G7L-1A-B-CB-DC48 [OMRON]
Power/Signal Relay, SPST, Momentary, 0.039A (Coil), 48VDC (Coil), 1900mW (Coil), DC Input, AC Output, Panel Mount,;
| 型号： | G7L-1A-B-CB-DC48 |
| 厂家： | 
OMRON ELECTRONICS LLC |
| 描述： | Power/Signal Relay, SPST, Momentary, 0.039A (Coil), 48VDC (Coil), 1900mW (Coil), DC Input, AC Output, Panel Mount, 继电器 |
| 文件： | 总14页 (文件大小：355K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
General Purpose Relay
G7L
• A high-capacity, high-withstand voltage relay compatible with
momentary voltage drops.
• No contact chattering for momentary voltage drops up to 50%
of rated voltage.
• UL Class B construction standard.
• Wide-range AC-activated coil that handles 100 to 120 VAC at
either 50 or 60 Hz.
• Miniature hinge for maximum switching capacity, particularly
for inductive loads.
• Flame resistant materials (UL94V-0-qualifying) used for
all insulation material.
• Quick-connect, screw, and PCB terminals available.
• Standard models are UL, CSA, and TUV approved; VDE
versions now available.
• Conforming to IEC 950.
Ordering Information
To Order: Select the part number and add the desired coil voltage rating (e.g., G7L-1A-T-CB-AC100/120).
Replaces G5D series.
Type
Contact form
SPST-NO
Model
Screw terminal
Quick-connect terminal
G7L-1A-T-CB (see note 1)
G7L-2A-T-CB (see note 1)
G7L-1A-TJ-CB (see note 1)
G7L-2A-TJ-CB (see note 1)
G7L-1A-TUB-CB
G7L-2A-TUB-CB
G7L-1A-TUBJ-CB
G7L-2A-TUBJ-CB
—
PCB terminal
E bracket
E bracket
G7L-1A-B-CB (see note 1)
G7L-2A-B-CB (see note 1)
G7L-1A-BJ-CB (see note 1)
G7L-2A-BJ-CB (see note 1)
G7L-1A-BUB-CB
G7L-2A-BUB-CB
G7L-1A-BUBJ-CB
G7L-2A-BUBJ-CB
—
—
—
—
—
—
—
—
—
DPST-NO
SPST-NO
DPST-NO
SPST-NO
DPST-NO
SPST-NO
DPST-NO
SPST-NO
DPST-NO
(with test button)
Upper bracket
Upper bracket
(with test button)
PCB mounting
G7L-1A-P-CB
G7L-2A-P-CB
—
—
Note: 1. E bracket or socket must be used for mounting (part number R99-07G5D). Refer to “Accessories” section for options and part numbers.
2. For VDE approved versions, please consult OMRON.
748
General Purpose Relay G7L
ꢀ Model Number Legend
G7L- ❏ ❏ - ❏ ❏ ❏ ❏
1 2
3 4 5 6
1. Contact form
1A: SPST-NO
2A: DPST-NO
3. Mounting construction
5. 80: VDE approved version
No symbol: E bracket type
(includes UL, CSA and TÜV)
UB:
Upper bracket type
6. CB: Class B insulation
7. Rated coil voltage
2. Terminal shape
4. Special functions
T: Quick-connect terminals
P: PCB terminals
No symbol: Without test button
J:
With test button
B: Screw terminals
ꢀ Accessories
Quick-connect Terminals
Description
Model
Model
Contact form
SPST-NO
G7L-1A-TJ
DPST-NO
G7L-2A-TJ
E-brackets
G7L-1A-T
G7L-2A-T
R99-07G5D
P7LF-D
Track mounting adaptor
Front connecting socket
Cover
P7LF-06 (see note)
P7LF-C
Screw Terminals
Description
Model
Model
Contact form
SPST-NO
G7L-1A-BJ
DPST-NO
G7L-2A-BJ
E-brackets
Track mounting adaptor
G7L-1A-B
G7L-2A-B
R99-07G5D
P7LF-D
Note: P7LF-C cover is supplied with the P7LF-06 socket.
