SS-10GL-3D [OMRON]
Subminiature Basic Switch;
| 型号： | SS-10GL-3D |
| 厂家： | 
OMRON ELECTRONICS LLC |
| 描述： | Subminiature Basic Switch |
| 文件： | 总8页 (文件大小：1076K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SS
Subminiature Basic Switch
Subminiature Basic Switch
Offers High Reliability and
Security
● The OMRON's best-selling micro switches of a
wide variety from 0.1A to 10.1A.
S
S
● A variety of models are available, with operating
force ranging from low to high.
● Two split springs ensure a high stability and
durability of 30,000,000 operations.
RoHS Compliant
Model Number Legend
1
2
3
4
5
6
SS-
@ @ @ @ @ @
1. Ratings
4. Contact form
None : SPDT
10 : 250 VAC 10.1A
5 : 125 VAC 5 A
01 : 30 VDC 0.1A
-2 : SPST-NC
-3 : SPST-NO
2. Actuator
5. Terminals
None : Pin plunger
None : Solder terminals
GL : Hinge lever
T
D
: Quick-connect terminals (#110)
: PCB terminals
GL111: Long hinge lever
GL13 : Simulated roller lever
GL2 : Hinge roller lever
GL02 : Hinge roller lever
6. Heat resistance
None : Standard (85°C)
-T : Heat-resistant (120°C)
(Roller material: Stainless) heat-resistant
3. Maximum Operating Force (OF)
None : 1.47 N {150 gf}
-F : 0.49 N {50 gf} (0.1 A, 5 A)
-E : 0.25 N {25 gf} (0.1 A)
Note. These values are for the pin plunger models.
List of Models
●Standard Models
Ratings
10.1 A
SS-10
SS-10-2
SS-10-3
5 A
SS-5
SS-5-2
SS-5-3
0.1 A
SS-01
SS-01-2
SS-01-3
Actuator
Terminals
Contact Form Maximum Operating Force (OF)
SPDT
SPST-NC
SPST-NO
SPDT
Solder terminals
SS-10T
SS-5T
SS-01T
Quick-connect
terminals (#110)
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
1.47 N {150 gf}
0.49 N {50 gf}
0.25 N {25 gf}
SS-10-2T
SS-10-3T
SS-10D
SS-10-2D
SS-5-2T
SS-5-3T
SS-5D
SS-5-2D
SS-5-3D
SS-5-F
SS-5-F-2
SS-5-F-3
SS-5-FT
SS-5-F-2T
SS-5-F-3T
SS-5-FD
SS-5-F-2D
SS-5-F-3D
SS-01-2T
SS-01-3T
SS-01D
SS-01-2D
SS-01-3D
SS-01-F
PCB terminals
SS-10-3D
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Solder terminals
SS-01-F-2
SS-01-F-3
SS-01-FT
SS-01-F-2T
SS-01-F-3T
SS-01-FD
SS-01-F-2D
SS-01-F-3D
SS-01-E
SS-01-E-2
SS-01-E-3
SS-01-ET
SS-01-E-2T
SS-01-E-3T
SS-01-ED
SS-01-E-2D
SS-01-E-3D
Pin plunger
Quick-connect
terminals (#110)
PCB terminals
-
-
-
-
-
-
-
-
-
Solder terminals
Quick-connect
terminals (#110)
PCB terminals
Separator (Sold Separately), Terminal Connector (Sold Separately)
Refer to "Basic Switch Common Accessories"
1
SS
Subminiature Basic Switch
Ratings
10.1 A
SS-10GL
SS-10GL-2
SS-10GL-3
SS-10GLT
SS-10GL-2T
SS-10GL-3T
SS-10GLD
5 A
SS-5GL
0.1 A
SS-01GL
SS-01GL-2
SS-01GL-3
SS-01GLT
