GX-F12A-P [OMRON]
Rectangular-shaped Inductive Proximity Sensor;
| 型号： | GX-F12A-P |
| 厂家： | 
OMRON ELECTRONICS LLC |
| 描述： | Rectangular-shaped Inductive Proximity Sensor |
| 文件： | 总16页 (文件大小：1582K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Amplifier Built-in
Rectangular-shaped Inductive Proximity Sensor
761
GX-F/H SERIES
■General terms and conditions........... F-17
■Glossary of terms........................ P.1386~
■Sensor selection guide ................. P.757~
■General precautions ..................... P.1405
FIBER
SENSORS
Related Information
LASER
SENSORS
PHOTOELECTRIC
SENSORS
Conforming to
EMC Directive
MICRO
PHOTOELECTRIC
SENSORS
AREA
SENSORS
LIGHT
CURTAINS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE SENSORS
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS
panasonic-electric-works.net/sunx
PNP output
type available
Oil resistant
Different freq.
type available
STATIC CONTROL
DEVICES
ENDOSCOPE
* Based on research conducted by Panasonic Electric Works SUNX
as of August 2010 among equivalent rectangular inductive sensors.
Industry No. 1* in stable sensing
LASER
MARKERS
PLC /
TERMINALS
Can be installed with ample space
HUMAN MACHINE
INTERFACES
This sensor has the longest stable sensing range among the same level of rectangular inductive proximity sensors in
the industry. It is easy to install the sensor.
ENERGY CONSUMPTION
VISUALIZATION
COMPONENTS
Stable sensing range
Maximum
operation
distance
Maximum operation distance
Stable sensing range
Type
FA COMPONENTS
GX-F/H
Previous model
series
MACHINE VISION
SYSTEMS
1.6 mm 0.063 in
2.5 mm 0.098 in
4.0 mm 0.157 in
5.0 mm 0.197 in
8.0 mm 0.315 in
0 to 1.3 mm 0.051 in
0 to 2.1 mm 0.083 in
0 to 3.3 mm 0.130 in
0 to 4.2 mm 0.165 in
0 to 6.7 mm 0.264 in
0 to 1.2 mm 0.047 in
0 to 1.8 mm 0.709 in
0 to 3.0 mm 0.118 in
0 to 4.0 mm 0.157 in
0 to 6.4 mm 0.252 in
GX-□6
GX-□8
GX-□12
GX-□15
GX-F/H
series
UV CURING
SYSTEMS
Previous
model
Long sensing
range
Selection
Guide
Amplifier
Built-in
Amplifier-
separated
* With standard sensing object
Variation at the maximum operation distance is within ±8 %
Temperature characteristics vary within ±8 %
Thorough adjustment and control of sensing sensitivity
greatly reduces individual sensor differences and
variations.
The work of adjusting sensor positions when using
multiple sensors and when sensors have been replaced
is much easier.
Components such as the sensor coil and core and
product design have been totally revised to provide
excellent temperature characteristics.
Stable sensing can be obtained regardless of the time of
day or the yearly season.
GX-F/H
GXL
GL
GX-U/GX-FU/
GX-N
GX-F/H series
Example: GX-□8
GX
Previous models
16.0
0.4 mm 0.016 in or less
14.0
Sensing range within temperatures
Operation distance variation: 0.4 mm 0.016 in or less*
12.0
of –25 to +70 °C
10.0
(–13 to +158 °F) are within
8.0
8 % of the range at +23 °C (+73 °F)
For the
6.0
Previous models:
23 °C
73 °F
GX-□8
(
+15
)
Standard
4.0
2.0
within
%
–10
sensing object
Maximum operation distance: 2.5 mm 0.098 in 8 ꢀ
60%
0.0
–2.0
less
(2.3 to 2.7 mm 0.091 to 0.106 in)
–20 –10
0
10 20 30 40 50 60 70
1.0 mm 0.039 in or less
Operation distance variation: 1.0 mm 0.039 in or less
–4 14 32 50 68 86 104 122 140 158
Ambient temperature [°C °F]
Standard
Previous
model
sensing
object
* Typical
Maximum operation distance: 2.5 mm 0.098 in 20 ꢀ
(2.0 to 3.0 mm 0.079 to 0.118 in)
Image
* Not including temperature characteristics.
Rectangular-shaped Inductive Proximity Sensor GX-F/HSERIES
762
APPLICATIONS
FIBER
SENSORS
LASER
SENSORS
Muting control of light curtains
Positioning processing equipment
Positioning metal pallets
PHOTOELECTRIC
SENSORS
MICRO
PHOTOELECTRIC
SENSORS
AREA
SENSORS
LIGHT
CURTAINS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE SENSORS
ENVIRONMENTAL RESISTANCE
SENSOR
OPTIONS
10 times the durability! (Compared to previous models)
SIMPLE
WIRE-SAVING
UNITS
The new integrated construction method used provides shock resistance of 10,000 m/s2 (approx. 1,000 G in X, Y and Z directions
for three times each), and vibration resistance clears durability tests of between 10 and 500 Hz (3 mm 0.118 in amplitude in X, Y
and Z directions for 2 hours each). In addition, resistance to impulse noise is approx. three times greater than for previous models.
WIRE-SAVING
SYSTEMS
Checking up / down
operation of
compact molding
equipment
Sensing presence of metallic
objects on a part feeder
MEASUREMENT
SENSORS
STATIC CONTROL
DEVICES
ENDOSCOPE
LASER
MARKERS
Shock resistance:
1,000 G
PLC /
TERMINALS
Vibration resistance: 500 Hz
HUMAN MACHINE
INTERFACES
FUNCTIONS
Highly resistant to water or oil!
IP68g* protective construction
ENERGY CONSUMPTION
VISUALIZATION
COMPONENTS
Indicators are easy to see over a wide field of view
The new integrated construction method used improves
environmental resistance performance.
The IP68g prevents damage to the sensor by stopping
water and oil getting inside.
A prism with a wide field of view has been developed. This
has greatly improved the visibility of the operation indicators.
GX-H□
FA COMPONENTS
MACHINE VISION
SYSTEMS
* For details, refer to the “SPECIFICATIONS”.
UV CURING
SYSTEMS
GX-F□
Selection
Guide
Amplifier
Built-in
Amplifier-
separated
GX-F/H
GXL
MOUNTING
GL
Tightening strength increased with no damage! (excluding GX-□6)
Conductor thickness doubled to make wiring much easier! (GX-□6/□8 only)
GX-U/GX-FU/
GX-N
A metal sleeve has been inserted.
It prevents the sensor from being damaged by tightening
too much.
The conductor’s thickness was doubled for the GX-□6/□8.
This makes it easier to handle and perform crimping
work on the cables. In addition, the tensile strength of the
crimping area has become higher.
GX
GX-□8, GX-□12
GX-□15
0.08 mm2
0.15 mm2
Metal sleeve
Previous model
GX-□8
Metal sleeve
Approx. 1.4 times
greater than before
Conductor thickness approx.
2 times greater
M3 screw
M3 screw
Tightening torque: 0.7 N ∙ m or less Tightening torque: 1 N ∙ m or less
Rectangular-shaped Inductive Proximity Sensor GX-F/HSERIES
763
FIBER
ORDER GUIDE
SENSORS
LASER
SENSORS
GX-6 type
PHOTO-
ELECTRIC
SENSORS
Model No.
(Note 2)
Type
Appearance (mm in)
Sensing range (Note 1)
Output
Output operation
Normally open
Normally closed
Normally open
Normally closed
Normally open
Normally closed
Normally open
Normally closed
MICRO
PHOTO-
ELECTRIC
SENSORS
GX-F6A
AREA
GX-F6AI
SENSORS
6
0.236
24.5
GX-F6B
LIGHT
0.965
6 0.236
CURTAINS
GX-F6BI
NPN open-collector
transistor
PRESSURE /
FLOW
GX-H6A
SENSORS
GX-H6AI
GX-H6B
Maximum
operation distance
INDUCTIVE
PROXIMITY
SENSORS
6
0.236
25
0.984
1.6 mm 0.063 in
PARTICULAR
USE
6
0.236
GX-H6BI
GX-F6A-P
GX-F6AI-P
GX-F6B-P
GX-F6BI-P
GX-H6A-P
GX-H6AI-P
GX-H6B-P
GX-H6BI-P
SENSORS
(0 to 1.3 mm 0 to 0.051 in)
SENSOR
OPTIONS
6
0.236
0.236
SIMPLE
WIRE-SAVING
UNITS
Stable sensing range
24.5
0.965
6
PNP open-collector
transistor
WIRE-SAVING
SYSTEMS
MEASURE-
MENT
SENSORS
6
0.236
0.236
25
0.984
STATIC
CONTROL
DEVICES
6
Notes: 1) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object.
