VAQ-4R-K
更新时间:2024-09-18 17:34:53
品牌:OMRON
描述:Pushbutton Switch, SPDT, Momentary, 15A, 8VDC, Quick Connect Terminal, Panel Mount-threaded
VAQ-4R-K 概述
Pushbutton Switch, SPDT, Momentary, 15A, 8VDC, Quick Connect Terminal, Panel Mount-threaded 按钮开关
VAQ-4R-K 规格参数
生命周期: | Active | Reach Compliance Code: | unknown |
ECCN代码: | EAR99 | HTS代码: | 8536.50.90.35 |
Factory Lead Time: | 14 weeks | 风险等级: | 5.78 |
主体宽度: | 21.9 mm | 主体高度: | 18 mm |
主体长度或直径: | 28 mm | 触点(交流)最大额定R负载: | 15A@250VAC |
最大触点电流(交流): | 15 A | 最大触点电流(直流): | 15 A |
触点(直流)最大额定R负载: | 15A@8VDC | 最大触点电压(交流): | 250 V |
最大触点电压(直流): | 8 V | 电气寿命: | 100000 Cycle(s) |
安装特点: | PANEL MOUNT-THREADED | 最大操作力: | 1.96 N |
最高工作温度: | 80 °C | 最低工作温度: | -25 °C |
密封: | IP00 | 表面贴装: | NO |
开关动作: | MOMENTARY | 开关功能: | SPDT |
开关类型: | PUSHBUTTON SWITCH | 端接类型: | QUICK CONNECT |
Base Number Matches: | 1 |
VAQ-4R-K 数据手册
通过下载VAQ-4R-K数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载Pushbutton Switch (Cylindrical 10.5-dia.)
VAQ
CSM_VAQ_DS_E_4_1
Built-in V-series Miniature Basic
Switch for Compatibility with
Business and Consumer Equipment
• Momentary operation and lock.
• Operation Unit available in six colors.
• Improved sense of touch with built-in miniature basic switch.
Refer to Safety Precautions for All Pushbutton Switches
and Safety Precautions on page 4.
Ordering Information
Operation Unit color
Classifica-
tion
Shape of
Out-
put
Operation Unit
Blue (-A)
Black (-B)
VAQ-4B-K
Green (-G)
Red (-R)
White (-W)
Yellow (-Y)
VAQ-4Y-K
1 *1
1 *2
2 *2
1 *2
VAQ-4A-K
VAQ-4G-K
VAQ-4G-L
2VAQ-4G
VAQR-4G
VAQ-4R-K
VAQ-4W-K
VAQ-4W-L
2VAQ-4W
VAQR-4W
Momentary
operation
13 dia.
VAQ-4A-L
2VAQ-4A
VAQR-4A
VAQ-4B-L
2VAQ-4B
VAQR-4B
VAQ-4R-L
2VAQ-4R
VAQR-4R
VAQ-4Y-L
2VAQ-4Y
—
11.4
Lock
*2
*1. The Operation Unit can be inserted and removed.
*2. The Operation Unit is screwed in.
Specifications
Ratings
Non-inductive load (A)
Inductive load (A)
Inductive
Item
Rated
voltage (V)
Resistive
load
Lamp load
Motor load
Built-in Switch
load
125 VAC
250 VAC
8 VDC
15
15
15
10
0.6
0.3
2
10
3
2
10
3
4
10
6
V-15-1A5
30 VDC
125 VDC
250 VDC
4
10
4
0.1
0.05
0.6
0.3
0.1
0.05
Note: 1. The above values are for steady-state currents.
2. Inductive load: Power factor = 0.4 (AC); time constant = 7 ms (DC).
3. The lamp load has an inrush current of 10 times the steady-state current.
4. The motor load has an inrush current of 6 times the steady-state current.
5. The rated values above are for testing conducted under the following conditions.
(1) Ambient temperature: 20 2°C.
(2) Ambient humidity: 65% 5%RH
(3) Operating frequency: 20 times/min.
1
VAQ
Specifications
Characteristics
Operating Characteristics
Mechanical
Electrical
120 operations/min
Operating
frequency
Output
1
2
20 operations/min
Operating characteristics
Insulation resistance
Contact resistance
100 MΩ min. (at 500 VDC)
30 mΩ max. (initial value)
Operating force
Releasing force
Pretravel
OF max.
RF min.
PT max.
1.96 N
0.39 N
1.3 mm
4.90 N
0.78 N
1.6 mm
Between terminals of
same polarity
1,000 VAC, 50/60 Hz for 1
minute
Between current-
carrying metal part and
ground, and between
Contact Form
Dielectric
strength
Name
Contact form
1,500 VAC, 50/60 Hz for 1
each terminal and non- minute
current-carrying metal
part
Double-throw contacts
NC
NO
Vibration
resistance
10 to 55 Hz, 1.5 mm
Malfunction
double amplitude *
COM
Destruction
Malfunction
Mechanical
Electrical
500 m/s2
Shock
200 m/s2 max. *
3,000,000 operations min.
