XM7D-0512 [OMRON]
Small Interface Connectors That Conform to USB Standards;
| 型号： | XM7D-0512 |
| 厂家： | 
OMRON ELECTRONICS LLC |
| 描述： | Small Interface Connectors That Conform to USB Standards |
| 文件： | 总10页 (文件大小：1518K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
XM7
USB Connectors
Small Interface Connectors
That Conform to USB Standards
• Compliant with the USB 2.0 standard.
mini-USB Connectors
• Insertion durability of 5,000 times.
• Lineup includes models with right-angle DIP terminals and
SMT terminals.
• Models with SMT terminals are available with reel packaging.
USB Connectors
• Insertion durability of 1,500 times.
• USB A-type sockets for mounting on personal computers and
USB hubs. USB B-type sockets for mounting on printers, scan-
ners, mouses, and other peripheral devices for computers.
RoHS Compliant
■Connectors
Right-angle DIP Terminals
Right-angle SMT Terminals
Appearance
USB 2.0
Mini-USB
Connectors
Model
Page
XM7D-0512
Packaged on stick: XM7D-0514, Packaged on reel: XM7D-0514-R
Page 2
Straight DIP Terminals
Right-angle DIP Terminals
Right-angle DIP Terminals
Right-angle DIP Terminals
Appearance
USB 2.0
Connectors
Model
Page
XM7A-0441
XM7A-0442
XM7A-0442-A
XM7B-0442
Page 4
1
XM7
USB 2.0 mini-USB Connectors
XM7D
■Model Number Legend
XM7D-05 1 @-@
1
2
3
4
5
1 Type
3 Plating Specification
5 Special Specification
D: mini-B-type socket
1: Gold plating
(Right-angle SMT Terminals Only)
Blank : Packaged on tray or stick
2 No. of Contacts
05: 5 contacts
4 Terminal Shape
2: Right-angle DIP terminals
4: Right-angle SMT terminals
R
: Packaged on reel
■Ordering Information
●Sockets
Right-angle DIP terminals
Right-angle SMT terminals
Appearance
Model
XM7D-0512
XM7D-0514
50/stick
Minimum ordering quantity (pieces)
Model
100/tray
−
−
XM7D-0514-R
500/reel*
Quantity per reel (pieces)*
* Please order by integer multiple of the quantity per reel.
■Ratings and Characteristics
■Materials and Finish
Rated current
1 A
Housing
Contacts
Shell
LCP/Black
Rated voltage
30 VAC
Mating end
Terminals
Copper alloy/gold plating
Copper alloy/tin plating
Copper alloy/nickel plating
Contact resistance
Insulation resistance
50 mΩ max. (at 20 mV, 100 mA max.)
100 MΩ min.
100 VAC for 1 min
(leakage current: 0.5 mA max.)
Dielectric strength
Insertion durability
5,000 times
Ambient operating temperature
0 to 50°C (with no icing or condensation)
2
XM7
■Dimensions
(Unit: mm)
XM7D-0512
7.7
6.9
PCB Mounting Holes
(Bottom View)
5.87
Contact No.1
2
3.1 3.9
1.8
4
0.1
7.4
0.05
0.8
0.4
0.6
0.8
1.6
0.25
1.2
0.05
0.05
1.9
0.9
1.25
0.1
4.75
3.2
7.3
4.75
0.05
Five, 0.7+00.1 dia.
1.2
Contact No.1
0.05
0.8
0.05
9.2
3.2
0.3
9.85
XM7D-0514
XM7D-0514-R
7.7
6.9
PCB Mounting Holes
(Top View)
∗
5.87
0.1
Contact No.1
8.8
2
3.1 3.9
0.05
0.05
2.5
0.9
1.5
0.05
0.1
2.5
5.5
0.3
9.25
5.5
0.05
0.5
Contact No.1
0.05
0.8
3.2
0.05
0.4
0.8
3.2
* The adhesive tape is on the top surface of the Connectors.