ENDOSCOPE
The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient
temperature drift and/or supply voltage fluctuation.
2) “ I ” in the model No. indicates a different frequency type.
LASER
MARKERS
PLC /
TERMINALS
GX-8 type
HUMAN
MACHINE
INTERFACES
Model No.
(Note 2)
ENERGY
CONSUMPTION
VISUALIZATION
COMPONENTS
Type
Appearance (mm in)
Sensing range (Note 1)
Output
Output operation
Normally open
Normally closed
Normally open
Normally closed
Normally open
Normally closed
Normally open
Normally closed
GX-F8A
FA
COMPONENTS
GX-F8AI
7.4 0.291
23
MACHINE
VISION
GX-F8B
SYSTEMS
8 0.315
0.906
GX-F8BI
UV
CURING
NPN open-collector
transistor
SYSTEMS
GX-H8A
GX-H8AI
GX-H8B
Maximum
operation distance
8.2 0.323
8 0.315
25
0.984
Selection
Guide
2.5 mm 0.098 in
GX-H8BI
GX-F8A-P
GX-F8AI-P
GX-F8B-P
GX-F8BI-P
GX-H8A-P
GX-H8AI-P
GX-H8B-P
GX-H8BI-P
Amplifier
Built-in
(0 to 2.1 mm 0 to 0.083 in)
Amplifier-
separated
7.4 0.291
8 0.315
Stable sensing range
23
0.906
GX-F/H
GXL
GL
PNP open-collector
transistor
GX-U/GX-FU/
GX-N
8.2 0.323
8 0.315
25
0.984
GX
Notes: 1) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object.
The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient
temperature drift and/or supply voltage fluctuation.
2) “ I ” in the model No. indicates a different frequency type.
Rectangular-shaped Inductive Proximity Sensor GX-F/HSERIES
764
ORDER GUIDE
FIBER
SENSORS
LASER
SENSORS
GX-12 type
PHOTO-
ELECTRIC
SENSORS
Model No.
(Note 2)
Type
Appearance (mm in)
Sensing range (Note 1)
Output
Output operation
Normally open
Normally closed
Normally open
Normally closed
Normally open
Normally closed
Normally open
Normally closed
MICRO
PHOTO-
ELECTRIC
SENSORS
GX-F12A
AREA
GX-F12AI
GX-F12B
SENSORS
7.1 0.280
27.8
LIGHT
12
1.094
0.472
CURTAINS
GX-F12BI
GX-H12A
NPN open-collector
transistor
PRESSURE /
FLOW
SENSORS
GX-H12AI
GX-H12B
INDUCTIVE
PROXIMITY
SENSORS
12 0.472
Maximum
operation distance
27.4
1.079
12 0.472
PARTICULAR
USE
4.0 mm 0.157 in
GX-H12BI
GX-F12A-P
GX-F12AI-P
GX-F12B-P
GX-F12BI-P
GX-H12A-P
GX-H12AI-P
GX-H12B-P
GX-H12BI-P
SENSORS
(0 to 3.3 mm 0 to 0.130 in)
SENSOR
OPTIONS
7.1 0.280
SIMPLE
Stable sensing range
WIRE-SAVING
UNITS
27.8
1.094
12
0.472
PNP open-collector
transistor
WIRE-SAVING
SYSTEMS
MEASURE-
MENT
12 0.472
12 0.472
SENSORS
27.4
1.079
STATIC
CONTROL
DEVICES
Notes: 1) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object.
ENDOSCOPE
The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient
temperature drift and/or supply voltage fluctuation.
2) “ I ” in the model No. indicates a different frequency type.
LASER
MARKERS
PLC /
TERMINALS
GX-15 type
HUMAN
MACHINE
INTERFACES
Model No.
(Note 2)
ENERGY
Type
Appearance (mm in)
Sensing range (Note 1)
Output
Output operation
Normally open
Normally closed
Normally open
Normally closed
Normally open
Normally closed
Normally open
Normally closed
CONSUMPTION
VISUALIZATION
COMPONENTS
GX-F15A
FA
COMPONENTS
GX-F15AI
GX-F15B
8 0.315
0.591
MACHINE
VISION
31.5
SYSTEMS
1.240
15
GX-F15BI
GX-H15A
UV
NPN open-collector
transistor
CURING
SYSTEMS
16.5 0.650
15 0.591
GX-H15AI
GX-H15B
Maximum
operation distance
29.5
1.161
Selection
Guide
5.0 mm 0.197 in
GX-H15BI
GX-F15A-P
GX-F15AI-P
GX-F15B-P
GX-F15BI-P
GX-H15A-P
GX-H15AI-P
GX-H15B-P
GX-H15BI-P
Amplifier
Built-in
(0 to 4.2 mm 0 to 0.165 in)
Amplifier-
separated
8 0.315
Stable sensing range
31.5
GX-F/H
GXL
GL
1.240
0.591
15
PNP open-collector
transistor
16.5 0.650
15 0.591
GX-U/GX-FU/
GX-N
29.5
1.161
GX
Notes: 1) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object.
The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an
ambient temperature drift and/or supply voltage fluctuation.
2) “ I ” in the model No. indicates a different frequency type.
Rectangular-shaped Inductive Proximity Sensor GX-F/HSERIES
765
FIBER
ORDER GUIDE
SENSORS
LASER
SENSORS
GX-15 (Long sensing range) type
PHOTO-
ELECTRIC
SENSORS
Model No.
(Note 2)
Type
Appearance (mm in)
Sensing range (Note 1)
Output
Output operation
Normally open
Normally closed
Normally open
Normally closed
Normally open
Normally closed
Normally open
Normally closed
MICRO
PHOTO-
ELECTRIC
SENSORS
GX-FL15A
AREA
SENSORS
GX-FL15AI
GX-FL15B
8 0.315
0.591
LIGHT
31.5
CURTAINS
1.240
15
GX-FL15BI
GX-HL15A
NPN open-collector
transistor
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
16.5 0.650
15 0.591
GX-HL15AI
GX-HL15B
Maximum
operation distance
29.5
1.161
PARTICULAR
USE
8.0 mm 0.315 in
(0 to 6.7 mm 0 to 0.264 in)
Stable sensing range
GX-HL15BI
GX-FL15A-P
GX-FL15AI-P
GX-FL15B-P
GX-FL15BI-P
GX-HL15A-P
GX-HL15AI-P
GX-HL15B-P
GX-HL15BI-P
SENSORS
SENSOR
OPTIONS
8 0.315
SIMPLE
WIRE-SAVING
UNITS
31.5
1.240
0.591
15
WIRE-SAVING
SYSTEMS
PNP open-collector
transistor
MEASURE-
MENT
16.5 0.650
15 0.591
SENSORS
STATIC
CONTROL
DEVICES
29.5
1.161
ENDOSCOPE
Notes: 1) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object.
The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an
ambient temperature drift and/or supply voltage fluctuation.
2) “ I ” in the model No. indicates a different frequency type.
LASER
MARKERS
PLC /
TERMINALS
5 m 16.404 ft cable length type, flexible cable type
HUMAN
MACHINE
5 m 16.404 ft cable length type (standard: 1 m 3.281 ft) and flexible cable (excluding 5 m 16.404 ft cable length type) are available.
However, long sensing range type is not available. When ordering 5 m 16.404 ft cable length type, suffix “-C5” to the model No. When
ordering flexible cable type, suffix “-R” to the model No.
INTERFACES
ENERGY
CONSUMPTION
VISUALIZATION
COMPONENTS
(e.g.) 5 m 16.404 ft cable length type of GX-F15AI-P is “GX-F15AI-P-C5”. Flexible cable type of GX-F15AI-P is “GX-F15AI-P-R”.
FA
COMPONENTS
OPTIONS
MACHINE
VISION
SYSTEMS
UV
CURING
Designation
Model No.
Description
SYSTEMS
Mounting bracket for GX-6 type (recommended).
Sensors can be mounted closely together for space-saving.
