E3S-CT112M [OMRON]
Oil-resistant, Long-range Photoelectric Sensor with Metal Housing; 耐油,长距离光电传感器金属外壳![E3S-CT112M](http://pdffile.icpdf.com/pdf2/p00212/img/icpdf/E3S-CT_1198314_icpdf.jpg)
型号: | E3S-CT112M |
厂家: | ![]() |
描述: | Oil-resistant, Long-range Photoelectric Sensor with Metal Housing |
文件: | 总10页 (文件大小:814K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Oil-resistant, Long-range Photoelectric Sensor with Metal Housing
E3S-C
CSM_E3S-C_DS_E_6_1
Water- and Oil-resistant
Photoelectric Sensor with
Metal Housing Used for Long-
range Sensing
• Excellent resistance against the water and oil. Easy
application in locations with oil mist.
• Long-range sensing up to 30 m with Through-beam
models.
• Shock resistance rated at 1,000m/s2.
• Product lineup includes metal M12 pre-wired
connector models.
• NPN/PNP selector switch output.
Be sure to read Safety Precautions on
page 6.
Ordering Information
Sensors (Refer to Dimensions on page 8.)
Red light
Model
Infrared light
Sensing method
Appearance
Connection method
Pre-wired
Sensing distance
E3S-CT11 2M
Emitter E3S-CT11-L 2M
Receiver E3S-CT11-D 2M
Horizontal
E3S-CT11-M1J 0.3M
Emitter E3S-CT11-L-M1J 0.3M
Receiver E3S-CT11-D-M1J 0.3M
Pre-wired Connector (M12)
Pre-wired
Through-beam
(Emitter + Receiver) *
30 m
E3S-CT61 2M
Emitter E3S-CT61-L 2M
Vertical
Receiver E3S-CT61-D 2M
E3S-CT61-M1J 0.3M
Emitter E3S-CT61-L-M1J 0.3M
Pre-wired Connector (M12)
Receiver E3S-CT61-D-M1J 0.3M
Pre-wired
E3S-CR11 2M
Horizontal
Vertical
Pre-wired Connector (M12)
Pre-wired
E3S-CR11-M1J 0.3M
E3S-CR61 2M
Retro-reflective
3 m
Pre-wired Connector (M12)
E3S-CR61-M1J 0.3M
E3S-CD11 2M
700 mm
2 m
Pre-wired
E3S-CD12 2M
Horizontal
Vertical
E3S-CD11-M1J 0.3M
E3S-CD12-M1J 0.3M
E3S-CD61 2M
700 mm
2 m
Pre-wired Connector (M12)
Pre-wired
Diffuse-reflective
700 mm
2 m
E3S-CD62 2M
E3S-CD61-M1J 0.3M
E3S-CD62-M1J 0.3M
700 mm
2 m
Pre-wired Connector (M12)
* Through-beam Sensors are normally sold in sets that include both the Emitter and Receiver.
Orders for individual Emitters and Receivers are accepted.
1
E3S-C
Accessories (Order Separately)
Slits (A Slit is not provided with Through-beam Sensors. Order a Slit separately if required.) (Refer to Dimensions on page 10.)
Minimum detect-
Sensing
distance
Slit width
able object
(typical)
Model
Quantity
Remarks
0.5 mm × 11 mm
1 mm × 11 mm
2 mm × 11 mm
4 mm × 11 mm
1.8 m
3.5 m
7 m
0.5-mm dia.
1-mm dia.
2-mm dia.
2.6-mm dia.
1 set each for
Emitter and Re-
ceiver
(Snap-in Long Slit)
Can be used with the E3S-CT@1(-M1J)
Through-beam Sensor. Refer to page 10.
E39-S61
(8 Slits total)
15 m
Reflectors (Reflector required for Retroreflective Sensors)
A Reflector is provided with the E39-R1 Sensor. For other Sensors, order a reflector separately if required. (Refer to Dimensions on E39-L/F39-L/E39-S/E39-R.)
Name
Reflectors
Sensing distance (typical)
3 m (rated value)
4 m
Model
E39-R1
Quantity
Remarks
1
1
1
1
1
1
1
Provided with the E3S-CR@1 (-M1J) Retro-reflective Sensor.
E39-R2
E39-R3
E39-R4
E39-RS1
E39-RS2
E39-RS3
---
---
---
1.5 m
Small Reflectors
Tape Reflectors
750 mm
700 mm (50 mm)*
1,100 mm (100 mm)*
1,400 mm (100 mm)*
Enables MSR function.
