control
output
E2E/E2E2 Cylindrical Proximity Sensor
25
E2E-X@Y@ AC 2-wire Models
Sensing
object
Yes
No
Operation
indicator (red)
ON
OFF
ON
OFF
Control
output
E2E2
E2E2-X@D@ DC 2-wire Models
NO Models
NC Models
Set
position
Unstable
Stable sensing
area
Non-sensing
area
sensing area
Non-sensing area
Sensing area
Proximity
Sensor
Proximity
Sensor
Sensing
object
Sensing
object
ON
Setting
indicator (green)
OFF
ON
OFF
Operation
indicator (red)
ON
OFF
Operation
indicator (red)
ON
ON
Control
output
Control
output
OFF
OFF
E2E2-X@C@/B@ DC 3-wire Models
NPN/PNP Open-collector Output
Yes
No
Sensing object
ON
OFF
ON
Operation
indicator (red)
Control output
OFF
E2E2-X@Y@ AC 2-wire Models
Yes
No
Sensing object
ON
OFF
ON
Operation
indicator (red)
Control output
OFF
26
E2E/E2E2 Cylindrical Proximity Sensor
Installation
■ Connection
E2E
E2E-X@D@
E2E-X@D1S
E2E-X@D1-M1J-T
DC 2-wire Models
(No Polarity)
DC 2-wire Models
(Without Diagnostic Output)
DC 3-wire Models
(With Diagnostic Output)
E2E-X@Y@
E2E-X@Y@
AC 2-wire Models
AC 2-wire Models
Brown
E2E-X@T1
Load
Load
E2E-X@T1
AC/DC 2-wire Models
AC/DC 2-wire Models
Orange
Blue
Brown
Load
Brown
Blue
Load
Power
supply
Power
supply
Note: The control output and
diagnostic output share the
negative common terminal.
Therefore, the loads must be
connected to the positive
sides of the control output
and diagnostic output.
Blue
Note: There is no need to be
Brown
concerned about the polarity
(Brown/Blue) of the
Proximity Sensor.
Power
supply
Blue
Load
Note: The load can be connected
as shown above.
Connected to PC
E2E-X@D@
E2E-X@E@
DC 2-wire Models
DC 3-wire Models
Brown
Black
Brown
Blue
Blue
24 VDC
24 VDC
Connected to Relay Load
E2E-X@D@
E2E-X@E@
E2E-X@F@
DC 3-wire Models
DC 2-wire Models
DC 3-wire Models
Brown
Brown
Black
Blue
Brown
Black
Blue
24 VDC
Blue
E2E/E2E2 Cylindrical Proximity Sensor
27
E2E2
E2E2-X@D@
DC 2-wire Models
E2E2-X@Y@
AC 2-wire Models
Brown
Blue
Brown
Load
Power
supply
Power
supply
Blue
Load
Note: The load can be connected as shown in the above diagrams.
Connected to PC
E2E2-X@D@
E2E2-X@C@
DC 2-wire Models
DC 3-wire Models
Brown
Brown
Black
Blue
Blue
24 VDC
24 VDC
28
E2E/E2E2 Cylindrical Proximity Sensor
■ Pin Arrangement
E2E-X@D@-M@ DC 2-wire Models
Connector
Self-
diagnostic
output
Opera-
Applicable
models
Pin arrangement
tion
mode
M12
No
NO
E2E-X@D1-M1G@
Load
(See note.)
Load
Note: Terminals 2 and 3 are not used.
E2E-X@D1-M1J-T
Load
or
or
Load
Note: 1.Terminals 1 and 2 are not used.
2. Terminals 3 and 4 has no
polarity.
E2E-X@D1-M1
Load
Load
Note: Terminals 1 and 2 are not used.
NC
E2E-X@D2-M1G
Load
(See note.)
Load
Note: Terminals 3 and 4 are not used.
E2E-X@D2-M1
Load
Load
Note: Terminal 1 is not used.
(Self-diagnostic output)
Load
Yes
NO
NO
E2E-X@D1S-M1
E2E-X@D1-M3G
Load
Note: Terminals 1 is not used.
M8
No
Load
Load
Note: Terminals 2 and 3 are not used.
NC
E2E-X@D2-M3G
Load
Load
Note: Terminals 3 and 4 are not used.
Note: The above pin arrangements conform to IEC standards.
E2E/E2E2 Cylindrical Proximity Sensor
29
E2E-X@E/F@-M@ DC 3-wire Models
Connector
Operation mode
Applicable models
Pin arrangement
M12
NO
E2E-X@E1-M1
Load
Note: Terminal 2 is not used.
E2E-X@F1-M1
E2E-X@E2-M1
Load
Note: Terminal 2 is not used.
Note: Terminal 4 is not used.
NC
Load
E2E-X@F2-M1
Note: Terminal 4 is not used.
Note: Terminal 2 is not used.
Note: Terminal 2 is not used.
Load
M8
NO
E2E-X@E1-M3
E2E-X@F1-M3
E2E-X@E2-M3
E2E-X@F2-M3
Load
Load
NC
Note: Terminal 4 is not used.
Note: Terminal 4 is not used.
Load
Load
30
E2E/E2E2 Cylindrical Proximity Sensor
E2E-CR8C@/CR8B@/X1C@/X1B@-M5 DC 3-wire Models
Connector
Operation mode
NO/NC
Applicable models
Pin arrangement
M8-3pin
E2E-CR8C@-M5
E2E-X1C@-M5
DC
DC
4
1
3
Load
NO/NC
E2E-CR8B@-M5
E2E-X1B@-M5
4
1
3
Load
E2E-X@Y@-M1 AC 2-wire Models
Operation mode
Applicable models
Pin arrangement
NO
E2E-X@Y1-M1
Load
Load
Note: Terminals 1 and 2 are not used.
NC
E2E-X@Y2-M1
Load
Load
Note: Terminals 3 and 4 are not used.
Precautions
Refer to the following to mount the E2E-CR6, -CR8 and E2E-C1
non-screw models.
Mounting
Do not tighten the nut with excessive force. A washer must be used
with the nut.
E2E-CR6:
9 to 21 mm
E2E-CR8, -C1: 8 to 21 mm
M3 hole
No screw is provided
with the E2E-CR6,
-CR8 or E2E-C1.
Shielded Model
Unshielded Model
Tighten the screw to a torque of 0.2 N·m maximum to secure the
E2E-CR6, -CR8 and a torque of 0.4 N·m maximum to secure the
E2E-C1.
Part B Part A
Part B Part A
Note: The table below shows the tightening torques for part A and
part B nuts. In the previous examples, the nut is on the sensor
head side (part B) and hence the tightening torque for part B
applies. If this nut is in part A, the tightening torque for part A
applies instead.
Model
Part A
Part B
Length
1 N·m
Torque
Torque
M5
M8 Shielded
Unshielded
M12
9 mm
9 N·m
12 N·m
3 mm
30 N·m
70 N·m
180 N·m
M18
M30
E2E/E2E2 Cylindrical Proximity Sensor
31
Influence of Surrounding Metal
When mounting the E2E within a metal panel, ensure that the clearances given in the following table are maintained. Failure to maintain these
distances may cause deterioration in the performance of the sensor.
d dia.