MS-GX6-1
Selection
Guide
Sensor
mounting
bracket
Mounting brackets for GX-6 type
Sensor mounting brackets for GL-6 can be used. Interchange is
possible.
MS-GL6-1
MS-GL6-2
MS-GXL8-4
MS-GXL15
MS-A15F
Amplifier
Built-in
Amplifier-
separated
Mounting bracket for GX-8 type
Mounting bracket for GX-15 type
GX-F/H
GXL
GL
Mounting example when
mounted onto a steel or
stainless steel plate
For GX-FL15□(-P)
For GX-HL15□(-P)
Aluminum
sheet
MS-A15H
GX-U/GX-FU/
GX-N
Sensor mounting bracket
· MS-GX6-1
Aluminum sheet
GX
· MS-GXL8-4
· MS-GXL15
· MS-A15F
· MS-A15H
Nut is not
attached.
1pc. each of M3
Nut is not
attached.
(length: 12 mm 0.472 in)
truss head screw, nut,
spring washer and plain
washer is attached.
· MS-GL6-1
· MS-GL6-2
Nut is not
attached.
Nut is not
attached.
Rectangular-shaped Inductive Proximity Sensor GX-F/HSERIES
766
SPECIFICATIONS
FIBER
SENSORS
LASER
SENSORS
GX-6 type
PHOTO-
ELECTRIC
SENSORS
Type
Front sensing
Top sensing
NPN output
PNP output
MICRO
GX-F6A(I)
GX-H6A(I)
GX-F6B(I)
GX-H6B(I)
GX-F6A(I)-P
GX-H6A(I)-P
GX-F6B(I)-P
GX-H6B(I)-P
PHOTO-
ELECTRIC
SENSORS
Item
AREA
SENSORS
Max. operation distance (Note 3)
Stable sensing range (Note 3)
Standard sensing object
Hysteresis
1.6 mm 0.063 in ± 8 %
0 to 1.3 mm 0 to 0.051 in
LIGHT
CURTAINS
Iron sheet 12 × 12 × t 1 mm 0.472 × 0.472 × t 0.039 in
PRESSURE /
FLOW
20 % or less of operation distance (with standard sensing object)
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
Repeatability
Along sensing axis, perpendicular to sensing axis: 0.04 mm 0.0016 in or less
+10
–15
Supply voltage
12 to 24 V DC
Ripple P-P 10 % or less
%
PARTICULAR
USE
Current consumption
15 mA or less
SENSORS
SENSOR
OPTIONS
NPN open-collector transistor
PNP open-collector transistor
• Maximum source current: 100 mA
• Maximum sink current: 100 mA
Output
SIMPLE
• Applied voltage: 30 V DC or less (between output and 0 V)
• Residual voltage: 2 V or less (at 100 mA sink current)
• Applied voltage: 30 V DC or less (between output and +V)
• Residual voltage: 2 V or less (at 100 mA source current)
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
Utilization category
Output operation
Max. response frequency
Operation indicator
Pollution degree
DC-12 or DC-13
400 Hz
Normally closed
Normally closed
Normally closed
Normally closed
MEASURE-
MENT
SENSORS
STATIC
CONTROL
DEVICES
Orange LED (lights up when the output is ON)
3 (Industrial environment)
ENDOSCOPE
Protection
IP68 (IEC), IP68g (JEM) (Note 4, 5)
LASER
Ambient temperature
Ambient humidity
EMC
–25 to +70 °C –13 to +158 °F, Storage: – 40 to +85 °C – 40 to +185 °F
35 to 85 % RH, Storage: 35 to 95 % RH
EN 60947-5-2
MARKERS
PLC /
TERMINALS
HUMAN
MACHINE
INTERFACES
Voltage withstandability
Insulation resistance
Vibration resistance
Shock resistance
1,000 V AC for one min. between all supply terminals connected together and enclosure
50 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in amplitude (Max. 20 G) in X, Y and Z directions for two hours each
10,000 m/s2 acceleration (1,000 G approx.) in X, Y and Z directions for three times each
ENERGY
CONSUMPTION
VISUALIZATION
COMPONENTS
FA
COMPONENTS
Sensing
range
variation
Temperature characteristics
Voltage characteristics
Over ambient temperature range –25 to +70 °C –13 to +158 °F: Within ± 8 % of sensing range at +23 °C +73 °F
+10
MACHINE
VISION
SYSTEMS
Within ±2 % for
% fluctuation of the supply voltage
–15
UV
CURING
SYSTEMS
Material
Cable
Enclosure: PBT, Indicator part: Polyester
0.15 mm2 3-core oil, heat and cold resistant cabtyre cable, 1 m 3.281 ft long
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
15 g approx.
Cable extension
Net weight
Selection
Guide
Amplifier
Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 °C +73 °F.
2) “ I ” in the model No. indicates a different frequency type.
Built-in
Amplifier-
3) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object.
The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient
temperature drift and/or supply voltage fluctuation.
separated
GX-F/H
GXL
GL
4) Panasonic Electric Works SUNX’s IP68 test method
1
2
3
4
Immerse at 0 m below 0 °C +32 °F water surface and leave for 30 min. Then, immerse at 0 m below +70 °C +158 °F water surface and leave for 30 min.
1
Regard the heat shock test in
as one cycle and perform 20 cycles.
Leave in water at a depth of 1 m 3.281 ft in water for 500 hours.
GX-U/GX-FU/
GX-N
1
3
to , insulation resistance, voltage withstandability, current consumption, and sensing range must meet the standard values.
After tests
5) If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil.
GX
Rectangular-shaped Inductive Proximity Sensor GX-F/HSERIES
767
FIBER
SPECIFICATIONS
SENSORS
LASER
SENSORS
GX-8 type
PHOTO-
ELECTRIC
SENSORS
Type
Front sensing
Top sensing
NPN output
PNP output
MICRO
PHOTO-
GX-F8A(I)
GX-H8A(I)
GX-F8B(I)
GX-H8B(I)
GX-F8A(I)-P
GX-H8A(I)-P
GX-F8B(I)-P
GX-H8B(I)-P
ELECTRIC
SENSORS
Item
AREA
SENSORS
Max. operation distance (Note 3)
Stable sensing range (Note 3)
Standard sensing object
Hysteresis
2.5 mm 0.098 in ± 8 %
0 to 2.1 mm 0 to 0.083 in
LIGHT
CURTAINS
Iron sheet 15 × 15 × t 1 mm 0.591 × 0.591 × t 0.039 in
PRESSURE /
FLOW
20 % or less of operation distance (with standard sensing object)
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
Repeatability
Along sensing axis, perpendicular to sensing axis: 0.04 mm 0.0016 in or less
+10
–15
Supply voltage
12 to 24 V DC
Ripple P-P 10 % or less
%
PARTICULAR
USE
Current consumption
15 mA or less
SENSORS
SENSOR
OPTIONS
NPN open-collector transistor
PNP open-collector transistor
• Maximum source current: 100 mA
• Maximum sink current: 100 mA
• Applied voltage: 30 V DC or less (between output and 0 V)
• Residual voltage: 2 V or less (at 100 mA sink current)
Output
SIMPLE
WIRE-SAVING
UNITS
• Applied voltage: 30 V DC or less (between output and +V)
• Residual voltage: 2 V or less (at 100 mA source current)
WIRE-SAVING
SYSTEMS
Utilization category
Output operation
Max. response frequency
Operation indicator
Pollution degree
DC-12 or DC-13
MEASURE-
MENT
Normally open
Normally closed
Normally open
Normally closed
SENSORS
500 Hz
STATIC
CONTROL
DEVICES
Orange LED (lights up when the output is ON)
3 (Industrial environment)
ENDOSCOPE
Protection
IP68 (IEC), IP68g (JEM) (Note 4, 5)
LASER
Ambient temperature
Ambient humidity
EMC
–25 to +70 °C –13 to +158 °F, Storage: – 40 to +85 °C – 40 to +185 °F
35 to 85 % RH, Storage: 35 to 95 % RH
EN 60947-5-2
MARKERS
PLC /
TERMINALS
HUMAN
MACHINE
Voltage withstandability
Insulation resistance
Vibration resistance
Shock resistance
1,000 V AC for one min. between all supply terminals connected together and enclosure
50 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in amplitude (Max. 20 G) in X, Y and Z directions for two hours each
10,000 m/s2 acceleration (1,000 G approx.) in X, Y and Z directions for three times each
INTERFACES
ENERGY
CONSUMPTION
VISUALIZATION
COMPONENTS
FA
COMPONENTS
Sensing
range
variation
MACHINE
VISION
Temperature characteristics
Voltage characteristics
Over ambient temperature range –25 to +70 °C –13 to +158 °F: Within ± 8 % of sensing range at +23 °C +73 °F
+10
SYSTEMS
Within ±2 % for
% fluctuation of the supply voltage
–15
UV
CURING
Material
Cable
Enclosure: PBT, Indicator part: Polyester
SYSTEMS
0.15 mm2 3-core oil, heat and cold resistant cabtyre cable, 1 m 3.281 ft long
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Front sensing type: 15 g approx., Top sensing type: 20 g approx..