Specifications
ꢀ Contact Data
Load
G7L-1A-T, G7L-1A-B
G7L-2A-T, G7L-2A-B
G7L-1A-P, G7L-2A-P
Resistive load
Inductive load
Resistive load
(cosφ = 1)
Inductive load
(cosφ = 0.4)
Resistive load
Inductive load
(cosφ = 0.4)
(cosφ = 1)
30 A, 220 VAC
Ag-alloy
(cosφ = 0.4)
(cosφ = 1)
Rated load
25 A, 220 VAC
20 A, 220 VAC
Contact material
Carry current
30 A
25 A
25 A
20 A
Max. operating voltage 250 VAC
Max. operating current 30 A
Max. switching capacity 6,600 VA
20 A
4,400 VA
5,500 VA
Min. permissible load
100 mA, 5 VDC
Note: P level: λ60 = 0.1 x 10-6 operation.
ꢀ Coil Internal Circuit
DC operating coil
AC operating coil
General Purpose Relay G7L
749
ꢀ Coil Data
AC
Rated voltage
(V)
Rated current
(mA)
Resistance
Must operate
75% max.
Must release
% of rated voltage
15% min.
Max. voltage
110% max.
Power
(Ω)
consumption
6
283
142
18.90
Approx.1.70
to 2.50 VA
12
75
24
71
303
50
34
1,310
5,260
21,000
100/120
200/240
17.00/20.40
8.50/10.20
75 volts
18 volts
36 volts
132 volts
264 volts
150 volts
DC
Rated voltage
(V)
Rated current
(mA)
Resistance
(Ω)
Must operate
75% max.
Must release
% of rated voltage
15% min.
Max. voltage
110% max.
Power
consumption
6
317
158
79
18.90
75
Approx.1.90 W
12
24
48
100
303
40
1,220
5,260
19
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C (73°F) with tolerances of +15%/-20% for AC rated cur-
rent and 15% for DC coil resistance.
2. Performance characteristic data are measured at a coil temperature of 23°C (73°F).
ꢀ Characteristics
Contact resistance
50 mΩ max.
Operate time
30 ms max.
Release time
30 ms max.
Max. operating
frequency
Mechanical
Electrical
1,800 operations/hour
1,800 operations/hour (under rated load)
1,000 MΩ min. (at 500 VDC)
Insulation resistance
Dielectric strength
4,000 VAC, min./5,000 VAC typical, 50/60 Hz for 1 minute between coil and contacts
2,000 VAC, 50/60 Hz for 1 minute between contacts of same pole
2,000 VAC, 50/60 Hz for 1 minute between contacts of different poles (DPST-NO type)
Between coil and contact: 10,000 V (impulse wave used: 1.20 x 50 µs)
10 to 55 Hz; 1.50 mm (0.06 in) double amplitude
Impulse withstand voltage
Vibration
Mechanical
durability
Malfunction
durability
10 to 55 Hz; 1.50 mm (0.06 in) double amplitude
1,000 m/s2 (approx. 100 G)
Shock
Mechanical
durability
1,000 m/s2 (approx.10 G)
Malfunction
durability
Life expectancy
Mechanical
Electrical
5,000,000 operations min. (at 1,800 operations/hour)
100,000 operations min. (at 1,800 operations/hour under rated load)
-20° to 85°C (-4° to 185°F)
Ambient temperature
Humidity
35% to 85% RH
Weight
Quick-connect terminal type: approx. 90 g (3.17 oz)
PCB terminal type: approx. 100 g (3.52 oz)
Screw terminal type: approx. 120 g (4.23 oz)
Note: Data shown are of initial value.
