G3R-IDZR1SNDC12-24 [OMRON]
Trigger Output SSR,;
| 型号： | G3R-IDZR1SNDC12-24 |
| 厂家： | 
OMRON ELECTRONICS LLC |
| 描述： | Trigger Output SSR, 输出元件 光电 |
| 文件： | 总10页 (文件大小：241K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Solid State Relay
G3R-I/O
Compact SSRs for I/O Interface with High
Dielectric Strength Requirements
• High-speed models with optimum input ratings for a variety of
sensors are available.
• Input Modules and Output Modules that have the same foot-
print as the G2R.
• Using a coupler approved by VDE 0884 and assuring an I/O
dielectric strength of 4 kV.
• Incorporating an easy-to-see monitoring indicator.
• Approved by UL, CSA, and TÜV.
• Can be used with P2RF-05E socket for use on 35 mm DIN
track.
Ordering Information
To Order: Select the part number and add the desired coil voltage rating, (e.g., G3R-IAZR1SN-DC5)
ꢀ Input Module
Isolation
Indicator
Response speed
Model
Logic level
Rated input
voltage
Supply voltage
4 to 32 VDC
Supply current
Photocoupler
Yes
—
0.1 to 100 mA
100 to 240 VAC
5 VDC
G3R-IAZR1SN
G3R-IDZR1SN
High-speed
(1 kHz)
12 to 24 VDC
5 VDC
Low-speed
(10 Hz)
G3R-IDZR1SN-1
12 to 24 VDC
ꢀ Output Module
Isolation
Phototriac
Photocoupler
Indicator
Zero cross
function
Model
Rated output
load
Rated input
Yes
Yes
No
—
2 A at 100 to 240 VAC
5 to 24 VDC
G3R-OA202SZN
G3R-OA202SLN
G3R-ODX02SN
G3R-OD201SN
2 A at 5 to 48 VDC
1.5 A at 48 to 200 VDC
Note: When ordering a TÜV approved model, add “-UTU” to the model number as shown below:
Example: G3R-OA202SZN-UTU.
850
Solid State Relay G3R-I/O
ꢀ I/O Indication
I/O module classification and AC/DC use are indicated on the mark
affixed to the top of the product.
Mark indication
Specification
Input module, AC input
Input module, DC input
Output module, AC output
Output module, DC output
AC IN
DC IN
AC OUT
DC OUT
Mark attached to the top of the product
Specifications
ꢀ Ratings
Input Module
Input
Model
Rated voltage
Operating voltage
Input current
Must operate
voltage
Must release
voltage
G3R-IAZR1SN
G3R-IDZR1SN
100 to 240 VAC
5 VDC
60 to 264 VAC
4 to 6 VDC
15 mA max.
8 mA max.
60 VAC max.
20 VAC min.
4 VDC max.
6.6 VDC max.
4 VDC max.
6.6 VDC max.
1 VDC min.
3.6 VDC min.
1 VDC min.
3.6 VDC min.
12 to 24 VDC
5 VDC
6.6 to 32 VDC
4 to 6 VDC
G3R-IDZR1SN-1
12 to 24 VDC
6.6 to 32 VDC
Output
Model
Logic level supply voltage
4 to 32 VDC
Logic level supply current
0.1 to 100 mA
G3R-IAZR1SN
G3R-IDZR1SN
G3R-IDZR1SN-1
Solid State Relay G3R-I/O
851
Output Module
Input
Model
Rated voltage
5 to 24 VDC
Operating voltage
Input current
15 mA max.
Must operate
voltage
Must release
voltage
G3R-OA202SZN
G3R-OA202SLN
G3R-ODX02SN
G3R-OD201SN
4 to 32 VDC
4 VDC max.
1 VDC min.
(at 25°C)
8 mA max.
Output
Model
G3R-OA202SZN
G3R-OA202SLN
G3R-ODX02SN
G3R-OD201SN
Rated load voltage
Load voltage range
Load current (see note)
Inrush current
100 to 240 VAC
75 to 264 VAC
0.05 to 2 A
30 A (60 Hz, 1 cycle)
5 to 48 VDC
4 to 60 VDC
0.01 to 2 A
8 A (10 ms)
8 A (10 ms)
48 to 200 VDC
40 to 200 VDC
0.01 to 1.5 A
Note: The minimum current value is measured at 10°C min.
