M165AW12D [OMRON]
Pushbutton Switch, SPDT, Momentary, 3A, 30VDC, Solder Terminal, Panel Mount;
| 型号： | M165AW12D |
| 厂家： | 
OMRON ELECTRONICS LLC |
| 描述： | Pushbutton Switch, SPDT, Momentary, 3A, 30VDC, Solder Terminal, Panel Mount 开关 光电二极管 |
| 文件： | 总22页 (文件大小：340K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Pushbutton Switches/Pilot Lights
A16/M16
Mounting Aperture of 16 mm
H Modular construction (Pushbutton +
Case + Lamp + Switch Unit)
H “Snap-in” switch unit for quick and easy,
tool-free assembly
H Wide range of switching capacity from
general to microload
H High reliability IP65 or IP40 models
H Short mounting depth, less than
28.5 mm below panel
c
H Terminal layout simplifies common
wiring
H UL and CSA approved, VDE (pending)
H Conforms to EN60943-5-1, IEC947-5-1
Ordering Information
J CONSTRUCTION
Flange Shape
Available Colors
Rectangular
(A16j-J)
Square
(A16j-A)
Round
(A16j-T)
•
For LED/incandescent
Red, green, yellow, white, blue
•
For non-Illuminated
Red, green, yellow, white, blue, black
(Actual color of yellow pushbuttons more
closely resembles amber than true yellow.)
Protective Case and Terminal Type
•
Protective Structure
IP40/Oil-resistant IP65
•
Terminal Type
Solder terminals
(tab terminals #110)
Lamp
•
•
LED
Incandescent lamp
Switch Unit Specifications
•
Ratings
125 VAC: 5 A
250 VAC: 3 A
30 VDC
3 A
Minimum applicable load: 1 mA at 5 VDC
2
A16/M16
A16/M16
Structure of Pushbutton
Lens
Legend plate
Dispersion plate
Reflective plunger
J MODELS
Item
Shape
Part number
Pushbutton Switches
Rectangular
A16-J
A165-J
Square
Round
A16-A
A165-A
A16-T
A165-T
Knob-type Selector Switches Rectangular
A165S-J (Non-illuminated)
A165W-J (Illuminated)
Square
Round
A165S-A (Non-illuminated)
A165W-A (Illuminated)
A165S-T (Non-illuminated)
A165W-T (Illuminated)
3
A16/M16
A16/M16
Item
Shape
Rectangular
Part number
A165K-J
Key-type Selector Switches
Square
A165K-A
A165K-T
Round
Pilot Lights
Rectangular
M16-J
M165-J
Square
Round
M16-A
M165-A
M16-T
M165-T
Emergency Stop Switches
A165E
Buzzers
M2BJ-B
M2BJ-BH
4
A16/M16
A16/M16
J PART NUMBER LEGEND A16 NON-ILLUMINATED PUSHBUTTONS
(COMPLETE ASSEMBLY)
A16j-- J
A16j-- A
A16j-- T
A16 Part number nomenclature
1 Enclosure Rating
1
2
3
4
5
A16j-jjjj
4 Operating Function
Code Description
Code Description
None IP40
M
A
Momentary
Alternate action
5
IP65 oil-resistant
5 Contact form and terminal type
2 Shape
Code Shape
Code
Contact form
Terminal
Description
1
2
1C SPDT (See Note)
2C DPDT (See Note)
Solder terminal
Solder terminal
T
A
J
Round
Extended
Square
2 directions, guarded
2 directions, guarded
Rectangular
Note: SPDT: Single Pole, Double Throw
DPDT: Double Pole, Double Throw
3 Operator Color
Code Description
R
Y
Red
Yellow
G
W
A
Green
White
Blue
B
Black (for non-illuminated only)
(Actual color of yellow pushbuttons more
closely resembles amber than true yellow.)
5
A16/M16
A16/M16
J PART NUMBERS: NON-ILLUMINATED PUSHBUTTON SWITCHES (COMPLETE ASSEMBLY)
Part number
Description
Shape
Round
Contact
SPDT
Momentary
Enclosed (IP40) Oiltight (IP65)
Alternate action (See Note 2.)
Enclosed (IP40) Oiltight (IP65)
Non--Illuminated
Standard Button
A16--TjM--1
A16--TjM--2
A16--AjM--1
A16--AjM--2
A16--JjM--1
A16--JjM--2
A165--TjM--1
A165--TjM--2
A165--AjM--1
A165--AjM--2
A165--JjM--1
A165--JjM--2
A16--TjA--1
A16--TjA--2
A16--AjA--1
A16--AjA--2
A16--JjA--1
A16--JjA--2
A165--TjA--1
A165--TjA--2
A165--AjA--1
A165--AjA--2
A165--JjA--1
A165--JjA--2
DPDT
SPDT
DPDT
SPDT
DPDT
Square
Rectangular
Rectangular
Rectangular
Note: 1. To complete the part number, in place of the j symbol, specify the color code from the table below.
