G2RL-1ATP-E-DC48 [OMRON]
Power/Signal Relay, SPST, Momentary, 0.009A (Coil), 48VDC (Coil), 430mW (Coil), 16A (Contact), 24VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount;型号: | G2RL-1ATP-E-DC48 |
厂家: | OMRON ELECTRONICS LLC |
描述: | Power/Signal Relay, SPST, Momentary, 0.009A (Coil), 48VDC (Coil), 430mW (Coil), 16A (Contact), 24VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount |
文件: | 总8页 (文件大小:305K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PCB Relay
G2RL
High Capacity, Low Profile Relay
D Designed for cooking and HVAC controls: blower motor,
damper, active air purification, duct flow boost fans, etc.
D 10 kV impulse surge withstand.
D Available in traditional full PCB mounting or with PCB
coil driving terminals with quick connect (5 or 7.5 mm)
contact load terminals.
D Provides high circuit insulation, with minimum 10 mm
both creepages and clearances (8 mm for -1APT type).
D Meets EC required tracking resistance of CTI > 250.
D Class-F coil insulation standard. For high temperature
appliance and HVAC applications, the -1APT type is
related to 16A @ 250 VAC @105_C for 100K
operations.
VDE
D Low 400 mW coil power consumption.
D UL, CSA and VDE approved.
Ordering Information
Contact form
SPST-NO
Classification
Enclosure ratings
SPDT
DPST-NO
DPDT
Model
Class-F
General-purpose
High-capacity (-E)
Flux protection
Fully sealed
Flux protection
Fully sealed
G2RL-1A
G2RL-1
G2RL-14
G2RL-1-E
G2RL-14-E
---
G2RL-2A
G2RL-2A4
---
---
---
G2RL-2
G2RL-24
---
---
---
G2RL-1A4
G2RL-1A-E
G2RL-1A4-E
G2RL-1APT-E
QC contact terminal
Flux protected
Note: When ordering, add the rated coil voltage to the part number. Example: G2RL-1A DC12
J MODEL NUMBER LEGEND
3. Enclosure Ratings
G2RL-jjj-j-j
None: Flux protection (vented)
1
2
3
4
5
TP:
Flux protection with quick-connect contact/load
terminals (fully sealed in development)
Fully sealed (with “knock off vent nib”)
1. Number of Poles
4:
1:
2:
1 pole
2 poles
4. Classification
None: General purpose (not in -1APT type)
2. Contact Form
E:
High capacity (1 pole)
None: jPDT
5. Approved Standards
A:
jPST-NO
None: UL, CSA, VDE, UL Class F Insulation
1
PCB Relay G2RL
Specifications
J COIL RATINGS
Rated voltage
Rated current
Coil resistance
5 VDC
80.0 mA
62.5 Ω
0.18
12 VDC
33.33 mA
360 Ω
1.01
24 VDC
16.7 mA
1,440 Ω
4.19
48 VDC
8.96 mA
5,358 Ω
15.91
Coil inductance (H) (ref.
value)
Armature OFF
Armature ON
0.44
2.47
9.72
33.65
Must operate voltage
Must release voltage
Max. voltage
70% max. of the rated voltage
10% min. of the rated voltage
130% of the rated voltage (at 85°C;105°C for -1APT type)
Power consumption
Approx. 400 mW
Approx. 430 mW
J CONTACT RATINGS
Number of poles
Contact material
Load
1 pole
2 poles
AgSnO
AgNi
2
Resistive load (cosφ=1)
Resistive load (cosφ=1)
Rated load
12 A (16 A) at 250 VAC
12 A (16 A) at 24 VDC
8 A at 250 VAC
8 A at 30 VDC
Rated carry current
Max. operating voltage
Max. operating current
Max. switching power
Minimum load
12 A (16 A)
8 A (70°C)/5 A (85°C)
440 VAC, 300 VDC
12 A (16 A)
8 A
3,000 VA (4,000 VA), 288 W (384 W)
40 mA @ 24 VDC (vented)
2,000 VA, 240 W
20 mA @ 24 VDC (sealed)
Note: Values in parentheses are those for the high-capacity and quick connect models.
J CHARACTERISTICS
Item
1 pole
2 poles
Contact resistance
Operate (set) time
Release (reset) time
Max. operating frequency
100 mΩ max.