Model
Shielded
Item
M8
M12
M18
M30
E2E-X@D@
l
0 mm
DC 2-wire
d
D
m
n
l
8 mm
12 mm
18 mm
30 mm
E2E-X@T1
0 mm
AC/DC 2-wire
4.5 mm
12 mm
12 mm
24 mm
12 mm
8 mm
8 mm
20 mm
27 mm
22 mm
70 mm
22 mm
40 mm
70 mm
40 mm
45 mm
30 mm
90 mm
30 mm
70 mm
90 mm
E2E2-X@D@
DC 2-wire
18 mm
15 mm
40 mm
15 mm
20 mm
40 mm
Unshielded
Shielded
d
D
m
n
l
24 mm
0 mm
E2E-X@E@
E2E-X@F@
DC 3-wire
d
D
m
n
l
8 mm
12 mm
18 mm
30 mm
0 mm
E2E-X@Y@
AC 2-wire
4.5 mm
12 mm
6 mm
8 mm
20 mm
27 mm
22 mm
55 mm
22 mm
40 mm
54 mm
40 mm
45 mm
30 mm
90 mm
30 mm
70 mm
90 mm
E2E2-X@B@
E2E2-X@C@
DC 3-wire
18 mm
15 mm
40 mm
15 mm
20 mm
36 mm
Unshielded
d
D
m
n
24 mm
6 mm
E2E2-X@Y@
AC 2-wire
8 mm
24 mm
Model
Shielded
Item
3 dia.
4 dia.
M5
5.4 dia.
5.4 mm
E2E-X@C@
E2E-X@B@
E2E-C@C@
E2E-C@B@
DC 3-wire
l
0 mm
3 mm
0 mm
2 mm
6 mm
d
D
m
n
4 mm
5 mm
2.4 mm
6 mm
3 mm
8 mm
3 mm
8 mm
32
E2E/E2E2 Cylindrical Proximity Sensor
Relationship between Sizes and Models
E2E
Model
Model No.
3 dia.
4 dia.
M5
Shielded
E2E-CR6C@
E2E-CR6B@
E2E-CR8C@
E2E-CR8B@
E2E-X1C@
E2E-X1B@
5.4 dia.
M8
E2E-C1C@
E2E-C1B@
Shielded
Unshielded
Shielded
E2E-X2D@
E2E-X1R5E@/F@
E2E-X1R5Y@
E2E-X4MD@
E2E-X2ME@/F@
E2E-X2MY@
E2E-X3D@
E2E-X2E@/F@
E2E-X2Y@
E2E-X3T1
M12
M18
M30
Unshielded
Shielded
E2E-X8MD@
E2E-X5ME@/F@
E2E-X5MY@
E2E-X7D@
E2E-X5E@/F@
E2E-X5Y@
E2E-X7T1
Unshielded
Shielded
E2E-X14MD@
E2E-X10ME@/F@
E2E-X10MY@
E2E-X10D@
E2E-X10E@/F@
E2E-X10Y@
E2E-X10T1
Unshielded
E2E-X20MD@
E2E-X18ME@/F@
E2E-X18MY@
E2E2
Model
Model No.
M12
Shielded
E2E2-X3D@
E2E2-X2C@/B@
E2E2-X2Y@
Unshielded
Shielded
E2E2-X8MD@
E2E2-X5MC@/B@
E2E2-X5MY@
M18
M30
E2E2-X7D@
E2E2-X5C@/B@
E2E2-X5Y@
Unshielded
Shielded
E2E2-X14MD@
E2E2-X10MC@/B@
E2E2-X10MY@
E2E2-X10D@
E2E2-X10C@/B@
E2E2-X10Y@
Unshielded
E2E2-X20MD@
E2E2-X18MC@/B@
E2E2-X18MY@
E2E/E2E2 Cylindrical Proximity Sensor
33
Mutual Interference
When installing two or more Sensors face to face or side by side, ensure that the minimum distances given in the following table are maintained.
B
A
Model
Shielded
Item
M8
M12
30 (20) mm
20 (12) mm
120 (60) mm
100 (50) mm
M18
50 (30) mm
35 (18) mm
200 (100) mm
110 (60) mm
M30
100 (50) mm
70 (35) mm
E2E-X@D@
A
B
A
B
20 mm
DC 2-wire
15 mm
80 mm
60 mm
E2E-X@T1
Unshielded
300 (100) mm
200 (100) mm
AC/DC 2-wire
E2E2-X@D@
DC 2-wire
E2E-X@E@
E2E-X@F@
DC 3-wire
Shielded
A
B
A
B
20 mm
15 mm
80 mm
60 mm
30 (20) mm
20 (12) mm
120 (60) mm
100 (50) mm
50 (30) mm
35 (18) mm
200 (100) mm
110 (60) mm
100 (50) mm
70 (35) mm
Unshielded
300 (100) mm
200 (100) mm
E2E-X@Y@
AC 2-wire
E2E2-X@B@
E2E2-X@C@
DC 3-wire
E2E2-X@Y@
AC 2-wire
Model
Shielded
Item
3 dia.
4 dia.
M5
5.4 dia.
E2E-X@B@
E2E-X@C@
E2E-C@B@
E2E-C@C@
DC 3-wire
A
B
20 mm
15 mm
Note: Values in parentheses apply to Sensors operating at different frequencies.
34
E2E/E2E2 Cylindrical Proximity Sensor
WARNING
This product is not designed or rated for ensuring safety
of persons.
Do not use it for such purposes.
■ Precautions for Safe Use
The colors in parentheses are previous wire colors.
Item
Examples
DC 2-wire Models
Power supply
DC 3-wire Models
Do not impose an excessive voltage on the
E2E/E2E2, otherwise it may explode or burn.
Do not impose 100 VAC on any E2E/E2E2
DC Model, otherwise it may explode or burn.
Load
Brown
Brown
Load
Sensor
Blue
Incorrect
Incorrect
Sensor
Black
Blue
Load short-circuit
DC 2-wire Models
DC 3-wire Models (NPN output)
Do not short-circuit the load, or the E2E/E2E2
may explode or burn.
The following diagram shows that the load is
short-circuited while the polarity of the supply
voltage imposed on the E2E/E2E2 is wrong,
in which case the E2E/E2E2 may explode or
Brown
Load
The E2E/E2E2’s short-circuit protection
function is valid if the polarity of the supply
voltage imposed is correct and within the
rated voltage range.
(Load
short-
Sensor
Incorrect
burn.
Load
Black
Brown
circuit)
Blue
(Load short-circuit)
Incorrect
Sensor
Blue
Wiring
DC 3-wire Models (NPN output)
Be sure to wire the E2E/E2E2 and load
correctly, otherwise it may explode or burn.
Load
Brown
Load
Brown
Sensor
Black
Sensor
Black
Blue
Incorrect
Incorrect
Blue
Connection with no load
DC 3-wire Models
AC 2-wire Models
Make sure to connect a proper load to the
E2E/E2E2 in operation, otherwise it may
explode or burn.
Load
Load
Brown
Brown
Sensor
Blue
Sensor
Blue
Incorrect
Incorrect
■ Precautions for Correct Use
Sensing Object
Metal Coating:
The sensing distances of the Proximity Sensor vary with the metal
coating on sensing objects.
Installation
Power Reset Time
The Proximity Sensor is ready to operate within 100 ms after power
is supplied. If power supplies are connected to the Proximity Sensor
and load respectively, be sure to supply power to the Proximity
Sensor before supplying power to the load.