2. Also described as Push-on / Push-off operation.
Operator Color Codes
(Actual color of yellow pushbuttons more closely resembles amber than true yellow.)
Code
R
Color
Red
Y
Yellow
Green
White
Blue
G
W
A
B
Black
Note: Also described as Push-on/Push-off operation.
6
A16/M16
A16/M16
J PART NUMBER LEGEND M16 ASSEMBLED PILOT LIGHTS
M16j-- J
M16j-- A
M16j-- T
M16 Part number nomenclature
1
2
3
4
M16j-jjj
3 Operator Color
1 Enclosure Rating
Code Description
None IP40
Code Description
R
Y
Red
Yellow
Green
White
Blue
5
IP65 oil-resistant
G
W
A
(Actual color of yellow pushbuttons more
closely resembles amber than true yellow.)
2 Shape
Code Shape
Description
4 Source of light
T
A
J
Round
Extended
Code
Source
Voltage
Square
2 directions, guarded
2 directions, guarded
Operating
AC/DC5V
Rated
Rectangular
5
Incandescent lamp
Incandescent lamp
Incandescent lamp
LED
AC/DC6V
AC/DC14V
AC/DC24V
DC5V
12
AC/DC12V
AC/DC24V
DC5V
24
5D
12D
24D
LED
DC12V
DC12V
LED
DC24V
DC24V
Transformer
Code
Voltage
Operating
Rated
T1
T2
AC100V
AC200V
AC110V
AC220V
7
A16/M16
A16/M16
J PART NUMBERS: PILOT LIGHTS (COMPLETE ASSEMBLY)
Part number
IP40
Style
Type
Voltage
IP65 Oiltight
Round
Full voltage LED (DC) 5 VDC
M16--Tj-- 5 D
M16--Tj--12D
M16--Tj--24D
M16--Tj-- 5
M165--Tj-- 5 D
M165--Tj--12D
M165--Tj--24D
M165--Tj-- 5
12 VDC
24 VDC
Full voltage
5 V AC/DC
incandescent lamp
(AC/DC)
12 V AC/DC
24 V AC/DC
110 VAC
M16--Tj-- 1 2
M16--Tj-- 2 4
M16--Tj-- T 1
M16--Tj-- T 2
M16--Aj-- 5 D
M16--Aj--12D
M16--Aj--24D
M16--Aj-- 5
M16--Aj-- 1 2
M16--Aj-- 2 4
M16--Aj-- T 1
M16--Aj-- T 2
M16--Jj-- 5 D
M16--Jj--12D
M16--Jj--24D
M16--Jj-- 5
M165--Tj-- 1 2
M165--Tj-- 2 4
M165--Tj-- T 1
M165--Tj-- T 2
M165--Aj-- 5 D
M165--Aj--12D
M165--Aj--24D
M165--Aj-- 5
M165--Aj-- 1 2
M165--Aj-- 2 4
M165--Aj-- T 1
M165--Aj-- T 2
M165--Jj-- 5 D
M165--Jj--12D
M165--Jj--24D
M165--Jj-- 5
Transformer 24 V
secondary
220 VAC
Square
Full voltage LED (DC) 5 VDC
12 VDC
24 VDC
Full voltage
5 V AC/DC
incandescent lamp
(AC/DC)
12 V AC/DC
24 V AC/DC
110 VAC
Transformer 24 V
secondary
220 VAC
Rectangular
Full voltage LED (DC) 5 VDC
12 VDC
24 VDC
Full voltage
5 V AC/DC
incandescent lamp
(AC/DC)
12 V AC/DC
24 V AC/DC
110 VAC
M16--Jj-- 1 2
M16--Jj-- 2 4
M16--Jj-- T 1
M16--Jj-- T 2
M165--Jj-- 1 2
M165--Jj-- 2 4
M165--Jj-- T 1
M165--Jj-- T 2
Transformer 24 V
secondary
220 VAC
Note: To complete part number, in place of the j symbol, specify the color code from the Lens Color Code table below.
Lens Color Codes
(Actual color of yellow lens more closely resembles amber than true yellow.)
Code
R
Color
Red
Y
G
W
A
Yellow
Green
White
Blue
8
A16/M16
A16/M16
J PART NUMBER LEGEND A16 ILLUMINATED PUSHBUTTONS (COMPLETE ASSEMBLY)
Part Number Nomenclature
A16
1
2
3
4
5
6
j j j j j
j
A 1 6 L -
-
-
1 Protective Code
5 Source of light
Code
Blank
5
Description
IP40
Code
Source
Voltage
Operating
AC/DC5V
Rated
IP65
5
Incandescent lamp
Incandescent lamp
Incandescent lamp
LED
AC/DC6V
AC/DC14V
AC/DC24V
DC5V
12
AC/DC12V
AC/DC24V
DC5V
24
2 Shape of Pushbutton unit
5D
12D
24D
Code
Shape
LED
DC12V
DC12V
T
A
J
Round
LED
DC24V
DC24V
Square
Transformer
Rectangular
Code
Voltage
Operating
Rated
T1
T2
AC100V
AC200V
AC110V
AC220V
3 Operator Color
Code
Color
R
Red
G
Green
Yellow
White
Blue
Y
6 Contact form and terminal type
W
A
Code
Contact form
Terminal
1
2
1C SPDT (See Note)
2C DPDT (See Note)
Solder terminal
Solder terminal
(Actual color of yellow pushbuttons more
closely resembles amber than true yellow.)
