E3T-SL132M [OMRON]
Photoelectric Sensor with Built-in Amplifier (Ultracompact and Thin Type); 光电传感器放大器内置型(超小型和超薄型)型号: | E3T-SL132M |
厂家: | OMRON ELECTRONICS LLC |
描述: | Photoelectric Sensor with Built-in Amplifier (Ultracompact and Thin Type) |
文件: | 总21页 (文件大小:2338K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Photoelectric Sensor with Built-in Amplifier (Ultracompact and Thin Type)
E3T
CSM_E3T_DS_E_9_1
New Retro-reflective Sensors
Added to the Series. Further
Contributions to Equipment
Downsizing.
• Coaxial Retro-reflective for reliable positioning applications.
• Series now includes BGS* reflective model with black/white error
of 15%
• Easy optical axis adjustment with emitter axis accuracy of 2°
(Through-beam Model)
• Noise and external light resistance enhanced to that of E3Z or
equivalent
• Output reverse polarity protection provides reliable support
against incorrect wiring.
• The Series includes models with M12 Smartclick pre-wired
connectors (-M1TJ)
* BGS (Background Suppression) technology prevents detecting background objects.
Be sure to read Safety Precautions on
page 14.
Features
E3T-SR4@
: Retro-reflective Sensor with Enhanced
Compactness and High Performance
• Perform detection from a small hole.
With a coaxial optical system, the lens diameter is only 2 mm.
Sufficient incident light is obtained even through a small hole.
The Coaxial Retro-reflective Sensor can be used for reliable application with positioning.
• Improved Stability of Short-distance Detection
A detection distance as short as 10 mm can be used with a Tape Reflector.
Detection is stable through a hole whether the distance is 10 mm or 100 mm (except in combination with the
E39-R4).
E3T-FL1@/-FL2@: The Slimmest BGS (Background Suppression) Reflective Photoelectric
Sensors in the World
Ultra slim at 3.5 mm and
black/white error of only
15%.
Dramatic Improvement in Black/White Error
20mm
Not detected
15mm
(mm)25
Rated sensing distance
For example, the E3T-
FL1@ can stably detect a
black object at 12 mm
without being affected by a
white background at
20 mm.
OMRON provides BGS
performance sharper than
the previous Convergent-
reflective Sensors.
20
15
10
5
12mm
Detected
Black
object
0
White
background
White paper Black paper White paper Black paper
3.5mm
E3T-FL1
(BGS Reflective Model)
E3T-SL1
(Convergent-reflective Model)
E3T-FL1
1
E3T
Ordering Information
Red light
Sensors (Refer to Dimensions on page 15.)
Model
Sensing
Connection
method
Sensing
distance
Operation
mode
Appearance
method
NPN output
PNP output
1 m
Light-ON
Dark-ON
E3T-ST11 2M
E3T-ST13 2M
Side-view
(Sensitivity Adjustment
Unit can be used.)
E3T-ST12 2M
E3T-ST14 2M
Light-ON
Dark-ON
E3T-ST21 2M
E3T-ST22 2M
E3T-FT11 2M
E3T-ST23 2M
E3T-ST24 2M
E3T-FT13 2M
300 mm
500 mm
Through-beam
(Emitter +
Receiver) *2
Light-ON
Dark-ON
Light-ON
Dark-ON
Flat
E3T-FT12 2M
E3T-FT21 2M
E3T-FT22 2M
E3T-FT14 2M
E3T-FT23 2M
E3T-FT24 2M
300 mm
Using the E39-R4 Reflector
provided
Side-view
Light-ON
Dark-ON
E3T-SR41 2M *4 E3T-SR43 2M *4
E3T-SR42 2M *4 E3T-SR44 2M *4
200 mm [30 mm] *1
Retro-
reflective *3
Using the E39-R37-CA
100 mm [10 mm] *1
Pre-wired (2 m)
Flat
Light-ON
Dark-ON
E3T-FD11 2M
E3T-FD12 2M
E3T-FD13 2M
E3T-FD14 2M
Diffuse-
reflective
5 to 30 mm
Light-ON
Dark-ON
Light-ON
Dark-ON
Light-ON
Dark-ON
Light-ON
Dark-ON
E3T-SL11 2M
E3T-SL12 2M
E3T-SL21 2M
E3T-SL22 2M
E3T-FL11 2M
E3T-FL12 2M
E3T-FL21 2M
E3T-FL22 2M
E3T-SL13 2M
E3T-SL14 2M
E3T-SL23 2M
E3T-SL24 2M
E3T-FL13 2M
E3T-FL14 2M
E3T-FL23 2M
E3T-FL24 2M
Side-view
5 to 15 mm
5 to 30 mm
1 to 15 mm
1 to 30 mm
Convergent-
reflective
Flat
BGS
reflective
*1. Values in parentheses indicate the minimum required distance between the Sensor and Reflector.
*2. The model number of the Emitter is expressed by adding an "L" to the set model number in the table. Example: E3T-ST11-L 2M
The model number of the receiver is expressed by adding a "D" to the set model number in the table. Example: E3T-ST11-D 2M
Orders for individual Emitters and Receivers are accepted. (Modifications are required for some models.)
*3. Ask your OMRON representative about the previous Retro-reflective Sensors: E3T-SR2@ and E3T-SR3@.
*4. Models are available either with or without the E39-R37-CA Reflector included.
Model with E39-R37-CA Reflector: E3T-SR4@-S
Model without Reflector: E3T-SR4@-C
2
E3T
Variety of Connection Specifications
The models with the connection specifications marked with a black circle in the table are available. The model number indication is a combination
of the basic model and the connection specification.