Power OFF
The Proximity Sensor may output a pulse signal when it is turned
OFF. Therefore, it is recommended to turn OFF the load before
turning OFF the Proximity Sensor.
Power Supply Transformer
When using a DC power supply, make sure that the DC power
supply has an insulated transformer. Do not use a DC power supply
with an auto-transformer.
E2E/E2E2 Cylindrical Proximity Sensor
35
Wiring
Environment
High-tension Lines
Wiring through Metal Conduit
If there is a power or high-tension line near the cable of the Proximity
Sensor, wire the cable through an independent metal conduit to
prevent against Proximity Sensor damage or malfunctioning.
Water Resistivity
Do not use the Proximity Sensor underwater, outdoors, or in the rain.
Operating Environment
Be sure to use the Proximity Sensor within its operating ambient
temperature range and do not use the Proximity Sensor outdoors so
that its reliability and life expectancy can be maintained. Although
the Proximity Sensor is water resistive, a cover to protect the
Proximity Sensor from water or water soluble machining oil is
recommended so that its reliability and life expectancy can be
maintained.
Do not use the Proximity Sensor in an environment with chemical
gas (e.g., strong alkaline or acid gasses including nitric, chromic,
and concentrated sulfuric acid gases).
Cable Tractive Force
Do not pull on cables with tractive forces exceeding the following.
Diameter
Tractive force
30 N max.
50 N max.
4 dia. max.
4 dia. min.
Mounting
The Proximity Sensor must not be subjected to excessive shock with
a hammer when it is installed, otherwise the Proximity Sensor may
be damaged or lose its water-resistivity.
Connecting Load to AC/DC 2-wire Sensor
Refer to the following before using AC or DC 2-wire Proximity
Sensors.
P: The allowable power of the bleeder resistor. (The actual power
capacity of the bleeder resistor must be at least a few times as
large as the allowable power of the bleeder resistor.)
Surge Protection
I: Load current (mA)
Although the Proximity Sensor has a surge absorption circuit, if there
is any machine that has a large surge current (e.g., a motor or
welding machine) near the Proximity Sensor, connect a surge
absorber to the machine.
The following resistors are recommended.
100 VAC (supply voltage): A resistor with a resistance of 10 kΩ
maximum and an allowable power of 3 W minimum
200 VAC (supply voltage): A resistor with a resistance of 20 kΩ
maximum and an allowable power of 10 W minimum
If these resistors generate excessive heat, use a resistor with a
resistance of 10 kΩ maximum and an allowable power of 5 W
minimum at 100 VAC and a resistor with a resistance of 20 kΩ
maximum and an allowable power of 10 W minimum at 200 VAC
instead.
Leakage Current
When the Proximity Sensor is OFF, the Proximity Sensor has
leakage current. Refer to page 17 and page 20 Leakage Current
Characteristics. In this case, the load is imposed with a small voltage
and the load may not be reset. Before using the Proximity Sensor,
make sure that this voltage is less than the load reset voltage. The
AC 2-wire Proximity Sensor cannot be connected to any card-lift-off
relay (e.g., the G2A) because contact vibration of the relay will be
caused by the leakage current and the life of the relay will be
shortened.
DC 2-wire Models
Connect a bleeder resistor as the bypass for the leakage current so
that the current flowing into the load will be less than the load reset
current.
Load
Loads with Large Inrush Currents
(E2E-X@T@)
Bleeder resistor R
Connecting a load that has a large inrush current (e.g., a lamp or
motor) may result in a malfunction due to the inrush current causing
a load short-circuit.
Refer to the following to calculate the bleeder resistance and the
allowable power of the bleeder resistor.
R ≤ VS/(iR – iOFF) (kΩ)
P > VS2/R (mW)
Countermeasures Against Leakage Current
AC 2-wire Models
P:
iR:
The allowable power of the bleeder resistor. (The actual power
capacity of the bleeder resistor must be at least a few times as
large as the allowable power of the bleeder resistor.)
Connect a bleeder resistor as the bypass for the leakage current so
that the current flowing into the load will be less than the load reset
current.
Leakage current of Sensors (mA)
As shown in the following diagram, connect the bleeder resistor so
that the current flowing into the Proximity Sensor will be 10 mA
minimum and the residual voltage imposed on the load will be less
than the load reset voltage.
iOFF: Release current of load (mA)
The following resistors are recommended.
12 VDC (supply voltage): A resistor with a resistance of 15 kΩ
maximum and an allowable power of 450 mW minimum
24 VDC (supply voltage): A resistor with a resistance of 30 kΩ
maximum and an allowable power of 0.1 W minimum
Load
VAC power
supply VS
Bleeder resistor R
Refer to the following to calculate the bleeder resistance and the
allowable power of the bleeder resistor.
R ≤ VS/(10 – I) (kΩ)
P > VS2/R (mW)
36
E2E/E2E2 Cylindrical Proximity Sensor
Example
Connection to a PLC
In this example, the above conditions are checked for when the PLC
model is the C200H-ID212, the Proximity Sensor model is the E2E-
X7D1-N, and the power supply voltage is 24 V.
Required Conditions
Connection to a PLC is possible if the specifications of the PLC and
the Proximity Sensor satisfy the following conditions. (The meanings
of the symbols are given below.)
1. VON (14.4 V) ≤ VCC (20.4 V) – VR (3 V) = 17.4 V: OK
2. IOFF (1.3 mA) ≥ Ileak (0.8 mA): OK
1. The ON voltage of the PLC and the residual voltage of the Prox-
imity Sensor must satisfy the following.
VON ≤ VCC – VR
V
PC (4 V)]/RIN (3 kΩ)
3. ION = [VCC (20.4 V) – VR (3 V) –
≈ 4.5 mA
Therefore,
2. The OFF current of the PLC and the leakage current of the Prox-
I
OUT(min) (3 mA) ≤ ION (4.5 mA): OK
imity Sensor must satisfy the following.
VON: ON voltage of PLC (14.4 V)
I
OFF ≥ Ileak
I
I
ON: ON current of PLC (typ. 7 mA)
OFF: OFF current of PLC (1.3 mA)
(If the OFF current is not listed in the specifications, take it to be
1.3 mA.)
RIN: Input impedance of PLC (3 kΩ)
PC: Internal residual voltage of PLC (4 V)
3. The ON current of the PLC and the control output (IOUT) of the
Proximity Sensor must satisfy the following.
IOUT(min) ≤ ION ≤ IOUT(max)
V
VR: Output residual voltage of Proximity Sensor (3 V)
leak: Leakage current of Proximity Sensor (0.8 mA)
OUT: Control output of Proximity Sensor (3 to 100 mA)
CC: Power supply voltage (PLC: 20.4 to 26.4 V)
Values in parentheses are for the following PLC model and Proximity
Sensor model.
I
I
V
The ON current of the PLC will vary, however, with the power sup-
ply voltage and the input impedance used as shown in the follow-
ing equation.
I
ON = (VCC – VR – VPC )/RIN
PLC: C200H-ID212
Proximity Sensor: E2E-X7D1-N
■ Precautions for AC/DC 2-wire Proximity Sensors in Operation
Connection
Model
Connection type
Method
Correct
Description
DC 2-wire AND (serial connection)
The Sensors connected together must satisfy the
following conditions.
