S82J-01024D [OMRON]
Compact and Economical Switch mode Power Supplies with Capacities Up to 600W; 紧凑型和经济型开关电源容量高达600W型号: | S82J-01024D |
厂家: | OMRON ELECTRONICS LLC |
描述: | Compact and Economical Switch mode Power Supplies with Capacities Up to 600W |
文件: | 总20页 (文件大小:366K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SSwi8tch2moJde Power Supply
Compact and Economical Switch mode Power Supplies with Capacities Up to 600 W
DIN Track Mounting Bracket Type Now Available
• Power range from 10 W up to 600 W.
• Output Voltages: 5 V, 12 V, 15 V, or 24 V.
• Mounting bracket provided for mounting to control panels.
• Maintenance-free up to 300 W due to natural ventilation.
• Protection-ON alarm indicator shows valuable protection functions in action (300-/600-W models).
• Conforms to EMC standards: EN50081-2 and EN50082-2.
• With an external filter, achieves conformance to EN50081-1 for universal usage on EMI (300-/600-W models).
• Finger protection terminal block to meet VDE0106/P100
• Class 2 approved 10-W, 25-W (except for 5-V output), and 50-W (only for 24-V output) models.
• UL508 approved. All models can be used at full load in UL508A industrial control panel applications.
• Approved by UL/CSA standards, EN60950, and EN50178 (VDE0160).
• Six-language instruction manual provided. (English, French, German, Italian, Spanish, and Japanese)
S82J
Covered Type
Enclosure Type
Open-frame Type
<10 W to 150 W>
<10 W to 150 W>
<300/600 W>
• 100 or 200 VAC (selectable)
•
100 to 240-VAC input
100 or 200 VAC (selected automatically)
(100-W 5-/12-/15-V output, 150-W models)
•
100 to 240-VAC input
100 or 200 VAC (selected automatically)
(100-W 5-/12-/15-V output, 150-W models)
•
•
Model Number Structure
I Model Number Legend
S82J -
1
2
3
4
1. Power Ratings
010: 10 W
2. Output Voltage
3. Configuration
05:
12:
15:
24:
5 V
A:
B:
C:
D:
E:
F:
N:
Open-frame type, front terminals
Open-frame type, top terminals
Open-frame type, connector
Covered type, front terminals
Covered type, top terminals
Covered type, connector
025: 25 W
12 V
15 V
24 V
050: 50 W
100: 100 W
150: 150 W
300: 300 W
600: 600 W
Without Mounting Bracket
None: Enclosure type, front terminals with
Mounting Bracket
4. Mounting Bracket
None: Front-mounting Bracket Type
D:
DIN Track Mounting Bracket Type
Switch mode Power Supply S82J
L-79
Ordering Information
I Front-mounting Bracket Type
Configuration
Input Voltage
Power
ratings
Output
voltage
Output
current
Front terminals
Top terminals
Connector
Open-frame type 100 to 240 VAC 10 W
5 V
2 A
S82J-01005A
S82J-01012A
S82J-01015A
S82J-01024A
S82J-02505A
S82J-02512A
S82J-02515A
S82J-02524A
S82J-05005A
S82J-05012A
S82J-05024A
S82J-10005A
S82J-10012A
S82J-10015A
S82J-10024A
S82J-15024A
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
12 V
15 V
24 V
5 V
1 A
0.7 A
0.5 A
5 A
25 W
50 W
12 V
15 V
24 V
5 V
2.1 A
1.7 A
1.1 A
10 A
4.2 A
2.1 A
20 A
8.5 A
7 A
12 V
24 V
5 V
100 or 200 VAC 100 W
(selected
automatically)
S82J-10005B
S82J-10012B
S82J-10015B
---
S82J-10005C
S82J-10012C
S82J-10015C
---
12 V
15 V
24 V
24 V
100 to 240 VAC
4.5 A
6.5 A
100 or 200 VAC 150 W
(selected
