SS-10-T [OMRON]
SNAP ACTING/LIMIT SWITCH;型号: | SS-10-T |
厂家: | OMRON ELECTRONICS LLC |
描述: | SNAP ACTING/LIMIT SWITCH 开关 |
文件: | 总12页 (文件大小:305K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SSnaSp Action Switch
Subminiature Snap Action Switch
• Economical, subminiature snap action switch offers long
service life (30 million operations minimum)
• All models are free from overtravel restrictions, permit easy
setting
• Wide switching capacity range from microvoltage/current
loads (1 mA at 5 VDC to high-capacity loads 10.1 A at 250
VAC)
• Standard operating force, low force or super-low force
models available
• RoHS Compliant
Ordering Information
I Standard Type
Microvoltage/microcurrent load 0.1 A max. (Bifurcated crossbar contacts)
Model
PCB terminal
Soldered
terminal
Tab (#110)
terminal
Contact
OF
Actuator
Straight vertical Parallel to left
Parallel to right
Pin plunger
25 g
50 g
150 g
8 g
SS-01-ED
—
—
SS-01-E
SS-01-ET
SS-01-FD
—
—
SS-01-F
SS-01-FT
SS-01D
SS-01D1
SS-01D2
SS-01
SS-01T
Hinge lever
SS-01GL-ED
SS-01GL-FD
SS-01GLD
—
—
SS-01GL-E
SS-01GL-F
SS-01GL
SS-01GL-ET
SS-01GL-FT
SS-01GLT
16 g
50 g
8 g
—
—
SS-01GLD1
SS-01GLD2
Simulated roller
lever
SS-01GL13-ED
SS-01GL13-FD
SS-01GL13D
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
SS-01GL13-E
SS-01GL13-F
SS-01GL13
SS-01GL14-E
SS-01GL14-F
SS-01GL14
SS-01GL2-E
SS-01GL2-F
SS-01GL2
SS-01GL13-ET
SS-01GL13-FT
SS-01GL13T
SS-01GL14-ET
—
16 g
50 g
8 g
Formed hinge lever
Hinged roller lever
16 g
50 g
8 g
SS-01GL14-FD
SS-01GL14D
SS-01GL2-ED
SS-01GL2-FD
SS-01GL2D
SS-01GL14T
SS-01GL2-ET
SS-01GL2-FT
SS-01GL2T
16 g
50 g
1022
Snap Action Switch SS
I General-Purpose
5 A max. (Standard rivet contacts)
Model
PCB terminal
Soldered
terminal
Tab (#110)
terminal
Contact
OF
Actuator
Straight vertical Parallel to left
Parallel to right
SS-5-FD2
Pin plunger
50 g
150 g
16 g
50 g
16 g
50 g
16 g
50 g
16 g
50 g
SS-5-FD
SS-5-FD1
SS-5-F
SS-5-FT
SS-5D
SS-5D1
SS-5D2
SS-5
SS-5T
Hinge lever
SS-5GL-FD
SS-5GLD
SS-5GL-FD1
SS-5GLD1
—
SS-5GL-FD2
SS-5GLD2
SS-5GL13-FD2
SS-5GL13D2
—
SS-5GL-F
SS-5GL
SS-5GL-FT
SS-5GLT
Simulated roller lever
Formed hinge lever
Hinge roller lever
SS-5GL13-FD
SS-5GL13D
SS-5GL14-FD
SS-5GL14D
SS-5GL2-FD
SS-5GL2D
SS-5GL13-F
SS-5GL13
SS-5GL14-F
SS-5GL14
SS-5GL2-F
SS-5GL2
SS-5GL13-FT
SS-5GL13T
SS-5GL14-FT
SS-5GL14T
SS-5GL2-FT
SS-5GL2T
SS-5GL13D1
SS-5GL14-FD1
SS-5GL14D1
SS-5GL2-FD1
SS-5GL2D1
SS-5GL14D2
SS-5GL2-FD2
SS-5GL2D2
10.1 A max. (Standard rivet contacts)
Model
PCB terminal
Soldered
terminal
Tab (#110)
terminal
Contact
OF
Actuator
