ZEN-BAT01 [OMRON]
Programmable Relay; 可编程继电器型号: | ZEN-BAT01 |
厂家: | OMRON ELECTRONICS LLC |
描述: | Programmable Relay |
文件: | 总36页 (文件大小:1739K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Programmable Relay
ZEN V2 Units
Please read and understand this catalog before purchasing the
products. Please consult your OMRON representative if you have any
questions or comments. Refer to “Warranty and Application
Considerations” on page 36, and “Precautions for Safe Use” on page 34.
Even Broader Applications with Increased
Functionality and Higher Precision
• Increased functionality in a compact body (70 mm wide × 90 mm
high).
• Easy programming is available using the LCD and operation
buttons. (See note 1.)
• This single Unit easily provides relay, timer, counter, and time
switch functions.
• Expansion is easy with Expansion I/O Units, allowing up to 44
I/O points. (See note 2.)
• Economy-type and Communications-type CPU Units have been
added to series.
The information in this document applies to V2 Units.
Refer to page 28 for details on differences with previous
products.
• Improved Weekly Timers (See note 1.)
Increased timing accuracy with a monthly deviation of 1ꢀ s
max. Multiple-day operation and pulse output operation have
been added.
• Select from two power supply options:
100 to 240 VAC or 12 to 24 VDC.
Note: 1. Not supported for ZEN-@C2@@-@-V2 models.
2. When using CPU Units with 20 I/O points.
Features
■ Easy and Simple Programming for Automatic Small-scale Control
Saves Space, Wiring, and Installation Steps
Easy Programming
• Versatile functionality in a compact body (70 mm wide × 90 mm
The LCD screen comes with 8 operation buttons on the front panel to
enable programming in ladder view format. The LCD screen also has
a backlight, making it easier to see when the ZEN is used in dark
locations.
high).
• This single Unit easily provides relay, timer, counter, and time
switch functions. Wiring work is greatly reduced because separate
wiring is not required for devices such as timers and counters.
Note: Not supported for ZEN-@C2@@-@-V2 models.
90 mm
70 mm
Programmable Relay ZEN V2 Units
1
Flexible Expansion Enables Up to 44 I/O
Points
Up to three Expansion I/O Units can be connected if there are not
enough I/O points. Expansion I/O Units are only 3ꢀ mm wide.
Support Software with Simulation Function
• Programs can be easily written, saved, and monitored by personal
computer.
• Programs can be simulated on the personal computer without
connecting to the ZEN.
Note: CPU Units with 10 I/O points can be expanded to 34 I/O points.
Expansion I/O Units cannot be connected to Economy-type
CPU Units.
Note: For notebook computers that do not have an RS-232C serial
port, connect the computer to the ZEN by connecting an
OMRON CS1W-CIF31 USB-Serial Conversion Cable to the
ZEN-CIF01 Connecting Cable.
Other Versatile Functions
• Use of a Memory Cassette makes it easy to copy and save
programs.
• Equipped with two analog input channels (CPU Units with DC
power supply only).
• Password function ensures security. (See note.)
• Multi-language display in six languages (English, Japanese,
German, French, Spanish, Italian). (See note.)
• Display user-set messages or analog-converted values. (See note.)
Note: Not supported for ZEN-@C2@@-@-V2 models.
■ Enhanced Features of V2 CPU Units
Improved Weekly Timer and Calendar Timer
Functions
RS-485 Communications Model Added to
Series
Note: Not supported for ZEN-@C2@@-@-V2 models.
Production line conditions can be remotely monitored by monitoring
the ZEN control status.
• The time precision has been increased.
Conventional model: 2-min difference/month
↓
-V2 models: 1ꢀ-s difference/month (at 2ꢀ°C)
• Multiple-day operation and pulse-output operation are now
possible.
• These improved functions are convenient for time-controlled
applications such as lighting and air conditioning control.
Production line
Office
More Precise Analog Input
Conventional model: 10% FS → -V2 models: 1.ꢀ% FS
DC power supply models are equipped with two analog inputs (0 to
10 V). There are four analog comparators. The increased precision
makes it even easier to use the Unit in simple control applications
with voltage, current, temperature, and other analog values.
Lighting control
Air conditioning control
Economy-type Added to the Series
• Economy-type CPU Units with a more affordable price have been
added to the series, although Expansion I/O Units cannot be
added.
8-digit Counter, 150-Hz Counter
• An 8-digit counter and 8-digit comparator have been added.
• The maximum count for DC power supply models is 1ꢀ0 Hz.
Twin-timer Operation Added
12 to 24 VDC Line Voltage Operation
Twin-timer operation allows you to set ON and OFF times separately,
greatly simplifying intermittent operation.
Operation is now possible with 12 VDC.
Expansion I/O Units have been reduced to
half-size (35 mm wide).
2
Programmable Relay ZEN V2 Units
■ Series Configuration
CPU Units
Power supply voltage: 100 to 240 VAC, 12 to 24 VDC, Output: Relay, transistor output
With LCD display, operation buttons, and calendar/clock function
LED type
10 I/O points
20 I/O points
10 I/O points
20 I/O points
ZEN-10C2@
ZEN-20C2@
This CPU Unit has no LCD,
operation buttons, or
calendar/clock function.
Communications type
Standard LCD type
Economy type
Standard LCD type
Economy type
(10 I/O points)
ZEN-10C1@
ZEN-10C3@
ZEN-10C4@
ZEN-20C1@
ZEN-20C3@
Expansion I/O Units
RS-48ꢀ communications
Expansion I/O Units
cannot be connected. type.
cannot be connected.
Expansion I/O Units
Only 3ꢀ-mm wide.
Power Supply Unit
Support Software
Allows easy programming and
operation simulation.
Same shape and design as ZEN.
24 VDC, 30 W
4 input, 4 output points
Programmable Relay ZEN V2 Units
3
Model Number Structure
■ Model Number Legend
Note: This model number legend includes combinations that are not available.
Please check “List of Models” for availability.
CPU Units
ZEN-@C@@@-@-V2
2 3 4
5
1
1. Number of I/O points
3. Input type
A: AC input
D: DC input
4. Output type
R: Relay
10: 6 inputs and 4 outputs (See note.)
20: 12 inputs and 8 outputs
2. Type classifier
1: Standard LCD type with display
2: LED type without display
T: Transistor
3: Economy type with display
(Expansion I/O Units cannot be connected.)
4: Communications type with display
5. Supply voltage
A: AC power supply
D: DC power supply
Note: The Communications-type CPU Unit has 6 inputs and 3 outputs.
Expansion I/O Units
ZEN-8E1@@
2 3 4
1
1. Number of I/O points
8: 4 inputs and 4 outputs
2. Unit version classifier
3. Input type
A: AC input
D: DC input
4. Output type
R: Relay
E1: Can connect to V2 CPU Units (See note.)
T: Transistor
Note: Use a ZEN-8E@@/-4E@ to connect to pre-V1 and V1 CPU Units.
This data sheet is provided as a guideline for selecting products. Be sure to refer to the following user manuals for application precautions
and other information required for operation before attempting to use the product.
ZEN Operation Manual (Cat. No. Z211)
ZEN Communications Manual (Cat. No. Z212)
ZEN Support Software Operation Manual (Cat. No. Z184-E1-03)
The PDF versions of these manuals can be downloaded from the following website.
ZEN Website http://www.zen.omron.co.jp/eng/index.html
4
Programmable Relay ZEN V2 Units
Ordering Information
■ List of Models
CPU Units and Expansion I/O Units
Unit
Name
No. of
I/O
points
LCD
display
Power supply
voltage
Inputs
Outputs
Buttons,
calendar,
and clock
Analog
input
Model
CPU
Standard
LCD type
10
20
10
20
Yes
100 to 240 VAC
12 to 24 VDC
6
100 to 240 VAC
12 to 24 VDC
4
8
4
8
Relays
Yes
No
ZEN-10C1AR-A-V2
ZEN-10C1DR-D-V2
ZEN-10C1DT-D-V2
ZEN-20C1AR-A-V2
ZEN-20C1DR-D-V2
ZEN-20C1DT-D-V2
ZEN-10C2AR-A-V2
ZEN-10C2DR-D-V2
ZEN-10C2DT-D-V2
ZEN-20C2AR-A-V2
ZEN-20C2DR-D-V2
ZEN-20C2DT-D-V2
ZEN-10C3AR-A-V2
ZEN-10C3DR-D-V2
ZEN-20C3AR-A-V2
ZEN-20C3DR-D-V2
Units
Yes
Transistors
Relays
100 to 240 VAC
12 to 24 VDC
12 100 to 240 VAC
12 to 24 VDC
No
Yes
Transistors
Relays
LED type
without
No
100 to 240 VAC
12 to 24 VDC
6
100 to 240 VAC
12 to 24 VDC
No
No
Yes
display
(See note 1.)
Transistors
Relays
100 to 240 VAC
12 to 24 VDC
12 100 to 240V AC
12 to 24 VDC
No
Yes
Transistors
Relays
Economy
type
(Expansion
I/O Units
cannot be
connected)
10
20
Yes
100 to 240 VAC
12 to 24 VDC
100 to 240 VAC
12 to 24 VDC
6
100 to 240 VAC
12 to 24 VDC
4
8
Yes
No
Yes
No
12 100 to 240 VAC
12 to 24 VDC
Relays
Relays
Yes
Communica- 10
tions type
100 to 240 VAC
12 to 24 VDC
6
100 to 240 VAC
12 to 24 VDC
3
No
ZEN-10C4AR-A-V2
ZEN-10C4DR-D-V2
ZEN-KIT01-EV4
Yes
ZEN Kit
Set containing CPU Unit (ZEN-10C1AR-A-V2), Connecting Cable, ZEN Support Software, and manual.
Set containing CPU Unit (ZEN-10C1DR-D-V2), Connecting Cable, ZEN Support Software, and manual.
ZEN-KIT02-EV4
Expansion I/O Units
8
---
100 to 240 VAC
12 to 24 VDC
---
4
100 to 240 VAC
4
Relays
---
ZEN-8E1AR
(See notes 2, 3.)
12 to 24 VDC
ZEN-8E1DR
(See note 2.)
Transistors
ZEN-8E1DT
(See note 2.)
Note: 1. Programming is not possible using only the CPU in the LED-type CPU Unit. ZEN Support Software or a Memory Cassette is required.
2. Cannot be connected to pre-V1 and V1 CPU Units.
3. The ZEN-8E1AR cannot be connected to a CPU Unit with DC power supply.
Power Supply Unit
Power ratings
Input voltage
100 to 240 VAC
Output voltage
24 VDC
Output current
Model
ZEN-PA03024
30 W
1.3 A
Note: Refer to the ZEN-PA03024 Datasheet (Cat. No. L103) for detailed specifications.
