SS-5 [OMRON]
Snap Action Switch; 速动开关
| 型号： | SS-5 |
| 厂家： | 
OMRON ELECTRONICS LLC |
| 描述： | Snap Action Switch |
| 文件： | 总10页 (文件大小：671K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SSnaSp Action Switch
Subminiature Snap Action Switch
• Economical, subminiature snap action switch offers long
service life (30 million operations minimum)
• All models are free from overtravel restrictions, permit easy
setting
• Wide switching capacity range from microvoltage/current
loads (1 mA at 5 VDC to high-capacity loads 10.1 A at 250
VAC)
• Standard operating force, low force or super-low force
models available
• RoHS Compliant
Ordering Information
PCB terminal
Soldered
terminal
Tab (#110)
terminal
Contact
Rating
Actuator
OF
Straight
SS-01-ED
Left-angled
Right-angled
0.1 A
Pin plunger
25 g
—
—
SS-01-E
SS-01-F
SS-01-ET
SS-01-FT
50 g
150 g
8 g
SS-01-FD
—
—
SS-01D
SS-01D1
SS-01D2
SS-01
SS-01T
Hinge lever
SS-01GL-ED
SS-01GL-FD
SS-01GLD
—
—
SS-01GL-E
SS-01GL-F
SS-01GL
SS-01GL-ET
SS-01GL-FT
SS-01GLT
16 g
50 g
8 g
—
—
SS-01GLD1
SS-01GLD2
Simulated roller
lever
SS-01GL13-ED
SS-01GL13-FD
SS-01GL13D
SS-01GL2-ED
SS-01GL2-FD
SS-01GL2D
SS-5-FD
—
—
SS-01GL13-E
SS-01GL13-F
SS-01GL13
SS-01GL2-E
SS-01GL2-F
SS-01GL2
SS-5-F
SS-01GL13-ET
SS-01GL13-FT
SS-01GL13T
SS-01GL2-ET
SS-01GL2-FT
SS-01GL2T
SS-5-FT
16 g
50 g
8 g
—
—
—
—
Hinged roller
lever
—
—
—
—
16 g
50 g
50 g
—
—
5 A
Pin plunger
Hinge lever
SS-5-FD1
SS-5-FD2
150 g
16 g
50 g
16 g
SS-5D
SS-5D1
SS-5GL-FD1
SS-5GLD1
—
SS-5D2
SS-5GL-FD2
SS-5GLD2
SS-5
SS-5T
SS-5GL-FD
SS-5GLD
SS-5GL-F
SS-5GL
SS-5GL-FT
SS-5GLT
Simulated roller
lever
SS-5GL13-FD
SS-5GL13-FD2
SS-5GL13-F
SS-5GL13-FT
50 g
16 g
50 g
SS-5GL13D
SS-5GL2-FD
SS-5GL2D
SS-5GL13D1
SS-5GL2-FD1
SS-5GL2D1
SS-5GL13D2
SS-5GL2-FD2
SS-5GL2D2
SS-5GL13
SS-5GL2-F
SS-5GL2
SS-5GL13T
SS-5GL2-FT
SS-5GL2T
Hinge roller
lever
10 A
Pin plunger
Hinge lever
150 g
50 g
50 g
SS-10D
SS-10GLD
SS-10GL13D
—
—
—
—
—
—
SS-10
SS-10T
SS-10GLT
SS-10GL13T
SS-10GL
SS-10GL13
Simulated roller
lever
Hinge roller
lever
50 g
SS-10GL2D
—
—
SS-10GL2
SS-10GL2T
Snap Action Switch SS
95
Model Number Legend
SS-
1 2 3 4 5
(see note)
3. Maximum Operating Force
5. Terminals
None: Solder terminals
1. Ratings
None: 150 gf
-F:
-E:
10:
5:
10.1 A at 125 VAC
5 A at 125 VAC
0.1 A at 30 VDC
T:
Quick-connect terminals (#110)
Straight PCB terminals
50 gf (0.1A and 5A versions)
25 gf (0.1A versions)
D:
01:
D1:
D2:
Left-angled PCB terminals
Right-angled PCB terminals
2. Actuator
None: Pin plunger
GL: Hinge lever
4. Contact Form
None: SPDT
Note: These OF values are for the pin plunger models.
