74VHCT245AM [ONSEMI]
带 3 态输出的八路缓冲器/线路驱动器;型号: | 74VHCT245AM |
厂家: | ONSEMI |
描述: | 带 3 态输出的八路缓冲器/线路驱动器 驱动 光电二极管 逻辑集成电路 驱动器 |
文件: | 总11页 (文件大小:351K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
May 2007
74VHCT245A
tm
Octal Buffer/Line Driver with 3-STATE Outputs
Features
General Description
■ High Speed: t = 5.4ns (Typ.) at V = 5V
The VHCT245A is an advanced high speed CMOS octal
bus transceiver fabricated with silicon gate CMOS tech-
nology. It achieves high speed operation similar to equiv-
alent Bipolar Schottky TTL while maintaining the CMOS
low power dissipation. The VHCT245A is intended for
bidirectional asynchronous communication between
data busses. The direction of data transmission is deter-
mined by the level of the T/R input. The enable input can
be used to disable the device so that the busses are
effectively isolated.
PD
CC
■ Power Down Protection on Inputs and Outputs
Low Power Dissipation: ICC = 4µA (Max.) @ TA = 25°C
■
■ Pin and Function Compatible with 74HCT245
Protection circuits ensure that 0V to 7V can be applied to
(1)
the input and output pins without regard to the supply
voltage. These circuits prevent device destruction due to
mismatched supply and input/output voltages. This
device can be used to interface 5V to 3V systems and
two supply systems such as battery back up.
Note:
1. Outputs in OFF-State
Ordering Information
Package
Order Number
74VHCT245AM
Number
Package Description
M20B
20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide
20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
74VHCT245ASJ
74VHCT245AMTC
M20D
MTC20
20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm
Wide
Surface mount packages are also available on Tape and Reel. Specify by appending the suffix letter “X” to the
ordering number. Pb-Free package per JEDED J-STD-020B.
©1997 Fairchild Semiconductor Corporation
74VHCT245A Rev. 1.3
www.fairchildsemi.com
Connection Diagram
Logic Symbol
IEEE/IEC
Pin Description
Pin Names
Description
OE
Output Enable Input
Transmit/Receive Input
Truth Table
T/R
Inputs
A –A
Side A Inputs or 3-STATE Outputs
Side B Inputs or 3-STATE Outputs
0
7
OE
L
T/R
L
Outputs
B –B
0
7
Bus B Data to Bus A
Bus A Data to Bus B
HIGH-Z State
L
H
H
X
H = HIGH Voltage Level
L = LOW Voltage Level
X = Immaterial
©1997 Fairchild Semiconductor Corporation
74VHCT245A Rev. 1.3
www.fairchildsemi.com
2
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Symbol
Parameter
Rating
V
Supply Voltage
DC Input Voltage
DC Output Voltage
Note 2
–0.5V to +7.0V
–0.5V to +7.0V
CC
V
IN
V
OUT
–0.5V to V + 0.5V
CC
Note 3
–0.5V to +7.0V
–20mA
I
Input Diode Current
Output Diode Current
DC Output Current
IK
(4)
I
20mA
OK
I
25mA
OUT
I
DC V / GND Current
75mA
CC
CC
T
Storage Temperature
–65°C to +150°C
260°C
STG
T
Lead Temperature (Soldering, 10 seconds)
L
(5)
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to absolute maximum ratings.
Symbol
Parameter
Rating
V
Supply Voltage
Input Voltage
Output Voltage
Note 2
4.5V to +5.5V
0V to +5.5V
CC
V
IN
V
OUT
0V to V
CC
Note 3
0V to +5.5V
–40°C to +85°C
0ns/V ~ 20ns/V
T
Operating Temperature
OPR
t , t
Input Rise and Fall Time, V = 5.0V 0.5V
CC
r
f
Notes:
2. HIGH or LOW state. I
absolute maximum rating must be observed.
OUT
3. When outputs are in OFF-State or when V = 0V.
CC
4. V
< GND, V
> V (Outputs Active).
