G6Z-1FE-DC3 [OMRON]
RF Relay, SPDT, Momentary, 0.067A (Coil), 3VDC (Coil), 200mW (Coil), 0.5A (Contact), 30VDC (Contact), 2600MHz, 10W (RF Input), DC Input, AC/DC Output, Surface Mount-Straight;
| 型号： | G6Z-1FE-DC3 |
| 厂家： | 
OMRON ELECTRONICS LLC |
| 描述： | RF Relay, SPDT, Momentary, 0.067A (Coil), 3VDC (Coil), 200mW (Coil), 0.5A (Contact), 30VDC (Contact), 2600MHz, 10W (RF Input), DC Input, AC/DC Output, Surface Mount-Straight 光电二极管 继电器 |
| 文件： | 总19页 (文件大小：560K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
High-frequency Relay
G6Z
Miniature 2.6-GHz-Band, SPDT,
High-frequency Relay
• Superior high-frequency characteristics include an isolation
of 30 dB min., 60-65 dB isolation at 900 MHz, insertion loss
of 0.5 dB max., and V.SWR of 1.5 max. at 2.6 GHz.
• Triplate micro stripline technology assures superior
high-frequency characteristics.
• Miniature dimensions of 20 × 8.6 × 8.9 mm (L × W × H).
• Available models include single-coil latching (200 mW), dual
coil latching (360 mW), and models with
reverse contact arrangement.
• Series includes versions with an E-shape terminal structure,
and models with a Y-shape terminal structure, allowing
greater freedom with PCB design.
• Models with 75-Ω impedance and models with
50-Ω impedance are also available.
• Surface mount relays available in tube packaging or tape-
and-reel packaging.
Ordering Information
■ Model Number Legend:
G6Z-ꢀ-ꢀꢀꢀ-ꢀꢀ
1
2
3
4
5 6
1. Relay Function
None: Non-latching
4. Terminal Structure
None: Y-shape terminal
U:
K:
Single coil latching
Dual coil latching
E:
E-shape terminal
5. Characteristic Impedance
2. Contact Form
1: SPDT
3. Terminal Shape
None: 75 Ω
A:
50 Ω
6. Contact Arrangement
F:
P:
Surface mount terminals
None: Standard contact arrangement
PCB through-hole terminals
R:
Reverse contact arrangement
198
High-frequency Relay G6Z
■ Standard Models with PCB Through-hole Terminals
Classification Structure
Contact
Terminal
Characteristic
Rated coil voltage
Model
G6Z-1PE
form
arrangement
impedance
Non-latching
Fully
sealed
SPDT
E-shape
Y-shape
E-shape
Y-shape
E-shape
Y-shape
75 Ω
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
50 Ω
75 Ω
50 Ω
75 Ω
50 Ω
75 Ω
50 Ω
75 Ω
50 Ω
75 Ω
50 Ω
G6Z-1PE-A
G6Z-1P
G6Z-1P-A
G6ZU-1PE
G6ZU-1PE-A
G6ZU-1P
Single coil
latching
G6ZU-1P-A
G6ZK-1PE
G6ZK-1PE-A
G6ZK-1P
Dual coil
latching
G6ZK-1P-A
■ Standard Models with Surface-mounting Terminals
Classification Structure
Contact
form
Terminal
arrangement
Characteristic
impedance
Rated coil voltage
Model
Non-latching
Fully
sealed
SPDT
E-shape
Y-shape
E-shape
Y-shape
E-shape
Y-shape
75 Ω
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
3, 4.5, 5, 9, 12, and 24 VDC
G6Z-1FE
50 Ω
75 Ω
50 Ω
75 Ω
50 Ω
75 Ω
50 Ω
75 Ω
50 Ω
75 Ω
50 Ω
G6Z-1FE-A
G6Z-1F
G6Z-1F-A
G6ZU-1FE
G6ZU-1FE-A
G6ZU-1F
Single coil
latching
G6ZU-1F-A
G6ZK-1FE
G6ZK-1FE-A
G6ZK-1F
Dual coil
latching
G6ZK-1F-A
Note: When ordering tape and reel packaging (surface-mount models), add “-TR” to the model number, (example: G6Z-1FE“TR”-DC12) “-TR” does
not appear on the relay itself.
Application Examples
These Relays can be used for switching signals in media equipment.
• Wire communications:
Cable TV (STB and broadcasting infrastructure), cable modems, and VRS (video response systems)
• Wireless communications:
Transceivers, ham radios, car telephones, ETC, ITS, high-level TV, satellite broadcasting, text multiplex broadcasting, pay TV, mobile phone
stations, TV broadcasting facilities, and community antenna systems
• Public equipment:
TVs, TV games, satellite radio units, car navigation systems
• Industrial equipment:
Measuring equipment, test equipment, and multiplex transmission devices
High-frequency Relay G6Z
199
Specifications
■ Contact Ratings
Load type
Resistive load
Rated load
10 mA at 30 VAC; 10 mA at 30 VDC; 10 W at 900 MHz (See note)
Rated carry current
Max. switching voltage
Max. switching current
0.5 A
30 VAC, 30 VDC
0.5 A
Note: This value is for an impedance of 50 Ω or 75 Ω with a V.SWR of 1.2 max.
■ High-frequency Characteristics
Frequency
900 MHz
2.6 GHz
Terminal type
Terminal structure
Isolation
Through hole
E-shape Y-shape
Surface mount
E-shape Y-shape
60 dB min.
Through hole
E-shape Y-shape
Surface mount
E-shape Y-shape
75 Ω
50 Ω
75 Ω
50 Ω
75 Ω
50 Ω
75 Ω
50 Ω
65 dB min.
60 dB min.
