G6A-234P-ST-US-DC48 [OMRON]
Power/Signal Relay, DPDT, Momentary, 0.005A (Coil), 48VDC (Coil), 235mW (Coil), 1A (Contact), 30VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount,;
| 型号： | G6A-234P-ST-US-DC48 |
| 厂家： | 
OMRON ELECTRONICS LLC |
| 描述： | Power/Signal Relay, DPDT, Momentary, 0.005A (Coil), 48VDC (Coil), 235mW (Coil), 1A (Contact), 30VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, 光电二极管 |
| 文件： | 总10页 (文件大小：245K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
GLow6SigAnal Relay
• High sensitivity — can be driven by digital circuits.
• Low-profile design allows use in 12.70 mm (0.50 in) PC
board rack.
• Surge withstand voltage meets FCC Part 68 regulation.
• Units can be mounted side by side due to low magnetic
leakage.
• Special models available for ultrasonic cleaning and low
thermoelectromotive force.
• Unique moving loop (permanent magnet) armature reduc-
es relay size, magnetic interference, and contact bounce
time.
• Single or dual coil winding types available.
Ordering Information
To Order: Select the part number and add the desired coil voltage rating, (e.g., G6A-274P-ST-US-DC12).
■ Non-latching
Type
Contact form
Model
AgPd (Au clad)
G6A-234P-ST-US
Ag (Au clad)
G6A-274P-ST-US
Standard
DPDT
4PDT
DPDT
4PDT
DPDT
4PDT
G6A-434P-ST-US
G6A-474P-ST-US
High-sensitivity
Low-sensitivity
G6A-234P-ST15-US
G6A-434P-ST20-US
G6A-234P-ST40-US
G6A-434P-ST40-US
G6A-274P-ST15-US
G6A-474P-ST20-US
G6A-274P-ST40-US
G6A-474P-ST40-US
■ Latching
Single Coil
Type
Contact form
Contact form
Model
AgPd (Au clad)
Ag (Au clad)
Standard
DPDT
4PDT
G6AU-234P-ST-US
G6AU-434P-ST-US
G6AU-274P-ST-US
G6AU-474P-ST-US
Dual Coil
Type
Model
AgPd (Au clad)
Ag (Au clad)
Standard
DPDT
4PDT
DPDT
4PDT
G6AK-234P-ST-US
G6AK-434P-ST-US
G6AK-234P-ST40-US
G6AK-434P-ST40-US
G6AK-274P-ST-US
G6AK-474P-ST-US
G6AK-274P-ST40-US
G6AK-474P-ST40-US
Low-sensitivity
Note: Other options available for ST10 ultra high reliability, high temperature 85°C (185° F), ST1 reverse coil polarity, BS British standard. Contact
your OMRON sales representative for details.
Low Signal Relay G6A
1
Specifications
■ Contact Data
Type
G6A-234P-ST(15,40)-US, G6A-434P-ST(20,40)-US
G6AK-234P-ST(40)-US, G6AK-434P-ST(40)-US
G6AU-234P-ST-US, G6AU-434P-ST-US
G6A-274P-ST(15,40)-US, G6A-474P-ST(20,40)-US
G6AK-274P-ST(40)-US, G6AK-474P-ST(40)-US
G6AU-274P-ST-US, G6AU-474P-ST-US
Load
Resistive load (p.f. = 1)
Inductive load (p.f. = 0.4)
(L/R = 7 ms)
Resistive load (p.f. = 1)
Inductive load (p.f. = 0.4)
(L/R = 7 ms)
Rated load
0.30 A at 125 VAC,
1 A at 30 VDC
0.20 A at 125 VAC,
0.50 A at 30 VDC
0.50 A at 125 VAC,
2 A at 30 VDC
0.25 A at 125 VAC,
1 A at 30 VDC
Contact material
AgPd (Au clad)
AgPd (Au clad)
3 A
Ag (Au clad)
3 A
Ag (Au clad)
3 A
Carry current
3 A
Max. operating voltage
Max. operating current
250 VAC, 220 VDC
2 A
250 VAC, 220 VDC
1 A
250 VAC, 220 VDC
2 A
250 VAC, 220 VDC
1 A
Max. switching capacity 125 VA, 60 W
62.50 VA, 30 W
10 µA, 10 mVDC
125 VA, 60 W
10 µA, 10 mVDC
62.50 VA, 30 W
10 µA, 10 mVDC
Min. permissible load
10 µA, 10 mVDC
■ Coil Data
Standard Non-latching DPDT (G6A-234P-ST-US, G6A-274P-ST-US)
Rated
voltage
(VDC)
Rated
current
(mA)
Coil
resistance
(Ω)
Coil inductance
(ref. value) (H)
Pick-up
voltage
Dropout
voltage
Maximum
voltage
Power
consumption
(mW)
Armature
OFF
Armature
ON
% of rated voltage
3
66.70
45
0.07
0.20
0.29
0.63
1.10
4.50
0.07
70% max.