Straight vertical Parallel to left
Parallel to right
Pin plunger
150 g
50 g
50 g
50 g
50 g
SS-10D
—
—
—
—
—
—
—
—
—
—
SS-10
SS-10T
Hinge lever
SS-10GLD
SS-10GL13D
—
SS-10GL
SS-10GL13
SS-10GL14
SS-10GL2
SS-10GLT
SS-10GL13T
—
Simulated roller lever
Formed hinge lever
Hinge roller lever
SS-10GL2D
SS-10GL2T
Snap Action Switch SS
1023
Specifications
I Characteristics
Switch type
General-purpose
Operating speed (see note 3)
Operating frequency
0.1 mm to 1 m/second (0.004 to 39.4 in/second)
400 operations per minute (pin plunger actuator type)
60 operations per minute (pin plunger actuator type)
100 MΩ at 500 VDC
600 VAC, 50/60 Hz for 1 minute (see note 1)
1,000 VAC, 50/60 Hz for 1 minute between terminals of same polarity
Mechanical
Electrical
Insulation resistance
Dielectric strength
Crossbar contact type
Others
1,500 VAC, 50/60 Hz for 1 minute between current-carrying parts and
ground
and between each terminal and noncurrent-carrying metal parts
10 to 55 Hz, 1.5 mm double amplitude
Vibration
Shock
Malfunction durability
Mechanical durability
Low-OF type: 500 m/s2 min. (approx. 50 g)
Others:
1,000 m/s2 min. (approx. 100 g)
300 m/s2 min. (approx. 30 g)
200 m/s2 min. (approx. 20 g)
Malfunction durability
Standard type:
Low-OF type:
Lever type at TTP: Contact gap, 1 ms max.
-25° to 85° C with no icing
85% RH max.
Ambient temperature
Humidity
Operating
Service life
Mechanical
Electrical
30 million operations minimum (OT: rated value) (see note 4)
200,000 operations minimum (rated load) (see note 2)
Approx. 1.6 g pin plunger type
Weight
Note: 1. SS-10 series only.
2. 50,000 operations minimum for the SS-10 series.
3. Applies to the pin plunger type (at the pin plunger of the lever type).
4. 10 million operations for the SS-10 series.
5. Data shown are of initial value.
I Operating Characteristics
Part number
SS-01-F
SS-5-F
SS-01
SS-5
Characteristics
OF max.
RF min.
PT max.
OT min.
MD max.
OP
SS-01-E
SS-10
SS-01GL-E
25 g
50 g
150 g
150 g
8 g
2 g
4 g
25 g
25 g
1 g
0.5 mm (0.020 in)
0.5 mm (0.020 in)
0.1 mm (0.004 in)
8.4 0.5 mm
(0.331 0.020 in)
0.5 mm (0.020 in)
0.5 mm (0.020 in)
0.1 mm (0.004 in)
8.4 0.5 mm
(0.331 0.020 in)
0.5 mm (0.020 in)
0.5 mm (0.020 in)
0.1 mm (0.004 in)
8.4 0.5 mm
(0.331 0.020 in)
0.6 mm (0.024 in)
0.4 mm (0.016 in)
0.12 mm (0.005 in)
8.4 0.5 mm
(0.331 0.020 in)
1.2 mm (0.047 in)
0.8 mm (0.032 in)
13.6 mm (0.535 in)
8.8 0.8 mm
(0.346 0.032 in)
Part number
SS-01GL-F
SS-5GL-F
SS-01GL
SS-5GL
SS-10GL13-F
SS-5GL13-F
Characteristics
OF max.
RF min.
PT max.
OT min.
MD max.