-2:
-3:
SPST-NC
SPST-NO
Consult Omron regarding the following:
- SPST-NC and SPST-NO versions
- High temperature versions that are rated from -25°C to 120°C
- Left and Right angled PCB terminal versions
GL13: Simulated roller lever
GL2: Hinge roller lever
Specifications
■ Characteristics
Operating speed
0.1 mm to 1 m/second (pin plunger models)
Operating frequency
Mechanical: 400 operations per minute max.
Electrical: 30 operations per minute max.
Insulation resistance
Contact resistance
100 MΩ at 500 VDC
150 gf: SS-10, SS-5 models:
SS-01 models:
30 mΩ max.
50 mΩ max.
50 mΩ max.
100 mΩ max.
150 mΩ max.
50 gf:
SS-5 models:
SS-01 models
SS-01 models
25 gf:
Dielectric strength (See note 2)
1,000 VAC (600 VAC for SS-01), 50/60 Hz for 1 minute between terminals of same polarity
1,500 VAC, 50/60 Hz for 1 minute between current-carrying metal parts and ground and between each
terminal and noncurrent-carrying metal parts
Vibration resistance (see note 3)
Shock resistance (see note 3)
Malfunction: 10 to 55 Hz, 1.5 mm double amplitude
150 gf:
Destruction: 1,000 m/s2 (approx. 100G) max.
Malfunction: 300 m/s2 (approx. 30G) max.
Destruction: 500 m/s2 (approx. 50G) max.
Malfunction: 200 m/s2 (approx. 20G) max.
50 gf and 25gf:
Degree of protection
IEC IP40
Class I
Degree of protection against
electric shock
Proof tracking index (PTI)
Ambient operating temperature
Ambient operating humidity
Service life
175
-25° to 85°C (at 60% RH max.) with no icing
85% max. (for 5°C to 35°C)
Mechanical:
30 million operations min. at 60 operations per minute (SS-01, SS-5)
10 million operations min. at 60 operations per minute (SS-10)
Electrical:
200,000 operations min. at 30 operations per minute (SS-01, SS-5)
50,000 operations min. at 30 operations per minute (SS-10)
Weight
Approx. 1.6 g pin plunger type
Note: 1. Data shown are of initial value.
2. The dielectric strength values shown is measured using a separator between the switch and metal mounting plate.
3. For pin plunger models, the above value apply for use at the free position and total travel position. For the lever models, the values apply
at the total travel position.
96
Snap Action Switch SS
■ Ratings (reference values)
Switch series:
SS-10 and SS-5
Lamp load Inductive load
SS-01
Resistive load
NC NO
5 A (10.1A)
Motor load
Resistive Load
Contact form
125 VAC
250 VAC
8 VDC
NC
1.5 A
1 A
NO
NC
NO
NC
NO
NC
NO
0.7 A
0.5 A
3 A
2 A
2.5 A
1.5 A
1.3 A
0.8 A
0.1 A
- - -
3 A (10.1A)
5 A (10.1A)
5 A (10.1A)
4 A
2 A
2 A
5 A
4 A
3 A
3 A
0.1 A
0.1 A
0.1 A
- - -
14 VDC
4 A
3 A
30 VDC
2 A
3 A
125 VDC
250 VDC
0.4 A
0.05 A
0.03 A
0.4 A
0.2 A
0.05 A
0.03 A
0.2 A
- - -
Note: 1. Data in parentheses apply to the SS-10 models only.
2. The above current ratings are the values of the steady-state current.
3. Inductive load has a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC). The inductive load rating of the SS-10 is the
same as that of SS-5.
4. Lamp load has an inrush current of 10 times the steady-state current
5. Motor load has an inrush current of 6 times the steady-state current.
6. If the switch is used in a DC circuit and is subjected to inrush current or surge, connect a surge suppressor across the switch.
7. The electrical rating applies under the following test conditions:
Ambient Temperature = 20±2°C, Ambient Humidity = 65±5%, Operating frequency = 30 operations/minute
■ Approved Standards
■ Contact Specifications
UL Recognized (File No. E41515)
CSA Certified (File No. LR21642)
Item
Specification
Material
Gap (standard value)
Inrush current
SS-10
SS-5
SS-01
Rivet
Silver alloy
0.5 mm
NC: 20A max. NC: 20A max.