Example: E3T-ST11-M1TJ 0.3M
Connection
specification
Basic model
number
NPN Output
Model
number
example
E3T-ST11-M1TJ
E3T-ST11-ECON
0.3M
E3T-ST11-ECON
2M
Model
E3T-ST11 5M
E3T-ST11R 2M
0.3M
M12 pre-wired
Smartclick Con-
nector (cable
Connec-
tion speci-
fication
e-CON pre-wired
connector (cable
length: 0.3 m)
e-CON pre-wired
connector (cable
length: 2 m)
Pre-wired (cable
length: 5 m)
Pre-wired robot
(cable length: 2 m)
Sensing
method
Sensing Operation
length: 0.3 m)
distance
mode
Basic
model
-M1TJ 0.3M
5M
R 2M
-ECON 0.3M
-ECON 2M
number
Light-ON E3T-ST11
Dark-ON E3T-ST12
Light-ON E3T-ST21
Dark-ON E3T-ST22
Light-ON E3T-FT11
Dark-ON E3T-FT12
Light-ON E3T-FT21
Dark-ON E3T-FT22
Light-ON E3T-SR41
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
---
---
●
●
●
●
●
●
●
●
---
---
---
---
●
●
---
---
●
●
---
---
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
---
---
●
---
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
---
---
---
---
1 m
Through-
beam (side-
view)
300 mm
500 mm
300 mm
Through-
beam (flat)
Retro-
reflective
200 mm
(100 mm)
Dark-ON
Light-ON E3T-FD11
Dark-ON E3T-FD12
Light-ON E3T-SL11
Dark-ON E3T-SL12
Light-ON E3T-SL21
Dark-ON E3T-SL22
Light-ON E3T-FL11
Dark-ON E3T-FL12
Light-ON E3T-FL21
Dark-ON E3T-FL22
E3T-SR42
Diffuse-
reflective
5 to
30 mm
5 to
15 mm
Convergent-
reflective
5 to
30 mm
1 to
15 mm
BGS reflec-
tive
1 to
30 mm
* The sensing distance depends on the Reflector that is used. The sensing distance is 200 mm if an E39-R4 is used and 100 mm if an E39-R37-CA is used.
PNP Output
Model
number
example
E3T-ST13-M1TJ
Model
E3T-ST13 5M
E3T-ST13R 2M
0.3M
M12 pre-wired
Smartclick Con-
nector (cable
Connec-
tion speci-
fication
Pre-wired (cable
length: 5 m)
Pre-wired robot
(cable length: 2 m)
Sensing
method
Sensing Operation
length: 0.3 m)
distance
mode
Basic
model
-M1TJ 0.3M
5M
R 2M
number
Light-ON E3T-ST13
Dark-ON E3T-ST14
Light-ON E3T-ST23
Dark-ON E3T-ST24
Light-ON E3T-FT13
Dark-ON E3T-FT14
Light-ON E3T-FT23
Dark-ON E3T-FT24
●
●
●
●
●
●
●
●
●
●
●
●
1 m
Through-
beam (side-
view)
---
---
●
---
---
●
300 mm
500 mm
300 mm
●
●
Through-
beam (flat)
---
●
---
---
3
E3T
Model
number
example
E3T-ST13-M1TJ
0.3M
Model
E3T-ST13 5M
E3T-ST13R 2M
M12 pre-wired
Smartclick Con-
nector (cable
Connec-
tion speci-
fication
Pre-wired (cable
length: 5 m)
Pre-wired robot
(cable length: 2 m)
Sensing
method
Sensing Operation
length: 0.3 m)
distance
mode
Basic
model
-M1TJ 0.3M
5M
R 2M
number
Light-ON E3T-SR43
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Retro-
reflective
200 mm
(100 mm)
Dark-ON
Light-ON E3T-FD13
Dark-ON E3T-FD14
Light-ON E3T-SL13
Dark-ON E3T-SL14
Light-ON E3T-SL23
Dark-ON E3T-SL24
Light-ON E3T-FL13
Dark-ON E3T-FL14
Light-ON E3T-FL23
Dark-ON E3T-FL24
E3T-SR44
●
Diffuse-
reflective
5 to
30 mm
●
●
5 to
15 mm
●
Convergent-
reflective
●
5 to
30 mm
●
---
---
---
---
1 to
15 mm
BGS reflec-
tive
1 to
30 mm
* The sensing distance depends on the Reflector that is used. The sensing distance is 200 mm if an E39-R4 is used and 100 mm if an E39-R37-CA is used.
4
E3T
Accessories (Order Separately)
Slits (Refer to Dimensions on page 18.)
Sensing distance
Slit width
Minimum detectable
object (typical)
Model
Quantity
Remarks
(typical) (Sensor model)
100 mm (E3T-ST1@)
0.5-mm dia.
0.5-mm dia.
1-mm dia.
0.5-mm dia.
1-mm dia.
Plug-in type round slits
Can be used with E3T-ST@@
Through-beam Models.
30 mm (E3T-ST2@)
E39-S63
300 mm (E3T-ST1@)
1-mm dia.
One each for Emitter and
Receiver; common with Slit
widths of 1 dia. and 0.5 dia.
(total of 2)
100 mm (E3T-ST2@)
50 mm (E3T-FT1@)
0.5-mm dia.
Plug-in type round slits
Can be used with E3T-FT@@
Through-beam Models.
30 mm (E3T-FT2@)
E39-S64
100 mm (E3T-FT1@)
1-mm dia.
50 mm (E3T-FT2@)
Reflectors (For Small Reflectors, refer to Dimensions on page 17. For Tape Reflectors , refer to E39-L/F39-L/E39-S/E39-R.)
Recommended
Sensor
E3T-SR4@
Minimum
Name
Small
Sensing distance
Model
E39-R4
Quantity
Remarks
detectable object
200 mm (30 mm) *1
100 mm (10 mm) *1
Provided with the E3T-SR4@
Provided with the E3T-SR4@-S
Reflectors
E3T-SR4@-S
E39-R37-CA *2
E39-RS1-CA *2
E39-RS2-CA *2
E39-RS3-CA *2
2-mm dia.
1
Use Tape Reflectors in combina-
tion with the E3T-SR4@-C, which
does not come with a Reflector.