Approx. 7 ms
Approx. 2 ms
Mechanical: 18,000 operation/hr
Electrical:
1,800 operation/hr at rated load
Insulation resistance
Dielectric strength
1,000 MΩ min. (at 500 VDC)
5,000 VAC, 1 min between coil and contacts
5,000 VAC, 1 min between coil and contacts
1,000 VAC, 1 min between contacts of same polarity 2,500 VAC, 1 min between contacts of different polarity
1,000 VAC, 1 min between contacts of same polarity
Impulse withstand voltage
Vibration resistance
10 kV (1.2×50 µs) between coil and contact
Destruction:
Malfunction:
10 to 55 Hz, 1.5-mm double amplitude
10 to 55 Hz, 1.5-mm double amplitude
2
Shock resistance
Destruction:
Malfunction:
1,000 m/s
2
2
Energized:
Not energized:
100 m/s
100 m/s
Life expectancy (Mechanical)
Ambient temperature
20,000,000 operations (at 18,000 operations/hr)
Operating:
Storage:
--40°C to 85°C (with no icing) (G2RL-1APT 105°C max)
--40°C to 85°C (with no icing)
Ambient humidity
Weight
35% to 85%
Approx. 12 g
Packaging
Standard: 20 relays/stick -1APT: 40 relays/tray
2
PCB Relay G2RL
J APPROVED STANDARDS
UL508 (File No. E41643)/CSA C22.2 (No.14) (File No. LR31928)
Part number
G2RL-1A
Contact form
SPST-NO
Coil ratings
3 to 48 VDC
Contact ratings
12 A at 250 VAC (General use), 100k ops.
12 A at 24 VDC (Resistive), 50k ops.
1/3 hp, 120 VAC, 30k ops., 60_C
G2RL-1
SPDT
G2RL-1A-E
SPST-NO (High capacity)
16 A at 250 VAC (General use), 100k ops.
16 A at 24 VDC (Resistive), 50k ops.
20 A at 240 VAC (General use), 85_C
15 A at 240 VAC (General use), 105_C
1/2 hp, 120 VAC, 100k ops., 70_C (NO)
G2RL-1ATP-E
G2RL-1-E
SPST-NO (QC contact terminals)
SPDT (High capacity)
DC12, DC24
3 to 48 VDC
16 A at 250 VAC (Resistive), 100k ops.
105°C
16 A at 250 VAC (General use), 100k ops.
16 A at 24 VDC (Resistive), 50k ops.
20 A at 240 VAC (General use), 85_C
15 A at 240 VAC (General use), 105_C
1/2 hp, 120 VAC, 100k ops., 70_C (NO)
8 A at 277 VAC (General use), 100k ops.
8 A at 30 VDC (Resistive), 100k ops.
G2RL-2A
G2RL-2
DPST-NO
DPDT
VDE (VDE0435)
Part number
G2RL
Contact form
1 pole
Coil ratings
Contact ratings
5, 12, 18, 22, 24, 48 VDC
12 A at 250 VAC (cosφ=1)
12 A at 24 VDC (L/R=0 ms)
AC15: 3 A at 240 VAC
DC13: 2.5 A at 24 VDC, 50 ms
1 pole (High capacity)
16 A at 250 VAC (cosφ=1)
16 A at 24 VDC (L/R=0 ms)
AC15: 3 A at 240 VAC (NO)
1.5 A at 240 VAC (NC)
DC13: 2.5 A at 24 VDC (NO), 50 ms
2 poles
8 A at 250 VAC (cosφ=1)
8 A at 24 VDC (L/R=0 ms)
AC15: 1.5 A at 240 VAC
DC13: 2 A at 30 VDC, 50 ms
Note: To achieve approved life cycles on sealed models, the relay should be vented by removing “knock off vent nib” on top of relay case
after the soldering/washing process.
Electrical Life Data
Part number
G2RL-1-E
Contact rating
Minimum operations
100,000 operations min. (1 sec. ON / 9 sec. OFF)
30,000 operations min.
16 A at 250 VAC (cosφ=1)
16 A at 24 VDC
8 A at 250 VAC (cosφ=0.4)
8 A at 30 VDC (L/R=7 ms)
12 A at 250 VAC (cosφ=1)
12 A at 24 VDC
200,000 operations min. (N.O. side operation)
10,000 operations min.
G2RL-1
100,000 operations min. (1 sec. ON / 9 sec. OFF)
30,000 operations min.
