SS-P_1110 [OMRON]
SS Series Compatible Mounting; SS系列兼容安装
| 型号： | SS-P_1110 |
| 厂家： | 
OMRON ELECTRONICS LLC |
| 描述： | SS Series Compatible Mounting |
| 文件： | 总6页 (文件大小：396K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Subminiature Basic Switch
SS-P
SS Series Compatible Mounting with
a Simple Construction and Easy-to-Use
Design Concept
• Insert molded base and improved case-to-base seal
provides enhanced resistance to flux.
• Switch rating of 3 A at 125 VAC possible with a single-leaf
movable spring. Models for micro loads with gold crossbar
contact are also available.
• Solder, quick-connect terminals (#110), and PCB terminals
are available, including even-pitched PCB terminals.
• RoHS Compliant.
Ordering Information
.
Terminals
Solder terminals
Quick-connect
terminals (#110)
PCB terminals
Uneven pitch Even pitch
SS-3GPB
Rating
Actuator
Pin plunger
3 A
SS-3GP
SS-3GPT
SS-3GPD
Hinge lever
SS-3GLP
SS-3GLPT
SS-3GL13PT
SS-01GPT
SS-3GLPD
SS-3GL13PD
SS-01GPD
SS-3GLPB
Simulated roller lever
Pin plunger
SS-3GL13P
SS-01GP
SS-3GL13PB
SS-01GPB
0.1 A
Hinge lever
SS-01GLP
SS-01GL13P
SS-01GLPT
SS-01GL13PT
SS-01GLPD
SS-01GL13PD
SS-01GLPB
SS-01GL13PB
Simulated roller lever
Model Number Legend
SS-
P
1 2 3
4
3. Actuator
None: Pin plunger
4. Terminals
None: Solder terminals
1. Ratings
3:
01:
3 A at 125 VAC
0.1 A at 30 VDC
T:
Quick-connect terminals (#110)
L:
Hinge lever
Simulated roller lever
D:
B:
PCB terminals (Uneven pitch)
PCB terminals (Even pitch)
L13:
2. Contact Gap
G: 0.5 mm
Subminiature Basic Switch SS-P
103
Specifications
■ Characteristics
Operating speed
0.1 mm to 1 m/s (for pin plunger models)
Operating frequency
Mechanical: 300 operations/min
Electrical: 30 operations/min
Insulation resistance
Contact resistance
100 MΩ min. (at 500 VDC)
SS-3P: 50 mΩ max.
SS-01P: 100 mΩ max.
Dielectric strength (See note 2)
1,000 VAC, 50/60 Hz for 1 min between terminals of the same polarities
1,500 VAC, 50/60 Hz for 1 min between current-carrying metal parts and ground, and
between each terminal and non-current-carrying metal parts
Vibration resistance (See note 3)
Shock resistance (See note 3)
Malfunction: 10 to 55 Hz, 1.5-mm double amplitude
Destruction: 1,000 m/s2 (approx. 100 G) max.
Malfunction: 300 m/s2 (approx. 30 G) max.
Degree of protection
IEC IP40
Degree of protection against electrical shock
Proof tracking index (PTI)
Ambient operating temperature
Ambient operating humidity
Life expectancy
Class I
175
−25°C to 85°C (at 60% RH max.) with no icing
85% max. (for 5°C to 35°C)
Mechanical: 1,000,000 operations min. (60 operations/min)
Electrical: SS-3P: 70,000 operations min. (20 operations/min, 125 VAC)
100,000 operations min. (20 operations/min, 30 VDC)
SS-01P: 200,000 operations min. (20 operations/min)
Approx. 1.6 g (for pin plunger models)
Weight
Note: 1. The data given above are initial values.
2. The dielectric strength shown in the table indicates a value for models with a Separator.
3. For the pin plunger models, the above values apply for both the free position and total travel position. For the lever models, the values
apply at the total travel position. Contact opening or closing time is within 1 ms.
■ Ratings
Model
Item
SS-3P
SS-01P
Rated voltage
Resistive load
0.1 A
125 VAC
30 VDC
3 A
3 A
0.1 A
Note: The electrical rating applies under the following test conditions:
Ambient Temperature = 20±2°C, Ambient Humidity = 65±5%, Operating frequency = 30 operations/minute
■ Approved Standards
■ Contact Specifications
UL Recognized (File No. E41515)
CSA Certified (UL approval)
Item
Specification
Material
SS-3P
SS-01P
Crossbar
Gold alloy
Rivet
Silver alloy
Rated Voltage
125 VAC
SS-3P
3 A
SS-01P
0.1 A
Gap (standard value)
0.5 mm
Minimum applicable
load (see note)
30 VDC
3 A
0.1 A
160 mA at 5 VDC
1 mA at 5 VDC
EN61058-1 - - VDE approval
(File No. 40008425)
Note: Minimum applicable loads are indicated by N standard refer-
ence values. This value represents the failure rate at a 60%
(λ60) reliability level (JIS C5003).