NO: 15A max. NO: 10A max.
Crossbar
Gold alloy
0.25 mm
Rated Voltage
125 VAC
SS-10
- - -
SS-5
5 A
SS-01
0.1 A
- - -
Silver
250 VAC
10.1 A
- - -
3 A
1A max.
30 VDC
- - -
0.1 A
Minimum applicable
load (see note)
160 mA at 5 VDC
1 mA at 5 VDC
EN61058-1 - - VDE approval
(File No. 129246 for SS-5, 125256 for SS-10)
Note: Minimum applicable loads are indicated by N standard refer-
ence values. This value represents the failure rate at a 60%
(λ60) reliability level (JIS C5003).
Rated Voltage
SS-10
SS-5
250 VAC
10.1 A
5 A
-6
The equation λ60=0.5 x 10 / operations indicates that a failure
rate of 1/2,000,000 operations can be expected at a reliability
level of 60%
EN61058-1 - - TÜV Rheinland approval
(File No. J9451450)
Rated Voltage
SS-10
SS-5
250 VAC
10.1 A
5 A
Testing conditions: 5E4 (50,000 operations), T85 (0°C to 85°C)
Note: The rated values approved by each of the safety standards
(e.g. UL, CSA) may be different from the performance charac-
teristics individually defined in this catalog.
Snap Action Switch SS
97
Engineering Data
■ Mechanical Service Life
■ Electrical Service Life
SS-01, SS-5 Models
SS-5 Models
(Pin Plunger Models)
(Pin Plunger Models)
5,000
Ambient temperature: 20 2°C
Ambient humidity: 65 5%
Operating frequency: 30 operations/min
Ambient temperature: 20 2°C
Ambient humidity: 65 5%
Without load
3,000
40,000
cosφ = 1
Operating frequency: 60 operations/min
1,000
30,000
20,000
10,000
5,000
125 VAC
500
300
250 VAC
100
50
30
10
0
1
2
3
4
5
6
7
0.1
0.2
0.3
0.4
0.5
0.6
0.7
Overtravel (mm)
Switching current (A)
■ Mounting
■ Contact Form
Panel Mounting
SPDT
SPST-NC
SPST-NO
All switches may be panel mounted using M2.3 mounting screws with
plane washers or spring washers to securely mount the switch.
Tighten the screws to a torque of 0.23 to 0.26 N·m.
Two, 2.4-dia. mounting holes or
M2.3 screw holes
COM
NO
NC
COM
NC
COM
NO
* Consult Omron for SPST-NC and SPST-NO contact form types
ordering information.
9.5 0.1
PCB Layout
Three, 1.35 to 1.5 dia.
(1.6)
+0.15
–0.05
8.8
16.1 0.1
98
Snap Action Switch SS
Dimensions
■ Terminals
Note: 1. Unless otherwise specified, all units are in millimeters and a tolerance of ±0.4 mm applies to all dimensions
2. Terminal plate thickness is 0.5 mm for all models.
Quick-connect Terminals (#110)
Solder Terminals
PCB Terminals
0.6
2.9
3.3
2.9
1.6
2.9
7.0
6.4
10.6
7.1
1.6
0.5
3.2
8.8
7.3
1.2
2.8
8.8
7.3
1.6
Three,
1.6-dia. holes
8.8
7.3
COM
terminal
(C)
9.5 0.1
COM
terminal
(C)
3.2
6.4
9.5 0.1
3.2
19.8
t = 0.5
9.5 0.1
19.8
Three, 1.2 dia.
19.8
NO terminal
COM terminal (C)
NC terminal
NO terminal
NC terminal
NO terminal
NC terminal
Note:Terminal plate thickness is 0.5 mm for all models.
PCB, Left-angled terminal
PCB, Right-angled terminal
Note: Angled terminal directions
are shown below.
Left-angled terminal
Right-angled terminal
COM
terminal
COM
terminal
NC
terminal
NC terminal
NO terminal
NO terminal
■ Dimensions and Operating Characteristics
Note: 1. Unless otherwise specified, all units are in millimeters and a tolerance of ±0.4 mm applies to all dimensions
2. The following illustrations and dimensions are for solder terminal models.
Refer to “Terminals” for models with quick-connect terminals (#110) or PCB terminals.
