LY4FDC24 [OMRON]
Power/Signal Relay, 4PDT, Momentary, 0.069A (Coil), 24VDC (Coil), 1500mW (Coil), 10A (Contact), 24VDC (Contact), DC Input, AC/DC Output, Panel Mount,;![LY4FDC24](http://pdffile.icpdf.com/pdf2/p00248/img/icpdf/LY4-0DC6_1506590_icpdf.jpg)
型号: | LY4FDC24 |
厂家: | ![]() |
描述: | Power/Signal Relay, 4PDT, Momentary, 0.069A (Coil), 24VDC (Coil), 1500mW (Coil), 10A (Contact), 24VDC (Contact), DC Input, AC/DC Output, Panel Mount, 光电二极管 继电器 |
文件: | 总16页 (文件大小:714K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
General Purpose Relay
LY
• Arc barrier equipped.
• High dielectric strength (2,000 VAC).
• Long dependable service life assured by Ag-Alloy contacts.
• Choose models with single or bifurcated contacts,
LED indicator, diode surge suppression,
push-to-test button, or RC circuit.
• UL, CSA, TUV, and CE approvals
on all standard LY Relay Part Numbers.
Ordering Information
To Order: Select the part number and add the desired coil voltage rating (e.g., LY1-DC6).
Type
Terminal
Contact
form
Model
—
Single contact
Bifurcated contact
Standard
Upper
mounting
bracket
Standard
Upper
mounting
bracket
bracket
bracket
mounting
mounting
Standard
Plug-in/solder
PCB
SPDT
LY1
LY2
LY3
LY4
LY1F
LY2F
LY3F
LY4F
—
DPDT
3PDT
4PDT
SPDT
DPDT
3PDT
4PDT
SPDT
DPDT
3PDT
4PDT
SPDT
DPDT
3PDT
4PDT
SPDT
DPDT
4PDT
SPDT
DPDT
SPDT
DPDT
LY2Z
LY2ZF
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
LY1-0
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
LY2-0
LY2Z-0
LY3-0
—
LY4-0
—
LED indicator
Plug-in/solder
LY1N
—
LY2N
LY2ZN
LY3N
—
LY4N
—
Diode surge
suppression
LY1-D
—
LY2-D
LY2Z-D
LY3-D
—
LY4-D
—
LED indicator
and diode surge
suppression
LY1N-D2
LY2N-D2
LY4N-D2
LY1-CR
LY2-CR
LY1N-CR
LY2N-CR
—
LY2ZN-D2
—
RC circuit
—
LY2Z-CR
—
LED indicator
and RC circuit
LY2ZN-CR
Note: 1. Types with specifications other than those listed are available. Contact your Omron Sales representative.
2. To order connecting sockets and mounting tracks, see “Accessories” section.
3. Relays with RC circuit are only available in AC coil voltages of 100 VAC or greater.
General Purpose Relay LY
285
Type
Terminal
Contact
form
Model
—
Single contact
Bifurcated contact
Standard
Upper
mounting
bracket
Standard
Upper
mounting
bracket
bracket
bracket
mounting
mounting
Push-to-test
button
Plug-in/solder
Plug-in/solder
SPDT
LY1l4
—
—
—
—
—
—
—
—
—
—
—
—
DPDT
3PDT
4PDT
DPDT
4PDT
LY2l4
LY2Zl2
LY3l4
—
—
LY4l4
LED indicator and
push-to-test button
LY2l4N
LY4l4N
LY2Zl2N
—
Note: 1. Types with specifications other than those listed are available. Contact your Omron Sales representative.
2. To order connecting sockets and mounting tracks, see “Accessories” section.
■ Accessories
Connecting Sockets
To Order: Select the appropriate part numbers for sockets, clips, and mounting tracks (if required) from the following charts.
Track Mounted Sockets
Relay
Socket*
Relay hold-down clip
Standard RC circuit
Mounting track
SPDT
DPDT
3PDT
4PDT
PTF08A-E
PYC-A1
Y92H-3
PFP-100N/PFP-50N &
PFP-M or PFP-100N2
PFP-S (Option spacer)
PTF11A
PTF14A-E
* Track mounted socket can be used as a front connecting socket.
Back Connecting Sockets
Relay
Solder
terminal
socket
Wire wrap
terminal
socket
Relay hold-down clip
Standard Push-to-test RC circuit Mtg. plate
PYC-P PYC-P2 PYC-1 PYC-S
Socket Mounting Plate
10 12
1
18
SPDT
PT08
PT08QN
PYP-1
–
–
PYP-18
DPDT
3PDT
4PDT
PT11
PT14
PT11QN
PT14QN
PTP-1-3
PTP-1
–
PTP-12
–
–
PTP-10
–
Note: Types PYP-18, PTP-12 and PTP-10 may be cut to any desired length.