750
General Purpose Relay G7L
ꢀ Characteristic Data
Maximum switching capacity
Electrical service life
Switching voltage (V)
Switching current (A)
Dimensions
Unit: mm (inch)
ꢀ Relays
G7L-1A-T
(E Bracket Attached)*
Terminal arrangement/
Internal connections
(Top view)
Mounting holes
(Bottom view)
G7L-2A-T
(E Bracket Attached)*
Terminal arrangement/
Internal connections
(Top view)
Mounting holes
(Bottom view)
* E bracket must be ordered separately.
General Purpose Relay G7L
751
G7L-1A-TJ
(E Bracket Attached)*
Terminal arrangement/
Internal connections
(Top view)
Mounting holes
(Bottom view)
G7L-2A-TJ
(E Bracket Attached)*
Terminal arrangement/
Internal connections
(Top view)
Mounting holes
(Bottom view)
G7L-1A-TUB
Terminal arrangement/
Internal connections
(Top view)
Mounting holes
(Bottom view)
G7L-2A-TUB
Terminal arrangement/
Internal connections
(Top view)
Mounting holes
(Bottom view)
*E bracket must be ordered separately.
752
General Purpose Relay G7L
Unit: mm (inch)
G7L-1A-TUBJ
Terminal arrangement/
Internal connections
(Top view)
Mounting holes
(Bottom view)
G7L-2A-TUBJ
Terminal arrangement/
Internal connections
(Top view)
Mounting holes
(Bottom view)
G7L-1A-B
(E bracket Attached)*
Terminal arrangement/
Internal connections
(Top view)
Mounting holes
(Bottom view)
G7L-2A-B
(E bracket Attached)*
Terminal arrangement/
Internal connections
(Top view)
Mounting holes
(Bottom view)
* E bracket must be ordered separately.
General Purpose Relay G7L
753
G7L-1A-BJ
(E bracket Attached)*
Terminal arrangement/
Internal connections
(Top view)
Mounting holes
(Bottom view)
G7L-2A-BJ
(E bracket Attached)*
Terminal arrangement/
Internal connections
(Top view)
Mounting holes
(Bottom view)
G7L-1A-BUB
Terminal arrangement/
Internal connections
(Top view)
Mounting holes
(Bottom view)
G7L-2A-BUB
Terminal arrangement/
Internal connections
(Top view)
Mounting holes
(Bottom view)
* E bracket must be ordered separately.
754
General Purpose Relay G7L
Unit: mm (inch)
G7L-1A-BUBJ
Terminal arrangement/
Internal connections
(Top view)
Mounting holes
(Bottom view)
G7L-2A-BUBJ
Mounting holes
(Bottom view)
Terminal arrangement/
Internal connections
(Top view)
G7L-1A-P
Terminal arrangement/
Internal connections
(Top view)
Mounting holes
(Bottom view)
G7L-2A-P
Terminal arrangement/
Internal connections
(Top view)
Mounting holes
(Bottom view)
General Purpose Relay G7L
755
ꢀ Accessories
E bracket
R99-07G5D
Mounting holes
(Bottom view)
Adaptor
P7LF-D
Mounting holes
(Bottom view)
Front connecting socket
P7LF-06
Mounting holes
(Bottom view)
Note: 1. To protect against electric shock, use the P7LF-C cover on terminals.
2. P7LF-C cover is supplied with P7LF-06 socket.
756
General Purpose Relay G7L
Unit: mm (inch)
Cover
P7LF-C
Note: P7LF-C cover is supplied with P7LF-06 socket.
Mounting track
PFP-100N, PFP-50N
PFP-100N2
Note: 1. It is recommended that a panel thickness of 1.60 to 2.00 mm (0.06 to 0.08 in) be used.
