G7J-2A2B-B-Z [OMRON]
Power/Signal Relay;型号: | G7J-2A2B-B-Z |
厂家: | OMRON ELECTRONICS LLC |
描述: | Power/Signal Relay 继电器 |
文件: | 总8页 (文件大小:1566K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
General Purpose Relay
G7J
• Ideal for 3-phase motor control applications and resistive
and inductive loads.
• No contact chattering for momentary voltage drops up to
50% of rated voltage.
• Withstands more than 4 kV between contacts that are of
different polarity and between the coil and contacts.
• Flame-resistant materials (UL94V-0) used for all insulation.
• Push-to-test button on all models lets user check contact
operation.
• Class B coil insulation available.
Ordering Information
Type
Contact form
Model
Quick-connect terminal
Screw terminal
PCB terminal
G7J-4A-P, G7J-4A-PZ
G7J-3A1B-P, G7J-3A1B-PZ
G7J-2A2B-P
PCB mounting
4PST-NO
—
—
—
—
—
—
3PST-NO/SPST-NC
DPST-NO/DPST-NC
4PST-NO
W-bracket
(see note)
G7J-4A-T, G7J-4A-TZ
G7J-3A1B-T, G7J-3A1B-TZ G7J-3A1B-B, G7J-3A1B-BZ
G7J-2A2B-B
G7J-4A-B
3PST-NO/SPST-NC
DPST-NO/DPST-NC G7J-2A2B-T
Note: The G7J relays require a W-bracket for mounting. Order the bracket separately below. To order a relay and bracket packed together,
add “-W1” to the part number before the coil voltage suffix. For example, G7J-2A2B-B-W1-AC100/120.
Model Number Legend
To Order: Select the part number and add the desired coil voltage rating (e.g., G7J-3A1B-B-AC100/120).
1. Contact Form
4A: 4PST-NO
3A1B: 3PST-NO/SPST-NC
2A2B: DPST-NO/DPST-NC
2. Terminal Shape
P: PCB terminals
B: Screw terminals
T: Quick-connect terminals
(#250 terminal)
3. Contact Structure
Z: Bifurcated contact
None: Single contact
G7J -
-
-
1
2
3
Note: For bifurcated contact type,
output is 1NO (4PST-NO) or
1NC (3PST-NO/SPST-NC).
■ Accessories
Types
Applicable relays
Model
W-brackets
G7J-4A-B, G7J-3A1B-B(Z), G7J-2A2B-B, G7J-4A-T(Z), G7J-3A1B-T, G7J-2A2B-T
R99-04-FOR-G5F
■ Typical Applications
Compressors for air conditioners and heater switching controllers.
Switching controllers for power tools or motors.
Lamp controls, motor drivers, and power supply switching controllers in copy machines,
facsimile machines, and other office equipment.
Power controllers for packers or food processing equipment.
Power controllers for inverters.
General Purpose Relay G7J
299
Specifications
■ Contact Data
Load
Resistive load (p.f. = 1)
NO
NC
Rated load
25 A @ 220 VAC (1 A @ 220 VAC) / 25 A @ 30 VDC 8 A @ 220 VAC (1 A @ 220 VAC)/ 8 A @ 30 VDC
Rated carry current
25 A (1 A)
8 A (1 A)
Max. switching voltage
Max. switching current
Max. switching capacity
Min. permissible load
250 VAC,125 VDC
25 A (1 A)
8 A (1A)
5,500 VA, 750 W DC
1,760 VA, 240 W DC
100 mA @ 24 VDC (10 mA @ 24 VDC) at 60 operations/minute, 23°C ambient temperature (See note 2)
Note: 1. The values in parentheses indicate values for a bifurcated contact.
2. P level: λ60 =0.1 x 10-6/operations
■ Coil Data
Rated voltage
Rated
Coil
Must operate
Must release
% of rated voltage
15% min.
Max. voltage
Power
(VAC)
current (mA)
resistance (Ω)
consumption
AC
24
75
—
75% max.
110% @ 23°C
Approx.1.8
to 2.6 VA
50
36
—
—
—
100/120
200/240
12
18 to 21.60
9 to 10.80
DC
167
83
72
10% min.
Approx. 2.0 W
24
288
48
42
1150
5000
100
20
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with tolerances of +15%/-20% for AC rated current and
±15% for DC coil resistance. The values given for AC rated current apply at 50 Hz or 60 Hz.