OP
SS-10GL
SS-10GL13-E
8 g
16 g
50 g
50 g
16 g
2 g
6 g
6 g
1 g
2 g
1.2 mm (0.047 in)
0.8 mm (0.032 in)
13.6 mm (0.535 in)
8.8 0.8 mm
(0.346 0.032 in)
1.2 mm (0.047 in)
0.8 mm (0.032 in)
13.6 mm (0.535 in)
8.8 0.8 mm
(0.346 0.032 in)
1.0 mm (0.039 in)
1.0 mm (0.039 in)
13.6 mm (0.535 in)
8.8 0.8 mm
(0.346 0.032 in)
1.2 mm (0.047 in)
0.8 mm (0.032 in)
15.5 mm (0.610 in)
10.7 0.8 mm
(0.421 0.032 in)
1.2 mm (0.047 in)
0.8 mm (0.032 in)
15.5 mm (0.610 in)
10.7 0.8 mm
(0.421 0.032 in)
1024
Snap Action Switch SS
Part number
SS-01GL13
SS-5GL13
SS-01GL14-F
SS-5GL14-F
SS-01GL14
SS-5GL14
Characteristics
OF max.
RF min.
PT max.
OT min.
MD max.
OP
SS-10GL13
SS-01GL14-E
8 g
50 g
50 g
16 g
50 g
6 g
6 g
1 g
2 g
6 g
1.2 mm (0.047 in)
0.8 mm (0.032 in)
15.5 mm (0.610 in)
10.7 0.8 mm
(0.421 0.032 in)
1.0 mm (0.039 in)
1.0 mm (0.039 in)
15.5 mm (0.610 in)
10.7 0.8 mm
(0.421 0.032 in)
1.2 mm (0.047 in)
0.8 mm (0.032 in)
14.9 mm (0.587 in)
10.1 0.8 mm
(0.398 0.032 in)
1.2 mm (0.047 in)
0.8 mm (0.032 in)
14.9 mm (0.587 in)
10.1 0.8 mm
(0.398 0.032 in)
1.2 mm (0.047 in)
0.8 mm (0.032 in)
14.9 mm (0.587 in)
10.1 0.8 mm
(0.398 0.032 in)
Part number
SS-01GL2-F
SS-5GL2-F
SS-01GL2
SS-5GL2
Characteristics
OF max.
RF min.
PT max.
OT min.
MD max.
OP
SS-10GL14
SS-01GL2-E
8 g
SS-10GL2
50 g
16 g
50 g
50 g
6 g
1 g
2 g
6 g
6 g
1.0 mm (0.039 in)
1.0 mm (0.039 in)
14.9 mm (0.587 in)
10.1 0.8 mm
(0.398 0.032 in)
1.2 mm (0.047 in)
0.8 mm (0.032 in)
19.3 mm (0.760 in)
14.5 0.8 mm
(0.571 0.032 in)
1.2 mm (0.047 in)
0.8 mm (0.032 in)
19.3 mm (0.760 in)
14.5 0.8 mm
(0.571 0.032 in)
1.2 mm (0.047 in)
0.8 mm (0.032 in)
19.3 mm (0.760 in)
14.5 0.8 mm
(0.571 0.032 in)
1.0 mm (0.039 in)
1.0 mm (0.039 in)
19.3 mm (0.760 in)
14.5 0.8 mm
(0.571 0.032 in)