2. L = Length
PFP-100N ................... L = 1 m (39.00 in)
PFP-50N
................... L = 50 cm (19.60 in)
PFP-100N2 ................... L = 1 m (39.00 in)
End plate
PFP-M
Spacer
PFP-S
General Purpose Relay G7L
757
ꢀ Approvals
UL recognized type (File No. E41643)/CSA certified type (File No. LR35535)
Type
G7L-1A-T-CB
G7L-1A-TJ-CB
G7L-1A-TUB-CB
G7L-1A-TUBJ-CB
G7L-1A-B-CB
G7L-1A-BJ-CB
G7L-1A-BUB-CB
G7L-1A-BUBJ-CB
G7L-1A-P-CB
Contact form
Terminal type
Contact ratings
30 A, 277 VAC, General Use, 100,000 c
1.5 kW, 120 VAC, Tungsten
SPST-NO
Quick-connect
1.5 HP, 120 VAC
3 HP, 240/265/277 VAC, 100,000 c
20 FLA/120 LRA, 120 VAC, 30,000 c
17 FLA/102 LRA, 277 VAC, 30,000 c
TV-10, 120 VAC
20 A (2.4 kW), 120 VAC, Tungsten
20 A, (4.8 kW), 240 VAC, Tungsten 6,000
20 A, 277 VAC, Ballast 10,000 c
Screw
PCB
G7L-2A-T-CB
DPST-NO
Quick-connect
G7L-2A-TJ-CB
G7L-2A-TUB-CB
G7L-2A-TUBJ-CB
G7L-2A-B-CB
G7L-2A-BJ-CB
G7L-2A-BUB-CB
G7L-2A-BUBJ-CB
G7L-2A-P-CB
Screw
PCB
TÜV (File No. R9251551)
Type
Contact form
SPST-NO
Coil ratings
Terminal type
Contact ratings
G7L-1A-T-CB
G7L-1A-TJ-CB
G7L-1A-TUB-CB
G7L-1A-TUBJ-CB
G7L-1A-B-CB
G7L-1A-BJ-CB
G7L-1A-BUB-CB
G7L-1A-BUBJ-CB
G7L-1A-P-CB
6, 12, 24, 48,
100, 110, 200,
220 VDC
Quick-connect
25 A, 240 VAC, (cosφ = 1)
25 A, 240 VAC, (cosφ = 0.4)
12, 24, 50,
100/120, 200/240
VAC
Screw
30 A, 240 VAC, (cosφ = 1)
25 A, 240 VAC, (cosφ = 0.4)
30 A, 240 VAC, (cosφ = 0.4)
PCB
20 A, 240 VAC, (cosφ = 1)
20 A, 240 VAC, (cosφ = 0.4)
25 A, 240 VAC, (cosφ = 1)
25 A, 240 VAC, (cosφ = 0.4)
G7L-2A-T-CB
DPST-NO
Quick-connect
G7L-2A-TJ-CB
G7L-2A-TUB-CB
G7L-2A-TUBJ-CB
G7L-2A-B-CB
G7L-2A-BJ-CB
G7L-2A-BUB-CB
G7L-2A-BUBJ-CB
G7L-2A-P-CB
Screw
PCB
25 A, 240 VAC, (cosφ = 1)
25 A, 240 VAC, (cosφ = 0.4)
20 A, 240 VAC, (cosφ = 1)
20 A, 240 VAC, (cosφ = 0.4)
VDE recognized type (Licence no. 1530 UG)
Note: 1. Please consult OMRON for details of VDE approvals.
2. The G7L relay conforms to the following standards: Electrical safety: DIN IEC 255 Teil 1-00/DIN VDE 0435 Teil 201/05. 83
DIN VDE 0435 Teil 201 A1/05. 90
DIN IEC 255 Teil 0-20/DIN VDE 0435 Teil 120/10. 81
DIN EN 60 950/VDE 0805/11. 93
EMC:
prEN 50082-2, EN 55022
3. The rated values approved by each of the safety standards (e.g., UL and CSA) may be different from the performance characteristics
individually defined in this catalog.
4. In the interest of product improvement, specifications are subject to change.
758
General Purpose Relay G7L
Precautions
ꢀ Handling
ꢀ Operating Coil
• To preserve initial performance, do not drop or otherwise subject
• As a rule, either a battery or a DC power supply with a maximum
5% ripple is used for the operating voltage for DC relays. Before
using a rectified AC supply, confirm that the ripple is not greater
than 5%. Ripple greater than this can lead to variations in the oper-
ating and reset voltages.
the power relay to shock.
