E3S-2DE41 [OMRON]
Photoelectric Sensor with Built-in Amplifier;
| 型号： | E3S-2DE41 |
| 厂家： | 
OMRON ELECTRONICS LLC |
| 描述： | Photoelectric Sensor with Built-in Amplifier 传感器 换能器 |
| 文件： | 总15页 (文件大小：1874K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Photoelectric Sensor with Built-in Amplifier
E3S
CSM_E3S_DS_E_7_1
General-purpose Photoelectric
Sensor for High Quality and Reliable
Detection
Be sure to read Safety Precautions
on page 8.
Ordering Information
General-purpose Sensors
Sensing method
Appearance
Sensing distance
Operation mode
Model
E3S-2E4
Emitter E3S-2LE4
Receiver E3S-2DE4
2 m
Through-beam *1
E3S-5E4
Emitter E3S-5LE4
Receiver E3S-5DE4
5 m
Retro-reflective
Diffuse-reflective
E3S-R2E4
0.1 to 2 m
E3S-DS10E4
E3S-DS30E4
100 mm
300 mm
2 m
E3S-2E41
Emitter E3S-2LE41
Receiver E3S-2DE41
Light-ON/Dark-ON
(selectable)
Through-beam *1
E3S-5E41 (42) *2
Emitter E3S-5LE41 (42)
Receiver E3S-5DE41 (42)
5 m
Retro-reflective
Diffuse-reflective
E3S-R2E41
0.1 to 2 m
E3S-DS10E41
100 mm
E3S-DS30E41 (42) *2
300 mm
Convergent-reflective
(narrow vision field)
E3S-LS10XE4
E3S-LS20XE4
30 to 100 mm (variable)
Convergent-reflective
(wide vision field)
50 to 250 mm (variable)
Note: Sensors with open collectors and different frequencies are available.
*1. Through-beam Sensors are normally sold in sets that include both the Emitter and Receiver.
Orders for individual Emitters and Receivers are accepted.
*2. The difference between the E3S-@@
(@@@) 41 and E3S-@@ (@@@) 42 is in the lens direction when the Sensor is mounted.
For details, refer to the dimensions that are provided on page 10 for the E3S-5E41, page 11 for the E3S-DS30E41, and page 12 for the E3S-5E42 and E3S-DS30E42.
1
E3S
Ratings and Specifications
Retro-re-
flective
Sensing method
Through-beam
Diffuse-reflective
E3S-
Convergent-reflective
E3S-
DS10E4
E3S-
E3S-5E4
E3S-R2E4
E3S-
R2E41
E3S-2E4
E3S-2E41
E3S-
DS30E4S
E3S-
E3S-
Model
E3S-5E41
(42)
DS30E41
(42)
LS10XE4
LS20XE4
Item
DS10E41
32 to 122 mm
52 to ±52 mm
122 mm
(white paper
52 x 52 mm)
322 mm
Continuously Continuously
variable
Sensing distance ± m
5 m
2.1 to ± m
(white paper 122 x 122) variable
(12 x 12 mm) (52 x 75 mm)
Standard sensing Opaque: 7- Opaque: 11- Opaque: 32-
Transparent, opaque
object
mm dia. min. mm dia. min. mm dia. min.
2.5 mm max.
at 32 mm
5% max. at 52
to ±52 mm
Differential travel ---
±2% max. of setting distance
---
3 mm max. at
122 mm
Both emitter and receiver:
Directional angle
3° to 12°
3° to 12°
Light source
(wavelength)
Infrared LED
(952 nm)
RED LED
(662 nm)
Infrared LED
(952 nm)
Power supply
voltage
1± to ±4 VDC 12%, ripple (p-p): 12% max.
52 mA max.
(Emitter: ±5 mA max.,
Receiver: ±5 mA max.)
Current
consumption
42 mA max.
Control output
(solid-state out-
put)
Output current: 1.5 to 4 mA, Load current: 82 mA max. (residual voltage: ± V max.) ➜ Refer to page 4.
Response time
Operate or reset: 3 ms max. Operate or reset: 1 ms max.
With an indicator
Sensitivity
adjustment
Ambient
illumination
(Receiver side) *
Incandescent lamp: 3,222 lx max.
