XG8V-1331 [OMRON]

Standard Unshrouded Header Plug; 标准无罩头插头


型号：	XG8V-1331
厂家：	OMRON ELECTRONICS LLC
描述：	Standard Unshrouded Header Plug 标准无罩头插头
文件：	总8页 (文件大小：918K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Standard Unshrouded Header Plug

XG8

Standard Plugs can be used in a wide

range of applications.

• The XG8 2 row plugs mates with different Omron 2 row Sockets:

XG4M Flat Cable Connector, XG4H Board to Board Connector

and XG5 Discrete-wire IDC Connector

• XG8A and XG8B Header / Plugs are sold in strips of 50

(single row) or 100 (double row) terminals. Simply cut the

strips to the desired length / number of contacts.

• XG5Z-0002 Top Lock Levers (sold separately) ensure secure

connection to Omron Sockets when used with double row,

right-angle XG8W

Unshrouded Plugs

Original Header / Plug

Model

XG8V

XG8W

Single Row

Double Row

Straight

Right-angle

Straight

Right-angle

Appearance

Header / Plug Strips

Model

XG8A

XG8B

Single Row

Double Row

Straight

Right-angle

Straight

Right-angle

Appearance

Note: 1. See the following pages for exact part numbers

■ Ratings and Characteristics

Rated current 3 A (See note 1.)

■ Materials and Finish

Model

XG8V and XG8W

XG8A and XG8B

Base

Rated voltage 300 VAC

Fiber-glass reinforced PBT resin (UL94V-0)/black

Contacts Mating end

Contact

resistance

20 mΩ max. (at 20 mV, 100 mA max.) (See note 2.)

1) Brass/nickel base, Brass/nickel base,

0.15-μm gold plating 0.15-μm gold plating

Insulation

resistance

1,000 MΩ min. (at 500 VDC)

2) Brass/nickel base,

Brass/nickel base, tin

tin plating

Terminal

plating

Dielectric

strength

650 VAC for 1 min. (leakage current: 1 mA max.)

Operating: −55°C to 105°C (with no icing)

Note: Two types of contacts and mating ends, one with all gold plating

Ambient

temperature

and the other with all tin plating, are available. (XG8V and XG8W)

■ Applicable Sockets

Note: 1. The rated current will depend on the Socket you are using.

It is 1A if using the XG4M and 3A if using XG5, for example.

XG8W and XG8B XG4M Flat Cable Connectors (Sockets)

2. The contact resistance is measured with the Plug mated to

(Double Row)

XG4H Board-to-Board Connectors (Sockets)

an XG5M-N.

XG5M-N Discrete-wire IDC Connectors

(Double-row Sockets)

Standard Unshrouded Header Plug XG8

XG8V Single-row Header Plugs

Dimensions

XG8V-@@31

No. of

contacts

Dimensions (mm)

(With gold-plated straight terminals)

XG8V-@@41

7.6

5.08

7.62

Mounting holes (bottom view)

(With tin-plated straight terminals)

10.2

12.7

15.2

17.8

20.3

25.4

30.5

33.0

38.1

40.6

43.2

50.8

91.4

+0.1

0.8

dia.

10.16

12.70

15.24

17.78

22.86

27.94

30.48

35.56

38.10

40.64

48.26

88.90

0.635 0.635

XG8V-@@34

No. of

contacts

Dimensions (mm)

Mounting holes (bottom view)

(With gold-plated right-angle terminals)

+0.1

0.8

dia.

7.6

5.08

7.62

XG8V-@@44

10.2

12.7

15.2

17.8

20.3

25.4

30.5

33.0

38.1

40.6

43.2

50.8

91.4

(With tin-plated right-angle terminals)

10.16

12.70

15.24

17.78

22.86

27.94

30.48

35.56

38.10

40.64

48.26

88.90

4 to 11

0.635 0.635

Ordering Information

Appearance

Plugs with straight terminals

Plugs with right-angle terminals

No. of contacts

Model (gold plated)

Model (tin plated)

Model (gold plated)

Model (tin plated)