Note: SPDT: Single Pole, Double Throw
DPDT: Double Pole, Double Throw
4 Operating Function
Code
M
Function
Momentary
Alternate action
A
9
A16/M16
A16/M16
J PART NUMBERS: A16 ILLUMINATED PUSHBUTTONS (COMPLETE ASSEMBLY)
Part number
Momentary
Oiltight (IP65)
Alternate action
Oiltight (IP65)
Style
Illumination
method
Voltage
Contact
SPDT
Enclosed (IP40)
A16L-TjM-5D-1
A16L-TjM-12D -1
A16L-TjM-24D -1
A16L-TjM-5-1
A16L-TjM-12-1
A16L-TjM-24-1
A16L-TjM-5D-2
A16L-TjM-12D -2
A16L-TjM-24D -2
A16L-TjM-5-2
A16L-TjM-12-2
A16L-TjM-24-2
A16L-AjM-5D-1
A16L-AjM-12D -1
A16L-AjM-24D -1
A16L-AjM-5-1
A16L-AjM-12-1
A16L-AjM-24-1
A16L-AjM-5D-2
A16L-AjM-12D -2
A16L-AjM-24D -2
A16L-AjM-5-2
A16L-AjM-12-2
A16L-AjM-24-2
A16L-JjM-5D-1
A16L-JjM-12D -1
A16L-JjM-24D -1
A16L-JjM-5-1
Enclosed (IP40)
A16L-TjA-5D-1
A16L-TjA-12D -1
A16L-TjA-24D -1
A16L-TjA-5-1
A16L-TjA-12-1
A16L-TjA-24-1
A16L-TjA-5D-2
A16L-TjA-12D -2
A16L-TjA-24D -2
A16L-TjA-5-2
A16L-TjA-12-2
A16L-TjA-24-2
A16L-AjA-5D-1
A16L-AjA-12D -1
A16L-AjA-24D -1
A16L-AjA-5-1
A16L-AjA-12-1
A16L-AjA-24-1
A16L-AjA-5D-2
A16L-AjA-12D -2
A16L-AjA-24D -2
A16L-AjA-5-2
A16L-AjA-12-2
A16L-AjA-24-2
A16L-JjA-5D-1
A16L-JjA-12D -1
A16L-JjA-24D -1
A16L-JjA-5-1
Round
LED (DC)
5V
12V
24V
A165L-TjM-5D-1
A165L-TjM-12D -1
A165L-TjM-24D -1
A165L-TjM-5-1
A165L-TjM-12-1
A165L-TjM-24-1
A165L-TjM-5D-2
A165L-TjM-12D -2
A165L-TjM-24D -2
A165L-TjM-5-2
A165L-TjM-12-2
A165L-TjM-24-2
A165L-AjM-5D-1
A165L-AjM-12D -1
A165L-AjM-24D -1
A165L-AjM-5-1
A165L-AjM-12-1
A165L-AjM-24-1
A165L-AjM-5D-2
A165L-AjM-12D -2
A165L-AjM-24D -2
A165L-AjM-5-2
A165L-AjM-12-2
A165L-AjM-24-2
A165L-JjM-5D-1
A165L-JjM-12D -1
A165L-JjM-24D -1
A165L-JjM-5-1
A165L-TjA-5D-1
A165L-TjA-12D -1
A165L-TjA-24D -1
A165L-TjA-5-1
A165L-TjA-12-1
A165L-TjA-24-1
A165L-TjA-5D-2
A165L-TjA-12D -2
A165L-TjA-24D -2
A165L-TjA-5-2
A165L-TjA-12-2
A165L-TjA-24-2
A165L-AjA-5D-1
A165L-AjA-12D -1
A165L-AjA-24D -1
A165L-AjA-5-1
A165L-AjA-12-1
A165L-AjA-24-1
A165L-AjA-5D-2
A165L-AjA-12D -2
A165L-AjA-24D -2
A165L-AjA-5-2
A165L-AjA-12-2
A165L-AjA-24-2
A165L-JjA-5D-1
A165L-JjA-12D -1
A165L-JjA-24D -1
A165L-JjA-5-1
Incandescent 5V
lamp
12V
24V
5V
12V
24V
(AC/DC)
LED (DC)
DPDT
SPDT
DPDT
SPDT
DPDT
Incandescent 5V
lamp
12V
24V
5V
12V
24V
5V
(AC/DC)
Square
LED (DC)
Incandescent
lamp
12V
24V
5V
12V
24V
5V
12V
24V
5V
12V
24V
(AC/DC)
LED (DC)
Incandescent
lamp
(AC/DC)
Rectangular
LED (DC)
Incandescent 5V
lamp
12V
24V
5V
12V
24V
A16L-JjM-12-1
A16L-JjM-24-1
A16L-JjM-5D-2
A16L-JjM-12D -2
A16L-JjM-24D -2
A16L-JjM-5-2
A165L-JjM-12-1
A165L-JjM-24-1
A165L-JjM-5D-2
A165L-JjM-12D -2
A165L-JjM-24D -2
A165L-JjM-5-2
A16L-JjA-12-1
A16L-JjA-24-1
A16L-JjA-5D-2
A16L-JjA-12D -2
A16L-JjA-24D -2
A16L-JjA-5-2
A165L-JjA-12-1