SS-01GL-2T
SS-01GL-3T
SS-01GLD
Actuator
Terminals
Contact Form Maximum Operating Force (OF)
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
Solder terminals
SS-5GL-2
SS-5GL-3
SS-5GLT
SS-5GL-2T
SS-5GL-3T
SS-5GLD
SS-5GL-2D
SS-5GL-3D
SS-5GL-F
SS-5GL-F-2
SS-5GL-F-3
SS-5GL-FT
SS-5GL-F-2T
SS-5GL-F-3T
SS-5GL-FD
SS-5GL-F-2D
SS-5GL-F-3D
-
Quick-connect
terminals (#110)
0.49 N {50 gf}
0.16 N {16 gf}
0.08 N {8 gf}
0.39 N {40 gf}
0.12 N {12 gf}
0.06 N {6 gf}
0.49 N {50 gf}
0.16 N {16 gf}
0.08 N {8 gf}
PCB terminals
SS-10GL-2D
SS-10GL-3D
SS-01GL-2D
SS-01GL-3D
SS-01GL-F
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Solder terminals
SS-01GL-F-2
SS-01GL-F-3
SS-01GL-FT
SS-01GL-F-2T
SS-01GL-F-3T
SS-01GL-FD
SS-01GL-F-2D
SS-01GL-F-3D
SS-01GL-E
SS-01GL-E-2
SS-01GL-E-3
SS-01GL-ET
SS-01GL-E-2T
SS-01GL-E-3T
SS-01GL-ED
SS-01GL-E-2D
SS-01GL-E-3D
SS-01GL111
SS-01GL111-2
SS-01GL111-3
SS-01GL111T
SS-01GL111-2T
SS-01GL111-3T
SS-01GL111D
SS-01GL111-2D
SS-01GL111-3D
SS-01GL111-F
SS-01GL111-F-2
SS-01GL111-F-3
SS-01GL111-FT
S
S
Hinge lever
Quick-connect
terminals (#110)
PCB terminals
Solder terminals
-
-
-
-
-
-
-
-
Quick-connect
terminals (#110)
PCB terminals
-
-
SS-10GL111
SS-10GL111-2
SS-10GL111-3
SS-10GL111T
SS-10GL111-2T
SS-10GL111-3T
SS-10GL111D
SS-10GL111-2D
SS-5GL111
SS-5GL111-2
SS-5GL111-3
SS-5GL111T
SS-5GL111-2T
SS-5GL111-3T
SS-5GL111D
SS-5GL111-2D
SS-5GL111-3D
SS-5GL111-F
SS-5GL111-F-2
SS-5GL111-F-3
SS-5GL111-FT
Solder terminals
Quick-connect
terminals (#110)
PCB terminals
SS-10GL111-3D
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Solder terminals
Long hinge lever
Quick-connect
terminals (#110)
SS-5GL111-F-2T SS-01GL111-F-2T
SS-5GL111-F-3T SS-01GL111-F-3T
SS-5GL111-FD
SS-5GL111-F-2D SS-01GL111-F-2D
SS-5GL111-F-3D SS-01GL111-F-3D
SS-01GL111FD
PCB terminals
-
-
-
-
-
-
-
-
SS-01GL111-E
SS-01GL111-E-2
SS-01GL111-E-3
SS-01GL111-ET
SS-01GL111-E-2T
SS-01GL111-E-3T
SS-01GL111-ED
SS-01GL111-E-2D
SS-01GL111-E-3D
SS-01GL13
SS-01GL13-2
SS-01GL13-3
SS-01GL13T
SS-01GL13-2T
SS-01GL13-3T
SS-01GL13D
SS-01GL13-2D
SS-01GL13-3D
SS-01GL13-F
SS-01GL13-F-2
SS-01GL13-F-3
SS-01GL13-FT
SS-01GL13-F-2T
SS-01GL13-F-3T
SS-01GL13-FD
SS-01GL13-F-2D
SS-01GL13-F-3D
SS-01GL13-E
SS-01GL13-E-2
SS-01GL13-E-3
SS-01GL13-ET
SS-01GL13-E-2T
SS-01GL13-E-3T
SS-01GL13-ED
SS-01GL13-E-2D
SS-01GL13-E-3D
Solder terminals
Quick-connect
terminals (#110)
PCB terminals
-
-
-
SS-10GL13
SS-10GL13-2
SS-10GL13-3
SS-10GL13T
SS-10GL13-2T
SS-10GL13-3T
SS-10GL13D
SS-10GL13-2D
SS-5GL13
SS-5GL13-2
SS-5GL13-3
SS-5GL13T
SS-5GL13-2T