Note: 1. When using any reflector other than the provided one, use a sensing distance of approximately 0.7 times the typical value as a guide.
2. Refer to Reflectors on E39-L/F39-L/E39-S/E39-R for details.
* Values in parentheses indicate the minimum distance required between the Sensor and Reflector.
Mounting Brackets
Some Mounting Brackets are provided with the Sensor. Order other Mounting Brackets separately if required. (Refer to Dimensions on E39-L/F39-L/E39-S/E39-R.)
Appearance
Model
Quantity
Remarks
E39-L102
1
Provided with Horizontal Models.
E39-L103
1
Provided with Vertical Models.
Mounting bracket for changing from E3S-
@@@@@42/44 to E3S-C Vertical Models.
E39-L85
E39-L86
1
1
Mounting bracket for changing from E3S-
@@@@@43 to E3S-C Vertical Models.
E39-L87
1
---
Note: 1. When using a Through-beam Sensor, order one Connector for the Receiver and one for the Emitter.
2. Refer to Mounting Brackets on E39-L/F39-L/E39-S/E39-R for details.
Sensor I/O Connectors
(Models with Pre-wired Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.) (Refer to Dimensions on XS2.)
Cable
Appearance
Straight
Cable type
Model
XS2F-D421-DC0-A
2 m
5 m
2 m
5 m
XS2F-D421-GC0-A
XS2F-D422-DC0-A
XS2F-D422-GC0-A
Standard
3-wire
L-shape
Note: 1. When using a Through-beam Sensor, order one Connector for the Receiver and one for the Emitter.
2. For details on Sensor I/O Connectors and cables such as vibration-proof robot cables, refer to Introduction to Sensor I/O Connectors.
2
E3S-C
Ratings and Specifications
Sensing
Retro-reflective
Through-beam
method
Diffuse reflective
Horizontal Horizontal
(with M.S.R. function) *1
Horizontal
E3S-CT11(-M1J)
Horizontal
E3S-CR11(-M1J)
E3S-CD11(-M1J)
E3S-CD12(-M1J)
Model
Vertical
E3S-CT61(-M1J)
Vertical
E3S-CR61(-M1J)
Vertical
Vertical
E3S-CD62(-M1J)
Item
E3S-CD61(-M1J)
700 mm
(300 × 300 mm
white paper)
2 m
Sensing distance
30 m
3 m (when using E39-R1)
(300 × 300 mm
white paper)
Standard sensing
object
Opaque, 15-mm dia. min.
Opaque, 75-mm dia. min.
---
Differential travel
---
20% max. of sensing distance
---
Emitter and Receiver: 3°
to15°
Directional angle
3° to 10°
Light source
(wavelength)
Infrared LED (880 nm)
Red LED (700 nm)
Infrared LED (880 nm)
Power supply voltage 10 to 30 VDC including 10% (p.p) ripple
50 mA max. (Emitter 25 mA
max. Receiver 25 mA max.)
Current consumption
Control output
40 mA max.
Load power supply voltage: 30 VDC max.
Load current: 100 mA max. (Residual voltage: NPN output: 1.2 V max., PNP output: 2.0 V max.)
Open controller output (NPN/PNP selectable)
Light-ON/Dark-ON selectable
Power supply reverse polari-
ty circuit protection, Output
short-circuit protection
Power supply reverse polarity protection, Output short-circuit protection,
Mutual interference prevention
Protection circuits
Response time
Operate or reset: 1 ms max.
Operate or reset 2 ms max.
Two-turn endless adjuster with an indicator
Sensitivity
adjustment
One-turn adjuster
Ambient illumination Incandescent lamp: 5,000 lx max.
(Receiver side)
Sunlight: 10,000 lx max.