Tape
Reflectors
E3T-SR4@-C
100 mm (10 mm) *1
*1. Values in parentheses indicate the minimum required distance between the Sensor and Reflector.
*2. The E3T-SR4@ cannot be used with the E39-R37 or E39-RS1/2/3 (without CA) Tape Reflectors.
The E39-@-CA Reflector is for use only with the E3T-SR4@. It cannot be used with other Sensors.
Sensitivity Adjustment Unit (Refer to Dimensions on page
Mounting Brackets (Refer to Dimensions on page 18.)
18.)
Appearance
Model
Quantity
Remarks
Sensing
Appearance distance Model Quantity
(typical)
Remarks
E39-L116
Can be used with the
E3T-S@@@ Side-view
Models. (A securing nut
plate is provided with the
Mounting Bracket.)
Can be used with
the E3T-ST1@
Through-beam
Models.
E39-L117
E39-L118
E39-L119
E39-L120
300 to
800 mm
E39-E10
1
1
Can be used with the
E3T-F@@@ Flat Models.
Note: When using Through-beam models, order one bracket for the
Receiver and one for the Emitter.
Set of Mounting Screws
Applicable sensors
Model
Description
Material
Quantity
Remarks
Phillips screws (M2 × 14)
Hexagonal nuts (M2)
Spring washers (M2)
Flat washers (M2)
Iron, zinc plating
Iron, zinc plating
Iron, nickel plating
Iron, zinc plating
Provided with the
side-view models
E3T-S@@@.
Side-view models
E3T-S@@@
E39-L164
2 for each
Phillips screws (M2 × 8)
Hexagonal nuts (M2)
Spring washers (M2)
Flat washers (M2)
Iron, zinc plating
Iron, zinc plating
Iron, nickel plating
Iron, zinc plating
Flat models
E3T-F@@@
Provided with the flat
models E3T-F@@@.
E39-L165
Note: If a Through-beam Model is used, order two sets of Mounting Screws, one for the Emitter and one for the Receiver.
Used for mounting sensors. Order the set separately if it becomes lost or damaged.
These screws are not used for mounting brackets to the equipment.
5
E3T
Sensor I/O Connectors (For M12, refer to XS5. For e-CON, contact your OMRON representative.)
Size
Cable
Appearance
Cable type
Model
M12
(For -M1TJ
models)
2 m
XS5F-D421-D80-A
XS5F-D421-G80-A
E39-ECON2M
Straight
Standard
4-wire
4-wire
5 m
2 m
Connector on one end
Connector on both ends
5 m
E39-ECON5M
e-CON
Standard cable
0.5 to 1 m
1.1 to 1.5 m
1.6 to 2 m
E39-ECONW@M
Replace @ with the cable length in
0.1-m increments.
Note: When using Through-beam models, order one connector for the Receiver and one for the Emitter.
Ratings and Specifications
Retro-reflective (without M.S.R.
function)
Through-beam
Side-view
Flat
Side-view
NPN
PNP
NPN
PNP
NPN
PNP
Sensing method
Sensing distance
E3T-ST11
E3T-ST12
E3T-ST21
E3T-ST22
E3T-ST13
E3T-ST14
E3T-ST23
E3T-ST24
E3T-FT11
E3T-FT12
E3T-FT21
E3T-FT22
E3T-FT13
E3T-FT14
E3T-FT23
E3T-FT24
E3T-SR41
E3T-SR42
E3T-SR43
E3T-SR44
E3T-SR4@
200 mm (30 mm) (Using the E39-R4)
100 mm (10 mm) (Using the E39-R37-CA)
E3T-ST1@
E3T-ST2@
1 m
300 mm
E3T-FT1@
E3T-FT2@
500 mm
300 mm
Standard sensing object Opaque, 2-mm dia. min.
Opaque, 1.3-mm dia. min.
1.3-mm dia opaque object
Opaque, 27-mm dia. min.
Minimum detectable
2-mm dia opaque object
object (typical)
2-mm dia.
(sensing distance of 100 mm)
Hysteresis (white paper) ---
Black/white error
Directional angle
---
Emitter: 2° to 20°, Receiver: 2° to 70° Emitter: 3° to 25°, Receiver: 3° min. 2° to 20°
Light source (wavelength) Red LED (“Pin-point” LED) λ = 650 nm
Power supply voltage
Current consumption
12 to 24 VDC 10%, ripple (p-p) 10% max.
30 mA max. (Emitter 10 mA max., Receiver 20 mA max.)
Load power supply voltage: 26.4 VDC max.
20 mA max.
Load current: 50 mA max. (residual voltage: 2 V max. for load current of 10 to 50 mA, 1 V max. for load current of less than 10 mA)
Open-collector output
Control output
Light ON: E3T-@@@1 and E3T-@@@3
Dark ON: E3T-@@@2 and E3T-@@@4
Power supply and control output re-
verse polarity protection
Output short-circuit protection, Mutual
interference prevention
Power supply and control output reverse polarity protection
Output short-circuit protection
Protection circuits
Response time
Operate or reset: 1 ms max.
Ambient illumination
Incandescent lamp: 5,000 lx max.,
Sunlight: 10,000 lx max.
Storage: −40 to 70°C (with no icing or condensation)
Storage: 35% to 95% (with no condensation)
Ambient temperature range Operating: −25 to 55°C
Ambient humidity range Operating: 35% to 85%
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
Degree of protection
Connection method
Weight
20 MΩ min. at 500 VDC
1,000 VAC, 50/60 Hz for 1 min
Destruction: 10 to 2,000 Hz, 1.5-mm double amplitude or 300 m/s2 for 0.5 hrs each in X, Y, and Z directions
Destruction: 1,000 m/s2 3 times each in X, Y, and Z directions
IP67 (IEC60529)
Pre-wired (standard length: 2 m)
Approx. 40 g
Approx. 20 g
Case
PBT (polybutylene terephthalate)
Materials Display window Denatured polyarylate
Lens Denatured polyarylate
Methacrylic resin
Instruction manual, Installation Phillips screws (Side-view Models: M2 × 14, Flat Models: M2 × 8), Nuts, Spring
washers, Flat washers, E39-R4 (E3T-SR4@ only), E39-R37-CA (E3T-SR4@-S only)
Accessories
*Values in parentheses indicate the minimum required distance between the Sensor and Reflector.