I Ratings
Microvoltage/microcurrent load type
General purpose/resistive load
Bifurcated crossbar contacts
Contact form
125 VAC
NC
NO
0.1 A
0.1 A
1 A max.
0.1 A
0.1 A
30 VDC
Inrush current
1 A max.
l
Standard type general purpose
Rivet contacts
Resistive load
Lamp load
Inductive load
SS-5 and SS-10
Motor load
Switch series:
Contact form
125 VAC
SS-5
NC
SS-10
NC
SS-5 and SS-10
SS-5 and SS-10
NO
NO
NC
NO
NC
NO
NC
NO
5 A
5 A
10.1 A
10.1 A
10.1 A
10.1 A
4 A
10.1 A
10.1 A
10.1 A
10.1 A
4 A
1.5 A
1 A
0.7 A
0.5 A
2 A
3 A
3 A
2.5 A
1.5 A
3 A
1.3 A
0.8 A
3 A
250 VAC
8 VDC
3 A
3 A
2 A
2 A
5 A
5 A
2 A
5 A
4 A
14 VDC
5 A
5 A
2 A
2 A
4 A
4 A
3 A
3 A
30 VDC
4 A
4 A
2 A
2 A
3 A
3 A
3 A
3 A
125 VDC
250 VDC
Inrush current
0.4 A
0.2 A
0.4 A
0.2 A
0.4 A
0.2 A
0.4 A
0.2 A
0.05 A
0.03 A
0.05 A
0.03 A
0.4 A
0.2 A
0.4 A
0.2 A
0.05 A
0.03 A
0.05 A
0.03 A
20 A max. 10 A max. 20 A max. 15 A max. (both non-inductive and inductive loads)
Note: 1. The above current ratings are the values of the steady-state current.
2. Inductive load has a power factor of 0.4 min. (AC) and a time constant of 7 milliseconds max. (DC). The inductive load applicable to the
SS-10 series must have a power factor of 0.75 min.
3. Lamp load has an inrush current of 10 times the steady-state current
4. Motor load has an inrush current of 6 times the steady-state current.
5. If the switch is used in a DC circuit and is subjected to inrush current or surge, connect a surge suppressor across the switch.
Snap Action Switch SS
1025
I Contact Resistance (mΩ max., initial)
SS-01@
0.1 A
SS-5@
3 A or 5 A
30 mΩ
50 mΩ
—
SS-10@
10.1 A
30 mΩ
—
Contact rating:
Normal operating force models (SS-@)
Low operating force models (SS-@-F)
Super-low operating force models (SS-@-E)
Lead wire models (all OF types)
50 mΩ
100 mΩ
150 mΩ
100 mΩ
—
50 mΩ
—
I Contact Form
SPDT
SPST-NC*
(standard models rated at 0.1 to 0.5 A)
SPST-NO*
(common throughout the series)
(standard models rated at 0.1 to 5 A)
Sealed lead wire terminal models
have color coded leads.
* Consult Omron for SPST-NC and SPST-NO contact form types ordering information.
I Approvals
UL (File No. E41515), CSA (File No. LR21642), SS-5/SS-10: EN conforms 61058-1
Type
Rating
SS-10 series
SS-5 series
SS-01 series
General-purpose type
General-purpose type
Super-low force type
10.1 A, 250 VAC
5 A, 125 V, 3 A 250 VAC
0.1 A, 125 VAC, 30 VDC
VDE (File No. 5861-3221)
Type
Rating
SS-5 series
General-purpose type
5 A, 250 VAC
SEMKO (File Nos. 43-8614026/43-891609)
Type
Rating
SS-10 series
SS-5 series
General-purpose type
General-purpose type
10 A, 250 VAC
5 A, 250 VAC
Note: The rated values approved by each of the safety standards (e.g. UL, CSA) may be different from the performance characteristics individually
defined in this catalog.
1026
Snap Action Switch SS
Engineering Data
I Mechanical service life
I Electrical service life
Standard type (SS-5, SS-10 series)
Standard type (SS-5 series)
Snap Action Switch SS
1027
Dimensions
Unit: mm (inch)
I Pin Plunger
SS-01 (-E, -F)
SS-5 (-F)
SS-10
I Hinge Lever
SS-01GL (-E, -F)
SS-5GL (-F)
SS-10GL
I Simulated Roller Lever
SS-01GL13 (-E, -F)
SS-5GL13 (-F)
SS-10GL13
I Formed Hinge Lever
SS-01GL14 (-E, -F)
SS-5GL14 (-F)
SS-10GL14
Note: 1. Unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions.