10% min.
200%
at 23°C
(73°F)
Approx. 200
5
40
125
0.18
0.26
0.57
1.06
4.10
12.50
6
33.30
22.20
16.70
8.30
4.90
180
9
405
150%
at 70°C
(158°F)
12
24
48
720
2,880
9,750
13.70
Approx. 235
High-sensitivity Non-latching DPDT (G6A-234P-ST15-US, G6A-274P-ST15-US)
Rated
voltage
(VDC)
Rated
current
(mA)
Coil
resistance
(Ω)
Coil inductance
(ref. value) (H)
Pick-up
voltage
Dropout
Maximum
voltage
Power
consumption
(mW)
voltage
Armature
OFF
Armature
ON
% of rated voltage
1.50
100
15
0.02
0.09
0.22
0.25
0.35
0.80
1.35
5.60
0.02
80% max.
10% min.
200%
Approx. 150
3
50
60
0.08
0.20
0.21
0.31
0.70
1.25
5.10
20.00
4.50
5
33.30
30
135
167
6
25
240
9
16.70
12.50
6.30
3.20
540
12
24
48
960
3,840
15,000
22.50
Note: The rated current and coil resistance are measured at a coil temperature of 23° C (73°F) with a tolerance of 10%.
2
Low Signal Relay G6A
Low-sensitivity Non-latching DPDT (G6A-234P-ST40-US, G6A-274P-ST40-US)
Rated
voltage
(VDC)
Rated
current
(mA)
Coil
resistance
(Ω)
Coil inductance
(ref. value) (H)
Pick-up
voltage
Dropout
voltage
Maximum
voltage
Power
consumption
(mW)
Armature
OFF
Armature
ON
% of rated voltage
3
133.30
22.50
0.03
0.08
0.11
0.27
0.52
2.10
7.50
0.02
70% max.
10% min.
150%
at 23°C
(73°F)
Approx. 400
5
80
62.50
90
0.07
0.10
0.23
0.43
1.80
6.40
6
66.70
44.30
33.30
16.70
8.30
9
203
12
24
48
360
110%
at 70°C
(158°F)
1,440
5,760
Standard Non-latching 4PDT (G6A-434P-ST-US, G6A-474P-ST-US)
Rated
voltage
(VDC)
Rated
current
(mA)
Coil
resistance
(Ω)
Coil inductance
(ref. value) (H)
Pick-up
voltage
Dropout
Maximum
voltage
Power
consumption
(mW)
voltage
Armature
OFF
Armature
ON
% of rated voltage
3
120
25
0.05
0.14
0.20
0.45
0.80
3.20
0.05
70% max.
10% min.
150%
at 23°C
(73°F)
Approx. 360
5
72.50
60
69
0.12
0.17
0.38
0.68
2.70
10.90
6
100
9
40
225
12
24
48
30
400
110%
at 70°C
(158°F)
15
1,600
6,400
7.50
12.80
High-sensitivity Non-latching 4PDT (G6A-434P-ST20-US, G6A-474P-ST20-US)
Rated
voltage
(VDC)
Rated
current
(mA)
Coil
resistance
(Ω)
Coil inductance
(ref. value) (H)
Pick-up
voltage
Dropout
Maximum
voltage
Power
consumption
(mW)
voltage
Armature
OFF
Armature
ON
% of rated voltage
3
66.70
45
--
--
--
--
--
--
--
--
--
--
--
--
--
--
70% max.