Programmable Relay ZEN V2 Units
ꢀ
Accessories (Order Separately)
Name
Specifications
Remarks
Model
Memory Cassette EEPROM (for data
security and copying)
Enables programs and parameter settings to be saved or copied to another
ZEN. (See note 1.)
ZEN-ME01
LCD-type CPU Unit with LED-type CPU Unit without
display (See note 2.)
display (See note 3.)
Transfer from ZEN to
Memory
Supported
Not supported
Transfer from Memory Supported
Cassette to ZEN
Automatic transfer when
power turned ON
Memory Cassette
initialization
Supported
Not supported
Connecting Cable 2 m RS-232C (9-pin D-
sub connector)
---
ZEN-CIF01
Battery Unit
10 years min. Battery life Ladder programs and parameter settings are saved to the CPU Unit EEP-ROM ZEN-BAT01
(at 2ꢀ°C)
but calendar, clock, and holding timer bits and holding timer/counter present
values are held by the capacitor. Therefore, if the power supply is interrupted
for 2 days or more (at 2ꢀ°C), this data will be reset. Use a Battery Unit for
systems where the power supply may be interrupted for long periods.
ZEN Support
Software
Runs on Windows 9ꢀ, 98, Specifically designed for the ZEN (CD-ROM).
2000, ME, XP, or NT 4.0.
ZEN-SOFT01-V4
Note: 1. Memory Cassettes created using a CPU Unit can be read to other CPU Units, regardless of which model is used. Restrictions, apply, however, to
the functions that can be used, depending on the CPU Unit version combination. For details, refer to “Memory Cassette and CPU Unit
Combinations” on page 33.
2. Standard LCD-type, Economy-type, and Communications-type CPU Units (i.e., excluding ZEN-@C2@@-@-V2 models).
3. LED-type CPU Unit without display (i.e., ZEN-@C2@@-@-V2 models).
Mounting Accessories (Order Separately)
Name
Specifications
Model
Mounting Track
ꢀ0 cm (l) × 7.3 mm (t) PFP-ꢀ0N
1 m (l) × 7.3 mm (t)
1 m (l) × 16 mm (t)
PFP-100N
PFP-100N2
PFP-M
End Plate
Spacer
PFP-S
System Configuration
Expansion I/O Units
Power Supply Unit
CPU Unit
Battery Unit
Connecting Cable
Memory Cassette
Support Software
Note: 1. Up to 3 Expansion I/O Units can be connected to any type of CPU Unit except for Economy-type CPU Units. Expansion I/O Units with AC Inputs,
however, cannot be connected to CPU Units with DC Power Supplies.
2. The Connecting Cable and Memory Cassette cannot be connected to the ZEN at the same time.
3. Programs cannot be written to LED-type CPU Units (i.e., ZEN-@C2@@-@-V2 models) without the ZEN Support Software or a Memory Cassette.
6
Programmable Relay ZEN V2 Units
Specifications
■ Ratings
Item
Specification
ZEN-@C@AR-A-V2/ZEN-8E1AR
100 to 240 VAC, ꢀ0/60 Hz
ZEN-@C@D@-D-V2/ZEN-8E1D@
12 to 24 VDC (DC ripple rate: ꢀ% max.)
10.8 to 28.8 VDC
Rated supply voltage
Operating voltage range
Power consumption
8ꢀ to 264 VAC
CPU Units without Expansion I/O Units
• ZEN-10C1AR-A-V2/ZEN-10C2AR-A-V2/
ZEN-10C3AR-A-V2
CPU Units without Expansion I/O Units
• ZEN-10C@DR-D-V2
12/24 V DC: 3 W max.
100 V AC: ꢀ VA max.
(ZEN-10C3DR-D-V2: 2.8 W max.)
240 V AC: 7 VA max.
• ZEN-10C@DT-D-V2
• ZEN-10C4AR-A-V2
100 V AC: 6 VA max.
240 V AC: 8 VA max.
12/24 V DC: 2 W max.
• ZEN-20C@DR-D-V2
12/24 V DC: 4 W max.
• ZEN-20C@AR-A-V2
100 V AC: 7 VA max.
240 V AC: 10 VA max.
• ZEN-20C@DT-D-V2
12/24 V DC: 2 W max.
CPU Units with three Expansion I/O Units
• ZEN-10C@DR-D-V2
12/24 V DC: 4 W max.
• ZEN-10C@DT-D-V2
12/24 V DC: 3 W max.
• ZEN-20C@DR-D-V2
12/24 V DC: ꢀ W max.
• ZEN-20C@DT-D-V2
12/24 V DC: 3 W max.
CPU Units with three Expansion I/O Units
• ZEN-10C1AR-A-V2/ZEN-10C2AR-A-V2
100 V AC: 6 VA max.
240 V AC: 8 VA max.
• ZEN-10C4AR-A-V2
100 V AC: 7 VA max.
240 V AC: 9 VA max.
• ZEN-20C@AR-A-V2
100 V AC: 8 VA max.
240 V AC: 11 VA max.
Expansion I/O Units
• ZEN-8E1DR
12/24 V DC: 2 W max.
Expansion I/O Units
• ZEN-8E1AR
100 V AC: 3 VA max.
240 V AC: 4 VA max.
Inrush current
ZEN-10C@AR-A-V2: 4.ꢀ A max.
ZEN-20C@AR-A-V2: 4.ꢀ A max.
ZEN-10C@D@-D-V2: 30 A max.
ZEN-20C@D@-D-V2: 30 A max.
ZEN-8E1AR:
4 A max.
ZEN-8E1DR:
1ꢀ A max.
Ambient temperature
0 to ꢀꢀ°C (−2ꢀ to ꢀꢀ°C for ZEN-@C2@@-@-V2 models)
Ambient storage temperature −20 to 7ꢀ°C (−40 to 7ꢀ°C for ZEN-@C2@@-@-V2 models)
Ambient humidity
Ambient conditions
Mounting method
10% to 90% (with no condensation)
No corrosive gases
Surface mounting, DIN track mounting (standard (vertical) installation and horizontal installation) (See notes 1
and 2.)
Terminal block
Solid-line terminal block (use solid wire or fine-stranded wire)
0.ꢀ6ꢀ to 0.6 N·m (ꢀ to ꢀ.3 in-lb)
Terminal screw tightening
torque
Degree of protection
IP20 (Mounted inside a control panel)
Note: 1. Can be mounted to 3ꢀ-mm DIN Track.
2. Standard (Vertical) installation
Horizontal installation
Programmable Relay ZEN V2 Units
7
■ Characteristics
Item
Specification
Control method
Stored program control
Cyclic scan
I/O control method
Programming language
Program capacity
Ladder diagram
96 lines (3 input conditions and 1 output per line)
Max. No. of control I/O points 44 points (See note 1.)
CPU Units with 20 I/O points: 12 inputs and 8 outputs
Expansion I/O Units: 4 inputs and 4 outputs each, up to 3 Units.
LCD display (See note 2.)
12 characters × 4 lines, with backlight
Operation buttons (See note 2.) 8 (4 cursor buttons and 4 operation buttons)
User program backup
Power interruption hold
Internal EEPROM, Memory Cassette (optional)
Internal holding bit status, holding timer/counter present values, calendar and clock (year, month, day of month,
day of week, time)
• Super capacitor backup time:2 days min. (2ꢀ°C)
• Life of optional battery:
10 years min. (2ꢀ°C)
Calendar and clock function
(See note 2.)
Accuracy: 1ꢀ s/month (at 2ꢀ°C)
Timer accuracy
0.01 s unit: −0.0ꢀ% −10 ms max. (rate for set value)
min/s unit: −0.0ꢀ% −1 s max. (rate for set value)
h/min unit: −0.0ꢀ% −1 min max. (rate for set value)
Maximum counting speed
Insulation resistance
1ꢀ0 Hz: 8-Digit counter (F) set to high-speed operations (CPU Units with DC power supplies only)
(The counting speed may be less than 1ꢀ0 Hz depending on the cycle time of the program. See page 21.)
20 MΩ (at ꢀ00 VDC) min.:
Between power supply terminals and all output terminals.
Between terminals of different output circuits.
Between all terminals of CPU Unit and all terminals of Expansion I/O Unit.
Insulation
• Reinforced insulation
Between power supply or input terminals and output terminals.
Between terminals of different output circuits.
Between all terminals of CPU Unit and all terminals of Expansion I/O Unit.
• No separation
Between power supply and input terminals of the same unit.
Between power supply terminals of CPU Unit and computer connector,
Battery Unit connector, or all Expansion Unit connectors (all interfaces are live parts).
Dielectric strength
Vibration resistance
2,300 VAC, ꢀ0/60 Hz for 1 min (leakage current 1 mA max.):
Between power supply terminals and all output terminals.
Between terminals of different output circuit.
Between all terminals of CPU Unit and all terminals of Expansion I/O Unit.
Conforms to IEC60068-2-6, ꢀ to 9 Hz with 3.ꢀ-mm single amplitude, 9 to 1ꢀ0 Hz acceleration 9.8 m/s2,
10 sweeps each in X, Y, and Z directions (1 octave/min)
Conforms to IEC60068-2-27, 147 m/s2, 3 times each in X, Y, and Z directions.
Shock resistance
Weight
CPU Unit with 10 I/O points: Approx. 300 g max.
CPU Unit with 20 I/O points: Approx. 3ꢀ0 g max.
Expansion I/O Unit:
Approx. 120 g max.
Note: 1. Up to 34 points for CPU Units with 10 I/O points. With Communications-type CPU Units, however, the CPU Unit has 6 inputs and 3 outputs, for a maximum
of 33 I/O points.
2. Not provided for LED-type CPU Unit without display (i.e., ZEN-@C2@@-@-V2 models).
■ Communications Specifications (Communications-type CPU Units)
Item
Communications
Synchronization method
Baud rate
ZEN-10C4@R-@-V2
RS-48ꢀ (two-wire, half duplex)
Start-stop synchronization
4800, 9600, or 19200 bps
ASCII
Transmission code
Data bit length
Stop bit length
Error detection
Flow control
7 or 8 bits
1 or 2 bits
Vertical parity (none, even, odd), Block check character (BCC)
None
Interface
RS-48ꢀ
Retry function
Node number
None
0 to 99 (default: 1), XX (broadcasting)
8
Programmable Relay ZEN V2 Units
■ Approved Standards
Item
Specification
Safety standards
cULus: ULꢀ08/CSA C22.2 No.142 Class I Div2
Conforms to EN/IEC 61131-2 clause 11, excluding 11.7.2.2 (Overvoltage category 2 and Pollution degree II
conforms to IEC 60664-1)
EMC
(See note.)