2. Performance characteristic data are measured at a coil temperature of 23°C.
■ Characteristics
Contact resistance (See note 2)
Operating time (See note 3)
Release time (See note 3)
Operating frequency Mechanical
Electrical
50 mΩ max.
50 ms max.
50 ms max.
1,800 operations/hour max.
1,800 operations/hour max.
Insulation resistance (See note 4)
Dielectric strength
1,000 MΩ minimum at 500 VDC
4,000 VAC, 50/60 Hz for 1 minute between coil and contacts
4,000 VAC, 50/60 Hz for 1 minute between contacts of different polarity
2,000 VAC, 50/60 Hz for 1 minute between contacts of the same polarity
10,000 V between coil and contact with 1.2 x 50 μs impulse wave
Impulse withstand voltage
Vibration
Mechanical durability 10 to 55 Hz, 1.50 mm double amplitude
Malfunction durability NO: 10 to 55 Hz, 1.50 mm double amplitude
NC: 10 to 26 Hz, 1.50 mm double amplitude
1000 m/s2 (Approx. 100 G)
Shock
Mechanical durability
Malfunction durability
NO: 100 m/s2 (Approx. 10 G)
NC: 20 m/s2 (Approx. 2 G)
Service life
Mechanical
Electrical
1 million operations minimum at 1,800 operations/hour
100,000 operations minimum at 1,800 operations/hour at rated load (@ 23°C
Ambient temperature Operating
-25° to 60°C with no icing or condensation
5% to 85% RH
Humidity
Weight
Operating
PCB terminal
Screw terminal
Approx. 140 g
Approx. 165 g
Note: 1. Data shown are of initial value.
2. Measured with 1A @ 5 VDC using the voltage drop method.
3. Measured with rated voltage imposed, ignoring any contact bounce, at ambient temperature = 23°C.
4. Measured with a 500-VDC megger applied to the same places as those used for checking the dielectric strength.
300
General Purpose Relay G7J
Engineering Data
Malfunctioning Shock
Maximum Switching Power
Endurance
5,000
AC resistive load
(cosφ = 1)
AC inductive load
(cosφ = 0.4)
(NO contact)
AC resistive load
(cosφ = 1)
AC inductive load
(cosφ = 0.4)
G7J-2A2B
Terminals upwards
3,000
(NC contact)
Button
A1 downwards
downwards
1,000
DC resistive
load (NO
contact)
700
500
220 VAC (NO contact)
300
A2
downwards
DC resistive load
(NC contact)
100
Button upwards
Energized
Not energized
220 VAC (NC contact)
70
50
300
Terminals
downwards
Unit: m/s2
Switching voltage (V)
Switching current (A)
Shock direction
Number of samples: 5
Measurement conditions: Increase and decrease the specified shock
gradually imposed in X, Y, and Z directions three times each with
the Relay energized and not energized to check the shock values
that cause the Relay to malfunction.
Criteria: There must not be any contact separation for 1 ms or greater
2
with a shock of 100 m/s imposed when the coil is energized or with
a shock of 20 m/s2 when the coil is not energized.
Ambient Temperature vs. Coil
Temperature Rise
Ambient Temperature vs. Must-operate
and Must-release Voltage
G7J 100 to 120 VAC
G7J-4A 100 to 120 VAC
Must-operate voltage
Number of Relays: 5
Number of Relays: 5
Must-release voltage
Ambient temperature (°C)
Ambient temperature (°C)
G7J 24 VDC
G7J-4A 24 VDC
Number of Relays: 5
Must-operate voltage
Must-release voltage
Number of Relays: 5
Ambient temperature (°C)
Ambient temperature (°C)
Motor Load Performance
Item
G7J-4A-P, G7J-3A1B-P, G7J-4A-B, G7J-3A1B-B, G7J-4A-T, G7J-3A1B-T
Load
3φ, 220 VAC, 2.7 kW (with a inrush current of 78 A and a breaking current of 13 A)
Endurance
Electrical: 100,000 operations min.
General Purpose Relay G7J
301
Dimensions
Note: All units are in millimeters unless otherwise indicated
Screw Terminals with W-bracket
G7J-4A-B, G7J-3A1B-B, G7J-3A1B-BZ, G7J-2A2B-B
Ten, M3.5
Mounting Holes
34.5 max.
Two, 4.5 dia. or M4
7.6
4.3
35 0.1
64 max.
55.2
43.2
51.5 max.
2
Quick-connect Terminals with W-bracket
G7J-4A-T, G7J-4A-TZ, G7J-3A1B-T, G7J-2A2B-T
34.5 max.