0.2 dB max.
0.1 dB max.
1.2 max.
35 dB min. 45 dB min. 30 dB min. 40 dB min.
Insertion loss (not
including substrate loss)
0.5 dB max.
0.3 dB max.
1.5 max.
V.SWR
1.1 max.
1.3 max.
Return loss
20.8 dB max.
26.4 dB max.
14.0 dB max.
17.7 dB max.
Maximum carry power
10 W (See note 2)
10 W (See note 2)
Maximum switching power
Note: 1. The above values are initial values.
2. These values are for an impedance of 50 Ω or 75 Ω with a V.SWR of 1.2 max.
200
High-frequency Relay G6Z
■ Coil Ratings
The operating characteristics are measured at a coil temperature of 23°C.
Non-latching, Standard and Reverse-contact Models
Rated
voltage
(VDC)
Rated
current
(mA)
Coil
resistance
(Ω, ±10%)
Must operate
voltage (VDC)
Must dropout
voltage (VDC)
Maximum
voltage (VDC)
at 70°C max.
Power
consumption
(mW)
3
66.7
44.4
40.0
22.2
16.7
8.3
45
2.25
0.3
4.5
Approx. 200
4.5
5
101.3
125
3.375
3.75
6.75
9
0.45
0.5
0.9
1.2
2.4
6.75
7.5
13.5
18
9
405
12
24
720.4
2880.1
18
36
Single Coil Latching Models G6ZU-1P(E), G6ZU-1F(E)
Rated
voltage
(VDC)
Rated
current
(mA)
Coil
resistance
(Ω, ±10%)
Must set
voltage (VDC)
Must reset
voltage (VDC)
Maximum
Power
consumption
(mW)
voltage (VDC)
at 70°C max.
3
66.7
44.4
40.0
22.2
16.7
8.3
45
2.25
2.25
150% of rated
voltage
Approx. 200
4.5
5
101.3
125
3.375
3.75
6.75
9
3.375
03.75
6.75
9
9
405
12
24
720.4
2880.1
18
18
Dual Coil Latching Models G6ZK-1P(E), G6ZK-1F(E)
Rated
voltage
(VDC)
Rated
current
(mA)
Coil
resistance
(Ω, ±10%)
Must set
voltage (VDC)
Must reset
voltage (VDC)
Maximum
voltage (VDC)
at 70°C max.
Power
consumption
(mW)
3
120
80
72
40
30
15
25
2.25
2.25
150% of rated
voltage
Approx. 360
4.5
5
56.2
3.375
3.75
6.75
9
3.375
03.75
6.75
9
69.4
9
224.9
400
12
24
1599.9
18
18
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%.
2. The operating characteristics are measured at a coil temperature of 23°C.
3. The maximum voltage is the highest voltage that can be imposed on the relay coil instantaneously.
High-frequency Relay G6Z
201
■ Characteristics
Item
Non-latching
models
Single coil latching
models
Dual coil latching
models
G6Z-1P(E), G6Z-1F(E)
G6ZU-1P(E), G6ZU-1F(E)
G6ZK-1P(E), G6ZK-1F(E)
Contact resistance (See note 2)
Operating (set) time (See note 3)
Release (reset) time (See note 3)
Set/reset time
100 mΩ max.
10 ms max. (approx. 3.5 ms) 10 ms max. (approx. 2.5 ms)
10 ms max. (approx 2.5 ms)
---
12 ms
Insulation resistance (See note 4)
100 MΩ min. (at 500 VDC)
Dielectric strength
Coil and contacts
1,000 VAC, 50/60 Hz for 1 min.
500 VAC, 50/60 Hz for 1 min.
Coil and ground,
contacts and ground
Contacts of same polar- 500 VAC, 50/60 Hz for 1 min.
ity
Vibration resistance
Shock resistance
Mechanical durability
10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude)
Malfunction durability 10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude)
1,000 m/s2
500 m/s2
Mechanical durability
Malfunction durability
Mechanical
Service life
1,000,000 operations min. (at 36,000 operations/hour)
Electrical
300,000 operations min. (30 VAC, 10 mA/30 VDC, 10 mA), 100,000 operations min.
(900 MHz, 10 W) at a switching frequency of 1,800 operations/hour
Ambient temperature
Ambient humidity
Weight
Operating: -40°C to 70°C (-40°F to 158°F) (with no icing or condensation)
Operating: 5% to 85% RH
Approx. 2.8 g
Note: 1. The above values are initial values.
2. The contact resistance was measured with 10 mA at 1 VDC with a voltage drop method.
3. Values in parentheses are actual values.
4. The insulation resistance was measured with a 500-VDC megohmmeter applied to the same parts as those used for checking the
dielectric strength.
Engineering Data
Ambient Temperature vs.
Maximum Voltage
Ambient Temperature vs. Must
Operate or Must Release Voltage
Shock Malfunction
Y
100
250
200
150
100
50
1,000
Max. estimated value
Energized
Sample: G6Z-1P 5 VDC
90 Number of relays: 5
800
600
400
200
max.
Not
energized
80
70
60
50
40
30
20
10
0
X
1,000
Z
1,000
G6Z
G6ZU
avg.
min.
200
400
600
800
G6ZK
max.
1,000
Z'
1,000
X'
avg.
min.
Shock direction
X
X'
Unit:
m/s2
Y
1,000
Z
Sample: G6Z-1P-A 50 Ω
Must operate voltage
Must release voltage
Y'
5 VDC
Z'
Number of relays: 5
0
Y'
−60 −40 −20
0
20
40
60
80 100
−40
−20
0
20
40
60
80 100
Ambient temperature (°C)
Ambient temperature (°C)
Conditions: Shock is applied in X, Y, and
Z
directions three times each with and
without energizing the Relays to check
for contact malfunctions.