Cable extension
Net weight
Selection
Guide
Amplifier
Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 °C +73 °F.
2) “ I ” in the model No. indicates a different frequency type.
Built-in
Amplifier-
separated
3) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object.
The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient
temperature drift and/or supply voltage fluctuation.
GX-F/H
GXL
GL
4) Panasonic Electric Works SUNX’s IP68 test method
1
2
3
4
Immerse at 0 m below 0 °C +32 °F water surface and leave for 30 min. Then, immerse at 0 m below +70 °C +158 °F water surface and leave for 30 min.
1
Regard the heat shock test in
as one cycle and perform 20 cycles.
Leave in water at a depth of 1 m 3.281 ft in water for 500 hours.
1
3
to , insulation resistance, voltage withstandability, current consumption, and sensing ranges must meet the standard values.
After tests
GX-U/GX-FU/
GX-N
5) If using the sensor in an environment where cutting oil droplets splatter, the sensor may deteriorate due to added substances in the oil.
GX
Rectangular-shaped Inductive Proximity Sensor GX-F/HSERIES
768
FIBER
SPECIFICATIONS
SENSORS
LASER
SENSORS
GX-12 type
PHOTO-
ELECTRIC
SENSORS
Type
Front sensing
Top sensing
NPN output
PNP output
MICRO
GX-F12A(I)
GX-H12A(I)
GX-F12B(I)
GX-H12B(I)
GX-F12A(I)-P
GX-H12A(I)-P
GX-F12B(I)-P
GX-H12B(I)-P
PHOTO-
ELECTRIC
SENSORS
Item
AREA
SENSORS
Max. operation distance (Note 3)
Stable sensing range (Note 3)
Standard sensing object
Hysteresis
4.0 mm 0.157 in ± 8 %
0 to 3.3 mm 0 to 0.130 in
LIGHT
CURTAINS
Iron sheet 20 × 20 × t 1 mm 0.787 × 0.787 × t 0.039 in
PRESSURE /
FLOW
20 % or less of operation distance (with standard sensing object)
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
Repeatability
Along sensing axis, perpendicular to sensing axis: 0.04 mm 0.0016 in or less
+10
–15
Supply voltage
12 to 24 V DC
% Ripple P-P 10 % or less
PARTICULAR
USE
Current consumption
15 mA or less
SENSORS
SENSOR
OPTIONS
NPN open-collector transistor
PNP open-collector transistor
• Maximum source current: 100 mA
• Maximum sink current: 100 mA
Output
SIMPLE
• Applied voltage: 30 V DC or less (between output and 0 V)
• Residual voltage: 2 V or less (at 100 mA sink current)
• Applied voltage: 30 V DC or less (between output and +V)
• Residual voltage: 2 V or less (at 100 mA source current)
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
Utilization category
Output operation
Max. response frequency
Operation indicator
Pollution degree
DC-12 or DC-13
Normally open
Normally closed
Normally open
Normally closed
MEASURE-
MENT
SENSORS
500 Hz
STATIC
CONTROL
DEVICES
Orange LED (lights up when the output is ON)
3 (Industrial environment)
ENDOSCOPE
Protection
IP68 (IEC), IP68g (JEM) (Note 4, 5)
LASER
Ambient temperature
Ambient humidity
EMC
–25 to +70 °C –13 to +158 °F, Storage: – 40 to +85 °C – 40 to +185 °F
35 to 85 % RH, Storage: 35 to 95 % RH
EN 60947-5-2
MARKERS
PLC /
TERMINALS
HUMAN
MACHINE
INTERFACES
Voltage withstandability
Insulation resistance
Vibration resistance
Shock resistance
1,000 V AC for one min. between all supply terminals connected together and enclosure
50 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in amplitude (Max. 20 G) in X, Y and Z directions for two hours each
10,000 m/s2 acceleration (1,000 G approx.) in X, Y and Z directions for three times each
ENERGY
CONSUMPTION
VISUALIZATION
COMPONENTS
FA
COMPONENTS
Sensing
range
variation
Temperature characteristics
Voltage characteristics
Over ambient temperature range –25 to +70 °C –13 to +158 °F: Within ±8 % of sensing range at +23 °C +73 °F
+10
MACHINE
VISION
SYSTEMS
Within ±2 % for
% fluctuation of the supply voltage
–15
UV
CURING
SYSTEMS
Material
Cable
Enclosure: PBT, Indicator part: Polyester
0.15 mm2 3-core oil, heat and cold resistant cabtyre cable, 1 m 3.281 ft long
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Front sensing type: 20 g approx., Top sensing type: 20 g approx..
Cable extension
Net weight
Selection
Guide
Amplifier
Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 °C +73 °F.
2) “ I ” in the model No. indicates a different frequency type.
Built-in
Amplifier-
3) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object.
The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient
temperature drift and/or supply voltage fluctuation.
separated
GX-F/H
GXL
GL
4) Panasonic Electric Works SUNX’s IP68 test method
1
2
3
4
Immerse at 0 m below 0 °C +32 °F water surface and leave for 30 min. Then, immerse at 0 m below +70 °C +158 °F water surface and leave for 30 min.
1
Regard the heat shock test in
as one cycle and perform 20 cycles.
Leave in water at a depth of 1 m 3.281 ft in water for 500 hours.
1
3
to , insulation resistance, voltage withstandability, current consumption, and sensing ranges must meet the standard values.
After tests
GX-U/GX-FU/
GX-N
5) If using the sensor in an environment where cutting oil droplets splatter, the sensor may deteriorate due to added substances in the oil.