Mounting Holes
Two, 4.5 dia. or M4
64 max.
Note: W-bracket is sold
separately.
51.5 max.
PCB Terminals with PCB Mounting
G7J-4A-P, G7J-4A-PZ, G7J-3A1B-P, G7J-3A1B-PZ, G7J-2A2B-P
Mounting Dimensions
33.5
max.
20, 1.8+0.1 dia.
0
51 max.
51.5 max.
302
General Purpose Relay G7J
Terminal Arrangement/Internal Connections
G7J-4A-P
G7J-4A-B
G7J-4A-T
G7J-3A1B-P
G7J-3A1B-B
G7J-3A1B-T
G7J-2A2B-P
G7J-2A2B-B
G7J-2A2B-T
14
24
34
13
23
33
14
24
34
13
14
24
32
13
Note: Terminals 43 and 44 of the
G7J-4A-P(T) and contacts
41 and 42 of the
23
33
23
31
G7J-3A1B-P(B) are
bifurcated contacts.
42
A2
41
A1
42
A2
41
A1
44
A2
43
A1
The coil has no polarity.
Accessories (Order Separately)
R99-04 W-bracket (for G5F)
35
Two, 4.5 dia.
24
Mounting Holes
Two, 4.5 dia. or M4
28
30
9
29
35 0.1
7
44
4.4
■ Approvals
Note: 1. The rated values approved by each of the safety standards may be different from the performance characteristics individually defined in this catalog.
2. In the interest of product improvement, specifications are subject to change without notice.
UL Recognized (File No. E41643) / CSA Certified (File No. LR 35535) - - Ambient Temp = 40°C
Coil ratings
Contact ratings
Number of test
operations
24 to 265 VAC
6 to 110 VDC
NO contact
25 A 277 VAC, Resistive
25 A 120 VAC, General Use
25 A 277 VAC, General Use
25 A 240 VAC, General Use
1.5 kW 120 VAC, Tungsten
1.5 hp 120 VAC
30,000
100,000
6,000
3 hp 240/265/277 VAC
3-phase 3 hp 240/265/277 VAC
3-phase 5 hp 240/265/277 VAC
20FLA/120LRA 120 VAC
17FLA/102LRA 277 VAC
TV-10 120 VAC
30,000
25,000
30,000
6,000
25 A 30 VDC, Resistive
*1 A 277 VAC, General Use
8 A 277 VAC, Resistive
8 A 120 VAC, General Use
8 A 277 VAC, General Use
8 A 30 VDC, Resistive
NC contact
30,000
*1 A 277 VAC, General Use
6,000
Note: *These ratings are bifurcated contact ratings.
General Purpose Relay G7J
303
Reference
UL approval: UL508 for industrial control devices
UL1950 for information processing equipment including business machines
CSA approval: CSA C22.2 No. 14 for industrial control devices
CSA C22.2 No. 950 for information processing equipment including business machines
VDE - EN60255-1-00: 1997 and EN60255-23: 1996(File No. 5381UG)
Model
Coil ratings
Contact ratings
NO contact
NC contact
G7J-4A-B(P) (T)
G7J-2A2B(P) (T)
G7J-3A1B-B(P) (T)
6, 12, 24, 48, 100 VDC
24, 50, 100 to 120, 200 to 240 VAC
25 A 240 VAC cosφ = 0.4
25 A 240 VAC cosφ = 1
25 A 30 VDC L/R ≥ 1
8 A 240 VAC cosφ = 0.4
8 A 240 VAC cosφ = 1
8 A 30 VDC L/R ≥ 1
Note: Add the suffix “-KM” to the model number when ordering.
KEMA - EN60947-4-1 and IEC947-4-1 for contacts (File No. 2001291.02)
Model
Coil ratings
Contact ratings - NO contact
G7J-4A-B(P) (T) (Z)
G7J-2A2B(P) (T)
G7J-3A1B-B(P) (T) (Z)
200 to 240 VAC
Class AC1: 25 A at 220 VAC
11.5 A at 380 to 480 VAC
Class AC3: 11.5 A at 220 VAC and 8.5 A at 380
to 480 VAC
6, 12, 24, 48, 100 VDC
24, 50, 100 to 120, 200 to 240 VAC
*Class AC1: 1 A at 220 VAC
Note: Add the suffix “-KM” to the model number when ordering. *This rating is the bifurcated contact rating.