100,000 operations min.
Approx. 12 to 40 g
36 A max.
resistance
Approved Standard Ratings
Durability
Weight
• The built-in V-15-1A5 Switch is approved for UL and CSA.
NC
NO
Inrush
current
36 A max.
–25 to 80°C (with no icing or
Ambient operating temperature
Ambient operating humidity
Ambient storage temperature
condensation)
35% to 85%RH
–25 to 80°C (with no icing or
condensation)
Degree of protection
Electric shock protection class
PTI (proof tracking index)
Pollution degree
IP00
Class II
175
3 (IEC947-5-1)
* Malfunction within 1 ms
Insert one of the following letters into the box (@) in the model number. Refer to Ordering Information for color symbols.
Dimensions
(Unit: mm)
VAQ-4@-K
3 × 16 tapping screw
*4
18
11
5.6 dia. 6 dia.
Width across hexagonal nut flats: 14,
*2
*3
Thickness: 2.
15 dia. (lock washer)
Face nut thickness: 2, Diameter: 14.
*1
38
One, M10
22.2
3
28
13 dia.
11.4
7
Note: The Operation Unit can be
inserted and removed.
8.6 10.3
*1. Unthreaded screw section: Approx. one thread
*2. Thermoplastic resin foam
*3. V-15-1A5 Miniature Basic Switch
*4. Three, #187 tab/solder terminals (t = 0.5)
10
21.9
25
FP: 24.5 max.
2
VAQ
VAQ-4@-L
3 × 16 tapping screw
*4
18
11
5.6 dia. 6 dia.
*2
Width across hexagonal nut flats: 14,
Thickness: 2.
*3
15 dia. (lock washer)
Face nut thickness: 2, Diameter: 14.
*1
38
One, M10
22.2
3
28
13 dia.
7
*1. Unthreaded screw section: Approx. one thread
*2. Thermoplastic resin foam
*3. V-15-1A5 Miniature Basic Switch
*4. Three, #187 tab/solder terminals (t = 0.5)
11.4
8.6 10.3
Note: The Operation Unit is
mounted with M3 screws.
10
FP: 24.5 max.
21.9
25
VAQR-4@
24.5
16 max.
6.2
2
*4
Two, M3 × 16 pan-head mounting screws
25
*2 *3
Width across hexagonal nut flats: 14,
Thickness: 2.
15 dia. (lock washer)
Face nut thickness: 2, Diameter: 14.
*1
38
38
One, M10
22.2
3
28
13 dia.
5.5
*1. Unthreaded screw section: Approx. one thread
*2. V-15-1A5 Miniature Basic Switch
*3. Separator (t = 0.18 mm) (varnished Tetron cloth)
*4. Six, #187 tab/solder terminals (t = 0.5)
Note: The Operation Unit is
mounted with M3 screws.
1.8
11.4
10 7.1 10.3
21.3
FP: 24.5 max.
29
2VAQ-4@
*4
2.7
25.3
2
*3
*2
Two, M3 × 28 tapping screw
Width across hexagonal nut flats: 14,
Thickness: 2.
15 dia. (lock washer)
Face nut thickness: 2, Diameter: 14.
*1
39
38
One, M10
22.2
29.2
13 dia.
6
4
*1. Unthreaded screw section: Approx. one thread
*2. Two V-15-1A5 Miniature Basic Switches
*3. Separator (t = 0.18 mm) (varnished Tetron cloth)
*4. Six, #187 tab/solder terminals (t = 0.5)
Note: The Operation Unit is
mounted with M3 screws.
8.1 10.3
0.8
11.4
FP: 24.5 max.
10
21.4
29
Panel Cutout
(Unit: mm)
10.5 0.3 dia.
Note: Recommended panel
thickness: 1 to 4 mm.
3
VAQ
Safety Precautions
Refer to Safety Precautions for All Pushbutton Switches.
Precautions for Correct Use
Operation Unit Mounting
Panel Mounting and Operation Unit Mounting
VAQ-4@-K
Operation Unit Mounting
VAQ-4@-K
• The Operation Unit can be inserted
and removed.
• Mounting can be performed by
• The Operation Unit can be inserted and removed.
• Mounting can be performed by inserting the slit of the Operation
Unit into the mounting screw of the Switch.
• Mounting force: 39.2 N max.
Operation Unit
• Removing strength: 22.5 N min.
inserting the slit of the Operation Unit
Slit
Insert/remove
VAQ-4@-L
• The Operation Unit is screwed in.
into the mounting screw of the Switch.
• Mounting force: 39.2 N max.
Mounting screw
• Mounting can be performed by inserting the M3 screw of the
Operation Unit into the flange of the Switch.