6
E3T
Diffuse-reflective
Flat
Convergent-reflective
Side-view
BGS reflective
Flat
NPN
PNP
NPN
PNP
NPN
PNP
NPN
PNP
NPN
PNP
Sensing method
Sensing distance
E3T-FD11 E3T-FD13 E3T-SL11 E3T-SL13 E3T-SL21 E3T-SL23 E3T-FL11 E3T-FL13 E3T-FL21 E3T-FL23
E3T-FD12 E3T-FD14 E3T-SL12 E3T-SL14 E3T-SL22 E3T-SL24 E3T-FL12 E3T-FL14 E3T-FL22 E3T-FL24
5 to 30 mm
(50 × 50 mm white
paper)
5 to 15 mm
(50 × 50 mm white
paper)
5 to 30 mm
(50 × 50 mm white
paper)
1 to 15mm
(50 × 50 mm white
paper)
1 to 30mm
(50 × 50 mm white
paper)
Standard sensing object ---
Minimum detectable
object (typical)
0.15-mm dia non-glossy object
(sensing distance of 10 mm)
0.15-mm dia. (sensing distance of 10 mm)
Hysteresis (white paper) 6 mm max.
2 mm max.
6 mm max.
0.5 mm max.
15% max.
2 mm max.
Black/white error
---
Directional angle
---
Light source (wavelength) Red LED (“Pin-point” LED) λ = 650 nm
Power supply voltage
Current consumption
12 to 24 VDC 10%, ripple (p-p) 10% max.
20 mA max.
Load power supply voltage: 26.4 VDC max.
Load current: 50 mA max. (residual voltage: 2 V max. for load current of 10 to 50 mA, 1 V max. for load current of less than 10 mA)
Open-collector output
Control output
Light ON: E3T-@@@1 and E3T-@@@3
Dark ON: E3T-@@@2 and E3T-@@@4
Power supply and control output reverse polarity protection
Output short-circuit protection, Mutual interference prevention
Protection circuits
Response time
Operate or reset: 1 ms max.
Ambient illumination
Incandescent lamp: 5,000 lx max.
Sunlight: 10,000 lx max.
Ambient temperature range Operating: −25 to 55°C
Ambient humidity range Operating: 35% to 85%
Storage: −40 to 70°C (with no icing or condensation)
Storage: 35% to 95% (with no condensation)
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
Degree of protection
Connection method
Weight
20 MΩ min. at 500 VDC
1,000 VAC, 50/60 Hz for 1 min
Destruction: 10 to 2,000 Hz, 1.5-mm double amplitude or 300 m/s2 for 0.5 hrs each in X, Y, and Z directions
Destruction: 1,000 m/s2 3 times each in X, Y, and Z directions
IP67 (IEC60529)
Pre-wired (standard length: 2 m)
Approx. 20 g
Case
PBT (polybutylene terephthalate)
Materials Display window Denatured polyarylate
Lens
Denatured polyarylate
Instruction manual, Installation Phillips screws (Side-view Models: M2 × 14, Flat Models: M2 × 8), Nuts, Spring
washers, Flat washers
Accessories
7
E3T
Engineering Data (Typical)
Parallel Operating Range
Through-beam
E3T-ST1@ + E39-S63 Slit
(Order Separately)
E3T-ST1@ + E39-S63 Slit
(Order Separately) (Enlarged graph)
E3T-ST2@
200
80
25
X
X
Y
20
150
60
40
Without Slit
Y
Without Slit
15
10
5
X
Y
100
1-dia Slit
1-dia Slit
0.5-dia Slit
0.5-dia Slit
1-dia Slit
50
0
20
0.5-dia Slit
200
0
0
−5
0.4
0.8
1.2
1.6
2.0
400
600
800
Distance X (m)
Distance X (mm)
−50
− 20
− 40
40
80
120
160
200
Distance X (mm)
−10
−15
−100
−150
−200
− 60
− 80
−20
−25
E3T-FT1@ + E39-S64 Slit
(Order Separately)
E3T-FT1@ + E39-S64 Slit
(Order Separately) (Enlarged graph)
E3T-FT2@
80
60
200
150
80
X
Y
X
1-dia Slit
60
40
Y
Without Slit
1-dia Slit
40
20
100
X
Y
0.5-dia Slit
0.5-dia Slit
50
0
20
0.5-dia Slit
400
0
0
200
600
0.2
0.4
0.6
0.8
1
1.2
1.4
40
80
120
160
200
800
Distance X (mm)
Without Slit
Distance X (m)
Distance X
(mm)
−20
−40
−50
−100
−20
−40
1-dia Slit
−60
−80
−150
−200
−60
−80
Retro-reflective
40
X
30
Y
20
E3T-SR4@+E39-R4
10
0
−10
100
200
300
400
Distance X (mm)
E3T-SR4@+E39-R37-CA
−20
−30
−40
8
E3T
Operating Range
Diffuse-reflective
E3T-FD1@
Convergent-reflective
E3T-SL1@
E3T-SL2@
15
4
4
Sensing object:
50 x 50 mm white paper
Sensing object:
X
X
Sensing object:
50 x 50 mm white paper
X
50 x 50 mm white paper
3
3
2
Y
Y
Y
10
5
2
1
1
0
0
0
10
20
30
40
−1
−2
−1
Distance X (mm)
10
20
30
40
−5
5
10
15
20
25
30
Distance X
(mm)
Distance X (mm)
−2
−10
−15
−3
−4
−3
−4
BGS Reflective
E3T-FL1@
E3T-FL2@
10
8
5
4
6
4
2
3