• The case is not designed to be removed during normal handling
and operation. Doing so may affect performance.
• Use the power relay in a dry environment free from excessive dust,
As excessive ripple can generate beats, the insertion of a smooth-
ing capacitor is recommended as shown below.
SO2, H2S, or organic gas.
• Do not allow a voltage greater than the maximum allowable coil
voltage to be applied continuously.
• Do not use the power relay outside of specified voltages and cur-
rents.
• Do not allow the ambient operating temperature to exceed the
specified limit.
ꢀ Installation
• Although there are not specific limits on the installation site, it
should be as dry and dust-free as possible.
• PCB terminal-equipped relays weigh approximately 100 g. Be sure
that the PCB is strong enough to support them. We recommend
dual-side through-hole PCBs to reduce solder cracking from heat
stress.
• Quick-connect terminals can be connected to fast on receptacle
#250 and positive-lock connectors.
• Allow suitable slack on leads when wiring, and do not subject the
terminals to excessive force.
• When driving a transistor, check the leakage current and connect a
bleeder resistor if necessary.
ꢀ Cleaning PCB Terminals
• PCB terminals have semi-sealed construction which prevents flux
from entering the relay base. It is recommended that the user
should apply a tape seal over the vent hole prior to wave soldering
or cleaning. The tape should then be removed after processing.
• Momentary voltage drops on coil input voltage should not exceed
one second duration after contact mating with no shock or vibra-
tion.
ꢀ Applications
• Compressors for package air conditioners and heater switching
controllers
• Switching controllers for power tools or motors
• Power controllers for water heaters
• Power controllers for dryers
• Lamp control, motor drivers, and power supply switching in copy
machines, facsimiles, and other OA equipment
• Lighting controllers
• Power controllers for packers or food processing equipment
• Magnetron control in microwaves
General Purpose Relay G7L
759
Terms and Conditions of Sale
1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed 12. Warranties. (a) Exclusive Warranty. Seller's exclusive warranty is that the
part of all quotations, acknowledgments, invoices, purchase orders and other
documents, whether electronic or in writing, relating to the sale of products or
services (collectively, the "Products") by Omron Electronic Components LLC
("Seller"). Seller hereby objects to any terms or conditions proposed in
Buyer's purchase order or other documents which are inconsistent with, or in
addition to, these Terms.
Products will be free from defects in materials and workmanship for a period of
twelve months from the date of sale by Seller (or such other period expressed
in writing by Seller). Seller disclaims all other warranties, express or implied.
(b) Limitations. SELLER MAKES NO WARRANTY OR REPRESENTATION,
EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL-
ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS.
BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR
INTENDED USE. Seller further disclaims all warranties and responsibility of
any type for claims or expenses based on infringement by the Products or oth-
erwise of any intellectual property right. (c) Buyer Remedy. Seller's sole obli-
gation hereunder shall be to replace (in the form originally shipped with Buyer
responsible for labor charges for removal or replacement thereof) the non-
complying Product or, at Seller's election, to repay or credit Buyer an amount
equal to the purchase price of the Product; provided that in no event shall
Seller be responsible for warranty, repair, indemnity or any other claims or
expenses regarding the Products unless Seller's analysis confirms that the
Products were properly handled, stored, installed and maintained and not sub-
ject to contamination, abuse, misuse or inappropriate modification. Return of
any Products by Buyer must be approved in writing by Seller before shipment.
Seller shall not be liable for the suitability or unsuitability or the results from the
use of Products in combination with any electrical or electronic components,
circuits, system assemblies, or any other materials or substances or environ-
ments. Any advice, recommendations or information given orally or in writing
are not to be construed as an amendment or addition to the above warranty.
2. Prices; Payment. All prices stated are current, subject to change without
notice by Seller. Buyer agrees to pay the price in effect at time of shipment.
Payments for Products received are due net 30 days unless otherwise stated
in the invoice.