VS – N x VR ≥ Load operating voltage
N: No. of Sensors
VR: Residual voltage of each Sensor
VS: Supply voltage
Load
If each Proximity Sensor is not supplied with the
rated voltage and current, the indicator will not be lit
properly or unnecessary pulses may be output for
approximately 1 ms.
OR
The Sensors connected together must satisfy the
following conditions.
Correct
(parallel connection)
Load
N x i ≤ Load reset current
N: No. of Sensors
i: Leakage current of each Sensor
If the MY Relay, which operates at 24 VDC, is used
as a load for example, a maximum of four Proximity
Sensors can be connected to the load.
AC 2-wire AND (serial connection)
If 100 or 200 VAC is imposed on the Proximity
Sensors, VL (i.e., the voltage imposed on the load)
will be obtained from the following.
Incorrect
VL = VS – (residual voltage x No. of Proximity
Sensors) (V)
Therefore, if VL is lower than the load operating
voltage, the load will not operate.
Correct
A maximum of three Proximity Sensors can be
connected in series provided that the supply voltage
is 100 V minimum.
Load
Load
V
s
× 100 V
E2E/E2E2 Cylindrical Proximity Sensor
37
Model
Connection type
Method
Description
AC 2-wire OR
In principle, more than two Proximity Sensors cannot
be connected in parallel.
Incorrect
(parallel connection)
Load
Load
Provided that Proximity Sensor A does not operate
with Proximity Sensor B simultaneously and there is
no need to keep the load operating continuously, the
Proximity Sensors can be connected in parallel. In
this case, however, due to the total leakage current
of the Proximity Sensors, the load may not reset
properly.
A
B
B
Correct
It is not possible to keep the load operating
continuously with Proximity Sensors A and B in
simultaneous operation to sense sensing objects
due to the following reason.
A
VAC power
supply VS
When Proximity Sensor A is ON, the voltage
imposed on Proximity Sensor A will drop to
approximately 10 V and the load current flows into
Proximity Sensor A, and when one of the sensing
objects is close to Proximity Sensor B, Proximity
Sensor B will not operate because the voltage
imposed on Proximity Sensor B is 10 V, which is too
low. When Proximity Sensor A is OFF, the voltage
imposed on Proximity Sensor B will reach the supply
voltage and Proximity Sensor B will be ON. Then,
Proximity Sensor A as well as Proximity Sensor B
will be OFF for approximately 10 ms, which resets
the load for an instant. To prevent the instantaneous
resetting of the load, use a relay as shown on the left.
DC 3-wire AND (serial connection)
The Sensors connected together must satisfy the
following conditions.
Correct
iL + (N –1) x i ≤ Upper-limit of control output of each
Sensor
Load
VS – N x VR ≥ Load operating voltage
N: No. of Sensors
VR: Residual voltage of each Sensor
VS: Supply voltage
i: Current consumption of the Sensor
iL: Load current
If the MY Relay, which operates at 24 VDC, is used
as a load for example, a maximum of two Proximity
Sensors can be connected to the load.
38
E2E/E2E2 Cylindrical Proximity Sensor
Dimensions
Note: All units are in millimeters unless otherwise indicated.
E2E
Model
DC 2-wire
Model No.
DC 3-wire
Model No.
AC 2-wire
Model No.
AC/DC 2-wire
Figure
No.
Figure
No.
Figure Model No. Figure
No.
No.
Pre-wired Shielded
3 dia.
4 dia.
M5
---
---
E2E-CR6@
E2E-CR8@@
E2E-X1@@
E2E-C1@@
E2E-X1R5E@/F@
E2E-X2E@/F@
E2E-X5E@/F@
E2E-X10E@/F@
E2E-X2ME@/F@
E2E-X5ME@/F@ 10
E2E-X10ME@/F@ 15
E2E-X18ME@/F@ 17
1
2
4
3
5
9
---
---
---
---
5.4 dia.
M8
E2E-X2D@-N
E2E-X3D@-N
E2E-X7D@-N
E2E-X10D@-N
E2E-X4MD@
E2E-X8MD@
E2E-X14MD@
E2E-X20MD@
E2E-X2D@-M1(G)
5
E2E-X1R5Y@
E2E-X2Y@
E2E-X5Y@
E2E-X10Y@
E2E-X2MY@
E2E-X5MY@
E2E-X10MY@
E2E-X18MY@
---
7
M12
9
11
12
16
8
E2E-X3T1 12
E2E-X7T1 13
E2E-X10T1 15
M18
14
16
6
14
16
6
M30
Unshield- M8
ed
---
---
M12
M18
M30
M8
10
15
17
18
12
15
17
---
Connector Shielded
(M12)
E2E-X1R5E@-M1/ 18
F@-M1
---
---
M12
M18
M30
E2E-X3D@-M1(G)
E2E-X7D@-M1(G)
20
24
E2E-X2E@-M1
/F@-M1
E2E-X5E@-M1
/F@-M1
E2E-X10E@-M1
/F@-M1
E2E-X2ME@-M1 19
/F@-M1
E2E-X5ME@-M1 21
/F@-M1
E2E-X10ME@-M1/ 25
F@-M1
E2E-X18ME@-M1/ 27
F@-M1
20
24
26
E2E-X2Y@-M1
E2E-X5Y@-M1
22
24
E2E-X10D@-M1(G) 26
E2E-X4MD@-M1(G) 19
E2E-X8MD@-M1(G) 21
E2E-X10Y@-M1 26
--- ---
Unshield- M8
---
---
ed
M12
M18
M30
E2E-X5MY@-M1 23
E2E-X10MY@-M1 25
E2E-X18MY@-M1 27
E2E-X14MD@-
25
27
M1(G)
E2E-X20MD@-
M1(G)
Shielded
4 dia.
M5
---
---
---
---
E2E-CR8@@-M5 36
---
---
---
---
---
---
Connec-
tor (M8-3
pin)
E2E-X1@@-M5
37
Connector Shielded
(M8)
M8
E2E-X2D@-M3G
28
29
E2E-X1R5E@-M3/ 28
F@-M3
E2E-X2ME@-M3 29
/F@-M3
---
---
---
---
Unshield-
ed
E2E-X4MD@-M3G
Pre-wired Shielded
connector
M12
M18
M30
E2E-X3D1-M1GJ
E2E-X7D1-M1GJ
E2E-X10D1-M1GJ
30
32
34
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
Unshield- M12
ed
E2E-X8MD1-M1GJ 31
E2E-X14MD1-M1GJ 33
E2E-X20MD1-M1GJ 35
M18
M30
M12
M18
M30
Pre-wired Shielded
connector
(no polari-
ty)
E2E-X3D1-M1J-T
E2E-X7D1-M1J-T
30
32
E2E-X10D1-M1J-T 34
Note 1. Two clamping nuts and one toothed washer are provided with M8 to M30 Models.
2. The model numbers of Pre-wired M8 to M30 Models are laser-marked on the milled section and cable section.
E2E/E2E2 Cylindrical Proximity Sensor
39
Pre-wired Models
(Shielded)
Fig. 3: E2E-C1@@
Fig. 1: E2E-CR6@@
25
27
3
0.1 dia.
5.4 dia.