5 A at 250 VAC (cosφ=0.4)
5 A at 30 VDC (L/R=7 ms)
8 A at 250 VAC (cosφ=1)
8 A at 30 VDC
150,000 operations min.
20,000 operations min.
G2RL-2
100,000 operations min. (1 sec. ON / 9 sec. OFF)
30,000 operations min.
G2RL-1A-E
G2RL-1ATP-E
Pilot duty (A300), 250 VAC
Pilot duty (A300), 125 VAC
16A at 250 VAC
250,000 operations min. (1 sec. ON / 9 sec OFF)
150,000 operations min. (1 sec. ON / 9 sec OFF)
100,000 operations min.
Note: 1. The results shown reflect minimum cycles using a very severe duty cycle of 1 sec ON/1 sec OFF (unless otherwise specified
above).
2. In order to obtain the full rated life cycles on the fully sealed models, the relay should be properly vented by removing the
“knock off vent nib” on top of the relay case after the soldering / washing process of the P.C.B.
Contact Omron for applications where venting of the sealed relay is not possible.
3
PCB Relay G2RL
Engineering Data
J MAXIMUM SWITCHING CAPACITY
G2RL-1A, G2RL-1
G2RL-1A-E, G2RL-1-E,
G2RL-2A, G2RL-2
G2RL-1ATP-E
Switching voltage (V)
Switching voltage (V)
Switching voltage (V)
J AMBIENT TEMPERATURE
J AMBIENT TEMPERATURE
VS RATED CARRY CURRENT
VS MAXIMUM COIL VOLTAGE
85
Ambient Temperature (°C)
Ambient Temperature (°C)
Note: The maximum coil voltage refers to the maximum value in a varying range of operating power voltage, not a continuous voltage.
Connections
Company
Description
Model Number
JST
TP5 Housing
TP5 Contact
TP7 Housing
TP7 Contact
TP5 Connector
RSFP-3V
SRSF-61T-250A
PS-250-A
SPS-61T-250
928344-2
AMP
TP7 Positive Locking Housing
TP7 Contact for 178833
TP5 RAST5 Female Connector
178833
170327, 8, 9
90835-0001
Molex
4
PCB Relay G2RL
Dimensions
Unit: mm (inch)
G2RL-1A, G2RL-1A4
Terminal Arrangement/
Internal Connection
(Bottom View)
r, 1.3±0.1 dia.
es
(2.5)
1
3
5
4
*
Indicates average
dimensions.
Terminal Arrangement/
Internal Connection
(Bottom View)
Mounting Holes
(Bottom View)
G2RL-1, G2RL-14
Five, 1.3±0.1 dia.
holes
(2.5)
1
3
2
5
4
*
Indicates average
dimensions.
Terminal Arrangement/
Internal Connection
(Bottom View)
Mounting Holes
(Bottom View)
G2RL-1A-E, G2RL-1A4-E
Six, 1.3±0.1 dia.
holes
(2.5)
3
6
4
1
8
5
*
Indicates average
dimensions.
5
PCB Relay G2RL
G2RL-1ATP5-E
PCB Mounting Holes
(Bottom View)
Terminal Arrangement/
Internal Connection
(Bottom View)
G2RL-1ATP7-E
(Note: quick-connect terminals
are bare copper alloy.)
Terminal Arrangement/
Internal Connection
(Bottom View)
Mounting Holes
(Bottom View)
G2RL-1-E, G2RL-14-E
Eight, 1.3±0.1 dia.
holes
(2.5)
2
3
6
4
5
1
8
7
*
Indicates average
dimensions.
Terminal Arrangement/
Internal Connection
(Bottom View)
Mounting Holes
(Bottom View)
G2RL-2A, G2RL-2A4
Six, 1.3±0.1 dia.
holes
(2.5)
*
Indicates average
dimensions.
Terminal Arrangement/
Internal Connection
(Bottom View)
Mounting Holes
(Bottom View)
G2RL-2, G2RL-24
Eight, 1.3±0.1 dia.
holes
(2.5)
2
1
8
3
6
4
5
7
*
Indicates average
dimensions.
6
PCB Relay G2RL
(a) Outdoor use, use involving potential chemical contamination or electrical
interference.
Omron Electronic Components, LLC
Terms and Conditions of Sales
(b) Use in consumer Products or any use in significant quantities.
(c) Energy control systems, combustion systems, railroad systems, aviation systems,
medical equipment, amusement machines, vehicles, safety equipment, and
installations subject to separate industry or government regulations.