202
High-frequency Relay G6Z
Electrical Endurance (with Must
Operate and Must Release Voltage)
Electrical Endurance (with Must
Operate and Must Release Voltage)
100
100
Sample: G6Z-1PE 75 Ω 5 VDC
Sample: G6Z-1PE 75 Ω 5 VDC
Number of Relays: 5
Number of Relays: 5
Test conditions: 10 mA resistive load at 30 VAC
Switching frequency: 1,800 operations/h
Test conditions: 10 mA resistive load at 30 VDC
Switching frequency: 1,800 operations/h
80
80
Must operate
Must operate
60
max.
min.
max.
min.
60
40
40
Must release
Must release
max.
min.
max.
min.
20
0
20
0
0.0001 0.001
0.01
0.1
1
10
100
0.0001 0.001
0.01
0.1
1
10
100
Operating frequency (×103 operations)
Operating frequency (×103 operations)
Electrical Endurance
(Contact Resistance)
1,000
Electrical Endurance
(Contact Resistance)
1,000
NO
NO
Sample: G6Z-1PE 75 Ω 5 VDC
Sample: G6Z-1PE 75 Ω 5 VDC
contact
NC
700
700
contact
NC
Number of Relays: 5
Number of Relays: 5
Test conditions: 10 mA resistive load
at 30 VAC
Test conditions: 10 mA resistive load
at 30 VDC
500
500
contact
contact
Switching frequency: 1,800 operations/h
Switching frequency: 1,800 operations/h
300
300
max.
100
100
max.
Contact resistance
70
50
70
50
Contact resistance
max.
min.
min.
max.
min.
min.
30
30
10
10
0.001 0.01
0.1
1
10
100 1,000
0.001 0.01
0.1
1
10
100 1,000
Operating frequency (×103 operations)
Operating frequency (×103 operations)
External Magnetic Interference
(Average value)
(Average value)
(Average value)
+30
+30
+20
+30
S
N
S
N
S
N
+20
+10
0
+20
+10
0
+10
0
−10
−10
−10
−20
−30
−20
−30
−20
−30
Sample: G6Z-1P 5 VDC
Number of Relays: 5
Must operate voltage
Must release voltage
Sample: G6Z-1P 5 VDC
Number of Relays: 5
Must operate voltage
Must release voltage
Sample: G6Z-1P 5 VDC
Number of Relays: 5
Must operate voltage
Must release voltage
−1,200 −800
−400
0
400
800 1,200
−1,200 −800
−400
0
400
800 1,200
−1,200 −800
−400
0
400
800 1,200
External magnetic field (A/m)
External magnetic field (A/m)
External magnetic field (A/m)
High-frequency Relay G6Z
203
High-frequency Characteristics at 75 Ω High-frequency Characteristics at 75 Ω High-frequency Characteristics at 75 Ω
(Isolation)
(Insertion Loss)
(Return Loss, V.SWR)
(Average value (initial value))
(Average value (initial value))
(Average value (initial value))
V
.
S
W
R
0
0
0
1.7
1.6
Sample: G6Z-1PE 75 Ω 5 VDC
Sample: G6Z-1PE 75 Ω 5 VDC
with terminating resistance
with terminating resistance
10
20
40
60
0.2
0.4
0.6
0.8
Return loss
20
30
40
50
1.5
1.4
1.3
1.2
V.SWR
80
Sample: G6Z-1PE 75 Ω 5 VDC
with terminating resistance
60
70
1.1
1
N.O.
N.C.
N.O.
N.C.
N.O.
N.C.
* Substrate loss removed
100
1.0
0
500
1,000 1,500 2,000 2,500 3,000
Frequency (MHz)
0
500
1,000 1,500 2,000 2,500 3,000
0
500
1,000 1,500 2,000 2,500 3,000
Frequency (MHz)
Frequency (MHz)
High-frequency Characteristics at 50 Ω High-frequency Characteristics at 50 Ω High-frequency Characteristics at 50 Ω
(Isolation)
(Insertion Loss)
(Return Loss, V.SWR)
(Average value (initial value))
(Average value (initial value))
(Average value (initial value))
V
.
S
W
R
0
0
1.7
1.6
0
Sample: G6Z-1PE-A 50 Ω 5 VDC
with terminating resistance
Sample: G6Z-1PE-A 50 Ω 5 VDC
with terminating resistance
10
20
40
60
0.2
0.4
0.6
0.8
20
30
40
50
1.5
1.4
1.3
1.2
Return loss
V.SWR
80
Sample: G6Z-1PE-A 50 Ω 5 VDC
with terminating resistance
* Substrate loss removed
60
70
1.1
1
N.O.
N.C.
N.O.
N.C.
N.O.
N.C.
100
1.0
0
500
1,000 1,500 2,000 2,500 3,000
Frequency (MHz)
0
500
1,000 1,500 2,000 2,500 3,000
0
500
1,000 1,500 2,000 2,500 3,000
Frequency (MHz)
Frequency (MHz)
Must Operate and Must Release
Time Distribution (See note.)
Must Operate and Must Release
Bounce Time Distribution (See note.)
25
30
Must operate
Must release time
Sample: G6Z-1P
75 Ω 5 VDC
Number of Relays: 32
Must operate bounce time
Must release bounce time
25
20
15
10
5
Sample: G6Z-1P
75 Ω 5 VDC
Number of Relays: 32
20
15
10
5
0
1.0
2.0
3.0
4.0
5.0
0
0.5
1.0
1.5
2.0
Time (ms)
Time (ms)
Note: The tests were conducted at an ambient temperature of 23°C.