3. The operating characteristics are for operation in the A direction(
)
Pin Plunger Models
7.5
PT
3.2
SS-01(-E, -F)
2
SS-5(-F)
SS-10
A
OP
9.5
10.2
2.9
2.5
6.4
6.4
2.5 0.07 dia.
1.6
3.2
6.4
e, 1.6 dia.
8.8
7.3
5.1 9.5 0.1
19.8
Characteristics
Part number
SS-01-E
25 g
2 g
0.5 mm
0.5 mm
0.1 mm
SS-01-F, SS-5-F
50 g
SS-01, SS-5
150 g
SS-10
150 g
25 g
0.6 mm
0.4 mm
0.12 mm
OF max.
RF min.
PT max.
OT min.
MD max.
OP
4 g
0.5 m
0.5 mm
0.1 mm
25 g
0.5 mm
0.5 mm
0.1 mm
8.4 0.5 mm
Snap Action Switch SS
99
Hinge Lever Models
SS-01GL(-E, -F)
SS-5GL(-F)
SS-10GL
A
14.5 (see note 2)
t = 0.3
3.6
FP
OP
9.5
10.2
2.5
2.9
6.4
2.5 0.07 dia.
1.6
e, 1.6 dia.
3.2
6.4
8.8
7.3
5.1 9.5 0.1
19.8
Note: 1. Stainless-steel lever
2. Besides the SS- GL models with a hinge lever length of 14.5, the SS- GL11 models with a hinge lever length of 18.5, the
SS- GL111 models with a hinge lever length of 22.6, and the SS- GL1111 models with a hinge lever length of 37.8 are available.
Contact your OMRON representative for these models
Characteristics
OF max.
RF min.
OT min.
MD max.
FP max.
OP
SS-01GL-E
8 g
1 g
1.2 mm
0.8 mm
SS-01GL-F, SS-5GL-F
SS-01GL, SS-5GL
SS-10GL
50 g
6 g
1.0 mm
1.0 mm
16 g
2 g
1.2 mm
0.8 mm
50 g
6 g
1.2 mm
0.8 mm
13.6 mm
8.8 0.8 mm
Simulated Roller Lever Models
SS-01GL13(-E, -F)
SS-5GL13(-F)
SS-10GL13
A
15.8
1.3R
3.6
t = 0.3
(see note)
FP
OP
10.2
9.5
2.5
2.9
6.4
ee, 1.6 dia.
2.5 0.07 dia.
1.6
3.2
6.4
8.8
7.3
5.1 9.5 0.1
Note: Stainless-steel spring lever
19.8
Characteristics
OF max.
RF min.
OT min.
MD max.
FP max.
OP
SS-10GL13-E
8 g
SS-10GL13-F, SS-5GL13-F
SS-01GL13, SS-5GL13
SS-10GL13
50 g
6 g
1.0 mm
1.0 mm
16 g
2 g
1.2 mm
0.8 mm
50 g
6 g
1.2 mm
0.8 mm
1 g
1.2 mm
0.8 mm
15.5 mm
10.7±0.8 mm
Hinge Roller Lever Models
SS-01GL2(-E, -F)
SS-5GL2(-F)
SS-10GL2
14.5
48 da. × 3.2
ote 2)
A
t = 0.3
(see note 1)
FP
OP
9.5
10.2
2.5
2.9
6.4
2.5 0.07 dia.
1.6
ee, 1.6 dia.
3.2
6.4
8.8
7.3
5.1 9.5 0.1
Note: 1. Stainless-steel spring lever
19.8
2. Polyacetal resin roller
Characteristics
OF max.
RF min.
OT min.
MD max.
FP max.
OP
SS-01GL2-E
8 g
1 g
1.2 mm
0.8 mm
SS-01GL2-F, SS-5GL2-F
SS-01GL2, SS-5GL2
SS-10GL2
16 g
2 g
1.2 m
0.8 mm
50 g
6 g
1.2 mm
0.8 mm
50 g
6 g
1.0 mm
1.0 mm
19.3 mm
14.5 0.8 mm
100
Snap Action Switch SS
Precautions
Be sure to read the precautions and information common to all Snap Action and Detection Switches, contained in the Technical User’s Guide,
“Snap Action Switches, Technical Information” for correct use.