10% min.
200%
at 50°C
(122°F)
Approx. 200
5
40
125
6
33.30
22.20
16.70
8.30
4.20
180
9
405
12
24
48
720
2,880
11,520
Low-sensitivity Non-latching 4PDT (G6A-434P-ST40-US, G6A-474P-ST40-US)
Rated
voltage
(VDC)
Rated
current
(mA)
Coil
resistance
(Ω)
Coil inductance
(ref. value) (H)
Pick-up
voltage
Dropout
Maximum
voltage
Power
consumption
(mW)
voltage
Armature
OFF
Armature
ON
% of rated voltage
3
133.30
22.50
0.04
0.12
0.17
0.42
0.70
2.80
0.02
70% max.
10% min.
150%
at 23°C
(73°F)
Approx. 400
5
80
62.50
90
0.09
0.13
0.30
0.52
2.20
8.60
6
66.70
44.30
33.30
16.70
8.30
9
203
12
24
48
360
110%
at 70°C
(158°F)
1,440
5,760
10.20
Note: The rated current and coil resistance are measured at a coil temperature of 23°C (73° F) with a tolerance of 10%.
Low Signal Relay G6A
3
Standard Single Coil Latching DPDT (G6AU-234P-ST-US, G6AU-274P-ST-US)
Rated
voltage
(VDC)
Rated
current
(mA)
Coil
resistance
(Ω)
Coil inductance
(ref. value) (H)
Set pick-up Resetpick-up
Maximum
voltage
Power
consumption
(mW)
voltage
voltage
Armature
OFF
Armature
ON
% of rated voltage
3
33.70
89
0.15
0.44
0.64
1.38
2.50
9.20
0.11
70% max.
70% min.
200%
at 23°C
(73°F)
Approx. 100
5
20
250
0.35
0.48
1.07
2
6
16.70
11.10
8.30
4.20
2.50
360
9
810
12
24
48
1,440
5,760
19,000
150%
at 70°C
(158°F)
7.20
22
28.50
Approx. 120
Standard Dual Coil Latching (G6AK-234P-ST-US, G6AK-274P-ST-US)
Rated
voltage current resistance
(VDC) (mA) (Ω)
Rated
Coil
Coil inductance
(ref. value) (H)
Set
pick-up
voltage
Reset
pick-up
voltage
Maximum
voltage
Power
consumption
(mW)
Set coil
Reset coil
Armature Armature Armature Armature
OFF ON OFF ON
% of rated voltage
3
66.70
45
0.04 0.03 0.03 0.04
70% max.
70% min.
200%
at 23°C
(73°F)
Approx. 200
Approx. 180
5
36
139
200
450
800
0.11
0.16
0.38
0.60
2.10
8.50
0.08
0.12
0.28
0.45
1.50
6.30
0.08
0.12
0.28
0.45
1.50
6.30
0.11
0.16
0.38
0.60
2.10
8.50
6
30
9
20
12
24
48
15
150%
at 70°C
(158°F)
7.50
4.20
3,200
11,520
Approx. 200
Dual Coil Latching Low-sensitivity DPDT (G6AK-234P-ST40-US, G6AK-274P-ST40-US)
Rated
voltage current resistance
(VDC) (mA) (Ω)
Rated
Coil
Coil inductance
(ref. value) (H)
Set
Reset
pick-up
voltage
Maximum
voltage
Power
consumption
(mW)
pick-up
voltage
Set coil
Armature Armature Armature Armature
OFF ON OFF ON
0.02 0.01 0.01 0.02
Reset coil
% of rated voltage
3
120
25
70% max.
70% min.
150%
at 23°C
(73°F)
Approx. 360
5
72.50
60
69
0.05
0.07
0.16
0.28
1.10
4
0.04
0.05
0.12
0.20
0.75
2.90
0.04
0.05
0.12
0.20
0.75
2.9
0.05
0.07
0.16
0.28
1.10
4
6
100
225
400
9
40
12
24
48
30
110%
at 70°C
(158°F)
15
1,600
6,400
7.50
Standard Single Coil Latching 4PDT (G6AU-434P-ST-US, G6AU-474P-ST-US)
Rated
voltage
(VDC)
Rated
current
(mA)
Coil
resistance
(Ω)
Coil inductance
(ref. value) (H)
Set pick-up Resetpick-up
Maximum
voltage
Power
consumption
(mW)
voltage
voltage
Armature
OFF
Armature
ON
% of rated voltage
3
106.80
28.10
0.03
0.08
0.11
0.25
0.45
1.80
7.00
0.02
70% max.