GX
Rectangular-shaped Inductive Proximity Sensor GX-F/HSERIES
769
FIBER
SPECIFICATIONS
SENSORS
LASER
SENSORS
GX-15 type
PHOTO-
ELECTRIC
SENSORS
NPN output
Long sensing range
Front sensing GX-F15A(I) GX-F15B(I) GX-FL15A(I) GX-FL15B(I) GX-F15A(I)-P GX-F15B(I)-P GX-FL15A(I)-P GX-FL15B(I)-P
GX-H15A(I) GX-H15B(I) GX-HL15A(I) GX-HL15B(I) GX-H15A(I)-P GX-H15B(I)-P GX-HL15A(I)-P GX-HL15B(I)-P
PNP output
Type
MICRO
PHOTO-
Long sensing range
ELECTRIC
SENSORS
AREA
SENSORS
Item
Top sensing
Max. operation distance (Note 3)
Stable sensing range (Note 3)
5.0 mm 0.197 in ± 8 %
8.0 mm 0.315 in ± 8 % (Note 4)
0 to 6.7 mm 0 to 0.264 in (Note 4)
5.0 mm 0.197 in ± 8 %
8.0 mm 0.315 in ± 8 % (Note 4)
0 to 6.7 mm 0 to 0.264 in (Note 4)
LIGHT
CURTAINS
0 to 4.2 mm 0 to 0.165 in
0 to 4.2 mm 0 to 0.165 in
PRESSURE /
FLOW
SENSORS
Iron sheet 20 × 20 × t 1 mm
0.7874 × 0.7874 × t 0.039 in
Iron sheet 30 × 30 × t 1 mm
1.181 × 1.181 × t 0.039 in
Iron sheet 20 × 20 × t 1 mm
0.7874 × 0.7874 × t 0.039 in
Iron sheet 30 × 30 × t 1 mm
1.181 × 1.181 × t 0.039 in
Standard sensing object
INDUCTIVE
PROXIMITY
SENSORS
Hysteresis
20 % or less of operation distance (with standard sensing object)
PARTICULAR
USE
Repeatability
Along sensing axis, perpendicular to sensing axis: 0.04 mm 0.0016 in or less
SENSORS
+10
Supply voltage
Current consumption
12 to 24 V DC
Ripple P-P 10 % or less
%
SENSOR
OPTIONS
–15
15 mA or less
SIMPLE
WIRE-SAVING
UNITS
NPN open-collector transistor
PNP open-collector transistor
• Maximum sink current: 100 mA
• Applied voltage: 30 V DC or less (between output and 0 V)
• Residual voltage: 2 V or less (at 100 mA sink current)
• Maximum source current: 100 mA
• Applied voltage: 30 V DC or less (between output and +V)
• Residual voltage: 2 V or less (at 100 mA source current)
WIRE-SAVING
SYSTEMS
Output
MEASURE-
MENT
SENSORS
Utilization category
Output operation
Max. response frequency
Operation indicator
Pollution degree
DC-12 or DC-13
Normally open Normally closed Normally open Normally closed Normally open Normally closed Normally open Normally closed
250 Hz 150 Hz (Note 5) 250 Hz 150 Hz (Note 5)
STATIC
CONTROL
DEVICES
ENDOSCOPE
Orange LED (lights up when the output is ON)
3 (Industrial environment)
LASER
MARKERS
Protection
IP68 (IEC), IP68g (JEM) (Note 6, 7)
PLC /
TERMINALS
Ambient temperature
Ambient humidity
EMC
–25 to +70 °C –13 to +158 °F, Storage: – 40 to +85 °C – 40 to +185 °F
35 to 85 % RH, Storage: 35 to 95 % RH
EN 60947-5-2
HUMAN
MACHINE
INTERFACES
ENERGY
CONSUMPTION
VISUALIZATION
COMPONENTS
Voltage withstandability
Insulation resistance
Vibration resistance
Shock resistance
1,000 V AC for one min. between all supply terminals connected together and enclosure
FA
50 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in amplitude (Max. 20 G) in X, Y and Z directions for two hours each
10,000 m/s2 acceleration (1,000 G approx.) in X, Y and Z directions for three times each
COMPONENTS
MACHINE
VISION
SYSTEMS
UV
CURING
Sensing
range
variation
Temperature characteristics
Voltage characteristics
Over ambient temperature range –25 to +70 °C –13 to +158 °F: Within ± 8 % of sensing range at +23 °C +73 °F
+10
SYSTEMS
Within ±2 % for
% fluctuation of the supply voltage
–15
Material
Cable
Enclosure: PBT, Indicator part: Polyester
0.15 mm2 3-core oil, heat and cold resistant cabtyre cable, 1 m 3.281 ft long
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
20 g approx.
Selection
Guide
Amplifier
Built-in
Cable extension
Net weight
Amplifier-
separated
Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 °C +73 °F.
2) “ I ” in the model No. indicates a different frequency type.
GX-F/H
GXL
GL
3) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object.
The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient
temperature drift and/or supply voltage fluctuation.
4) This is the numerical value which the sensor mount onto an insulant plate. When mounted onto a steel or stainless steel plate, insert the optional
aluminum sheet between the sensor and the plate.
GX-U/GX-FU/
GX-N
5) This is the numerical value which the sensor mount onto an insulant plate. When mounted onto a metallic plate, max. response frequency will decrease.
6) Panasonic Electric Works SUNX’s IP68 test method
GX
1
2
3
4
Immerse at 0 m below 0 °C +32 °F water surface and leave for 30 min. Then, immerse at 0 m below +70 °C +158 °F water surface and leave for 30 min.
1
Regard the heat shock test in
as one cycle and perform 20 cycles.
Leave in water at a depth of 1 m 3.281 ft in water for 500 hours.
1
3
, insulation resistance, voltage withstandability, current consumption, and sensing range must meet the standard values.
After tests
to
7) If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil.
Rectangular-shaped Inductive Proximity Sensor GX-F/HSERIES
770
FIBER
I/O CIRCUIT DIAGRAMS
SENSORS
LASER
SENSORS
NPN output type
PHOTO-
I /O circuit diagram
ELECTRIC
SENSORS
Wiring diagram
MICRO
PHOTO-
ELECTRIC
SENSORS
Color code
Brown
Load
D1
D2
(Brown) +V
AREA
SENSORS
+
–
12 to 24V DC
Load
Black
(Black) Output
(Note)
+10
%
+
–
12 to 24V DC
LIGHT
–15
+10
%
Tr
CURTAINS
–15
100 mA max.
(Blue) 0 V
Blue
ZD
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
Internal circuit
Users’ circuit
PARTICULAR
USE
Symbols … D1: Reverse supply polarity protection diode
D2: Reverse output polarity protection diode
ZD: Surge absorption zener diode
SENSORS
SENSOR
OPTIONS
Note: The output does not incorporate a short-circuit protection circuit.
Do not connect it directly to a power supply or a capacitive load.
Tr : NPN output transistor
SIMPLE
WIRE-SAVING
UNITS
PNP output type
WIRE-SAVING
SYSTEMS
I/O circuit diagram
MEASURE-
MENT
Wiring diagram
SENSORS
Color code
(Brown) +V
STATIC
Brown
CONTROL
DEVICES
ZD
+
–
12 to 24V DC
100 mA max.
Tr
Black
ENDOSCOPE
+
–
12 to 24V DC
+10
%
+10
%
–15
–15
(Black) Output
D2
D1
Load
LASER
(Note)
Blue
Load
MARKERS
(Blue) 0 V
PLC /
TERMINALS
Internal circuit
Users’ circuit
HUMAN
MACHINE
INTERFACES
Symbols … D1: Reverse supply polarity protection diode
D2: Reverse output polarity protection diode
ZD: Surge absorption zener diode
ENERGY
CONSUMPTION
VISUALIZATION
COMPONENTS
Note: The output does not incorporate a short-circuit protection circuit.
Do not connect it directly to a power supply or a capacitive load.
Tr : PNP output transistor
FA
COMPONENTS
MACHINE
VISION
SYSTEMS
UV
CURING
SYSTEMS
Selection
Guide
Amplifier
Built-in
Amplifier-
separated
GX-F/H
GXL
GL
GX-U/GX-FU/
GX-N
GX
Rectangular-shaped Inductive Proximity Sensor GX-F/HSERIES
771
FIBER
SENSING CHARACTERISTICS (TYPICAL)
SENSORS
LASER
SENSORS
GX-6 type
PHOTO-
ELECTRIC
SENSORS
Sensing field
Correlation between sensing object size and sensing range
MICRO
PHOTO-
4
4
Standard sensing object Standard sensing object
As the sensing object size becomes smaller than
Sensing object Sensing object
0.157
0.157
Iron sheet 12 × 12 × t 1 mm Iron sheet 12 × 12 × t 1 mm
ELECTRIC
SENSORS
a
a mm a a in
×
a
a mm a a in
× ×
×
the standard size (iron sheet 12 × 12 × t 1 mm
0.472 × 0.472 × t 0.039 in), the sensing range
shortens as shown in the left figure.
0.472 × 0.472 × t 0.039 in
0.472 × 0.472 × t 0.039 in
ℓ
ℓ
t 1mm
L
L
3
L
3
AREA
L
t 1mm
t 0.039 in
0.118
SENSORS
0.118
t 0.039 in
Top sensing
Front sensing
Top sensing
Front sensing
LIGHT
Stainless steel
2
2
CURTAINS
(
)
SUS304
0.079
0.079
Iron
PRESSURE /
FLOW
1
1
SENSORS
0.039
0.039
INDUCTIVE
PROXIMITY
SENSORS
Aluminum
Brass
10
0
4
2
0.079
Left
0
2
0.079
Right
4
0
5
15
0.591
20
PARTICULAR
USE
0.157
0.157
0.197
0.394
0.787
Center
Operating point ℓ (mm in)
SENSORS
Sensing object side
length a (mm in)
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
GX-8 type
Sensing field
Correlation between sensing object size and sensing range
WIRE-SAVING
SYSTEMS
4
4
Sensing object
Sensing object
Standard sensing object Standard sensing object
As the sensing object size becomes smaller than
the standard size (iron sheet 15 × 15 × t 1 mm
0.591 × 0.591 × t 0.039 in), the sensing range
shortens as shown in the left figure.