Relay PC terminal socket
Relay hold-down clip
Push-to-test
Standard
RC circuit
SPDT
DPDT
3PDT
4PDT
PT08-0
PYC-P
PYC-P2
PYC-1
PT11-0
PT14-0
286
General Purpose Relay LY
Specifications
■ Contact Data
Load
Single contact
Bifurcated contact
DPDT
SPDT
DPDT, 3PDT, 4PDT
Resistive load
Inductive load
Resistive load
Inductive load
(p.f. = 0.4)
(L/R = 7 ms)
Resistive load
Inductive load
(p.f. = 0.4)
(L/R = 7 ms)
(p.f. = 1)
(p.f. = 0.4)
(p.f. = 1)
(p.f. = 1)
(L/R = 7 ms)
Rated load
15 A at 110 VAC
15 A at 24 VDC
10 A at 110 VAC
7 A at 24 VDC
10 A at 110 VAC
10 A at 24 VDC
7.5 A at 110 VAC
5 A at 24 VDC
5 A at 110 VAC
5 A at 24 VDC
4 A at 110 VAC
4 A at 24 VDC
Contact material Ag-Alloy
Carry current
15 A
10 A
7 A
7 A
Max. operating
voltage
250 VAC
125 VDC
15 A
Max. operating
current
10 A
Max. switching
capacity
1,700 VA
360 W
1,100 VA
170 W
1,100 VA
240 W
825 VA
120 W
550 VA
440 VA
100 W
120 W
Min. permissible 100 mA, 5 VDC
load
10 mA, 5 VDC
■ Coil Data
1- and 2-pole Types – AC
Rated
Rated current (mA)
50 Hz 60 Hz
214.10
Coil
resistance
(Ω)
Coil inductance
(ref. value) (H)
Pick-up
voltage
Dropout
Maximum
voltage
Power
consumption
(VA, W)
voltage (V)
voltage
Armature
OFF
Armature
ON
(% of rated voltage)
6
183
91
12.20
46
0.04
0.08
0.33
1.30
5.66
80% max.
30% min.
110%
Approx.
1.00 to 1.20
(60 Hz)
12
106.50
53.80
25.70
0.17
24
46
180
0.69
50
22
788
3.22
100/110
110/120
200/220
220/240
11.70/12.90 10/11
3,750
4,430
12,950
18,790
14.54
19.20
54.75
83.50
24.60
32.10
94.07
136.40
Approx.
0.90 to 1.10
(60 Hz)
9.90/10.80
6.20/6.80
4.80/5.30
8.40/9.20
5.30/5.80
4.20/4.60
1- and 2-pole Types – DC
Rated
voltage (V)
Rated current (mA)
Coil
resistance
(Ω)
Coil inductance
(ref. value) (H)
Pick-up
voltage
Dropout
voltage
Maximum
voltage
Power
consumption
(VA, W)
Armature
OFF
Armature
ON
(% of rated voltage)
6
150
75
40
0.16
0.33
80% max. 10% min. 110%
Approx.
0.90
12
160
0.73
1.37
5.72
21
24
36.90
650
3.20
48
18.50
2,600
11,000
10.60
45.60
100/110
9.10/10
86.20
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C (73°F) with tolerances of +15%, -20% for AC rated
current, and 15% for DC rated coil resistance.
2. The AC coil resistance and inductance are reference values at 60 Hz.
3. The performance characteristics are measured at a coil temperature of 23°C (73°F).
4. Class B coil insulation is available.
General Purpose Relay LY
287
3-pole Type – AC
Rated
voltage (V)
Rated current (mA)
Coil
resistance
(Ω)
Coil inductance
(ref. value) (H)
Pick-up
voltage
Dropout
voltage
Maximum
voltage
Power
consumption
(VA, W)
50 Hz
310
60 Hz
270
Armature Armature
(% of rated voltage)
30% min. 110%
OFF
0.03
ON
6
6.70
24
0.05
0.21
0.79
3.87
80% max.
Approx.
1.60 to 2.00
(60 Hz)
12
159
80
134
67
0.12
24
100
410
0.44
50
38
33
2.24
100/110
120
15.90/18.30 13.60/15.60 2,300
10.50
11.50
34.80
38.60
18.50
20.60
59.50
74.60
17.30
10.50/11.60 9.00/9.90
9.40
14.8
2,450
8,650
10,400
200/220
240
8
3-pole Type – DC
Rated
voltage
(V)
Rated current (mA)
Coil
Coil inductance
(ref. value) (H)
Pick-up
voltage
Dropout
voltage
Maximum
voltage
Power
consumption
(VA, W)
resistance
(Ω)
Armature Armature
(% of rated voltage)
OFF
ON
6
234
25.70
107
0.11
0.21
0.98
3.87
80% max.
10% min.
110%
Approx.
1.40
12
112
0.45
1.89
8.53
29.60
24
58.60
28.20
12.70/13
410
48
1,700
8,500
13.90
54.30
100/110
4-pole Type – AC
Rated
Rated current (mA)
50 Hz 60 Hz
386 330
Coil
resistance
(Ω)
Coil inductance
(ref. value) (H)
Pick-up
voltage
Dropout
Maximum
voltage
Power
consumption
(VA, W)
voltage (V)
voltage
Armature Armature
(% of rated voltage)
OFF
0.02
ON
6
5
0.04
0.17
0.67
2.88
80% max.