Sunlight: 12,222 lx max.
Ambient
temperature
Operating: −±5 to 55°C, Storage: −42 to 72°C (with no icing or condensation)
Ambient humidity Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)
Insulation
±2 MΩ min. at 522 VDC
resistance
Dielectric strength 1,222 VAC, 52/62 Hz for 1 min
Vibration
resistance
(destruction)
12 to 55 Hz, 1.5-mm double amplitude for ± hours each in X, Y, and Z directions
522 m/s± 3 times each in X, Y, and Z directions
Shock resistance
(destruction)
Degree of
protection
IEC IP65
Pre-wired cable (standard length: ± m)
Light indicator (red), Stability indicator (green)
IEC IP67
IEC IP65
IEC IP67
Connection
method
Indicators
Polybuty-
Polybuty-
Case
lene tereph- Zinc die-cast
thalate
lene tereph- Zinc die-cast
thalate
Material Lens *
Polycarbonate
Mount-
ing
Iron
Bracket
*The ambient operating illumination is the illumination that changes the output ±±2% at ±22 lx. It is not the operational limit.
2
E3S
Engineering Data (Typical)
Parallel Operating Range
E3S-2E4 (41)
E3S-5E4 (41) (42)
100
240
220
E3S-2E41
90
80
200
180
160
140
120
100
80
70
E3S-2E4
60
50
40
30
60
40
20
Parallel movement
distance Y
Parallel movement
distance Y
10
20
Distance X
Distance X
0
0.5
1
1.5
2
2.5
3
0
1
2
3
4
5
6
7
Distance X (m)
Distance X (m)
Operating Range
E3S-DS10E4 (41)
E3S-DS30E4 (41) (42)
10
7.0
(Y)
Optical axis
Optical axis
(Y)
6.0
5.0
4.0
3.0
2.0
1.0
0
8
(−Y)
Operating
Operating
position
Standard sensing object
(100 x 100 mm)
position
Operating
distance (X)
Operating
distance (X)
Standard sensing object
(50 x 50 mm)
6
4
2
0
120
20
40
60
80 100
140 160
Operating
distance
120
60
100
80
140
160
20
40
1.0
2.0
3.0
4.0
5.0
2
4
6
8
Operating
distance
X (mm)
X (mm)
6.0
7.0
10
E3S-LS10XE4
E3S-LS20XE4
3
20
Optical axis
(Y)
Optical axis
(Y)
Operating
position
15
Operating
2
1
0
1
position
Standard sensing object
(50 x 75 mm)
Operating
Standard sensing object
Operating
distance (X)
(10 x 10 mm)
distance (X)
10
3
2
1
0
1
2
3
5
Min. distance set
0
20
40
60
80
100
120 140 160
Operating
distance
50
100
150
200
250
300 350
Operating
distance
X (mm)
5
X (mm)
10
2
3
Max. distance set
Adjust the
distance: 30 mm
Adjust the
distance: 100 mm
15
20
3
E3S
Sensing Distance vs. Size of Sensing Object
E3S-DS30E4 (41) (42)
Parallel Operating Range
E3S-R2E4 (41) (42)
E3S-DS10E4 (41)
E3S-LS20XE4
500
600
100
80
The larger the sensing object,
the longer the operating distance.
500
400
300
200
400
E3S-DS30E4 (1) (2)
d
60
40
White
paper
d
300
200
Short edge
Sensing
object
E3S-DS10E4 (1)
White
paper
Long
edge
20
Parallel movement
Sensing object
distance Y
Short: Long ratio = 2:3
100
0
100
0
Distance X
50
100
150
0
50
100
150
0.4
0.8
1.2
1.6
2
2.4
2.8 3.2
Side length (one side) of sensing object d (mm)
Distance X (m)
Short edge of sensing object (mm)
Excess Gain vs. Set Distance
Load Residual Voltage Characteristics
E3S-LS10XE4
E3S-LS3RC4
100
2.0
10,000
•
•
Sensitivity adjuster at
maximum setting
Standard sensing object
(white paper)
Received light
output peak:
30 mm
50
30
5,000
3,000
The characteristics are for
when the distance where the
received light output reaches
its peak is set to 30, 50, and
100 mm using the distance
adjuster.