Radiation Field Emission
Noise Terminal Voltage Emission
CISPR11
CISPR11
Class A, Group 1
Class A, Group 1
Electrostatic Discharge Immunity
Electromagnetic Field Immunity
Electrical Fast Transient/Burst Immunity
IEC61000-4-2
IEC61000-4-3
IEC61000-4-4
In air: 8 kV, In contact: 6 kV
10 V/m
Power line
AC I/O: 2 kV
DC I/O: 1 kV
Normal Noise
Surge Immunity
IEC61000-4-ꢀ
AC power supply, AC I/O: 1 kV
DC power supply, DC I/O: 0.ꢀ kV
Common Noise
AC power supply, AC I/O: 2 kV
DC power supply: 1 kV
DC I/O: 0.ꢀ kV
Immunity to Conducted Disturbances Induced by Radio-frequency Fields
IEC61000-4-6
IEC61131-2
3 V
Momentary Power Interruption Immunity
CPU Units with AC Power Supplies:
10 ms max.
CPU Units with DC Power Supplies:
2 ms max. (level: PS1)
Note: EMC conforms to EN 61131-2 clause 8 except in the following cases.
• When Expansion I/O Units with DC inputs are connected to a CPU Unit with an AC power supply, the burst immunity between power
supplies will be 1 kv.
• When the signal wire for transistor outputs exceeds 10 m, the surge immunity of DC output signal lines will not conform.
■ Input Specifications
CPU Units
AC Inputs (Not Isolated)
Item
Input voltage
Specifications
100 to 240 VAC +10%, −1ꢀ%, ꢀ0/60 Hz
680 kΩ
0.1ꢀ mA/100 VAC, 0.3ꢀ mA/240 VAC
80 VAC min.
Circuit drawing
Input impedance
Input current
IN
330 kΩ 300 kΩ
IN
Internal
circuit
ON voltage
ꢀ1 kΩ
OFF voltage
2ꢀ VAC max.
100 to 240 VAC
ON response time
OFF response time
ꢀ0 ms or 70 ms at 100 VAC (See note.)
100 ms or 120 ms at 240 VAC (See note.)
N
L
Note: Can be selected using the filter settings.
DC Inputs: I0 to I3 for Units with 10 I/O points, I0 to I9 for Units with 20 I/O Points (Not Isolated)
Item
Input voltage
Specifications
12 to 24 VDC +20%, −10%
Circuit drawing
Input impedance
Input current
ꢀ.3 kΩ
4.ꢀ mA (typ.)/24 VDC
8 VDC min.
IN
ꢀ.1 kΩ 1.8 kΩ
IN
12 to 24 VDC
ON voltage
Internal
circuit
OFF voltage
ꢀ VDC max.
COM
ON response time
OFF response time
1ꢀ ms or ꢀ0 ms (See note.)
Note: Can be selected using the input filter settings, except when I0 is being used for an 8-digit counter with a high-speed input.
Programmable Relay ZEN V2 Units
9
DC Inputs: I4 and I5 for Units with 10 I/O points, Ia and Ib for Units with 20 I/O Points
(Not Isolated)
Item
Specifications
12 to 24 VDC +20%, −10%
Circuit drawing
DC Inputs Input voltage
Input impedance
PNP:
ꢀ.ꢀ kΩ/14 VDC min.
100 kΩ/14 VDC max.
ꢀ.2 kΩ
NPN:
1ꢀ0 kΩ
27 kΩ
Input current
PNP:
NPN:
4.3 mA (typ.)/24 VDC
4.6 mA (typ.)/24 VDC
IN
+
47 kΩ
ON voltage
OFF voltage
8 VDC min.
3 VDC max.
6.2 kΩ
220 kΩ
ON response time 1ꢀ ms or ꢀ0 ms (See note.)
OFF response time
−
COM
12 to 24 VDC
Analog
Inputs
Input range
0 to 10 V
47 kΩ
External input
impedance
100 kΩ min.
ꢀ.6 kΩ
Resolution
Accuracy
0.1 V (1/100 FS)
1.ꢀ% FS (at ambient operating temperature within
rated range)
AD conversion data 0 to 10.ꢀ V (in increments of 0.1 V)
Note: Can be selected using the input filter settings.
Expansion I/O Units
AC Inputs (Not Isolated)
Item
Specifications
Circuit drawing
Input voltage
100 to 240 VAC +10%, −1ꢀ%, ꢀ0/60 Hz
680 kΩ
0.1ꢀ mA/100 VAC, 0.3ꢀ mA/240 VAC
80 VAC min.
Input impedance
Input current
IN
IN
330 kΩ 300 kΩ
ꢀ1 kΩ
ON voltage
100 to
240 VAC
OFF voltage
2ꢀ VAC max.
N
L
ON response time
Off response time
ꢀ0 ms or 70 ms at 100 VAC (See note.)
100 ms or 120 ms at 240 VAC (See note.)
Note: Can be selected using the input filter settings.
DC Inputs (ZEN-8E1DR: Not Isolated, ZEN-8E1DT: Photocoupler Isolated)
Item
Input voltage
Specifications
12 to 24 VDC +20%, −10%
6.ꢀ kΩ
3.7 mA (typ.)/24 VDC
8 VDC min.
Circuit drawing
IN
IN
Input impedance
Input current
6.2 kΩ
1.8 kΩ
(See
note 2.)
ON voltage
Internal
circuit
12 to
24 VDC
OFF voltage
ꢀ VDC max.
COM
ON response time
OFF response time
1ꢀ ms or ꢀ0 ms (See note 1.)
Note: 1. Can be selected using the input filter settings.
2. The ZEN-8E1DT has no +/- terminals. There is no need to supply power.
10
Programmable Relay ZEN V2 Units
■ Output Specifications (CPU Units and Expansion I/O Units)
Units with Relay Outputs
Item
Specifications
Circuit drawing
Maximum switching capacity 2ꢀ0 VAC/8 A (resistive load: cosφ = 1)
24 VDC/ꢀ A (resistive load)
Use the following values for the total of all outputs.
CPU Units with 10 I/O points:20 A max.
(1ꢀ A max. for Communications-type CPU Units)
CPU Units with 20 I/O points:40 A max.
Q0 to Q3/OUT0 to OUT3
L
Expansion I/O Units:
20 A max.
Q4/Q6
L
Minimum switching capacity ꢀ VDC/10 mA (resistive load)
COM
Relay life
Electrical
Resistive load: ꢀ0,000 times (cosφ = 1)
Inductive load: ꢀ0,000 times (cosφ = 0.4)
10 million times
Models with
20 I/O points
only
Mechanical
L
ON response time
OFF response time
1ꢀ ms max.
Qꢀ/Q7
ꢀ ms max.
The life under the worst conditions, of the output contacts used in
ZEN relay outputs is given in the above table. Guidelines for the
normal life of the relays are shown in the diagram on the right.
Life-test Curve (Reference Value)
Usage: 360 times/hour
1,000
2ꢀ0-VAC resistive load
24-VDC resistive load/
2ꢀ0-VAC inductive load
24-VDC inductive load
(t = 7 ms)
Note: The switching capacity, switching durability, and applicable
load area when actually using the relay depend on the type of
load, environmental conditions, and switching conditions.
Therefore, be sure to confirm these conditions for the actual
machine before use.
ꢀ00
300
100
ꢀ0
30
10
0
2
4
6
8
10
Contact current (A)
Units with Transistor Outputs
Item
Specifications
Circuit drawing
Maximum switching capacity 24 VDC +20%, ꢀ00 mA
Each circuit is configured with an independent common
circuit
Q0 to Q3/OUT0 to OUT3
390 Ω
Leakage current
Residual voltage
ON response time
OFF response time
0.1 mA max.
1.ꢀ V max.
1 ms max.
1 ms max.
L
28.8 VDC max.
L
1 kΩ
COM
Internal
circuit
+
28.8 VDC max.
L
Models with
20 I/O points
only
Q4/Q6
L
Qꢀ/Q7
Programmable Relay ZEN V2 Units
11
Connections
■ Input Connections
Units with AC Power Supply
Note: 1. Supply power to both the CPU Unit and Expansion I/O Units from the same power supply and turn them ON and OFF at the same time.
2. The input circuit commons for CPU Units with AC power supply are internally connected to the N terminal of the power supply circuit.
Wire the L terminal to the power supply of the input device.
3. The input circuit commons for Expansion I/O Units with AC power supply are internally connected to the N terminal of the power supply
circuit. Wire the L terminal to the power supply of the input device.
CPU Units with 10 I/O Points and Expansion I/O Units
100 to 240 VAC, ꢀ0/60 Hz
L
N
Circuit
protector
Input device
L
N
NC I0
I1 I2 I3 I4 Iꢀ
L
N
IN0 IN1 IN2 IN3
CPU Unit with 10 I/O points
ZEN-8E1AR Expansion
I/O Unit (AC input type)
CPU Units with 20 I/O Points and Expansion I/O Units
100 to 240 VAC, ꢀ0/60 Hz
L
N
Circuit
protector
Input device
L
N
NC I0 I1 I2 I3 I4 Iꢀ
NC I6 I7 I8 I9 Ia Ib
L
N
IN0 IN1 IN2 IN3
CPU Unit with 20 I/O points
ZEN-8E1AR
Expansion I/O Unit
(AC input type)
Connecting Expansion I/O Units with DC Inputs
100 to 240 VAC, ꢀ0/60 Hz
DC power supply
N
L
Circuit
protector
Input
device
Input
device
L
N
NC I0
I1 I2 I3 I4 I5
COM IN0 IN1 IN2 IN3
COM IN0 IN1 IN2 IN3
ZEN-8E1DT
Expansion I/O Unit
(DC inputs and
ZEN-8E1DR
CPU Unit with 10 I/O points
Expansion I/O Unit
(DC inputs and
relay outputs)
transistor outputs)
Note: When connecting Expansion I/O Units with DC inputs to a CPU Unit with an AC power supply, the burst noise immunity will be 1 kV
(IEC 61000-4-4).
12
Programmable Relay ZEN V2 Units
Units with DC Power Supply
Note: 1. Be sure to connect the COM terminal before turning ON the power supply. If the COM terminal is disconnected, or if the wiring is changed
after turning ON the power supply, a malfunction may occur.
2. Apply the power supply voltage through a relay or switch in such a way that the voltage reaches the rated value within 4 s. If the voltage
is applied gradually, the power may not be reset or unstable output operations may result.
CPU Units with 10 I/O Points
For Connections to Negative (−) Common (PNP Connection)
12 to 24 VDC
Input device
COM
CPU Unit with 10 I/O points
For Connecting Analog Input Devices to Input Terminals I4 and I5
12 to 24 VDC
I0 I1 I2 I3 I4 I5
COM
CPU Unit with 10 I/O points
Note: When connecting an analog input device, always connect the negative side to the COM terminal.
For Connections to Positive (+) Common (NPN Connection)
12 to 24 VDC
Input
device
COM I0
I1 I2 I3 I4 Iꢀ
+
−
CPU Unit with 10 I/O points
Note: When connected to the positive (+) common, I4 and Iꢀ cannot be used as analog inputs.