A165L-JjA-24-1
A165L-JjA-5D-2
A165L-JjA-12D -2
A165L-JjA-24D -2
A165L-JjA-5-2
(AC/DC)
LED (DC)
Incandescent 5V
lamp
12V
24V
A16L-JjM-12-2
A16L-JjM-24-2
A165L-JjM-12-2
A165L-JjM-24-2
A16L-JjA-12-2
A16L-JjA-24-2
A165L-JjA-12-2
A165L-JjA-24-2
(AC/DC)
Note: To complete the part number, in place of the j symbol, specify the color code from the Operator Color Code table below.
Operator Color Codes
(Actual color of yellow pushbuttons more closely resembles amber than true yellow.)
Code
R
Color
Red
Y
G
W
A
Yellow
Green
White
Blue
Note: 1. To order Illuminated pushbutton with 110 VAC transformer, replace the voltage code (5, 12, 24, 5D, 12D, 24D) with T1 for 110V
or T2 for 220V. The secondary voltage of the transformer is always 24V.
10
A16/M16
A16/M16
J ACCESSORIES (ORDER SEPARATELY)
Name
Switch guards
Shape
Classification
Rectangular
Remarks
Part number
A16ZJ-5050
Cannot be used with the Dust
.
Cover
Square and round
A16ZA-5050
Dust covers
Panel plugs
Rectangular
Square
Cannot be used with the Switch
Cover.
A3BJ-5060
A3BA-5060
A3BT-5060
A3BJ-3003
A3BA-3003
A3BT-3003
Round
Rectangular
Square
Round
Used for covering the panel
cutouts for future panel expansion.
J REPLACEMENTS
Name
Legend panels
Shape
Classification
Rectangular IP40
Remarks
Part number
A16ZJ-5204
A16ZJ-5202
A16ZJ-5204
A16ZJ-5203
A16ZA-5204
A16ZA-5202
A16ZA-5204
A16ZA-5203
A16ZT-5204
Opaque
Transparent
Oil-resistant Opaque
A single Legend Panel
(transparent) is included with a
standard model.
The Opaque Legend Panel can
be used with the IP40 and
oil-resistant IP65.
IP65
Transparent
Opaque
Transparent
Square
Round
IP40
Oil-resistant Opaque
IP65
Transparent
IP40
Opaque
Transparent
A16ZT-5202
Oil-resistant Opaque
IP65
A16ZT-5204
A16ZT-5203
Transparent
Color caps
(for IP40)
LED indicator/incandescent White
Insert one of the following letters
A16Zj-5001W
A16Zj-5001R
A16Zj-5001Y
A16Zj-5001GY
A16Zj-5001A
A16Zj-5001G
A16Zj-5011B
A16Zj-5101W
A16Zj-5101R
A16Zj-5101Y
A16Zj-5101GY
A16Zj-5101A
A16Zj-5101G
A16Zj-5111B
lamp/non-illuminated
into the box (j).
Red
Yellow
J: Rectangular
A: Square
T: Round
The Color Cap is usually
supplied. Replace the Cap if the
color is to be changed.
Rectangular
LED indicator
Green
Incandescent lamp/non-illu- Blue
minated
Green
Black
Square
Round
Non-illuminated
When using an LED indicator, be
sure to use a Color Cap that
matches the luminescent color of
the LED.
Color caps
(for oil-resistant
IP65)
LED indicator/incandescent White
lamp/
Red
non-illuminated
Yellow
The materials used for the IP40
and oil-resistant IP65 are
LED indicator
Green
Incandescent lamp/non-illu- Blue
minated
different so be sure to use a
Color Cap that matches the
specifications of the Switch.