Characteristics
ꢀ Input Module
Item
G3R-IAZR1SN
G3R-IDZR1SN
G3R-IDZR1SN-1
Operate time
Release time
20 ms max.
20 ms max.
10 Hz
0.1 ms max.
15 ms max.
0.1 ms max.
1 kHz
15 ms max.
10 Hz
Response frequency
Output ON voltage drop
Leakage current
1.6 V max.
5 µA max.
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
100 MΩ min. between input and output
4,000 VAC, 50/60 Hz for 1 min. between input and output
10 to 55 Hz, 1.5-mm double amplitude
1,000 m/s2 {approx. 100G}
Ambient temperature
Operating: -30°C to 80°C (with no icing)
Storage: -30°C to 100°C (with no icing)
Approved standards
UL508 File No. E64562
CSA C22.2 (No. 14, No. 950) File No. LR35535
TÜV File No. R9650094 (EN60950)
Ambient humidity
Weight
Operating: 45% to 85%
Approx. 18 g
852
Solid State Relay G3R-I/O
ꢀ Output Module
Item
G3R-OA202SZN
G3R-OA202SLN
G3R-ODX025N
1 ms max.
G3R-OA201SN
Operate time
1/2 of load power source cycle + 1 ms max.
1/2 of load power source cycle + 1 ms max.
20 Hz
Release time
2 ms max.
100 Hz
Response frequency
Output ON voltage drop
Leakage current
1.6 V max.
2.5 V max.
1.5 mA max.
1 mA max.
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
Ambient temperature
100 MΩ min. between input and output
4,000 VAC, 50/60 Hz for 1 min. between input and output
10 to 55 Hz, 1.5-mm double amplitude
1,000 m/s2 {approx. 100G}
Operating: -30°C to 80°C (with no icing)
Storage: -30°C to 100°C (with no icing)
Approved standards
UL508 File No. E64562
CSA C22.2 (No. 14, No. 950) File No. LR35535
TÜV File No. R9650094 (EN60950)
Ambient humidity
Weight
Operating: 45% to 85%
Approx. 18 g
Engineering Data
Load Current vs. Ambient Temperature
Characteristics
G3R-OA202SZN/OA202SLN
G3R-ODX02SN (4 to 60 VDC)
G3R-OD201SN (40 to 200 VAC)
4-point mounting (see note 1)
2
4-point mounting (see note 1)
2
2
4-point mounting (see note 1)
1.5
16-point mounting (see note 2)
1.5
1.4
16-point mounting (see note 2)
1.5
1.4
1.1
1
Single-point
mounting
Single-point
mounting
1
1
0.7
0.5
Single-point
mounting
0.6
0.5
16-point
mounting
(see note 2)
0.5
--30 --20
0
20
40 55 60
80
100
--30--20
0
20
40 55 60
80
100
-- 3 0 --20
0
20 30 40 55 60
80
100
Ambient temperature (°C)
Ambient temperature (°C)
Ambient temperature (°C)
Note: 1. When G730-Z0M04-B is mounted.
2. When G70A-Z0C16 is mounted.
Inrush Current Resistivity
Non-repetitive (Keep the inrush current to half the rated value if it occurs repetitively.)
G3R-OA202SZN/OA202SLN
G3R-ODX02SN
G3R-OD201SN
10
9
10
9
30
8
8
7
7
6
5
6
5
20
10
4
3
2
1
4
3
2
1
0
0
10
30 50 100 200 5001000
5000
10
30 50 100
300 500 1000 2000
10
30 50 100
300500 1000 2000
Energizing time (ms)
Energizing time (ms)
Energizing time (ms)
Solid State Relay G3R-I/O
853
Operation
ꢀ Precaution of Mounting Output Modules
With up to four G3R SSRs mounted closely and
side by side, 2-A loads can be switched.
With a G3R SSRs mounted every other slot,
2-A loads can be switched.
G3R
G3R
G3R
Dimensions
Unit: mm (inch)
ꢀ G3R
Terminal arrangement/
Internal connections
(Bottom view)
1
5.2
3
4
9.6
3
(+)
0.5
29 max.
(--)
17.4
4
4.75
Load
1
5
13 max.
5
7.5
28 max.