0.157
0.157
a
a mm a a in
× ×
a
a mm a a in
×
Iron sheet 15 × 15 × t 1 mm Iron sheet 15 × 15 × t 1 mm
×
MEASURE-
MENT
SENSORS
0.591 × 0.591 ×ℓt 0.039 in
L
t 0.039 in
0.591 × 0.591 × t 0.039 in
t 1 mm
t 1 mm
L
L
ℓ
t 0.039 in
L
3
3
Top sensing
0.118
0.118
STATIC
CONTROL
DEVICES
Front sensing
Top sensing
Front sensing
Iron
2
2
0.079
Stainless steel
0.079
ENDOSCOPE
(
)
SUS304
Brass
1
1
Aluminum
LASER
0.039
0.039
MARKERS
PLC /
0
0
TERMINALS
5
10
15
20
0.787
4
2
0.079
Left
0
2
4
0.197
0.394
0.591
0.157
0.079
0.157
Center
Operating point ℓ (mm in)
Right
Sensing object side
length a (mm in)
HUMAN
MACHINE
INTERFACES
ENERGY
CONSUMPTION
VISUALIZATION
COMPONENTS
GX-12 type
FA
Sensing field
Correlation between sensing object size and sensing range
COMPONENTS
8
8
Sensing
MACHINE
VISION
Standard sensing object Standard sensing object
Sensing object a a mm a a in
As the sensing object size becomes smaller than
the standard size (iron sheet 20 × 20 × t 1 mm
0.787 × 0.787 × t 0.039 in), the sensing range
shortens as shown in the left figure.
×
×
0.315
0.315
object
Iron sheet 20 × 20 × t 1 mm Iron sheet 20 × 20 × t 1 mm
a
a
a mm
SYSTEMS
×
×
t 1 mm
0.787 × 0.787 × t 0.039 in
0.787 × 0.787 × t 0.039 in
L
a in
t 0.039 in
ℓ
ℓ
Front sensing
UV
CURING
6
6
L
L
L
t 1 mm
t 0.039 in
0.236
0.236
SYSTEMS
Top sensing
Top sensing
Front sensing
Iron
4
4
Stainless steel
0.157
0.157
(
)
SUS304
Brass
Selection
Guide
2
2
Aluminum
0.079
0.079
Amplifier
Built-in
0
Amplifier-
0
10
20
30
40
1.575
separated
10
5
0
5
10
0.394
0.394
0.787
1.181
0.394
0.197
0.197
Left
Center
Right
Sensing object side
length a (mm in)
Operating point ℓ (mm in)
GX-F/H
GXL
GL
GX-15 type
GX-U/GX-FU/
GX-N
Sensing field
Correlation between sensing object size and sensing range
8
8
GX
Standard sensing object Standard sensing object
Sensing object
a
a mm a a in
×
×
0.315
0.315
Sensing object
Iron sheet 20 × 20 × t 1 mm
0.787 × 0.787 × t 0.039 in
Iron sheet 20 × 20 × t 1 mm
a
a mm a
a in L
×
×
As the sensing object size becomes smaller than
the standard size (iron sheet 20 × 20 × t 1 mm
0.787 × 0.787 × t 0.039 in), the sensing range
shortens as shown in the left figure.
0.787 × 0.
78ℓ7 × t 0.039 in
t 1mm t 0.039 in
Top sensing
ℓ
L
t 1mm
Front
6
L
6
L
t 0.039 in
sensing
Top sensing
0.236
0.236
Front
Iron
sensing
4
4
Stainless steel
0.157
0.157
(
)
SUS304
Brass
Aluminum
2
2
0.079
0.079
0
10
5
0
5
0
10
20
30
40
1.575
10
0.394
0.197
0.197
0.394
0.787
1.181
0.394
Left
Center
Right
Sensing object side
Operating point ℓ (mm in)
length a (mm in)
Rectangular-shaped Inductive Proximity Sensor GX-F/HSERIES
772
SENSING CHARACTERISTICS (TYPICAL)
FIBER
SENSORS
LASER
SENSORS
GX-15 (Long sensing range) type
PHOTO-
ELECTRIC
SENSORS
Sensing field
Correlation between sensing object size and sensing range
MICRO
Standard sensing object Standard sensing object
PHOTO-
ELECTRIC
SENSORS
Sensing object
Sensing object
As the sensing object size becomes smaller than
the standard size (iron sheet 30 × 30 × t 1 mm
1.181 × 1.181 × t 0.039 in), the sensing range
shortens as shown in the left figure.
Iron sheet 30 × 30 × t 1 mm Iron sheet 30 × 30 × t 1 mm
a
a mm a a in
×
a
a mm a a in
× ×
×
1.181 × 1.181 × t 0.039 in
1.181 × 1.181 × t 0.039 in
10
ℓ
10
L
ℓ
L
t 1mm
t 1mm t 0.039 in
Top sensing
L
0.394
0.394
AREA
t 0.039 in
Front sensing
L
Top
SENSORS
Front
Iron
sensing
sensing
Stainless steel
(
)
LIGHT
SUS304
CURTAINS
5
5
0.197
0.197
PRESSURE /
FLOW
Brass
Aluminum
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
0
0
10
20
0.787
30
40
1.575
0
10
5
5
0.197
Right
10
0.394
PARTICULAR
USE
0.394
1.181
0.394
0.197
Left
Center
Operating point ℓ (mm in)
Sensing object side
length a (mm in)
SENSORS
SENSOR
OPTIONS
PRECAUTIONS FOR PROPER USE
Refer to General precautions.
SIMPLE
WIRE-SAVING
UNITS
GX-8 type
WIRE-SAVING
SYSTEMS
• Never use this product as a sensing device
for personnel protection.
M3 (length 12 mm 0.472 in) truss head
• Make sure to use a M3
(length: 12 mm 0.472 in or
more) truss head screw.
The tightening torque
should be 0.7 N·m or less.
Do not use a flat head
screw or a pan head
screw.
MEASURE-
MENT
screw (Accessory for MS-GXL8-4)
• In case of using sensing devices for
personnel protection, use products which
meet laws and standards, such as OSHA,
ANSI or IEC etc., for personnel protection
applicable in each region or country.
SENSORS
MS-GXL8-4 (Accessory)
STATIC
CONTROL
DEVICES
M3 × 0.5 mm 0.020 in tapped hole
(Depth: 8 mm 0.315 in or more)
or ø3.4 mm ø0.134 in thru-hole
ENDOSCOPE
11.5 mm 0.453 in
If mounting using nut
and washers
(Accessories for MS-GXL8-4)
LASER
MARKERS
Mounting
ø2.4 mm ø0.098 in hole
(Depth: 3 mm 0.315 in or more)
PLC /
GX-6 type
TERMINALS
GX-12 type
• Use the optional sensor mounting bracket when
installing.
HUMAN
MACHINE
M3 (length 12 mm 0.472 in or more)
pan head screw
• The tightening torque
should be 0.7 N·m or less.
INTERFACES
(Purchase separately.)
ENERGY
CONSUMPTION
VISUALIZATION
COMPONENTS
<When using MS-GX6-1 (recommended)>
• To mount the sensor with
a nut, the mounting hole
diameter should be ø3.4
mm ø0.134 in. Further, the
hole in which the boss is
inserted should be ø2.5
mm ø0.098 in and 3 mm
0.118 in, or more, deep.
M3 × 0.5 mm 0.020 in tapped hole
(Depth: 10 mm 0.394 in or more)
or ø3.4 mm ø0.134 in thru-hole
• To mount the sensor with
a nut, the mounting hole
diameter should be
FA
COMPONENTS
MACHINE
VISION
M3 pan head screw
(
16 mm 0.630 in
ø3.4 mm ø0.134 in.
Purchase separately.)
SYSTEMS
If mounting using nut
and washers
1
Insert the sensor into the
bracket as shown on the
right.
UV
CURING
SYSTEMS
MS-GX6-1
Hook
(Purchase separately.)
Cable
M3 x 0.5 mm 0.020 in
tapped hole or
ø2.5 mm ø0.098 in hole
(Depth: 3 mm 0.118 in or more)
Groove
ø3.4 mm ø0.134 in hole
2
Push the sensor until the
bracket hook is lodged in
the groove on the upper
portion of the sensor.
Fix the bracket in place
with M3 pan head screw.
22 mm 0.866 in
GX-15 type
Selection
Guide
ø3.4 mm
Amplifier
Built-in
M3 pan head screws or
truss head screws
If mounting using nut
and washers
• The tightening torque
should be 1 N·m or less.