S82J-15024B
S82J-15024C
automatically)
Covered type
100 to 240 VAC 10 W
5 V
2 A
S82J-01005D
S82J-01012D
S82J-01015D
S82J-01024D
S82J-02505D
S82J-02512D
S82J-02515D
S82J-02524D
S82J-05005D
S82J-05012D
S82J-05024D
S82J-10005D
S82J-10012D
S82J-10015D
S82J-10024D
S82J-15024D
---
---
12 V
15 V
24 V
5 V
1 A
---
---
0.7 A
0.5 A
5 A
---
---
---
---
25 W
50 W
---
---
12 V
15 V
24 V
5 V
2.1 A
1.7 A
1.1 A
10 A
4.2 A
2.1 A
20 A
8.5 A
7 A
---
---
---
---
---
---
---
---
12 V
24 V
5 V
---
---
---
---
100 or 200 VAC 100 W
(selected
automatically)
S82J-10005E
S82J-10012E
S82J-10015E
---
S82J-10005F
S82J-10012F
S82J-10015F
---
12 V
15 V
24 V
24 V
100 to 240 VAC
4.5 A
6.5 A
100 or 200 VAC 150 W
(selected
S82J-15024E
S82J-15024F
automatically)
100 or 200 VAC 300 W
(selectable)
24 V
14 A
27 A
S82J-30024
S82J-30024N
S82J-60024
S82J-60024N
---
---
---
---
---
---
---
---
600 W
L-80
Switch mode Power Supply S82J
I DIN Track Mounting Bracket Type
Configuration
Input Voltage
Power
ratings
Output
voltage
Output
current
Front terminals
Top terminals
Connector
Open-frame type 100 to 240 VAC 10 W
5 V
2 A
S82J-01005AD
S82J-01012AD
S82J-01015AD
S82J-01024AD
S82J-02505AD
S82J-02512AD
S82J-02515AD
S82J-02524AD
S82J-05005AD
S82J-05012AD
S82J-05024AD
S82J-10005AD
S82J-10012AD
S82J-10015AD
S82J-10024AD
S82J-15024AD
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
12 V
15 V
24 V
5 V
1 A
0.7 A
0.5 A
5 A
25 W
50 W
12 V
15 V
24 V
5 V
2.1 A
1.7 A
1.1 A
10 A
4.2 A
2.1 A
20 A
8.5 A
7 A
12 V
24 V
5 V
100 or 200 VAC 100 W
(selected
automatically)
S82J-10005BD
S82J-10012BD
S82J-10015BD
---
S82J-10005CD
S82J-10012CD
S82J-10015CD
---
12 V
15 V
24 V
24 V
100 to 240 VAC
4.5 A
6.5 A
100 or 200 VAC 150 W
(selected
S82J-15024BD
S82J-15024CD
automatically)
Covered type
100 to 240 VAC 10 W
5 V
2 A
S82J-01005DD
S82J-01012DD
S82J-01015DD
S82J-01024DD
S82J-02505DD
S82J-02512DD
S82J-02515DD
S82J-02524DD
S82J-05005DD
S82J-05012DD
S82J-05024DD
S82J-10005DD
S82J-10012DD
S82J-10015DD
S82J-10024DD
S82J-15024DD
---
---
12 V
15 V
24 V
5 V
1 A
---
---
0.7 A
0.5 A
5 A
---
---
---
---
25 W
50 W
---
---
12 V
15 V
24 V
5 V
2.1 A
1.7 A
1.1 A
10 A
4.2 A
2.1 A
20 A
8.5 A
7 A
---
---
---
---
---
---
---
---
12 V
24 V
5 V
---
---
---
---
100 or 200 VAC 100 W
(selected
automatically)
S82J-10005ED
S82J-10012ED
S82J-10015ED
---
S82J-10005FD
S82J-10012FD
S82J-10015FD
---
12 V
15 V
24 V
24 V
100 to 240 VAC
4.5 A
6.5 A
100 or 200 VAC 150 W
(selected
S82J-15024ED
S82J-15024FD
automatically)
Switch mode Power Supply S82J
L-81
L-82
Switch mode Power Supply S82J
Specifications
I Ratings/Characteristics
Item
100 to 240 VAC input
25 W 50 W
100 or 200 VAC
100 or 200 VAC
(selectable)
(selected automatically)
10 W
100 W (24 V)
100 W
150 W
300 W
600 W
(5, 12, 15 V)
Efficiency (typical)
67% min. (77% min. for 50-W, 24- 83% min.
V models)
75% min.
82% min.
Input
Voltage
100 to 240 VAC (85 to 264 VAC)
110 to 170 VDC (set the terminal (L) to + side)
(10 and 25 W only) (See note 1.)
100 (85 to 132) or 200
(170 to 264) VAC
(selected automatically) (selectable)
100 (85 to 132) or 200
(170 to 253) VAC
Frequency
50/60 Hz (47 to 450 Hz)
Current
(See note
2.)