Green
Black
Non-illuminated
11
A16/M16
A16/M16
J TOOLS
Name
Shape
Applicable types
Remarks
Part
number
Pushbutton Knob-type Key-type
E-Stop
Switch
Indicator
Yes
Switch
Selector
Switch
Selector
Switch
Pushbutton
switch
Yes
No
No
No
Convenient for
extracting
A3PJ-5080
A3B-3004
extractor
Pushbutton
Switches
Screw
fitting
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Convenient for
ganged installation.
Tighten to a torque
of 0.39 N • m (5 kgf
• cm) min.
Lamp unit
extractor
Yes
Yes
Yes
Convenient for
extracting the
Switch Unit and
Lamps.
A16Z-5080
Specifications
J CHARACTERISTICS
Item
Allowable operating
frequency
Mechanical
Electrical
Momentary operation: 120 operations/min max.
Alternating operation: 60 operations/min max. (See Note 1)
20 operations/min max.
Insulation resistance
Dielectric strength
100 MΩ min. (at 500 VDC)
1,000 VAC, 50/60 Hz for 1 min between terminals of same polarity
2,000 VAC, 50/60 Hz for 1 min between terminals of different polarity and also between each
terminal and ground
1,000 VAC, 50/60 Hz for 1 min between lamp terminals (See Note 2)
Vibration resistance
Shock resistance
Malfunction
Mechanical
Malfunction
Mechanical
10 to 55 Hz, 1.5-mm double amplitude (malfunction within 1 ms)
2
500 m/s (50G)
2
150 m/s (15G) max. (malfunction within 1 ms)
Life expectancy
Momentary operation: 2,000,000 operations min.
Alternating operation: 200,000 operations min.
Electrical
100,000 operations min.
Ambient temperature
Ambient humidity
Operating: --10°C to 55°C (14°F to 131°F) with no icing or condensation
Storage:
--25°C to 65°C (-13°F to 149°F) with no icing or condensation
Operating: 35% to 85%
Electric shock protection class
Degree of contamination
Weight
Class II
3 (IEC947-5-1)
Approx. 10 g (0.35 oz) in the case of a Illuminated DPDT switch with solder terminals
Note: 1. Set and reset constitute one operation.
2. With LED and incandescent lamp not mounted.
J APPROVED STANDARDS
Recognized organization
UL, cUL (See Note)
ASTA
Standards
UL508
File No.
E41515
—
EN60947-5-1
Note: UL: CSA C22 No. 14
12
A16/M16
A16/M16
J RATINGS
AC resistive load (AC15)
3 A, 250 VAC
5 A, 125 VAC
DC resistive load (DC13)
3 A, 30 VDC
Minimum applicable load: 1 mA at 5 VDC
Rated values are obtained from tests conducted under the following conditions according to JIS C4505 and C4520.
1. Load: Resistive load
2. Mounting conditions: No vibration and no shock
3. Temperature: 20°±2°C
4. Operating frequency: 20 operations/min
Contact
Name
SPDT
Contact
LED
Rated voltage
5 VDC
Rated current
30 mA
Operating voltage
5 VDC±5%
Internal limiting resistor
33 Ω
12 VDC
24 VDC
15 mA
10 mA
12 VDC±5%
24 VDC±5%
270 Ω
1600 Ω
Incandescent Lamp
Rated voltage
6 VAC/DC
Rated current
Operating voltage
5 VAC/DC
60 mA
40 mA
24 mA
14 VAC/DC
28 VAC/DC
12 VAC/DC
24 VAC/DC
J OPERATING CHARACTERISTICS
Type
Pushbutton Switch
IP40
SPDT
Oil-resistant IP65
SPDT
DPDT
DPDT
Operating force (OF) max.
Releasing force (RF) min.
Total travel (TT)
2.45 N (250 gf)
0.29 N (30 gf)
Approx. 3 mm
2.5 mm
4.41 N (450 gf)
2.94 N (300 gf)
4.91 N (500 gf)
Pretravel (PT) max.
Lock stroke (LTA) min. (See Note)
0.5 mm
Note: Lock stroke is only for alternating operation.
13
A16/M16
A16/M16
Dimensions
Unit: mm (inch)
J ILLUMINATED/NON-ILLUMINATED PUSHBUTTON SWITCHES WITHOUT TRANSFORMER
The lamp terminal is also provided with non-Illuminated models.
Solder terminals and tab terminals (#110) can be both used with Illuminated and Non-Illuminated Pushbutton Switches.
28.5
Rectangular
A16j-J
9.3
(1.12)
(0.37)
Panel Cutouts
Solder terminals (tab terminals #110)
+0.2
16
dia.
0
Lamp terminal
+0.008
24 min.
)
(0.63
0
(0.94)
18
(0.71)
19 min.
(0.75)
Lock ring
Mounting nut
Lamp terminals
18
15.8
15.1
(0.71)
(0.62)
(0.59)
21
(0.83)
Packing (t0.5)
(for oil-resistant IP65 only)
24
(0.94)
Square
28.5
9.3
A16-A
(1.12)
(0.37)
Sold
Lamp terminals
+0.2
16
dia.