4.7
0.5
4.75
Input
4
1
5
10
(--)
(+)
2
20
ꢀ Connecting Sockets
P2RF-05-E
G3R I/O Relay
59 max.
48 max.
M3.5 screw
PFRF-05-E
Socket
3.2-dia. hole
3.5-dia.
hole
62.5 **
(66.5)***
85.5 max.
M3 or 3.5-dia. hole
** Indicates a value when using the PFP-❏N
Supporting Rail with the P2RF-05-E
61 max.
The value is 71.5 when using the PFP-❏N2.
*** Indicates a value when using the PFP-❏N
Supporting Rail with the P2RF-08-E
The value is 75.5 when using the PFP-❏N2.
854
Solid State Relay G3R-I/O
P2R-057P
14 max.
Five, 1.6-dia. hole
G3R I/O Relay
32 max.
P2R-057P Socket
41 max.
ꢀ Socket Mounting Plate
Use the Socket Mounting Plate when arranging several Sockets in a row.
R2.25
10 ellipses
Square hole
ꢀ Approvals
UL (File No. E64562)/CSA (File No. LR35535)
Model G3R-
Module type
Rating
IAZR1SN
Input
100 to 240 VAC
IDZR1SN
Input
5 VDC, 12 to 24 VDC
5 VDC, 12 to 24 VDC
5 to 24 VDC
IDZR1SN-1
OA202SZN
OA202SLN
ODX02SN
OD201SN
Input
Output
Output
Output
Output
5 to 24 VDC
5 to 24 VDC
5 to 24 VDC
Model G3R-
Module type
Output rating
IAZR1SN
Input
Input
Input
Output
32 VDC, 100 mA (General Purpose)
32 VDC, 100 mA (General Purpose)
32 VDC, 100 mA (General Purpose)
264 VAC, 2 A (General Purpose)
264 VAC, 1 A (Tungsten)
IDZR1SN
IDZR1SN-1
OA202SZN
264 VAC, 1 A FLA, 6 A LRA
264 VAC, 2 A (General Purpose)
264 VAC, 1 A (Tungsten)
OA202SLN
Output
264 VAC, 1 A FLA, 6 A LRA
60 VDC, 2 A (General Purpose)
60 VDC, 1 A (Tungsten)
ODX02SN
OD201SN
Output
Output
200 VDC, 1.5 A (General Purpose)
200 VDC, 0.75 A (Tungsten)
Solid State Relay G3R-I/O
855
Precautions
See Technical Information section at the front of the Solid State Relay section of this catalog for solid state precautions.
ꢀ Connection
With the SSR for DC switching, the load can be connected to either
positive or negative output terminal of the SSR.
ꢀ Protective element
Since the SSR does not incorporate an overvoltage absorption com-
ponent, be sure to connect an overvoltage absorption component
when using the SSR under an inductive load.
856
Solid State Relay G3R-I/O
MEMO
Solid State Relay G3R-I/O
857
Terms and Conditions of Sale
1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed 12. Warranties. (a) Exclusive Warranty. Seller's exclusive warranty is that the
part of all quotations, acknowledgments, invoices, purchase orders and other
documents, whether electronic or in writing, relating to the sale of products or
services (collectively, the "Products") by Omron Electronic Components LLC
("Seller"). Seller hereby objects to any terms or conditions proposed in
Buyer's purchase order or other documents which are inconsistent with, or in
addition to, these Terms.
Products will be free from defects in materials and workmanship for a period of
twelve months from the date of sale by Seller (or such other period expressed
in writing by Seller). Seller disclaims all other warranties, express or implied.
(b) Limitations. SELLER MAKES NO WARRANTY OR REPRESENTATION,
EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL-
ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS.
BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR
INTENDED USE. Seller further disclaims all warranties and responsibility of
any type for claims or expenses based on infringement by the Products or oth-
erwise of any intellectual property right. (c) Buyer Remedy. Seller's sole obli-
gation hereunder shall be to replace (in the form originally shipped with Buyer
responsible for labor charges for removal or replacement thereof) the non-
complying Product or, at Seller's election, to repay or credit Buyer an amount
equal to the purchase price of the Product; provided that in no event shall
Seller be responsible for warranty, repair, indemnity or any other claims or
expenses regarding the Products unless Seller's analysis confirms that the
Products were properly handled, stored, installed and maintained and not sub-
ject to contamination, abuse, misuse or inappropriate modification. Return of
any Products by Buyer must be approved in writing by Seller before shipment.