Received light
output peak:
50 mm
Setting
distance
1.5
1.0
0.5
Standard sensing
object
(black carbon)
10
1,000
5
3
500
300
Received light output peak:
100 mm
Operating voltage
1
100
Operating
level
0.5
0.3
50
30
0
0
20
28
36
44
52
20
50
80 100
150
200
0
20
40
60
80
100 120 140 160
Distance (mm)
Set distance (mm)
Load current (mA)
4
E3S
I/O Circuit Diagrams
Item
Power
color polarity
Opera-
tion
mode
Output circuit
Timing charts
Wire
Model
12 to 24 VDC
Brown *1
Load 1
Stability
indicator
(green)
Light
Incident light
indicator
(red)
No incident light
Brown
Blue
+
(relay)
Light
1.5 to
4 mA
Photo-
ON
OFF
ON
indicator
(red)
Black
electric
Sensor
main
Output
*2
Load 2
circuit
Light-ON
transistor
Z
OFF
Operate
Reset
H
Load 1
(e.g., relay)
Blue *1
0 V
(Between brown and black)
(Between blue and black)
0 V
0 V
+
Load 2
Z: Zener diode (Vz = 30 V)
*1: Reverse the polarity of the power supply to switch the
operating mode.
*2: Voltage output (when connecting transistor circuit)
L
E3S
Brown *1
Stability
0 V
Light
indicator
(green)
Incident light
indicator
(red)
Load 2 *2
Brown
Blue
No incident light
ON
1.5 to
4 mA
Light
indicator
(red)
Photo-
electric
Black
Sensor
main ꢀ
OFF
ON
Load 1
(relay)
Output
transistor
circuit
Dark-ON
Z
OFF
Operate
Reset
H
Load 1
(e.g., relay)
Blue *1
12 to 24 VDC
(Between blue and black)
(Between brown and black)
Z: Zener diode (Vz = 30 V)
Load 2
*1: Reverse the polarity of the power supply to switch the
operating mode.
*2: Voltage output (when connecting transistor circuit)
L
5
E3S
Connection
● With Relay Load
Through-beam Sensors
Retro-reflective Sensors
Light Interrupted and Load Operating for E3S-2E4 (41)
and -5E4 (41) (42)
Light Interrupted and Load Operating for E3S-R2E4 (41)
(42), -DS10E4(41), and -DS30E4 (41) (42)
Blue
0 V
12 to 24 V
Load
80 mA max.
Brown
Black
Pink
80 mA max.
Black
Receiver
Emitter
Load
Output
12 to
24 V
12 to
24 V
Blue
Blue
0 V
0 V
Brown
Brown
Note: The indicator will function as a light indication if the Emitter's pink wire is
connected to the Receiver's black wire as indicated by the dotted line. The
indicator will function as a power indicator if the Emitter's pink wire is
connected to the Emitter's blue wire.
● Connection with S3D2 Sensor Controller
Reverse operation is possible using the signal input switch on the S3D2.
Sensing
Through-beam
method
Reflective
Emitter
Receiver
Brown
Black
Blue
Brown
Blue
IN1
Black
Blue
Brown
IN
1
12 V
0 V
0 V
12 V
Connection
method
7
8
9
7
8
9
10 11 12
10 11 12
4
1
5
2
6
3
4
1
5
2
6
3
S3D2
S3D2
6
E3S
Adjustment Methods
● Adjusting the E3S-LS10XE4 Convergent-reflective
● Adjusting the E3S-LS20XE4 Convergent-reflective
Sensor
Sensor
Adjustment Method 1
A
Sensitivity adjustment
Use this method if the sensing object is more reflective than
the background.
E3S-LS10XE4
Distance adjustment scale
Sensing object
Distance adjuster
Distance adjuster
Background
object
*
Align the distance adjustment scale
with the groove on the Sensor.
Center
1. Attach the distance adjustment scale as shown in the figure
and set it where the * mark is equal to the sensing distance.
A
2. Turn the distance adjuster until the red spot is at point
(center of the distance adjustment scale).
1. Set the sensitivity adjuster to the center as shown in the
figure.