204
High-frequency Relay G6Z
Dimensions
Unit: mm
■ PCB Through-hole Terminal Types
Mounting Dimensions (Bottom View)
Terminal Arrangement/Internal
Connections (Bottom View)
G6Z-1PE
G6Z-1PE-R
G6ZU-1PE
Tolerance: 0.1 mm
G6Z-1PE
Six, 1.8-dia.
Orientation mark
1
7
Six, 1.0-dia. holes
Three, 1.6-dia.
−
+
7.62
14
13 1211
10
9
8
7
20
8.6
Three, 0.8-dia. holes
2.54
7.62
15.24
G6Z-1PE-R
Orientation mark
1
8.9
3
−
+
6-0.6
3-0.4
0.2
(Coil
terminal)
0.18
14
13 1211
10
9
8
7
8
2.54
7.62
7.62
15.24
G6ZU-1PE
Orientation mark
1
Note: Each value has a tolerance of 0.3 mm.
S
R
−
+
+
−
14
13 1211
10
9
Mounting Dimensions (Bottom View)
Terminal Arrangement/Internal
Connections (Bottom View)
G6Z-1PE-A
G6ZU-1PE-A
Tolerance: 0.1 mm
G6Z-1PE-A
Nine, 1.8-dia.
Orientation mark
1
7
Nine, 1.0-dia. holes
−
+
7.62
14
13 1211
10 9
8
20
8.6
2.54
7.62
15.24
G6ZU-1PE-A
8.9
Orientation mark
1
7
8
3
S
R
−
+
−
+
2.54
9-0.6
0.2
(Coil
terminal)
0.18
7.62
7.62
14
13 1211
10 9
15.24
Note: Each value has a tolerance of 0.3 mm.
High-frequency Relay G6Z
205
Mounting Dimensions (Bottom View)
Terminal Arrangement/Internal
Connections (Bottom View)
G6Z-1P
G6ZU-1P
Tolerance: 0.1 mm
G6Z-1P
Eight, 1.8-dia.
Orientation mark
1
3
4
5
7
Eight, 1.0-dia. holes
−
+
7.62
Three, 1.6-dia.
14
13 12
10 9
8
Three, 0.8-dia. holes
2.54
20
8.6
7.62
15.24
G6ZU-1P
8.9
3
Orientation mark
1
3
4
5
7
8
S
R
−
+
+
−
8-0.6
3-0.4
0.2
(Coil
terminal)
0.18
2.54
7.62
7.62
14
13 12
10 9
15.24
Note: Each value has a tolerance of 0.3 mm.
Mounting Dimensions (Bottom View)
Terminal Arrangement/Internal
Connections (Bottom View)
G6Z-1P-A
G6ZU-1P-A
Tolerance: 0.1 mm
G6Z-1P-A
Eleven, 1.8-dia.
Orientation mark
1
3
4
5
7
8
Eleven, 1.0-dia. holes
−
+
7.62
14
13 12
10 9
20
8.6
2.54
7.62
15.24
G6ZU-1P-A
8.9
Orientation mark
1
3
4
5
7
8
3
S
R
−
+
−
+
2.54
11-0.6
0.2
(Coil
terminal)
0.18
7.62
7.62
14
13 12
10 9
15.24
Note: Each value has a tolerance of 0.3 mm.
Mounting Dimensions (Bottom View)
Tolerance: 0.1 mm
Terminal Arrangement/Internal
Connections (Bottom View)
G6ZK-1PE
Seven, 1.8-dia.
Orientation mark
1
6
7
−
+
Seven, 1.0-dia. holes
Three, 1.6-dia.
R
−
+
S
7.62
14
13 1211
10 9
8
Three, 0.8-dia. holes
20
8.6
2.54
7.62
15.24
8.9
3
7-0.6
0.2
(Coil
terminal)
0.18
2.54
7.62
3-0.4
7.62
15.24
Note: Each value has a tolerance of 0.3 mm.
206
High-frequency Relay G6Z
Mounting Dimensions (Bottom View)
Tolerance: 0.1 mm
Terminal Arrangement/Internal
Connections (Bottom View)
G6ZK-1PE-A
Ten, 1.8-dia.
Orientation mark
1
6
7
−
+
Ten, 1.0-dia. holes
R
−
+
7.62
S
14
13 1211
10 9
8
20
8.6
2.54
7.62
15.24
8.9
3
2.54
7.62
10-0.6
0.2
(Coil
terminal)
0.18
7.62
15.24
Note: Each value has a tolerance of 0.3 mm.
Mounting Dimensions (Bottom View)
Tolerance: 0.1 mm
Terminal Arrangement/Internal
Connections (Bottom View)
G6ZK-1P
Nine, 1.8-dia.
Orientation mark
1
3
4
5
6
7
−
+
R
Nine, 1.0-dia. holes
Three, 1.6-dia.
−
+
S
7.62
14
13 12
10 9
8
20
8.6
Three, 0.8-dia. holes
2.54
7.62
15.24
8.9
3
9-0.6
0.2
(Coil
terminal)
0.18
2.54
7.62
7.62
3-0.4
15.24
Note: Each value has a tolerance of 0.3 mm.
Mounting Dimensions (Bottom View)
Terminal Arrangement/Internal
Connections (Bottom View)
Orientation mark
G6ZK-1P-A
Tolerance: 0.1 mm
Twelve, 1.8-dia.
1
3
4
5
6
7
−
+
R
Twelve, 1.0-dia. holes.
−
+
7.62
S
14
13 12
10 9
8
20
8.6
2.54
7.62
15.24
8.9
3
2.54
7.62
12-0.6
15.24
0.2
(Coil
terminal)
0.18
7.62
Note: Each value has a tolerance of 0.3 mm.