Sensing object:
50 x 50 mm white paper
X
Sensing object:
50 x 50 mm white paper
2
1
X
Y
Y
0
0
5
10
15
20
25
30
35
2
4
6
8
10
12
14
16
Sensing distance X (mm)
Sensing distance X (mm)
−2
−4
−6
−1
−2
−3
−8
−4
−5
−10
Inclination Detection Area Characteristic
Convergent-reflective
E3T-SL1@ (Top to Bottom)
20
E3T-SL1@ (Right to Left)
E3T-SL2@ (Top to Bottom)
20
40
Stainless steel
Stainless steel
Glass
30
Glass
10
10
20
Stainless steel
Angle of
inclination
Glass
+θ −θ
10
0
Angle of
inclination
Angle of
inclination
+θ −θ
+θ −θ
0
−10
0
0
10
Angle θ (°)
−10
0
10
−10
0
10
Angle θ (°)
Angle θ (°)
9
E3T
BGS Reflective
E3T-SL2@ (Right to Left)
E3T-FL1@ (Top to Bottom)
E3T-FL1@ (Right to Left)
20
20
40
Angle of
inclination
Angle of
inclination
Stainless steel
+θ
−θ
+θ
−θ
White paper
White paper
Center
line
30
Center
line
10
10
20
10
0
Angle of
+θ −θ
inclination
Glass
Glass
Stainless steel
Glass
Stainless steel
0
0
−10
0
10
−10
0
10
Angle θ (°)
−10
0
10
Angle θ (°)
Angle θ (°)
E3T-FL2@ (Top to Bottom)
E3T-FL2@ (Right to Left)
40
40
Angle of
inclination
Angle of
inclination
+θ
−θ
White paper
30
+θ
−θ
30
Center
line
White
paper
Center
line
20
20
Glass
Glass
10
0
10
Stainless steel
Stainless steel
0
−10
0
10
Angle θ (°)
−10
0
10
Angle θ (°)
Excess Gain vs. Set Distance
Through-beam
E3T-ST1@
100
E3T-FT1@
E3T-ST2@
100
14
50
30
50
30
12
10
8
10
10
5
3
5
3
6
Operating
level
Operating
level
1
1
4
0.5
0.3
0.5
0.3
2
Operating
level
1
0
0.1
0.1
0
300
600
900
1200
0
400
800
1200
1600
2000
0
1000
2000
3000
4000
Set distance (mm)
Set distance (mm)
Set distance (mm)
10
E3T
Retro-reflective
Diffuse-reflective
E3T-FD1@
100
E3T-FT2@
E3T-SR2@ + E39-R4 (Provided)
14
100
50
30
50
30
12
10
8
E3T-SR4@+E39-R4
10
10
White paper
5
3
5
3
6
Operating
level
E3T-SR4@+E39-R37-CA
Operating
level
1
1
4
0.5
0.5
0.3
0.3
0.1
2
Black paper
20
1
0
Operating
level
0.1
0
500
1000
1500
2000
0
10
30
40
0
100
200
300
Set distance (mm)
Set distance (mm)
Set distance (mm)
Convergent-reflective
E3T-SL1@
E3T-SL2@
1000
500
300
100
50
30
100
50
30
10
White paper
5
3
White paper
10
5
3
Operating
level
1
Operating 1
0.5
level
0.5
0.3
Black paper
0.3
0.1
Black paper
10
0.1
0
5
15
20
0
10
20
30
40
Set distance (mm)
Set distance (mm)
Sensing Object Size vs. Sensing Distance
E3T-SL1@
E3T-FD1@, E3T-SL2@
2.0
10
Sensing object: Pin-gauge, stainless steel
1.6
1.2
0.8
0.4
0
8
6
E3T-FD1@
4
2
E3T-SL2@
5
10
15
20
0
5
10
15
20
25
30
Set distance (mm)
Set distance (mm)
11
E3T
Sensing Distance vs. Material
Convergent-reflective
Diffuse-reflective
E3T-SL1@
E3T-SL2@
E3T-FD1@
70
50
25
60
50
40
30
20
40
30
20
20
15
10
10
0
5
0
10
0
Material
Material
Material
BGS Reflective
E3T-FL1@
E3T-FL2@
20
40
15
30
10
5
20
10
0
0
Material
Material
Sensing Distance Characteristics of Sensitivity Adjustment Unit
(when Completing Optical Axis Adjustment)
E3T-ST1@ + E39-E10 Sensitivity Adjust-
ment Unit (Order Separately)
3.5
3.0
2.5
2.0
Measurement pattern 2
1.5
1.0
Measurement pattern 1
0.5
0
Min.
1/3
1/2
2/3
Max.
Adjustment dial angle
12
E3T
I/O Circuit Diagrams
NPN Output
Model
Operation mode
Timing charts
Output circuit
Through-beam Receivers,
Retroreflective and Reflective Models
Light incident
12 to 24 VDC
Brown
Light interrupted
1
Stability
indicator
(green)
Operation
indicator
(orange)
Operation indicator ON
Load
(relay)
(orange)
OFF
50 mA
max.
(Control output) Black
E3T-@@@1
Light-ON
Output
ON
OFF
Photo-
4
transistor
electric
Sensor
Main
ZD
Load
Operate
Reset
Blue
(e.g., relay)
3
Circuit
0 V
(Between brown (1)
and black (4) leads)
Connector Pin Arrangement
Through-beam Emitters
M12
e-CON
Light incident
1
2
Brown
Blue
Light interrupted
1
3
1
Operation indicator ON
Photo-
electric
Sensor
Main
(orange)
OFF
2
4
12 to 24 VDC
3
E3T-@@@2
Dark-ON
Output
ON
OFF
Circuit
3
4
transistor
Load
Operate
Reset
(e.g., relay)
Note:Pin 2 is not used.
