CAT803SSDI-T10
更新时间:2024-09-18 19:04:53
品牌:ONSEMI
描述:1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3, GREEN, MO-203, SC-70, 3 PIN
CAT803SSDI-T10 概述
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3, GREEN, MO-203, SC-70, 3 PIN 电压监控芯片 电源管理电路
CAT803SSDI-T10 规格参数
是否无铅: | 不含铅 | 是否Rohs认证: | 符合 |
生命周期: | Active | 零件包装代码: | SC-70 |
包装说明: | TSSOP, SOT-323 | 针数: | 3 |
Reach Compliance Code: | compliant | ECCN代码: | EAR99 |
HTS代码: | 8542.39.00.01 | Factory Lead Time: | 16 weeks |
风险等级: | 5.13 | 其他特性: | RESET THRESHOLD VOLTAGE IS 2.93V |
可调阈值: | NO | 模拟集成电路 - 其他类型: | POWER SUPPLY SUPPORT CIRCUIT |
JESD-30 代码: | R-PDSO-G3 | JESD-609代码: | e3 |
长度: | 2 mm | 信道数量: | 1 |
功能数量: | 1 | 端子数量: | 3 |
最高工作温度: | 85 °C | 最低工作温度: | -40 °C |
封装主体材料: | PLASTIC/EPOXY | 封装代码: | TSSOP |
封装等效代码: | SOT-323 | 封装形状: | RECTANGULAR |
封装形式: | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH | 峰值回流温度(摄氏度): | 260 |
电源: | 3.3 V | 认证状态: | Not Qualified |
座面最大高度: | 1.1 mm | 子类别: | Power Management Circuits |
最大供电电流 (Isup): | 0.015 mA | 最大供电电压 (Vsup): | 5.5 V |
最小供电电压 (Vsup): | 1.2 V | 标称供电电压 (Vsup): | 3.3 V |
表面贴装: | YES | 温度等级: | INDUSTRIAL |
端子面层: | MATTE TIN | 端子形式: | GULL WING |
端子节距: | 0.65 mm | 端子位置: | DUAL |
阈值电压标称: | +2.93V | 处于峰值回流温度下的最长时间: | 40 |
宽度: | 1.25 mm | Base Number Matches: | 1 |
CAT803SSDI-T10 数据手册
通过下载CAT803SSDI-T10数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载CAT803, CAT809, CAT810
3-Pin Microprocessor
Power Supply Supervisors
Description
The CAT803, CAT809, and CAT810 are supervisory circuits that
monitor power supplies in digital systems. The CAT803, CAT809, and
CAT810 are direct replacements for the MAX803, MAX809 and
MAX810 in applications operating over the industrial temperature range.
These devices generate a reset signal, which is asserted while the
power supply voltage is below a preset threshold level and for at least
140 ms after the power supply level has risen above that level. The
underlying floating gate technology, Analog EEPROM used by
ON Semiconductor, makes it possible to offer any custom reset
threshold value. Seven industry standard threshold levels are offered
to support +5.0 V, +3.3 V, +3.0 V and +2.5 V systems.
http://onsemi.com
SOT−23
TB SUFFIX
CASE 527AG
The CAT803 has an open−drain RESET output (active LOW). The
CAT803 requires a pull−up resistor on the reset output.
The CAT809 features a push−pull RESET output (active LOW) and
the CAT810 features a push−pull RESET output (active HIGH).
Fast transients on the power supply are ignored and the output is
SC−70
SD SUFFIX
CASE 419AB
guaranteed to be in the correct state at V levels as low as 1.0 V.
CC
The CAT803, CAT809, and CAT810 are available in both the
compact 3−pin SOT−23 and SC−70 packages.
PIN CONFIGURATION
1
3−Lead SOT23
3−Lead SC70
Features
GND
• Precision Monitoring of
+5.0 V (−5%, −10%, −20%),
+3.3 V (−5%, −10%),
+3.0 V (−10%) and
3
V
CC
2
CAT803
CAT809
(CAT810)
RESET
(RESET)
+2.5 V (−5%) Power Supplies
(Top View)
• Offered in Three Output Configurations:
− CAT803: Open−Drain Active LOW Reset
− CAT809: Push−Pull Active LOW Reset
MARKING DIAGRAMS
− CAT810: Push−Pull Active HIGH Reset
• Direct Replacements for the MAX803, MAX809 and MAX810 in
Applications Operating over the Industrial Temperature Range
XXXMG
XXXMG
G
G
• Reset Valid down to V = 1.0 V
CC
• 6 mA Power Supply Current
SOT−23
SC−70
• Power Supply Transient Immunity
XXX
M
G
= Specific Device Code
• Industrial Temperature Range: −40°C to +85°C
• Available in SOT−23 and SC−70 Packages
• These Devices are Pb−Free and are RoHS Compliant
= Month Code
= Pb−Free Package
(*Note: Microdot may be in either location)
Applications
• Computers, Servers, Laptops, Cable Modems
• Wireless Communications
• Embedded Control Systems
• White Goods, Power Meters
• Intelligent Instruments
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 8 of this data sheet.