• To mount the sensor with
a nut, the mounting hole
diameter should be ø3.4
mm ø0.134 in.
ø
0.134 in hole
3
Amplifier-
(
Purchase separately.)
Do not use flat head
screws.
separated
M3 x 0.5 mm 0.020 in
tapped holes or
ø3.4 mm ø0.134 in holes
GX-F/H
GXL
GL
<When using MS-GL6-1 / MS-GL6-2>
• To mount the sensor with a nut, the mounting hole
diameter should be ø3.4 mm ø0.134 in.
9 mm
0.354 in
GX-U/GX-FU/
GX-N
M3 pan head screw
(Purchase separately.)
M3 pan head screws
(Purchase separately.)
If mounting using nuts
and washers
GX
(Purchase separately.)
MS-GXL15
(Sensor mounting bracket)
MS-GL6-2
MS-GL6-1
ø2.4 mm
Aluminum sheet (Optional)
• MS-A15F
• MS-A15H
M3 x 0.5 mm 0.020 in
tapped hole or
• When installing the long
sensing range type on iron
or stainless steel plate, put
the optional aluminum sheet
in between the sensor and
the plate.
M3 x 0.5 mm 0.020 in
tapped holes or
0.098 in hole
ø3.4 mm ø0.134 in hole
ø3.4 mm ø0.134 in holes
10 mm
13.6 mm
0.535 in
0.394 in
If mounting using nut
and washers
(Purchase separately.)
If mounting using nuts
and washers
(Purchase separately.)
Rectangular-shaped Inductive Proximity Sensor GX-F/HSERIES
773
Refer to General precautions.
FIBER
PRECAUTIONS FOR PROPER USE
SENSORS
LASER
Influence of surrounding metal
SENSORS
Sensing range
PHOTO-
ELECTRIC
SENSORS
• The sensing range is specified for the standard sensing
object. With a non-ferrous metal, the sensing range is
obtained by multiplying with the correction coefficient
specified below. Further, the sensing range also changes
if the sensing object is smaller than the standard sensing
object or if the sensing object is plated.
• When there is a metal near the sensor, keep the minimum
separation distance specified below.
MICRO
PHOTO-
Front sensing type
ELECTRIC
SENSORS
Metal
Metal
AREA
SENSORS
B
Metal
C
C
LIGHT
A
Correction coefficient
CURTAINS
Model
No.
GX-F6 GX-F8 GX-F12 GX-F15
GX-H6 GX-H8 GX-H12 GX-H15
GX-FL15 GX-HL15
PRESSURE /
FLOW
type
type
SENSORS
type
type
type
type
Metal
Iron
GX-F6 type GX-F8 type GX-F12 type GX-F15 type GX-FL15 type
INDUCTIVE
PROXIMITY
SENSORS
1
1
1
1
1
1
6 mm 0.236 in
(Note 1)
8 mm 0.315 in
(Note 2)
A
7.4 mm 0.291 in 7.1 mm 0.280 in
8 mm 0.315 in
Stainless steel
(SUS304)
0.76 approx. 0.76 approx. 0.79 approx. 0.68 approx. 0.70 approx. 0.76 approx.
PARTICULAR
USE
B
C
8 mm 0.315 in
3 mm 0.118 in
8 mm 0.315 in 20 mm 0.787 in 20 mm 0.787 in 30 mm 1.181 in
3 mm 0.118 in 7 mm 0.276 in 7 mm 0.276 in 10 mm 0.394 in
Brass
0.50 approx. 0.50 approx. 0.56 approx. 0.47 approx. 0.45 approx. 0.50 approx.
0.48 approx. 0.48 approx. 0.53 approx. 0.45 approx. 0.43 approx. 0.48 approx.
SENSORS
Aluminum
SENSOR
OPTIONS
Notes: 1) When using MS-GX6-1 (recommended mounting bracket), the
distance “A” including the thickness of mounting bracket will be
6.4 mm 0.252 in.
SIMPLE
WIRE-SAVING
UNITS
Wiring
2) The GXL-FL15 type should be mounted on an insulator. To mount
it on an iron or stainless steel, use the enclosed aluminum sheet.
• The output does not incorporate a short-circuit protection
circuit. Do not connect it directly to a power supply or a
capacitive load.
WIRE-SAVING
SYSTEMS
Top sensing type
MEASURE-
MENT
Metal
D
Metal
SENSORS
STATIC
CONTROL
DEVICES
Others
G
Metal
• Do not use during the initial transient time (50 ms) after
the power supply is switched on.
G
ENDOSCOPE
E
F
LASER
GX-H6 type GX-H8 type GX-H12 type GX-H15 type GX-HL15 type
MARKERS
D
E
3 mm 0.118 in
4 mm 0.157 in
7 mm 0.276 in
6 mm 0.236 in 12 mm 0.472 in
PLC /
TERMINALS
10 mm 0.394 in 10 mm 0.394 in 20 mm 0.787 in 20 mm 0.787 in 30 mm 1.181 in
10 mm 0.394 in
(Note)
3 mm 0.118 in 10 mm 0.394 in
HUMAN
MACHINE
F
2 mm 0.079 in
2 mm 0.079 in
3 mm 0.118 in
3 mm 0.118 in
3 mm 0.118 in
3 mm 0.118 in
0 mm
0 in
INTERFACES
G
ENERGY
CONSUMPTION
VISUALIZATION
COMPONENTS
Note: When GX-HL15 type is mounted on an insulator or seated on the
enclosed aluminum sheet, the distance “F” can be zero.
FA
COMPONENTS
Mutual interference prevention
MACHINE
VISION
• When two or more sensors are installed in parallel or face
to face, keep the minimum separation distance specified
below to avoid mutual interference.
SYSTEMS
UV
CURING
SYSTEMS
Front sensing
H
J
Between “I” type
and non “I” type
0 mm 15 mm
(Note 2) 0.591 in
GX-F6
GX-H6
type
Between two “I” types 13 mm 25 mm
or two non “I” types
Selection
Guide
0.512 in 0.984 in
Between “I” type
and non “I” type
0 mm 15 mm
(Note 2) 0.591 in
Amplifier
GX-F8
GX-H8
type
H
H
Built-in
Amplifier-
Between two “I” types 20 mm 35 mm
or two non “I” types
J
separated
0.787 in 1.378 in
Between “I” type
and non “I” type
0 mm 25 mm
(Note 2) 0.984 in
GX-F12
GX-H12
type
GX-F/H
GXL
GL
Between two “I” types 25 mm 50 mm
or two non “I” types
0.984 in 1.969 in
Top sensing
Between “I” type
and non “I” type
0 mm 25 mm
(Note 2) 0.984 in
GX-F15
GX-H15
type
Between two “I” types 45 mm 70 mm
or two non “I” types
GX-U/GX-FU/
GX-N
1.772 in 2.756 in
Between “I” type
and non “I” type
0 mm 25 mm
(Note 2) 0.984 in
J
H
GX-FL15
GX-HL15
type
GX
Between two “I” types 110 mm 170 mm
or two non “I” types
3.059 in 6.693 in
Notes: 1) “I” in the model No. specifies
the different frequency type.
2) Close mounting is possible for up to two sensors.
When mounting three sensors or more at an equal spacing, align
the model with “I” and the model without “I” alternately. The minimum
value of dimension “H” should be as given below.
GX-F6 / H6 type: 3.5mm 0.138 in
GX-F8 / H8 type: 6mm 0.236 in
GX-F12 / H12 type: 6.5mm 0.256 in
GX-F15 / H15 type: 15mm 0.591 in
GX-FL15 / HL15 type: 47.5mm 1.870 in
Rectangular-shaped Inductive Proximity Sensor GX-F/HSERIES
774
DIMENSIONS (Unit: mm in)
FIBER
The CAD data in the dimensions can be downloaded from our website.