(d) Systems, machines, and equipment that could present a risk to life or property.
3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING
SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE
SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND
THAT THE PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE
INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED
VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION
BY SELLER.
I. GENERAL
1. Definitions: The words used herein are defined as follows.
(a) Terms:
(b) Seller:
(c) Buyer:
These terms and conditions
Omron Electronic Components LLC and its subsidiaries
The buyer of Products, including any end user in section III through VI
(d) Products: Products and/or services of Seller
(e) Including: Including without limitation
2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments,
invoices, purchase orders and other documents, whether electronic or in writing,
relating to the sale of Products by Seller. Seller hereby objects to any Terms proposed
in Buyer’s purchase order or other documents which are inconsistent with, or in
addition to, these Terms.
5. Programmable Products: Seller shall not be responsible for the Buyer’s programming
of a programmable Product.
3. Distributor: Any distributor shall inform its customer of the contents after and including
section III of these Terms.
IV. WARRANTY AND LIMITATION
II. SALES
1. Warranty: Seller’s exclusive warranty is that the Products will be free from defects in
materials and workmanship for a period of twelve months from the date of sale by
Seller (or such other period expressed in writing by Seller). SELLER MAKES NO
WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL
OTHER WARRANTIES, NON--INFRINGEMENT, MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE OF THE PRODUCTS.
1. Prices; Payment: All prices stated are current, subject to change without notice by
Seller. Buyer agrees to pay the price in effect at time of shipment. Payments for
Products received are due net 30 days unless otherwise stated in the invoice. Buyer
shall have no right to set off any amounts against the amount owing in respect of this
invoice.
2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to
Buyer after deducting transportation charges, taxes and duties, and will be allowed
only if (a) the invoice is paid according to Seller’s payment terms and (b) Buyer has no
past due amounts owing to Seller.
2. Buyer Remedy: Seller’s sole obligation hereunder shall be to replace (in the form
originally shipped with Buyer responsible for labor charges for removal or replacement
thereof) the non-complying Product or, at Seller’s election, to repay or credit Buyer an
amount equal to the purchase price of the Product; provided that there shall be no
liability for Seller or its affiliates unless Seller’s analysis confirms that the Products were
handled, stored, installed and maintained and not subject to contamination, abuse,
misuse or inappropriate modification. Return of any Products by Buyer must be
approved in writing by Seller before shipment.
3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the
maximum legal rate, whichever is less, on any balance not paid within the stated
terms.
4. Orders: Seller will accept no order less than 200 U.S. dollars net billing.
5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer
shall make remittance to Seller at the then current exchange rate most favorable to
Seller; provided that if remittance is not made when due, Buyer will convert the amount
to U.S. dollars at the then current exchange rate most favorable to Seller available
during the period between the due date and the date remittance is actually made.
6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining
any government approvals regarding the importation or sale of the Products.
7. Taxes: All taxes, duties and other governmental charges (other than general real
property and income taxes), including any interest or penalties thereon, imposed
directly or indirectly on Seller or required to be collected directly or indirectly by Seller
for the manufacture, production, sale, delivery, importation, consumption or use of the
Products sold hereunder (including customs duties and sales, excise, use, turnover
and license taxes) shall be charged to and remitted by Buyer to Seller.
8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to
Seller, Seller reserves the right to stop shipments or require satisfactory security or
payment in advance. If Buyer fails to make payment or otherwise comply with these
Terms or any related agreement, Seller may (without liability and in addition to other
remedies) cancel any unshipped portion of Products sold hereunder and stop any
Products in transit until Buyer pays all amounts, including amounts payable hereunder,
whether or not then due, which are owing to it by Buyer. Buyer shall in any event
remain liable for all unpaid accounts.
3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED
WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT,
WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT
SHALL LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL
PRICE OF THE PRODUCT ON WHICH LIABILITY IS ASSERTED.
4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and its
employees from and against all liabilities, losses, claims, costs and expenses (including
attorney’s fees and expenses) related to any claim, investigation, litigation or
proceeding (whether or not Seller is a party) which arises or is alleged to arise from
Buyer’s acts or omissions under these Terms or in any way with respect to the
Products.