Programmable Relay ZEN V2 Units
13
CPU Units with 20 I/O Points
For Connections to a Negative Common (PNP Connection)
12 to 24 VDC
Input device
COM I0 I1 I2 I3 I4 I5
NC I6 I7 I8 I9 Ia Ib
CPU Unit with 20 I/O points
For Connecting Analog Input Devices to Input Terminals Ia and Ib
12 to 24 VDC
COM I 0 I 1 I 2 I 3 I4 I5
NC I6 I 7 I 8 I 9 I a Ib
CPU Unit with 20 I/O points
Note: When connecting an analog input device, always connect the negative side to the COM terminal.
For Connections to Positive (+) Common (NPN Connection)
12 to 24 VDC
Input device
COM I0 I1 I2 I3 I4 Iꢀ
NC I6 I7 I8 I9 Ia Ib
+
−
CPU Units with 20 I/O points
Note: When connected to the positive (+) common, Ia and Ib cannot be used as analog inputs.
Expansion I/O Units
Note: 1. Supply power to both the CPU Unit and Expansion I/O Units from the same power supply and turn them ON and OFF at the same time.
2. ZEN-8E1AR Expansion I/O Units with AC inputs cannot be connected to CPU Units with DC power supply.
3. The input circuit commons for ZEN-8E1DR Expansion I/O Units with relay outputs are each internally connected to one side of the power
supply circuit (COM terminal).
4. ZEN-8E1DT Expansion I/O Units with transistor outputs do not need to be connected to a power supply.
For Connections to Negative (−) Common
12 to 24 VDC
Input
device
Input
device
COM I0 I1 I2 I3 I4 Iꢀ
COMIN0 IN1 IN2 IN3
NC COMIN0 IN1 IN2 IN3
+
−
CPU Unit with 10 I/O points
ZEN-8E1DR
ZEN-8E1DT
Expansion I/O Unit
(DC input, relay output)
Expansion I/O Unit
(DC input, transistor output)
For Connections to Positive (+) Common
12 to 24 VDC
Input
device
Input
device
COM I0 I1 I2 I3 I4 Iꢀ
COMIN0 IN1 IN2 IN3
NCCOMIN0 IN1 IN2 IN3
+
−
CPU Unit with 10 I/O points
ZEN-8E1DR
ZEN-8E1DT
Expansion I/O Unit
Expansion I/O Unit
(DC input, relay output)
(DC input, transistor output)
14
Programmable Relay ZEN V2 Units
■ Output Connections
Units with Relay Outputs
All four relay output circuits in both CPU Units with 10 I/O points and Expansion I/O Units have independent contacts. CPU Units with 20 I/O points
have 4 independent contacts (Q0 to Q3) and the remaining four (Q4 to Q7) have 2 points/common. There are no restrictions for polarity.
Standard LCD-type CPU Units, LED-type CPU Units, and Economy-type CPU Units
CPU Unit with 10 I/O Points
CPU Unit with 20 I/O Points
Q0
Q1
Q2
Q3
Q0
Q1
Q2
Q3
Q4
Qꢀ
Q6
Q7
Communications-type CPU Units
Expansion I/O Units
Communications-type CPU Unit
Expansion I/O Unit
OUT
2
OUT
3
B (+) A (−)
Q0
Q1
Q2
OUT OUT
RS-48ꢀ
0
1
Units with Transistor Outputs
For CPU Units with 10 I/O points and Expansion I/O Units, all 4 outputs in the transistor output circuits have independent circuits. The terminals of
output have polarity given on the terminal block, but no problem will result from reversing the connection positions of the power supply and load.
For CPU Units with 20 I/O points, outputs Q0 to Q3 in the transistor output circuits have independent circuits and outputs Q4 to Q7 have 2 points
per common. The terminals of output Q0 to Q3 have polarity given on the terminal block, but no problem will result from reversing the connection
positions of the power supply and load.
Note: Do not exceed a cable length of 10 m when connecting transistor outputs.
Standard LCD-type CPU Units and LED-type CPU Units without Display
CPU Unit with 10 I/O Points
CPU Unit with 20 I/O Points
+
−
+
−
+
−
+
−
−
+
−
−
+
−
+
−
+
−
+
−
+
−
Q0
Q1
Q2
Q3
Q0
Q1
Q2
Q3
Q4 Qꢀ
Q6 Q7
Q0 to Q3
Q0 to Q3
Expansion I/O Units
Expansion I/O Unit
+
−
+
−
OUT2
OUT3
+
−
+
−
OUT0 to OUT3
OUT0
OUT1
Programmable Relay ZEN V2 Units
1ꢀ
Nomenclature
■ Standard LCD-type, Economy-type, and Communications-type CPU
Units (Except for ZEN-@C2@@-@-V2 Models)
CPU Units with 10 I/O Points
Left side
Front
Right side
Power supply Input
terminals
terminals
Operation
buttons
Display
screen
Display Screen
Output terminals
(See note 1.)
Expansion Unit connector
cover (See note 2.)
Do not remove this cover until
connecting an Expansion Unit.
RUN ERR
Battery Unit connector
(Remove the seal to
connect the Battery Unit.)
ZEN Support Software connector
(also used for Memory Cassette.)
Icon Meanings
Icon
Meaning
CPU Units with 20 I/O Points
RUN
ERR
▲
Display while in RUN mode.
Indicates an error.
Left side
Front
Right side
Displayed when there is a
higher-level menu or ladder
program line than the one
currently displayed.
Power supply
terminals
Input terminals
I
6
I
7
I
8
I
9
I
a
I b
▼
Displayed when there is a
lower-level menu or ladder
program line than the one
currently displayed.
20C1AR-A-V2
Operation
buttons
Display
screen
Displayed when a password
had been set.
Q
4
Q
5
Q6
Q7
Expansion Unit connector
cover (See note 2.)
Do not remove this cover until
connecting an Expansion Unit.
Output terminals
Battery Unit connector
(Remove the seal to
connect the Battery Unit.)
ZEN Support Software connector
(also used for Memory Cassette.)
Note: 1. With Communications-type CPU Units, the Q3 terminal is used as the RS-48ꢀ terminal. For details, refer to “Output Connections” on page
1ꢀ.
2. Economy-type CPU Units are not provided with an Expansion Unit connector. Do not remove the cover.
16
Programmable Relay ZEN V2 Units
Operation Buttons
DEL Button
ALT Button
Operation Button Names and Operations
Button
Function
Menus
Writing ladder program
Setting parameters Button input
bit
(See page 24.)
Cursor
Buttons
DEL
ALT
---
---
Deletes inputs, outputs, connection ---
lines, and blank lines.
B6 ON
B7 ON
• Switches between normally open ---
and normally closed conditions.
• Changes to connection line write
mode.
ESC Button
OK Button
• Inserts a line.
Up
Movesthecursor • Moves the cursor up and down. • Moves the cursor up Bꢀ ON
up and down.
and down.
• Selects bit types and functions.
• Changes numerals
and parameters.
Down
Left
B2 ON
---
Moves the cursor right and left.
Moves the cursor right B3 ON
and left.
Right
B4 ON
ESC
OK
Returns to the
Cancels the setting and returns to Cancels the setting
B0 ON
previous screen. the previous operation.
and returns to the
previous operation.
Selects the
menu item at the
cursor position.
Confirms the setting.
Confirms the setting. B1 ON
Programmable Relay ZEN V2 Units
17
■ LED-type CPU Units without Display (ZEN-@C2@@-@-V2)
CPU Units with 10 I/O Points
Left side
Front
Right side
Power supply
terminals
Input
terminals
LED indicators
LED Indicators
Name
LED
Status
Power is ON.
Expansion Unit connector
cover
Do not remove this cover until
connecting an Expansion Unit.
Output terminals
POWER
Green Lit
Battery Unit connector
(Remove the seal to connect
the Battery Unit.)
ZEN Support Software connector
(also used for Memory Cassette.)
Not lit
Green Lit
Power is OFF.
RUN
Operating
(RUN)
CPU Units with 20 I/O Points
Not lit
Lit
Not lit
Stopped
(STOP)
Left side
Front
Right side
Power supply
terminals
Input terminals
ERROR
Red
Error
occurred.
I
6
I
7
I
8
I
9
I
a
I b
Normal
20C2AR-A-V2
Q
4
Q
5
Q
6
Q7
Output terminals
Expansion Unit connector cover
Do not remove this cover until
connecting an Expansion I/O Unit.
Battery Unit connector
(Remove the seal to
connect the Battery Unit.)
ZEN Support Software connector
(also used for Memory Cassette.)
LED indicators
■ Expansion I/O Units (ZEN-8E1@@)
Left side
Front
Right side
Power supply terminals
Input terminals
Output terminals
Expansion I/O Unit connector cover
Do not remove this cover until connecting
an Expansion I/O Unit.
Expansion I/O Unit connector
Precaution when Using Expansion I/O Units:
Up to three Expansion I/O Units can be connected.
Phillips screwdriver
Flat-blade screwdriver
When removing the Expansion Unit connector cover from the side of the CPU Unit, use a
Phillips screwdriver to remove the cover screw, and then insert a flat-blade screw driver in
the cover gap to remove the cover, as shown at the right.
18
Programmable Relay ZEN V2 Units
Operation
■ Bits
Name
Symbol
Bit
No. of
Operation
Details
(See
note 1.)
addresses points
Input bits
I
I0 to Ib
12
12
8
Reflect the ON/OFF status of the input devices connected to the input
terminals on the CPU Unit.
(See note 2.)
---
Expansion input bits
Output bits
X
Q
Y
M
H
T
X0 to Xb
Reflect the ON/OFF status of the input devices connected to the input
terminals on the Expansion I/O Units.
Q0 to Q7
(See note 2.)
The ON/OFF status of these output bits is used to control the output devices
connected to the output terminals on the CPU Unit.
Expansion output bits
Work bits
Y0 to Yb
M0 to Mf
H0 to Hf
T0 to Tf
12
16
16
16
The ON/OFF status of these output bits is used to control the output devices
connected to the output terminals on the Expansion I/O Units.
1
Work bits can be used only within the ZEN program. I/Os for external devices
cannot be made (i.e., all I/O is internal).
Holding bits
Timers
Used the same as the work bits. However, if the power to the ZEN is turned
OFF, these bits also maintain the previous ON/OFF status.
X: ON-delay timer
Functions are
selected from the
screen when
parameter settings
are made.
Time units can be selected
from the following:
0.01-s unit: 0.01 to 99.99 s
min/s unit: 00 min 01 s to
99 min ꢀ9 s
■: OFF-delay timer
O: One-shot pulse
timer
2
h/s unit:
00 h 01 min to
99 h ꢀ9 min
F: Flashing pulse
timer
W: Twin timer
Holding timers
#
#0 to #7
8
Hold the present value being counted even if the trigger input or power supply
is turned OFF and continue timing when the trigger input or power is restored.