• PDAs and Handheld Equipment
©
Semiconductor Components Industries, LLC, 2012
1
Publication Order Number:
October, 2012 − Rev. 33
CAT803/D
CAT803, CAT809, CAT810
Table 1. THRESHOLD SUFFIX SELECTOR
Nominal Threshold Voltage
Threshold Suffix Designation
4.63 V
4.55 V
4.38 V
4.00 V
3.08 V
2.93 V
2.63 V
2.32 V
1.60 V
L
H
M
J
T
S
R
Z
V
Table 2. PIN DESCRIPTIONS
Pin Number
CAT803
CAT809
CAT810
Name
Description
1
2
1
2
1
GND
Ground
−
RESET
Active LOW reset. RESET is asserted if V falls below the reset threshold and
remains low for at least 140 ms after V rises above the reset threshold.
CC
CC
−
−
2
3
RESET
Active HIGH reset. RESET is asserted if V falls below the reset threshold and
CC
remains high for at least 140 ms after V rises above the reset threshold.
CC
3
3
V
CC
Power supply voltage that is monitored.
Table 3. ABSOLUTE MAXIMUM RATINGS
Parameter
Rating
−0.3 to +6.0
20
Units
V
Any pin with respect to ground
Input Current, V
mA
CC
Output Current, RESET, RESET
Rate of Rise, V
20
mA
100
V/ms
mW
CC
Continuous Power Dissipation
Derate 2.2 mW/°C above 70°C (SC70)
Derate 4 mW/°C above 70°C (SOT23)
175
320
Operating Temperature Range
Storage Temperature Range
−40 to +85
−65 to +105
300
°C
°C
°C
Lead Soldering Temperature (10 sec)
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
http://onsemi.com
2
CAT803, CAT809, CAT810
V
CC
V
CC
+
–
V
CC
TOLERANCE
RESET
DIGITAL
DELAY
BIAS
VOLTAGE
REFERENCE
CAT803
GND
V
CC
V
CC
+
V
CC
TOLERANCE
DIGITAL
DELAY
BIAS
RESET
–
VOLTAGE
REFERENCE
CAT809
GND
V
CC
V
CC
+
V
CC
TOLERANCE
DIGITAL
DELAY
BIAS
RESET
–
VOLTAGE
REFERENCE
CAT810
GND
Figure 1. Block Diagrams
http://onsemi.com
3
CAT803, CAT809, CAT810
Table 4. ELECTRICAL CHARACTERISTICS
(V = Full range, T = −40°C to +85°C, unless otherwise specified. Typical values at T = +25°C and V = 5 V for the L/H/M/J
CC
A
A
CC
versions, V = 3.3 V for the T/S versions, V = 3 V for the R version and V = 2.5 V for the Z/V versions.)