Seller shall not be liable for the suitability or unsuitability or the results from the
use of Products in combination with any electrical or electronic components,
circuits, system assemblies, or any other materials or substances or environ-
ments. Any advice, recommendations or information given orally or in writing
are not to be construed as an amendment or addition to the above warranty.
2. Prices; Payment. All prices stated are current, subject to change without
notice by Seller. Buyer agrees to pay the price in effect at time of shipment.
Payments for Products received are due net 30 days unless otherwise stated
in the invoice.
3. Discounts. Cash discounts, if any, will apply only on the net amount of
invoices sent to Buyer after deducting transportation charges, taxes and
duties, and will be allowed only if (i) the invoice is paid according to Seller's
payment terms and (ii) Buyer has no past due amounts owing to Seller.
4. Currencies. If the prices quoted herein are in a currency other than U.S. dol-
lars, Buyer shall make remittance to Seller at the then current exchange rate
most favorable to Seller and which is available on the due date; provided that if
remittance is not made when due, Buyer will convert the amount to U.S. dol-
lars at the then current exchange rate most favorable to Seller available during
the period between the due date and the date remittance is actually made.
5. Governmental Approvals. Buyer shall be responsible for, and shall bear all
costs involved in, obtaining any government approvals required for the impor-
tation or sale of the Products.
6. Taxes. All taxes, duties and other governmental charges (other than general
real property and income taxes), including any interest or penalties thereon,
imposed directly or indirectly on Seller or required to be collected directly or 13. Limitation on Liability; Etc. SELLER SHALL NOT BE LIABLE FOR SPECIAL,
indirectly by Seller for the manufacture, production, sale, delivery, importation,
consumption or use of the Products sold hereunder (including customs duties
and sales, excise, use, turnover and license taxes) shall be charged to and
remitted by Buyer to Seller.
INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CON-
NECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN
CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in
no event shall liability of Seller exceed the individual price of the Product on
which liability is asserted.
7. Financial. If the financial position of Buyer at any time becomes unsatisfactory
to Seller, Seller reserves the right to stop shipments or require satisfactory
security or payment in advance. If Buyer fails to make payment or otherwise 14. Indemnities. Buyer shall indemnify and hold harmless Seller, its affiliates and
comply with these Terms or any related agreement, Seller may (without liability
and in addition to other remedies) cancel any unshipped portion of Products
sold hereunder and stop any Products in transit until Buyer pays all amounts,
including amounts payable hereunder, whether or not then due, which are
owing to it by Buyer. Buyer shall in any event remain liable for all unpaid
accounts.
its employees from and against all liabilities, losses, claims, costs and
expenses (including attorney's fees and expenses) related to any claim, inves-
tigation, litigation or proceeding (whether or not Seller is a party) which arises
or is alleged to arise from Buyer's acts or omissions under these Terms or in
any way with respect to the Products. Without limiting the foregoing, Buyer (at
its own expense) shall indemnify and hold harmless Seller and defend or settle
any action brought against Seller to the extent that it is based on a claim that
any Product made to Buyer specifications infringed intellectual property rights
of another party.
8. Cancellation; Etc. Orders are not subject to rescheduling or cancellation
unless Buyer indemnifies Seller fully against all costs or expenses arising in
connection therewith.
9. Force Majeure. Seller shall not be liable for any delay or failure in delivery 15. Property; Confidentiality. The intellectual property embodied in the Products is
resulting from causes beyond its control, including earthquakes, fires, floods,
strikes or other labor disputes, shortage of labor or materials, accidents to
machinery, acts of sabotage, riots, delay in or lack of transportation or the
requirements of any government authority.
the exclusive property of Seller and its affiliates and Buyer shall not attempt to
duplicate it in any way without the written permission of Seller. Notwithstand-
ing any charges to Buyer for engineering or tooling, all engineering and tooling
shall remain the exclusive property of Seller. All information and materials sup-
plied by Seller to Buyer relating to the Products are confidential and propri-
etary, and Buyer shall limit distribution thereof to its trusted employees and
strictly prevent disclosure to any third party.