High-frequency Relay G6Z
207
■ Surface Mount Terminal Types
Mounting Dimensions (Top View)
Tolerance: 0.1 mm
Terminal Arrangement/Internal
Connections (Top View)
G6Z-1FE
G6ZU-1FE
G6Z-1FE
Orientation mark
15.24
14
13 1211
10
9
8
7.62
2.54
2.3
0.8
0.8
0.8
−
+
1
7
20
8.6
9.6
8.3
G6ZU-1FE
0.2
(Coil
terminal)
9.3
Orientation mark
14
Six, 1.1
13 1211
10
9
8
7
0.18
6-0.6
3-0.4
S
R
−
+
+
−
2.54
7.62
Note 1: Each value has a tolerance of 0.3 mm.
1
15.24
2: The coplanarity of the terminals is 0.1 mm max.
Mounting Dimensions (Top View)
Tolerance: 0.1 mm
Terminal Arrangement/Internal
Connections (Top View)
G6Z-1FE-A
G6ZU-1FE-A
G6Z-1FE-A
Orientation mark
15.24
7.62
14
13 1211
10
9
8
2.3
2.54
−
+
1
7
8.3
20
8.6
9.6
G6ZU-1FE-A
Nine, 1.1
0.2
(Coil
terminal)
9.3
Orientation mark
14
13 1211
10
9
8
7
0.18
2.54
7.62
9-0.6
S
R
−
+
+
−
15.24
Note 1: Each value has a tolerance of 0.3 mm.
1
2: The coplanarity of the terminals is 0.1 mm max.
Mounting Dimensions (Top View)
Tolerance: 0.1 mm
Terminal Arrangement/Internal
Connections (Top View)
G6Z-1F
G6ZU-1F
G6Z-1F
Orientation mark
15.24
14
13 12
10
9
8
2.54
2.3
0.8
0.8
−
+
1
3
4
5
7
8.3
20
8.6
9.6
G6ZU-1F
13 12
Eight, 1.1
0.8
0.2
(Coil
terminal)
9.3
Orientation mark
14
7.62
10
5
9
8
7
0.18
8-0.6
3-0.4
S
R
−
+
+
−
2.54
7.62
Note 1: Each value has a tolerance of 0.3 mm.
2: The coplanarity of the terminals is 0.1 mm max.
1
3 4
15.24
208
High-frequency Relay G6Z
Mounting Dimensions (Top View)
Tolerance: 0.1 mm
Terminal Arrangement/Internal
Connections (Top View)
G6Z-1F-A
G6ZU-1F-A
G6Z-1F-A
Orientation mark
15.24
14
13 12
10
9
8
2.3
2.54
−
+
8.3
1
3
4
5
7
20
8.6
9.6
Eleven, 1.1
G6ZU-1F-A
7.62
0.2
(Coil
terminal)
9.3
Orientation mark
14
13 12
10
9
8
7
0.18
2.54
11-0.6
S
R
−
+
+
−
7.62
15.24
Note 1: Each value has a tolerance of 0.3 mm.
1
3
4
5
2: The coplanarity of the terminals is 0.1 mm max.
Mounting Dimensions (Top View)
Tolerance: 0.1 mm
Terminal Arrangement/Internal
Connections (Top View)
G6ZK-1FE
Orientation mark
15.24
14
13 1211
10
9
8
7.62
2.54
−
+
S
2.3
0.8
0.8
0.8
−
+
R
1
6
7
20
8.6
9.6
8.3
0.2
(Coil
terminal)
9.3
0.18
Seven, 1.1
7-0.6
3-0.4
2.54
7.62
Note 1: Each value has a tolerance of 0.3 mm.
15.24
2: The coplanarity of the terminals is 0.1 mm max.
Mounting Dimensions (Top View)
Tolerance: 0.1 mm
Terminal Arrangement/Internal
Connections (Top View)
G6ZK-1FE-A
Orientation mark
15.24
7.62
14
13 1211
10
9
8
2.3
2.54
−
+
S
−
+
R
20
8.6
9.6
1
6
7
8.3
0.2
(Coil
terminal)
9.3
Ten, 1.1
0.18
2.54
7.62
Ten, 0.6
15.24
Note 1: Each value has a tolerance of 0.3 mm.
2: The coplanarity of the terminals is 0.1 mm max.
High-frequency Relay G6Z
209
Mounting Dimensions (Top View)
Tolerance: 0.1 mm
Terminal Arrangement/Internal
Connections (Top View)
G6ZK-1F
Orientation mark
15.24
14
13 12
10
9
8
7.62
2.54
−
+
S
2.3
0.8
0.8
−
+
R
1
3
4
5
6
7
20
8.6
9.6
8.3
0.2
(Coil
terminal)
9.3
0.18
Nine, 1.1
0.8
Nine, 0.6
Three, 0.4
2.54
7.62
Note 1: Each value has a tolerance of 0.3 mm.
15.24
2: The coplanarity of the terminals is 0.1 mm max.
Mounting Dimensions (Top View)
Tolerance: 0.1 mm
Terminal Arrangement/Internal
Connections (Top View)
G6ZK-1F-A
Orientation mark
15.24
7.62
14
13 12
10
9
8
2.3
2.54
−
+
S
−
+
R
20
8.6
9.6
1
3
4
5
6
7
8.3
0.2
(Coil
terminal)
9.3
Twelve, 1.1
0.18
2.54
Twelve, 0.6
7.62
15.24
Note 1: Each value has a tolerance of 0.3 mm.
2: The coplanarity of the terminals is 0.1 mm max.