Ambient temperature
range
Operating: −25°C to 55°C, Storage: −40°C to 70°C (with no icing or condensation)
Ambient humidity
range
Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)
Insulation resistance 20 MΩ min. (at 500 VDC)
Dielectric strength
Vibration resistance
Shock resistance
1,000 VAC, 50/60 Hz for 1 min
Destruction: 10 to 2,000 Hz, 1.5-mm double amplitude or 300 m/s2 for 0.5 hours each in X, Y, and Z directions
Destruction: 1,000 m/s2 3 times each in X, Y, and Z directions
Degree of protection
Connection method
IEC 60529: IP67 (in-house standards: oil-resistant), NEMA: 6P (indoors only) *2
Pre-wired (standard cable length: 2 m) or Pre-wired M12 Connector (standard cable length: 0.3 m)
Approx. 270 g
(Pre-wired cable)
Approx. 230 g
Approx. 160 g
(Pre-wired cable)
Approx. 130 g
Approx. 150 g
(Pre-wired cable)
Approx. 110 g
Weight (packed state)
(Pre-wired Connector (M12)) (Pre-wired Connector (M12)) (Pre-wired Connector (M12))
Case
Zinc die-cast
Operation
PES (polyether sulfone)
Methacrylic resin
panel cover
Material
Lens
Mounting
Bracket
Stainless steel (SUS304)
Mounting Bracket (with screws), Adjustment screwdriver, Instruction manual, and Reflector (only for Retro-reflective
Sensors)
Accessories
*1. Refer to MSR function of Technical Guide (Technical version).
*2. NEMA: National Electrical Manufactures Association
3
E3S-C
Engineering Data (Typical)
Parallel Operating Range
Through-beam
Through-beam
Retro-reflective
E3S-CT@ (-M1J)
E3S-CT@ (-M1J) + E39-S61 Slit
E3S-CR@1 (-M1J)+E39-R1 Reflector
(Order Separately)
(Provided)
2.5
080
400
E39-R1 Reflector
Slit witdh: 4 mm
Y
2
Y
060
300
Slit witdh: 2 mm
1.5
X
X
400
200
Slit witdh: 1 mm
1
Y
200
100
0
0.5
X
0
0
10
20
30
40
4
8
12
16
1
2
3
4
Distance X(m)
Distance X(m)
−0.5
−1
−1.5
−200
−400
−100
−200
Distance X(m)
Slit iwdth: 05. mm
−060
−080
−300
−400
−2
−2.5
Operating Range
Diffuse-reflective
E3S-CD@@ (-M1J)
50
Sensing object: white paper
Y
300 × 300 mm
E3S-CD@2
40
30
X
E3S-CD@1
20
10
0
1
2
3
Distance X (m)
−10
−20
−30
−40
−50
Excess Gain vs. Set Distance
Through-beam
Retro-reflective
Diffuse-reflective
E3S-CT@1 (-M1J)
E3S-CR@1 (-M1J) + E39-R1 Reflector
E3S-CD@@ (-M1J)
(Provided)
500
500
300
500
Sensing object: White paper 300 × 300 mm
E3S-CD@1
Reflector: E39-R1
300
300
100
100
100
50
30
50
30
50
30
E3S-CD@2
10
10
10
5
3
5
3
5
3
Operating
Operating1
level
1
Operating1
level
level
0
1
2
3
0
10
20
30
40
0
1
2
3
4
Distance (m)
Distance (m)
Distance (m)
4
E3S-C
I/O Circuit Diagrams
NPN Output
Operation
Operation
selector
Model
mode
Timing charts
Output circuits
Incident light
Through-beam Model Receivers: Retro-reflective Models, Reflective Models
No incident light
ON
OFF
ON
Light indicator
(Red)
Brown
Black
Blue
Light
10 to 30 VDC
Stability
indicator
(Green)
1
4
3
indicator
PNP output
transistor
L side
(LIGHT ON)
(Red)
ZD
ZD
Load
Light-ON
Output
transistor
Load
current
Control output
0 V
OFF
Photo-
electric
Sensor
main
NPN or PNP
output selector
Operate
Reset
Load
(e.g. relay)
*
circuit
(Between brown
and black leads)
NPN output
transistor
E3S-CT11(-M1J) *
E3S-CT61(-M1J) *
Incident light
No incident light
* Set the NPN or PNP selector to NPN.
ON
E3S-CR11(-M1J)
E3S-CR61(-M1J)
Dark-ON
E3S-CD11(-M1J)
E3S-CD12(-M1J)
E3S-CD61(-M1J)
E3S-CD62(-M1J)
Light indicator
(Red)
OFF
ON
Connector Pin Arrangement
D side
(DARK ON)
Output
transistor
OFF
1
2
4
Operate
Reset
Load
(e.g. relay)
3
(Between brown
and black leads)
Pin 2 is not used.
Through-beam Model Emitters
Brown
Power
indicator
(Red)
Connector Pin Arrangement
1
3
1
Photo-
electric
Sensor
main
10 to 30 VDC
2
4
3
circuit
Blue
Note: Pins 2 and 4 are not used.