30% min.
110%
Approx.
1.95 to 2.50
(60 Hz)
12
199
170
80
20
0.10
24
93.60
46.80
78
0.38
50
40
350
1,800
2,200
1.74
100/110
120
22.50/25.50 19/21.80
19.00 16.40
10.50
9.30
17.30
19
200/220
240
11.50/13.10 9.80/11.20 6,700
11.00 9.50 9,000
33.10
33.20
57.90
63.40
4-pole Type – DC
Rated
voltage (V)
Rated current (mA)
Coil
Coil inductance
(ref. value) (H)
Pick-up
voltage
Dropout
Maximum
voltage
Power
consumption
(VA, W)
resistance
voltage
(Ω)
Armature Armature
(% of rated voltage)
OFF
ON
6
240
25
0.09
0.21
0.84
2.91
80% max.
10% min.
110%
Approx.
1.50
12
120
100
0.39
1.41
6.39
32
24
69
350
48
30
1,600
6,900
13.60
63.70
100/110
15/15.90
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C (73°F) with tolerances of +15%, -20% for AC rated
current, and 15% for DC rated coil resistance.
2. The AC coil resistance and inductance are reference values at 60 Hz.
3. The performance characteristics are measured at a coil temperature of 23°C (73°F).
4. Class B coil insulation is available.
288
General Purpose Relay LY
■ Characteristics
Contact resistance
50 mΩ max.
Operate time
25 ms max.
Release time
25 ms max.
Operating frequency
Mechanically
18,000 operations/hour
Under rated load
1,800 operations/hour
Insulation resistance
Dielectric strength
100 MΩ min. (at 500 VDC)
2,000 VAC, 50/60 Hz for 1 minute
1,000 VAC, 50/60 Hz for 1 minute between contacts of same polarity
10 to 55 Hz, 1.00 mm (0.04 in) double amplitude
Vibration
Shock
Mechanical durability
Malfunction durability 10 to 55 Hz, 1.00 mm (0.04 in) double amplitude
1,000 m/s2 (approx. 100 G)
200 m/s2 (approx. 20 G)
Mechanical durability
Malfunction durability
Operating
Ambient temperature
Humidity
LY1, LY2, LY3: -25° to 55°C; LY4 =-25° to 40°C
35 to 85% RH
Service Life
Mechanically
Electrically
AC: 50 million operations min. (at operating frequency of 18,000 operations/hour)
DC: 100 million operations min. (at operating frequency of 18,000 operations/hour)
See “Characteristic Data”
Weight
SPDT, DPDT: Approx. 40 g (1.41 oz), 3PDT: Approx. 50 g (1.76 oz)
4PDT: Approx. 70 g (2.47 oz)
Note: Data shown are of initial value.
■ Characteristic Data
Maximum switching capacity
LY1
LY2
LY3, LY4
LY2Z
Rated operating voltage (V)
Rated operating voltage (V)
Rated operating voltage (V)
Rated operating voltage (V)
Electrical service life
LY1
LY2
LY3, LY4
LY2Z
Switching current (A)
Switching current (A)
Switching current (A)
Switching current (A)
General Purpose Relay LY
289
Dimensions
Unit: mm (inch)
■ Relays
LY1
Terminal
LY2
Terminal
arrangement
(Bottom view)
arrangement
(Bottom view)
LY3
Terminal
arrangement
(Bottom view)
LY4
Terminal
arrangement
(Bottom view)
LY1-0, LY2-0, LY3-0, LY4-0
Mounting holes for LY1-0, LY2-0, LY3-0, LY4-0
(Bottom view)
Note: The above drawing shows LY2-0. With LY1-0,
SPTD
DPDT
3PDT
4PDT
dimension “*” should read as eight 6.35 (.25).
LY1F, LY2F
Mounting
holes
LY3F
Mounting
holes
Note: The above drawing shows LY1F. With LY2F, dimension “*”
should read as eight 3.05 mm (0.12 in) dia. holes.
290
General Purpose Relay LY
LY4F
Mounting holes
LY1S, LY2S
Round hole
Rectangular hole
Note: The above drawing shows LY2S-US. With LY1S-US, dimension “*”
should read as eight 2.03 mm (0.08 in) dia. holes.
LY3S
Round hole
Rectangular hole
LY4S
Round hole
Rectangular hole
General Purpose Relay LY
291
■ Accessories
Unit: mm (inch)
Track mounted sockets (UL File No. E87929) (CSA Report No. LR31928)
PTF08A
(see note 3)
Terminal arrangement/
mounting holes
(Top view)
PTF11A
Terminal arrangement/
mounting holes
(Top view)
Track mounting sockets (UL File No. E87929) (CSA Report No. LR31928)
PTF14A
(see note 3)
Terminal arrangement/
mounting holes
(Top view)
Mounting height of
relay with socket
(Applies to all PTF❏A sockets)
Note: 1. UL/CSA does not apply to wire wrap (Q) type sockets.