210
High-frequency Relay G6Z
Tube Packaging and Tape and Reel Packaging
Carrier Tape Dimensions
■ Tube Packaging
Relays in tube packaging are arranged so that the orientation mark
of each Relay in on the left side.
0.1
10
0.1
16
4
0.1
1.5+00.1 dia.
0.1
1.75
0.1
0.05
2
0.5
Be sure not to make mistakes in Relay orientation when mounting
the Relay to the PCB.
0.1
14.2
0.1
0.1
22.6
28.4
Operation of Relays
0.1
20.6
0.3
Stopper (gray)
Stopper (green)
32
5° max.
0.1
10.2
1.5+0
0.1
A
1.7+0
0.15
0.1
4
0.2
5° max.
Tube length: 530 mm (stopper not included)
No. of Relays per tube: 25
R0.75
Enlarged view of A
■ Tape and Reel Packaging
(Surface mount Terminal
Models)
Note: The radius of the unmarked corner is 0.3 mm.
When ordering Relays in tape packing, add the prefix “-TR” to the
model number, otherwise the Relays in stick packing will be pro-
vided.
Relays per Reel: 300
Direction of Relay Insertion
Pulling direction
Orientation mark
Top tape
(cover tape)
Pulling
direction
Carrier tape
Emboss
tape
Reel Dimensions
1
33.5
1
37.5
13 0.2 dia.
0.8
21
dia.
0.5
2
A
330 80
R1
Enlarged view of A
High-frequency Relay G6Z
211
Recommended Soldering Method
■ Temperature Conditions for IRS
Method
When using reflow soldering, ensure that the Relay terminals and the
top of the case stay below the following curve. Check that these con-
ditions are actually satisfied before soldering the terminals.
T4
T3
T2
T1
t2
t1
Time
Preheating
Soldering
Measured
part
Preheating
(T1 → T2, t1)
Soldering
(T3, t2)
Maximum
peak
(T4)
Terminals
150 → 180°C, 230°C min,
250°C max.
120 s max.
30 s max.
Top of case
---
---
255°C max.
Do not quench the terminals after mounting. Clean the Relay using
alcohol or water no hotter than 40°C max.
The thickness of cream solder to be applied should be between 150
and 200 µm on OMRON’s recommended PCB pattern.
Correct Soldering
Incorrect Soldering
Relay
Insufficient
amount of
solder
Excessive
amount of
solder
Terminal
Solder
Land
PCB
Check the soldering in the actual mounting conditions before use.
212
High-frequency Relay G6Z
Safety Precautions
Substrate for High-frequency Characteristic
Compensation (75-Ω Models, E-shape or Y-shape)
■ Precautions for Correct Use
Please observe the following precautions to prevent failure to oper-
ate, malfunction, or undesirable effect on product performance.
30.7
(Unit: mm)
20
4-dia. through-hole
High-frequency Characteristics
Measurement Method and
Measurement Substrate
0.6-dia. through-hole
1
0.95
High-frequency characteristics for the G6Z are measured in the way
shown below. Consult your OMRON representative for details on 50-
Ω models.
40 30
Measurement Method for 75-Ω Models
G6Z
Network vector analyzer
(Agilent Technologies)
75-Ω terminating
resistance
Substrate Types
Material: FR-4 glass epoxy (glass cloth impregnated with epoxy
resin and copper laminated to its outer surface)
HP8753D
50Ω/75Ω adapter
(Agilent Technologies)
11852B-004
Thickness: 1.6 mm
Thickness of copper plating:18 µm
Note: 1. The compensation substrate is used when measuring the
Relay’s insertion loss. The insertion loss is obtained by
subtracting the measured value for the compensation sub-
strate from the measured value with the Relay mounted to
the high-frequency measurement substrate.
Through-hole Substrate (75-Ω Models, E-shape or
Y-shape)
40
30
4-dia. through-hole
2. For convenience, the diagrams of the high-frequency
measurement substrates given here apply both to models
with an E-shape terminal structure and to models with a Y-
shape terminal structure.
0.4
(Unit: mm)
1.4
3. Be sure to mount a standoff tightly to the through-hole sub-
strate.
3.59
4. Use measuring devices, connectors, and substrates that
are appropriate for 50 Ω and 75 Ω respectively.
40 30
1
5. Ensure that there is no pattern under the Relay. Other-
wise, the impedance may be adversely affected and the
Relay may not be able to attain its full characteristics.
0.95
6.3
Handling
0.6-dia. through-hole
Do not use the Relay if it has been dropped. Dropping the Relay may
adversely affect its functionality.
SMD-type Substrate (75-Ω Models, E-shape or Y-shape)
Protect the Relay from direct sunlight and keep the Relay under nor-
mal temperature, humidity, and pressure.
40
Flow Soldering
30
4-dia. through-hole
1.4
(Unit: mm)
Solder: JIS Z3282, H63A
0.4
Soldering temperature: Approx. 250°C (260°C if the DWS method is
used)
0.6-dia. through-hole
Soldering time: Approx. 5 s max. (approx. 2 s for the first time and
approx. 3 s for the second time if the DWS method is used)
Be sure to make a molten solder level adjustment so that the solder
will not overflow on the PCB.
40 30
3.91
1
0.95
6.3
High-frequency Relay G6Z
213
Claw Securing Force During Automatic Mounting
Latching Relay Mounting
During automatic insertion of Relays, be sure to set the securing
force of each claw to the following so that the Relay’s characteristics
will be maintained.
Make sure that the vibration or shock that is generated from other
devices, such as Relays, on the same panel or substrate and
imposed on the Latching Relay does not exceed the rated value, oth-
erwise the set/reset status of the Latching Relay may be changed.