PNP Output
Model
Operation
mode
Operation
selector
Timing charts
Output circuits
Incident light
Through-beam Model Receivers: Retro-reflective Models, Reflective Models
No incident light
ON
OFF
ON
Light indicator
(Red)
Brown
10 to 30 VDC
Light
indicator
(Red)
Stability
indicator
(Green)
1
4
3
L side
(LIGHT ON)
PNP output
transistor
Output
transistor
ZD
ZD
Light-ON
OFF
Photo-
*
electric
Sensor
main
Operate
Reset
Black
Load
(e.g. relay)
NPN or PNP
output selector
Control output
circuit
Load
current
(Between blue
and black leads)
Load
NPN output
transistor
E3S-CT11(-M1J) *
E3S-CT61(-M1J) *
Blue
0 V
Incident light
No incident light
* Set the NPN or PNP selector to NPN.
E3S-CR11(-M1J)
E3S-CR61(-M1J)
ON
Light indicator
(Red)
OFF
Connector Pin Arrangement
D side
(DARK ON)
ON
Dark-ON
Output
transistor
1
OFF
E3S-CD11(-M1J)
E3S-CD12(-M1J)
E3S-CD61(-M1J)
E3S-CD62(-M1J)
2
4
Operate
Reset
Load
(e.g. relay)
3
(Between blue
and black leads)
Pin 2 is not used.
Through-beam Model Emitters
Brown
Power
indicator
Connector Pin Arrangement
1
(Red)
1
Photo-
electric
Sensor
main
10 to 30 VDC
2
4
3
circuit
Blue
3
Note: Pins 2 and 4 are not used.
* Models numbers for Through-beam Sensors (E3S-CT@1(-M1J)) are for sets that include both the Emitter and Receiver.
The model number of the Emitter is expressed by adding "-L" to the set model number (example: E3S-CT11-L 2M), the model number of the Receiver, by adding "-D"
ޓ
(example: E3S-CT11-D 2M.) Refer to Ordering Information to confirm model numbers for Emitter and Receivers.
Plug (Sensor I/O Connector)
Refer to Introduction
Clas-
Terminal No.
Connector
pin No.
to Sensor I/O
connectors for
details.
sifica- Conductor
tion
Application
1
2
3
4
Brown
2
4
Blue
Black
1
3
Brown
1
2
3
4
Power supply (+V)
---
---
DC
Blue
Power supply (0 V)
Output
XS2F-D421-DC0-A
Black
Note: Pin 2 is not used.
5
E3S-C
Nomenclature
Horizontal Model
Vertical Model
Operation panel
cover
Operation panel
cover
Light indicator
(red)
Stability indicator
(green)
SENS
Stability
indicator
(green)
S
L
Light
indicator
(red)
D
ON
PNP
S
L
Output selector *1
Sensitivity
adjuster
Min
Max
NPN
L
ON
Min
Max
Sensitivity
adjuster
SENS
PNP
Operation
selector *2
D·ON
Operation
selector *2
Output selector *1
NPN
L·ON
E3S-CD12
Note: The sensitivity adjuster on Through-beam and Retro-reflective Models is
different.
Model number
*1. Use the output selector to select the type of output transistor, NPN or PNP.
*2. Use the operation selector to select the operation mode.
Safety Precautions
Refer to Warranty and Limitations of Liability.
WARNING
This product is not designed or rated for ensuring
safety of persons either directly or indirectly.
Do not use it for such purposes.
Mounting Bracket
• When mounting the E3S-C with the mounting bracket so that
sensing objects will be in the direction of the mechanical axis, use
the optical axis lock holes.
• If it is not possible to mount the E3S-C so that the sensing objects
will be in the direction the mechanical axis, move the E3S-C
upwards, downwards, to the left, or to the right and secure the E3S-
C in the center of the range where the light indicator will be lit, at
which time make sure that the stability indicator is lit.
Direct Mounting
Precautions for Correct Use
Do not use the product in atmospheres or environments that exceed
product ratings.
● Designing
Mount the E3S-C as shown in the following illustration.
Mounting with M4 Screws
Fuzzy Mutual Interference Prevention Function
If Reflective Sensors are installed side by side, each Sensor may be
influenced by the light emitted from the other Sensors.
Two, 4.5 dia.
through holes
The fuzzy mutual interference prevention function of the E3S-C
enables the E3S-C to monitor any light interference for a certain
period before the E3S-C starts emitting light so that the E3S-C can
retrieve the intensity and frequency of the light interference as data.