17.5
17
Operation
indicator
(red)
Operation
indicator
(red)
2.9-dia. vinyl-insulated round cable with 3 conductors
(Conductor cross section: 0.14 mm2, Insulator diameter: 0.9 mm),
Standard length: 2 m
Robotics cable Models: 2.9-dia. vinyl-insulated round cable with
3 conductors (Conductor cross section: 0.15 mm2,
Insulator diameter: 1.05 mm), Standard length: 2 m
The cable can be extended up to 100 m (separate metal conduit).
2.4-dia. (7/0.127-dia.) vinyl-insulated round cable
with 3 conductors,
Standard length: 2 m
Fig. 2: E2E-CR8@@
25
4 dia.
Fig. 4: E2E-X1@@
17.5
25
17.5
15
9.7 dia.
2.9-dia. vinyl-insulated round cable
with 3 conductors
8
(Conductor cross section: 0.14 mm2,
Insulator diameter: 0.9 mm),
Standard length: 2 m
Operation
indicator
(red)
2.9-dia. vinyl-insulated round cable with
3 conductors (Conductor cross section: 0.14 mm2,
Insulator diameter: 0.9 mm),
Operation
Robotics cable Models: 2.9-dia.
vinyl-insulated round cable with
3 conductors (Conductor cross
section: 0.15 mm2, Insulator
diameter: 1.05 mm),
Standard length: 2 m
indicator (red)
4
Robotics cable Models: 2.9-dia. vinyl-insulated
round cable with 3 conductors (Conductor cross
section: 0.15 mm2, Insulator diameter: 1.05 mm),
Standard length: 2 m
M5 × 0.5
Two clamping nuts
Toothed
washer
Standard length: 2 m
The cable can be extended up to 100 m (separate
metal conduit).
The cable can be extended up to
100 m (separate metal conduit).
Pre-wired Models
(Shielded)
Pre-wired Models
(Unshielded)
Fig. 5: E2E-X2D@-N
E2E-X1R5E@/F@
Fig. 6: E2E-X4MD@
E2E-X2ME@/F@
30
7
7
30
15 dia.
13
15 dia.
26
26
6
3
8
3
8
13
6.1 dia.
M8 × 1
Toothed
Indicator
Indicator
(See note.)
Two clamping
nuts
4-dia. vinyl-insulated round cable with
2 conductors (D Models)/3 conductors
(E, F Models)(Conductor cross section:
0.3 mm2, Insulator diameter: 1.3 mm),
Standard length: 2 m
4-dia. vinyl-insulated round cable with
2 conductors (D Models)/3 conductors (E, F
Models)(Conductor cross section: 0.3 mm2,
Insulator diameter: 1.3 mm),
(See note.)
M8 × 1
Two
clamping nuts
Toothed
washer
washer
Standard length: 2 m
Note: D Models: Operation indicator (red),
setting indicator (green);
Robotics cable Models: 4-dia.
Robotics cable models: 4-dia.
Note: D Models: Operation indicator (red),
setting indicator (green);
vinyl-insulated round cable with
2 conductors (D Models)/3 conductors
(E Models)(Conductor cross section:
0.3 mm2, Insulator diameter: 1.27 mm),
Standard length: 2 m
The cable can be extended up to 200 m
(separate metal conduit).
vinyl-insulated round cable with
2 conductors (D Models)/3 conductors (E
Models)(Conductor cross section:
0.3 mm2, Insulator diameter: 1.27 mm),
Standard length: 2 m
E, F Models: Operation indicator (red)
E, F Models: Operation indicator (red)
The cable can be extended up to 200 m
(separate metal conduit).
Fig. 7: E2E-X1R5Y@
Fig. 8: E2E-X2MY@
40
36
7
7
40
15 dia.
13
15 dia.
13
36
6
3
8
3
8
6.1 dia.
M8 × 1
Operation
Operation Indicator (red)
M8 × 1
indicator (red)
4-dia. vinyl-insulated round cable with
2 conductors (Conductor cross section:
0.3 mm2, Insulator diameter: 1.3 mm),
Standard length: 2 m
The cable can be extended up to 200 m
(separate metal conduit).
Two
4-dia. vinyl-insulated round cable with
Two
clamping nuts
clamping nuts
2 conductors (Conductor cross section:
0.3 mm2, Insulator diameter: 1.3 mm),
Standard length: 2 m
Toothed
washer
Toothed
washer
The cable can be extended up to 200 m
(separate metal conduit).
Fig. 9: E2E-X3D@-N
E2E-X2E@/F@
Fig. 10: E2E-X8MD@
E2E-X5ME@/F@
Pre-wired e-CON connector Model
Pre-wired e-CON connector Model
5.9
5.9
1
2
1
2
38
9
15
3
4
15
3
4
38
9
21 dia.
17
33
4
33
21 dia.
17
15.6
15.6
Connector:
Connector:
7
10
4
10
Product code 37104-3163-000FL
(Sumitomo 3M)
Product code 37104-3163-000FL
(Sumitomo 3M)
9 dia.
4-dia. vinyl-insulated round cable with
2 conductors (D Models)/3 conductors
(D@S, E, F Models) (Conductor cross section:
0.3 mm2, Insulator diameter: 1.3 mm),
Standard length: 2 m
Indicator
(See note.)
4-dia. vinyl-insulated round cable with
2 conductors (D Models)/3 conductors
(D@S,E, F Models) (Conductor cross section:
0.3 mm2,Insulator diameter: 1.3 mm),
Standard length: 2 m
Indicator
M12 × 1
M12 × 1
(See note.)
Two
clamping nuts
Toothed
washer
Two
clamping nuts
Toothed washer
Robotics cable models: 4-dia.
Robotics cable Models: 4-dia.
vinyl-insulated round cable with 2 conductors
(D Models)/3 conductors (E Models)
(Conductor cross section: 0.3 mm2, Insulator
diameter: 1.27 mm),
Note: D Models:
Operation indicator (red),
Note: D Models:
vinyl-insulated round cable with 2 conductors
(D Models)/3 conductors (E Models)
(Conductor cross section: 0.3 mm2, Insulator
diameter: 1.27 mm),
Operation indicator (red),
setting indicator (green);
E, F Models:
setting indicator (green);
E, F Models:
Operation indicator (red)
Standard length: 2 m
Operation indicator (red)
Standard length: 2 m
The cable can be extended (separate metal
conduit) up to 200 m (control output) or up to
100 m (diagnostic output).
The cable can be extended (separate metal conduit)
up to 200 m (control output) or up to 100 m
(diagnostic output).
40
E2E/E2E2 Cylindrical Proximity Sensor
Pre-wired Models
(Shielded)
Pre-wired Models
(Unshielded)
Fig. 11: E2E-X2Y@
Fig. 12: E2E-X5MY@
43
38
9
43
38
9
21 dia.
21 dia.
17
17
7
4
10
4
10
9 dia.
Operation indicator (red)
Operation indicator (red)
Two clamping nuts
Toothed washer
M12 × 1
M12 × 1
Two
clamping nuts
Toothed washer
4-dia. vinyl-insulated round cable
with 2 conductors (Conductors
cross section: 0.3 mm2,
Insulator diameter: 1.3 mm),
Standard length: 2 m
4-dia. vinyl-insulated round cable with
2 conductors (Conductors cross section:
0.3 mm2, Insulator diameter: 1.3 mm),
Standard length: 2 m
The cable can be extended up to 200 m
(separate metal conduit).