2. Values in brackets for LY❏CR.
3. PTF08A-E and PTF14A-E = touch safe screws. Height = 33 mm max.
Back connecting socket (UL File No. E87929) (CSA Report No. LR31928)
PT08
Terminal arrangement/
(Bottom view)
PT11
Terminal arrangement/
(Bottom view)
292
General Purpose Relay LY
Back connecting socket (UL File No. E87929) (CSA Report No. LR31928)
PT14
Terminal arrangement
(Bottom view)
Mounting height of relay with socket
(Applies to all PT sockets)
PT
Note: Values in brackets for LY❏CR.
Back connecting socket (UL File No. E87929) (CSA Report No. LR31928)
PT08QN
PT11QN
PT14QN
Panel cut-out and terminal
arrangement are the same
as Type PT08.
Panel cut-out and terminal
arrangement are the same
as Type PT11.
Panel cut-out and terminal
arrangement are the same
as Type PT14.
Back connecting socket (UL File No. E87929) (CSA Report No. LR31928)
PT08-0
Terminal arrangement is
the same as Type PT08.
Mounting holes
(Bottom view)
PT11-0
Terminal arrangement is
the same as Type PT11.
Mounting holes
(Bottom view)
Back connecting socket (UL File No. E87929) (CSA Report No. LR31928)
PT14-0
Terminal arrangement is
the same as Type PT14.
Mounting holes
(Bottom view)
General Purpose Relay LY
293
Unit: mm (inch)
Relay hold-down clips
PYC-A1
For PTF❏A socket
PYC-S
PYC-P
For PT❏ socket
For relay mounting plates
(Applicable to Type PYP-1 and PYP-18
socket mounting plates only.)
Relay hold-down clips
PYC-P2
For push-to-test button type with
PT❏ socket
Y92H-3
For RC circuit type
PYC-1
For RC circuit type
Mounting track/end plate/spacer
PFP-100N, PFP-50N
(Conforming to EN 50022)
PFP-100N2
(Conforming to EN 50022)
16
7.3 0.15
35 0.3
4.5
4.5
27
35 0.3
29.2
1.5
24
27 0.15
15 25
25
25
25 15
15 25
25
25
25
*
1
15 (5)
1
10
10
10
10
1000 4
1000 (500)*
* The figure in parenthesis is for PFP-50N.
*This dimension is 14.99 mm (0.59 in) on both ends in the case of PFP-100N, but on one end in the case of PFP-50N.
** L = Length
PFP-50N
PFP-100N
PFP-100N2
L = 497.84 mm (19.60 in)
L = 990.60 mm (39.00 in)
L = 990.60 mm (39.00 in)
***A total of twelve 24.89 x 4.57 mm (0.98 x 0.18 in) elliptic holes are provided, with six holes cut from each end of the track at a pitch
of 9.91 (0.39) between holes.
294
General Purpose Relay LY
PFP-M end plate
PFP-S spacer
Socket mounting plates [t=1.52 (.06)]
Number of socket specs.
Socket needed
PT08, PT08QN
PT11, PT11QN
PT14, PT14QN
PTP-10
1
10
–
12
18
PYP-1
PTP-1-3
PTP-1
PTP-12
–
PYP-18
–
PTP-1-2
_
–
PTP-10
–
PYP-1
PTP-1-3
PTP-1
PYP-18
PTP-10
PTP-12
General Purpose Relay LY
295
■ Relay Options
LED Indicator
Specifications and dimensions same as the Standard Type with the following exception. With the LED indicator type, the rated current is approxi-
mately 0 to 5.0 mA higher than the Standard Type.
Terminal arrangement/Internal connections (Bottom view)
LY2N
DC coil rating type
AC coil rating type
1
3
2
4
1
3
2
4
5
7
6
8
5
7
6
8
Note: 1. The coil terminals 10 and 11 of Type LY3N become (-) and (+) and terminals 13 and 14 of Type LY4N become (-) and (+), respectively.
2. Pay special attention to the polarities when using the DC type.
Diode Surge Suppression
Specifications and dimensions same as the Standard Type with the following exception. Ambient operating temperature: -25° to 40°C
(-13° to 104°F)
Without Diode
With Diode
Terminal arrangement/Internal connections (Bottom view)
LY2(N)-D(2)
LY2-D
6, 12, 24, 48
100/110 VDC
LY2N-D2
6, 12, 24, 48 VDC
LY2N-D2
100/110 VDC
Note: 1. Pay special attention to the polarities when using the DC type.
2. The release time is somewhat longer, but satisfies the standard specifications of 25 ms.
3. The reverse-breakdown voltage of the diode is 1,000 VDC.
4. Available on DC versions only.
296
General Purpose Relay LY
■ Relay Options
RC Circuit
Specifications and dimensions same as the Standard Type with the following exceptions.