SS-5GL13-3T
SS-5GL13D
SS-5GL13-2D
SS-5GL13-3D
SS-5GL13-F
SS-5GL13-F-2
SS-5GL13-F-3
SS-5GL13-FT
SS-5GL13-F-2T
SS-5GL13-F-3T
SS-5GL13-FD
Solder terminals
Quick-connect
terminals (#110)
PCB terminals
SS-10GL13-3D
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Solder terminals
Simulated roller lever
Quick-connect
terminals (#110)
PCB terminals
SS-5GL13-F-2D
SS-5GL13-F-3D
-
-
-
-
-
-
-
-
-
Solder terminals
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
Quick-connect
terminals (#110)
PCB terminals
SPST-NC
SPST-NO
Separator (Sold Separately), Terminal Connector (Sold Separately)
Refer to "Basic Switch Common Accessories"
2
SS
Subminiature Basic Switch
Ratings
10.1 A
5 A
0.1 A
Actuator
Terminals
Contact Form Maximum Operating Force (OF)
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SPST-NC
SPST-NO
SPDT
SS-10GL2
SS-10GL2-2
SS-10GL2-3
SS-10GL2T
SS-10GL2-2T
SS-10GL2-3T
SS-10GL2D
SS-10GL2-2D
SS-5GL2
SS-5GL2-2
SS-5GL2-3
SS-5GL2T
SS-5GL2-2T
SS-5GL2-3T
SS-5GL2D
SS-5GL2-2D
SS-5GL2-3D
SS-5GL2-F
SS-5GL2-F-2
SS-5GL2-F-3
SS-5GL2-FT
SS-5GL2-F-2T
SS-5GL2-F-3T
SS-5GL2-FD
SS-01GL2
SS-01GL2-2
SS-01GL2-3
SS-01GL2T
SS-01GL2-2T
SS-01GL2-3T
SS-01GL2D
SS-01GL2-2D
SS-01GL2-3D
SS-01GL2-F
SS-01GL2-F-2
SS-01GL2-F-3
SS-01GL2-FT
SS-01GL2-F-2T
SS-01GL2-F-3T
SS-01GL2-FD
SS-01GL2-F-2D
SS-01GL2-F-3D
SS-01GL2-E
SS-01GL2-E-2
SS-01GL2-E-3
SS-01GL2-ET
SS-01GL2-E-2T
SS-01GL2-E-3T
SS-01GL2-ED
SS-01GL2-E-2D
SS-01GL2-E-3D
Solder terminals
Quick-connect
terminals (#110)
0.49 N {50 gf}
0.16 N {16 gf}
0.08 N {8 gf}
PCB terminals
SS-10GL2-3D
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
S
S
Solder terminals
Hinge roller lever
Quick-connect
terminals (#110)
PCB terminals
SS-5GL2-F-2D
SS-5GL2-F-3D
-
-
-
-
-
-
-
-
-
Solder terminals
Quick-connect
terminals (#110)
PCB terminals
SPST-NC
SPST-NO
●Heat Resistant Models
Ratings
10.1 A
SS-10-T
5 A
SS-5-T
0.1 A
SS-01-T
Actuator
Terminals
ContactForm Maximum Operating Force (OF)
Solder terminals
Quick-connect
terminals (#110)
Pin plunger
1.47 N {150 gf}
SS-10T-T
SS-5T-T
SS-01T-T
PCB terminals
Solder terminals
Quick-connect
terminals (#110)
PCB terminals
Solder terminals
Quick-connect
terminals (#110)
PCB terminals
Solder terminals
SS-10D-T
SS-10GL-T
SS-5D-T
SS-5GL-T
SS-01D-T
SS-01GL-T
Hinge lever
0.49 N {50 gf}
SS-10GLT-T
SS-5GLT-T
SS-01GLT-T
SS-10GLD-T
SS-10GL111-T
SS-5GLD-T
SS-5GL111-T
SS-01GLD-T
SS-01GL111-T
Long hinge lever
SPDT
0.39 N {40 gf}
0.49 N {50 gf}
0.49 N {50 gf}
SS-10GL111T-T
SS-5GL111T-T
SS-01GL111T-T
SS-10GL111D-T
SS-10GL13-T
SS-5GL111D-T