100 VAC 0.35 A
input max.
0.8 A max. 1.4 A max. 2.5 A max.
2.5 A max.
1.4 A max.
3.5 A max. 8 A max. 14 A max.
200 VAC 0.3 A max. 0.6 A max. 0.8 A max. 1.5 A max.
input
2.1 A max. 4 A max. 7 A max.
Leakage
current
(See note
2.)
100 VAC 0.5 mA max.
input
200 VAC 1 mA max.
input
Inrush cur- 100 VAC 25 A max.
rent (25°C, input
30 A max.
60 A max.
cold start)
200 VAC 50 A max.
(See note
input
2.)
Noise filter
Yes
10% (adjustable with variable resistor (V. ADJ))
Output
(See note
3.)
Voltage adjustment
range
Ripple (See note 2.)
2% (p-p) max.
0.4% max.
Input variation
influence
Load variation
influence
0.8% max. (with rated input, 10% to 100% load)
Temperature variation 0.05%/°C max. (with rated input and output)
influence
Startup time
500 ms max. (up to 90% of output voltage at rated input and output)
300 ms max. (up to 90%
of output voltage at rated
input and output)
Hold time (See note 2.) 20 ms min.
Additional Overload protection
function
105% to 160% of rated load current, inverted L
drop/intermittent operation type, automatic reset type, automatic reset (For the 600-W model, the cir-
cuit will be shut OFF when the overload exceeds 5
105% min. of rated load current, inverted L drop
3 s. Protection-ON alarm indicator lit (See note 4.))
Overvoltage
No
No
Yes
Yes (5-V out- No
Yes, protection-ON alarm
indicator lit (See note 4.)
protection (See note 5.)
(See note 5.) put models
only) (See
note 5.)
Overheat protection
Yes,
protection-
ON alarm
indicator lit
(See note 4.)
Protection-ON alarm
indicator
No
Yes (color, red)
Parallel operation
Series operation
No
No
Yes, 5 units max.
Yes
Switching Power Supply S82J
L-83
Item
100 to 240 VAC input
25 W 50 W
100 or 200 VAC
100 or 200 VAC
(selectable)
(selected automatically)
10 W
100 W (24 V)
100 W
150 W
300 W
600 W
(5, 12, 15 V)
Other
Ambient temperature Operating: See the derating curve in the Engineering Data section.
Storage: −25 to 65°C (with no condensation and icing)
Operating: 25% to 85%
Storage: 25% to 90%
Ambient humidity
Dielectric strength
3.0 kVAC, 50/60 Hz for 1 min (between all inputs and all outputs)
2.2 kVAC, 50/60 Hz for 1 min (between all inputs and GR terminal)
1.0 kVAC, 50/60 Hz for 1 min (between all outputs and GR terminal)
Insulation resistance
Vibration resistance
Shock resistance
100 MΩ min. (between all outputs and all inputs/GR terminals at 500 VDC)
10 to 55 Hz, 0.375-mm double amplitude for 2 h each in X, Y, and Z directions
300 m/s2, 3 times each in X, Y, and Z directions
Terminal screw
tightening
0.74 N·m
1.08 N·m
Output indicator
Yes (green)
Electromagnetic
interference
(See note 2.)
Conforms to FCC Class A
EMC
Emission Enclosure:
Emission AC Mains:
Immunity ESD:
EN55011 class A
EN55011 class A
EN61000-4-2: 4 kV contact discharge (level 2)
8 kV air discharge (level 3)
Immunity RF-interference:
Immunity Conducted Disturbance: ENV50141:
ENV50140:
10 Vm (80 MHz to 1 GHz) (level 3)
10 V (0.5 to 80 MHz) (level 3)
Immunity Burst:
EN61000-4-4: 2 kV power-line (level 3)
2 kV output line (level 4)
EMC standards
Conforms to EN50081-2 and EN50082-2
Conforms to EN50081-2
and EN50082-2 (See
note 6.)
With noise filter, confirms
to EN50081-1 (See note
6 and 7.)
Approved
standards
UL
UL508 (Listing), 1950, Class 2
(per UL1310) (See note 10.)
UL508 (Listing), 1012, 1950 (See note 8.) UL508/1012
CSA
VDE
CSA C22.2 No. 14, No. 950,
Class 2 (See note 10.)