• Tighten the Operation Unit to a torque of 0.20 to 0.39 N·m.
2VAQ-4@
VAQR-4@
• The Operation Unit is screwed in.
• Mounting can be performed by inserting the M3 screw of the
Operation Unit into the metal flange of the Switch.
• Tighten the Operation Unit to a torque of 0.20 to 0.39 N·m.
• Removing strength: 22.5 N min.
VAQ-4@-L, 2VAQ-4@, VAQR-4@
• The Operation Unit is screwed in.
• Mounting can be performed by
inserting the M3 screw of the
Operation Unit into the flange of the
Switch.
• Tighten the Operation Unit to a torque
of 0.20 to 0.39 N·m.
Screw-mounted
Operation Unit
M3 screws
Flange
Mounting
• Tighten the nut to a torque of 0.49 to 0.78 N·m.
• Do not perform wiring with power supplied to the Switch. Do not
touch the terminals or other charged parts of the Switch while
power is being supplied. Doing so may result in electric shock.
• After wiring the Switch, ensure an appropriate insulating distance.
Panel Mounting
Tighten the hexagonal nut using a wrench while securing the Switch
by holding it with your fingers.
(Hexagonal nut tightening torque: 0.98 N·m)
Wiring
Face nut
• Twist the conductors through the terminal holes before soldering.
To perform soldering on solder terminals, use a soldering iron with
a capacity of 60 W maximum and complete soldering within 5
seconds. Wait for one minute after soldering before exerting any
external force on the solder.
Panel
Lock washer
• For connection with tab terminals, gently insert receptacles for
#187 tabs in the terminal push-out direction.
The Switch does not have a ground terminal.
Hexagonal nut
Locking Method
VAQR-@@
• To turn ON the lock, press the Operation Unit and turn it clockwise
as indicated at the top of the Operation Unit.
• To release the lock, turn the Operation Unit counterclockwise.
Operation Unit Models
Method
Insert/remove
Screw-mounted
Operation Unit color
Blue (A)
VAQ-BA HEAD
VAQ-BB HEAD
VAQ-BG HEAD
VAQ-BR HEAD
VAQ-BW HEAD
VAQ-BY HEAD
VAQ-4A YO HEAD
VAQ-4B YO HEAD
VAQ-4G YO HEAD
VAQ-4R YO HEAD
VAQ-4W YO HEAD
VAQ-4Y YO HEAD
Black (B)
Green (G)
Red (R)
White (W)
Yellow (Y)
4
Read and Understand This Catalog
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or
comments.
Warranty and Limitations of Liability
WARRANTY
OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified)
from date of sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR
FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS
DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS
IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT
LIABILITY.
In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS
OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT
SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
Application Considerations
SUITABILITY FOR USE
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's
application or use of the products.
At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the
products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,
machine, system, or other application or use.
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible
uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:
·
·
Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.
Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,
safety equipment, and installations subject to separate industry or government regulations.
·
Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE
SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND
INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
Disclaimers
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons.
It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.
However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or
establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual
specifications of purchased products.
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.
PERFORMANCE DATA
Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the
result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON
Warranty and Limitations of Liability.
ERRORS AND OMISSIONS
The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,
typographical, or proofreading errors, or omissions.
2010.10
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2010 All Right Reserved.
VAQ-4R-K 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
VAQ-4R-L | OMRON | Pushbutton Switch, SPDT, Momentary, 15A, 8VDC, Quick Connect Terminal, Panel Mount-threaded | 获取价格 | |
VAQ-4W-K | OMRON | Pushbutton Switch, SPDT, Momentary, 15A, 8VDC, Quick Connect Terminal, Panel Mount-threaded | 获取价格 | |
VAQ-4W-L | OMRON | Pushbutton Switch, SPDT, Momentary, 15A, 8VDC, Quick Connect Terminal, Panel Mount-threaded | 获取价格 | |
VAQ-4Y-K | OMRON | Pushbutton Switch, SPDT, Momentary, 15A, 8VDC, Quick Connect Terminal, Panel Mount-threaded | 获取价格 | |
VAQ-BB | ETC | DRUCKTASTER WECHSLER 1POL KNOPF SCHWARZ | 获取价格 | |
VAQ-BG | ETC | DRUCKTASTER WECHSLER 1POL KNOPF GRUEN | 获取价格 | |
VAQ-BR | ETC | DRUCKTASTER WECHSLER 1POL KNOPF ROT | 获取价格 | |
VAQ-BY | ETC | DRUCKTASTER WECHSLER 1POL KNOPF GELG | 获取价格 | |
VAQ20-Q12-S15 | CUI | VAQ20-Q12-S15 | 获取价格 | |
VAQ20-Q12-S5 | CUI | VAQ20-Q12-S5 | 获取价格 |
VAQ-4R-K 相关文章
- 2024-09-20
- 6
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6