3
XM7
USB 2.0 USB Connectors
XM7A/B
■Model Number Legend
XM7@-04 4 @-@
1
2
3
4
5
1 Type
A: A-type socket
B: B-type socket
3 Plating Specification
4: Gold plating
5 Special Specification (A-type Sockets Only)
Blank : Single socket
: Double stacked sockets
A
4 Terminal Shape
2 No. of Contacts
04: 4 contacts
1: Straight DIP terminals
2: Right-angle DIP terminals
■Ordering Information
●Sockets
Item
Type
Single A-type Socket
Straight DIP Terminals
Single A-type Socket
Double Stacked A-type Sockets
Right-angle DIP Terminals
Single B-type Socket
Right-angle DIP Terminals
Right-angle DIP Terminals
Appearance
Model
XM7A-0441
XM7A-0442
XM7A-0442-A
XM7B-0442
Minimum ordering
quantity (pieces)
120
150
120
150
■Ratings and Characteristics
Rated current
1 A
Rated voltage
30 VAC
Contact resistance
Insulation resistance
Dielectric strength
Insertion durability
Ambient operating temperature
30 mΩ max. (at 20 mV, 100 mA max.)
1,000 MΩ min. (at 500 VDC)
750 VAC for 1 min (leakage current: 0.5 mA max.)
1,500 times
−40 to 60°C (with no icing or condensation)
■Materials and Finish
PBT
Housing
A-type Sockets: Black
B-type Sockets: White
Mating end
Terminals
Copper alloy/gold plating
Copper alloy/tin alloy plating
Copper alloy/tin plating
Contacts
Shell
4
XM7
■Dimensions
(Unit: mm)
(15.6)
XM7A-0441
Single A-type Socket
PCB Mounting Holes
(t = 1.6 mm, Bottom View)
7
2
0.1
13.14
Contact No.1
Contact No.4
0.1
3.07
0.1
2.71
Two, 2.3 0.08 dia.
0.1
2.5
Four, 0.92 0.08 dia.
0.1
2.0
7.0
0.1
14.5
12.5
2.8
Contact No.4
Contact No.1
7.12 5.12
0.25
1.4
(0.5)
2.71 5.72
15.0
14.0
14.5
XM7A-0442
Single A-type Socket
Contact No. 1
7.12 5.12
Contact No. 4
12.5
6.99
3.72
4.13
(11.4)
2.84
2
7
10.28
2.71
(16.2)
PCB Mounting Holes
(t = 1.6 mm, Bottom View)
0.1
13.14
Contact No. 1
Contact No. 4
0.1
3.07
0.1
2.71
Two, 2.3 0.08 dia.
Four, 0.92 0.08 dia.
0.1
2.5
0.1
2.0
7.0
0.1
XM7A-0442-A
Double Stacked A-type Sockets
14.5
12.5
Top contact No. 1
5.12
Top contact No. 4
0.5
16.96
13.62
(19.9)
8.5 15.62
15.49
5.12
2.84
Bottom contact No. 4
Bottom contact No. 1
2
7
2.71
5.33
5.68
3.72
(15.6)
10.28
Top contact
PCB Mounting Holes
Bottom contact
(t = 1.6 mm, Bottom View)
Four, 2.3 0.08 dia.
0.1
0.1
13.14
3.07
Bottom contact No. 1
Eight, 0.92 0.08 dia.
Bottom contact No. 4
0.1
2.71
0.1
0.1
5.68
5.33
0.1
2.0
7.0
0.1
Top contact No. 4
Top contact No. 1
5
XM7
12.04
8.45
5.5
XM7B-0442
Single B-type Socket
Contact No. 2
Contact No. 1
16
11
3.1 7.78
10.62
(14.7)
2.91
Contact No. 3
Contact No. 4
2.5
10.28
Contact
No. 4
2.71
2
(15.2)
Contact
No. 1
Contact
No. 3
Contact
No. 2
PCB Mounting Holes
(t = 1.6 mm, Bottom View)
Contact No. 3
Contact No. 4
0.1
12.04
0.1
0.1
2.71
2
Two, 2.3 0.08 dia.
0.1
4.77
0.1
2.5
Four, 0.92 0.08 dia.
Contact No. 2
Contact No. 1
■Accessories (sold separately)
(Unit: mm)
●Dust cover (For XM7A Single A-type socket)
XM7Z-0001 (A type)
1.4
7.5
16.8
12.3
2.35
10
●Dust cover (For XM7B sockets)
XM7Z-0002 (B type)
Characteristics/Material
Ambient operating
temperature
−40 to 60°C
1.4
6.4
14.2
(with no icing or condensation)
Material
PE
8
Minimum ordering quantity
(pieces)
Model
Applicable
XM7Z-0001
XM7Z-0002
XM7A (Single A-type Socket)
XM7B
50
13
7.4
Note: Dust covers cannot be used for Double Stacked A-type sockets.