Using this data, the E3S-C estimates with fuzzy inference the risk of
the malfunctioning of the E3S-C and controls the timing of the E3S-
C’s light emission.
M4
M4 hole
M4 hole
Mounting with M3 Screws
When the risk is low:
The E3S-C waits until there is no light interference and emits light.
Two, M3
Light
interference
Emission
pattern
M4 hole
When the risk is high:
The E3S-C emits light between each period of light interference.
M4 hole
Light
interference
M3
Optical Axis Adjustment
Emission
pattern
Optical Lock Holes
By inserting screws into the
optical axis lock holes, the
Mounting Bracket will be in the
● Wiring
Cable
Optical
axis
• The E3S-C uses an oil-resistive cable to ensure oil resistivity.
• Do not allow the cable to be bent to a radius of less than 25 mm.
direction of the optical axis of the
E3S-C.
oFur optical
axis lock
holes (M4)
Mounting axis
● Mounting
Mounting
• When mounting the E3S-C, do not hit the E3S-C with a hammer, or
the E3S-C will loose watertightness.
• Use M4 screws to mount the E3S-C. The tightening torque of each
screw must be 1.18 N·m maximum.
6
E3S-C
● Adjusting
● Others
Optical Axis of Through-beam Sensor
Oil and Chemical Resistance
The E3S-C Through-beam Models incorporates two lenses, one of
which will be used as shown in the following illustration. When using
a Slit, the Slit must be on the side where the lens to be used is located.
• Although the E3S-C is oil-resistance, refer to the following table
before using the E3S-C in places where oil may be sprayed on the
E3S-C.
Horizontal Model
Vertical Model
• Tests were carried out with the following oils and it was certified that
the E3S-C resists these oils.
Lens in use.
Lens in use. The Slit
must be on this side.
Kinematic viscosity
Oil
Product name
Velocite No.3
PH
(mm2/s (cst)) at 40°C
Lubricating oil
2.02
---
Water insoluble
machining oil
Yushiron Oil No. 2 ac
Less than 10
---
Yushiroken EC50T-3
Yushiron Lubic HWC68
Griton 1700D
7 to 9.5
7 to 9.9
7 to 9.2
7 to 9.8
Unused lens
Water soluble
machining oil
Unused lens
Yushiroken S50N
Water Resistance
Note: 1. The E3S-C maintained a minimum insulation resistance of 100 MΩ
after the E3S-C was dipped in all the above oils at a temperature of
50°C for 240 hours.
To ensure the water resistance of the E3S-C, tighten the screws of the
operation panel cover to a torque of 0.34 N·m to 0.54 N·m.
2. When using the E3S-C in a place where an oil other than the ones
listed above is sprayed on the E3S-C, refer to the above kinematic
viscosity and ph values. The location may be suitable for the E3S-C if
the kinematic viscosity and pH values of the oil are close to the above
kinematic viscosity and pH values, but make sure that the oil does not
contain any additive that may have a negative influence on the E3S-C.
7
E3S-C
(Unit: mm)
Dimensions
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
Sensors
Through-beam (Horizontal)
E3S-CT11(-M1J)
Pre-wired Connector (-M1J)
M12 × 1
4-dia. vinyl-insulated round cable
Standard length: 300 mm
With Mounting Bracket Attached
4-dia. vinyl-insulated round cable with 3 conductors
(Conductor cross section: 0.2 mm2 (AWG 24),
Insulator diameter: 1.2 mm),
M3 × 5
50
Light indicator (red)
*2
18.5
Standard length: 2 m *3
20 20.4
Mounting Holes
Two, M4
22.2
Stability
indicator
(green)
Emitter: E3S-CT@@-L
Receiver: E3S-CT@@-D
20
4.2
9.2
25.4
4.2
38.2
8.3
Stainless steel
(SUS304)
6.2
Lens (17 × 11)
Optical axis
2.2
4
23
29.5
18
17.3
9.3
A *
1
Two, M4
20.8
25.4
1.5
*1. The Mounting Bracket can be attached to side A.
*2. The Emitters for Through-beam Sensors only have the power indicator (red).
*3. The Emitter cable is 4-dia.vinyl-insulated round cable with 2 conductors (conductor cross section: 0.3 mm ,
insulator diameter: 1.3 mm) and a standard length of 2 m.
2
Note: Models numbers for Through-beam Sensors (E3S-CT11(-M1J)) are for sets that include both the Emitter and Receiver.