■ Correct Use
■ Cautions
Mounting
Handling
Mount the switch onto a flat surface. Mounting on an uneven surface
may cause deformation of the switch, resulting in faulty operation or
breakage in the housing.
Turn OFF the power supply before mounting or removing the switch,
wiring, or performing maintenance for inspection. Failure to do so
may result in electric shock or burning
Operating Stroke
Terminal Connection
Take particular care in setting the operating stroke for the pin plunger
models. Make sure that the operating stroke is 70% to 100% of the
rated OT distance. Do not operate the actuator exceeding the OT dis-
tance, otherwise the life expectancy of the switch may be shortened.
When soldering the lead wire to the terminal, first insert the lead wire
conductor through the terminal hole and then solder.
Make sure that the capacity of the soldering iron is 60 W maximum.
Do not take more than 5 seconds to solder the switch terminal.
Improper soldering involving an excessively high temperature or
excessive soldering time may deteriorate the characteristics of the
switch.
Using Microloads
Using a model for ordinary loads to switch microloads may result in
faulty operation. Instead, use the models that are designed for
microloads and that operate in the following range;
Be sure to apply only the minimum required amount of flux. The
switch may have contact failures if flux intrudes in the interior of the
switch.
Use the following lead wires to connect to the solder terminals;
26mA 100mA
0.16mA
30
24
Model
SS-5
Conductor size
0.5 to 0.75 mm2
0.75 mm2
SS-10
If the PCB terminal models are soldered in a solder bath, flux will per-
meate inside the switch and cause contact failure. Therefore, manu-
ally solder the PCB terminal.
Wire the quick-connect terminals (#110) with receptacles. Insert the
terminals straight into the receptacles. Do not impose excessive
force on the terminal in the horizontal direction, otherwise the termi-
nal may be deformed or the housing may be damaged.
12
Inoperable
range
5
0
1mA
1
100mA
160mA
Insulation Distance
10
100
1,000
Use a separator between the switch and metal mounting panels, to
ensure proper dielectric characteristics are achieved.
Current (mA)
However, even when using microload models within the operating
range shown above, if inrush current or inductive voltage spikes
occur when the contact is opened or closed, then contact wear may
increase and so decrease the service life. Therefore, insert a contact
protection circuit where necessary.
According to EN61058-1, the minimum insulation thickness for this
switch should be 1.1 mm and minimum clearance distance between
the terminal and mounting plate should be 1.6 mm. If the insulation
distance cannot be provided in the product incorporating the switch,
either use a switch with insulation barrier or use a separator to
ensure sufficient insulation distance.
Separator
Snap Action Switch SS
101
MEMO
102
Snap Action Switch SS
(b) Use in consumer Products or any use in significant quantities.
(c) Energy control systems, combustion systems, railroad systems, aviation systems,
medical equipment, amusement machines, vehicles, safety equipment, and
installations subject to separate industry or government regulations.
(d) Systems, machines, and equipment that could present a risk to life or property.
3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING
SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE
PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE
WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED
VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY
SELLER.
5. Programmable Products: Seller shall not be responsible for the Buyer's programming of
a programmable Product.
Omron Electronic Components, LLC
Terms and Conditions of Sales
I. GENERAL
1. Definitions: The words used herein are defined as follows.
(a) Terms:
(b) Seller:
(c) Buyer:
These terms and conditions
Omron Electronic Components LLC and its subsidiaries
The buyer of Products, including any end user in section III through VI
(d) Products: Products and/or services of Seller
(e) Including: Including without limitation
2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments,
invoices, purchase orders and other documents, whether electronic or in writing, relating
to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's
purchase order or other documents which are inconsistent with, or in addition to, these
Terms.
3. Distributor: Any distributor shall inform its customer of the contents after and including
section III of these Terms.
IV. WARRANTY AND LIMITATION
1. Warranty: Seller's exclusive warranty is that the Products will be free from defects in
materials and workmanship for a period of twelve months from the date of sale by Seller
(or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY
OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES,
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE OF THE PRODUCTS.
2. Buyer Remedy: Seller's sole obligation hereunder shall be to replace (in the form
originally shipped with Buyer responsible for labor charges for removal or replacement
thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an
amount equal to the purchase price of the Product; provided that there shall be no
liability for Seller or its affiliates unless Seller's analysis confirms that the Products were
correctly handled, stored, installed and maintained and not subject to contamination,
abuse, misuse or inappropriate modification. Return of any Products by Buyer must be
approved in writing by Seller before shipment.