70% min.
150%
at 23°C
(73°F)
Approx. 320
5
64
78.10
112.50
253
0.06
0.08
0.18
0.32
1.30
5.20
6
53.30
35.60
26.70
13.30
6.70
9
12
24
48
450
110%
at 70°C
(158°F)
1,800
7,200
4
Low Signal Relay G6A
Standard Dual Coil Latching 4PDT (G6AK-434P-ST-US, G6AK-474P-ST-US
Rated
voltage current resistance
(VDC) (mA) (Ω)
Rated
Coil
Coil inductance
(ref. value) (H)
Set
pick-up
voltage
Reset
pick-up
voltage
Maximum
voltage
Power
consumption
(mW)
Set coil
Reset coil
Armature Armature Armature Armature
OFF ON OFF ON
% of rated voltage
3
5
6
9
106.80 28.10
0.03 0.02 0.02 0.03
70% max.
70% min.
150%
at 23°C
(73°F)
Approx. 320
64
78.10
112.50
253
0.08
0.11
0.25
0.45
1.80
7.00
0.06
0.08
0.18
0.32
1.30
5.20
0.06
0.08
0.18
0.32
1.30
5.20
0.08
0.11
0.25
0.45
1.80
7.00
53.30
35.60
26.70
13.30
6.70
12
24
48
450
110%
at 70°C
(158°F)
1,800
7,200
Dual Coil Latching Low-sensitivity 4PDT (G6AK-434P-ST40-US, G6AK-474P-ST40-US)
Rated
voltage current resistance
(VDC) (mA) (Ω)
Rated
Coil
Coil inductance
(ref. value) (H)
Set
Reset
pick-up
voltage
Maximum
voltage
Power
consumption
(mW)
pick-up
voltage
Set coil
Armature Armature Armature Armature
OFF ON OFF ON
0.02 0.02 0.02 0.02
Reset coil
% of rated voltage
3
5
6
9
120
25
70% max.
70% min.
150%
at 23°C
(73°F)
Approx. 360
72.50
60
69
0.07
0.09
0.18
0.30
1.20
4.40
0.05
0.08
0.14
0.23
0.82
3.20
0.05
0.08
0.14
0.23
0.82
3.20
0.07
0.09
0.18
0.30
1.20
4.40
100
225
400
40
12
24
48
30
110%
at 70°C
(158°F)
15
1,600
6,400
7.50
Note: The rated current and coil resistance are measured at a coil temperature of 23°C (73° F) with a tolerance of 10%.
Low Signal Relay G6A
5
■ Characteristics
Type
Non-latching
Latching
Contact resistance
50 mΩ max.
Operate (set) time
Release (reset) time
Bounce time
DPDT
5 ms max. (mean value approx. 3 ms)
7 ms max. (mean value approx 3.80 ms)
3 ms max. (mean value approx. 1.20 ms)
5 ms max. (mean value approx. 1.30 ms)
Actual value approx. 0.50 ms
5 ms max. (mean value approx. 2.50 ms)
7 ms max. (mean value approx. 3.30 ms)
5 ms max. (mean value approx. 2.50 ms)
7 ms max. (mean value approx. 2.70 ms)
4PDT
DPDT
4PDT
Operate
Release
Mechanical
Electrical
Actual value approx. 0.50 ms
Operating frequency
36,000 operations/hour
1,800 operations/hour (under rated load)
1,000 MΩ min. (at 500 VDC)
Insulation resistance
Dielectric strength
1,000 VAC, 50/60 Hz for 1 minute between coil and contacts
1,000 VAC, 50/60 Hz for 1 minute between contacts of different poles
1,000 VAC, 50/60 Hz for 1 minute between contacts of same pole
250 VAC, 50/60 Hz for 1 minute between set and reset coils
1,500 V 10 x 16 µs (conforms to FCC Part 68)
10 to 55 Hz; 5 mm (0.20 in) double amplitude
10 to 55 Hz; 3.3 mm (0.13 in) double amplitude
1,000 m/s2 (Approx. 100G
Surge withstand voltage
Vibration
Mechanical durability
Malfunction durability
Mechanical durability
Malfunction durability
Shock
DPDT: 500 m/s2 (Approx. 50 G); 4PDT: 300 m/s2 (Approx. 30 G)
Ambient temperature
Humidity
-40° to 70°C (-40° to 158°F)
45% to 85% RH
Service life
Mechanical
Electrical
DPDT
100 million operations min. (at 36,000 operations/hour)
See “Characteristic Data”
Weight
Approx. 3.5 g (0.12 oz)
4PDT
Approx. 6.0 g (0.21 oz)
Note: Data shown are of initial value.