CSA C22.2 No. 14, No. 950
CSA EB1402C
EN50178 (VDE0160) and EN60950
Terminal types (only terminal part): VDE0106/P100
Weight (See note 9.)
250 g
max.
350 g
max.
400 g
max.
500 g max.
1,000 g max.
2,000 g
max.
2,500 g max.
Note: 1. DC inputs not included in safety standard approvals.
2. At 100% load for rated input voltage (100 VAC or 200 VAC).
3. The output specification is defined at the power supply output terminals.
4. For resetting, turn OFF the power supply, leave for more than three minutes (90 seconds min. for the 300-W models), and then turn ON
the power supply.
5. For resetting, turn OFF the power supply, leave for more than one minute, and then turn ON the power supply.
6. To ensure the Emission Enclosure rating ferrite ring cores (recommended model: S82Y-JC-T) should be used on all cabling.
7. To ensure the Emission AC Mains rating for EN50081-1 (only for 200-VAC input), a noise filter (recommended models: S82Y-JF3-N for
300-W, S82Y-JF6-N for 600-W) should be used on the input lines.
8. With UL508, 150-W connector type has “Recognized” approval.
9. The weight indicated is the weight of the open-frame type. (Includes the covers for 300-W and 600-W models)
10. Class 2 approved for 10-W, 25-W (except for 5-V output), and 50-W (only for 24-V output) models.
I Reference Value
Item
Value
Definition
Reliability (MTBF)
135,000 hours min.
MTBF stands for Mean Time Between Failures, which is calculated according to the probabil-
ity of accidental device failures, and indicates reliability of devices. Therefore, it does not nec-
essarily represent a life of the product.
Life expectancy
10 yrs. min.
The life expectancy indicates average operating hours under the ambient temperature of
40°C and a load rate of 50%. Normally this is determined by the life expectancy of the built-
in aluminum electrolytic capacitor.
L-84
Switching Power Supply S82J
Connections
I Block Diagrams
S82J-010@@@@ (10 W)
S82J-025@@@@ (25 W)
Smoothing
circuit
Fuse*
AC (L)
Rectifier
+V
Input
AC (N)
Noise filter
DC Output
−V
Inrush current
protection circuit
Rectifier and
smoothing
circuit
*
Fuse capacity: 10 W, 1 A
25 W, 2 A
Control circuit
Overload
detection
circuit
Detector
Photocoupler
S82J-050@@@@ (50 W)
Fuse*
AC(L)
+V
DC Output
Input
Noise filter
AC(N)
−V
Inrush current Smoothing
Rectifier and
smoothing
circuit
Rectifier
protection
circuit
circuit
*
Fuse capacity: 3 A
Control circuit
Overload
detection
circuit
Detector
Photocoupler
S82J-100@@@@
(100 W, 5-/12-/15-V Output)
Fuse*
AC (L)
+V
Input
Noise filter
DC Output
−V
AC (N)
100 or 200 V
(selected auto-
matically)
Rectifier and
smoothing
circuit
Rectifier and
smoothing circuit
Inrush current
protection circuit
*
Fuse capacity: 5 A
Control circuit
Detector
Overload
detection
circuit
Photocoupler
Over-
voltage
detector
Overvoltage protection circuit (5 V only)
Switching Power Supply S82J
L-85
S82J-10024@@ (100 W, 24-V Output)
Fuse (5 A)
AC(L)
+V
DC Output
Input
AC(N)
Noise filter
−V
Rectifier Inrush current Smoothing
Rectifier and
smoothing
circuit
protection
circuit
circuit
Control circuit
Overload
detection
circuit
Detector
Photocoupler
Overload
detection
circuit
Photocoupler
S82J-15024@@ (150 W)
Fuse (8 A)
+V
AC (L)
Input
DC Output
Noise filter
AC (N)
−V
Rectifier and
smoothing
circuit
Inrush current
100 or 200 V
Rectifier
protection circuit (selected au-
tomatically)
Control circuit
Detector
Overcurrent
detector
Photocoupler
S82J-30024@ (300 W)
Rectifier and
smoothing circuit
Fuse (10 A)
Input
DC Output
Noise filter
Inrush current
protection circuit
Rectifier and
smoothing
circuit
100/200 V (selectable)
Control
circuit
Overcurrent
detector
Detector
Photocoupler
Photocoupler
Overvoltage
detector
Note: Short-circuit the input voltage selector
terminals if the input is 100 to 120 VAC.