XG8V-0331

XG8V-0431

XG8V-0531

XG8V-0631

XG8V-0731

XG8V-0831

XG8V-1031

XG8V-1231

XG8V-1331

XG8V-1531

XG8V-1631

XG8V-1731

XG8V-2031

XG8V-3631

XG8V-0341

XG8V-0441

XG8V-0541

XG8V-0641

XG8V-0741

XG8V-0841

XG8V-1041

XG8V-1241

---

XG8V-0334

XG8V-0434

XG8V-0534

XG8V-0634

XG8V-0734

XG8V-0834

XG8V-1034

XG8V-1234

XG8V-1334

XG8V-1534

XG8V-1634

XG8V-1734

XG8V-2034

XG8V-3634

XG8V-0344

XG8V-0444

XG8V-0544

XG8V-0644

XG8V-0744

XG8V-0844

XG8V-1044

XG8V-1244

---

XG8V-1641

---

XG8V-1644

---

XG8V-2041

XG8V-3641

XG8V-2044

XG8V-3644

Standard Unshrouded Header Plug XG8

XG8W Double Row Plugs for MIL Connectors

Dimensions

XG8W-@@31

Dimensions

(With gold-plated straight terminals)

Mounting holes (bottom view)

No. of

Dimensions (mm)

XG8W-@@41

contacts

+0.1

0.8

dia.

(With tin plated straight terminals)

12.7

17.8

20.3

25.4

33.0

38.1

43.2

50.8

63.5

76.2

10.16

15.24

17.78

22.86

30.48

35.56

40.46

48.26

60.96

73.66

0.635 × 0.635

XG8W-@@34

Dimensions

(With gold-plated right-angle terminals)

No. of

Dimensions (mm)

XG8W-@@44

contacts

Mounting holes (bottom view)

(With tin-plated right-angle terminals)

25.4

33.0

38.1

43.2

50.8

63.5

22.86

+0.1

0.8

dia.

30.48

35.56

40.64

48.26

60.96

4 to 11

0.635 × 0.635

Ordering Information

Appearance

Plugs with straight terminals

Plugs with right-angle terminals

No. of contacts

Model (gold plated)

Model (tin plated)

Model (gold plated)

Model (tin plated)

XG8W-1031

XG8W-1431

XG8W-1631

XG8W-2031

XG8W-2631

XG8W-3031

XG8W-3431

XG8W-4031

XG8W-5031

XG8W-6031

XG8W-1041

XG8W-1441

XG8W-1641

XG8W-2041

XG8W-2641

XG8W-3041

XG8W-3441

XG8W-4041

XG8W-5041

XG8W-6041

⎯

XG8W-2034

XG8W-2634

XG8W-3034

XG8W-3434

XG8W-4034

XG8W-5034

⎯

XG8W-2044

XG8W-2644

XG8W-3044

XG8W-3444

XG8W-4044

XG8W-5044

⎯

Standard Unshrouded Header Plug XG8

XG8A (Single-row)/XG8B (Double-row)

Header Plug Strips for MIL Connectors

Dimensions

■ Single-row Plugs

XG8A-5031

(With straight terminals)

Mounting holes (bottom view)

+0.1

0.8

dia.

0.635 × 0.635

XG8A-5034

(With right-angle terminals)

Mounting holes (bottom view)

+0.1

0.8

dia.

0.635 × 0.635

4 to 11

■ Double-row Plugs

XG8B-0131

(With straight terminals)

Mounting holes (bottom view)

+0.1

0.8

dia.

0.635 × 0.635

XG8B-0134

(With right-angle terminals)

Mounting holes (bottom view)

+0.1

0.8

dia.

0.635 × 0.635

4 to 11

Ordering Information

Terminal type

No. of contacts

Plugs with straight terminals

Model (gold plated contacts)

Plugs with right-angle terminals

Model (gold plated contacts)

50 (Single-row)

100 (Double-row)

XG8A-5031

XG8B-0131

XG8A-5034

XG8B-0134

Standard Unshrouded Header Plug XG8

Accessories

■ Top Lock Levers

XG5Z-0002 - “Lock Lever”

Mounting the Lock Lever

Can be used to lock XG8W Double-row Right-angle Terminal Plugs

to XG4M Flat Cables and XG5M-N Discrete-wire IDC Connectors.