SS-5GL13-T
SS-01GL111D-T
SS-01GL13-T
Simulated roller
lever
Quick-connect
terminals (#110)
SS-10GL13T-T
SS-5GL13T-T
SS-01GL13T-T
PCB terminals
Solder terminals
Quick-connect
terminals (#110)
PCB terminals
SS-10GL13D-T
SS-10GL02-T
SS-5GL13D-T
SS-5GL02-T
SS-01GL13D-T
SS-01GL02-T
Hinge roller lever
(Roller material:
stainless steel)
SS-10GL02T-T
SS-10GL02D-T
SS-5GL02T-T
SS-5GL02D-T
SS-01GL02T-T
SS-01GL02D-T
Contact Form
Contact Specifications
●SPDT
●SPST-NC
●SPST-NO
Item
Model SS-10 models SS-5 models SS-01 models
Specification
Rivet
Silver alloy
0.5 mm
20 A max.
15 A max. 10 A max.
Crossbar
Gold alloy
0.25 mm
1 A max.
1 A max.
Contact
Material
Silver
Gap (standard value)
NC
NO
Inrush
COM
NO NC
COM
NC
COM
NO
current
Minimum applicable load
(reference value)*
5 VDC 160 mA
5 VDC 1 mA
*
Please refer to "●Using Micro Loads" in "Precautions" for more
information on the minimum applicable load.
Separator (Sold Separately), Terminal Connector (Sold Separately)
Refer to "Basic Switch Common Accessories"
3
SS
Subminiature Basic Switch
Ratings
Characteristics
Item
Model
SS-10 models
SS-5 models
SS-01 models
Item
Resistive load
10.1 A
Permissible operating speed
0.1 mm to 1 m/s (for pin plunger models)
Model
Rated voltage
Permissible
operating
frequency
Mechanical
Electrical
400 operations/min
SS-10 models 250 VAC
60 operations/min
125 VAC
SS-5 models
5 A
3 A
250 VAC
Insulation resistance
100 MΩ min. (at 500 VDC with insulation tester)
OF 1.47 N models
OF 0.49 N models
OF 0.25 N models
30 m
Ω
max.
50 m
Ω
Ω
Ω
max.
max.
max.
125 VAC
SS-01 models
0.1 A
0.1 A
Contact resistance (initial
value)
-
50 m
Ω
max.
100 m
30 VDC
-
150 m
Note. The above rating values apply under the
following test conditions.
600 VAC
50/60 Hz for
1 min
S
S
Between terminals of the same
polarity
1,000 VAC 50/60 Hz for 1 min
(1) Ambient temperature: 20 2°C
(2) Ambient humidity: 65 5%
(3) Operating frequency: 30 operations/min
Dielectric
strength *1
Between current-carrying metal
parts and ground
1,500 VAC 50/60 Hz for 1 min
1,500 VAC 50/60 Hz for 1 min
Between each terminals and non-
current-carrying metal parts
Approved Safety Standards
Vibration
resistance *2
Malfunction
10 to 55 Hz, 1.5 mm double amplitude
Models shown in the "List of Models" are
1,000 m/s2 {approx. 100G} max.
500 m/s2 {approx. 50G} max.
500 m/s2 {approx. 50G} max.
300 m/s2 {approx. 30G} max.
200 m/s2 {approx. 20G} max.
200 m/s2 {approx. 20G} max.
UL and CSA approved models.
Note. Note that heat resistant models are not
standard approved models.