0
18
+0.008
19 min.
(0.75)
(0.63
)
(0.71)
0
19 min.
(0.75)
Lock ring
Mounting nut
Lamp terminals
18
15.8
(0.62)
15.1
(0.71)
(0.59)
15.1
Packing (t0.5)
(for oil-resistant IP65 only)
(0.59)
18
(0.71)
28.5
Round
A16j-T
9.3
(1.12)
(0.37)
Solder ter
Lamp terminals
+0.2
16
dia.
0
18
18
+0.008
14.6
(0.71)
(0.63
)
19 min.
(0.75)
0
(0.71)
(0.57)
19 min.
(0.75)
Lock ring
Mounting nut
Lamp terminals
18
15.8
(0.71)
(0.62)
18
(0.71)
Packing (t0.5)
(for oil-resistant IP65 only)
Note: 1. Make sure the thickness of the mounting panel is between 0.5 and 3.2 mm. If, however, a Switch Guard or Dust Cover is
used, the thickness of the mounting panel must be between 0.5 and 2 mm.
2. If a panel is to be finished with coating, etc., make sure that the panel meets the specified dimensions after coating.
14
A16/M16
A16/M16
J INDICATORS WITHOUT TRANSFORMER
Rectangular
Panel cutouts
(Top View)
Packing (t0.5)
M16-J
Solder t
+0.2
16
dia.
0
24 min.
(0.94)
+0.008
(0.63
)
14.6 dia.
0
18 dia.
(0.71)
19 min.
(0.75)
Lamp terminal
9.3
(0.37)
28.5
(1.12)
4.85
(0.19)
15.1
(0.59)
18
(0.71)
21
(0.83)
24
Mounting nut
Lock ring
(0.95)
Square
M16-A
Panel cutouts
(Top View)
Packing (t0.5)
Solder te
+0.2
16
dia.
0
+0.008
19 min.
(0.75)
(0.63
)
0
14.6 dia.
18 dia.
(0.71)
19 min.
(0.75)
Lamp terminal
9.3
(0.37)
28.5
(1.12)
4.85
(0.19)
18
(0.71)
15.1
(0.59)
15.1
(0.59)
18
Mounting nut
Lock ring
(0.71)
Round
M16-T
Panel cutouts
(Top View)
Packing (t0.5)
Solder terminals (tab terminals #110)
+0.2
16
dia.
0
+0.008
19 min.
(0.75)
(0.63
)
0
18
14.6 dia.
(0.57)
(0.71) 14.6
(0.57)
18 dia.
(0.71)
19 min.
(0.75)
Lamp terminal
9.3
(0.37)
28.5
(1.12)
4.85
(0.19)
18
(0.71)
18
(0.71)
Mounting nut
Lock ring
Note: 1. Make sure the thickness of the mounting panel is between 0.5 and 3.2 mm. If, however, a Switch Guard or Dust Cover is used,
the thickness of the mounting panel must be between 0.5 and 2 mm.
2. If a panel is to be finished with coating, etc., make sure that the panel meets the specified dimensions after coating.
15
A16/M16
A16/M16
Unit: mm (inch)
J LAMPS
LED
Incandescent Lamp
A16-5/-12/-24
A16-5Dj/-12Dj/-24Dj
13 max.
(0.51)
13 max.
(0.51)
4
4
Cathode (- )
0.25
0.5 dia.
2.54
(0.10)
2.54
(0.10)
6 dia.
(0.24)
6 dia.
Anode (+)
(0.24)
Same as
emitting
color
J TERMINAL ARRANGEMENT
Non-Illuminated Pushbutton Switches are also provided with lamp terminals.
SPDT Switches
DPDT Switches
Illuminated type
Illuminated type
TnArrngment
nt
7.4
7.4
(0.29)
(0.29)
12.2
(0.48)
18
(0.71)
12.2
(0.48)
Lamp terminal
Lamp terminal
18
(0.71)
Note: The L+ is not shown
on the Switch Unit.
Note: The L+ is not shown
on the Switch Unit.
4
(0.16)
Pilot lights
10.8
Terminal Arrangement
(Bottom View)
(0.43)
Dimensions of
Terminal Holes
7.4
(0.29)
Lamp terminal
Note: The L+ is not shown
on the Switch Unit.
14.6 dia.
(0.57)
18 dia.
(0.71)
16
A16/M16
A16/M16
J ACCESSORIES, TOOLS, AND COMPONENTS
10
Pushbutton
20
(0.39)
(0.79)
swit
A3P
15
(0.59)
50
(1.97)
25
(0.98)
Legend Panels
12.9 dia
(0.51)
A16ZJ-520j
A16ZT-520j
A16ZA-520j
12.9
18.9
(0.51)
(0.74)
18.9
12.9
13.4 dia
(0.74)
(0.51)
(0.53)
0.6
0.6
0.6
(0.02)
(0.02)
(0.02)
Note: 1. The panel is 0.6 mm thick.