Keep the terminals open if the input is
200 to 230 VAC.
Parallel operation selector
L-86
Switching Power Supply S82J
S82J-60024@ (600 W)
Fuse
20 A
Rectifier and
smoothing circuit
Input
Noise filter
DC Output
Inrush current
protection circuit
Rectifier and
smoothing
circuit
100/200 V (selectable)
Fan
Control
circuit
Overcurrent
detector
Detector
Photocoupler
Photocoupler
Overheat
detector
Note: Short-circuit the input voltage selector
terminals if the input is 100 to 120 VAC.
Keep the terminals open if the input is 200
to 230 VAC.
Overvoltage
detector
Parallel operation selector
I Installation
10-/25-/50-/100-/150-W Models
Note: 10-/25-/50-/100 (24 V)-W models are available only as Front Terminal Models.
Front Terminals Model
Top Terminals Model
Connector Model
5
6
5
6
5
6
+V
+V
+V
1
1
1
−V
−V
−V
GR
GR
3
3
2
GR
3
2
AC (L)
AC (N)
AC (L)
2
AC (L)
NC
AC (N)
AC (N)
9
Types of Connector for the Connector Model (Housing and Terminal Not Included)
Connector
Input
Connector on the PCB side
Housing
Terminal
Wafer (Made by Molex) 5277-04A-RE
Housing (Made by Molex) 5196-04-RE or Terminal (Made by Molex) 5194T or
5196-04
5194TL
Output
Tab header (Made by Nippon AMP)
1-178140-5
Rise housing (Made by Nippon AMP)
1-178129-6
Rise contact (Made by Nippon AMP)
1-175196-5 or 1-175218-5
Note: The permissible current of the output connector is 8 A per pin.
Switching Power Supply S82J
L-87
300-W Models
5
6
+V
+V
−V
−V
1
AC (L)
AC (N)
2
4
Side view
GR
3
7
8
600-W Models
6 5
7
1
Side view
−V −V +V +V
8
AC (L)
AC (N)
GR
1. DC Output Terminals: Connect the load lines to these terminals.
2. Input Terminals: Connect the input lines to these terminals.
Note: A fuse is inserted into the AC (L) side.
4
3
2
3. Ground Terminal (GR): Connect a ground line to this terminal.
4. Input Voltage Selector Terminals: Short-circuit the terminals if the input is 100 to 120 VAC and open the terminals if the input is 200 to
230 VAC
5. Output Indicator (DC ON): Lights while a Direct Current (DC) output is ON.
6. Output Voltage Adjuster (V.ADJ): It is possible to increase or decrease the output voltage by 10%.
7. Protection-ON Alarm Indicator: The red indicator will be lit if the overvoltage (for a 300-/600-W model) or overheat protection (for a
600-W model) circuit is triggered. This indicator will also be lit when overcurrent (for a 600-W model) is detected.
8. Parallel/Single Operation Selector: Set the selector to PARALLEL if the Units are in parallel operation.
9. NC Terminals: Leave unconnected.
L-88
Switching Power Supply S82J
Engineering Data
I Derating Curve
10-/25-/50-/100-/150-W Model
Open-frame type
Covered-type
Standard Installation
Forced air-cooling (1 m3/min)
Forced air-cooling
(1 m3/min)
Natural air-cooling
Natural air-cooling
Note: The derating curve shown is for
standard installation. The derating
curve depends on the mounting
direction of the Power Supply.
Ambient temperature (°C)
300-W Model
Ambient temperature (°C)
Single Operation
120
Parallel Operation
Standard mounting
120
Forced air-cooling
(1 m3/min)
(Standard mounting)
20 mm min.
20 mm min.
Forced air-cooling
(1 m3/min)
(Standard mounting)
100
100
Natural air-cooling
(Standard mounting)
Forced air-cooling
(1 m3/min)
Natural air-cooling
(Standard
(Side mounting)
mounting)
Natural cooling
(Side mounting)
Forced air-cooling
(1 m3/min)
20 mm min.
20 mm min.
(Side mounting)
Natural cooling
(Side mounting)
Ambient temperature (°C)
Ambient temperature (°C)
600-W Model
Single Operation
120
Parallel Operation
120
Standard Mounting
20 mm min.
20 mm min.
100
100
20 mm min.
20 mm min.
Ambient temperature (°C)
Ambient temperature (°C)
Note: Provide a minimum clearance of 20 mm between the Power Supplies.