2. Turn the distance adjuster counterclockwise until it is fully
turned (L to S).
3. Remove the distance adjustment scale once the distance
has been adjusted. Put a sensing object in place, and then
adjust the sensitivity.
3. Position the sensing object.
4. Slowly turn the distance adjuster clockwise (S to L).
5. Eventually the LIGHT (red) indicator will light. Turning the
adjuster further will light the STABILITY (green) indicator.
Leave the distance adjuster at this level.
6. Adjust the sensitivity in this state.
Adjustment Method 2
Use this method if the background is more reflective than the
sensing object.
Sensing object
Distance adjuster
Background
object
Center
1. Set the sensitivity adjuster to the center as shown in the
figure.
2. Turn the distance adjuster clockwise until it is fully turned (S
to L).
3. Remove the sensing object.
4. Slowly turn the distance adjuster counterclockwise (L to S).
5. Eventually the LIGHT (red) indicator will light. Turning the
adjuster further will light the STABILITY (green) indicator.
6. Adjust the sensitivity in this state.
7
E3S
Safety Precautions
● Sensors with Open-collector Outputs
Sensors with Open-collector Outputs
Rated
WARNING
This product is not designed or rated for
ensuring safety of persons.
Do not use it for such purposes.
Output
protection
circuit
Output
type
Output
Switching
current
Type
current
output
transistor
Provided against
80 mA max. an increase in the
Voltage or
current
output
1.5 to
4 mA
E
NPN
(sinking)
residual output
voltage
Precautions for Correct Use
Open-
collector
output
100 mA
max.
(sinking)
Provided:
Output transistor
cutoff
Do not use the product in atmospheres or environments that
exceed product ratings.
C
B
NPN
PNP
---
---
Open-
collector
output
100 mA
max.
(sourcing)
Provided:
Output transistor
cutoff
If the sensing object has a metallic or shiny surface, the E3S-
R may not detect it properly. To avoid this situation, place the
sensing object so that it is not at right angles to the
Photoelectric Sensor.
The model numbers are as follows:
Example:
E3S-DS10E4 (E type)
E3S-DS1C4 (C type)
E3S-DS1B4 (B type)
Reflector
Sensing object
Glossy surface
10° to 20°
C4 (C41, C42) Sensors
+V
Brown *
Create an angle.
Load
(relay)
Photo-
electric
Sensor
● Attaching the E39-S Slit
Black (output)
main
• The Slit can be fitted vertically or horizontally as indicated
by the dotted line. Make sure that Slits for the Emitter and
the Receiver are fitted in the same orientation.
Z
circuit
2.2 Ω
0 V
Blue *
• Place the packing in the supporter and hook the claws on
the indentations in the Sensor head.
• If the supporter is contacting the mounting surface, insert a
spacer to separate it. (Refer to Slit Dimensions.)
• An operating position accuracy of 0.1 mm max. can be
achieved for a Through-beam Sensor without Slits.
C4 (B41, B42) Sensors
Brown *
+V
2.2 Ω
Z
Supporter
Photo-
electric
Sensor
main
Black (output)
Slit
circuit
Packing B
Load
(relay)
Sensor head
Blue *
Cut-out section
Claws
0 V
Protrusion
Z: Zener diode (Vz = 30 V)
* The operation mode depends on the wiring of the
brown and blue lines.
Packing A
Indentation
Note 1. Only C42 models with die-cast cases are available.
2. The Emitter for a Through-beam C4-type Sensor is the same as the
Emitter for an E4-type Sensor. (E.g., E3S-5LE4)
Sensor with Slits
3. When a C- or B- type Sensor experiences a load short-circuit or overload,
the output transistor will be turned OFF. Check the load conditions before
turning the power back ON.
Applicable
Photoelectric
Sensor
E3S-5E4, -5E41 (42)
E39-S1
E3S-2E4, -2E41
E39-S2
Model
Slit
width
Item
0.5 mm
1 mm
2 mm
4 mm
0.5 mm
1 mm
2 mm
Sensing
distance
230 mm 580 mm 1200 mm 2500 mm 170 mm 420 mm 820 mm
Sensing object 0.5 mm
1 mm
2 mm
4 mm
IP60
0.5 mm
1 mm
2 mm
Degree of
protection
8
E3S
● Sensors with Different Orientations
The E3S-5, E3S-DS30, and E3S-R2 that sense in different
directions can be made.