(See XG4 and XG5 Datasheets).

Insert the tab on the Lock Lever into the hole on a Socket with a

polarity guide. In this way, it can be locked with XG8W Right-angle

Terminal Plugs.

They cannot be used with XG8W Double-row Straight Terminal Plugs.

Polarizing guide hole XG4M

XG8

Tab

Note: Order the above model in multiples of 10 pieces.

Lock lever

Precautions

■ Correct Use

Dividing the XG8W (with Straight Terminals), XG8V,

XG8A, and XG8B

Automated Soldering Conditions (Jet Flow)

1. Soldering temperature: 250 ±5°C

The above mentioned models may have the number of terminals and

rows reduced prior to pcb assembly, using the following method:

2. Continuous soldering time: Within 5 s

• Using a Cutter, make a cut on the slot as indicated by the dotted

line in the diagram. Then fold the Plug manually in the direction of

the arrows.

• XG8W’s with right-angle terminals are not designed to be divided in

this manner. Do not divide the XG8W with right-angle terminals.

Instead, use the XG8B Header Plug Strip with right-angle termi-

nals, if a double-row header plug with right-angle terminals must be

divided to reduce the number of terminal rows.

(1) Using a cutter,

make a cut along

the dotted line.

(2) Manually fold in

the direction of the

arrows.

Standard Unshrouded Header Plug XG8

MEMO

Standard Unshrouded Header Plug XG8

(b) Use in consumer Products or any use in significant quantities.

medical equipment, amusement machines, vehicles, safety equipment, and

installations subject to separate industry or government regulations.

(d) Systems, machines, and equipment that could present a risk to life or property.

3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING

SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM

AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE

PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE

WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED

VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY

SELLER.

5. Programmable Products: Seller shall not be responsible for the Buyer's programming of

a programmable Product.

Omron Electronic Components, LLC

Terms and Conditions of Sales

I. GENERAL

1. Definitions: The words used herein are defined as follows.

(a) Terms:

(b) Seller:

These terms and conditions

Omron Electronic Components LLC and its subsidiaries

The buyer of Products, including any end user in section III through VI

(d) Products: Products and/or services of Seller

(e) Including: Including without limitation

2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments,

invoices, purchase orders and other documents, whether electronic or in writing, relating

to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's

purchase order or other documents which are inconsistent with, or in addition to, these

Terms.

3. Distributor: Any distributor shall inform its customer of the contents after and including

section III of these Terms.

IV. WARRANTY AND LIMITATION

1. Warranty: Seller's exclusive warranty is that the Products will be free from defects in

materials and workmanship for a period of twelve months from the date of sale by Seller

(or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY

OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES,

NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE OF THE PRODUCTS.

2. Buyer Remedy: Seller's sole obligation hereunder shall be to replace (in the form

originally shipped with Buyer responsible for labor charges for removal or replacement

thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an

amount equal to the purchase price of the Product; provided that there shall be no

liability for Seller or its affiliates unless Seller's analysis confirms that the Products were

correctly handled, stored, installed and maintained and not subject to contamination,

abuse, misuse or inappropriate modification. Return of any Products by Buyer must be

approved in writing by Seller before shipment.

3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR

SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF

PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED

WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT,

WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL

LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF

THE PRODUCT ON WHICH LIABILITY IS ASSERTED.

4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and its

employees from and against all liabilities, losses, claims, costs and expenses (including

attorney's fees and expenses) related to any claim, investigation, litigation or proceeding

(whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or

omissions under these Terms or in any way with respect to the Products.

II. SALES

1. Prices; Payment: All prices stated are current, subject to change without notice by Seller.

Buyer agrees to pay the price in effect at the time the purchase order is accepted by

Seller. Payments for Products received are due net 30 days unless otherwise stated in

the invoice. Buyer shall have no right to set off any amounts against the amount owing in

respect of this invoice.

2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to

Buyer after deducting transportation charges, taxes and duties, and will be allowed only

if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past

due amounts owing to Seller.

3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the maximum

legal rate, whichever is less, on any balance not paid within the stated terms.