Precautions
Note: Be sure to read the precautions and information common to all relays, contained in the Technical User’s Guide,
“Electromechanical Relays - Technical Information”, for correct use.
Allow suitable slack on leads when wiring, and do not subject the ter-
minals to excessive force.
■ Correct Use
Installation
Tightening torque: 0.98 N·m
PCB Terminal-equipped Relays weigh approximately 140 g. Be sure that
the PCB is strong enough to support them. We recommend dual-side
through-hole PCBs to reduce solder cracking from heat stress.
Do not impose excessive external force on the G7J in the horizontal
or vertical directions when inserting the G7J to the Faston receptacle
or pulling the G7J out from the Faston receptacle. Do not attempt to
insert or pull out more than one G7J Unit together.
Mount the G7J with its test button facing downwards. The Relay may
malfunction due to shock if the test button faces upwards. Be careful
not to press the test button by mistake because the contacts will go
ON if the test button is pressed.
Do not solder the tab terminals.
Operating Coil
Internal Connections of Coils
Be sure to use the test button for test purposes only.
The test button is used for Relay circuit tests, such as a circuit conti-
nuity test. Do not attempt to switch the load with the test button. If a
voltage is applied to the coil, the test button will retract in an ON state
(i.e., an excited state).
DC coil
A2
A2
A1
A1
Micro Loads
AC coil
The G7J is used for switching power loads, such as motor, trans-
former, solenoid, lamp, and heater loads. Do not use the G7J for
switching minute loads, such as signals. Use a Relay with a bifur-
cated contact construction for switching micro loads, in which case,
however, only SPST-NO or SPST-NC output is obtained.
If a transistor drives the G7J, check the leakage current, and connect
a bleeder resistor if necessary.
Soldering PCB Terminals
Be sure to solder the PCB terminals manually only. In the case of
automatic soldering, some flux may stick to the test button and the
G7J. As a result, the G7J may malfunction.
The AC coil is provided with a built-in full-wave rectifier that prevens
contact chatter during a voltage drop. This circuit allows the relays to
withstand, with no vibration or shock, voltage drops to the coil of up
to 50% of the rated coil voltage for 1 second max.
The G7J is not of enclosed construction. Therefore, do not wash the
G7J with water or any detergent.
If a triac, such as an SSR, drives the AC coil of the G7J, the G7J may
not release. Be sure to perform a trial operation with the G7J and the
triac before applying them to actual use.
Connecting
Refer to the following diagram when connecting a wire with a screw
terminal to the G7J.
7.6
8.8
7
4.5
M3.5
304
General Purpose Relay G7J
Terms and Conditions of Sale
1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed
part of all quotes, agreements, purchase orders, acknowledgments, price lists,
catalogs, manuals, brochures and other documents, whether electronic or in
writing, relating to the sale of products or services (collectively, the "Products")
by Omron Electronics LLC and its subsidiary companies (“Omron”). Omron
objects to any terms or conditions proposed in Buyer’s purchase order or other
documents which are inconsistent with, or in addition to, these Terms.
2. Prices; Payment Terms. All prices stated are current, subject to change with-
out notice by Omron. Omron reserves the right to increase or decrease prices
on any unshipped portions of outstanding orders. Payments for Products are
due net 30 days unless otherwise stated in the invoice.
ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS.
BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR
INTENDED USE. Omron further disclaims all warranties and responsibility of
any type for claims or expenses based on infringement by the Products or oth-
erwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obli-
gation hereunder shall be, at Omron’s election, to (i) replace (in the form
originally shipped with Buyer responsible for labor charges for removal or
replacement thereof) the non-complying Product, (ii) repair the non-complying
Product, or (iii) repay or credit Buyer an amount equal to the purchase price of
the non-complying Product; provided that in no event shall Omron be responsi-
ble for warranty, repair, indemnity or any other claims or expenses regarding
the Products unless Omron’s analysis confirms that the Products were prop-
erly handled, stored, installed and maintained and not subject to contamina-
tion, abuse, misuse or inappropriate modification. Return of any Products by
Buyer must be approved in writing by Omron before shipment. Omron Compa-
nies shall not be liable for the suitability or unsuitability or the results from the
use of Products in combination with any electrical or electronic components,
circuits, system assemblies or any other materials or substances or environ-
ments. Any advice, recommendations or information given orally or in writing,
are not to be construed as an amendment or addition to the above warranty.
See http://www.omron247.com or contact your Omron representative for pub-
lished information.