3
4
Counters
C
F
C0 to Cf
F0
16
1
Reversible 4-digit counters that can be incremented and decremented.
8-digit counter
Reversible 8-digit counters that can be incremented and decremented.
CPU Units with DC power supply support a high-speed counter up to 1ꢀ0 Hz.
For details, refer to “8-digit Counter Operation” on page 21.
5
Weekly timers
(See note 3.)
@
*
@0 to @f
*0 to *f
16
16
16
4
Turn ON and OFF during specified times on specified days.
6
7
8
9
Calendar timers
(See note 3.)
Turn ON and OFF between specified dates.
Display bits
(See note 3.)
D
D0 to Df
A0 to A3
P0 to Pf
Display user-specified messages, times, timer/counter present values, or
analog-converted values.
Analog comparator bits A
Used as program input conditions to output analog comparator comparison
results. These bits can be used only for CPU Units with DC power supply.
Timer/counter
comparator bits
P
16
Compare the present values of timers (T), holding timers (#), and counters
(C). Comparison can be made between the same two counters or timers, or
with constants.
10
8-digit counter
comparator bits
G
B
G0 to G3
B0 to B7
4
8
Used to compare the present values of 8-digit counters (F) and output the
comparison results.
11
12
Button input bits
(See note 3.)
Used as program input conditions and turn ON when operation buttons are
pressed in RUN Mode.
Note: 1. For details, refer to the indicated item numbers on the following pages.
2. CPU Units with 10 I/O points have 6 input bits (I0 to Iꢀ) and 4 output bits (Q0 to Q3). Output bit Q3 of Communications-type CPU Units,
however, cannot be output externally. It can be used as a work bit.
3. These input bits are not supported by LED-type CPU Units without display.
1. Additional Bit Output Functions
[: Normal
Set/Reset operation
A: Alternate
S: Set
R: Reset
I0
I1
I2
I3
[Q0
SQ1
RQ1
AQ2
I0
I1
I2
I3
Q0
Q1
Q1
Q2
Q0 will turn ON or OFF depending Q1 will stay ON once the execution Q1 is forced OFF when the
Q2 alternates between turning ON
and OFF when the execution
condition I3 turns ON.
on the ON/OFF status of the
execution condition I0.
condition I1 has turned ON once. A execution condition I2 is turned
reset is used to turn Q1 OFF. ON.
Programmable Relay ZEN V2 Units
19
2. Using Timers and Holding Timers
X: ON-delay timer
Turns ON after set delay after the trigger input turns ON.
Basic Operation
Trigger input
Reset input
Trigger input
Timing
Setting
Present value
Output
0
Main Applications
When delayed operation or a time lag is required.
Timer bit
■: OFF-delay timer
Stays ON while the trigger input is ON and turns OFF after a set delay
after the trigger input has turned OFF.
Basic Operation
Trigger input
Reset input
Trigger input
Setting
Timing
Present value
Output
0
Main Applications
Timer bit
Useful for OFF delay circuits for lights or fans
O: One-shot pulse timer
Turns ON for a set period after the trigger input turns ON and regardless
of how long the trigger input remains ON.
Basic Operation
Trigger input
Reset input
Trigger input
Timing
Setting
Present value
Output
0
Main Applications
Useful for set operations where operation is always required during a
regular period only.
Timer bit
F: Flashing pulse timer
Repeatedly turns ON and OFF in a set cycle while the trigger input is ON.
Basic Operation
Trigger input
Reset input
Trigger input
Timing
Timing
Timing
Timing
Setting
Output
Present value
0
Main Applications
Useful for flashing emergency lights or sounding buzzers as the output
for an alarm circuit.
Timer bit
W: Twin timer
Repeatedly turns ON and OFF in a set cycle while the trigger input is ON.
Independent ON- and OFF-time settings are possible.
Basic Operation
Trigger input
Reset input
Trigger input
ON-time
OFF-time
Timing
Timing
Timing
Timing
(OFF-time) (ON-time) (OFF-time) (ON-time)
Present value
Output
0
Timer bit
Main Applications
Useful for intermittent (ON/OFF) operation, such as that used for fans.
3. Using Holding Timers
X: ON-delay timer
Turns ON after set delay after the trigger input turns ON. The present
value is held while the trigger input is OFF.
Main Applications
Trigger input
Reset input
To continue operation after momentary power loss or power interruptions.
Also can be used when delayed operation or a time lag is required.
Setting
Present value
0
Timer bit
20
Programmable Relay ZEN V2 Units
4. Counter Operation
The counter bit turns ON when the counter value (present value)
reaches the set value (present value ≥ set value). The counter returns to
0 and the counter bit turns OFF when the reset input turns ON. Count
inputs are not accepted while the reset input is turned ON. The counter
present value and counter bit (ON/OFF) are held even if the operating
mode is changed or the power supply is interrupted.
Counter direction
specification input
Counter input
Reset input
Set value
Present value
0000
Counter bit
5. 8-digit Counter Operation
Count speed
Operation
The counter bit turns ON when the counter value (present value)
reaches the set value (present value ≥ set value). The counter
returns to 0 and the counter bit turns OFF when the reset input
turns ON. Count inputs are not accepted while the reset input is
turned ON. The counter present value and counter bit (ON/OFF)
are held even if the operating mode is changed or the power supply
is interrupted.
H
High
Counter direction
specification input
speed
Counter input
Reset input
Set value
L
Low
speed
High-speed Operation
Present value
For CPU Units with DC power supply, high-speed operation is
possible for input I0 only. (Maximum counting speed: 1ꢀ0 Hz)
00000000
Counter bit
Counting Speed of the 8-digit Counter
The maximum counting speed of the 8-digit counter is 1ꢀ0 Hz. When the ladder program volume is large, however, this speed will be less than 1ꢀ0
Hz. Calculate the cycle time and confirm the maximum counting speed using the following formula. The calculation serves as a guide only, so allow
a suitable margin in the actual machine.
Maximum counting speed = 1,000,000 Hz/
Hz
Cycle time (µs) × 2.2
Note: Even if the calculated maximum counting speed exceeds 1ꢀ0 Hz using this formula, the maximum counting speed will be 1ꢀ0 Hz.
Cycle Time Calculation Method
Cycle
time
(µs)
=
Common
processing
time
+
Processing time taken
when Expansion I/O
Units are connected
+
Ladder program
execution time
+
Communications
processing time (only
for CPU Units with
communications)
Refer to the following table for ZEN execution times. The execution times are provided as a guide. External factors, button operations, execution of
ZEN Support Software operations, and timing of the processing affects the actual processing times.
Common Processing Time
Ladder Program Execution Time
Unit type
Common processing time
8ꢀ0 µs
Per line
30 µs: Line containing program *1
7 µs: Empty lines
Standard LCD-type CPU Units,
Economy-type CPU Units, and
Communications-type CPU Units
Per output CPU Unit output bits (Q) 4 µs
*2
Expansion I/O Unit
output bits (Y)
LED-type CPU Units
200 µs
Work bits (M)
Expansion I/O Unit Processing Time
Holding bits (H)
Unit type
Expansion I/O Unit processing time
160 µs per Unit
Timers (T)/Holding
timers (#)
1ꢀ µs
13 µs
*3
Expansion I/O Units
Counters (C)/8-Digit
Counters (F)
Communications Processing Time (only for CPU Units with
Communications)
Display bits (D)
Hour and minute (CLK)/Year and
month (DAT)/Month and day
(DAT1): 21 µs
Reading information
Writing set values
170 µs
Timers (T)/Holding timers
(#)/Counters (C)/Analog
comparators: 28 µs
Twin timer: 11,000 µs
Others: 6,000 µs
Characters (CHR)/8-Digit
Counters (F): 38 µs
Writing time information
820 µs
Weekly timers (@)
4 µs
1 µs
3 µs
7 µs
4 µs
*4
*ꢀ
Calendar timers (*)
Analog comparators (A)
Comparators (P)
8-Digit Comparators (G)
Programmable Relay ZEN V2 Units
21
Example Calculation of Ladder Program Execution Time
Ladder program execution time =
I0
Q0
I3
I1
I2
00
01
02
03
04
[Q0
(30 × ꢀ) + (4 × 3) + 1ꢀ + 4 + 7 = 188 (µs)
*ꢀ: P0
*4: @0
[Q1
TT0
[Q2
I4
*3: T0 (output)
*2: Q (outputs) for 3 points
*1: For ꢀ lines
@0
P0
T0
6. Weekly Timer Operation (Only for Standard LCD-type, Economy-type, and Communications-
type CPU Units)
Weekly timer
mode
Operation
N
Normal
operation
Typical Timer Operation
Between Tuesday and Friday every week, the
weekly timer bit turns ON from 08:1ꢀ until
17:30.
Date setting
Wed Thurs
Mon
Tues
Fri
Sat
Sun
24:00
17:30
Stop time
Start time
8:1ꢀ
0:00
Weekly timer bit
Timer Operation Extending Past Midnight
Between Tuesday and Friday every week, the
weekly timer bit turns ON from 23:00 until 0ꢀ:00
the following day.
Date setting
Wed Thurs
Mon
Mon
Mon
Tues
Tues
Tues
Fri
Fri
Fri
Sat
Sat
Sat
Sun
Sun
Sun
24:00
23:00
Start time
Stop time
ꢀ:00
0:00
Weekly timer bit
D
P
Multiple-
day
The weekly timer bit turns ON from Tuesday
08:1ꢀ until Friday 17:30 every week.
Date setting
Wed Thurs
operation
24:00
Stop time
Start time
17:30
8:1ꢀ
0:00
Weekly timer bit
Pulse-
Every week, from Tuesday through Friday, the
weekly timer bit turns ON for 1ꢀ minutes and
thirty seconds from 08:1ꢀ.
Date setting
Wed Thurs
output
operation
24:00
Start time
8:1ꢀ
0:00
Weekly timer bit
Operation time setting:
1ꢀ minutes, 30 seconds
7. Calendar Timer Operation (Only for Standard LCD-type, Economy-type, and
Communications-type CPU Units)
Dec 31
End date Sep 1
Start date
Apr 1
Jan 1
Calendar timer bit
The calendar timer bit is ON between 1 April and 31 August.
22
Programmable Relay ZEN V2 Units
8. Display Settings (Only for Standard LCD-type, Economy-type, and Communications-type
CPU Units)
Backlight/display L0: No backlight; No switching to display function screen (See note 1.)
function screen
switching
L1: Backlight; No switching to display function screen (See note 1.)
L2: No backlight; Switching to display function screen (See note 2.)
L3: Backlight; Switching to display function screen (See note 2.)