Characteristic Data
Without RC circuit
With RC circuit
LY1-CR, LY2(Z)-CR
Terminal arrangement/Internal connections (Bottom view)
LY1-CR
LY2(Z)-CR
Note: 1. The above drawing shows LY2(Z)-CR. With LY1-CR, “*” should read eight 2.03 mm (0.08 in) dia. holes.
2. Available on AC versions only.
Push-to-test Button
Specifications and dimensions same as the Standard Type with the following exceptions.
LY❏I2
LY1I2, LY2I2
Note: Type LY1I2 has the same dimensions and appearances as Type LY2I2 shown except that dimensions “*” is 2.03 mm (0.08 in) dia. holes.
LY3I2 LY4I2
General Purpose Relay LY
297
■ Approvals
UL Recognized Type (File No. E41643)
Type
Contact form
SPDT
Coil ratings
6 to 240 VAC
6 to 120 VDC
Contact ratings
15A, 30VDC (Resistive), 40°C
15A, 240VAC (General use), 40°C
TV-5, 120VAC, 40°C
Number of test operations
6 x 103
LY1❏
25 x 103
6 x 103
1/2HP, 120VAC, 50°C
LY2❏
DPDT
15A, 28VDC (Resistive), 40°C
15A, 120VAC (Resistive), 40°C
12A, 240VAC (General use), 40°C
1/2HP, 120VAC, 50°C
25 x 103
6 x 103
TV-3, 120VAC, 40°C
LY3❏
LY4❏
3PDT
4PDT
10A, 30VDC (Resistive), 40°C (Same polarity )
10A, 240VAC (General use), 40°C (Same polarity )
1/2HP, 240VAC, 40°C
6 x 103
LY2Z❏
(Bifurcated)
DPDT
7A, 240VAC (General use), 40°C
7A, 28VDC (Resistive), 40°C
CSA Certified Type (File No. LR31928)
Type
Contact form
SPDT
Coil ratings
6 to 240 VAC
Contact ratings
15 A, 120 VAC (Inductive)
10 A, 240 VAC (Inductive)
15 A, 28 VDC (Resistive)
TV-5 (ACTV)
LY1❏
6 to 120 VDC
LY2❏
DPDT
13 A, 28 VDC (Resistive)
12 A, 120 VAC (Inductive)
10 A, 240 VAC (Inductive)
1/3 HP, 120 VAC (Motor)
TV-3 (ACTV)
LY3❏
LY3❏
3PDT
4PDT
10 A, 240 VAC (Inductive)
10 A, 28 VDC (Resistive)
VDE Approved Type (File No. 9903 [SPDT, DPDT & 3PDT], File No. 9947 [4PDT])
Type
Contact form
SPDT
Coil ratings
6, 12, 24, 50,
Contact ratings
LY❏-VD
LY❏-VD
10 A, 220 VAC (Resistive)
10 A, 28 VDC (Resistive)
7 A, 220 VAC (Inductive)
7 A, 28 VDC (Inductive)
7 A, 220 VAC (Resistive)
7 A, 28 VDC (Resistive)
110, 220 VAC
and 6, 12, 24,
48, 110 VDC
DPDT
3PDT
4PDT
4 A, 28 VDC and 4A, 220 VAC (Inductive)
LR (Lloyd's Register) Approved Type (File No. 562KOB-204523)
Type
Contact form
DPDT
4PDT
Coil ratings
6 to 240 VAC
6 to 110 VDC
Contact ratings
Contact ratings
LY❏
7.5 A, 230 VAC (Inductive)
5 A, 24 VDC (Inductive)
SEV Listed Type (File No. D7 91/82 [2- & 4-pole], D 91/204a [1- & 3-pole])
Type
Contact form
SPDT
Coil ratings
6 to 240 VAC
6 to 110 VDC
LY❏-SV
LY❏-SV
15 A, 220 VAC (Resistive)
15 A, 24 VDC (Resistive)
10 A, 220 VAC (Resistive)
10 A, 24 VDC (Resistive)
DPDT
3PDT
4PDT
Note: 1. The rated values approved by each of the safety standards (e.g., UL, CSA, VDE, and SEV) may be different from the performance char-
acteristics individually defined in this catalog.
2. In the interest of product improvement, specifications are subject to change.
298
General Purpose Relay LY
(b) Use in consumer Products or any use in significant quantities.
(c) Energy control systems, combustion systems, railroad systems, aviation systems,
medical equipment, amusement machines, vehicles, safety equipment, and
installations subject to separate industry or government regulations.
(d) Systems, machines, and equipment that could present a risk to life or property.
3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING
SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE
PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE
WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED
VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY
SELLER.
5. Programmable Products: Seller shall not be responsible for the Buyer's programming of
a programmable Product.
Omron Electronic Components, LLC
Terms and Conditions of Sales
I. GENERAL
1. Definitions: The words used herein are defined as follows.
(a) Terms:
(b) Seller:
(c) Buyer:
These terms and conditions
Omron Electronic Components LLC and its subsidiaries
The buyer of Products, including any end user in section III through VI
(d) Products: Products and/or services of Seller
(e) Including: Including without limitation
2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments,
invoices, purchase orders and other documents, whether electronic or in writing, relating
to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's
purchase order or other documents which are inconsistent with, or in addition to, these
Terms.