Sensing
Sensing direction
method
E3S-5E43
Receiver
Emitter
Through-
beam
E3S-5E44
Receiver
Emitter
E3S-DS30E43
E3S-R2E43
Retro-
reflective
Diffuse-
reflective
9
E3S
(Unit: mm)
Dimensions
Unless otherwise specified, the tolerance class IT16 is used for dimensions in this data sheet.
General-purpose Sensors
E3S-2E4
E3S-2E41
4-dia. vinyl-insulated round cable with 2/3 conductors
(Conductor cross section: 0.2 mm2, Insulator diameter: 1.1 mm),
Standard length: 2 m
4-dia. vinyl-insulated round cable with 2/3 conductors
(Conductor cross section: 0.2 mm2,
Insulator diameter: 1.1 mm),
Standard length: 2 m
Weight: Emitter and Receiver, 80 g each
Weight: Emitter and Receiver, 80 g each
Indicator
Sensitivity adjuster*2
(50)
Sensitivity adjuster*2
Indicator
40
(50)
40
a*1
a*1
5
32.3
18.8
5
8.3
9.9
18.8
9
11.4
Lens: 7 dia.
15.4
16
9
11.4
6 dia.
6 dia.
Lens: 7 dia.
12.8 dia.
15.4
12.8 dia.
16.7
16.7
16.7
16.7
9
9
16
4
16
4
3.2
3.2
2.7
1.2
3.2
5.5
4
1.2
3.2
4
5.5
E39-L3
9
20
30
9
20
30
Two, M3
25.1
16.2
25.1
Two, M3
*
*
1 The mounting bracket can also be used on side a.
2 Receiver only.
*
*
1 The mounting bracket can also be used on side a.
2 Receiver only.
E3S-5E4
E3S-5E41
4-dia. vinyl-insulated round cable with 2/3 conductors
(Conductor cross section: 0.2 mm2,
Insulator diameter: 1.1 mm),
Standard length: 2 m
Weight: Emitter and Receiver, 155 g each
4-dia. vinyl-insulated round cable with 2/3 conductors
(Conductor cross section: 0.2 mm2, Insulator diameter: 1.1 mm),
Standard length: 2 m
Weight: Emitter and Receiver, 165 g each
Indicator
Sensitivity adjuster*2
Sensitivity adjuster*2
Indicator
(67)
(75)
a*1
23
20
55
a*1
23
20
63
7
11
13
7
Lens: 11 dia.
Lens: 11 dia.
11
13
13 dia.
20.4
1.6
20
20
20.4
1.6
20
20
13 dia.
22.2
22.2
4.2
2.1R
5
4.2
5
2.1R
4.2
5
2.1R
2.1R
18.6
6.5
4.2
5
12
25.4
39
12
6.5
1.9
E39-L6
22
(32)
Two, M4
Two, M4
(32)
25.4
39
slotted hexagonal bolts
slotted hexagonal bolts
1.9
*
*
1 The mounting bracket can also be used on side a.
2 Receiver only.
*
*
1 The mounting bracket can also be used on side a.
2 Receiver only.
Note:Models numbers for Through-beam Sensors (E3S-@E4, E3S-@E41) are for sets that include both the Emitter and Receiver.
The model number of the Emitter is expressed by adding "L" to the set model number (example: E3S-2LE4), the model number of the Receiver, by adding "D"
(example: E3S-2DE4.) Refer to Ordering Information to confirm model numbers for Emitter and Receivers.
10
E3S
E3S-DS10E4
E3S-DS10E41
4-dia. vinyl-insulated round cable with 3 conductors
(Conductor cross section: 0.2 mm2, Insulator diameter: 1.1 mm),
Standard length: 2 m
4-dia. vinyl-insulated round cable with 3 conductors
(Conductor cross section: 0.2 mm2, Insulator diameter: 1.1 mm),
Standard length: 2 m
Weight: Approx. 80 g
Weight: Approx. 80 g
Indicator
Sensitivity adjuster
5
(50)
a*
Lens: 7 x 13
(50)
40
9
a*
Lens: 7 x 13
40
29.5
21
10.5
5
21
11.4
16
5.5
5
11
Sensitivity
adjuster
Emitter
15.4
Receiver
12.8 dia.