The Latching Relay is reset before shipping. If excessive vibration or
shock is imposed, however, the Latching Relay may be set acciden-
tally. Be sure to apply a reset signal before use.
B
Direction A: 4.90 N max.
Direction B: 4.90 N max.
Direction C: 4.90 N max.
Coating
Do not use silicone coating to coat the Relay when it is mounted to
the PCB. Do not wash the PCB after the Relay is mounted using
detergent containing silicone. Otherwise, the detergent may remain
on the surface of the Relay.
Secure the claws to the shaded area.
Do not attach them to the center area
or to only part of the Relay.
214
High-frequency Relay G6Z
Certain Terms and Conditions of Sale
1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed 12. Warranties. (a) Exclusive Warranty. Seller's exclusive warranty is that the
part of all catalogs, manuals or other documents, whether electronic or in writ-
ing, relating to the sale of goods or services (collectively, the "Goods") by
Omron Electronic Components LLC and its subsidiary companies ("Seller").
Seller hereby objects to any terms or conditions proposed in Buyer's purchase
order or other documents which are inconsistent with, or in addition to, these
Terms. Please contact your Omron representative to confirm any additional
terms for sales from your Omron company.
Goods will be free from defects in materials and workmanship for a period of
twelve months from the date of sale by Seller (or such other period expressed
in writing by Seller). Seller disclaims all other warranties, express or implied.
(b) Limitations. SELLER MAKES NO WARRANTY OR REPRESENTATION,
EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL-
ITY OR FITNESS FOR
A PARTICULAR PURPOSE OF THE GOODS.
BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
GOODS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR
INTENDED USE. Seller further disclaims all warranties and responsibility of
any type for claims or expenses based on infringement by the Goods or other-
wise of any intellectual property right. (c) Buyer Remedy. Seller's sole obliga-
tion hereunder shall be to replace (in the form originally shipped with Buyer
responsible for labor charges for removal or replacement thereof) the non-
complying Good or, at Seller's election, to repay or credit Buyer an amount
equal to the purchase price of the Good; provided that in no event shall Seller
be responsible for warranty, repair, indemnity or any other claims or expenses
regarding the Goods unless Seller's analysis confirms that the Goods were
properly handled, stored, installed and maintained and not subject to contami-
nation, abuse, misuse or inappropriate modification. Return of any goods by
Buyer must be approved in writing by Seller before shipment. Seller shall not
be liable for the suitability or unsuitability or the results from the use of Goods
in combination with any electrical or electronic components, circuits, system
assemblies or any other materials or substances or environments. Any
advice, recommendations or information given orally or in writing, are not to be
construed as an amendment or addition to the above warranty.
2. Prices. All prices stated are current, subject to change without notice by
Seller. Buyer agrees to pay the price in effect at time of shipment.
3. Discounts. Cash discounts, if any, will apply only on the net amount of
invoices sent to Buyer after deducting transportation charges, taxes and
duties, and will be allowed only if (i) the invoice is paid according to Seller's
payment terms and (ii) Buyer has no past due amounts owing to Seller.
4. Orders. Seller will accept no order less than $200 net billing.
5. Governmental Approvals. Buyer shall be responsible for, and shall bear all
costs involved in, obtaining any government approvals required for the impor-
tation or sale of the Goods.
6. Taxes. All taxes, duties and other governmental charges (other than general
real property and income taxes), including any interest or penalties thereon,
imposed directly or indirectly on Seller or required to be collected directly or
indirectly by Seller for the manufacture, production, sale, delivery, importation,
consumption or use of the Goods sold hereunder (including customs duties
and sales, excise, use, turnover and license taxes) shall be charged to and
remitted by Buyer to Seller.
7. Financial. If the financial position of Buyer at any time becomes unsatisfactory
to Seller, Seller reserves the right to stop shipments or require satisfactory 13. Damage Limits; Etc. SELLER SHALL NOT BE LIABLE FOR SPECIAL, INDI-
security or payment in advance. If Buyer fails to make payment or otherwise
comply with these Terms or any related agreement, Seller may (without liability
and in addition to other remedies) cancel any unshipped portion of Goods sold
hereunder and stop any Goods in transit until Buyer pays all amounts, includ-
ing amounts payable hereunder, whether or not then due, which are owing to it
by Buyer. Buyer shall in any event remain liable for all unpaid accounts.
8. Cancellation; Etc. Orders are not subject to rescheduling or cancellation
unless Buyer indemnifies Seller fully against all costs or expenses arising in
connection therewith.
RECT OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUC-
TION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE
GOODS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY,
NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of
Seller exceed the individual price of the Good on which liability is asserted.
14. Indemnities. Buyer shall indemnify and hold harmless Seller, its affiliates and
its employees from and against all liabilities, losses, claims, costs and
expenses (including attorney's fees and expenses) related to any claim, inves-
tigation, litigation or proceeding (whether or not Seller is a party) which arises
or is alleged to arise from Buyer's acts or omissions under these Terms or in
any way with respect to the Goods. Without limiting the foregoing, Buyer (at
its own expense) shall indemnify and hold harmless Seller and defend or settle
any action brought against Seller to the extent that it is based on a claim that
any Good made to Buyer specifications infringed intellectual property rights of
another party.
15. Property; Confidentiality. The intellectual property embodied in the Goods is
the exclusive property of Seller and its affiliates and Buyer shall not attempt to
duplicate it in any way without the written permission of Seller. Notwithstand-
ing any charges to Buyer for engineering or tooling, all engineering and tooling
shall remain the exclusive property of Seller. All information and materials
supplied by Seller to Buyer relating to the Goods are confidential and propri-
etary, and Buyer shall limit distribution thereof to its trusted employees and
strictly prevent disclosure to any third party.