2. Straight vertical PCB terminal models are shown above. Soldered terminal, Tab (#110) terminal, lead wire terminal, PCB terminal parallel
to left and PCB terminal parallel to right are shown in the Terminals section.
1028
Snap Action Switch SS
I Hinge Roller Lever
SS-01GL2 (-E, -F)
SS-5GL2 (-F)
SS-10GL2
Note: Unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions.
I Mounting holes
Standard types
Mounting holes below are for reference only
Note: Unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions.
Snap Action Switch SS
1029
Unit: mm (inch)
I Terminals
General-Purpose Type
PCB terminal, straight vertical (D)
PCB terminal, parallel to left (D1)
PCB terminal, parallel to right (D2)
Note: Thickness of all the terminals is 0.5 mm.
Soldered terminal (blank)
Quick-connect tab (#110) terminal (T)
1030
Snap Action Switch SS
MEMO
Snap Action Switch SS
1031
Terms and Conditions of Sale
1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed 12. Warranties. (a) Exclusive Warranty. Seller's exclusive warranty is that the
part of all quotations, acknowledgments, invoices, purchase orders and other
documents, whether electronic or in writing, relating to the sale of products or
services (collectively, the "Products") by Omron Electronic Components LLC
("Seller"). Seller hereby objects to any terms or conditions proposed in
Buyer's purchase order or other documents which are inconsistent with, or in
addition to, these Terms.
Products will be free from defects in materials and workmanship for a period of
twelve months from the date of sale by Seller (or such other period expressed
in writing by Seller). Seller disclaims all other warranties, express or implied.
(b) Limitations. SELLER MAKES NO WARRANTY OR REPRESENTATION,
EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL-
ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS.
BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR
INTENDED USE. Seller further disclaims all warranties and responsibility of
any type for claims or expenses based on infringement by the Products or oth-
erwise of any intellectual property right. (c) Buyer Remedy. Seller's sole obli-
gation hereunder shall be to replace (in the form originally shipped with Buyer
responsible for labor charges for removal or replacement thereof) the non-
complying Product or, at Seller's election, to repay or credit Buyer an amount
equal to the purchase price of the Product; provided that in no event shall
Seller be responsible for warranty, repair, indemnity or any other claims or
expenses regarding the Products unless Seller's analysis confirms that the
Products were properly handled, stored, installed and maintained and not sub-
ject to contamination, abuse, misuse or inappropriate modification. Return of
any Products by Buyer must be approved in writing by Seller before shipment.
Seller shall not be liable for the suitability or unsuitability or the results from the
use of Products in combination with any electrical or electronic components,
circuits, system assemblies, or any other materials or substances or environ-
ments. Any advice, recommendations or information given orally or in writing
are not to be construed as an amendment or addition to the above warranty.
2. Prices; Payment. All prices stated are current, subject to change without
notice by Seller. Buyer agrees to pay the price in effect at time of shipment.
Payments for Products received are due net 30 days unless otherwise stated
in the invoice.
3. Discounts. Cash discounts, if any, will apply only on the net amount of
invoices sent to Buyer after deducting transportation charges, taxes and
duties, and will be allowed only if (i) the invoice is paid according to Seller's
payment terms and (ii) Buyer has no past due amounts owing to Seller.
4. Currencies. If the prices quoted herein are in a currency other than U.S. dol-
lars, Buyer shall make remittance to Seller at the then current exchange rate
most favorable to Seller and which is available on the due date; provided that if
remittance is not made when due, Buyer will convert the amount to U.S. dol-
lars at the then current exchange rate most favorable to Seller available during
the period between the due date and the date remittance is actually made.
5. Governmental Approvals. Buyer shall be responsible for, and shall bear all
costs involved in, obtaining any government approvals required for the impor-
tation or sale of the Products.