SENSORS
LASER
SENSORS
Sensor
Sensor
GX-F6□
GX-H6□
PHOTO-
ELECTRIC
SENSORS
3
MICRO
0.118
PHOTO-
ELECTRIC
SENSORS
ø3 ø0.118 cable,
1 m 3.281 ft long
Operation indicator
(Orange)
6
0.236
11
6
0.433 0.236
24.5
AREA
0.5
SENSORS
0.020
0.965
11.5
6
0.453 0.236
25
ø3 ø0.118 cable,
1 m 3.281 ft long
Sensing direction
2.6
LIGHT
0.5
0.5
0.984
CURTAINS
0.020
6
0.020
3
0.5
0.236
0.102
6
0.118
2.5
0.020
PRESSURE /
FLOW
0.098
6
0.236
0.236
SENSORS
Operation indicator (Orange)
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE
Sensor
Sensor
GX-F8□
GX-H8□
SENSORS
SENSOR
OPTIONS
ø3.1 ø0.122 mounting hole
5.4 0.213 6.3 0.248
Operation indicator (Orange)
Operation indicator
(Orange)
Sensing
direction
SIMPLE
7.4
WIRE-SAVING
UNITS
0.291
2.95
8
0.116
0.315
ø3 ø0.118 cable,
1 m 3.281 ft long
18.5
0.728
6.8
WIRE-SAVING
SYSTEMS
Sensing
direction
8.55
0.337
0.268
2 0.079
3.7
7.7
11.5
23
MEASURE-
MENT
R4.25
3.85
22.5
ø9 ø0.354
0.146
0.303
0.453
0.906
0.886
R0.167 0.152
9.1 0.358
2.5
2.4
SENSORS
ø3.1 ø0.12
0.095
9.75
6.5
mounting hole
0.384
8.2 0.323
STATIC
0.256
4.8 0.189 5.3 0.209
CONTROL
DEVICES
ø3 ø0.118 cable,
1 m 3.281 ft long
2.65
8.6
4.6
8
5.4
1
0.098
5
25
0.104
1
0.339
0.181
0.315
0.213
0.039
0.197
0.984
ENDOSCOPE
0.039
6.3
5.3
0.248
0.209
LASER
MARKERS
PLC /
Sensor
Sensor
GX-F12□
GX-H12□
TERMINALS
Operation indicator
(Orange)
ø3 ø0.118 cable,
HUMAN
1 m 3.281 ft long
MACHINE
INTERFACES
ENERGY
CONSUMPTION
VISUALIZATION
COMPONENTS
Sensing
direction
6.8 0.268 7.8 0.307
7.1
0.280
Operation indicator
(Orange)
ø3.1 ø0.122 mounting hole
ø6 ø0.236 screw seat,
1.4 0.055 deep
FA
22.2
3.3 0.130
1.5 0.059
12
COMPONENTS
0.874
0.472
8.65 0.341
12
MACHINE
VISION
4.8 0.189
0.472
3 0.118
5.5
Sensing
direction
12
SYSTEMS
ø2.3
R6.25 R0.246
0.217
0.472
ø0.091
UV
27
27.8
11.05
CURING
SYSTEMS
16
16
12
0.472
13
1.063
1.095
0.630
12.5
ø12.5 ø0.492
0.435
0.630
0.512
0.492
6.2
6.5 0.256
0.244
ø3.1 ø0.12
mounting hole
12.4
5 0.197
16
3.1 5.8
0.488
ø2.3
ø0.091
2.5
1.5
0.630
ø6 ø0.236 screw seat,
0.12 0.228
4.4 0.173
0.098
0.059
0.8 0.032 deep
27.4
4.4
Selection
Guide
1.079
0.173
ø3 ø0.118 cable,
2.8
6.8
1 m 3.281 ft long
Amplifier
Built-in
0.110
5.2
0.268
7.8
0.205
Amplifier-
0.307
5.6
separated
0.221
GX-F/H
GXL
GL
Sensor
Sensor
GX-F(L)15
GX-H(L)15□
□
Operation indicator (Orange)
2-ø3.1 ø0.122 holes
ø3 ø0.118 cable, 1 m 3.281 ft long
31.5
ø3 ø0.118 cable,
1 m 3.281 ft long
GX-U/GX-FU/
GX-N
1.240
7.5
20.5
0.295
0.807
GX
9
Sensing direction
0.354
9
15
0.591
0.354
26
1.024
2-ø3.1 ø0.122 holes
21.5
Sensing
direction
0.846
ø15.5 ø0.610
ø15.5
11.95
0.470
ø0.610
3
0.118
14.15
0.557
7.8
5.3
5.3
0.307
0.209
0.209
14.15
0.557
16.5
15.65
0.616
0.650
8
8.5
0.335
0.315
2.3
15
0.591
2.8
Operation indicator (Orange)
3.7
0.146
5.7
0.091
2.8
7.2
29.5
1.161
0.110
0.224
0.110 0.283
Rectangular-shaped Inductive Proximity Sensor GX-F/HSERIES
775
FIBER
DIMENSIONS (Unit: mm in)
The CAD data in the dimensions can be downloaded from our website.
SENSORS
LASER
SENSORS
Sensor mounting bracket for GX-6 type (Optional)
Sensor mounting bracket for GX-6 type (Optional)
MS-GX6-1
MS-GL6-1
PHOTO-
ELECTRIC
SENSORS
25.75
ø3.1
Mounting hole dimensions
1.014
25.35
0.998
ø0.122
MICRO
PHOTO-
Mounting hole dimensions
6
0.236
ELECTRIC
SENSORS
13.6
ø2.4 ø0.094 hole,
22
0.535
6
6.8
2-3.2 × 3.8 0.126 × 0.150 oblong holes
3 0.118 or more deep
0.866
0.236
0.268
AREA
SENSORS
3.55
22.2
5.5
2.3
(
)
0.217
0.140
0.874
0.091
2-M3 × 0.5 0.020 tapped holes
M3 × 0.5 0.020 tapped hole,
8 0.315 or more deep
5.6
(or 2-ø3.4 ø0.134 holes)
LIGHT
6.4
t 0.4
0.220
CURTAINS
0.252
19.6 0.772 t 0.016
(Note)
Note: 20 mm 0.787 in with the sensor fitted.
t 0.4
PRESSURE /
FLOW
t 0.016
2
0.079
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE
Sensor mounting bracket for GX-6 type (Optional)
Sensor mounting bracket for GX-8 type (Optional)
MS-GL6-2
MS-GXL8-4
SENSORS
SENSOR
OPTIONS
Mounting hole dimensions
Mounting hole dimensions
6
SIMPLE
WIRE-SAVING
UNITS
0.236
Center of
9
10
ø2.4 ø0.094 hole,
sensing
0.354
0.394
3 0.118 or more deep
2
2
6
3.2 × 3.8 0.126 × 0.150 oblong hole
2.3
0.079
0.079
0.236
0.091
WIRE-SAVING
SYSTEMS
5.3
0.209
5.6
5.5
0.217
ø2.4
ø0.094
hole
0.3
0.012
(11.5)
(0.453)
M3 × 0.5 0.020 tapped hole
(or ø3.4 ø0.134 hole)
t 0.4
t 0.016
M3 × 0.5 0.020
tapped hole,
8 0.315 or more deep
11.5
MEASURE-
MENT
2.2
0.087
0.220
t 0.4
t 0.016
1.5
0.453
13.2 0.520
0.059
3.3
0.130
SENSORS
(16.2)
15.8
(Note)
(0.638)
0.622
Note: 13.4 mm 0.528 in with the sensor fitted.
STATIC
CONTROL
DEVICES
4.5 0.177
ø3.1 ø0.122 hole
ENDOSCOPE
LASER
Material: Stainless steel (SUS304)
MARKERS
1 pc. each of M3 (length 12 mm 0.472 in) truss head screw,
nut, spring washer and plain washer is attached.
PLC /
TERMINALS
HUMAN
MACHINE
INTERFACES
ENERGY
CONSUMPTION
VISUALIZATION
COMPONENTS
Sensor mounting bracket for GX-15 type (Optional)
Aluminum sheet (Optional)
MS-GXL15
MS-A15F MS-A15H
FA
t 2
COMPONENTS
t 0.079
30
1.181
MACHINE
VISION
14
SYSTEMS
0.551
2.5
2-ø3.2
ø0.126
9
0.098
UV
CURING
0.354
39.5
7
1.555
2-3.2 × 5.1
SYSTEMS
0.276
0.126 × 0.201
oblong holes
MS-A15H:
4
(
)
30 1.181
0.157
2-M3 × 0.5 0.020 tapped holes
Selection
Guide
Material: SPCC
9
t = 0.3 0.012
0.354
21
Amplifier
Built-in
1.9
1.9
0.075
0.827
0.075
Amplifier-
separated
GX-F/H
GXL
GL
GX-U/GX-FU/
GX-N
GX
776
MEMO
相关型号：
©2020 ICPDF网 联系我们和版权申明