3. Discounts. Cash discounts, if any, will apply only on the net amount of
invoices sent to Buyer after deducting transportation charges, taxes and
duties, and will be allowed only if (i) the invoice is paid according to Seller's
payment terms and (ii) Buyer has no past due amounts owing to Seller.
4. Currencies. If the prices quoted herein are in a currency other than U.S. dol-
lars, Buyer shall make remittance to Seller at the then current exchange rate
most favorable to Seller and which is available on the due date; provided that if
remittance is not made when due, Buyer will convert the amount to U.S. dol-
lars at the then current exchange rate most favorable to Seller available during
the period between the due date and the date remittance is actually made.
5. Governmental Approvals. Buyer shall be responsible for, and shall bear all
costs involved in, obtaining any government approvals required for the impor-
tation or sale of the Products.
6. Taxes. All taxes, duties and other governmental charges (other than general
real property and income taxes), including any interest or penalties thereon,
imposed directly or indirectly on Seller or required to be collected directly or 13. Limitation on Liability; Etc. SELLER SHALL NOT BE LIABLE FOR SPECIAL,
indirectly by Seller for the manufacture, production, sale, delivery, importation,
consumption or use of the Products sold hereunder (including customs duties
and sales, excise, use, turnover and license taxes) shall be charged to and
remitted by Buyer to Seller.
INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CON-
NECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN
CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in
no event shall liability of Seller exceed the individual price of the Product on
which liability is asserted.
7. Financial. If the financial position of Buyer at any time becomes unsatisfactory
to Seller, Seller reserves the right to stop shipments or require satisfactory
security or payment in advance. If Buyer fails to make payment or otherwise 14. Indemnities. Buyer shall indemnify and hold harmless Seller, its affiliates and
comply with these Terms or any related agreement, Seller may (without liability
and in addition to other remedies) cancel any unshipped portion of Products
sold hereunder and stop any Products in transit until Buyer pays all amounts,
including amounts payable hereunder, whether or not then due, which are
owing to it by Buyer. Buyer shall in any event remain liable for all unpaid
accounts.
its employees from and against all liabilities, losses, claims, costs and
expenses (including attorney's fees and expenses) related to any claim, inves-
tigation, litigation or proceeding (whether or not Seller is a party) which arises
or is alleged to arise from Buyer's acts or omissions under these Terms or in
any way with respect to the Products. Without limiting the foregoing, Buyer (at
its own expense) shall indemnify and hold harmless Seller and defend or settle
any action brought against Seller to the extent that it is based on a claim that
any Product made to Buyer specifications infringed intellectual property rights
of another party.
8. Cancellation; Etc. Orders are not subject to rescheduling or cancellation
unless Buyer indemnifies Seller fully against all costs or expenses arising in
connection therewith.
9. Force Majeure. Seller shall not be liable for any delay or failure in delivery 15. Property; Confidentiality. The intellectual property embodied in the Products is
resulting from causes beyond its control, including earthquakes, fires, floods,
strikes or other labor disputes, shortage of labor or materials, accidents to
machinery, acts of sabotage, riots, delay in or lack of transportation or the
requirements of any government authority.
the exclusive property of Seller and its affiliates and Buyer shall not attempt to
duplicate it in any way without the written permission of Seller. Notwithstand-
ing any charges to Buyer for engineering or tooling, all engineering and tooling
shall remain the exclusive property of Seller. All information and materials sup-
plied by Seller to Buyer relating to the Products are confidential and propri-
etary, and Buyer shall limit distribution thereof to its trusted employees and
strictly prevent disclosure to any third party.
10. Shipping; Delivery. Unless otherwise expressly agreed in writing by Seller:
1. Shipments shall be by a carrier selected by Seller;
2. Such carrier shall act as the agent of Buyer and delivery to such carrier
shall constitute delivery to Buyer;
16. Miscellaneous. (a) Waiver. No failure or delay by Seller in exercising any right
and no course of dealing between Buyer and Seller shall operate as a waiver
of rights by Seller. (b) Assignment. Buyer may not assign its rights hereunder
without Seller's written consent. (c) Law. These Terms are governed by Illi-
nois law (without regard to conflict of law principles). Federal and state courts
in Illinois shall have exclusive jurisdiction for any dispute hereunder.