The cable can be extended up to
200 m (separate metal conduit).
Fig. 13: E2E-X3T1
60
55
9
21 dia.
17
4
10
Indicator (See note.)
M12 × 1
Two
4-dia. vinyl-insulated round cable with 2 conductors
(Conductors cross section: 0.3 mm2,
Insulator diameter: 1.3 mm),
clamping nuts
Toothed washer
Standard length: 2 m
The cable can be extended up to 200 m (separate metal conduit).
Note: Operation indicator (red), setting indicator
(green)
Fig. 14: E2E-X7D@-N/
E2E-X5E@/F@
Fig. 15: E2E-X14MD@/
E2E-X10ME@/F@
E2E-X10MY@
Pre-wired e-CON connector Model
Pre-wired e-CON connector Model
5.9
5.9
1
1
E2E-X5Y@/E2E-X7T1
2
2
43
12
15
3
15
3
43
38
12
29 dia.
24
38
4
4
4
15.6
15.6
29 dia.
24
10
10
Connector:
Connector:
4
10
Product code 37104-2206-000FL
(Sumitomo 3M)
Product code 37104-2206-000FL
(Sumitomo 3M)
14.8 dia.
M18 × 1
6-dia. vinyl-insulated round cable with
2 conductors (D, Y, T Models)/3
conductors (D@S, E, F Models)
(Conductor cross section: 0.5 mm2,
Insulator diameter: 1.9 mm)
Indicator
(See note.)
Two
clamping nuts
6-dia. vinyl-insulated round cable with
2 conductors (D, Y, T Models)/3 conductors
(D@S, E, F Models) (Conductor cross section:
0.5 mm2, Insulator diameter: 1.9 mm)
Standard length: 2 m
Indicator
M18 × 1
(See note.)
Two
clamping nuts
Toothed washer
Standard length: 2 m
Toothed washer
Robotics cable Models: 6-dia. vinyl-
insulated round cable with 2 conductors
(D Models)/3 conductors (E Models)
(Conductor cross section: 0.5 mm2,
Insulator diameter: 1.74 mm)
Standard length: 2 m
The cable can be extended (separate
metal conduit) up to 200 m (control
output) or up to 100 m (diagnostic
output).
Robotics cable models: 6-dia. vinyl-insulated
round cable with 2 conductors (D Models)/
3 conductors (E Models) (Conductor cross
section: 0.5 mm2, Insulator diameter: 1.74 mm)
Standard length: 2 m
The cable can be extended (separate metal
conduit) up to 200 m (control output) or up to
100 m (diagnostic output).
Note: D Models: Operation indicator (red),
setting indicator (green);
E, F, Y Models:
Note: D, T Models: Operation indicator (red),
setting indicator (green);
E, F, Y Models: Operation indicator (red)
Operation indicator (red)
Fig. 16: E2E-X10D@-N/
E2E-X10E@/F@
E2E-X10Y@/
Fig. 17: E2E-X20MD@/
E2E-X18ME@/F@
E2E-X18MY@
Pre-wired e-CON connector Model
Pre-wired e-CON connector Model
5.9
5.9
1
1
2
2
E2E-X10T1
15
3
4
15
3
48
43
12
4
15.6
15.6
12
48
42 dia.
Connector:
Product code
37104-2206-000FL
(Sumitomo 3M)
Connector:
13
42 dia.
36
43
5
10
36
Product code
37104-2206-000FL
(Sumitomo 3M)
5
10
26.8 dia.
6-dia. vinyl-insulated round cable
with 2 conductors (D, Y, T Models)/3
conductors (D@S, E, F Models)
(Conductor cross section: 0.5 mm2,
Insulator diameter: 1.9 mm),
Standard length: 2 m
Indicator
6-dia. vinyl-insulated round
M30 × 1.5
(See note.)
cable with 2 conductors (D, Y, T
Models)/3 conductors (D@S, E, F
Models) (Conductor cross section:
0.5 mm2, Insulator diameter: 1.9 mm),
Standard length: 2 m
Indicator (See note.)
M30 × 1.5
Two
clamping nuts
Two clamping nuts
Toothed washer
Toothed washer
Robotics cable Models: 6-dia. vinyl-
insulated round cable with
2 conductors (D Models)/
Note: D Models:
Robotics cable Models: 6-dia. vinyl-
insulated round cable with
Operation indicator (red),
setting indicator (green);
Note: D, T Models: Operation indicator (red),
setting indicator (green);
3 conductors (E Models) (Conductor
E, F, Y Models: Operation indicator (red)
2 conductors (D Models)/3
cross section: 0.5 mm2,
conductors (E Models)
E,F,Y Models: Operation indicator (red)
(Conductor cross section: 0.5 mm2,
Insulator diameter: 1.74 mm),
Standard length: 2 m
Insulator diameter: 1.74 mm),
Standard length: 2 m
The cable can be extended
(separate metal conduit) up to 200 m
(control output) or up to 100 m
(diagnostic output).
The cable can be extended
(separate metal conduit) up to 200 m
(control output) or up to 100 m
(diagnostic output).
E2E/E2E2 Cylindrical Proximity Sensor
41
M12 Connector Models
(Shielded)
M12 Connector Models
(Unshielded)
Fig. 18: E2E-X2D@-M1(G)
Fig. 19: E2E-X4MD@-M1(G)
E2E-X2ME@-M1/F@-M1
E2E-X1R5E@-M1/F@-M1
43
43
30
26
30
15 dia.
13
15 dia.
13
26
M12 × 1
M12 × 1
8
8
3
6
3
6.1 dia.
M8 × 1
Indicator (See note.)
Indicator (See note.)
Two clamping nuts
Toothed washer
M8 × 1
Two clamping nuts
Toothed washer
Toothed washer
Note: D Models: Operation indicator (red), setting indicator (green)
Note: D Models: Operation indicator (red), setting indicator (green)
E, F Model: Operation indicator (red)
E, F Model: Operation indicator (red)
Fig. 20: E2E-X3D@-M1(G)
E2E-X2E@-M1/F@-M1
Fig. 21: E2E-X8MD@-M1(G)
E2E-X5ME@-M1/F@-M1
48
48
33
21 dia.
17
33
21 dia.
17
M12 × 1
4
10
7
4
10
M12 × 1
9 dia.
Indicator (See note.)
Two clamping nuts
Toothed washer
Indicator (See note.)
Two clamping nuts
Toothed washer
M12 × 1
M12 × 1
Note: D Models: Operation indicator (red), setting indicator (green)
Note: D Models: Operation indicator (red), setting indicator (green)
E, F Model: Operation indicator (red)
E, F Model: Operation indicator (red)
Fig. 22: E2E-X2Y@-M1
Fig. 23: E2E-X5MY@-M1
53
53
38
21 dia.
17
38
21 dia.
17
4
10
M12 × 1
4
10
7
M12 × 1
9 dia.
Operating indicator (red)
Two clamping nuts
Operation indicator (red)
Two clamping nuts
Toothed washer
M12 × 1
M12 × 1
Toothed washer
Fig. 24: E2E-X7D@-M1(G)/E2E-X5E@-M1/F@-M1
E2E-X5Y@-M1
Fig. 25: E2E-X14MD@-M1(G)/E2E-X10ME@-M1/F@-M1
E2E-X10MY@-M1
53
53
38
38
29 dia.