3. Distributor: Any distributor shall inform its customer of the contents after and including
section III of these Terms.
IV. WARRANTY AND LIMITATION
1. Warranty: Seller's exclusive warranty is that the Products will be free from defects in
materials and workmanship for a period of twelve months from the date of sale by Seller
(or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY
OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES,
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE OF THE PRODUCTS.
2. Buyer Remedy: Seller's sole obligation hereunder shall be to replace (in the form
originally shipped with Buyer responsible for labor charges for removal or replacement
thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an
amount equal to the purchase price of the Product; provided that there shall be no
liability for Seller or its affiliates unless Seller's analysis confirms that the Products were
correctly handled, stored, installed and maintained and not subject to contamination,
abuse, misuse or inappropriate modification. Return of any Products by Buyer must be
approved in writing by Seller before shipment.
3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED
WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT,
WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL
LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF
THE PRODUCT ON WHICH LIABILITY IS ASSERTED.
4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and its
employees from and against all liabilities, losses, claims, costs and expenses (including
attorney's fees and expenses) related to any claim, investigation, litigation or proceeding
(whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or
omissions under these Terms or in any way with respect to the Products.
II. SALES
1. Prices; Payment: All prices stated are current, subject to change without notice by Seller.
Buyer agrees to pay the price in effect at the time the purchase order is accepted by
Seller. Payments for Products received are due net 30 days unless otherwise stated in
the invoice. Buyer shall have no right to set off any amounts against the amount owing in
respect of this invoice.
2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to
Buyer after deducting transportation charges, taxes and duties, and will be allowed only
if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past
due amounts owing to Seller.
3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the maximum
legal rate, whichever is less, on any balance not paid within the stated terms.
4. Orders: Seller will accept no order less than 200 U.S. dollars net billing.
5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer
shall make remittance to Seller at the then current exchange rate most favorable to
Seller; provided that if remittance is not made when due, Buyer will convert the amount
to U.S. dollars at the then current exchange rate most favorable to Seller available
during the period between the due date and the date remittance is actually made.
6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining
any government approvals regarding the importation or sale of the Products.
7. Taxes: All taxes, duties and other governmental charges (other than general real
property and income taxes), including any interest or penalties thereon, imposed directly
or indirectly on Seller or required to be collected directly or indirectly by Seller for the
manufacture, production, sale, delivery, importation, consumption or use of the Products
sold hereunder (including customs duties and sales, excise, use, turnover and license
taxes) shall be charged to and remitted by Buyer to Seller.
V. INFORMATION; ETC.
1. Intellectual Property: The intellectual property embodied in the Products is the exclusive
property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way
without the written permission of Seller. Buyer (at its own expense) shall indemnify and
hold harmless Seller and defend or settle any action brought against Seller to the extent
that it is based on a claim that any Product made to Buyer specifications infringed
intellectual property rights of another party.
2. Property; Confidentiality: Notwithstanding any charges to Buyer for engineering or
tooling, all engineering and tooling shall remain the exclusive property of Seller. All
information and materials supplied by Seller to Buyer relating to the Products are
confidential and proprietary, and Buyer shall limit distribution thereof to its trusted
employees and strictly prevent disclosure to any third party.
3. Performance Data: Performance data is provided as a guide in determining suitability
and does not constitute a warranty. It may represent the result of Seller's test conditions,
and the users must correlate it to actual application requirements.
4. Change In Specifications: Product specifications and descriptions may be changed at
any time based on improvements or other reasons. It is Seller’s practice to change part
numbers when published ratings or features are changed, or when significant
engineering changes are made. However, some specifications of the Product may be
changed without any notice.
8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to Seller,
Seller reserves the right to stop shipments or require satisfactory security or payment in
advance. If Buyer fails to make payment or otherwise comply with these Terms or any
related agreement, Seller may (without liability and in addition to other remedies) cancel
any unshipped portion of Products sold hereunder and stop any Products in transit until
Buyer pays all amounts, including amounts payable hereunder, whether or not then due,
which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid
accounts.
9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer
indemnifies Seller fully against all costs or expenses arising in connection therewith.
10. Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting from
causes beyond its control, including earthquakes, fires, floods, strikes or other labor
disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots,
delay in or lack of transportation or the requirements of any government authority.
11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller:
(a) All sales and shipments of Products shall be FOB shipping point (unless otherwise
stated in writing by Seller), at which point title to and all risk of loss of the Products
shall pass from Seller to Buyer, provided that Seller shall retain a security interest in
the Products until the full purchase price is paid by Buyer;
5. Errors And Omissions: The information on Seller’s website or in other documentation
has been carefully checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
6. Export Controls: Buyer shall comply with all applicable laws, regulations and licenses
regarding (a) export of the Products or information provided by Seller; (b) sale of
Products to forbidden or other proscribed persons or organizations; (c) disclosure to non-
citizens of regulated technology or information.