Switching Power Supply S82J
L-89
I Overload Protection
I Overvoltage Protection
10- to 300-W Models
100 (5, 24 V)-W Models
The Power Supply is provided with an overload protection function
that protects the load and the power supply from possible damage by
overcurrent. When the output current rises above 105% to 160% of
the rated output current, the protection function is triggered, decreas-
ing the output voltage. When the output current falls within the rated
range, the overload protection function is automatically cleared.
The Power Supply is provided with an overvoltage protection function
that protects the load and the Power Supply from possible damage
by overvoltage. When the output voltage rises above a set value
(120% of the rated output voltage), the protection function is trig-
gered, shutting off the output voltage. If this occurs, reset the Power
Supply by turning it off for 1 minutes min. and then turning it on
again.
10- to 100 (24 V)-W Models 100 (5, 12, 15 V)-W, 150-W,
and 300-W Models
Overvoltage
protection
operating
Intermittent
operation
Rated output
voltage
Variable range
0
50
100
Rated value
Output current (%)
Output current (%)
Note: 1. If the S82J is connected to a load with a built-in DC-DC con-
verter, the overload protection function may be triggered at
startup, and consequently the S82J may not operate.
300- and 600-W Models
2. Do not continue using the S82J with the output terminals
short-circuited or the overcurrent condition continued, oth-
erwise the internal elements of the S82J may be damaged
or broken.
3. In actual operation, the output voltage may not fall to 0 V
when the overload protection function is triggered. Even
with short-circuits on the load side, the drop in voltage will
vary depending on factors such as the impedance in the
load line.
If a voltage that is 120% of the rated output voltage or above is out-
put, the output voltage will be turned off and simultaneously protec-
tion-ON alarm indicator will be lit. To reset the S82J, turn off the input
voltage, leave the S82J for at least three minutes if it is a 600-W
model or at least 90 seconds if it is a 300-W model, and then apply
the input voltage again.
I Overheat Protection Function
4. The overload protection function is activated at 105% of the
rated output current for 300-W models.
600-W Model Only
600-W Models
If an excessive current flows for 5 s or more, the output will be turned
off and simultaneously protection-ON alarm indicator will be lit. To
reset the S82J, turn off the input voltage, leave the S82J for at least
three minutes, and then apply the input voltage again.
If the internal temperature of the S82J rises excessively as a result of
fan failure or any other reason, the overheat protection circuit will be
triggered to protect the internal elements of the S82J and simulta-
neously a protection-ON alarm indicator will be lit. To reset the S82J,
turn off the input voltage, leave the S82J for at least three minutes,
and then apply the input voltage again.
Note: Do not continue using the S82J with the output terminals short-
circuited or the overcurrent condition continued, otherwise the
internal elements of the S82J may be damaged or broken.
I Inrush Current, Startup Time,
Hold Time
Input ON
Input OFF
AC input
voltage
Inrush current on input application
AC input
current
96.5%
90%
Output
voltage
Hold time
(20 ms
min.)
Startup time
L-90
Switching Power Supply S82J
Dimensions
Note: All units are in millimeters unless otherwise indicated.
Open-frame type and covered type have the same dimensions.
I Front-mounting Bracket Type
12 max.
90 1
S82J-010@@@ (10 W)
Mounting Holes
(Surface Screw Mounting)
3.5
Side Mounting
97 1
65 0.5
Two, M3
5
65 0.5
5
82 0.5
M3.5 terminal
screw
Two, 3.5 dia.
3.5 dia.
82 0.5
78 0.5
3.5
6.5
Bottom Mounting
35 1
28
Two, M3
17.5
Two, M3
For track mounting bracket
(4 mm deep max.)
50 0.5
15
78 0.5
124 1
12 max.
Mounting Holes
(Surface Screw Mounting)
S82J-025@@@ (25 W)
3.5
Side Mounting
97 1
Two, M3
65 0.5
6
65 0.5
5
116 0.5
M3.5 terminal
screw
Two, 3.5 dia.
3.5 dia.
116 0.5
6.5
112 0.5
3.5
Bottom Mounting
Two, M3
40 1
28
17.5
83 0.5
Two, M3
For track mounting bracket
(4 mm deep max.)
21.5
112 0.5
S82J-050@@@ (50 W)
12 max.
161 1
Mounting Holes
3.5
Side Mounting
Two, M3
97 1
65 0.5
7
65 0.5
5
153 0.5
153 0.5
Two, 3.5 dia.