6 dia.
15.4
16
6 dia.12.8 dia.
16.7
16.7
16.7
9
16.7
9
4
16
4
3.2
3.2
4
1.2
Emitter
3.2
5.5
4
1.2
3.2
5.5
Indicator
Two, M3
9
20
30
Receiver
Two, M3
9
20
30
16.8
27.3
27.3
* The mounting bracket can also be used on side a.
* The mounting bracket can also be used on side a.
E3S-R2E4
E3S-R2E41
E3S-DS30E4
E3S-DS30E41
4-dia. vinyl-insulated round cable with 3 conductors
(Conductor cross section: 0.2 mm2, Insulator diameter: 1.1 mm),
Standard length: 2 m
4-dia. vinyl-insulated round cable with 3 conductors
(Conductor cross section: 0.2 mm2, Insulator diameter: 1.1 mm),
Standard length: 2 m
Weight: Approx. 165 g
Weight: Approx. 155 g
Indicator
Sensitivity adjuster
Sensitivity adjuster
7
Indicator
(75)
63
a*
23
Lens: 10 x 15
Emitter
(67)
55
a*
23
20
7
Lens: 10 x 15
11
13
7.1
20
11
13
Receiver
20.4
20
13 dia.
20.4
20
13 dia.
22.2
20
22.2
5
4.2
20
4.2
5
Emitter
2.1R
4.2
1.6
5
2.1R
4.2
1.6
5
2.1R
1.9
2.1R
1.9
12
18.6
6.5
12
22
Receiver
Two, M4
25.4
39
Two, M4
(32)
25.4
39
6.5
slotted hexagonal bolts
24.9
(32)
slotted hexagonal bolts
* The mounting bracket can also be used on side a.
* The mounting bracket can also be used on side a.
11
E3S
E3S-5E42
4-dia. vinyl-insulated round cable with 2/3 conductors
(Conductor cross section: 0.2 mm2,
Insulator diameter: 1.1 mm),
Standard length: 2 m
Weight: Approx. 165 g
Indicator
Sensitivity adjuster
Receiver
(75)
63
18.6
23
20
a*
Lens: 11 dia.
7
11
13
20.4
20
20
13 dia.
10.2
1.6
22.2
4.2
5
Indicator
(75)
Emitter
2.1R
4.2
5
63
23
20
2.1R
1.9
7
6.5
12
25.4
39
24
(32)
Two, M4
slotted hexagonal bolts
20.4
20
13 dia.
10.2
1.6
22.2
20
5
4.2
2.1R
5
4.2
Lens: 11 dia.
2.1R
18.6
6.5
12
25.4
Two, M4
slotted hexagonal bolts
* The mounting bracket can also be used on side a.
1.9
(32)
39
E3S-R2E42
E3S-DS30E42
E3S-LS10XE4
E3S-LS20XE4
4-dia. vinyl-insulated round cable with 3 conductors
(Conductor cross section: 0.2 mm2, Insulator diameter: 1.1 mm),
Standard length: 2 m
4-dia. vinyl-insulated round cable with 3 conductors
Weight: Approx. 225 g
(Conductor cross section: 0.2 mm2, Insulator diameter: 1.1 mm),
Standard length: 2 m
34
2.1R
20
Weight: Approx. 165 g
Indicator
21.5
18.6
11
Lens:
10 x 15
4.2
24
17
5
Distance adjuster
Sensitivity adjuster
11
Receiver
26
7.1
Two, M4
slotted hexagonal bolts
Emitter
Lens:
14 x 47
Sensitivity adjuster
6
Indicator
20
a*
(75)
5
23
20
63
7
11
13
Emitter
Optical axis
8 dia.
20.4
10.2
13 dia.
55
20
20
45
70
Receiver
22.2
4.9
45
4.2
2.1R
5
1.6
2.1R
4.2
5
Two,
4.4 dia.
1.6
12
25.4
39
6.5
1.9
(32)
16
Two, M4
slotted hexagonal bolts
50
* The mounting bracket can also be used on side a.