(Between brown (1)
and black (4) leads)
Pins 2 and 4 are not used
with Through-beam Emitters.
PNP Output
Model
Operation mode
Timing charts
Output circuit
Through-beam Receivers,
Retroreflective and Reflective Models
Light incident
12 to 24 VDC
Brown
Light interrupted
1
Operation
indicator
(orange)
Stability
indicator
(green)
Operation indicator ON
(orange)
OFF
ZD
Black
Photo-
Output
ON
E3T-@@@3
Light-ON
4
electric
Sensor
Main
OFF
transistor
Load
(relay)
50 mA
max.
(Control output)
Blue
Load
(e.g., relay)
Operate
Reset
3
Circuit
0 V
(Between blue (3)
and black (4) leads)
Connector Pin Arrangement
Through-beam Emitters
M12
e-CON
Light incident
Brown
1
2
Light interrupted
1
3
Operation indicator ON
Photo-
electric
Sensor
Main
1
(orange)
OFF
2
4
12 to 24 VDC
E3T-@@@4
Dark-ON
Output
ON
OFF
3
transistor
Circuit
3
4
Blue
Load
Operate
Reset
(e.g., relay)
Note:Pin 2 is not used.
(Between blue (3)
and black (4) leads)
Pins 2 and 4 are not used
with Through-beam Emitters.
Plugs (Sensor I/O Connectors)
M12 Connector
Wire color
1
2
3
4
2
Brown
White
Blue
1
3
Black
4
XS5F-D421-D80-A
XS5F-D421-G80-A
e-CON connector
Pin arrangement
Classification Wire color Connector pin No.
Application
Power supply (+V)
---
15.8
Brown
White
Blue
1
2
3
4
E39-ECON@M
DC
Power supply (0 V)
Output
Black
E39-ECONW@M
Note: Pin 2 is not used.
13
E3T
Safety Precautions
Refer to Warranty and Limitations of Liability.
● Adjusting
WARNING
Indicators
This product is not designed or rated for ensuring
safety of persons. Do not use it for such purpose.
• The following graphs indicate the status of each operating level.
• Be sure to use the E3T within the stable operating range.
Stability
indicator
(green)
Operation indicator (orange)
E3T-@@@1
E3T-@@@3
E3T-@@@2
E3T-@@@4
Do not apply AC power to the E3T, otherwise the E3T
may rupture.
Stable
ON
operation
range*
ON
OFF
ON
Operating
level x 1.2
Unstable
operation
range*
Precautions for Correct Use
Do not use the product in atmospheres or environments that exceed
product ratings.
OFF
Operating
level
Operating
level x 0.8
Stable
operation
range*
OFF
ON
● Wiring
The maximum power supply voltage is 24 VDC +10%. Before turning
the power ON, make sure that the power supply voltage is not more
than maximum voltage.
*If the E3T fs operating level is set to the stable operation range, the E3T
will be in most reliable operation without being influenced by temperature
change, voltage fluctuation, dust, or setting change. If the operating level
cannot be set to the stable operation range, pay attention to environmen-
tal changes while operating the E3T.
Load short-circuit protection
The E3T incorporates a load short-circuit protection function. If the
load short-circuits, the output of the E3T will be turned OFF. Then,
recheck the wiring and turn on the E3T again to reset the load short-
circuit protection function. The load short-circuit protection function
will work if there is a current flow that is 1.5 times larger than the rated
load current. When using a capacitance load, be sure that the inrush
current will not exceed 1.5 times larger than the rated current.
Use of E39-E10 Sensitivity Adjustment Unit
(Dark-ON: E3T-ST12)
(At Min)
(At Center)
(At Max.)
Indicator
Adjuster
● Mounting
When mounting the Sensor, never strike it with a heavy object, such
as a hammer. Doing so may reduce its watertight properties. Use M2
screws and flat or spring washers to secure the Sensor.
(Tightening torque: 0.15 N·m max.)
1. Mount the Unit on the Receiver.
2. Set the adjuster of the Sensitivity Adjustment Unit to Max.
(Before shipping: Max.)
3. After mounting on the Sensor, adjust the optical axis and secure the
Sensor.
4. Place a workpiece between the Emitter and Receiver and gradually
turn the adjuster counterclockwise toward the Min. side. Stop
turning the adjuster when the operation indicator and stability
indicator (green) turn ON.
Mounting the Sensor on Moving Parts
B
Consider models that use break
resistant cables (e.g., Robotics Cables)
if the Sensor will be mounted on a
A
C
moving part, such as a robot hand. The
flexing resistance of Robotics Cable at
approximately 400 thousand times is far
superior to that of standard cable at
approximately 14 thousand times.
θ
θ
5. Remove the workpiece and confirm that the operation indicator is
OFF and the stability indicator (green) is ON. This completes the
adjustment.
R
Note: If the light attenuation rate due to a workpiece is 40% or less, the stability
indicator will not turn ON whether or not light is received. When the
variation of light is small such as when sensing semi-transparent
workpieces, carefully perform preliminary testing.
Cable Bending Rupture Test
(Tough Cable Breaking Test)
The cable is repeatedly bent with power
supplied to check the number of bends
until the current is turned OFF.
● Others
Weight
Do not install the E3T in the following locations.
• Locations subject to excessive dust or dirt
• Locations subject to direct sunlight
• Locations subject to corrosive gas
• Locations subject to contact with organic solvents
• Locations subject to vibration and shock
• Locations subject to contact with water, oil, or chemicals
• Locations subject to high humidities that might result in
condensation
Specimen Standard cable
2.4-mm dia.
Robotics cable
2.4-mm dia.