UL (UL1054)/CSA (CSA C22.2 No.55)
OF 1.47 N models
Durability
OF 0.49 N models
OF 0.25 N models
OF 1.47 N models
Shock
resistance
Malfunction *2 OF 0.49 N models
OF 0.25 N models
Rated voltage Model SS-10 SS-5 SS-01
125 VAC
250 VAC
-
5 A
3 A
0.1 A
-
10,000,000 operations
10.1A
30,000,000 operations min.
Mechanical
min.
(60 operations/min)
30 VDC
-
-
0.1 A
(60 operations/min)
Durability *3
50,000 operations min.
(30 operations/min)
200,000 operations min.
(30 operations/min)
Electrical
Consult your OMRON sales
representative for specific models
with VDE standard approvals.
VDE (EN61058-1)
Degree of protection
IEC IP40
Degree of protection against electric shock
Proof tracking index (PTI)
Class I
175
-25°C to
+
85°C (at ambient humidity of 60% max.)
(with no icing or condensation)
85% max. (for 5°C to 35°C)
Approx. 1.6g (pin plunger models)
Rated voltage Model SS-10
250 VAC 10 A
SS-5
5 A
Ambient operating temperature
Ambient operating humidity
Weight
+
+
Testing conditions: 5E4 (50,000 operations)
T85 (0°C to 85°C)
Note. The data given above are initial values.
*1. The values for dielectric strength shown are for models with a Separator (refer to "Micro Switch
Common Accessories").
*2. The values are at Free Position and Total Travel Position values for pin plunger, and Total Travel
Position value for lever. Close or open circuit of the contact is 1ms max.
*3. For testing conditions, consult your OMRON sales representative.
Terminals/Appearances (Unit: mm)
●Solder terminals
●Quick connect terminals (#110)
●PCB terminals
2.9
2.9
2.9
3.3
6.4
0.6
7.0
10.6
7.1
3-1.2
dia. holes
0.5
1.6
0.5
3-1.6 dia. holes
1.6
8.8
7.3
0.5
0.5
1.2
8.8
9.5
3.2
6.4
7.3
1.6
0.1
8.8
9.5
2.8
0.1
9.5
7.3
19.8
19.8
0.1
3.2
t=0.5
3.2
19.8
<PCB Mounting Dimensions (Reference)>
3-1.35~1.5 dia.
+0.15
8.8
-0.05
(1.6)
0.1
16.1
Mounting Holes (Unit: mm)
2-2.4 dia. mounting holes
or M2.3 screw holes
0.1
9.5
4
SS
Subminiature Basic Switch
Dimensions (Unit: mm) and Operating Characteristics
The illustrations and drawings are for solder terminals models.
Refer to "Terminals/Appearances" of the previous page for details on models with quick connect terminals (#110) or PCB terminals.
7.5
●Pin plunger
SS-10
3.2
PT
2
A
SS-5 (-F)
SS-01 (-E, -F)
+0.075
2.35
-0.05
OP
2.9
10.2
9.5
6.4
2.5
2.5
2.35-0.05
0.5
+0.075 dia. holes
0.07
dia.
3-1.6 dia. holes
S
S
3.2
6.4
1.6
8.8
9.5
7.3
0.1
5.1
19.8
Model
SS-5
SS-01
SS-5-F
SS-01-F
SS-10
SS-01-E
Operating Characteristics
Operating Force
Releasing Force
OF Max. 1.47 N {150 gf} 1.47 N {150 gf} 0.49 N {50 gf} 0.25 N {25 gf}
RF Min. 0.25 N {25 gf} 0.25 N {25 gf}
0.04 N {4 gf}
0.02 N {2 gf}
Pretravel
Overtravel
Movement Differential MD Max.
PT Max.
OT Min.
0.6 mm
0.4 mm
0.12 mm
0.5 mm
0.5 mm
0.1 mm
0.5 mm
0.5 mm
0.1 mm
0.5 mm
0.5 mm
0.1 mm
Operating Position
OP
8.4 0.5 mm
A
14.5
●Hinge lever
SS-10GL
t=0.3*
3.6
SS-5GL (-F)
SS-01GL (-E, -F)
FP
+0.075
2.35
-0.05
OP
10.2
9.5
2.9
6.4
2.5
2.35 -0.05
0.5
+0.075 dia. holes
0.07
2.5
dia.