24
29 dia.
4
10
4
10
10
24
M12 × 1
M12 × 1
14.8 dia.
Indicator (See note.)
Indicator (See note.)
M18 × 1
M18 × 1
Two clamping nuts
Toothed washer
Two clamping nuts
Toothed washer
Note: D Models: Operation indicator (red), setting indicator (green)
Note: D Models: Operation indicator (red), setting indicator (green)
E, F, Y Model: Operation indicator (red)
E, F, Y Model: Operation indicator (red)
Fig. 26: E2E-X10D@-M1(G)/E2E-X10E@-M1/F@-M1
E2E-X10Y@-M1
Fig. 27: E2E-X20MD@-M1(G)/E2E-X18ME@-M1/F@-M1
E2E-X18MY@-M1
58
58
43
5
43
42 dia.
36
42 dia.
36
13
10
5
10
M12 × 1
Indicator (See note).
M12 × 1
Indicator (See note.)
26.8 dia.
M30 × 1.5
M30 × 1.5
Two clamping nuts
Toothed washer
Two clamping nuts
Toothed washer
Note: D Models: Operation indicator (red), setting indicator (green)
Note: D Models: Operation indicator (red), setting indicator (green)
E, F, Y Model: Operation indicator (red)
E, F, Y Model: Operation indicator (red)
42
E2E/E2E2 Cylindrical Proximity Sensor
M8 (3 pin) Connector Models
(Shielded)
Fig. 36: E2E-CR8@@-M5
Fig. 37: E2E-X1@@-M5
35
10 dia.
25
35
25
20
19.0
8
M8, 3-pin connector
M8, 3-pin connector
4 dia.
20
M8 × 1
Two clamping
nuts
M8 × 1
Two toothed washers
M5 × 0.5
Operating indicator
Operating indicator
M8 Connector Models
(Shielded)
M8 Connector Models
(Unshielded)
Fig. 28: E2E-X2D@-M3G/E2E-X1R5E@-M3/F@-M3
Fig. 29: E2E-X4MD@-M3G/E2E-X2ME@-M3/F@-M3
39
31
39
31
15 dia.
15 dia.
26
26
M8 × 1
8
3
8
13
6
13
3
M8 × 1
6.1 dia.
M8 × 1
Indicator (See note.)
Two clamping nuts
Toothed washer
M8 × 1
Indicator (See note.)
Two clamping nuts
Toothed washer
Note:
D Models: Operation indicator (red), setting indicator (green)
E, F Model: Operation indicator (red)
Note:
D Models: Operation indicator (red), setting indicator (green)
E, F Model: Operation indicator (red)
Pre-wired M12 Connector Models
Fig. 30: E2E-X3D1-M1GJ
E2E-X3D1-M1J-T
38
33
9
21 dia.
17
4
10
M12 × 1
Operation Indicator (red),
setting indicator (green)
4-dia. vinyl-insulated round cable,
Standard length: 0.3 m
M12 × 1
Two clamping nuts
Toothed washer
Fig. 31: E2E-X8MD1-M1GJ
38
33
9
21 dia.
17
7
4
10
M12 × 1
9 dia.
Operation indicator (red),
setting indicator (green)
Two clamping nuts
4-dia. vinyl-insulated round cable,
Standard length: 0.3 m
M12 × 1
Toothed washer
Fig. 32: E2E-X7D1-M1GJ
E2E-X7D1-M1J-T
43
38
12
29 dia.
24
4
10
M12 × 1
6-dia. vinyl-insulated round cable,
Standard length: 0.3 m
Operation indicator (red),
setting indicator (green)
M18 × 1
Two clamping nuts
Toothed washer
E2E/E2E2 Cylindrical Proximity Sensor
43
Pre-wired M12 Connector Models
Fig. 33: E2E-X14MD1-M1GJ
43
38
12
4
10
29 dia.
24
10
M12 × 1
14.8 dia.
Operation indicator (red),
setting indicator (green)
6-dia. vinyl-insulated round cable,
Standard length: 0.3 m
M18 × 1
Two clamping nuts
Toothed washer
Fig. 34: E2E-X10D1-M1GJ
E2E-X10D1-M1J-T
48
43
12
42 dia.
36
5
10
M12 × 1
Operation indicator (red),
setting indicator (green)
Two clamping nuts
6-dia. vinyl-insulated round cable,
Standard length: 0.3 m
M30 × 1.5
Toothed washer
Fig. 35: E2E-X20MD1-M1GJ
48
43
12
42 dia.
36
13
5
10
M12 × 1
26.8 dia.
Operation indicator (red),
setting indicator (green)
Two clamping nuts
6-dia. vinyl-insulated round cable,
Standard length: 0.3 m
M30 × 1.5
Toothed washer
Mounting Holes
F
Dimensions
F (mm)
3 dia.
3.3+0.3/0 dia.
4 dia.
4.2+0.5/0 dia.
M5
5.5+0.5/0 dia.
5.4 dia.
5.7+0.5/0 dia.
M8
8.5+0.5/0 dia.
M12
M18
M30
12.5+0.5/0 dia. 18.5+0.5/0 dia. 30.5+0.5/0 dia.
44
E2E/E2E2 Cylindrical Proximity Sensor
E2E2
Pre-wired Models
E2E2-X3D@
E2E2-X2@@
E2E2-X8MD@
E2E2-X5M@@
60
55
9
60
55
9
21 dia.
17
21 dia.
7
4
10
17
4
10
9 dia.
Indicator (See note.)
Indicator (See note.)
Two
clamping nuts
Toothed washer
M12 × 1
M12 × 1
Two clamping nuts
Toothed washer
4-dia. vinyl-insulated round cable with
4-dia. vinyl-insulated round cable with 2
conductors (D, Y Models)/3 conductors
(B, C Models) (Conductor cross section:
0.3 mm2, Insulator diameter: 1.3 mm),
Standard length: 2 m
2 conductors (D, Y Models)/3 conductors
(B, C Models) (Conductor cross section:
0.3 mm2, Insulator diameter: 1.3 mm),
Standard length: 2 m
The cable can be extended up to 200 m
(separate metal conduit).
Note: D Models: Operation indicator (red),
setting indicator (green)
Note: D Models: Operation indicator (red),
setting indicator (green)
B, C, Y Model: Operation indicator (red)
B, C, Y Model: Operation indicator (red)
The cable can be extended up to 200 m
(separate metal conduit).
E2E2-X7D@
E2E2-X5@@
E2E2-X14MD@
E2E2-X10M@@
65
60
12
65
12
29 dia.
24
29 dia.
60
24
4
10
4
10
10
14.8 dia.
Indicator (See note.)
Two clamping nuts
Indicator (See note.)
Two clamping nuts
6-dia. vinyl-insulated round cable with
M18 × 1
M18 × 1
Toothed washer
Toothed washer
2 conductors (D, Y Models)/3 conductors
(B, C Models) (Conductor cross section:
0.5 mm2, Insulator diameter: 1.9 mm),
Standard length: 2 m
The cable can be extended up to 200 m
(separate metal conduit).
