Electronic Components Datasheet Search
English 中文版
Manufacturer Upload
Part Name:
 
Description:
H7CX-A114USDG Multifunction Preset Counter
Prototype PCB
Part No.:   H7CX-A114USDG
Download: Download   Right selection Save Target As
View Datasheet (Html)   No need to install PDF reader software
Description:   Multifunction Preset Counter
File Size :   2406 K    
Page : 43 Pages
Logo:   
Maker   OMRON [ OMRON ELECTRONICS LLC ]http://www.omron.com
Buy Now :   
  H7CX-A114USDG Datasheet PDF page 16 H7CX-A114USDG Datasheet PDF page 17 H7CX-A114USDG Datasheet PDF page 18 H7CX-A114USDG Datasheet PDF page 19 H7CX-A114USDG Datasheet PDF page 21 H7CX-A114USDG Datasheet PDF page 22 H7CX-A114USDG Datasheet PDF page 23 H7CX-A114USDG Datasheet PDF page 24  
100%
Operating Procedures
I
Setting Procedure Guide
Setting for Counter Operation
(1-stage/2-stage Counter, Total and Preset Counter, Batch Counter, Dual Counter)
When Using Basic Settings Only
Basic Settings
Counting speed (30 Hz, 5 kHz)
Input mode (UP, DOWN)
Output mode (N, F, C, K-1)
One-shot output time (0.5 s, 0.05 s)(See note 2.)
Reset input signal width (20 ms, 1 ms)
NPN/PNP input mode (NPN, PNP)
The settings can be performed easily with the DIP switch.
For details on the setting methods, refer to page 21.
1
ON
2
3
4
5
6
7
8
OFF
When Using Settings Other than the Above
All the functions can be set with the operation keys.
For details on the setting methods, refer to page 22.
Other Settings
Input mode (UP/DOWN A, UP/DOWN B, UP/DOWN C)
Output mode (R, P, Q, A, K-2, D, L, H)
One-shot output time (except for 0.5 s and 0.05 s) (See note 2.)
When Using Advanced Functions
Settings for advanced functions other than the basic
settings above can be performed with the operation keys.
For details on the setting methods, refer to page 22.
Advanced Functions
Dual count calculating mode
Output 1 time (for 2-stage counter)
Decimal point position
Prescale value
Display color
Output allocation
Key protect level
Note: 1.
At the time of delivery, the H7CX is set to the 1-stage counter (2-stage counter for H7CX-AW@/-A4W@ models) configuration.
2.
Set to output 2 time when using as a 2-stage counter or batch counter.
Setting for Tachometer Operation
When Using Basic Settings Only
Basic Settings
Counting speed (30 Hz, 10 kHz)
Output mode (HI-LO, AREA, HI-HI, LO-LO)
Average processing (OFF, 2, 4, 8 times)
NPN/PNP input mode (NPN, PNP)
The settings can be performed easily with the DIP switch.
For details on the setting methods, refer to page 33.
1
ON
2
3
4
5
6
7
8
OFF
When Using Advanced Functions
Settings for advanced functions other than the basic
settings above can be performed with the operation keys.
For details on the setting methods, refer to page 34.
Advanced Functions
Decimal point position
Prescale value
Auto-zero time
Startup time
Display color
Output allocation
Key protect level
Note:
At the time of delivery, the H7CX is set to the 2-stage counter (1-stage counter for H7CX-AU@ models) configuration.
C-106
Multifunction Preset Counter
H7CX
Home - IC Supply - Link
Copyright© 2001 - 2014 ICPDF All Rights Reserved ICPDF.COM

粤公网安备 44030402000629号


粤ICP备13051289号-7