Rated Voltage
125 VAC
SS-3P
3 A
SS-01P
0.1 A
-6
The equation λ60=0.5 x 10 / operations indicates that a failure
rate of 1/2,000,000 operations can be expected at a reliability
level of 60%
30 VDC
3 A
0.1 A
Testing conditions: 5E4 (50,000 operations), T55 (0°C to 55°C)
Note: The rated values approved by each of the safety standards
(e.g. UL, CSA) may be different from the performance charac-
teristics individually defined in this catalog.
104
Subminiature Basic Switch SS-P
Engineering Data
■ Mounting Holes
PCB Mounting Dimensions (Reference - uneven spacing)
Panel Mounting
0.1
16.1
All switches may be panel mounted using M2.3 mounting screws with
plane washers or spring washers to securely mount the switch.
Tighten the screws to a torque of 0.23 to 0.26 N·m
0.1
8.8
Three, 1.35 to 1.5 dia.
Two, 2.4-dia. mounting holes or M2.3 screw holes
PCB Mounting Dimensions (Reference - even spacing)
0.1
0.1Three, 1.35 to 1.5 dia.
7.62
7.62
0.1
9.5
■ Contact Form
SPDT
COM
NO NC
Dimensions
■ Terminals
Note: 1. Unless otherwise specified, all units are in millimeters and a tolerance of ±0.4 mm applies to all dimensions
2. Terminal plate thickness is 0.5 mm for all models.
Solder Terminals
Quick-connect Terminals (#110)
0.2
0.2
7.55
7.55
7.3
11
0.1
0.1
3.3
3.3
7.1
2.15
8.55
15.5
0.5
Three, 1.6-dia. holes
3-2.8
0.5
0.2
0.2
7.6
7.6
PCB Terminals (Uneven pitch)
PCB Terminals (Even pitch)
0.2
0.2
7.55
7.55
(5.25)
(4.82)
1.8 3.9
1.8 3.9
0.1
0.1
3.3
3.3
1.85
3-1.2
3-0.8
1.3
0.5
3-1.2
3-0.8
1.3
0.5
0.2
8.8
0.2
16.1
0.2
0.2
7.62
7.62
Subminiature Basic Switch SS-P
105
■ Dimensions and Operating Characteristics
Note: 1. Unless otherwise specified, all units are in millimeters and a tolerance of ±0.4 mm applies to all dimensions
2. The following illustrations are for solder terminal models. Refer to “Terminals” for models with quick-connect terminals (#110) and PCB terminals.
3. The operating characteristics are for operation in the A direction(
)
Pin Plunger Models
SS-3GP
0.2
7.55
Characteristics
OF max.
RF min.
PT max.
OT min.
MD max.
OP
SS-3GP
SS-01GP
153 gf
20 gf
SS-01GP
3.5
PT
2
+0.075
0.07
2.5
dia.
2.35
dia.
7.7
−0.05
A
+0.075
−0.05
2.35
OP
6.9
0.6 mm
0.4 mm
0.1
3.3
7.3
0.15 mm
2.15
8.55
15.5
0.5
8.4 ± 0.3 mm
Three, 1.6 dia. holes
0.2
6.4
0.1
0.2
9.5
19.8
5.15
Hinge Lever Models
SS-3GLP
3.6
t=0.3 Stainless-steel lever
Characteristics SS-3GLP
OF max.
SS-01GLP
51 gf
5 gf
A
14.5
SS-01GLP
0.07
2.5
dia.
+0.075
−0.05
RF min.
2.35
FP
OP
7.7
6.9
OT min.
MD max.
FP max.
OP
1.0 mm
0.8 mm
0.1
3.3
7.3
+0.075
2.35
dia.
13.6 mm
−0.05
2.15
8.55
15.5
0.5
Three, 1.6 dia. holes
8.8 ± 0.8 mm
0.2
6.4
0.1
9.5
5.15
0.2
19.8
Simulated Roller Lever Models
SS-3GL13P
3.6
Characteristics SS-3GL13P SS-01GL13P
A
t=0.3 Stainless-steel lever
15.8
SS-01GL13P
R1.2
OF max.