■ Characteristic Data
Maximum Switching CapacityAmbient Temperature vs. Electrical Service Life
DPDT
Maximum Voltage (reference only) DPDT
6
Low Signal Relay G6A
Dimensions
Unit: mm (inch)
■ Non-latching
G6A-234P-ST(15,40)-US, G6A-274P-ST(15,40)-US
Terminal arrangement/
Internal connections
(Bottom view)
Mounting holes
(Bottom view)
G6A-434P-ST(20,40)-US, G6A-474P-ST(20,40)-US
Terminal arrangement/
Internal connections
(Bottom view)
Mounting holes
(Bottom view)
■ Latching
G6AU-234P-ST-US, G6AU-274P-ST-US
Terminal arrangement/
Internal connections
(Bottom view)
Mounting holes
(Bottom view)
G6AK-234P-ST(40)-US, G6AK-274P-ST(40)-US
Terminal arrangement/
Internal connections
(Bottom view)
Mounting holes
(Bottom view)
Low Signal Relay G6A
7
G6AU-434P-ST-US, G6AU-474P-ST-US
Terminal arrangement/
Internal connections
(Bottom view)
Mounting holes
(Bottom view)
G6AK-434P-ST(40)-US, G6AK-474P-ST(40)-US
Terminal arrangement/
Internal connections
(Bottom view)
Mounting holes
(Bottom view)
Note:
and
indicate mounting orientation marks.
■ Approvals
UL (File No. E41515)/CSA (File No. LR24825)
Type
G6A-234P-ST-US
G6A-234P-ST40-US
G6A-234P-ST15-US
G6A-274P-ST-US
Contact form
DPDT
Coil rating
1 to 48 VDC
Contact ratings
0.60 A, 125 VAC
1 A, 30 VDC
0.60 A, 110 V+DC
0.60 A, 125 VAC
2 A, 30 VDC
G6A-274P-ST40-US
G6A-274P-ST15-US
0.60 A, 110 V
G6A-434P-ST-US
G6A-434P-ST20-US
G6A-434P-ST40-US
4PDT
DPDT
4PDT
1 to 48 VDC
1 to 48 VDC
1 to 48 VDC
0.60 A, 125 VAC
1 A, 30 VDC
0.60 A, 110 V
G6A-474P-ST-US
0.60 A, 125 VAC
2 A, 30 VDC
0.60 A, 110 V
0.60 A, 125 VAC
1 A, 30 VDC
G6A-474P-ST20-US
G6A-474P-ST40-US
G6AK-234P-ST(40)-US
G6AU-234P-ST-US
0.60 A, 110 V
G6AK-274P-ST(40)-US
G6AU-274P-ST-US
0.60 A, 125 VAC
2 A, 30 VDC
0.60 A, 110 V
G6AK-434P-ST(40)-US
G6AU-434P-ST(40)-US
0.60 A, 125 VAC
1 A, 30 VDC
0.60 A, 110 V
0.60 A, 125 VAC
2 A, 30 VDC
G6AK-474P-ST(40)-US
G6AU-474P-ST(40)-US
0.60 A, 110 V
Note: 1. The rated values approved by each of the safety standards (e.g., UL and CSA) may be different from the performance characteristics
individually defined in this catalog.