(d) Amendment. These Terms constitute the entire agreement between Buyer
and Seller relating to the Products, and no provision may be changed or
waived unless in writing signed by the parties. (e) Severability. If any provision
hereof is rendered ineffective or invalid, such provision shall not invalidate any
other provision. (f) Setoff. Buyer shall have no right to set off any amounts
against the amount owing in respect of this invoice.. (g) Definitions. As used
herein, "including" means "including without limitation".
3. All sales and shipments of Products shall be FOB shipping point (unless
otherwise stated in writing by Seller), at which point title to and all risk of
loss of the Products shall pass from Seller to Buyer, provided that Seller
shall retain a security interest in the Products until the full purchase price is
paid by Buyer;
4. Delivery and shipping dates are estimates only.
5. Seller will package Products as it deems proper for protection against
normal handling and extra charges apply to special conditions.
11. Claims. Any claim by Buyer against Seller for shortage or damage to the
Products occurring before delivery to the carrier must be presented in writing
to Seller within 30 days of receipt of shipment and include the original trans-
portation bill signed by the carrier noting that the carrier received the Products
from Seller in the condition claimed.
Certain Precautions on Specifications and Use
1. Suitability for Use. Seller shall not be responsible for conformity with any stan- 2. Programmable Products. Seller shall not be responsible for the user's
dards, codes or regulations which apply to the combination of the Product in
programming of a programmable product, or any consequence thereof.
Buyer's application or use of the Product. At Buyer's request, Seller will pro- 3. Performance Data. Performance data given in this publication is provided as a
vide applicable third party certification documents identifying ratings and limita-
tions of use which apply to the Product. This information by itself is not
sufficient for a complete determination of the suitability of the Product in combi-
nation with the end product, machine, system, or other application or use.
guide for the user in determining suitability and does not constitute a warranty
It may represent the result of Seller's test conditions, and the users must corre
late it to actual application requirements. Actual performance is subject to
Seller's Warranty and Limitations of Liability.
Buyer shall be solely responsible for determining appropriateness of the partic- 4. Change in Specifications. Product specifications and accessories may be
ular Product with respect to Buyer's application, product or system. Buyer
shall take application responsibility in all cases but the following is a non-
exhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii)Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety
equipment, and installations subject to
changed at any time based on improvements and other reasons. It is our prac
tice to change part numbers when published ratings or features are changed
or when significant construction changes are made. However, some specifica
tions of the Product may be changed without any notice. When in doubt, spe
cial part numbers may be assigned to fix or establish key specifications for you
application. Please consult with your Seller representative at any time to con
firm actual specifications of purchased Product.
5. Errors and Omissions. The information in this publication has been carefully
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors, or omissions.
6. RoHS Compliance. Where indicated, our products currently comply, to the bes
of our knowledge as of the date of this publication, with the requirements of the
European Union's Directive on the Restriction of certain Hazardous Sub
stances ("RoHS"), although the requirements of RoHS do not take effect unti
July 2006. These requirements may be subject to change. Please consult ou
website for current information.
separate industry or government regulations.
(iii)Use in consumer products or any use in significant quantities.
(iv)Systems, machines and equipment that could present a risk to life or
property. Please know and observe all prohibitions of use applicable to this
product.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT
THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE
INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website
at www.components.omron.com – under the “About Us” tab, in the Legal Matters section.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.components.omron.com
Canada - http://www.omron.ca
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
OMRON CANADA, INC.
885 Milner Avenue
Toronto, Ontario M1B 5V8
416-286-6465
847-882-2288
Cat. No. JB301-E3-01
3/05
Specifications subject to change without notice
Printed in USA
相关型号：
©2020 ICPDF网 联系我们和版权申明