(b) Delivery and shipping dates are estimates only; and
(c) Seller will package Products as it deems proper for protection against normal
handling and extra charges apply to special conditions.
12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products
occurring before delivery to the carrier or any claim related to pricing or other charges
must be presented in detail in writing to Seller within 30 days of receipt of shipment.
III. PRECAUTIONS
VI. MISCELLANEOUS
1. Suitability: IT IS THE BUYER’S SOLE RESPOINSIBILITY TO ENSURE THAT ANY
OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE
APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING
APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE
BUYER’S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC
COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E)
SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT.
Buyer acknowledges that it alone has determined that the Products will meet their
requirements of the intended use in all cases. Buyer must know and observe all
prohibitions of use applicable to the Product/s.
1. Waiver: No failure or delay by Seller in exercising any right and no course of dealing
between Buyer and Seller shall operate as a waiver of rights by Seller.
2. Assignment: Buyer may not assign its rights hereunder without Seller's written consent.
3. Law: These Terms are governed by Illinois law (without regard to conflict of laws).
Federal and state courts in Cook County, Illinois have exclusive jurisdiction for any
dispute hereunder.
4. Amendment: These Terms constitute the entire agreement between Buyer and Seller
relating to the Products, and no provision may be changed or waived unless in writing
signed by the parties.
5. Severability: If any provision hereof is rendered ineffective or invalid, such provision shall
not invalidate any other provision.
2. Use with Attention: The followings are some examples of applications for which
particular attention must be given. This is not intended to be an exhaustive list of all
possible use of any Product, nor to imply that any use listed may be suitable for any
Product:
(a) Outdoor use, use involving potential chemical contamination or electrical
interference.
General Purpose Relay LY
Certain Precautions on Specifications and Use
1. Suitability for Use. Seller shall not be responsible for conformity with any stan- 2. Programmable Products. Seller shall not be responsible for the user's pro-
dards, codes or regulations which apply to the combination of the Product in
gramming of a programmable product, or any consequence thereof.
Buyer's application or use of the Product. At Buyer's request, Seller will pro- 3. Performance Data. Performance data given in this publication is provided as
vide applicable third party certification documents identifying ratings and limi-
tations of use which apply to the Product. This information by itself is not
sufficient for a complete determination of the suitability of the Product in com-
bination with the end product, machine, system, or other application or use.
a guide for the user in determining suitability and does not constitute a war-
ranty. It may represent the result of Seller's test conditions, and the users must
correlate it to actual application requirements. Actual performance is subject to
Seller's Warranty and Limitations of Liability.
Buyer shall be solely responsible for determining appropriateness of the par- 4. Change in Specifications. Product specifications and accessories may be
ticular Product with respect to Buyer's application, product or system. Buyer
shall take application responsibility in all cases but the following is a non-
exhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety
equipment, and installations subject to separate industry or government
regulations.
(iii) Use in consumer products or any use in significant quantities.
(iv) Systems, machines and equipment that could present a risk to life or
property. Please know and observe all prohibitions of use applicable to this
product.
changed at any time based on improvements and other reasons. It is our prac-
tice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifica-
tions of the Product may be changed without any notice. When in doubt, spe-
cial part numbers may be assigned to fix or establish key specifications for
your application. Please consult with your Seller representative at any time to
confirm actual specifications of purchased Product.
5. Errors and Omissions. The information in this publication has been carefully
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors, or omissions.
6. RoHS Compliance. Where indicated, our products currently comply, to the
best of our knowledge as of the date of this publication, with the requirements
of the European Union's Directive on the Restriction of certain Hazardous
Substances ("RoHS"), although the requirements of RoHS do not take effect
until July 2006. These requirements may be subject to change. Please consult