3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices
sent to Buyer after deducting transportation charges, taxes and duties, and will
be allowed only if (i) the invoice is paid according to Omron’s payment terms
and (ii) Buyer has no past due amounts.
4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or
the maximum legal rate, whichever is less, on any balance not paid within the
stated terms.
5. Orders. Omron will accept no order less than $200 net billing.
6. Governmental Approvals. Buyer shall be responsible for, and shall bear all
costs involved in, obtaining any government approvals required for the impor-
tation or sale of the Products.
7. Taxes. All taxes, duties and other governmental charges (other than general
real property and income taxes), including any interest or penalties thereon, 14. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE
imposed directly or indirectly on Omron or required to be collected directly or
indirectly by Omron for the manufacture, production, sale, delivery, importa-
tion, consumption or use of the Products sold hereunder (including customs
duties and sales, excise, use, turnover and license taxes) shall be charged to
and remitted by Buyer to Omron.
FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY
WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS
BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual
price of the Product on which liability is asserted.
8. Financial. If the financial position of Buyer at any time becomes unsatisfactory
to Omron, Omron reserves the right to stop shipments or require satisfactory 15. Indemnities. Buyer shall indemnify and hold harmless Omron Companies and
security or payment in advance. If Buyer fails to make payment or otherwise
comply with these Terms or any related agreement, Omron may (without liabil-
ity and in addition to other remedies) cancel any unshipped portion of Prod-
ucts sold hereunder and stop any Products in transit until Buyer pays all
amounts, including amounts payable hereunder, whether or not then due,
which are owing to it by Buyer. Buyer shall in any event remain liable for all
unpaid accounts.
their employees from and against all liabilities, losses, claims, costs and
expenses (including attorney's fees and expenses) related to any claim, inves-
tigation, litigation or proceeding (whether or not Omron is a party) which arises
or is alleged to arise from Buyer's acts or omissions under these Terms or in
any way with respect to the Products. Without limiting the foregoing, Buyer (at
its own expense) shall indemnify and hold harmless Omron and defend or set-
tle any action brought against such Companies to the extent based on a claim
that any Product made to Buyer specifications infringed intellectual property
rights of another party.
9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation
unless Buyer indemnifies Omron against all related costs or expenses.
10. Force Majeure. Omron shall not be liable for any delay or failure in delivery 16. Property; Confidentiality. Any intellectual property in the Products is the exclu-
resulting from causes beyond its control, including earthquakes, fires, floods,
strikes or other labor disputes, shortage of labor or materials, accidents to
machinery, acts of sabotage, riots, delay in or lack of transportation or the
requirements of any government authority.
sive property of Omron Companies and Buyer shall not attempt to duplicate it
in any way without the written permission of Omron. Notwithstanding any
charges to Buyer for engineering or tooling, all engineering and tooling shall
remain the exclusive property of Omron. All information and materials supplied
by Omron to Buyer relating to the Products are confidential and proprietary,
and Buyer shall limit distribution thereof to its trusted employees and strictly
prevent disclosure to any third party.
11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron:
a.Shipments shall be by a carrier selected by Omron; Omron will not drop ship
except in “break down” situations.
b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall 17. Export Controls. Buyer shall comply with all applicable laws, regulations and
constitute delivery to Buyer;
licenses regarding (i) export of products or information; (iii) sale of products to
“forbidden” or other proscribed persons; and (ii) disclosure to non-citizens of
regulated technology or information.
c. All sales and shipments of Products shall be FOB shipping point (unless oth-
erwise stated in writing by Omron), at which point title and risk of loss shall
pass from Omron to Buyer; provided that Omron shall retain a security inter- 18. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right
est in the Products until the full purchase price is paid;
d.Delivery and shipping dates are estimates only; and
e.Omron will package Products as it deems proper for protection against nor-
mal handling and extra charges apply to special conditions.
and no course of dealing between Buyer and Omron shall operate as a waiver
of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder
without Omron's written consent. (c) Law. These Terms are governed by the
law of the jurisdiction of the home office of the Omron company from which
Buyer is purchasing the Products (without regard to conflict of law princi-
ples). (d) Amendment. These Terms constitute the entire agreement between
Buyer and Omron relating to the Products, and no provision may be changed
or waived unless in writing signed by the parties. (e) Severability. If any provi-
sion hereof is rendered ineffective or invalid, such provision shall not invalidate
any other provision. (f) Setoff. Buyer shall have no right to set off any amounts
against the amount owing in respect of this invoice. (g) Definitions. As used
herein, “including” means “including without limitation”; and “Omron Compa-
nies” (or similar words) mean Omron Corporation and any direct or indirect
subsidiary or affiliate thereof.