Display start
position
X (digit): 00 to 11
Y (line): 0 to 3
X00
X11
Y0 to Y3
Display object
CHR
Characters (Up to 12 characters - English, numerals, symbols)
Month/day (ꢀ digits @@/@@)
DAT
CLK
hour/minute (ꢀ digits @@:@@)
I4 to Iꢀ
T0 to Tf
#0 to #7
C0 to Cf
F0
Analog-converted value (4 digits @@:@)
Timer present value (ꢀ digits @@.@@)
Holding timer present value (ꢀ digits @@.@@)
Counter present value (4 digits @@@@)
8-digit counter present value(8 digits @@@@@@@@)
Monitoring
A: Can read settings during operation.
D: Cannot read settings during operation.
Note: 1. When L0 or L1 are selected to disable the display function screen, the display function screen will not be displayed automatically. Use
operation buttons to move to the display function screen.
2. When L2 or L3 are selected, the ZEN switches to the display function screen if the display function is enabled and the specified data is
displayed. The Main Screen will no longer be displayed. To display the Main Screen, change the CPU Unit to STOP mode.
9. Analog Comparator Operation
• Example 1
(When comparison shows analog input
1 ≥ ꢀ.2 V)
• Example 2
(When comparison shows analog input 1 is ≤
analog input 2)
Setting
10.ꢀ
10.0
Converted value
10.0
Analog input 1
Analog input 2
ꢀ.2
10.ꢀ V
Input voltage
00.0
0.0
00.0
10.0 V
Analog
comparator bit
Analog
comparator bit
10. Timer/Counter Comparator Operation
• Example 1
(When comparison setting is holding
timer #0 ≥ 12 min 34 s)
• Example 2
(When comparison setting is counter 1 (C1) ≤
counter 2 (C2))
C1 present value
#0 present value
Setting
12 min 34 s
C2 present value
0
Comparator
bit
Comparator
bit
11. 8-digit Counter Comparator Operation
• When comparison setting is
8-digit counter F0 ≥ 12000000
F0 present value
12000000
0
8-digit counter
comparator
bit
Programmable Relay ZEN V2 Units
23
12. Specifications for Button Input Bits (Only for Standard LCD-type, Economy-type, and
Communications-type CPU Units)
The operation buttons are used to perform operations for input bits. They are useful when checking program operations or forcefully resetting
holding timers or counters.
ALT
Button input 7 (B7)
DEL
Button input 6 (B6)
Button input ꢀ (Bꢀ)
Button input 4 (B4)
Button input 3 (B3)
Button input 2 (B2)
OK
Button input 1 (B1)
ESC
Button input 0 (B0)
■ Password Function (Only for Standard LCD-type, Economy-type, and
Communications-type CPU Units)
The ZEN has a password function to prevent incorrect manipulation of ladder programs or settings data by other operators. When the password
(0000 to 9999) is set, the following operations will not be possible unless the password is input correctly.
• Editing ladder program
• Program all clear
• Monitoring ladder programs
• Changing/clearing password
• Changing backlight OFF time
• Setting input filter
• Setting RS-48ꢀ communications
24
Programmable Relay ZEN V2 Units
■ ZEN Support Software Functions
Note: Always use ZEN-SOFT01-V4 as the Support Software for the V2 CPU Unit.
Creating Ladder Programs
Simulating Ladder Programs
ZEN ladder programs can be created with ease.
The simulation function makes it possible to check whether correct
operation is performed without connecting to the ZEN.
Note: The Edit Input Dialog Box is displayed when an input bit is
inserted. Timer, counter, and other parameter settings are also
set in the Edit Input Dialog Box. They cannot be set in the Edit
Output Dialog Box.
Printing Ladder Programs
Monitoring Ladder Programs
Ladder programs and I/O comments, as well as timer, counter and
other parameter settings can be printed.
The operating status can be monitored from the Support Software by
connecting to the ZEN using a Connecting Cable (ZEN-CIF01).
Note: Both RS-48ꢀ communications and the ZEN monitoring function cannot be used at the same time with Communications-type CPU Units.
The Support Software can also be used
to save files and edit comments.
Refer to the ZEN Support Software Operation Manual (Cat. No. Z184-E1-03) for details.
Programmable Relay ZEN V2 Units
2ꢀ
Dimensions
Note: All units are in millimeters unless otherwise indicated.
■ CPU Units
CPU Units with 10 I/O Points
ZEN-10C@@@-@-V2
Unit Mounting Holes
ꢀ6
44
70
60
4.ꢀ
ꢀ.ꢀ
Note: Use M4 screws
for mounting.
90 80
4ꢀ
Mounting Hole Dimensions
Two, M4
4.7
(Sliding: 13 max.)
80
CPU Units with 20 I/O Points
ZEN-20C@@@-@-V2
ꢀ6
44
122.ꢀ
112.ꢀ
I
6
I
7
I
8
I
9
I
a
I b
60 (112.ꢀ) *
* The dimensions in parentheses
refer to models with 20 I/O points.
20C1AR-A-V2
90 80
4ꢀ
Q4
Qꢀ
Q6
Q7
4.7
(Sliding: 13 max.)
Dimensions with Battery Unit
CPU Units with 10 I/O Points
CPU Units with 20 I/O Points
87.ꢀ
140
17.ꢀ
70
17.ꢀ
122.ꢀ
44
I
6
I
7
I
8
I
9
I
a
I b
20C1AR-A-V2
4ꢀ
4ꢀ
Q4
Qꢀ
Q
6
Q7
26
Programmable Relay ZEN V2 Units
■ Expansion I/O Units
DIN Track Hook
(Using Slide)
ZEN-8E1@@
Mounting Hole Dimensions
ꢀ4
44
7.6
Two, 3.ꢀ dia.
Two, M3
17.ꢀ
2
3ꢀ
90
97
90
97
4ꢀ
2
7.6
■ Power Supply Unit
Mounting Hole Dimensions
ZEN-PA03024
70
60
ꢀ6
44
Two, M4
4ꢀ
90 80
80
60
4.7
(Sliding: 13 max.)
■ Accessories (Order Separately)
Battery Unit
Memory Cassette
Connecting Cable
ZEN-BAT01
ZEN-ME01
ZEN-CIF01
Cable length: 2m
Programmable Relay ZEN V2 Units
27
■ Track Mounting Accessories (Order Separately)
Mounting Track
PFP-100N
PFP-50N
PFP-100N2
16
0.1ꢀ
0.3
7.3
4.ꢀ
4.ꢀ
0.1ꢀ
27
3ꢀ
0.3
3ꢀ
27 24
29.2
1.ꢀ
1ꢀ 2ꢀ
10
2ꢀ
2ꢀ
2ꢀ
1ꢀ (ꢀ) *
1
1ꢀ 2ꢀ
2ꢀ
2ꢀ
2ꢀ 1ꢀ
1
10
10
10
1,000 (ꢀ00) *
* The numbers in parentheses () are dimensions for the PFP-ꢀ0N.
1,000
End Plate
Spacer
16
12
10
ꢀ
6.2
1.8
PFP-M
PFP-S
M4 × 8
pan-head
1
screw
34.8
ꢀ0
3ꢀ.ꢀ 3ꢀ.3
44.3
1.8
11.ꢀ
10
M4 spring washer
1.3
4.8
16.ꢀ
Precautions when Selecting ZEN Programmable Relays
■ Changes in Comparison with Previous Models
• The power supply and transistor output voltage ranges for CPU Units and Expansion I/O Units with DC power supply has been expanded to
10.8 to 28.8 VDC.
• The width of Expansion I/O Units has been reduced by half and only 8-point models are available.
• The connection method between the CPU Unit and Expansion I/O Units has changed.
• Twin timer operation has been added to timers.
• Multiple-day operation and pulse-output operation has been added to weekly timers.
• An 8-digit counter and 8-digit comparators have been added.
• The accuracy of analog inputs has been increased to 1.ꢀ% FS.
• The timing accuracy of weekly timers and calendar timers has been increased to 1ꢀ s or less per month (at 2ꢀ°C).
• Australia and New Zealand Daylight Saving Time (DST) settings have been added.
• CPU Units with RS-48ꢀ communications and economic CPU Units have been added.
• The heat slits in the cases of CPU Units and Expansion I/O Units have been removed to prevent foreign matter from entering.
Model numbers have been changed to reflect the improved functionality.
Previous Model Numbers
ZEN-@C@@@-@
ZEN-@C@@@-@-V1
ZEN-@E@@
(Pre-V1 CPU Units)
(V1 CPU Units)
(4E/8E-type Expansion I/O Units)
New Model Numbers
ZEN-@C@@@-@-V2
ZEN-8E1@@
(V2 CPU Units)
(8E1-type Expansion I/O Unit)
Memory Cassettes, Connecting Cables, and Battery Units have not been changed and can be used as they are with the new models.
28
Programmable Relay ZEN V2 Units
Precautions when Switching from Previous Units
• Previous models of Expansion I/O Units cannot be connected to V2 CPU Units.
• ZEN-8E1@R Expansion I/O Units with relay outputs need to be connected to a power supply.
• A ZEN-@C@D@-D-V2 CPU Unit with DC power supply cannot be connected to an Expansion I/O Unit with AC inputs.
• When connecting Expansion I/O Units with DC inputs to a CPU Unit with an AC power supply, the burst noise immunity will be 1 kV (IEC 61000-
4-4).
• There is no change to the 8 A per contact for relay output, but the total output for all contacts must be as follows:
Units with 10 I/O Points: 20 A max. (1ꢀ A max. for Communications-type CPU Units)
Units with 20 I/O Points: 40 A max.
Expansion I/O Units:
20 A max.
• Always use the ZEN-SOFT01-V4 Support Software for V2 CPU Units.
• Input wiring for CPU Units with DC power supplies differs from that for Pre-V1 CPU Units. Refer to the following diagrams.
V2 and V1 CPU Units
Pre-V1 CPU Units
The input circuit common terminal is connected
internally to the negative (−) side of the power
supply circuit.
COM wiring depends on whether a negative common or positive common is being used.
Positive (+) COM Wiring
Negative (−) COM Wiring
24 VDC
24 VDC
COM wiring required.
24 VDC
COM wiring required.
Analog inputs possible.
Analog inputs possible.
Input
devices
Input
devices
Input
devices
COM
+
−
COM
+
−
NC
+
−
CPU Unit with 10 I/O Points
CPU Unit with 10 I/O Points
CPU Unit with 10 I/O Points
Note: I4 and Iꢀ (Ia and Ib for CPU Units with 20 I/O
points) cannot be used as analog input terminals.
■ Changes
Ratings and Specifications
CPU Units
Item
V2 Units
V1 Units
Pre-V1 Units
Rated power
Models with DC
10.8 to 28.8 VDC
20.4 to 26.4 VDC
supply voltage power supply
Power
Models with AC
See Ratings on page 7.
30 VA max.
(with 3 Expansion I/O Units connected)
consumption power supply
Models with DC
power supply
6.ꢀ W max.
(with 3 Expansion I/O Units connected)
Inrush current Models with AC
power supply
Models with 10 I/O points: 4.ꢀ A max.