3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED
WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT,
WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL
LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF
THE PRODUCT ON WHICH LIABILITY IS ASSERTED.
4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and its
employees from and against all liabilities, losses, claims, costs and expenses (including
attorney's fees and expenses) related to any claim, investigation, litigation or proceeding
(whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or
omissions under these Terms or in any way with respect to the Products.
II. SALES
1. Prices; Payment: All prices stated are current, subject to change without notice by Seller.
Buyer agrees to pay the price in effect at the time the purchase order is accepted by
Seller. Payments for Products received are due net 30 days unless otherwise stated in
the invoice. Buyer shall have no right to set off any amounts against the amount owing in
respect of this invoice.
2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to
Buyer after deducting transportation charges, taxes and duties, and will be allowed only
if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past
due amounts owing to Seller.
3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the maximum
legal rate, whichever is less, on any balance not paid within the stated terms.
4. Orders: Seller will accept no order less than 200 U.S. dollars net billing.
5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer
shall make remittance to Seller at the then current exchange rate most favorable to
Seller; provided that if remittance is not made when due, Buyer will convert the amount
to U.S. dollars at the then current exchange rate most favorable to Seller available
during the period between the due date and the date remittance is actually made.
6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining
any government approvals regarding the importation or sale of the Products.
7. Taxes: All taxes, duties and other governmental charges (other than general real
property and income taxes), including any interest or penalties thereon, imposed directly
or indirectly on Seller or required to be collected directly or indirectly by Seller for the
manufacture, production, sale, delivery, importation, consumption or use of the Products
sold hereunder (including customs duties and sales, excise, use, turnover and license
taxes) shall be charged to and remitted by Buyer to Seller.
V. INFORMATION; ETC.
1. Intellectual Property: The intellectual property embodied in the Products is the exclusive
property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way
without the written permission of Seller. Buyer (at its own expense) shall indemnify and
hold harmless Seller and defend or settle any action brought against Seller to the extent
that it is based on a claim that any Product made to Buyer specifications infringed
intellectual property rights of another party.
2. Property; Confidentiality: Notwithstanding any charges to Buyer for engineering or
tooling, all engineering and tooling shall remain the exclusive property of Seller. All
information and materials supplied by Seller to Buyer relating to the Products are
confidential and proprietary, and Buyer shall limit distribution thereof to its trusted
employees and strictly prevent disclosure to any third party.
3. Performance Data: Performance data is provided as a guide in determining suitability
and does not constitute a warranty. It may represent the result of Seller's test conditions,
and the users must correlate it to actual application requirements.
4. Change In Specifications: Product specifications and descriptions may be changed at
any time based on improvements or other reasons. It is Seller’s practice to change part
numbers when published ratings or features are changed, or when significant
engineering changes are made. However, some specifications of the Product may be
changed without any notice.
8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to Seller,
Seller reserves the right to stop shipments or require satisfactory security or payment in
advance. If Buyer fails to make payment or otherwise comply with these Terms or any
related agreement, Seller may (without liability and in addition to other remedies) cancel
any unshipped portion of Products sold hereunder and stop any Products in transit until
Buyer pays all amounts, including amounts payable hereunder, whether or not then due,
which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid
accounts.
9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer
indemnifies Seller fully against all costs or expenses arising in connection therewith.
10. Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting from
causes beyond its control, including earthquakes, fires, floods, strikes or other labor
disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots,
delay in or lack of transportation or the requirements of any government authority.
11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller:
(a) All sales and shipments of Products shall be FOB shipping point (unless otherwise
stated in writing by Seller), at which point title to and all risk of loss of the Products
shall pass from Seller to Buyer, provided that Seller shall retain a security interest in
the Products until the full purchase price is paid by Buyer;
5. Errors And Omissions: The information on Seller’s website or in other documentation
has been carefully checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
6. Export Controls: Buyer shall comply with all applicable laws, regulations and licenses
regarding (a) export of the Products or information provided by Seller; (b) sale of
Products to forbidden or other proscribed persons or organizations; (c) disclosure to non-
citizens of regulated technology or information.