16. Miscellaneous. (a) Waiver. No failure or delay by Seller in exercising any right
and no course of dealing between Buyer and Seller shall operate as a waiver
of rights by Seller. (b) Assignment. Buyer may not assign its rights hereunder
without Seller's written consent. (c) Amendment. These Terms constitute the
entire agreement between Buyer and Seller relating to the Goods, and no pro-
vision may be changed or waived unless in writing signed by the parties.
(d) Severability. If any provision hereof is rendered ineffective or invalid, such
provision shall not invalidate any other provision. (e) Setoff. Buyer shall have
no right to set off any amounts against the amount owing in respect of this
invoice. (f) As used herein, "including" means "including without limitation".
9. Force Majeure. Seller shall not be liable for any delay or failure in delivery
resulting from causes beyond its control, including earthquakes, fires, floods,
strikes or other labor disputes, shortage of labor or materials, accidents to
machinery, acts of sabotage, riots, delay in or lack of transportation or the
requirements of any government authority.
10. Shipping; Delivery. Unless otherwise expressly agreed in writing by Seller:
a. Shipments shall be by a carrier selected by Seller;
b. Such carrier shall act as the agent of Buyer and delivery to such carrier
shall constitute delivery to Buyer;
c. All sales and shipments of Goods shall be FOB shipping point (unless oth-
erwise stated in writing by Seller), at which point title to and all risk of loss of
the Goods shall pass from Seller to Buyer, provided that Seller shall retain a
security interest in the Goods until the full purchase price is paid by Buyer;
d. Delivery and shipping dates are estimates only.
e. Seller will package Goods as it deems proper for protection against normal
handling and extra charges apply to special conditions.
11. Claims. Any claim by Buyer against Seller for shortage or damage to the
Goods occurring before delivery to the carrier must be presented in writing to
Seller within 30 days of receipt of shipment and include the original transporta-
tion bill signed by the carrier noting that the carrier received the Goods from
Seller in the condition claimed.
Certain Precautions on Specifications and Use
1. Suitability of Use. Seller shall not be responsible for conformity with any stan- 2. Programmable Products. Seller shall not be responsible for the user's pro
dards, codes or regulations which apply to the combination of the Good in the
gramming of a programmable Good, or any consequence thereof.
Buyer's application or use of the Good. At Buyer's request, Seller will provide 3. Performance Data. Performance data given in this catalog is provided as a
applicable third party certification documents identifying ratings and limitations
of use which apply to the Good. This information by itself is not sufficient for a
complete determination of the suitability of the Good in combination with the
end product, machine, system, or other application or use. The following are
guide for the user in determining suitability and does not constitute a warranty
It may represent the result of Seller's test conditions, and the user must corre
late it to actual application requirements. Actual performance is subject to the
Seller's Warranty and Limitations of Liability.
some examples of applications for which particular attention must be given. 4. Change in Specifications. Product specifications and accessories may be
This is not intended to be an exhaustive list of all possible uses of this Good,
nor is it intended to imply that the uses listed may be suitable for this Good:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety
equipment, and installations subject to separate industry or government
regulations.
changed at any time based on improvements and other reasons. It is our prac
tice to change part numbers when published ratings or features are changed
or when significant construction changes are made. However, some specifica
tions of the Good may be changed without any notice. When in doubt, specia
part numbers may be assigned to fix or establish key specifications for you
application. Please consult with your Seller's representative at any time to con
firm actual specifications of purchased Good.
5. Errors and Omissions. The information in this catalog has been carefully
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors, or omissions.
(iii) Systems, machines and equipment that could present a risk to life or
property. Please know and observe all prohibitions of use applicable to
this Good.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT
THE SELLER'S PRODUCT IS PROPERLY RATED AND INSTALLED FOR
THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website
at www.omron.com/oei – under the “About Us” tab, in the Legal Matters section.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.omron.com/oei
Canada - http://www.omron.ca
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
OMRON CANADA, INC.
885 Milner Avenue
Toronto, Ontario M1B 5V8
416-286-6465
847-882-2288
Cat. No. GC RLY8A
8/04
Specifications subject to change without notice
Printed in USA
相关型号：
G6Z-1FE-DC4.5
RF Relay, SPDT, Momentary, 0.044A (Coil), 4.5VDC (Coil), 200mW (Coil), 0.5A (Contact), 30VDC (Contact), 2600MHz, 10W (RF Input), DC Input, AC/DC Output, Surface Mount-Straight
OMRON
G6Z-1FE-DC5
RF Relay, SPDT, Momentary, 0.04A (Coil), 5VDC (Coil), 200mW (Coil), 0.5A (Contact), 30VDC (Contact), 2600MHz, 10W (RF Input), DC Input, AC/DC Output, Surface Mount-Straight
OMRON
G6Z-1FE-DC9
RF Relay, SPDT, Momentary, 0.022A (Coil), 9VDC (Coil), 200mW (Coil), 0.5A (Contact), 30VDC (Contact), 2600MHz, 10W (RF Input), DC Input, AC/DC Output, Surface Mount-Straight
OMRON
G6Z-1FE-TR4.5VDC
RF Relay, SPDT, Momentary, 0.044A (Coil), 4.5VDC (Coil), 200mW (Coil), 0.01A (Contact), 30VDC (Contact), 2600MHz, DC Input, AC/DC Output, Surface Mount-Straight
OMRON
G6Z-1FE-TR5VDC
RF Relay, SPDT, Momentary, 0.04A (Coil), 5VDC (Coil), 200mW (Coil), 0.01A (Contact), 30VDC (Contact), 2600MHz, DC Input, AC/DC Output, Surface Mount-Straight
OMRON
©2020 ICPDF网 联系我们和版权申明