2. In the general interest of product improvement, specifications are subject to change.
3. UL1950 recognition.
8
Low Signal Relay G6A
(c) Energy control systems, combustion systems, railroad systems, aviation systems,
medical equipment, amusement machines, vehicles, safety equipment, and
installations subject to separate industry or government regulations.
(d) Systems, machines, and equipment that could present a risk to life or property.
3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING
SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE
PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE
WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
Omron Electronic Components, LLC
Terms and Conditions of Sales
I. GENERAL
1. Definitions: The words used herein are defined as follows.
(a) Terms:
(b) Seller:
(c) Buyer:
These terms and conditions
Omron Electronic Components LLC and its subsidiaries
The buyer of Products, including any end user in section III through VI
(d) Products: Products and/or services of Seller
4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED
VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY
SELLER.
(e) Including: Including without limitation
2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments,
invoices, purchase orders and other documents, whether electronic or in writing, relating
to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's
purchase order or other documents which are inconsistent with, or in addition to, these
Terms.
5. Programmable Products: Seller shall not be responsible for the Buyer's programming of
a programmable Product.
IV. WARRANTY AND LIMITATION
3. Distributor: Any distributor shall inform its customer of the contents after and including
1. Warranty: Seller's exclusive warranty is that the Products will be free from defects in
materials and workmanship for a period of twelve months from the date of sale by Seller
(or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY
OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES,
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE OF THE PRODUCTS.
section III of these Terms.
II. SALES
1. Prices; Payment: All prices stated are current, subject to change without notice by Seller.
Buyer agrees to pay the price in effect at time of shipment. Payments for Products
received are due net 30 days unless otherwise stated in the invoice. Buyer shall have no
right to set off any amounts against the amount owing in respect of this invoice.
2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to
Buyer after deducting transportation charges, taxes and duties, and will be allowed only
if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past
due amounts owing to Seller.
2. Buyer Remedy: Seller's sole obligation hereunder shall be to replace (in the form
originally shipped with Buyer responsible for labor charges for removal or replacement
thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an
amount equal to the purchase price of the Product; provided that there shall be no
liability for Seller or its affiliates unless Seller's analysis confirms that the Products were
handled, stored, installed and maintained and not subject to contamination, abuse,
misuse or inappropriate modification. Return of any Products by Buyer must be
approved in writing by Seller before shipment.
3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the maximum
legal rate, whichever is less, on any balance not paid within the stated terms.
4. Orders: Seller will accept no order less than 200 U.S. dollars net billing.
5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer
shall make remittance to Seller at the then current exchange rate most favorable to
Seller; provided that if remittance is not made when due, Buyer will convert the amount
to U.S. dollars at the then current exchange rate most favorable to Seller available
during the period between the due date and the date remittance is actually made.
6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining
any government approvals regarding the importation or sale of the Products.
7. Taxes: All taxes, duties and other governmental charges (other than general real property
and income taxes), including any interest or penalties thereon, imposed directly or
indirectly on Seller or required to be collected directly or indirectly by Seller for the
manufacture, production, sale, delivery, importation, consumption or use of the Products
sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall
be charged to and remitted by Buyer to Seller.
3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED
WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT,
WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL
LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF
THE PRODUCT ON WHICH LIABILITY IS ASSERTED.
4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and its
employees from and against all liabilities, losses, claims, costs and expenses (including
attorney's fees and expenses) related to any claim, investigation, litigation or proceeding
(whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or
omissions under these Terms or in any way with respect to the Products.
V. INFORMATION; ETC.
8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to Seller,
Seller reserves the right to stop shipments or require satisfactory security or payment in
advance. If Buyer fails to make payment or otherwise comply with these Terms or any
related agreement, Seller may (without liability and in addition to other remedies) cancel any
unshipped portion of Products sold hereunder and stop any Products in transit until
Buyer pays all amounts, including amounts payable hereunder, whether or not then due,
which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid
accounts.
1. Intellectual Property: The intellectual property embodied in the Products is the exclusive
property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way
without the written permission of Seller. Buyer (at its own expense) shall indemnify and
hold harmless Seller and defend or settle any action brought against Seller to the extent
that it is based on a claim that any Product made to Buyer specifications infringed
intellectual property rights of another party.