(20/0.08-mm
dia.),
(7/0.127-mm
dia.),
3 conductors
Bending angle (θ) 90° each to the left and right
Test
3 conductors
Bending speed
Load
50 times/min
Con-
200 g
tents/
condi-
tions
Operation per
bend
Once in 1 to 3 in the diagram
5 mm
Curvature radius
of support point
(R)
Approx. 14,000
times
Approx. 400,000
times
Result
14
E3T
(Unit: mm)
Dimensions
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
Sensors
Through-beam Models
(Side-view)
E3T-ST1@ (Emitter)
E3T-ST2@ (Emitter)
7
9.5
7.7
Mounting Holes
2-M2
3.8
2.7
14..66
9
0.2
9
Emitter
(1.3 dia.)
Two, 2.2 dia.
3.9
2.4-dia. vinyl-insulated round cable
with 2 conductors (Conductor cross
section: 0.1 mm² (AWG27),
Insulator diameter: 0.7 mm),
Standard length: 2 m
2.2
Emitter: E3T-ST@@-L
Receiver: E3T-ST@@-D
4.8
E3T-ST1@ (Receiver)
E3T-ST2@ (Receiver)
M12 Smartclick Pre-wired Connector Model
(E3T-ST@@-M1TJ)
7
9.5
7.7
2
3
1
4
44.7
Stability
indicator
Operation
Indicator
Mounting Holes
22--MM22
3.8
M12
2.7
14.6
9
0.2
2.4-dia. vinyl-insulated round cable
with 2 or 3 conductors
9
Receiver
(1.3 dia.)
Standard length: 0.3 m
3.9
Two, 2.2 dia.
2.4-dia. vinyl-insulated round cable
with 3 conductors (Conductor cross
section: 0.1 mm² (AWG27),
Insulator diameter: 0.7 mm),
Standard length: 2 m
e-CON Pre-wired Connector Model
(E3T-ST@@-ECON)
2.2
4.8
5.9
1
2
15
3
Through-beam Models (Flat)
E3T-FT1@ (Emitter)
E3T-FT2@ (Emitter)
4
15.6
2.4-dia. vinyl-insulated round cable
with 3 conductors
Standard lengths: 0.3 m and 2 m
12
3.5
Mounting Holes
2-M2
Termi-
nal No.
Specifica-
tions
Emitter
(1.3 dia.)
14
1
2
3
+V
---
15.8
8.6
0.2
8
0 V
Two, 2.2 dia.
3.2
Output
(receiver only)
4
2.4-dia. vinyl-insulated round cable
with 2 conductors (Conductor cross
section: 0.1 mm² (AWG27),
Insulator diameter: 0.7 mm),
Standard length: 2 m
1.75
Emitter: E3T-FT@@-L
Receiver: E3T-FT@@-D
4.4
8
* Refer to Mounting the Sensor on
Moving Parts on page 14 for details on
Robotics Cable models.
E3T-FT1@ (Receiver)
E3T-FT2@ (Receiver)
12
3.5
Operation Indicator
Stability indicator
Mounting Holes
2-M2
Lens
(1.3 dia.)
14
1155..88
8.6
0.2
8
Two, 2.2 dia.
3.2
2.4-dia. vinyl-insulated round cable
with 3 conductors (Conductor cross
section: 0.1 mm² (AWG27),
Insulator diameter: 0.7 mm),
Standard length: 2 m
4.4
8
1.75
15
E3T
Retro-reflective Models (Side-view)
E3T-SR4@
Mounting Holes
22--MM22
Stability
indicator
Operation
Indicator
7
111
9.2
1.75
15 0.2
3.8
4.5
200..66
15
Lens
(2.0 dia.)
Two, 2.2 dia.
3.9
M12 Smartclick Pre-wired Connector Model
(E3T-SR@@-M1TJ/E3T-SL@@-M1TJ/
E3T-FD@@-M1TJ)
2.4-dia. vinyl-insulated round cable
with 3 conductors (Conductor cross
section: 0.1 mm² (AWG27),
Insulator diameter: 0.7 mm),
Standard length: 2 m
3.7
6.3
2
3
1
4
44.7
Convergent-reflective Models (Side-view)
M12
E3T-SL1@
E3T-SL2@
2.4-dia. vinyl-insulated round cable
with 2 or 3 conductors
Standard length: 0.3 m
e-CON Pre-wired Connector
(E3T-SR@@-ECON/E3T-SL@@-ECON/
7
11
9.2
Mounting Holes
Stability
indicator
Operation
Indicator
E3T-FD@@-ECON)
22--MM22
3.8
5.9
4
1
2
Emitter lens
(1.5 dia.)
15
3
20.6
5
15
15 0.2
Receiver lens
(2.0 dia.)
4
15.6
2.4-dia. vinyl-insulated round cable
with 3 conductors
Standard lengths: 0.3 m and 2 m
3.9
Two, 2.2 dia.
2.4-dia. vinyl-insulated round cable
with 3 conductors (Conductor cross
section: 0.1 mm² (AWG27),
Insulator diameter: 0.7 mm),
Standard length: 2 m
3.7
6.3
Terminal Specifi-
No.
cations
1
+V
2
---
Diffuse-reflective Models (Flat)
3
0 V
E3T-FD1@
4
Output
* Refer to Mounting the Sensor on
Moving Parts on page 14 for details on
Robotics Cable models.
Stability
indicator
Operation
Indicator
3.5
12
Mounting Holes
2-M2
Emitter lens
(4.0 dia.)
4
Receiver
lens (2.0 dia.)
19
20.8
13.4
0.2
8
Two, 2.2 dia.
3.2
2.4-dia. vinyl-insulated round cable
with 3 conductors (Conductor cross
section: 0.1 mm² (AWG27),
Insulator diameter: 0.7 mm),
Standard length: 2 m
4.4
8
1.75
16
E3T
BGS Models (Flat)
E3T-FL1@
E3T-FL2@
M12 Smartclick Pre-wired Connector Model
(E3T-FL@@-M1TJ)
Mounting Holes
2-M2
2
3
1
4
44.7
Stability
indicator
Operation
Indicator
3.5
12
0.2
8
M12
2.4-dia. vinyl-insulated round cable
with 2 or 3 conductors
Standard length: 0.3 m
Receiver lens
(2.8 square)
6
19
20.8
Emitter lens
(1.5 dia.)
e-CON Pre-wired Connector
(E3T-FL@@-ECON)
7.4
5.9
Two, 2.2 dia.