6
XM7
■Precautions
Precautions for Correct Use
●Automatic Soldering
●Using an Automatic Solder Bath after Reflow
Reference Information: Automated Soldering Conditions
Mask the mating portion with tape before you perform automatic
soldering to prevent flux or solder from entering the mating por-
tion of the Connector. Select and use a suitable masking tape.
(Jet Flow)
(1) Soldering temperature: 250 5°C
(2) Continuous soldering time: 5 1 s max.
●Application Precautions
• Confirm that there is no excessive misalignment or inclination
●Soldering Conditions
• Reference Information: Reflow Conditions
in the mating contact portion between the plug and socket
before mating the Connector. Make sure that the Connector is
mated all the way to the back. If the Connector is not mated all
the way to the back, contact reliability may be lost.
Maximum temperature: 260°C
Time: 5 to 15 s max.
(°C)
Peak temperature
Soldering temperature
Preheating temperature
260
250
150
• Do not apply an extreme load during Connector insertion or
removal. The Connector may be damaged, and contact failure
may result. Twist the plug and socket as little as possible when
mating the Connector. Not doing so may deform the terminals
or housing or crack the housing.
(s)
Preheating time:
60 s max.
Soldering time:
5 to 15 s max.
• Do not insert a foreign object, such as tweezers, into the Con-
nector mating contact portion. Doing so may cause the plating
to peel off or deform the terminals.
These conditions, however, depend on the type of solder, the
manufacturer, the amount of solder, the size of the board, and
the other mounting materials.
●Precautions for Board Mounting
Be careful of the amount of board warping. If the board is exces-
●Metal Mask for Cream Solder Printing
We recommend a metal mask thickness of 0.15 mm when print-
sively warped, soldering faults may occur.
●Storage
ing cream solder.
Do not store the Connectors in locations subject to dust or high
The appropriate conditions, however, depend on the type of sol-
der, the manufacturer, the amount of solder, the size of the circuit
board, other mounting materials, and other conditions.
humidity. Do not store the Connectors in locations close to
sources of gasses such ammonia gas or sulfide gas.
●Terminal Shapes
The terminals will deform if they are subjected to an excessive
load, which will in turn reduce solderability when mounting. Do
not drop the Connectors or handle them carelessly. Do not con-
nect anything when the Connectors are not mounted to a board.
Doing so may deform the terminals.
●Mating
Do not connect the connectors in the wrong direction.
Doing so will damage the connectors.
7
MEMO
Terms and Conditions Agreement
Read and understand this catalog.
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have
any questions or comments.
Warranties.
(a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship
for a period of twelve months from the date of sale by Omron (or such other period expressed in writing
by Omron). Omron disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE
PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL
SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.
Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products
or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election,
to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the
non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price
of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other
claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored,
installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by
Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or
unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system
assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in
writing, are not to be construed as an amendment or addition to the above warranty.
See http://www.omron.com/global/ or contact your Omron representative for published information.
Limitation on Liability; Etc.
OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,
WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted.
Suitability of Use.
Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the
combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable
third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself
is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine,
system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product
with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE
QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS,
AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
Programmable Products.
Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence
thereof.
Performance Data.
Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining
suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it
to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability.
Change in Specifications.
Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice
to change part numbers when published ratings or features are changed, or when significant construction changes are made.
However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be
assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to
confirm actual specifications of purchased Product.
Errors and Omissions.
Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
• Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product.
• Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad
systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious
influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or
equipment, and be sure to provide the system or equipment with double safety mechanisms.
Note: Do not use this document to operate the Unit.
OMRON Corporation
Electronic and Mechanical Components Company
Contact: www.omron.com/ecb
Cat. No. G079-E1-04
0914(0813)(O)
相关型号：
XM9B-18844-10
Telecom and Datacom Connector, 8 Contact(s), Male, Right Angle, Solder Terminal, Locking, Jack
OMRON
XM9B-18844-11
Telecom and Datacom Connector, 8 Contact(s), Male, Right Angle, Solder Terminal, Locking, Jack
OMRON
©2020 ICPDF网 联系我们和版权申明