12. Claims. Any claim by Buyer against Omron for shortage or damage to the
Products occurring before delivery to the carrier must be presented in writing
to Omron within 30 days of receipt of shipment and include the original trans-
portation bill signed by the carrier noting that the carrier received the Products
from Omron in the condition claimed.
13. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the
Products will be free from defects in materials and workmanship for a period of
twelve months from the date of sale by Omron (or such other period expressed
in writing by Omron). Omron disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION,
EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL-
Certain Precautions on Specifications and Use
1. Suitability of Use. Omron Companies shall not be responsible for conformity
with any standards, codes or regulations which apply to the combination of the
Product in the Buyer’s application or use of the Product. At Buyer’s request,
ADDRESS THE RISKS, AND THAT THE OMRON’S PRODUCT IS PROP-
ERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
Omron will provide applicable third party certification documents identifying 2. Programmable Products. Omron Companies shall not be responsible for the
ratings and limitations of use which apply to the Product. This information by
itself is not sufficient for a complete determination of the suitability of the Prod- 3. Performance Data. Data presented in Omron Company websites, catalogs
user’s programming of a programmable Product, or any consequence thereof.
uct in combination with the end product, machine, system, or other application
or use. Buyer shall be solely responsible for determining appropriateness of
the particular Product with respect to Buyer’s application, product or system.
Buyer shall take application responsibility in all cases but the following is a
non-exhaustive list of applications for which particular attention must be given:
and other materials is provided as a guide for the user in determining suitabil-
ity and does not constitute a warranty. It may represent the result of Omron’s
test conditions, and the user must correlate it to actual application require-
ments. Actual performance is subject to the Omron’s Warranty and Limitations
of Liability.
(i) Outdoor use, uses involving potential chemical contamination or electrical 4. Change in Specifications. Product specifications and accessories may be
interference, or conditions or uses not described in this document.
(ii) Use in consumer products or any use in significant quantities.
(iii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety equip-
ment, and installations subject to separate industry or government regulations.
(iv) Systems, machines and equipment that could present a risk to life or prop-
erty. Please know and observe all prohibitions of use applicable to this Prod-
uct.
changed at any time based on improvements and other reasons. It is our prac-
tice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifica-
tions of the Product may be changed without any notice. When in doubt, spe-
cial part numbers may be assigned to fix or establish key specifications for
your application. Please consult with your Omron’s representative at any time
to confirm actual specifications of purchased Product.
5. Errors and Omissions. Information presented by Omron Companies has been
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors or omissions.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT
ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO
Note: This datasheet is provided as a guideline for selecting products. Do not use this document to operate the Unit.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ELECTRONICS LLC • THE AMERICAS HEADQUARTERS
Schaumburg, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com
OMRON CANADA, INC. • HEAD OFFICE
OMRON ARGENTINA • SALES OFFICE
Cono Sur • 54.11.4783.5300
Toronto, ON, Canada • 416.286.6465 • 866.986.6766 • www.omron247.com
OMRON CHILE • SALES OFFICE
OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICE
São Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br
Santiago • 56.9.9917.3920
OTHER OMRON LATIN AMERICA SALES
OMRON ELECTRONICS MEXICO SA DE CV • HEAD OFFICE
Apodaca, N.L. • 52.811.156.99.10 • 001.800.556.6766 • mela@omron.com
54.11.4783.5300
© 2009 Omron Electronics LLC
Cat. No. X301-E-01A
02/10
Specifications are subject to change without notice.
相关型号:
G7J-2A2B-P-AC100/120
Power/Signal Relay, 4PST, Momentary, 2600mW (Coil), 25A (Contact), 125VDC (Contact), AC Input, AC/DC Output, Through Hole-Straight Mount
OMRON
G7J-2A2B-P-AC200/240
Power/Signal Relay, 4PST, Momentary, 2600mW (Coil), 25A (Contact), 125VDC (Contact), AC Input, AC/DC Output, Through Hole-Straight Mount
OMRON
G7J-2A2B-P-AC24
Power/Signal Relay, 4PST, Momentary, 2600mW (Coil), 25A (Contact), 125VDC (Contact), AC Input, AC/DC Output, Through Hole-Straight Mount
OMRON
©2020 ICPDF网 联系我们和版权申明