6. Taxes. All taxes, duties and other governmental charges (other than general
real property and income taxes), including any interest or penalties thereon,
imposed directly or indirectly on Seller or required to be collected directly or 13. Limitation on Liability; Etc. SELLER SHALL NOT BE LIABLE FOR SPECIAL,
indirectly by Seller for the manufacture, production, sale, delivery, importation,
consumption or use of the Products sold hereunder (including customs duties
and sales, excise, use, turnover and license taxes) shall be charged to and
remitted by Buyer to Seller.
INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CON-
NECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN
CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in
no event shall liability of Seller exceed the individual price of the Product on
which liability is asserted.
7. Financial. If the financial position of Buyer at any time becomes unsatisfactory
to Seller, Seller reserves the right to stop shipments or require satisfactory
security or payment in advance. If Buyer fails to make payment or otherwise 14. Indemnities. Buyer shall indemnify and hold harmless Seller, its affiliates and
comply with these Terms or any related agreement, Seller may (without liability
and in addition to other remedies) cancel any unshipped portion of Products
sold hereunder and stop any Products in transit until Buyer pays all amounts,
including amounts payable hereunder, whether or not then due, which are
owing to it by Buyer. Buyer shall in any event remain liable for all unpaid
accounts.
its employees from and against all liabilities, losses, claims, costs and
expenses (including attorney's fees and expenses) related to any claim, inves-
tigation, litigation or proceeding (whether or not Seller is a party) which arises
or is alleged to arise from Buyer's acts or omissions under these Terms or in
any way with respect to the Products. Without limiting the foregoing, Buyer (at
its own expense) shall indemnify and hold harmless Seller and defend or settle
any action brought against Seller to the extent that it is based on a claim that
any Product made to Buyer specifications infringed intellectual property rights
of another party.
8. Cancellation; Etc. Orders are not subject to rescheduling or cancellation
unless Buyer indemnifies Seller fully against all costs or expenses arising in
connection therewith.
9. Force Majeure. Seller shall not be liable for any delay or failure in delivery 15. Property; Confidentiality. The intellectual property embodied in the Products is
resulting from causes beyond its control, including earthquakes, fires, floods,
strikes or other labor disputes, shortage of labor or materials, accidents to
machinery, acts of sabotage, riots, delay in or lack of transportation or the
requirements of any government authority.
the exclusive property of Seller and its affiliates and Buyer shall not attempt to
duplicate it in any way without the written permission of Seller. Notwithstand-
ing any charges to Buyer for engineering or tooling, all engineering and tooling
shall remain the exclusive property of Seller. All information and materials sup-
plied by Seller to Buyer relating to the Products are confidential and propri-
etary, and Buyer shall limit distribution thereof to its trusted employees and
strictly prevent disclosure to any third party.
10. Shipping; Delivery. Unless otherwise expressly agreed in writing by Seller:
1. Shipments shall be by a carrier selected by Seller;
2. Such carrier shall act as the agent of Buyer and delivery to such carrier
shall constitute delivery to Buyer;
16. Miscellaneous. (a) Waiver. No failure or delay by Seller in exercising any right
and no course of dealing between Buyer and Seller shall operate as a waiver
of rights by Seller. (b) Assignment. Buyer may not assign its rights hereunder
without Seller's written consent. (c) Law. These Terms are governed by Illi-
nois law (without regard to conflict of law principles). Federal and state courts
in Illinois shall have exclusive jurisdiction for any dispute hereunder.
(d) Amendment. These Terms constitute the entire agreement between Buyer
and Seller relating to the Products, and no provision may be changed or
waived unless in writing signed by the parties. (e) Severability. If any provision
hereof is rendered ineffective or invalid, such provision shall not invalidate any
other provision. (f) Setoff. Buyer shall have no right to set off any amounts
against the amount owing in respect of this invoice.. (g) Definitions. As used
herein, "including" means "including without limitation".