RF min.
OT min.
MD max.
FP max.
OP
51 gf
5 gf
0.07
2.5
dia.
FP
2.35+−
0.075
OP
0.05
7.7
6.9
1.0 mm
0.1
3.3
0.8 mm
7.3
15.5 mm
10.7 ± 0.8 mm
2.35+−
dia.
0.075
0.05
2.15
8.55
15.5
0.5
Three, 1.6 dia. holes
0.2
6.4
0.1
5.15 9.5
19.8
0.2
106
Subminiature Basic Switch SS-P
Precautions
■ Correct Use
■ Cautions
Mounting
Handling
Mount the Switch onto a flat surface. Mounting on an uneven surface
may cause deformation of the Switch, resulting in faulty operation or
breakage in the housing.
Turn OFF the power supply before mounting or removing the Switch,
wiring, or performing maintenance or inspection. Failure to do so may
result in electric shock or burning.
Operating Stroke Setting
Solder Terminal Connection
Take particular care in setting the operating stroke for the pin plunger
models. Make sure that the operating stroke is 60% to 90% of the
rated OT distance. Do not operate the actuator exceeding the OT dis-
tance, otherwise the life expectancy of the Switch may be shortened.
When soldering lead wires to solder terminals, first insert the lead
wire conductor through the terminal hole and then solder.
Make sure that the temperature at the tip of the soldering iron is
350 to 400°C. Do not take more than 3 seconds to solder the switch
terminal, and do not impose external force on the terminal for 1 min
after soldering. Improper soldering involving an excessively high
temperature or excessive soldering time may deteriorate the charac-
teristics of the Switch.
Using Microloads
Using a model for ordinary loads to switch microloads may result in
faulty operation. Instead, use the models that are designed for micro-
loads and that operate in the following range;
Quick-Connect Terminals
Wire quick-connect terminals (#110) with receptacles. Insert the ter-
minals straight into the receptacles. Do not impose excessive force
on the terminal in the horizontal direction, otherwise the terminal may
be deformed or the housing may be damaged.
0.16 mA
26 mA 100 mA
30
24
Use appropriate #110 QC connectors, made by Nippon Tanshi or
Tyco Electronics, to mate with the quick-connect versions of the
switch. These connectors are not sold by OMRON. Contact Nippon
Tanshi or Tyco Electronics to purchase these connectors.
Operating
Operating range
for micro load
models SS-01P
range for
general-
load models
SS-3P
12
PCB Terminal Connection
Inoperable
range
When using automatic soldering baths, we recommend soldering at
260±5°C within 5 seconds. Make sure that the liquid surface of the
solder does not flow over the edge of the board.
5
0
1 mA
100 mA 160 mA
When soldering by hand, as a guideline, solder with a soldering iron
with a tip temperature of 350 to 400°C within 3 seconds, and do not
apply any external force for at least 1 minutes after soldering. When
applying solder, keep the solder away from the case of the Switch
and do not allow solder or flux to enter the case.
0.1
1
10
100
1,000
Current (mA)
However, even when using microload models within the operating
range shown above, if inrush current or inductive voltage spikes
occur when the contact is opened or closed, it may increase contact
wear and so decrease the service life. Therefore, insert a contact
protection circuit where necessary.
Insulation Distance
Use a separator between the switch and metal mounting panels, to
ensure proper dielectric characteristics are achieved.
Subminiature Basic Switch SS-P
107
All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which
can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.components.omron.com
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
847-882-2288
11/10
Specifications subject to change without notice
Printed in USA
Cat. No. X303-E-1
Subminiature Basic Switch SS-P
相关型号：
SS0.22M50-0405
Aluminum Electrolytic Capacitor, Polarized, Aluminum, 50V, 20% +Tol, 20% -Tol, 0.22uF
YSTONE
SS002A113R0/113R0BB
Array/Network Resistor, Bussed, Metal Foil, 0.5W, 113ohm, 0.1% +/-Tol, -5,5ppm/Cel, 6509,
VISHAY
SS002A1K560/1K560BD
Array/Network Resistor, Bussed, Metal Foil, 0.5W, 1560ohm, 0.1% +/-Tol, -5,5ppm/Cel, 6509,
VISHAY
©2020 ICPDF网 联系我们和版权申明