2. The panel is made of the materials listed in the following table.
Degree of protection
Materials
Color
Opaque
IP40
IP65
IP40
IP65
Polyacrylate resin
Polycarbonate resin
Polyacrylate resin
Transparent
Note:
The standard model is transparent.
Screw Fitting
A
60
2
(2.36)
(0.08)
18 dia.
(0.71)
Panel Plugs (Black Resin)
Select the Plug that fits the panel design and mount from the front of the Panel. Panel cutouts are the same as those for Switches.
Square
A3BA-3003
Rectangular
A3BJ-3003
Round
A3BT-3003
24
18
(0.94)
(0.71)
18
(0.71)
18 (0.71)
18 (0.71)
17
A16/M16
A16/M16
Lock Fitting
Rough surface
15.8±0.1 dia.
(0.62±0.004)
Rough surface
17.9±0.1
12x12
(0.70±0.004)
(0.47 x 0.47)
+0.2
2
0
0
15
dia.
-0.1
0
t=1
17.9±0.1
(59
dia.)
-0.004
(0.70±0.004)
Lamp unit extractor
A16Z-5080
80
(3.15)
8
20
10
(0.39)
18
A16/M16
A16/M16
Dimensions When Mounting Accessories
Unit: mm (inch)
J SWITCH GUARDS
Rectangular
A16ZJ-5050
24
Torsion spring
(0.94)
18.1
23.5
(0.71)
(0.93)
10.5
(0.41)
Holder (black)
Guard (transparent)
24.5 min.
+0.2
(0.96)
16
dia.
0
21.1
13
(0.51)
28.5
(1.12)
28 min.
(1.10)
e illustration shows a case where 4.5 mm is provided for the
x.” If no clearance is required for the “x” section, the vertical
dimension can be as small as 24 mm.
stance according to operating conditions.
Square
A16ZA-5050
18
(0.71)
Torsion spring
23.5
(0.93)
10.5
18.1
(0.71)
(0.41)
Holder (black)
Guard (transparent)
19 min.
(0.75)
+0.2
0
16
dia.
21.1
28.5
(1.12)
13
(0.51)
28 min.
(1.10)
llustration shows a case where 4.5 mm is provided for the
” If no clearance is required for the “x” section, the vertical
mension can be as small as 24 mm.
ance according to operating conditions.
19
A16/M16
A16/M16
J DUST COVERS
+0.2
Rectangular
A3BJ-5060
16
dia.
Cover A (transparent)
Cover B (black)
0
Panel Cutouts
+0.008
(0.63
)
0
31 min.
(1.22)
25 min.
(0.98)
24
(0.94)
21.1
(0.83)
30
13.8
(0.54)
28.5
(1.18)
(1.12)
Square
A3BA-5060
Cover A (transparent)
Cover B (black)
+0.2
16
dia.
0
+0.008
(0.63
)
25 min.
(0.98)
0
25 min.
(0.98)
24
(0.94)
21.1
(0.83)
24
13.8
(0.54)
(0.94)
28.5
(1.12)
Round
A16ZT-5050
Panel Cutouts
Cover A (transparent)
Cover B (black)
+0.2
16
dia.
0
25 min.
(0.98)
+0.008
(0.63
)
0
25 min.
(0.98)
21.1
24 dia.
(0.94)
(0.83)
28.5
13.8
(1.12)
(0.54)
20
A16/M16
A16/M16
Installation
J MOUNTING
J REPLACEMENT PARTS
After mounting the Pushbutton Unit to the panel, snap in the
Socket Unit from the back of the panel.
Removal and installation of the Operating Part
1. Remove the operating part as shown in the following
diagram. If the operating part cannot be removed by hand,
use the A3PJ-5080 Extractor.
Panel mounting
Insert the Pushbutton Unit into the front of the panel, and fix the
lock ring and mounting nut from the terminal side.
Make sure that the lock ring is aligned with the thread of the case
and the edge of the lock ring is touching the panel.
Tighten the mounting nuts to a torque of 0.20 to 0.39 N • m (3 to
5 kgf • cm).
The maximum tightening torque is 0.39 N • m (5 kgf • cm).
Operating section
g nut
C
Thread
2. To attach the operating part, push until it clicks into place.
J REMOVING THE LAMP
Removing from the Operating Part End
Switch Mounting
Snap on the Switch Unit to the Pushbutton Unit.
Make sure the the Switch Unit is in the proper orientation when
snapping on to the Pushbutton Unit.
amp with the
0 Extractor and
pull to remove.
Removing from the Switch Unit End
The Lamp can be removed by hand once the Switch is removed
using the A16Z-5080 Extractor.