2. Property; Confidentiality: Notwithstanding any charges to Buyer for engineering or
tooling, all engineering and tooling shall remain the exclusive property of Seller. All
information and materials supplied by Seller to Buyer relating to the Products are
confidential and proprietary, and Buyer shall limit distribution thereof to its trusted
employees and strictly prevent disclosure to any third party.
9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer
indemnifies Seller fully against all costs or expenses arising in connection therewith.
10. Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting from
causes beyond its control, including earthquakes, fires, floods, strikes or other labor
disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots,
delay in or lack of transportation or the requirements of any government authority.
11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller:
(a) All sales and shipments of Products shall be FOB shipping point (unless otherwise
stated in writing by Seller), at which point title to and all risk of loss of the Products shall
pass from Seller to Buyer, provided that Seller shall retain a security interest in the
Products until the full purchase price is paid by Buyer;
3. Performance Data: Performance data is provided as a guide in determining suitability
and does not constitute a warranty. It may represent the result of Seller's test conditions,
and the users must correlate it to actual application requirements.
4. Change In Specifications: Product specifications and description may be changed at any
time based on improvements or other reasons. It is Seller’s practice to change part
numbers when published ratings or features are changed, or when significant
engineering changes are made. However, some specifications of the Product may be
changed without any notice.
(b) Delivery and shipping dates are estimates only; and
5. Errors And Omissions: The information on Seller’s website or in other documentation
has been carefully checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
6. Export Controls: Buyer shall comply with all applicable laws, regulations and licenses
regarding (a) export of the Products or information provided by Seller; (b) sale of
Products to forbidden or other proscribed persons or organizations; (c)disclosure to
non-citizens of regulated technology or information.
(c) Seller will package Products as it deems proper for protection against normal
handling and extra charges apply to special conditions.
12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products
occurring before delivery to the carrier must be presented in detail in writing to Seller
within 30 days of receipt of shipment.
III. PRECAUTIONS
VI. MISCELLANEOUS
1. Suitability: IT IS THE BUYER’S SOLE RESPOINSIBILITY TO ENSURE THAT ANY
OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE
APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING
APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE
BUYER’S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC
COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E)
SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT.
Buyer acknowledges that it alone has determined that the Products will meet their
requirements of the intended use in all cases. Buyer must know and observe all
prohibitions of use applicable to the Product/s.
1. Waiver: No failure or delay by Seller in exercising any right and no course of dealing
between Buyer and Seller shall operate as a waiver of rights by Seller.
2. Assignment: Buyer may not assign its rights hereunder without Seller's written consent.
3. Law: These Terms are governed by Illinois law (without regard to conflict of laws). Federal
and state courts in Illinois have exclusive jurisdiction for any dispute hereunder.
4. Amendment: These Terms constitute the entire agreement between Buyer and Seller
relating to the Products, and no provision may be changed or waived unless in writing
signed by the parties.
5. Severability: If any provision hereof is rendered ineffective or invalid, such provision shall
not invalidate any other provision.
2. Use with Attention: The followings are some examples of applications for which
particular attention must be given. This is not intended to be an exhaustive list of all
possible use of any Product, nor to imply that any use listed may be suitable for any
Product:
(a) Outdoor use, use involving potential chemical contamination or electrical
interference.
(b) Use in consumer Products or any use in significant quantities.
Low Signal Relay G6A
9
Certain Precautions on Specifications and Use
1. Suitability for Use. Seller shall not be responsible for conformity with any stan- 2. Programmable Products. Seller shall not be responsible for the user's
dards, codes or regulations which apply to the combination of the Product in
programming of a programmable product, or any consequence thereof.
Buyer's application or use of the Product. At Buyer's request, Seller will pro- 3. Performance Data. Performance data given in this publication is provided as
vide applicable third party certification documents identifying ratings and limi-
tations of use which apply to the Product. This information by itself is not
sufficient for a complete determination of the suitability of the Product in com-
bination with the end product, machine, system, or other application or use.
a guide for the user in determining suitability and does not constitute a war-
ranty. It may represent the result of Seller's test conditions, and the users must
correlate it to actual application requirements. Actual performance is subject to
Seller's Warranty and Limitations of Liability.