Note:Models numbers for Through-beam Sensors (E3S-5E42) are for sets that include both the Emitter and Receiver.
The model number of the Emitter is expressed by adding "L" to the set model number (example: E3S-5LE42), the model number of the Receiver, by adding "D"
(example: E3S-5DE42.) Refer to Ordering Information to confirm model numbers for Emitter and Receivers.
Mounting Hole Dimensions
E3S-2E4
E3S-2E41
E3S-DS10E4
E3S-DS10E41
E3S-LS10XE4
E3S-LS20XE4
Two, M4
25.4
E3S-5E4
E3S-5E41
E3S-R2E4
E3S-R2E41 (42)
E3S-DS30E4
E3S-DS30E41 (42)
Two, M3
20
12
E3S
Accessories (Order Separately)
Special Mounting Bracket
E39-L2
92.1
82.1
Mounting Holes
Two, M4
10.2
20.2
25.4
5
41 25.4
4.2
Applicable models:
E3S-5E41
E3S-R2E41
Two, M4 slotted
hexagonal bolts
4.2
E3S-DS30E41
5
5.6
2.1R
25
25.4
9
29.1
E39-L4
68.5
60.8
Mounting Holes
Two, M3
15.70
20
4
5
20
33
3.2
3.2
Two, M3
Applicable models:
E3S-2E41
E3S-DS10E41
4
4
20
20
28.5
Reflector
E39-R1
(Provided with the E3S-R2E4(41) Retro-reflective Reflector.)
40.3
34
Two, 3.5 dia.
7.5
7
59.9 52
Material:
Reflective surface: Acrylic
Rear surface: ABS
8
2.7
1.6
4
Sensitivity Adjuster (Provided)
E39-G1
13 dia.
9.3 dia.
Applicable models:
Provided with the E3S-5E4(41), E3S-DS30E4(41), E3S-R2E4(41).
Note: Cannot be used for the E3S-DS10E4 (41).
13
E3S
Slit (Order Separately)
E39-S2
Slit
Applicable
Sensors
E39-S2
E3S-2E4
E3S-2E41
10.5
1.8
13
1.2
17.8
Note 1. Three sets of slits are provided:
6.5 x 0.5 mm, 6.5 x 1 mm and 6.5 x
2 mm
17.9
(16.7)
2. One set consists of two slits, one
each for the Emitter and Receiver.
E39-S2
*Spacer
E39-S1
Slit
E39-S1
Applicable
Sensors
E3S-5E4
E3S-5E41
8.3
2.1
1.2
20
Note 1. Four sets of slits are provided:
11 x 0.5 mm, 11 x 1 mm, 11 x 2 mm,
and 11 x 4 mm
22.4
2. One set consists of two slits, one
each for the Emitter and Receiver.
23.4
(22.2)
E39-S2
*Spacer
Note: The dimensions in parentheses are for when the Spacer is not used.
*With the E3S-2E4 (41), use the Spacer as shown in the figure above so that the supporter
and Mounting Bracket will not be struck when the optical axis is adjusted.
With the E3S-5E4 (41), the Spacer is not particularly required. Use the Spacer, however, to directly mount both the E3S-2E4 (41) and -5E4 (41).
In the interest of product improvement, specifications are subject to change without notice.
14
Read and Understand This Catalog
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or
comments.
Warranty and Limitations of Liability
WARRANTY
OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified)
from date of sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR
FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS
DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS
IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT
LIABILITY.
In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS
OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT
SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
Application Considerations
SUITABILITY FOR USE
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's
application or use of the products.
At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the
products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,
machine, system, or other application or use.
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible
uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:
Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.
Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,
safety equipment, and installations subject to separate industry or government regulations.
Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE
SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND
INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
Disclaimers
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons.
It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.
However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or
establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual
specifications of purchased products.
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.
PERFORMANCE DATA
Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the
result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON
Warranty and Limitations of Liability.
ERRORS AND OMISSIONS
The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,
typographical, or proofreading errors, or omissions.
2011.9
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2011 All Right Reserved.
相关型号：
©2020 ICPDF网 联系我们和版权申明