6-dia. vinyl-insulated round cable with
2 conductors (D, Y Models)/3 conductors
(B, C Models) (Conductor cross section:
0.5 mm2, Insulator diameter: 1.9 mm),
Standard length: 2 m
Note: D Models: Operation indicator (red),
setting indicator (green)
Note: D Models: Operation indicator (red),
setting indicator (green)
B, C, Y Model: Operation indicator (red)
B, C, Y Model: Operation indicator (red)
The cable can be extended up to 200 m
(separate metal conduit).
E2E2-X10D@@
E2E2-X10@@
70
12
42 dia.
36
65
5
10
Indicator (See note.)
Two clamping nuts
Toothed washer
M30 × 1.5
6-dia. vinyl-insulated round cable with
2 conductors (D, Y Models)/3 conductors
(B, C Models) (Conductor cross section:
0.5 mm2, Insulator diameter: 1.9 mm),
Standard length: 2 m
The cable can be extended up to 200 m
(separate metal conduit).
Note: D Models: Operation indicator (red),
setting indicator (green)
B, C, Y Model: Operation indicator (red)
E2E2-X20MD@
E2E2-X18M@@
70
65
12
42 dia.
36
13
5
10
26.8 dia.
Indicator
(See note.)
M30 × 1.5
Two clamping nuts
Toothed washer
6-dia. vinyl-insulated round cable with
2 conductors (D, Y Models)/3 conductors
(B, C Models) (Conductor cross section:
0.5 mm2, Insulator diameter: 1.9 mm),
Standard length: 2 m
Note: D Models: Operation indicator (red),
setting indicator (green)
The cable can be extended up to 200 m
(separate metal conduit).
B, C, Y Model: Operation indicator (red)
E2E/E2E2 Cylindrical Proximity Sensor
45
Connector Models
(Shielded)
Connector Models
(Unshielded)
E2E2-X2C@-M1/B@-M1
E2E2-X5MC@-M1/B@-M1
70
70
21.dia
17
21 dia.
17
55
55
4
10
4
M12
x 1
M12
x 1
7
10
9 dia.
Operation indicator (red)
Two clamping nuts
Toothed washer
Operation indicator (red)
Two clamping nuts
Toothed washer
M12
x 1
M12
x 1
E2E2-X2Y@-M4
E2E2-X5MY@-M4
70
70
10
55
21 dia.
17
21.dia
17
55
4
4
1/2-20unf
1/2-20unf
7
10
9 dia.
Operation indicator (red)
Two clamping nuts
Toothed washer
Operation indicator (red)
Two clamping nuts
Toothed washer
M12
x 1
M12
x 1
E2E2-X5C@-M1/B@-M1
E2E2-X10MC@-M1/B@-M1
75
60
75
60
29 dia.
24
29 dia
24
4
10
10
4
10
M12 x 1
M12
x 1
14.8 dia.
Operation indicator (red)
Two clamping nuts
Operation indicator (red)
M18
x
1
M18 x 1
Two clamping nuts
Toothed washer
Toothed washer
E2E2-X5Y@-M4
E2E2-X10MY@-M4
75
75
29 dia
24
60
29 dia.
24
60
4
10
4
10
10
1/2-20unf
1/2-20unf
14.8 dia.
Operation indicator (red)
Two clamping nuts
Toothed washer
Operation indicator (red)
Two clamping nuts
Toothed washer
M18
x 1
M18
x 1
46
E2E/E2E2 Cylindrical Proximity Sensor
Connector Models
(Shielded)
Connector Models
(Unshielded)
E2E2-X10C@-M1/B@-M1
E2E2-X18MC@-M1/B@-M1
80
80
42 dia.
36
42 dia.
36
65
65
5
10
13
10
5
M12 x 1
M12 x 1
26.8 dia.
Operation indicator (red)
Operation indicator (red)
M30 x 1.5
M30 x 1.5
Two clamping nuts
Toothed washer
Two clamping nuts
Toothed washer
E2E2-X10Y@-M4
E2E2-X18MY@-M4
80
80
42 dia.
36
65
42 dia.
36
65
5
10
13
10
5
1/2-20unf
1/2-20unf
26.8 dia.
Operation indicator (red)
Operation indicator (red)
M30 x 1.5
M30 x 1.5
Two clamping nuts
Toothed washer
Two clamping nuts
Toothed washer
Mounting Holes
F
Dimensions
M12
M18
M30
12.5+ 0.5 dia.
18.5+ 0.5 dia.
30.5+ 0.5 dia.
F (mm)
0
0
0
E2E/E2E2 Cylindrical Proximity Sensor
47
WARRANTY
OMRON’s exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if
specified) from date of sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT,
MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT
THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR
INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR
COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY,
NEGLIGENCE, OR STRICT LIABILITY.
In no event shall responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS
OMRON’S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND
NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
SUITABILITY FOR USE
THE PRODUCTS CONTAINED IN THIS DOCUMENT ARE NOT SAFETY RATED. THEY ARE NOT DESIGNED OR RATED FOR ENSURING
SAFETY OF PERSONS, AND SHOULD NOT BE RELIED UPON AS A SAFETY COMPONENT OR PROTECTIVE DEVICE FOR SUCH
PURPOSES. Please refer to separate catalogs for OMRON's safety rated products.
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the
customer’s application or use of the product.
At the customer’s request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply
to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end
product, machine, system, or other application or use.
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all
possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:
• Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document.
• Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,
safety equipment, and installations subject to separate industry or government regulations.
• Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT
THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED
AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
PERFORMANCE DATA
Performance data given in this document is provided as a guide for the user in determining suitability and does not constitute a warranty. It may
represent the result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject
to the OMRON Warranty and Limitations of Liability.
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons.
It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.
However, some specifications of the product may be changed without any notice. When in doubt, special model numbers may be assigned to fix
or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual
specifications of purchased products.
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.
ERRORS AND OMISSIONS
The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,
typographical, or proofreading errors, or omissions.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user’s programming of a programmable product, or any consequence thereof.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ELECTRONICS LLC
One Commerce Drive Schaumburg,
IL 60173-5302 U.S.A.
OMRON Corporation
Authorized Distributor:
Industrial Automation Company
Sensing Devices Division H.Q.
Industrial Sensors Division
Tel: (1) 847-843-7900/Fax: (1) 847-843-7787
Shiokoji Horikawa, Shimogyo-ku,
Kyoto, 600-8530 Japan
Tel: (81)75-344-7022/Fax: (81)75-344-7107
OMRON ASIA PACIFIC PTE. LTD.
No. 438A Alexandra Road # 05-05/08 (Lobby 2),
Alexandra Technopark, Singapore 119967
Tel: (65) 6835-3011/Fax: (65) 6835-2711
Regional Headquarters
OMRON EUROPE B.V.
Sensor Business Unit
Carl-Benz-Str. 4, D-71154 Nufringen,
Germany
Tel: (49) 7032-811-0/Fax: (49) 7032-811-199
OMRON (CHINA) CO., LTD.
Room 2211, Bank of China Tower,
200 Yin Cheng Zhong Road,
PuDong New Area, Shanghai, 200120, China
Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200
© OMRON Corporation 2008 All Rights Reserved.
In the interest of product improvement,
specifications are subject to change without notice.
Printed in Japan
0508
CSM_E2E_E2E2_DS_E_1_1
Cat. No. D058-E1
OMRON Industrial Automation Global: www.ia.omron.com
相关型号:
©2020 ICPDF网 联系我们和版权申明