4. Orders: Seller will accept no order less than 200 U.S. dollars net billing.

5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer

shall make remittance to Seller at the then current exchange rate most favorable to

Seller; provided that if remittance is not made when due, Buyer will convert the amount

to U.S. dollars at the then current exchange rate most favorable to Seller available

during the period between the due date and the date remittance is actually made.

6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining

any government approvals regarding the importation or sale of the Products.

7. Taxes: All taxes, duties and other governmental charges (other than general real

property and income taxes), including any interest or penalties thereon, imposed directly

or indirectly on Seller or required to be collected directly or indirectly by Seller for the

manufacture, production, sale, delivery, importation, consumption or use of the Products

sold hereunder (including customs duties and sales, excise, use, turnover and license

taxes) shall be charged to and remitted by Buyer to Seller.

V. INFORMATION; ETC.

1. Intellectual Property: The intellectual property embodied in the Products is the exclusive

property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way

without the written permission of Seller. Buyer (at its own expense) shall indemnify and

hold harmless Seller and defend or settle any action brought against Seller to the extent

that it is based on a claim that any Product made to Buyer specifications infringed

intellectual property rights of another party.

2. Property; Confidentiality: Notwithstanding any charges to Buyer for engineering or

tooling, all engineering and tooling shall remain the exclusive property of Seller. All

information and materials supplied by Seller to Buyer relating to the Products are

confidential and proprietary, and Buyer shall limit distribution thereof to its trusted

employees and strictly prevent disclosure to any third party.

3. Performance Data: Performance data is provided as a guide in determining suitability

and does not constitute a warranty. It may represent the result of Seller's test conditions,

and the users must correlate it to actual application requirements.

4. Change In Specifications: Product specifications and descriptions may be changed at

any time based on improvements or other reasons. It is Seller’s practice to change part

numbers when published ratings or features are changed, or when significant

engineering changes are made. However, some specifications of the Product may be

changed without any notice.

8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to Seller,

Seller reserves the right to stop shipments or require satisfactory security or payment in

advance. If Buyer fails to make payment or otherwise comply with these Terms or any

related agreement, Seller may (without liability and in addition to other remedies) cancel

any unshipped portion of Products sold hereunder and stop any Products in transit until

Buyer pays all amounts, including amounts payable hereunder, whether or not then due,

which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid

accounts.

9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer

indemnifies Seller fully against all costs or expenses arising in connection therewith.

10. Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting from

causes beyond its control, including earthquakes, fires, floods, strikes or other labor

disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots,

delay in or lack of transportation or the requirements of any government authority.

11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller:

(a) All sales and shipments of Products shall be FOB shipping point (unless otherwise

stated in writing by Seller), at which point title to and all risk of loss of the Products

shall pass from Seller to Buyer, provided that Seller shall retain a security interest in

the Products until the full purchase price is paid by Buyer;

5. Errors And Omissions: The information on Seller’s website or in other documentation

has been carefully checked and is believed to be accurate; however, no responsibility is

assumed for clerical, typographical or proofreading errors or omissions.

6. Export Controls: Buyer shall comply with all applicable laws, regulations and licenses

regarding (a) export of the Products or information provided by Seller; (b) sale of

Products to forbidden or other proscribed persons or organizations; (c) disclosure to non-

citizens of regulated technology or information.

(b) Delivery and shipping dates are estimates only; and

handling and extra charges apply to special conditions.

12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products

occurring before delivery to the carrier or any claim related to pricing or other charges

must be presented in detail in writing to Seller within 30 days of receipt of shipment.

III. PRECAUTIONS

VI. MISCELLANEOUS

1. Suitability: IT IS THE BUYER’S SOLE RESPOINSIBILITY TO ENSURE THAT ANY

OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE

APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING

APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE

BUYER’S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC

COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E)

SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT.

Buyer acknowledges that it alone has determined that the Products will meet their

requirements of the intended use in all cases. Buyer must know and observe all

prohibitions of use applicable to the Product/s.

1. Waiver: No failure or delay by Seller in exercising any right and no course of dealing

between Buyer and Seller shall operate as a waiver of rights by Seller.