CC
CC
CC
Typ
(Note 1)
Symbol
Parameter
Range
Conditions
T = 0°C to +70°C
Min
1.0
1.2
Max
5.5
Units
V
CC
V
A
T = −40°C to +85°C
A
5.5
I
Supply Current
T = −40°C
V
V
< 5.5 V, J/L/M/H
8
6
20
mA
CC
A
CC
to +85°C
< 3.6 V, R/S/T/Z/V
15
CC
V
TH
Reset Threshold Voltage
L Threshold
T = +25°C
4.56
4.50
4.48
4.43
4.31
4.25
3.93
3.89
3.04
3.00
2.89
2.85
2.59
2.55
2.28
2.25
1.58
1.56
4.63
4.70
4.75
4.62
4.67
4.45
4.50
4.06
4.10
3.11
3.15
2.96
3.00
2.66
2.70
2.35
2.38
1.62
1.64
V
A
T = −40°C to +85°C
A
H Threshold
M Threshold
J Threshold
T Threshold
S Threshold
R Threshold
Z Threshold
V Threshold
T = +25°C
A
4.55
4.38
4.00
3.08
2.93
2.63
2.32
1.60
T = −40°C to +85°C
A
T = +25°C
A
T = −40°C to +85°C
A
T = +25°C
A
T = −40°C to +85°C
A
T = +25°C
A
T = −40°C to +85°C
A
T = +25°C
A
T = −40°C to +85°C
A
T = +25°C
A
T = −40°C to +85°C
A
T = +25°C
A
T = −40°C to +85°C
A
T = +25°C
A
T = −40°C to +85°C
A
Reset Threshold Tempco
30
20
ppm/°C
ms
T
V
CC
to Reset Delay (Note 2)
V = V to (V − 100 mV)
CC TH TH
D
R
T
Reset Active Timeout Period
T = −40°C to +85°C
140
240
460
0.3
ms
A
V
OL
RESET Output Voltage Low
(Open−drain active LOW,
CAT803 and push−pull,
active LOW, CAT809)
V
= V min, I = 1.2 mA
SINK
V
CC
TH
CAT803R/S/T/Z, CAT809R/S/T/Z/V
V
= V min, I = 3.2 mA
0.4
0.3
CC
TH
SINK
CAT803J/L/M, CAT809J/L/M/H
V
V
> 1.0 V, I
= 50 mA
CC
SINK
V
OH
RESET Output Voltage High
(Push−pull, active LOW,
CAT809)
0.8 V
V
V
V
= V max, I
= 500 mA
CC
TH
SOURCE
CC
CAT809R/S/T/Z/V
V
= V max, I
= 800 mA
V
− 1.5
CC
TH
SOURCE
CC
CAT809J/L/M/H
V
OL
RESET Output Voltage Low
(Push−pull, active HIGH,
CAT810)
V
> V max, I
= 1.2 mA
0.3
0.4
CC
TH
SINK
CAT810R/S/T/Z
V
> V max, I
= 3.2 mA
CC
TH
SINK
CAT810J/L/M
V
OH
RESET Output Voltage High
(Push−pull, active HIGH,
CAT810)
1.8 V < V
SOURCE
V
min,
0.8 V
CC
CC
TH
I
= 150 mA
1. Production testing done at T = +25°C; limits over temperature guaranteed by design only.
A
2. RESET output for the CAT809; RESET output for the CAT810.
http://onsemi.com
4
CAT803, CAT809, CAT810
TYPICAL OPERATING CHARACTERISTICS
(V = Full range, T = −40°C to +85°C, unless otherwise specified. Typical values at T = +25°C and V = 5 V for the
CC
A
A
CC
L/M/J versions, V = 3.3 V for the T/S versions, V = 3 V for the R version and V = 2.5 V for the Z version.)
CC
CC
CC
260
240
220
200
12
10
V
CC
= 5 V
V
CC
= 5.5 V
8
6
4
V
CC
= 3.6 V
V
CC
= 2.5 V
180
160
2
0
−50
0
50
TEMPERATURE (°C)
100
150
−50
0
50
TEMPERATURE (°C)
100
150
Figure 2. Power−up Reset Timeout vs.
Figure 3. Supply Current vs. Temperature
(No Load, CAT8xxR/S/T/Z)
Temperature
14
12
10
8
1.0002
1.0000
0.9998
0.9996
0.9994
0.9992
6
4
0.9990
0.9988
2
0
−50
0
50
100
150
0
20
40
60
80
100
120
TEMPERATURE (°C)
TEMPERATURE (°C)
Figure 4. Power−down Reset Delay vs.
Figure 5. Normalized Reset Threshold vs.
Temperature
Temperature (CAT8xxR/S/T/Z)
http://onsemi.com
5
CAT803, CAT809, CAT810
Detailed Descriptions
Reset Timing
The reset signal is asserted LOW for the CAT803/CAT809 and HIGH for the CAT810 when the power supply voltage falls below
the threshold trip voltage and remains asserted for at least 140 ms after the power supply voltage has risen above the threshold.
5 V
V
TH
V
CC
0 V
T
T
Reset Timeout Period
R
D
(140 ms
minimum)
5 V
RESET
0 V
CAT803, CAT809
5 V
RESET
CAT810
0 V
Figure 6. Reset Timing Diagram
30
VCC Transient Response
T
AMB
= 25°C
The CAT803/CAT809/CAT810 protect mPs against
brownout failure. Short duration transients of 4 msec or less
and 100 mV amplitude typically do not cause a false RESET.