V. INFORMATION; ETC.
1. Intellectual Property: The intellectual property embodied in the Products is the
exclusive property of Seller and its affiliates and Buyer shall not attempt to duplicate it
in any way without the written permission of Seller. Buyer (at its own expense) shall
indemnify and hold harmless Seller and defend or settle any action brought against
Seller to the extent that it is based on a claim that any Product made to Buyer
specifications infringed intellectual property rights of another party.
9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer
indemnifies Seller fully against all costs or expenses arising in connection therewith.
10. Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting
from causes beyond its control, including earthquakes, fires, floods, strikes or other
labor disputes, shortage of labor or materials, accidents to machinery, acts of
sabotage, riots, delay in or lack of transportation or the requirements of any
government authority.
2. Property; Confidentiality: Notwithstanding any charges to Buyer for engineering or
tooling, all engineering and tooling shall remain the exclusive property of Seller. All
information and materials supplied by Seller to Buyer relating to the Products are
confidential and proprietary, and Buyer shall limit distribution thereof to its trusted
employees and strictly prevent disclosure to any third party.
3. Performance Data: Performance data is provided as a guide in determining suitability
and does not constitute a warranty. It may represent the result of Seller’s test
conditions, and the users must correlate it to actual application requirements.
4. Change In Specifications: Product specifications and description may be changed at
any time based on improvements or other reasons. It is Seller’s practice to change
part numbers when published ratings or features are changed, or when significant
engineering changes are made. However, some specifications of the Product may be
changed without any notice.
11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller:
(a) All sales and shipments of Products shall be FOB shipping point (unless otherwise
stated in writing by Seller), at which point title to and all risk of loss of the Products
shall pass from Seller to Buyer, provided that Seller shall retain a security interest
in the Products until the full purchase price is paid by Buyer;
(b) Delivery and shipping dates are estimates only; and
(c) Seller will package Products as it deems proper for protection against normal
handling and extra charges apply to special conditions.
5. Errors And Omissions: The information on Seller’s website or in other documentation
has been carefully checked and is believed to be accurate; however, no responsibility
is assumed for clerical, typographical or proofreading errors or omissions.
6. Export Controls: Buyer shall comply with all applicable laws, regulations and licenses
regarding (a) export of the Products or information provided by Seller; (b) sale of
Products to forbidden or other proscribed persons or organizations; (c) disclosure to
non-citizens of regulated technology or information.
12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products
occurring before delivery to the carrier must be presented in detail in writing to Seller
within 30 days of receipt of shipment.
III. PRECAUTIONS
1. Suitability: IT IS THE BUYER’S SOLE RESPOINSIBILITY TO ENSURE THAT ANY
OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED
VEHICLE APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR
DETERMINING APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH
RESPECT TO THE BUYER’S APPLICATION INCLUDING (A) ELECTRICAL OR
ELECTRONIC COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END
PRODUCT, (E) SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING
ENVIRONMENT. Buyer acknowledges that it alone has determined that the Products
will meet their requirements of the intended use in all cases. Buyer must know and
observe all prohibitions of use applicable to the Product/s.
VI. MISCELLANEOUS
1. Waiver: No failure or delay by Seller in exercising any right and no course of dealing
between Buyer and Seller shall operate as a waiver of rights by Seller.
2. Assignment: Buyer may not assign its rights hereunder without Seller’s written consent.
3. Law: These Terms are governed by Illinois law (without regard to conflict of laws).
Federal and state courts in Illinois have exclusive jurisdiction for any dispute
hereunder.
4. Amendment: These Terms constitute the entire agreement between Buyer and Seller
relating to the Products, and no provision may be changed or waived unless in writing
signed by the parties.
2. Use with Attention: The followings are some examples of applications for which
particular attention must be given. This is not intended to be an exhaustive list of all
possible use of any Product, nor to imply that any use listed may be suitable for any
Product:
5. Severability: If any provision hereof is rendered ineffective or invalid, such provision
shall not invalidate any other provision.
7
PCB Relay G2RL
Certain Precautions on Specifications and Use
1. Suitability of Use. Seller shall not be responsible for conformity with any
standards,codes orregulations whichapply tothecombinationoftheProd-
uct in Buyer’s application or use of the Product. At Buyer’s request, Seller
willprovideapplicablethirdparty certificationdocuments identifyingratings
and limitations of use which apply to the Product. This information by itself
is not sufficient for a completedetermination of the suitability of theProduct
in combination with the end product, machine, system,or otherapplication
or use. Buyer shall be solely responsible for determining appropriateness
oftheparticular ProductwithrespecttoBuyer’s application,productorsys-
tem. Buyer shalltakeapplicationresponsibility inallcases but thefollowing
is a non-exhaustive list of applications for which particular attention must
be given:
2. ProgrammableProducts. Seller shallnotberesponsiblefor theuser’s pro-
gramming of a programmable product, or any consequence thereof.