3-1.6 dia. holes
3.2
6.4
1.6
8.8
9.5
7.3
Note. The indicated reference values of RF are for cases
where the lever weight is not applied to the plunger.
0.1
5.1
19.8
* Stainless-steel lever
Model
SS-5GL
SS-01GL
SS-5GL-F
SS-01GL-F
SS-10GL
SS-01GL-E
Operating Characteristics
Operating Force
Releasing Force
OF Max. 0.49 N {50 gf} 0.49 N {50 gf} 0.16 N {16 gf}
RF Min. 0.06 N {6 gf} 0.06 N {6 gf} 0.02 N {2 gf}
0.08 N {8 gf}
0.01 N {1 gf}
(reference value)
Overtravel
Movement Differential MD Max.
OT Min.
1.0 mm
1.0 mm
1.2 mm
0.8 mm
1.2 mm
0.8 mm
1.2 mm
0.8 mm
Free Position
Operating Position
FP Max.
OP
13.6 mm
8.8 0.8 mm
t=0.3*
A
●Long hinge lever
SS-10GL111
22.6
3.6
SS-5GL111 (-F)
SS-01GL111 (-E, -F)
+0.075
2.35
FP
-0.05
OP
10.2
9.5
2.9
C
NC
NO
6.4
2.5
2.35-0.05
0.5
+0.075 dia. holes
0.07
2.5
dia.
1.6
3-1.6 dia. holes
3.2
6.4
8.8
9.5
7.3
0.1
5.1
Note. The indicated reference values of RF are for cases
where the lever weight is not applied to the plunger.
19.8
* Stainless-steel lever
Model
SS-5GL111
SS-01GL111 SS-01GL111-F
SS-5GL111-F
SS-10GL111
SS-01GL111-E
Operating Characteristics
Operating Force
Releasing Force
OF Max. 0.39 N {40 gf} 0.39 N {40 gf}
0.12 N {12 gf}
0.02 N {2 gf}
(reference value)
0.06 N {6 gf}
0.003 N {0.3 gf}
(reference value)
RF Min.
0.03 N {3 gf}
0.03 N {3 gf}
Overtravel
Movement Differential MD Max.
OT Min.
1.2 mm
1.2 mm
1.2 mm
1.2 mm
1.2 mm
1.2 mm
1.2 mm
1.2 mm
Free Position
FP Max.
OP
16.8 mm
8.8 1.5 mm
Operating Position
8.8 2 mm
Note 1. Unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions.
Note 2. The operating characteristics are for operation in the A direction ( ).
5
SS
Subminiature Basic Switch
A
●Simulated roller lever
SS-10GL13
15.8
R1.3
t=0.3*
3.6
SS-5GL13 (-F)
SS-01GL13 (-E, -F)
FP
+0.075
OP
2.35
-0.05
10.2
9.5
2.9
6.4
2.5
2.5
2.35 -0.05
0.5
+0.075 dia. holes
0.07
dia.
3-1.6 dia. holes
3.2
6.4
1.6
8.8
9.5
7.3
Note. The indicated reference values of RF are for cases
where the lever weight is not applied to the plunger.
0.1
5.1
* Stainless-steel lever
S
S
19.8
Model
SS-5GL13
SS-01GL13
SS-5GL13-F
SS-01GL13-F
SS-10GL13
SS-01GL13-E
Operating Characteristics
Operating Force
Releasing Force
OF Max.
RF Min.
0.49 N {50 gf} 0.49 N {50 gf}
0.16 N {16 gf}
0.02 N {2 gf}
0.08 N {8 gf}
0.01 N {1 gf}
0.06 N {6 gf}
0.06 N {6 gf}
(reference value)
Overtravel
Movement Differential MD Max.
OT Min.
1.0 mm
1.0 mm
1.2 mm
0.8 mm
1.2 mm
0.8 mm
1.2 mm
0.8 mm
Free Position
FP
Max.