2. Assignment: Buyer may not assign its rights hereunder without Seller's written consent.

3. Law: These Terms are governed by Illinois law (without regard to conflict of laws).

Federal and state courts in Cook County, Illinois have exclusive jurisdiction for any

dispute hereunder.

4. Amendment: These Terms constitute the entire agreement between Buyer and Seller

relating to the Products, and no provision may be changed or waived unless in writing

signed by the parties.

5. Severability: If any provision hereof is rendered ineffective or invalid, such provision shall

not invalidate any other provision.

2. Use with Attention: The followings are some examples of applications for which

particular attention must be given. This is not intended to be an exhaustive list of all

possible use of any Product, nor to imply that any use listed may be suitable for any

Product:

(a) Outdoor use, use involving potential chemical contamination or electrical

interference.

Standard Unshrouded Header Plug XG8

Certain Precautions on Specifications and Use

1. Suitability for Use. Seller shall not be responsible for conformity with any stan- 2. Programmable Products. Seller shall not be responsible for the user's pro-

dards, codes or regulations which apply to the combination of the Product in

gramming of a programmable product, or any consequence thereof.

Buyer's application or use of the Product. At Buyer's request, Seller will pro- 3. Performance Data. Performance data given in this publication is provided as

vide applicable third party certification documents identifying ratings and limi-

tations of use which apply to the Product. This information by itself is not

sufficient for a complete determination of the suitability of the Product in com-

bination with the end product, machine, system, or other application or use.

a guide for the user in determining suitability and does not constitute a war-

ranty. It may represent the result of Seller's test conditions, and the users must

correlate it to actual application requirements. Actual performance is subject to

Seller's Warranty and Limitations of Liability.

Buyer shall be solely responsible for determining appropriateness of the par- 4. Change in Specifications. Product specifications and accessories may be

ticular Product with respect to Buyer's application, product or system. Buyer

shall take application responsibility in all cases but the following is a non-

exhaustive list of applications for which particular attention must be given:

(i) Outdoor use, uses involving potential chemical contamination or electrical

interference, or conditions or uses not described in this document.

(ii) Energy control systems, combustion systems, railroad systems, aviation

systems, medical equipment, amusement machines, vehicles, safety

equipment, and installations subject to separate industry or government

regulations.

(iii) Use in consumer products or any use in significant quantities.

(iv) Systems, machines and equipment that could present a risk to life or

property. Please know and observe all prohibitions of use applicable to this

product.

changed at any time based on improvements and other reasons. It is our prac-

tice to change part numbers when published ratings or features are changed,

or when significant construction changes are made. However, some specifica-

tions of the Product may be changed without any notice. When in doubt, spe-

cial part numbers may be assigned to fix or establish key specifications for

your application. Please consult with your Seller representative at any time to

confirm actual specifications of purchased Product.

5. Errors and Omissions. The information in this publication has been carefully

checked and is believed to be accurate; however, no responsibility is assumed

for clerical, typographical or proofreading errors, or omissions.

6. RoHS Compliance. Where indicated, our products currently comply, to the

best of our knowledge as of the date of this publication, with the requirements

of the European Union's Directive on the Restriction of certain Hazardous

Substances ("RoHS"), although the requirements of RoHS do not take effect

until July 2006. These requirements may be subject to change. Please consult

our website for current information.

NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS

RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM

AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT

THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE

INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website

at http://www.components.omron.com – under the “About Us” tab, in the Legal Matters section.

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.

OMRON ON-LINE

Global - http://www.omron.com

USA - http://www.components.omron.com

OMRON ELECTRONIC

COMPONENTS LLC

55 E. Commerce Drive, Suite B

Schaumburg, IL 60173

847-882-2288

01/10

Specifications subject to change without notice

Printed in USA

Cat. No. X304-E-1

Standard Unshrouded Header Plug XG8

XG8V-1331 [OMRON]

相关型号：

XG8V-1334

XG8V-1531

XG8V-1534

XG8V-1631

XG8V-1634

XG8V-1641

XG8V-1644

XG8V-1731

XG8V-1734

XG8V-2031

XG8V-2034

XG8V-2041