EE-SPW311 [OMRON]
Logic Output Slotted Switch, 1-Channel, 13.4mm Slot Width;
| 型号： | EE-SPW311 |
| 厂家： | 
OMRON ELECTRONICS LLC |
| 描述： | Logic Output Slotted Switch, 1-Channel, 13.4mm Slot Width 输出元件 光电 |
| 文件： | 总5页 (文件大小：233K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
EE-SPW311/411
Photomicrosensor with a Sensing
Distance as Long as 1 m
H Easy-to-see Light-ON indicator
H Wide operating voltage range: 5 to
24 VDC
H Light modulation effectively reduces
external light interference
H Easy-to-wire connector ensures ease of
maintenance
H Convert to PNP output with EE-2002
conversion connector
Ordering Information
Appearance Sensing method Sensing Sensing object
distance
Output
Weight
Part number
configuration
Through beam
1 m
Opaque material,
5 mm dia. min.
Approximately
8.8 g
Dark-ON
EE-SPW311
EE-SPW411
Light-ON
Note: Wire Harness/Connector included with EE-SPW311 and EE-SPW411
J ACCESSORIES
Name
Connector for Emmitter
Connector for Receiver
Part number
EE-1006L
EE-1006D
EE--SPW311/411
EE--SPW311/411
Specifications
J RATINGS
Item
Transmissive type
EE-SPW311
EE-SPW411
Supply voltage
5 (-5%) to 24 (+10%) VDC, ripple (p-p): 10% max.
Current consumption
Sensing distance
Standard reference object
Directional angle
Control output
40 mA max. (emitter: 20 mA max.; receiver: 20 mA max.)
1 m
Opaque: 5 mm dia. min.
5° to 20°
At 5 to 24 VDC: 100 mA load current (I ) with a residual voltage of 0.8 V max.
C
When driving TTL: 40 mA load current (I ) with a residual voltage of 0.4 V max.
C
Output
Transistor on output stage
OFF
ON
ON
configuration
without detecting object
Transistor on output stage
with detecting object
OFF
Indicator
Without detecting object
With detecting object
ON
OFF
(See Note.)
Response frequency
Connecting method
Light source
100 Hz max. (200 Hz typ.)
Dedicated connectors: EE-1006L and EE-1006D
GaAs infrared LED (pulse modulated) with a peak wavelength of 940 nm
Si photo-transistor with a sensing wavelength of 850 nm max.
Receiver
Note: The indicator is a GaP red LED (peak emission wavelength: 700 nm).
J CHARACTERISTICS
Ambient illumination*
Sensing face: fluorescent light: 1,000 ℓ x max.; incandescent light: 3,000 ℓ x max.
Enclosure ratings
IP60
Ambient temperature
Operating
Storage
Operating
Storage
-10°C to 55°C (14°F to 131°F)
-25°C to 80°C (-13°F to 176°F)
45% to 85%
Ambient humidity
35% to 95%
Vibration resistance
Destruction: 200 to 2,000 Hz (with a peak acceleration of 10G’s), 1.5-mm double
amplitude for 2 hrs (with 4-minute cycles) each in X, Y, and Z directions
2
Shock resistance
Material
Destruction: 500 m/s (approx. 50G) for 3 times each in X, Y, and Z directions
Case: PBT; lens: polycarbonate
2
Cable length
10 m max. with a cross-sectional area of 0.3 mm min. (AWG24 min.)
Note: *The ambient illumination is measured on the surface of the receiver.
2
EE--SPW311/411
EE--SPW311/411
Engineering Data
J RECEIVER OUTPUT VS. SENSING
J PARALLEL MOVEMENT
DISTANCE (TYPICAL)
CHARACTERISTICS (TYPICAL)
Operating voltage
Y
X
Distance between sensors (cm)
Distance X (cm)
Operation
J INTERNAL/EXTERNAL CIRCUIT DIAGRAM
Light-ON/Dark-ON
5 to 24 VDC
Operation
indicator
R
L
Load
(relay)
Connect R only
L
when a logic cir-
cuit is driven.