The model number of the Emitter is expressed by adding "-L" to the set model number (example: E3S-CT11-L 2M), the model number of the Receiver, by adding "-D"
ޓ
(example: E3S-CT11-D 2M.) Refer to Ordering Information to confirm model numbers for Emitter and Receivers.
8
E3S-C
Through-beam (Vertical)
E3S-CT61(-M1J)
Pre-wired Connector (-M1J)
M12 × 1
4-dia. vinyl-insulated round cable
Standard length: 300 mm
With Mounting Bracket Attached
4-dia. vinyl-insulated round cable with 3 conductors
(Conductor cross section: 0.2 mm2 (AWG24),
Insulator diameter: 1.2 mm),
57
Optical axis
15.8
7.4
Standard length: 2 m *3
Optical axis
20 20.4
Mounting Holes
22.2
Two, M4
Lens (17 × 11)
20
4.2 9.2
25.4
4.2
4.2
12.9
Stainless steel
(SUS304)
12.9
25.4
31
43.8
Stability indicator (green)
7.2
Light indicator (red)*2
5.8
20.2
2.2
23
A *
32.2
12
1
Two, M4
M3 × 5
23.2
1.5
*1. The Mounting Bracket can be attached to side A.
*2. The Emitters for Through-beam Sensors only have the power indicator (red).
*3. The Emitter cable is 4-dia.vinyl-insulated round cable with 2 conductors (conductor cross section: 0.3 mm ,
insulator diameter: 1.3 mm) and a standard length of 2 m.
2
Retro-/Diffuse-reflective (Horizontal)
E3S-CR11(-M1J)
E3S-CD11(-M1J)
Pre-wired Connector (-M1J)
M12 × 1
4-dia. vinyl-insulated round cable
Standard length: 300 mm
With Mounting Bracket Attached
E3S-CD12(-M1J)
4-dia. vinyl-insulated round cable with 3 conductors
(Conductor cross section: 0.2 mm2 (AWG24),
Insulator diameter: 1.2 mm),
M3 × 5
50
Light indicator (red)
18.5
Standard length: 2 m
20 20.4
22.2
Stability indicator
(green)
Mounting Holes
Two, M4
20
4.2
9.2
25.4
4.2
38.2
8.3
Stainless steel
(SUS304)
6.2
Lens (17 × 11)
Receiver
2.2
4
23
9
29.5
1
18
17.3
9.3
A *
Optical axis
Emitter
20.8
25.4
Two, M4
1.5
*The Mounting Bracket can be attached to side A.
Note: Models numbers for Through-beam Sensors (E3S-CT61(-M1J)) are for sets that include both the Emitter and Receiver.
The model number of the Emitter is expressed by adding "-L" to the set model number (example: E3S-CT61-L 2M), the model number of the Receiver, by adding "-D"
ޓ
(example: E3S-CT61-D 2M.) Refer to Ordering Information to confirm model numbers for Emitter and Receivers.
9
E3S-C
Retro-/Diffuse-reflective (Vertical)
E3S-CR61(-M1J)
E3S-CD61(-M1J)
Pre-wired Connector (-M1J)
M12 × 1
4-dia. vinyl-insulated round cable
Standard length: 300 mm
With Mounting Bracket Attached
E3S-CD62(-M1J)
57
2.4
4-dia. vinyl-insulated round cable with 3 conductors
(Conductor cross section: 0.2 mm2 (AWG24),
Insulator diameter: 1.2 mm),
9
Receiver
20.8
5
Emitter
Standard length: 2 m
Optical axis
20 20.4
Mounting Holes
22.2
Two, M4
Lens (17 × 11)
20
4.2 9.2
25.4
4.2
4.2
12.9
Stainless steel
(SUS304)
12.9
25.4
31
Stability indicator (green)
43.8
7.2
Light indicator (red)
2.2
5.8
20.2
23
A *
32.2
12
1
Two, M4
M3 × 5
23.2
1.5
*The Mounting Bracket can be attached to side A.
Accessories (Order Separately)
Snap-in Long Slit (For Through-beam Models)
E39-S61
1
A
0.2
11
20
6.2 11.8
Dimension
A (mm)
Material
Quantity
0.5
1
3.8
6.5
1 set each for
Emitter/Receiver
(8 Slits total)
Stainless
steel
2
20.1
4
Reflectors
Refer to E39-L/F39-L/E39-S/E39-R for details.
Mounting Brackets
Refer to E39-L/F39-L/E39-S/E39-R for details.
10
相关型号:
©2020 ICPDF网 联系我们和版权申明