10. Shipping; Delivery. Unless otherwise expressly agreed in writing by Seller:
1. Shipments shall be by a carrier selected by Seller;
2. Such carrier shall act as the agent of Buyer and delivery to such carrier
shall constitute delivery to Buyer;
16. Miscellaneous. (a) Waiver. No failure or delay by Seller in exercising any right
and no course of dealing between Buyer and Seller shall operate as a waiver
of rights by Seller. (b) Assignment. Buyer may not assign its rights hereunder
without Seller's written consent. (c) Law. These Terms are governed by Illi-
nois law (without regard to conflict of law principles). Federal and state courts
in Illinois shall have exclusive jurisdiction for any dispute hereunder.
(d) Amendment. These Terms constitute the entire agreement between Buyer
and Seller relating to the Products, and no provision may be changed or
waived unless in writing signed by the parties. (e) Severability. If any provision
hereof is rendered ineffective or invalid, such provision shall not invalidate any
other provision. (f) Setoff. Buyer shall have no right to set off any amounts
against the amount owing in respect of this invoice.. (g) Definitions. As used
herein, "including" means "including without limitation".
3. All sales and shipments of Products shall be FOB shipping point (unless
otherwise stated in writing by Seller), at which point title to and all risk of
loss of the Products shall pass from Seller to Buyer, provided that Seller
shall retain a security interest in the Products until the full purchase price is
paid by Buyer;
4. Delivery and shipping dates are estimates only.
5. Seller will package Products as it deems proper for protection against
normal handling and extra charges apply to special conditions.
11. Claims. Any claim by Buyer against Seller for shortage or damage to the
Products occurring before delivery to the carrier must be presented in writing
to Seller within 30 days of receipt of shipment and include the original trans-
portation bill signed by the carrier noting that the carrier received the Products
from Seller in the condition claimed.
Certain Precautions on Specifications and Use
1. Suitability for Use. Seller shall not be responsible for conformity with any stan- 2. Programmable Products. Seller shall not be responsible for the user's
dards, codes or regulations which apply to the combination of the Product in
programming of a programmable product, or any consequence thereof.
Buyer's application or use of the Product. At Buyer's request, Seller will pro- 3. Performance Data. Performance data given in this publication is provided as a
vide applicable third party certification documents identifying ratings and limita-
tions of use which apply to the Product. This information by itself is not
sufficient for a complete determination of the suitability of the Product in combi-
nation with the end product, machine, system, or other application or use.
guide for the user in determining suitability and does not constitute a warranty
It may represent the result of Seller's test conditions, and the users must corre
late it to actual application requirements. Actual performance is subject to
Seller's Warranty and Limitations of Liability.
Buyer shall be solely responsible for determining appropriateness of the partic- 4. Change in Specifications. Product specifications and accessories may be
ular Product with respect to Buyer's application, product or system. Buyer
shall take application responsibility in all cases but the following is a non-
exhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii)Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety
equipment, and installations subject to
changed at any time based on improvements and other reasons. It is our prac
tice to change part numbers when published ratings or features are changed
or when significant construction changes are made. However, some specifica
tions of the Product may be changed without any notice. When in doubt, spe
cial part numbers may be assigned to fix or establish key specifications for you
application. Please consult with your Seller representative at any time to con
firm actual specifications of purchased Product.
5. Errors and Omissions. The information in this publication has been carefully
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors, or omissions.
6. RoHS Compliance. Where indicated, our products currently comply, to the bes
of our knowledge as of the date of this publication, with the requirements of the
European Union's Directive on the Restriction of certain Hazardous Sub
stances ("RoHS"), although the requirements of RoHS do not take effect unti
July 2006. These requirements may be subject to change. Please consult ou
website for current information.
separate industry or government regulations.
(iii)Use in consumer products or any use in significant quantities.
(iv)Systems, machines and equipment that could present a risk to life or
property. Please know and observe all prohibitions of use applicable to this
product.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT
THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE
INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website
at www.components.omron.com – under the “About Us” tab, in the Legal Matters section.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.components.omron.com
Canada - http://www.omron.ca
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
OMRON CANADA, INC.
885 Milner Avenue
Toronto, Ontario M1B 5V8
416-286-6465
847-882-2288
Cat. No. JB301-E3-01
3/05
Specifications subject to change without notice
Printed in USA
相关型号：
©2020 ICPDF网 联系我们和版权申明