3. All sales and shipments of Products shall be FOB shipping point (unless
otherwise stated in writing by Seller), at which point title to and all risk of
loss of the Products shall pass from Seller to Buyer, provided that Seller
shall retain a security interest in the Products until the full purchase price is
paid by Buyer;
4. Delivery and shipping dates are estimates only.
5. Seller will package Products as it deems proper for protection against
normal handling and extra charges apply to special conditions.
11. Claims. Any claim by Buyer against Seller for shortage or damage to the
Products occurring before delivery to the carrier must be presented in writing
to Seller within 30 days of receipt of shipment and include the original trans-
portation bill signed by the carrier noting that the carrier received the Products
from Seller in the condition claimed.
Certain Precautions on Specifications and Use
1. Suitability for Use. Seller shall not be responsible for conformity with any stan- 2. Programmable Products. Seller shall not be responsible for the user's
dards, codes or regulations which apply to the combination of the Product in
programming of a programmable product, or any consequence thereof.
Buyer's application or use of the Product. At Buyer's request, Seller will pro- 3. Performance Data. Performance data given in this publication is provided as a
vide applicable third party certification documents identifying ratings and limita-
tions of use which apply to the Product. This information by itself is not
sufficient for a complete determination of the suitability of the Product in combi-
nation with the end product, machine, system, or other application or use.
guide for the user in determining suitability and does not constitute a warranty
It may represent the result of Seller's test conditions, and the users must corre
late it to actual application requirements. Actual performance is subject to
Seller's Warranty and Limitations of Liability.
Buyer shall be solely responsible for determining appropriateness of the partic- 4. Change in Specifications. Product specifications and accessories may be
ular Product with respect to Buyer's application, product or system. Buyer
shall take application responsibility in all cases but the following is a non-
exhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii)Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety
equipment, and installations subject to
changed at any time based on improvements and other reasons. It is our prac
tice to change part numbers when published ratings or features are changed
or when significant construction changes are made. However, some specifica
tions of the Product may be changed without any notice. When in doubt, spe
cial part numbers may be assigned to fix or establish key specifications for you
application. Please consult with your Seller representative at any time to con
firm actual specifications of purchased Product.
5. Errors and Omissions. The information in this publication has been carefully
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors, or omissions.
6. RoHS Compliance. Where indicated, our products currently comply, to the bes
of our knowledge as of the date of this publication, with the requirements of the
European Union's Directive on the Restriction of certain Hazardous Sub
stances ("RoHS"), although the requirements of RoHS do not take effect unti
July 2006. These requirements may be subject to change. Please consult ou
website for current information.
separate industry or government regulations.
(iii)Use in consumer products or any use in significant quantities.
(iv)Systems, machines and equipment that could present a risk to life or
property. Please know and observe all prohibitions of use applicable to this
product.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT
THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE
INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website
at www.components.omron.com – under the “About Us” tab, in the Legal Matters section.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.components.omron.com
Canada - http://www.omron.ca
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
OMRON CANADA, INC.
885 Milner Avenue
Toronto, Ontario M1B 5V8
416-286-6465
847-882-2288
Cat. No. JB301-E3-01
3/05
Specifications subject to change without notice
Printed in USA
相关型号:
SS-101
SS-101人体感应模块说明(高电平输出型) 产品名称:SS-101人体感应模块 产品概述: SS-101是基于红外线技术的自动控制产品, 灵敏度高,可靠性强, 广泛应用于各类自动感应电器设备。
ETC
SS-101-G-21B
Board Connector, 1 Contact(s), 1 Row(s), Female, Straight, Solder Terminal, Socket, ROHS COMPLIANT
SAMTEC
SS-101-G-21C
Board Connector, 1 Contact(s), 1 Row(s), Female, Straight, Solder Terminal, Socket, ROHS COMPLIANT
SAMTEC
©2020 ICPDF网 联系我们和版权申明