3.2
1
2
3
4
15
2.4-dia. vinyl-insulated round cable
with 3 conductors (Conductor cross
section: 0.1 mm² (AWG27),
Insulator diameter: 0.7 mm),
Standard length: 2 m
1.75
4.4
8
15.6
2.4-dia. vinyl-insulated round cable
with 3 conductors
Standard lengths: 0.3 m and 2 m
Termi- Specifi-
nal No. cations
1
2
3
4
+V
---
0 V
Output
* Refer to Mounting the Sensor on Moving Parts on
page 14 for details on Robotics Cable models.
Accessories
Reflector (Provided with E3T-SR4@)
E39-R4
13.7
9.7
4.9
8.7
19 18
23
4
Two, 2.2 dia.
1.4
4
Material, reflective surface: acrylic
Rear surface: ABS
Reflector (Provided with E3T-SR4@-S)
E39-R37-CA
Mounting bracket
Reflector
13.7
13.7
8.7
(1.1)
Reflective
surface:
acrylic
23 18.3 10.2
18.3 23
Reflector: t 0.5
(adhesive tape side)
Mounting
Bracket:
t 0.5
Two, R1.55
Two, 3.1 dia.
Material: Mounting plate: stainless steel
(SUS301)
Reflective surface: acrylic
Note: The reflective plate and mounting plate (1) come as a set.
17
E3T
Accessories (Order Separately)
Slit for E3T-ST@@ Through-beam Models Slit for E3T-FT@@ Through-beam
Sensitivity Adjustment Unit
E39-S63
Models
(for E3T-ST1@ Through-beam Models)
E39-S64
E39-E10
With Slit Attachment
With Slit Attachment
With Slit Attachment
5.8
7.4
9.7
Two, 2.2 dia.
90°
1.0 0.05 dia.
0.5 0.05 dia.
12.6
12.3
(4.1)
12
7.4
(10.1)
2.7
2.7
4
Notch
(15.1)
18.7
2 dia.
Optical
axis
Adjuster
1 dia.
0.5 dia.
Note:Align the notch
Material: 0.2-mm
thick stainless steel
(SUS301)
Material: 0.1-mm-thick stainless steel
(SUS301)
direction of the Slit
9.7
when installing on the
Emitter and Receiver.
Material: stainless steel (SUS301)
Mounting Brackets for Side-view Models
E39-L116
(Two, R1.7)
(17.8)
7.5
4.1
2-3.4
1.6
(Two, R2)
(Two, R2)
5
4
2.2
11
Material: 1.2-mm-thick stainless
steel (SUS304)
(Two, R1.1)
31.2
9.5
(10.3)
90°
9.7
6.2
(Two, R1.2)
2.4
17.8
1.2
R1.5 max.
10
7.7
With Mounting Bracket (Example: E3T-ST11)
Two, M2 × 14
(Four, R2)
Three, M2
3
9
20.5
15
31
31.2
24.5
7
18
E3T
Mounting Brackets for Side-view Models
E39-L117
R1 max.
90°
1.2
(Two, R2)
(Two, R1.7)
2-R2
3.1
2.4
11.2
4
9
Material: 1.2-mm-thick stainless
steel (SUS304)
(23) 15
11.5 18
9
3.1
2-2.2
(10.3)
11.2
(Two, R1.7)
3.4
5
4.5
5
(Two, R1.1)
10
(11.2)
6.2
7.7
With Mounting Bracket (Example: E3T-ST11)
Two, M2 × 14
10.2
11.2
(Four, R2)
Three, M2
3
9
20.5
15
23
16.3
7
Mounting Brackets for Side-view Models
E39-L118
1.2
11.5
90°
11.5
90°
22.7
(Two, R1.7)
5
4.5
2.4
3.1
4
9
Material: 1.2-mm-thick stainless
steel (SUS304)
11.5 18 (23)
15
9
2-2.2
3.1
(Four, R2)
5
3.4
(Two, R1.1)
7.7
With Mounting Bracket (Example: E3T-ST11)
13.2
(Four, R2)
Two, M2 × 14
Three, M2
3
9
20.5
23
15
16.3
7
19
E3T
Mounting Brackets for Flat Models
E39-L119
With Mounting Bracket
(Example: E3T-FT11)
1.2
90°
10.5
15
Four, M2 tapped holes
8
3.2
9
3.5
7
2.4
2.4
16 12
8
Material: 1.2-mm-thick stainless
steel (SUS304)
10.6
9
7
Two, M2 × 8
Mounting Brackets for Flat Models
E39-L120
With Mounting Bracket
(Example: E3T-FT11)
4.2
(6.4)
(5.4)
14
1.2
22.5
Four, M2 tapped holes
13.5
8
3.2
2.4
Material: 1.2-mm-thick stainless
steel (SUS304)
16 12
8
10.6
2.4
6
13.5
Two, M2 × 8
20
Read and Understand This Catalog
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or
comments.
Warranty and Limitations of Liability
WARRANTY
OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified)
from date of sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR
FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS
DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS
IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT
LIABILITY.
In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS
OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT
SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
Application Considerations
SUITABILITY FOR USE
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's
application or use of the products.
At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the
products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,
machine, system, or other application or use.
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible
uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:
·
·
Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.
Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,
safety equipment, and installations subject to separate industry or government regulations.
·
Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE
SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND
INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
Disclaimers
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons.
It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.
However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or
establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual
specifications of purchased products.
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.
PERFORMANCE DATA
Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the
result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON
Warranty and Limitations of Liability.
ERRORS AND OMISSIONS
The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,
typographical, or proofreading errors, or omissions.
2010.2
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2010 All Right Reserved.
相关型号:
©2020 ICPDF网 联系我们和版权申明