(b) Delivery and shipping dates are estimates only; and
(c) Seller will package Products as it deems proper for protection against normal
handling and extra charges apply to special conditions.
12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products
occurring before delivery to the carrier or any claim related to pricing or other charges
must be presented in detail in writing to Seller within 30 days of receipt of shipment.
III. PRECAUTIONS
VI. MISCELLANEOUS
1. Suitability: IT IS THE BUYER’S SOLE RESPOINSIBILITY TO ENSURE THAT ANY
OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE
APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING
APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE
BUYER’S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC
COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E)
SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT.
Buyer acknowledges that it alone has determined that the Products will meet their
requirements of the intended use in all cases. Buyer must know and observe all
prohibitions of use applicable to the Product/s.
1. Waiver: No failure or delay by Seller in exercising any right and no course of dealing
between Buyer and Seller shall operate as a waiver of rights by Seller.
2. Assignment: Buyer may not assign its rights hereunder without Seller's written consent.
3. Law: These Terms are governed by Illinois law (without regard to conflict of laws).
Federal and state courts in Cook County, Illinois have exclusive jurisdiction for any
dispute hereunder.
4. Amendment: These Terms constitute the entire agreement between Buyer and Seller
relating to the Products, and no provision may be changed or waived unless in writing
signed by the parties.
5. Severability: If any provision hereof is rendered ineffective or invalid, such provision shall
not invalidate any other provision.
2. Use with Attention: The followings are some examples of applications for which
particular attention must be given. This is not intended to be an exhaustive list of all
possible use of any Product, nor to imply that any use listed may be suitable for any
Product:
(a) Outdoor use, use involving potential chemical contamination or electrical
interference.
Snap Action Switch SS
Certain Precautions on Specifications and Use
1. Suitability for Use. Seller shall not be responsible for conformity with any stan- 2. Programmable Products. Seller shall not be responsible for the user's pro-
dards, codes or regulations which apply to the combination of the Product in
gramming of a programmable product, or any consequence thereof.
Buyer's application or use of the Product. At Buyer's request, Seller will pro- 3. Performance Data. Performance data given in this publication is provided as
vide applicable third party certification documents identifying ratings and limi-
tations of use which apply to the Product. This information by itself is not
sufficient for a complete determination of the suitability of the Product in com-
bination with the end product, machine, system, or other application or use.
a guide for the user in determining suitability and does not constitute a war-
ranty. It may represent the result of Seller's test conditions, and the users must
correlate it to actual application requirements. Actual performance is subject to
Seller's Warranty and Limitations of Liability.
Buyer shall be solely responsible for determining appropriateness of the par- 4. Change in Specifications. Product specifications and accessories may be
ticular Product with respect to Buyer's application, product or system. Buyer
shall take application responsibility in all cases but the following is a non-
exhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety
equipment, and installations subject to separate industry or government
regulations.
(iii) Use in consumer products or any use in significant quantities.
(iv) Systems, machines and equipment that could present a risk to life or
property. Please know and observe all prohibitions of use applicable to this
product.
changed at any time based on improvements and other reasons. It is our prac-
tice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifica-
tions of the Product may be changed without any notice. When in doubt, spe-
cial part numbers may be assigned to fix or establish key specifications for
your application. Please consult with your Seller representative at any time to
confirm actual specifications of purchased Product.
5. Errors and Omissions. The information in this publication has been carefully
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors, or omissions.
6. RoHS Compliance. Where indicated, our products currently comply, to the
best of our knowledge as of the date of this publication, with the requirements
of the European Union's Directive on the Restriction of certain Hazardous
Substances ("RoHS"), although the requirements of RoHS do not take effect
until July 2006. These requirements may be subject to change. Please consult
our website for current information.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT
THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE
INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website
at http://www.components.omron.com – under the “About Us” tab, in the Legal Matters section.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.components.omron.com
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
847-882-2288
11/09
Specifications subject to change without notice
Printed in USA
Cat. No. X303-E-1
Snap Action Switch SS
相关型号：
SS-5-1.25A-BK1
Electric Fuse, Time Delay Blow, 1.25A, 250VAC, 35A (IR), Through Hole, HALOGEN FREE AND ROHS COMPLIANT
COOPER
©2020 ICPDF网 联系我们和版权申明