3. Performance Data. Performance data given in this publication is provided
as a guide for the user in determining suitability and does not constitute a
warranty. It may represent the result of Seller’s test conditions, and theus-
ers must correlate it to actual application requirements. Actual perfor-
mance is subject to Seller’s Warranty and Limitations of Liability.
4. Change in Specifications. Product specifications and accessories may
be changed at any time based on improvements and other reasons. It is
our practice to change part numbers when published ratings or features
are changed, or when significant construction changes are made. How-
ever, some specifications of the Product may be changed without any no-
tice. When in doubt, special part numbers may be assigned to fix or es-
tablish key specifications for your application. Please consult with your
Seller representative at any time to confirm actual specifications of pur-
chased Product.
(i) Outdoor use, uses involving potential chemical contamination or
electrical interference, or conditions or uses not described in this
document.
(ii) Energy control systems, combustion systems, railroad systems,
aviation systems, medical equipment, amusement machines,
vehicles, safety equipment, and installations subject to separate
industry or government regulations.
5. Errors and Omissions. The information in this publication has been care-
fully checked and is believed to be accurate; however, no responsibility
is assumed for clerical, typographical or proofreading errors, or omis-
sions.
(iii) Use in consumer products or any use in significant quantities.
(iv) Systems, machines and equipment that could present a risk to life or
property. Please know and observe all prohibitions of use applicable
to this product.
6. RoHS Compliance. Where indicated, our products currently comply, to
the best of our knowledge as of the date of this publication, with the re-
quirements of the European Union’s Directive on the Restriction of certain
Hazardous Substances (“RoHS”), although the requirements of RoHS do
not take effect until July 2006. These requirements may be subject to
change. Please consult our website for current information.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SE-
RIOUSRISKTO LIFEORPROPERTYWITHOUTENSURING THATTHE
SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE
RISKS, AND THAT THEOMRON PRODUCTISPROPERLYRATEDAND
INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIP-
MENT OR SYSTEM.
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website
at www.omron.com/oei – under the “About Us” tab, in the Legal Matters section.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.omron.com/oei
Canada - http://www.omron.ca
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
847-882-2288
01/07
Specifications subject to change without notice
Printed in USA
Cat. No. J01C-E-01
相关型号:
G2RL-1DC12
Power/Signal Relay, SPDT, Momentary, 0.033A (Coil), 12VDC (Coil), 400mW (Coil), 12A (Contact), 300VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANT
OMRON
G2RL-2-24VDC
POWER/SIGNAL RELAY, DPDT, MOMENTARY, 0.017A (COIL), 24VDC (COIL), 400mW (COIL), 8A (CONTACT), 30VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT, ROHS COMPLIANT
OMRON
G2RL-2-48VDC
POWER/SIGNAL RELAY, DPDT, MOMENTARY, 0.009A (COIL), 48VDC (COIL), 430mW (COIL), 8A (CONTACT), 30VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT, ROHS COMPLIANT
OMRON
G2RL-2-5VDC
POWER/SIGNAL RELAY, DPDT, MOMENTARY, 0.08A (COIL), 5VDC (COIL), 400mW (COIL), 8A (CONTACT), 30VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT, ROHS COMPLIANT
OMRON
G2RL-2-CFDC24
Power/Signal Relay, 2 Form C, DPDT, Momentary, 0.017A (Coil), 24VDC (Coil), 400mW (Coil), 8A (Contact), 300VDC (Contact), DC Input, Random, AC/DC Output, Through Hole-Straight Mount,
OMRON
G2RL-2-CFDC48
Power/Signal Relay, DPDT, Momentary, 0.009A (Coil), 48VDC (Coil), 430mW (Coil), 8A (Contact), 300VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount,
OMRON
G2RL-2-DC24
POWER/SIGNAL RELAY, DPDT, MOMENTARY, 0.017A (COIL), 24VDC (COIL), 400mW (COIL), 8A (CONTACT), 300VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT, ROHS COMPLIANT
OMRON
©2020 ICPDF网 联系我们和版权申明