3.5 dia.
M3.5 terminal
screw
150.5 0.5
6.5
3.5
20 0.5
Bottom Mounting
Two, M3
40 1
28
20
10
150.5 0.5
127 0.5
Three, M3
For track mounting bracket
(4 mm deep max.)
22
Switching Power Supply S82J
L-91
12 max.
170 1
S82J-10024@
(100 W, 24-V Output)
Mounting Holes
4.5
Side Mounting
Two, M3
97 1
65 0.5
65 0.5
162 0.5
5
162 0.5
7
M3.5 terminal
screw
4.5 dia.
Three, M4
Bottom Mounting
160 0.5
6.5
4.5 dia.
Two, M3
4.5
25 0.5
15
50 1
28 0.5
27.5
160 0.5
100 0.5
15
S82J-100@@@
198 (see note)
188
(100 W, 5-/12-/15-V Output)
Mounting Holes
(Surface Screw Mounting)
S82J-15024@ (150 W)
4 max.
Side Mounting
4.5
89 0.5
Two, M4
8.1
9.5
97
82 0.8
4.5 dia.
4.5 dia.
180 0.5
3 0.25
3 0.25
M4 x 8
7 0.3
180 0.5
Mounting holes (on both sides)
178 0.5
Bottom Mounting
Note: Top terminal and connector models
Two, M4
25 0.5
are 188 mm wide.
50
4.5
35 0.5
27.5 0.3
15
178 0.5
100 0.5
55 0.3
Three, M4
(6 mm max. deep)
S82J-30024@ (300 W)
Eight, M4 holes
(depth: 8 max.
on both sides)
Nine, M4 terminal screws
4 max.
(19)
Mounting Holes
(Surface Screw Mounting)
Side Mounting
Side
Four, 4.5 dia.
50 0.5
Four, M4 holes (depth: 8 max.)
150 0.5
Bottom Mounting
Four, 4.5 dia.
100 0.5
150 0.5
L-92
Switching Power Supply S82J
S82J-60024@ (600 W)
Eight, M4 holes
(depth: 8 max.
on both sides)
Mounting Holes
(Surface Screw Mounting)
Side Mounting
Four, 4.5 dia.
50 0.5
Four, M4 holes (depth: 8 max. on one side)
Four, M4 holes
(depth: 8 max.)
150 0.5
Bottom Mounting
Nine, M4 terminal screws
Four, 4.5 dia.
100 0.5
150 0.5
Dimensions with Mounting Bracket (Provided)
10-/25-/50-/100 (24 V)-W Models
Mounting Holes
Using the Mounting Bracket
11
1.5
Attach the mounting bracket to the panel and
loosely tighten the two screws. Insert the projected
parts of the bracket (b) to the square holes of the
power supply (a). Then securely tighten the screws.
4.6
15 0.2
9
Two,
3.5 dia.
74
Two, M3
60
60
Note: The mounting screws are order separately.
4.6
11
20
31.5
5
20
4.7
(b)
15
20.5
(a)
t=1.0
Power supply unit
Mounting bracket
(b)
(a)
100- (5, 12, 15 V) and 150-W Models
Mounting with Brackets
Mounting bracket
6.5
11
5 dia.
120 max.
110 0.5
23.5
38
1.5
t=0.8
Two, 5 dia.
30 0.5
Note: The brackets are for front-mounting.
Switching Power Supply S82J
L-93
300-W Models
10 dia.
Two, 5 dia.
Note: To provide ventilation
space, the body will shift
forward by 21.6 mm from
the mounting surface.
t= 1.6
600-W Models
Note: To provide ventilation space, the body will shift
forward by 23.6 mm from the mounting surface.
L-94
Switching Power Supply S82J
I DIN Track Mounting Bracket Type
S82J-010@@@D (10 W)
7 max.
12 max.
9 max. when slided out
S82J-025@@@D (25 W)
7 max.
12 max.
9 max. when slided out
7 max.
12 max.
S82J-050@@@D (50 W)
9 max. when slided out
7 max.
12 max.
S82J-10024@D
(100 W, 24-V Output)
9 max. when slided out
Switching Power Supply S82J
L-95
S82J-100@@@D (100 W, 5-/12-/15-V Output)
S82J-15024@D (150 W)
7 max.
4 max.
9 max. when slided out
I DIN Track Mounting Bracket (Order Separately)
Can be used with 10-W to 150-W Front-mounting Bracket models.