Models with 20 I/O points: 4.ꢀ A max.
40 A max.
Models with DC
power supply
Models with 10 I/O points: 30 A max.
Models with 20 I/O points: 30 A max.
20 A max.
DC inputs
I0 to I3
(See note 1.)
Input impedance ꢀ.3 kΩ
ꢀ kΩ
16 VDC min.
4.8 kΩ
ON voltage
8 VDC min.
Input common
Independent common terminal
Internally connected to
power supply terminal
Programmable Relay ZEN V2 Units
29
Item
V2 Units
V1 Units
Pre-V1 Units
DC inputs
I4 to I5
Input impedance ꢀ.2 to ꢀ.ꢀ kΩ
ꢀ kΩ
ON voltage
OFF voltage
8 VDC min.
3 VDC max.
16 VDC min.
ꢀ VDC max.
1ꢀ0 kΩ min.
10% FS (at ambient operating temperature
within rated range)
(See note 2.)
Analog inputs Input impedance 100 kΩ min.
I4 to I5
Accuracy
1.ꢀ% FS (at ambient operating temperature within
rated range)
(See note 2.)
Control
outputs
Relay outputs
8 A per output
8 A per output
Total for all outputs must be as follows:
Units with 10 I/O Points: 20 A max.
(1ꢀ A max. for Communications-type CPU Units)
Units with 20 I/O Points: 40 A max.
Transistor outputs 28.8 V max.
26.4 V max.
Timing accuracy of weekly and
calendar timers
1ꢀ s or less per month (at 2ꢀ°C)
2 min per month
Mounting direction
Standard (vertical) installation and horizontal installation Standard (vertical) installation
Terminal block tightening torque
0.ꢀ6ꢀ to 0.6 N·m (ꢀ to ꢀ.3 in-lb)
0.ꢀ to 0.6 N·m
Connectable Expansion I/O Units ZEN-8E1@ (See note 3.)
Case structure No heat slits
ZEN-4E@ and ZEN-8E@
Heat slits
Note: 1. Units with 20 I/O Points: I0 to I9
2. Units with 20 I/O Points: Ia to Ib
3. Refer to page 32 for details on compatible combinations of CPU Units and Expansion I/O Units.
Expansion I/O Units
Item
8E1 type
4E/8E type
Units with 4 input, 4 output, or 8 I/O points
83 kΩ
Model
Unit with 8 I/O Points
680 kΩ
AC inputs
Input impedance
Isolation
No isolation
Photocoupler
Input common
Input voltage
Input impedance
Isolation
Internally connected to power supply terminal
Independent common terminal
20.4 to 26.4 VDC
DC inputs
10.8 to 28.8 VDC
6.ꢀ kΩ
4.7 kΩ
Photocoupler
ZEN-8E1DR: No isolation
ZEN-8E1DT: Photocoupler
ON voltage
8 VDC min.
16 VDC min.
Input common
ZEN-8E1DR: Internally connected to power supply Independent common terminal
terminal
ZEN-8E1DT: Independent common terminal
Control output Relay outputs
8 A per output
8 A per output
Total for all outputs must be as follows:
Units with 10 I/O Points: 20 A max.
Units with 20 I/O Points: 40 A max.
Transistor outputs 28.8 V max.
26.4 V max.
Mounting screws
M3 (mounting holes on DIN Track hooks)
V2 CPU Units (See note.)
90 × 3ꢀ × ꢀ6 mm
M4 (mounting holes on Unit)
V1 or Pre-V1 CPU Units
90 × 70 × ꢀ6 mm
Heat slits
Connectable CPU Unit
Dimensions (H × W × D)
Case structure
No heat slits
Note: Refer to page 32 for details on compatible combinations of CPU Units and Expansion I/O Units.
30
Programmable Relay ZEN V2 Units
Other Functions
Item
V2 Units
V1 Units
Pre-V1 Units
Bits
Timer operation
ON-delay, OFF-delay, one-shot pulse, flushing
pulse, twin timer operation
ON-delay, OFF-delay, one-shot pulse, flushing
pulse
Weekly timer
operation
Timer operation, multiple-day operation, pulse- Timer operation
output operation
Addition of bits
8-digit counter (1 counter, up to 1ꢀ0 Hz)
8-digit comparators (4 comparators)
---
Daylight Saving Time (DST) Setting Manual, EU, US.
Australia, New Zealand
Manual, EU, US
Items set for password
Ladder program editing
Program all clear
Ladder program editing
Ladder monitoring
Ladder monitoring
Password change/clear
Backlight shut-off time
Input filter settings
Password change/clear
Backlight shut-off time
Input filter settings
Node number setting
Node number setting (See note.)
LCD contrast adjustment
Not possible
Possible
Menus
Node number
setting window
Node number setting window deleted (except for
Units with communications).
Node number setting window displayed.
Modem
initialization
window
Modem initialization window deleted (except for
Units with communications).
Modem initialization window displayed.
RS-485 communications
Models added with communications.
ZEN-10C4@R-@-V2
Economy-type models added.
ZEN-@C3@R-@-V2
Expansion I/O Units cannot be connected.
Other functions are the same as the standard LCD
models.
---
---
Economy-type CPU Units
Note: Not displayed for V2 CPU Units except for Units with Communications.
Bits
Name
CPU Unit
V2 Units
V1 Units
10 I/O points 20 I/O points
6 points 12 points
8 points
Pre-V1 Units
10 I/O points
10 I/O points
6 points
20 I/O points
12 points
Input bits
I
6 points
Output bits
Q
T
4 points (See note.) 8 points
16 points
8 points
4 points
4 points
8 points
4 points
8 points
8 points
8 points
8 points
Timers
Holding timers
Counters
#
C
@
*
16 points
16 points
16 points
16 points
16 points
16 points
12 points
12 points
4 points
Weekly timers
Calendar timers
Display bits
D
M
H
X
Y
A
P
F
Work bits
Holding bits
Expansion input bits
Expansion output bits
Analog comparator bits
Timer/counter comparator bits
8-digit counter
16 points
1 point
---
---
8-digit counter comparator bits
G
4 points
Note: Output bit Q3 of Communications-type CPU Units cannot be output externally. It can be used as a work bit.
Programmable Relay ZEN V2 Units
31
■ Compatible Combinations of CPU Units and Expansion I/O Units
The Expansion I/O Units that can be connected to V2 CPU Units are different from those that can be connected to V1 CPU Units and previous
CPU Units. Expansion I/O Units with AC Inputs cannot be connected to V2 CPU Units with DC Power Supplies. Expansion I/O Units cannot be
connected to Economy-type CPU Units.
CPU Units
Supported
Expansion I/O Units
Version
CPU Unit type
Power supply
Model
V2
Standard LCD type
LED type
Communications type
AC
ZEN-@C1AR-A-V2
ZEN-@C2AR-A-V2
ZEN-10C4AR-A-V2
ZEN-8E1AR
ZEN-8E1DR
ZEN-8E1DT
Standard LCD type
LED type
DC
ZEN-@C1D@-D-V2
ZEN-@C2D@-D-V2
ZEN-8E1DR
ZEN-8E1DT
Economy type
AC
DC
AC
ZEN-@C3AR-A-V2
ZEN-@C3DR-D-V2
Not supported.
V1 and Pre-V1
Standard LCD type
LED type
ZEN-@C1AR-A-V1
ZEN-@C1AR-A
ZEN-4EA
ZEN-4ED
ZEN-4ER
ZEN-8EAR
ZEN-8EDR
ZEN-8EDT
ZEN-@C2AR-A-V1
ZEN-@C2AR-A
DC
ZEN-@C1D@-D-V1
ZEN-@C1D@-D
ZEN-@C2D@-D-V1
ZEN-@C2D@-D
32
Programmable Relay ZEN V2 Units
■ Memory Cassette and CPU Unit Combinations
Be aware of the following restrictions when using a Memory Cassette containing a program that was stored from a CPU Unit with a different version
of system software.
System software version
of CPU Unit used to write
the Memory Cassette
System software version of CPU Unit used to read the Memory Cassette
Ver. 1.1 Ver. 2.0 (V1 CPU Units) Ver. 3.0 (V2 CPU Units)
10 I/O points 20 I/O points 10 I/O points 20 I/O points
Ver. 1.0
Ver. 1.0
Ver. 1.1
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
Restrictions (See note
1.)
Ver. 2.0
(V1 CPU
Units)
10 I/O points Restrictions
Restrictions
OK
OK
OK
OK
OK
OK
OK
OK
(See notes 1 and 2.)
(See note 2.)
20 I/O points Restrictions
Restrictions
Restrictions
(See note 3.)
Restrictions
(See note 3.)
(See notes 1, 2, and 3.) (See notes 2 and 3.)
Ver. 3.0
(V2 CPU
Units)
10 I/O points Restrictions
Restrictions
Restrictions
(See note 4.)
Restrictions
(See note 4.)
OK
(See notes 1, 2, and 4.) (See notes 2 and 4.)
20 I/O points Restrictions
(See notes 1 to 4.)
Restrictions
(See notes 2, 3, and 4.) (See note 4.)
Restrictions
Restrictions
(See note 4.)
Restrictions
(See note 3.)
Note: 1. The display functions (display clear: -CD@ and day/month display: DAT1) cannot be used and will be ignored.
2. Only the memory area ranges supported by the pre-V1 CPU Units can be used for Timers, Holding Timers, Counters, Weekly Timers, Calendar Timers, and
Displays (i.e., only half of each).
3. Only 6 inputs and 4 outputs can be used in the CPU Unit I/O bits. Any others will be ignored.
4. Twin timer operation for timers, multiple-day operation and pulse operation for weekly timers, the 8-digit counter, and 8-digit comparators cannot be used.
New Zealand and Australia cannot be set for Daylight Saving Time (DST).
■ Support Software and CPU Unit Combinations
CPU Unit system software
Support Software
Ver. 1.0
ZEN-SOFT01
Ver. 2.0
ZEN-SOFT01-V2
Ver. 3.0
ZEN-SOFT01-V3
Ver. 4.1
ZEN-SOFT01-V4
Ver. 1.0 (Pre-V1 Units)
OK
OK
OK
Restrictions
Restrictions
(See notes 1 and 2.)
(See notes 1, 2, and 3.)
Ver. 1.1 (Pre-V1 Units)
Ver. 2.0 (V1 CPU Units)
Restrictions
(See note 1.)
Restrictions
(See note 2.)
Restrictions
(See notes 2 and 3.)
10 I/O points Restrictions
Restrictions
(See note 2.)
OK
Restrictions
(See note 3.)
(See notes 1 and 2.)
20 I/O points Not applicable.
Not applicable.
Not applicable.
Not applicable.
OK
Restrictions (See note 3.)
OK
Ver. 3.0 (V2 CPU Units)
Not applicable.
Note: 1. The display functions (display clear: -CD@ and day/month display: DAT1) cannot be used and will be ignored.