15.5 mm
Operating Position
OP
10.7 0.8 mm
●Hinge roller lever
SS-10GL2
A
14.5
*2
4.8x3.2 dia.
SS-5GL2 (-F)
t=0.3 *1
SS-01GL2 (-E, -F)
FP
OP
+0.075
2.35
-0.05
10.2
9.5
2.9
6.4
2.5
2.5
+0.075
2.35
0.5
dia. holes
-0.05
0.07
dia.
3-1.6 dia. holes
3.2
6.4
1.6
8.8
7.3
Note. The indicated reference values of RF are for cases
where the lever weight is not applied to the plunger.
0.1
9.5
19.8
5.1
*1. Stainless-steel lever
*2. Polyacetal resin roller
Model
SS-5GL2
SS-01GL2
SS-5GL2-F
SS-01GL2-F
SS-10GL2
SS-01GL2-E
Operating Characteristics
0.49 N {50 gf}
0.06 N {6 gf}
0.49 N {50 gf}
0.06 N {6 gf}
0.16 N {16 gf}
0.02 N {2 gf}
0.08 N {8 gf}
0.01 N {1 gf}
(reference value)
Operating Force
Releasing Force
OF Max.
RF Min.
Overtravel
Movement Differential MD Max.
OT Min.
1.0 mm
1.0 mm
1.2 mm
0.8 mm
1.2 mm
0.8 mm
1.2 mm
0.8 mm
Free Position
Operating Position
FP
OP
Max.
19.3mm
14.5 0.8mm
Note 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
Note 2. The operating characteristics are for operation in the A direction ( ).
6
SS
Subminiature Basic Switch
Precautions
★Please refer to "Common Precautions" for correct use.
Cautions
Correct Use
●Soldering
●Mounting
• Complete the soldering at the iron tip temperature below
350°C within 5 seconds, and do not apply any external force
for 1 minute after soldering. Soldering at an excessively high
temperature or soldering for more than 5 seconds may
deteriorate the characteristics of the Switch.
• Use M2.3 mounting screw with plane washers or spring
washers to securely mount the Switch. Tighten the screws to a
torque of 0.23 to 0.26 N·m {2.3 to 2.7 kgf·cm}.
• Mount the Switch onto a flat surface. Mounting on an uneven
surface may cause deformation of the Switch, resulting in
faulty operation or breakage in the housing.
S
S
• Be sure to apply only the minimum required amount of flux.
Switch may have contact failures if flux intrudes into the
interior of the Switch.
●Using Micro Loads
Using a model for ordinary loads to open or close the contact of
a micro load circuit may result in faulty contact. Use models that
operate in the following range. However, even when using micro
load models within the following operating range, if inrush
current occurs when the contact is opened or closed, it may
increase the contact wear and so decrease durability. Therefore,
insert a contact protection circuit where necessary. The N-level
reference value applies for the minimum applicable load. This
value indicates the malfunction reference level for the reliability
level of 60% (λ60).
• If the PCB terminal models are soldered in the solder bath, flux
will permeate inside the Switch and cause contact failure.
Therefore, manually solder the PCB terminal.
(JIS C5003)
The equation, λ60=0.5×10-6/operation indicates that the
1
estimated malfunction rate is less than
a reliability level of 60%.
operations with
2,000,000
0.16mA
26 mA 100 mA
30
24
Operating
range for
general-load
models
Operating range for
micro-load model
SS-01
SS-5
SS-10
12
5
0
1 mA
100 mA 160mA
0.1
1
10
100
1,000
Current (mA)
7
SS
Subminiature Basic Switch
S
S
• Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product.
• Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad
systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious
influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or
equipment, and be sure to provide the system or equipment with double safety mechanisms.
Note: Do not use this document to operate the Unit.
OMRON Corporation
ELECTRONIC AND MECHANICAL COMPONENTS COMPANY
Contact: www.omron.com/ecb
Cat. No.B032-E1-13
0812(0207)(O)
8
相关型号：
©2020 ICPDF网 联系我们和版权申明