OUT
OUT CC
5. Unused inputs must be held HIGH or LOW. They may not float.
©1997 Fairchild Semiconductor Corporation
74VHCT245A Rev. 1.3
www.fairchildsemi.com
3
DC Electrical Characteristics
T = –40°C
A
T = 25°C
to +85°C
A
Symbol
Parameter
V
(V)
Conditions
Min. Typ. Max. Min. Max. Units
CC
V
HIGH Level Input
Voltage
4.5
2.0
2.0
2.0
2.0
V
V
V
V
IH
5.5
4.5
5.5
4.5
V
LOW Level Input
Voltage
0.8
0.8
0.8
0.8
IL
V
HIGH Level Output
Voltage
V
or V
= V
I
I
I
I
= –50µA 4.40
4.50
0.0
4.40
3.80
OH
IN
IH
OH
OH
OL
OL
IL
= –8mA
= 50µA
= 8mA
3.94
V
LOW Level Output
Voltage
4.5
5.5
V
= V
0.1
0.1
0.44
2.5
OL
OZ
IN
IH
or V
IL
0.36
0.25
I
3-STATE Output
Off-State Current
V
V
= V or V ,
µA
µA
µA
mA
IN
IH
IL
= V or GND
OUT
CC
I
Input Leakage
Current
0–5.5
5.5
V
V
V
= 5.5V or GND
0.1
4.0
1.0
40.0
1.50
IN
IN
IN
IN
I
Quiescent Supply
Current
= V or GND
CC
CC
I
Maximum I /Input
5.5
= 3.4V, Other
1.35
CCT
CC
Input = V or GND
CC
I
Output Leakage
Current (Power
Down State)
0.0
V
= 5.5V
0.5
5.0
µA
OFF
OUT
Noise Characteristics
T = 25°C
A
Symbol
Parameter
V
(V)
Conditions
Typ.
Limits
Units
CC
(6)
V
Quiet Output Maximum
5.0
C = 50pF
1.2
1.6
V
OLP
L
Dynamic V
OL
(6)
(6)
V
Quiet Output Minimum
Dynamic V
5.0
5.0
5.0
C = 50pF
–1.2
–1.6
2.0
V
V
V
OLV
L
OL
V
V
Minimum HIGH Level
Dynamic Input Voltage
C = 50pF
L
IHD
(6)
Maximum LOW Level
Dynamic Input Voltage
C = 50pF
0.8
ILD
L
Note:
6. Parameter guaranteed by design.
©1997 Fairchild Semiconductor Corporation
74VHCT245A Rev. 1.3
www.fairchildsemi.com
4
AC Electrical Characteristics
T = –40°C
A
T = 25°C
to +85°C
A
Symbol
Parameter
V
(V)
Conditions
Min. Typ. Max. Min. Max. Units
CC
t
, t
Propagation Delay
Time
5.0 0.5
C = 15pF
4.9
5.4
7.7
8.7
1.0
1.0
1.0
1.0
1.0
8.5
9.5
ns
PLH PHL
L
C = 50pF
L
t
t
, t
3-STATE Output
Enable Time
5.0 0.5 R = 1kΩ C = 15pF
9.4
13.8
14.8
15.4
15.0
16.0
16.5
ns
PZL PZH
L
L
C = 50pF
9.9
L
, t
3-STATE Output
Disable Time
5.0 0.5 R = 1kΩ C = 50pF
10.1
ns
ns
PLZ PHZ
L
L
(7)
t
, t
Output to Output
Skew
5.0 0.5
1.0
10
1.0
10
OSLH OSHL
C
Input Capacitance
Output Capacitance
V
V
= Open
= 5.0V
4
pF
pF
pF
IN
CC
C
13
16
OUT
CC
(8)
C
Power Dissipation
Capacitance
PD
Notes:
7. Parameter guaranteed by design. t
= |t
– t
|; t
= |t
– t
|
OSLH
PLH max
PLH min OSHL
PHL max
PHL min
8. C is defined as the value of the internal equivalent capacitance which is calculated from the operating
PD
current consumption without load. Average operating current can be obtained by the equation:
I
(Opr.) = C • V • f + I / 8 (per F/F). The total C when n pcs. of the Octal D Flip-Flop operates
CC
PD CC IN CC PD
can be calculated by the equation: C (total) = 20 + 12n.
