Electronic Components Datasheet Search
English 中文版
Manufacturer Upload
Part Name:
 
Description:
ELM32404LA-S  ELM32418LA-S  ELM32420LA-S  
H7CX-A114USDG Multifunction Preset Counter
Prototype PCB
Part No.:   H7CX-A114USDG
Download: Download   Right selection Save Target As
View Datasheet (Html)   No need to install PDF reader software
Description:   Multifunction Preset Counter
File Size :   2406 K    
Page : 43 Pages
Logo:   
Maker   OMRON [ OMRON ELECTRONICS LLC ]http://www.omron.com
Buy Now :   
  H7CX-A114USDG Datasheet PDF page 15 H7CX-A114USDG Datasheet PDF page 16 H7CX-A114USDG Datasheet PDF page 17 H7CX-A114USDG Datasheet PDF page 18 H7CX-A114USDG Datasheet PDF page 20 H7CX-A114USDG Datasheet PDF page 21 H7CX-A114USDG Datasheet PDF page 22 H7CX-A114USDG Datasheet PDF page 23  
100%
I
Operating Environment
Use the product within the ratings specified for submerging in water
and exposure to oil.
Do not use the product in locations subject to vibrations or shocks.
Using the product in such locations over a long period may result in
damage due to stress.
Do not use the product in locations subject to dust, corrosive
gases, or direct sunlight.
Separate the input signal devices, input signal cables, and the
product from the source of noise or high-tension cables producing
noise.
Separate the product from the source of static electricity when
using the product in an environment where a large amount of static
electricity is produced (e.g., forming compounds, powders, or fluid
materials being transported by pipe).
Organic solvents (such as paint thinner), as well as very acidic or
basic solutions might damage the outer casing of the H7CX.
Use the product within the ratings specified for temperature and
humidity.
Do not use the product in locations where condensation may occur
due to high humidity or where temperature changes are severe.
Store at the specified temperature. If the H7CX has been stored at
a temperature of less than -10°C, allow the H7CX to stand at room
temperature for at least 3 hours before use.
Leaving the H7CX with outputs ON at a high temperature for a long
time may hasten the degradation of internal parts (such as electro-
lytic capacitors). Therefore, use the product in combination with
relays and avoid leaving the product as long as more than 1 month
with the output turned ON.
X
2
/b
T/a
X
1
/a
X
1
/a
T
X
1
X
X
2
Auxiliary relay
(e.g., MY Relay)
The load current must be within the rated current.
I
Insulation
Specifications call for basic insulation between the power supply
and input terminals, between the power supply and output termi-
nals, and between the input and output terminals. (The H7CX-A@D
is not insulated between the power supply and input terminals.)
Input and output terminals are connected to devices without
exposed charged parts.
Input and output terminals are connected to devices with basic
insulation that is suitable for the maximum operating voltage.
Multifunction Preset Counter
H7CX
C-105
Counters
Home - IC Supply - Link
Copyright© 2001 - 2014 ICPDF All Rights Reserved ICPDF.COM

粤公网安备 44030402000629号


粤ICP备13051289号-7