Buyer shall be solely responsible for determining appropriateness of the par- 4. Change in Specifications. Product specifications and accessories may be
ticular Product with respect to Buyer's application, product or system. Buyer
shall take application responsibility in all cases but the following is a non-
exhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety
equipment, and installations subject to separate industry or government
regulations.
(iii) Use in consumer products or any use in significant quantities.
(iv) Systems, machines and equipment that could present a risk to life or
property. Please know and observe all prohibitions of use applicable to this
product.
changed at any time based on improvements and other reasons. It is our prac-
tice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifica-
tions of the Product may be changed without any notice. When in doubt, spe-
cial part numbers may be assigned to fix or establish key specifications for
your application. Please consult with your Seller representative at any time to
confirm actual specifications of purchased Product.
5. Errors and Omissions. The information in this publication has been carefully
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors, or omissions.
6. RoHS Compliance. Where indicated, our products currently comply, to the
best of our knowledge as of the date of this publication, with the requirements
of the European Union's Directive on the Restriction of certain Hazardous
Substances ("RoHS"), although the requirements of RoHS do not take effect
until July 2006. These requirements may be subject to change. Please consult
our website for current information.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT
THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE
INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website
at http://www.components.omron.com – under the “About Us” tab, in the Legal Matters section.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.components.omron.com
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
847-882-2288
01/07
Specifications subject to change without notice
Printed in USA
Cat. No. J01C-E-01
10
Low Signal Relay G6A
相关型号：
G6A-234P-ST-US-DC5
Power/Signal Relay, DPDT, Momentary, 0.04A (Coil), 5VDC (Coil), 200mW (Coil), 1A (Contact), 30VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount,
OMRON
G6A-234P-ST-US-DC9
Power/Signal Relay, DPDT, Momentary, 0.022A (Coil), 9VDC (Coil), 200mW (Coil), 1A (Contact), 30VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount,
OMRON
G6A-234P-ST-US12VDC
Power/Signal Relay, DPDT, Momentary, 0.017A (Coil), 12VDC (Coil), 200mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount,
OMRON
G6A-234P-ST15-US-DC1.50
Power/Signal Relay, DPDT, Momentary, 0.1A (Coil), 1.5VDC (Coil), 150mW (Coil), 1A (Contact), 30VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount
OMRON
G6A-234P-ST15-US-DC24
Power/Signal Relay, 2 Form C, DPDT, Momentary, 0.006A (Coil), 24VDC (Coil), 150mW (Coil), 1A (Contact), 30VDC (Contact), DC Input, Random, AC/DC Output, Through Hole-Straight Mount
OMRON
G6A-234P-ST15-US-DC3
Power/Signal Relay, 2 Form C, DPDT, Momentary, 0.05A (Coil), 3VDC (Coil), 150mW (Coil), 1A (Contact), 30VDC (Contact), DC Input, Random, AC/DC Output, Through Hole-Straight Mount
OMRON
G6A-234P-ST15-US-DC4.5
Electromechanical Relay, DPDT, Latched, 9VDC (Coil), 150mW (Coil), 1A (Contact), 30VDC (Contact), Random, AC/DC Output
OMRON
G6A-234P-ST15-US-DC4.50
Power/Signal Relay, DPDT, Momentary, 0.033A (Coil), 4.5VDC (Coil), 150mW (Coil), 1A (Contact), 30VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount,
OMRON
G6A-234P-ST15-US-DC48
Power/Signal Relay, 2 Form C, DPDT, Momentary, 0.003A (Coil), 48VDC (Coil), 150mW (Coil), 1A (Contact), 30VDC (Contact), DC Input, Random, AC/DC Output, Through Hole-Straight Mount
OMRON
G6A-234P-ST15-US-DC5
Power/Signal Relay, 2 Form C, DPDT, Momentary, 0.03A (Coil), 5VDC (Coil), 150mW (Coil), 1A (Contact), 30VDC (Contact), DC Input, Random, AC/DC Output, Through Hole-Straight Mount,
OMRON
©2020 ICPDF网 联系我们和版权申明