J INSTALLING THE LAMP
When mounting the Lamp, make sure it is facing the direction
shown in the following diagram. Insert the Lamp while matching
the protruding part of the Lamp and the small guides on the outer
surface of the case.
J SWITCH REMOVAL
Grip the part between the Switch holder of the case and the
Switch Unit using the A16Z-5080 Extractor, and pull to remove
the Switch Unit.
Protruding part
The Lamp can be mounted from the operating part end by using
the A16Z-5080 Extractor. The lamp can be mounted by following
the opposite procedure for removing the Lamp.
21
A16/M16
A16/M16
Precautions
!
WARNING
Do not apply a voltage between the incandescent lamp and
the terminal that is greater than the rated voltage. If the incan-
descent lamp is broken, the operating part may pop out.
Always turn OFF the power and wait for 10 minutes before
replacing the incandescent lamp. If the lamp is replaced
immediately after the power is turned OFF, the remaining heat
may cause burns.
Area of use
General-purpose load area
J CORRECT USE
Mounting
Microload area
Invalid
area
Always make sure that the power is turned OFF before mounting,
removing, or wiring the Switch, or performing maintenance.
Current (mA)
Do not tighten the mounting nut more than necessary using tools
such as pointed-nose pliers. Doing so will damage the mounting
nut. The tightening torque is 0.20 to 0.39 N • m (3 to 5 kgf • cm).
LEDs
The LED current-limiting resistor is built-in, so internal resistance
is not required.
Wiring
Rated voltage
5 VDC
Internal limiting resistor
33 Ω
Solder terminals and quick-connect terminals (#110) are
commonly used for terminals.
12 VDC
24 VDC
270 Ω
1600 Ω
Be sure to use electrical wires that are a size appropriate for the
applied voltage and carry current (conductor size is 0.5 to 0.75
2
mm ). Perform soldering according to the conditions provided
below. If the soldering is not properly performed, the lead wires
will become detached, resulting in short-circuits.
Others
The oil-resistant IP65 uses NBR rubber and is resistant to
general cutting oil and cooling oil. Some particular oils cannot be
used with the oil-resistant IP65, however, so contact your
OMRON representative for details.
1. Hand soldering: 30 W, within 5 s
2. Dip soldering: 240°C, within 3 s
Wait for one minute after soldering before exerting any external
force on the solder.
If the panel is to be finished with coating, etc., make sure that the
panel meets the specified dimensions after the coating.
Use non-corrosive resin fluid as the flux.
Do not subject the Switch to extreme shock or vibration. Doing so
will cause malfunctions and damage to the Switch.
Make sure that the electric cord is wired so that it does not touch
the Unit. If the electric cord will touch the Unit, then electric wires
with a heat resistance of 100°C min. must be used.
Do not let sharp objects come into contact with the Switches that
are made of resin. Doing so will damage the Switches, causing
scratches on the outside of the operating parts, and malfunction.
After wiring the Switch, maintain an appropriate clearance and
creepage distance.
When handling the Switches, do not throw or drop them.
Operating Environment
The IP65 model is designed with a protective structure so that it
will not sustain damage if it is subjected to water from any
direction to the front of the panel.
Do not allow the Switch
to drop and hit the
ground.
Using the Microload
Insert a contact protection circuit, if necessary, to prevent the
reduction of life expectancy due to extreme wear on the contacts
caused by loads where inrush current occurs when the contact is
opened and closed.
The A16 allows both a general-purpose load (125 V at 5A, 250 V
at 3 A) and a microload. If a general-purpose load is applied,
however, the microload area cannot be used. If the microload
area is used with a general-purpose load, the contact surface will
become rough, and the opening and closing of the contact for a
microload may become unreliable.
Do not place or drop
heavy objects on the
Switch.
The minimum applicable load is the N-level reference value. This
value indicates the malfunction reference level for the reliability
level of 60% (λ 60) (conforming to JIS C5003).
-4
The equation, λ 60 = 0.5 x 10 /time indicates that the estimated
Do not operate the Switch
with hard or sharp objects.
malfunction rate is less than 1/2,000,000 with a reliability level of
60%.
Hammer
Screwdriver
22
A16/M16
A16/M16
NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4.
R
OMRON ON--LINE
OMRON ELECTRONICS LLC
One East Commerce Drive
Schaumburg, IL 60173
OMRON CANADA, INC.
885 Milner Avenue
Global -- http://www.omron.com
USA -- http://www.omron.com/oei
Canada -- http://www.omron.com/oci
Scarborough, Ontario M1B 5V8
1-800-55-OMRON
416-286-6465
Cat. No. CEDSAX4
11/01
Specifications subject to change without notice.
Printed in U.S.A.
相关型号：
M165FANFREQ
HCMOS/TTL Output Clock Oscillator, 1.5MHz Min, 50MHz Max, ROHS COMPLIANT, CERAMIC, LEADLESS PACKAGE-4
MTRONPTI
©2020 ICPDF网 联系我们和版权申明