2. Only the memory area ranges supported by the pre-V1 CPU Units can be used for Timers, Holding Timers, Counters, Weekly Timers, Calendar Timers, and
Displays (i.e., only half of each).
3. Twin timer operation for timers, multiple-day operation and pulse operation for weekly timers, the 8-digit counter, and 8-digit comparators cannot be used.
New Zealand and Australia cannot be set for Daylight Saving Time (DST).
■ Difference between ZEN Programmable Relays and PLC Ladder
Program Execution
ZEN Programmable Relays
OMRON SYSMAC PLCs
ZEN executes the entire
ladder program (up to 96
lines) from the first to last line
at one time. Each row is
executed in order from left to
right starting from the left bus
bar.
I0
Q0
I3
I1
I2
PLCs execute ladder
I0
Q0
I3
I1
I2
0
[ Q0
0
1
2
3
4
[ Q0
programs one rung (circuit) at
a time, starting with the top
rung and executing it in order
from the left. When the END
instruction is reached, the
program is executed again
from the first rung.
1
2
[ Q1
TT0
[ Q2
[ Q1
TT0
I4
I4
3
4
T0
T0
[ Q2
Executed sequentially
from the bus bar.
END
Bus bar
The ON/OFF status produced by an output contact will not be used
as the input contact status in the same cycle, but it can be used in
the next cycle.
When the following instructions are executed, Q0 turns ON/OFF
at the same time as the other bits.
I0
I0
M0
I0
I0
M0
0
1
[ M0
[ Q0
M0
Q0
0
1
[ M0
[ Q0
M0
Q0
1 cycle
1 cycle
Programmable Relay ZEN V2 Units
33
Precautions
System Startup and Program Changes
!WARNING
• Check the user program for proper execution before actually
Serious human hazard may occasionally occur due to ignition or
rupture of the lithium battery used in the Battery Unit. Do not short the
battery terminals or charge, disassemble, deform under pressure, or
incinerate the battery.
Never use any battery that has been dropped on the floor or otherwise
subjected to excessive shock.
running it on the Unit.
• Disconnect the output lines from the system before testing
operation in any system in which incorrect operation can result in
injury or equipment damage.
• Confirm safety before attempting any of the following operations.
• Changing the operating mode (RUN/STOP).
!CAUTION
• Using the button switches.
Electric shock, fire, or malfunction may occur. Do not disassemble,
modify, or repair the ZEN or touch any of the internal parts.
• Changing bit status or parameter settings.
• Double-check all wiring before turning ON the power supply.
Electric shock may occur. Never touch the I/O terminals, computer
connector, or Battery Unit connector while power is being supplied.
• Refer to “Cycle Time Calculation Method” on page 21 and confirm
that the increase in the cycle time will not affect operation. If the
cycle time is too long, it may become impossible to read input
signals accurately. The increase in the cycle time will be particularly
noticeable when set values are written in RUN mode for a CPU Unit
with communications (ZEN-10C4@R-@-V2).
Electric shock may occur. Do not remove the Expansion Unit
connector cover unless an Expansion I/O Unit will be permanently
installed.
Fire may occasionally occur. Tighten the terminal screws to a torque
of 0.ꢀ6ꢀ to 0.6 N·m (ꢀ to ꢀ.3 in-lb).
Installation and Wiring
• Do not allow the ZEN to fall during installation.
• Be sure that the DIN Track mounting levers, Memory Cassettes,
Battery Units, cable connectors, and other items with locking
devices are properly locked into place. Improper locking may result
in malfunction.
• For surface mounting, tighten mounting screws to the following
torque.
CPU Units: 1.03 N·m max.
Expansion I/O Units: 0.46 N·m max.
• Use wires with cross-sectional areas of 0.2 to 2.ꢀ mm2 (equivalent
to AWG24 to AWG14) for wiring and strip them for 6.ꢀ mm.
■ Precautions for Safe Use
Please observe the following precautions for safe use of this product.
Circuit Design
• All interface connectors and battery connectors are live parts. They
may not be directly connected to a Safety Extra Low Voltage
(SELV) circuit or to accessible conductive parts.
For programming units and personal computers use only the
connecting cable ZEN-CIF01 (optional accessory) manufactured by
OMRON.
ZEN-CIF01 provides safe (reinforced) insulation between personal
computers and ZEN.
Handling
• The environment of use for the ZEN is "Pollution degree 2" and
"Overvoltage category II" specified in IEC60664-1.
• Provide emergency stop circuits, external interlock circuits, limit
circuits, and other safety circuits in addition to any provided within
the ZEN control circuits to ensure safety of the overall system in the
event of ZEN failure or external factors.
• If the ZEN discovers an error during self-diagnosis, operation will
be stopped and all outputs will be turned OFF. As a
• Always use the ZEN within the rated ambient operating
temperature and humidity. The rated ambient operating
temperature is 0 to ꢀꢀ°C (−2ꢀ to ꢀꢀ°C for LED-type CPU Units).
If the ZEN is used near sources of heat, such as a power supply,
the internal temperature of the ZEN may increase, lowering the
durability of the ZEN.
countermeasure for such problems, external safety measures must
be provided to ensure safety in the overall system.
• Discharge static electricity from your body, e.g., by touching a
grounded metal plate, before touching any Unit.
• The exterior of the Units will be damaged if it comes into contact
with organic solvents (e.g., benzene or paint thinner), strong
alkalies, or strong acids. Never allow such substances to come into
contact with the Units.
• Outputs from the ZEN may remain ON or OFF due to faults in
internal circuits such as output relay fusing or burning, or output
transistor destruction. As a countermeasure for such problems,
external safety measures must be provided to ensure safety in the
overall system.
• Fail-safe measures must be taken by the user to ensure overall
system safety in the event of broken signal lines or momentary
power interruptions.
• Do not apply voltages exceeding the rated voltages. Internal
elements may be destroyed.
• The durability of the output relays is largely affected by the
switching conditions. Confirm the operation of the system under
actual operating conditions and set the switching frequency to
ensure that adequate performance will be provided. Insulation
faults and burning in the ZEN may result if relays are used after
their performance has deteriorated.
• Short failures or open failures may result from the destruction of
output elements. Do not use loads that exceed the rated output
current.
Maintenance
When replacing a CPU Unit, transfer to the new Unit and confirm all
settings for clock data, internal holding bits, holding timers, and
counters before starting operation again.
Connecting Expansion I/O Units
• Supply power to both the CPU Unit and Expansion I/O Units from
the same power supply and turn them ON and OFF at the same
time.
• When connecting Expansion I/O Units with DC inputs to a CPU
Unit with an AC power supply, the burst noise immunity will be 1 kV
(IEC 61000-4-4).
Transportation and Storage
• Use special packing boxes when transporting the ZEN and do not
subject it to excessive shock or vibration or drop it during shipment.
• Store the ZEN within the rated ranges. If the ZEN has been stored
at −10°C or lower, allow it to stand at room temperature for
three hours or longer before turning ON the power supply.
• Expansion I/O Units with AC inputs (ZEN-8E1AR) cannot be
connected to a CPU Unit with a DC power supply.
34
Programmable Relay ZEN V2 Units
■ Precautions for Correct Use
Installation Environment
• Do not install the ZEN in the following locations.
• Locations subject to radical changes in temperature
• Locations with high humidity subject to condensation
• Locations subject to excessive dust or dirt
• Locations subject to corrosive gas
• Locations subject to direct sunlight
• Do not install the ZEN in locations subject to shock or vibration.
Extended use in such locations may cause damage from stress.
• In environments subject to static electricity (e.g., close to pipes
conveying forming materials, powders, or fluid materials), separate
the ZEN as far as possible from the source of static electricity.
• The ZEN is neither waterproof nor oil-proof. Do not use it in
locations subject to water or oil.
• Use the ZEN within the allowable power supply voltage range. Be
particularly careful in locations with bad power supply conditions,
e.g., large fluctuations in the power supply voltage.
• Do not install the ZEN in locations subject to excessive noise,
which may cause the ZEN to fail.
• Take appropriate and sufficient countermeasures when installing
systems in the following locations:
• Locations subject to strong electromagnetic fields
• Locations subject to possible exposure to radioactivity
Power Supply
• Always turn OFF the power supply to the ZEN before attempting
any of the following.
• Assembling the ZEN
• Connecting or disconnecting any cables or wiring
• Attaching or removing the Memory Cassette
• Attaching or removing the Battery Unit
• If the power supply is interrupted for two days or more (at 2ꢀ°C),
the internal capacitor will discharge and internal bit status and the
contents of PV areas will be lost or corrupted and dates and times
will be reset. When restarting operation after the power supply has
been interrupted for an extended period of time, check the system
in advance to confirm that no errors will occur.
Handling
• Connect connectors only after confirming that the direction or
polarity is correct.
• Failures could result if dust or dirt enters the ZEN. Always connect
the connector cover to the computer connector whenever it is not
being used.
• Do not remove the label from the left side of the CPU Unit if a
Battery Unit is not mounted.
Other
• The execution of the ladder program in the ZEN is different from
that for other PLCs. Refer to “Difference between ZEN
Programmable Relays and PLC Ladder Program Execution” on
page 33.
• Abide by all local ordinances and regulations when disposing of the
ZEN.
• The Battery Unit (ZEN-BAT01, sold separately) contains a lithium
battery. Observe all applicable legal requirements for your area
when disposing of the lithium battery.
Programmable Relay ZEN V2 Units
3ꢀ
Warranty and Application Considerations
Warranty and Limitations of Liability
WARRANTY
OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year
(or other period if specified) from date of sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT,
MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER
ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET
THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS,
OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON
CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY.
In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE
PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED,
INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE
MODIFICATION OR REPAIR.
Application Considerations
SUITABILITY FOR USE
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of
products in the customer's application or use of the products.
Take all necessary steps to determine the suitability of the product for the systems, machines, and equipment with which it will
be used.
Know and observe all prohibitions of use applicable to this product.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT
ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON
PRODUCTS ARE PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR
SYSTEM.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user’s programming of a programmable product, or any consequence thereof.
Disclaimers
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons. Consult with
your OMRON representative at any time to confirm actual specifications of purchased product.
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.
PERFORMANCE DATA
Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a
warranty. It may represent the result of OMRON’s test conditions, and the users must correlate it to actual application
requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability.
Note: This datasheet is provided as a guideline for selecting products. Do not use this document to operate the Unit.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03ꢀ27.
Cat. No. L106-E1-02
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Automation Company
Control Devices Division H.Q.
Analog Controller Division
Shiokoji Horikawa, Shimogyo-ku,
Kyoto, 600-8ꢀ30 Japan
Printed in Japan
1006-0.3M (0406) (C)
Tel: (81)7ꢀ-344-7080/Fax: (81)7ꢀ-344-7189
相关型号:
©2020 ICPDF网 联系我们和版权申明