PD
©1997 Fairchild Semiconductor Corporation
74VHCT245A Rev. 1.3
www.fairchildsemi.com
5
Physical Dimensions
Dimensions are in millimeters unless otherwise noted.
Figure 1. 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide
Package Number M20B
©1997 Fairchild Semiconductor Corporation
74VHCT245A Rev. 1.3
www.fairchildsemi.com
6
Physical Dimensions (Continued)
Dimensions are in millimeters unless otherwise noted.
Figure 2. 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
Package Number M20D
©1997 Fairchild Semiconductor Corporation
74VHCT245A Rev. 1.3
www.fairchildsemi.com
7
Physical Dimensions (Continued)
Dimensions are in millimeters unless otherwise noted.
Figure 3. 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Package Number MTC20
©1997 Fairchild Semiconductor Corporation
74VHCT245A Rev. 1.3
www.fairchildsemi.com
8
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an
exhaustive list of all such trademarks.
ACEx®
HiSeC™
i-Lo™
Power-SPM™
PowerTrench®
Programmable Active Droop™
QFET®
TinyBuck™
TinyLogic®
TINYOPTO™
TinyPower™
TinyWire™
TruTranslation™
µSerDes™
UHC®
Across the board. Around the world.™
ActiveArray™
Bottomless™
Build it Now™
CoolFET™
CorePLUS™
CROSSVOLT™
CTL™
ImpliedDisconnect™
IntelliMAX™
ISOPLANAR™
MICROCOUPLER™
MicroPak™
MICROWIRE™
Motion-SPM™
MSX™
QS™
QT Optoelectronics™
Quiet Series™
RapidConfigure™
RapidConnect™
ScalarPump™
SMART START™
SPM®
STEALTH™
SuperFET™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SyncFET™
UniFET™
VCX™
Wire™
Current Transfer Logic™
DOME™
MSXPro™
OCX™
E2CMOS™
EcoSPARK®
EnSigna™
OCXPro™
OPTOLOGIC®
OPTOPLANAR®
PACMAN™
PDP-SPM™
POP™
FACT Quiet Series™
FACT®
FAST®
FASTr™
Power220®
Power247®
PowerEdge™
PowerSaver™
TCM™
FPS™
FRFET®
The Power Franchise®
™
GlobalOptoisolator™
GTO™
TinyBoost™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS
HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE
APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS
PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S
WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR
SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems 2. A critical component in any component of a life support,
which, (a) are intended for surgical implant into the body or
(b) support or sustain life, and (c) whose failure to perform
when properly used in accordance with instructions for use
provided in the labeling, can be reasonably expected to
result in a significant injury of the user.
device, or system whose failure to perform can be
reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Definition
Advance Information
Formative or In Design
This datasheet contains the design specifications for product
development. Specifications may change in any manner without notice.
Preliminary
This datasheet contains preliminary data; supplementary data will be
published at a later date. Fairchild Semiconductor reserves the right to
make changes at any time without notice to improve design.
First Production
Full Production
Not In Production
No Identification Needed
Obsolete
This datasheet contains final specifications. Fairchild Semiconductor
reserves the right to make changes at any time without notice to improve
design.
This datasheet contains specifications on a product that has been
discontinued by Fairchild Semiconductor. The datasheet is printed for
reference information only.
Rev. I27
©1997 Fairchild Semiconductor Corporation
74VHCT245A Rev. 1.3
www.fairchildsemi.com
9
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC
www.onsemi.com
相关型号:
74VHCT245AMTCX_NL
Bus Transceiver, AHCT/VHCT Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20, 4.40 MM, MO-153AC, TSSOP-20
FAIRCHILD
74VHCT245AMX_NL
Bus Transceiver, AHCT/VHCT Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20, 0.300 INCH, MS-013, SOIC-20
FAIRCHILD
©2020 ICPDF网 联系我们和版权申明