If DIN track mounting is necessary, use a DIN Track Mounting Bracket. Refer to the S82Y DIN Track Mounting Bracket datasheet for details.
I Front-mounting Bracket for S82J-10024@ Power Supply (Order
Separately)
(Unit: mm)
Product
Model number
Dimensions
Mounting hole dimensions
Three, 4.5-dia. holes
Front-mounting
Bracket
S82Y-J10F
Three, M4
40
50
20
50
15 15
t=1.6
180
Note: These Front-mounting Brackets cannot be used with S82J 100-W (5, 12, or 15-V) or 150-W models.
L-96
Switching Power Supply S82J
Precautions
100 (5, 12, 15 V)/150-/300-/600-W Models
(A) Side mounting (except for 300- and 600-W models)
Mounting
To improve and maintain the reliability of the Power Supply over a
long period of time, adequate consideration must be given to heat
radiation.
(B) Bottom mounting (secured with screws from the inside of the
Switching Power Supply) (except for 300- and 600-W models)
The Power Supply is designed to radiate heat by means of natural
air-flow. Therefore, mount the Power Supply so that air flow takes
place around the Power Supply.
(C) Bottom mounting (secured with screws from the back of the
Switching Power Supply)
When mounting the Power Supply, mounting it to a metal plate is rec-
ommended.
When mounting two or more Power Supplies side-by-side, allow at
least 20 mm spacing between them, as shown in the following illus-
tration.
(B)
Forced air-cooling is recommended.
(A)
Air
(C)
(D) Front mounting
Metal plate
20 mm min.
Front mounting is possible with the mounting brackets provided.
Refer to Dimensions.
Mounting Methods
The following mounting methods are available.
10-/25-/50-/100 (24 V)-W Models
(A) Side mounting
(B) Bottom mounting
(C) Front mounting (see Accessories)
Mounting brackets
(provided)
Metal plate
(B)
(A)
Switching Power Supply S82J
L-97
With the S82J-050@@@@ or S82J-10024@@, if the load is shorted a
reverse voltage may result in the Power Supply causing deterioration
and damage. It is recommended that diodes are connected as
shown in the previous diagram (D1, D2).
Generating Output Voltage ( )
An output of can be generated by using two Power Supplies as
shown below, because the Power Supply produces a floating output.
Parallel Operation
Only 300- and 600-W models can be in parallel operation. Do not
operate any other models in parallel. The output of the models in par-
allel operation is a maximum of 80% of the rated output.
+V
Load
+V
INPUT
−V
0 V
Load
+V
Set the parallel operation selector to PARALLEL if the Units are in
parallel operation and make sure that the thickness and the length of
all wires connected to the load are the same to ensure that the wires
will have no voltage drop differences.
INPUT
−V
−V
If operation amplifiers as loads are connected in series, connect a
diode between the positive and negative output terminals of each
Switching Power Supplies as shown in the illustration below. Without
these diodes, the Power Supply may not start when power is turned
on, possibly damaging internal circuits over a period of time.
Fan Replacement
The service life of the fan is approximately 50,000 hours (at 25°C).
The service life varies, however, depending on the ambient tempera-
ture or other surrounding environmental conditions such as dust. As
a preventive maintenance measure, replace the fan within two years
if it is used at an ambient temperature of 40°C.
Use Schottky barrier diodes with a low forward voltage (VF). Other
types of diodes will not be effective.
Guidelines for the dielectric strength and current of the diodes are as
follows:
Fans are available as replacements.
Dielectric strength: At least twice the rated output voltage of the
Power Supply
Forward current: At least twice the rated output
current
No diodes are required for models that allow series operation.
+ V
INPUT
D1
Load
− V
Load
Load
+ V
D2
INPUT
− V
Model: S82Y-JFAN
Fan Set:
Series Operation
Only models with power ratings of 50/100/150/300/600 W allow
series operation.
Fan (above), four M4 x 35 sems screws, instruction sheet, and pack-
ing case
Replace the fan as shown in the following illustration.
As shown in the following diagram, the output voltage from each
Switching Power Supply can be added.
D1
+V
INPUT
−V
Load
+V
INPUT
−V
D2
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
In the interest of product improvement, specifications are subject to change without notice.
Cat. No. M047-E1-07
L-98
Switching Power Supply S82J
相关型号:
©2020 ICPDF网 联系我们和版权申明