our website for current information.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT
THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE
INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website
at http://www.components.omron.com – under the “About Us” tab, in the Legal Matters section.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.components.omron.com
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
847-882-2288
06/09
Specifications subject to change without notice
Printed in USA
Cat. No. X301-E-1
General Purpose Relay LY
相关型号:
![](http://pdffile.icpdf.com/pdf2/p00248/img/page/LY4-0DC6_1506590_files/LY4-0DC6_1506590_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00248/img/page/LY4-0DC6_1506590_files/LY4-0DC6_1506590_2.jpg)
LY4FDC48
Power/Signal Relay, 4PDT, Momentary, 0.03A (Coil), 48VDC (Coil), 1500mW (Coil), 10A (Contact), 24VDC (Contact), DC Input, AC/DC Output, Panel Mount,
OMRON
![](http://pdffile.icpdf.com/pdf2/p00248/img/page/LY4-0DC6_1506590_files/LY4-0DC6_1506590_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00248/img/page/LY4-0DC6_1506590_files/LY4-0DC6_1506590_2.jpg)
LY4FDC6
Power/Signal Relay, 4PDT, Momentary, 0.24A (Coil), 6VDC (Coil), 1500mW (Coil), 10A (Contact), 24VDC (Contact), DC Input, AC/DC Output, Panel Mount,
OMRON
![](http://pdffile.icpdf.com/pdf2/p00245/img/page/LY4I4N-AC110_1489207_files/LY4I4N-AC110_1489207_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00245/img/page/LY4I4N-AC110_1489207_files/LY4I4N-AC110_1489207_2.jpg)
LY4I4-AC110
Power/Signal Relay, 4PDT, Momentary, 2500mW (Coil), 10A (Contact), 24VDC (Contact), AC Input, AC/DC Output, Socket Mount
OMRON
![](http://pdffile.icpdf.com/pdf2/p00245/img/page/LY4I4N-AC110_1489207_files/LY4I4N-AC110_1489207_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00245/img/page/LY4I4N-AC110_1489207_files/LY4I4N-AC110_1489207_2.jpg)
LY4I4-AC12
Power/Signal Relay, 4PDT, Momentary, 2500mW (Coil), 10A (Contact), 24VDC (Contact), AC Input, AC/DC Output, Socket Mount
OMRON
![](http://pdffile.icpdf.com/pdf2/p00245/img/page/LY4I4N-AC110_1489207_files/LY4I4N-AC110_1489207_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00245/img/page/LY4I4N-AC110_1489207_files/LY4I4N-AC110_1489207_2.jpg)
LY4I4-AC120
Power/Signal Relay, 4PDT, Momentary, 2500mW (Coil), 10A (Contact), 24VDC (Contact), AC Input, AC/DC Output, Socket Mount
OMRON
![](http://pdffile.icpdf.com/pdf2/p00220/img/page/LY4N-D2-AC24_1279668_files/LY4N-D2-AC24_1279668_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00220/img/page/LY4N-D2-AC24_1279668_files/LY4N-D2-AC24_1279668_2.jpg)
LY4I4-AC220
Power/Signal Relay, 4PDT, Momentary, 2500mW (Coil), 10A (Contact), 24VDC (Contact), AC Input, AC/DC Output, Socket Mount
OMRON
![](http://pdffile.icpdf.com/pdf2/p00246/img/page/LY4I4N-AC24_1492602_files/LY4I4N-AC24_1492602_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00246/img/page/LY4I4N-AC24_1492602_files/LY4I4N-AC24_1492602_2.jpg)
LY4I4-AC24
Power/Signal Relay, 4PDT, Momentary, 2500mW (Coil), 10A (Contact), 24VDC (Contact), AC Input, AC/DC Output, Socket Mount
OMRON
![](http://pdffile.icpdf.com/pdf2/p00246/img/page/LY4I4N-AC24_1492602_files/LY4I4N-AC24_1492602_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00246/img/page/LY4I4N-AC24_1492602_files/LY4I4N-AC24_1492602_2.jpg)
LY4I4-AC240
Power/Signal Relay, 4PDT, Momentary, 2500mW (Coil), 10A (Contact), 24VDC (Contact), AC Input, AC/DC Output, Socket Mount
OMRON
![](http://pdffile.icpdf.com/pdf2/p00245/img/page/LY4I4N-AC110_1489207_files/LY4I4N-AC110_1489207_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00245/img/page/LY4I4N-AC110_1489207_files/LY4I4N-AC110_1489207_2.jpg)
LY4I4-AC50
Power/Signal Relay, 4PDT, Momentary, 2500mW (Coil), 10A (Contact), 24VDC (Contact), AC Input, AC/DC Output, Socket Mount
OMRON
![](http://pdffile.icpdf.com/pdf2/p00220/img/page/LY4N-D2-AC24_1279668_files/LY4N-D2-AC24_1279668_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00220/img/page/LY4N-D2-AC24_1279668_files/LY4N-D2-AC24_1279668_2.jpg)
LY4I4-AC6
Power/Signal Relay, 4PDT, Momentary, 2500mW (Coil), 10A (Contact), 24VDC (Contact), AC Input, AC/DC Output, Socket Mount
OMRON
![](http://pdffile.icpdf.com/pdf2/p00245/img/page/LY4I4N-AC110_1489207_files/LY4I4N-AC110_1489207_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00245/img/page/LY4I4N-AC110_1489207_files/LY4I4N-AC110_1489207_2.jpg)
LY4I4-DC110
Power/Signal Relay, 4PDT, Momentary, 0.016A (Coil), 110VDC (Coil), 1500mW (Coil), 10A (Contact), 24VDC (Contact), DC Input, AC/DC Output, Socket Mount,
OMRON
![](http://pdffile.icpdf.com/pdf2/p00245/img/page/LY4I4N-AC110_1489207_files/LY4I4N-AC110_1489207_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00245/img/page/LY4I4N-AC110_1489207_files/LY4I4N-AC110_1489207_2.jpg)
LY4I4-DC12
Power/Signal Relay, 4PDT, Momentary, 0.12A (Coil), 12VDC (Coil), 1500mW (Coil), 10A (Contact), 24VDC (Contact), DC Input, AC/DC Output, Socket Mount,
OMRON
©2020 ICPDF网 联系我们和版权申明