OUT
Main
circuit
← I
C
Logic
circuit
0 V
J TIMING CHART
Light-ON
Dark-ON
Incident
Interrupted
Incident
Interrupted
ON
LIGHT indicator
(red)
ON
LIGHT indicator
(red)
OFF
ON
OFF
ON
Output
Output
transistor
transistor
OFF
Operates
OFF
Operates
Load (relay)
Load (relay)
Releases
Releases
H
H
Output voltage
(logic)
Output voltage
(logic)
L
L
3
EE--SPW311/411
EE--SPW311/411
Dimensions
Unit: mm (inch)
J EE-SPW311/SPW411
Receiver (EE-SPWD_11)
Emitter (EE-SPWL_11)
25.4 (1.00)
19 (0.75)
25.4 (1.00)
19 (0.75)
Two, 3.2 dia. holes
Two, 3.2 dia. holes
8 (0.31)
8 (0.31)
0.6
0.6
(0.02)
(0.02)
Indicator
7.4
1.5
19 (0.75)
13.4 (0.53)
7.4
19 (0.75)
13.4 (0.53)
(0.29)
(0.06)
(0.29)
Sensing
window
Sensing
window
Two, 3.8 dia.
holes
Two, 3.8 dia.
holes
27
27
(1.06)
15.1
15.1
(1.06)
(0.59)
(0.59)
14.1
14.1
(0.56)
(0.56)
5.5
5.5
6.2 (0.24)
6.2 (0.24)
(0.22)
(0.22)
(1) (2)
(3)
(1) (2)
(3)
0.7
0.7
2.54 (0.10)
(0.03)
(0.03)
2.54 (0.10)
0.3
0.3
(0.01)
(0.01)
Terminal Arrangement
Emitter
(1)
Receiver
(1)
(2)
V
V
CC
CC
(2)
OUT
OUT
OUTPUT
(3)
(3)
GND (0 V)
GND (0 V)
J EE-1006L CONNECTOR FOR EMITTER (ATTACHMENT)
0.6 (0.02)
16.2 (0.64)
20 (0.79)
2,000 (78.74)
(1)
(2)
(3)
(4)
11.8
(0.46)
Terminal Arrangement
(1) Brown (Red)
(4) Blue (Black) GND (0 V)
2.54 (0.10)
V
5.3
CC
(0.21)
Note: Older standard colors are shown in
parentheses. The connector comes
with an 18 strand, 0.12-wire, 2-m
attached RED CABLE.
J EE-1006D CONNECTOR FOR RECEIVER (ATTACHMENT)
0.6 (0.02)
16.2 (0.64)
20 (0.79)
2,000 (78.74)
(1)
(2)
(3)
(4)
11.8
(0.46)
Terminal Arrangement
2.54
5.3
(0.10)
(1) Brown
(2) Black
(3) Blue
(Red)
(White) OUTPUT
(Black) GND (O V)
V
CC
(0.21)
Note: Older standard colors are shown in
parentheses. The connector comes
with an 18 strand, 0.12-wire, 2-m
attached GRAY CABLE.
4
EE--SPW311/411
EE--SPW311/411
Precautions
Refer to the Technical Information Section for general
precautions.
3. Fix the position of the receiver (or emitter) securely, move the
emitter (or receiver) horizontally and vertically to check the
range in which the operation indicator is lit. Then locate the
emitter (or receiver) in the center of the range, and fix the
position securely.
J CHEMICAL RESISTANCE
The sensing window is made of a polycarbonate resin which
withstands chloride solvents and strong acids but is soluble in
strong alkali, aromatic hydrocarbons, and aliphatic
hydrocarbonate chloride solvents.
J AXIS ADJUSTMENT
1. When mounting the emitter and receiver, ensure that the
center line of each lens will be on the same plane (refer to
the diagrams).
Side view
J CONNECTION
Extra care must be taken when making connections to the units
because they are protected against reverse polarity.
Install the wiring for the photomicrosensor in a separate wiring
duct well away from both supply lines and high voltage cables to
prevent damage or faulty operation from induced transients.
Any extension must be shorter than 10 meters with wire that has
Top view
2
a cross-sectional area greater than 0.3 mm .
J POWER SUPPLY
When using a commercial switching regulator, the frame ground
(FG) and ground (G) pins must be grounded. Failure to do so
may result in faulty operation due to switching noise.
2. Turn on the emitter and receiver after making sure that they
have been wired correctly. When power is turned on, the
operation indicator on the receiver will light. Make sure the
operation indicator is off when an object intercepts the optical
axis and the operation indicator lights again when the object
is removed.
J LOADS
Operate the sensor with a load. The sensor is not protected
against short circuits.
When the photomicrosensor is turned on, a period of
approximately 1 to 3 ms is required for the photomicrosensor to
operate stably.
NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4.
R
OMRON ON--LINE
OMRON ELECTRONICS LLC
One East Commerce Drive
Schaumburg, IL 60173
1-800-55-OMRON
OMRON CANADA, INC.
885 Milner Avenue
Global -- http://www.omron.com
USA -- http://www.omron.com/oei
Canada -- http://www.omron.com/oci
Toronto, Ontario M1B 5V8
416-286-6465
Cat. No. GC APMS-1
09/02
Specifications subject to change without notice.
Printed in U.S.A.
相关型号：
©2020 ICPDF网 联系我们和版权申明