Figure 7 shows the maximum pulse duration of negative−
25
20
15
10
going V transients that do not cause a reset condition.
CC
As the amplitude of the transient goes further below the
CAT809Z
threshold (increasing V − V ), the maximum pulse
TH
CC
duration decreases. In this test, the V starts from an initial
CC
CAT809M
voltage of 0.5 V above the threshold and drops below it by
5
0
the amplitude of the overdrive voltage (V − V ).
TH
CC
1
10
100
1000
RESET OVERDRIVE V − V (mV)
TH
CC
Figure 7. Maximum Transient Duration without
Causing a Reset Pulse vs. Reset Comparator
Overdrive
http://onsemi.com
6
CAT803, CAT809, CAT810
Valid RESET with VCC Under 1.0 V
To ensure that the CAT809 RESET pin is in a known state when V is under 1.0 V, a >10 kW pull−down resistor between
CC
RESET pin and GND is recommended. For the CAT810, a pull−up resistor from RESET pin to V is needed.
CC
Power
Supply
Power
Supply
V
CC
V
CC
10 kW
CAT810
RESET
CAT809
RESET
GND
10 kW
GND
Figure 8. RESET Valid with VCC Under 1.0 V
Figure 9. RESET Valid with VCC Under 1.1 V
Bi−directional Reset Pin Interfacing
The CAT809/810 can interface with mP/mC bi−directional reset pins by connecting a 4.7 kW resistor in series with the
CAT809/810 reset output and the mP/mC bi−directional reset pin.
BUF
Buffered
RESET
Power
Supply
V
CC
V
CC
CAT809
RESET
GND
mP
RESET
INPUT
GND
4.7 kW
(For example:
68HC11)
Bi−directional
I/O Pin
Figure 10. Bi−directional Reset Pin Interfacing
Power
Supply
CAT803 Open−Drain RESET Application
The CAT803 features an open−drain RESET output and
therefore needs a pull−up resistor on the output for proper
operation, as shown on Figure 11. An advantage of the
open−drain output includes the ability to “wire AND”
several outputs together to form an inexpensive logic circuit.
It is also possible to have the pull−up resistor connected to
V
CC
5 kW
V
CC
CAT803
mP
a different supply which can be higher than the CAT803 V
pin. The value of the pull−up resistor is not critical in most
applications, typical values being between 5 kW and 10 kW.
CC
RESET
INPUT
RESET
GND
GND
Figure 11. Typical CAT803 Open−Drain
Circuit Configuration
http://onsemi.com
7
CAT803, CAT809, CAT810
Table 5. ORDERING PART NUMBER
Order Number
Top Mark
(Note 4)
Quantity
per Reel
(Note 5)
NiPdAu (Note 3)
CAT803LSDI−GT3
CAT803MSDI−GT3
CAT803JSDI−GT3
CAT803TSDI−GT3
CAT803SSDI−GT3
CAT803RSDI−GT3
CAT803ZSDI−GT3
CAT803LTBI−GT3
CAT803MTBI−GT3
CAT803JTBI−GT3
CAT803TTBI−GT3
CAT803STBI−GT3
CAT803RTBI−GT3
CAT803ZTBI−GT3
Matte−Tin
NiPdAu
VKA
VKA
VKA
VKA
VKA
VKA
VKA
VKA
VKA
VKA
VKA
VKA
VKA
VKA
Matte−Tin
VKL
VKL
VKL
VKL
VKL
VKL
VKL
VKL
VKL
VKL
VKL
VKL
VKL
VKL
Voltage
4.63 V
4.38 V
4.00 V
3.08 V
2.93 V
2.63 V
2.32 V
4.63 V
4.38 V
4.00 V
3.08 V
2.93 V
2.63 V
2.32 V
Output
Reset
Package
CAT803LSDI−T3
CAT803MSDI−T3
CAT803JSDI−T3
CAT803TSDI−T3
CAT803SSDI−T3
CAT803RSDI−T3
CAT803ZSDI−T3
CAT803LTBI−T3
CAT803MTBI−T3
CAT803JTBI−T3
CAT803TTBI−T3
CAT803STBI−T3
CAT803RTBI−T3
CAT803ZTBI−T3
Open
Drain
LOW
SC70−3
3,000
Open
Drain
LOW
LOW
LOW
SOT−23−3
CAT809LSDI−GT3
CAT809MSDI−GT3
CAT809JSDI−GT3
CAT809TSDI−GT3
CAT809SSDI−GT3
CAT809RSDI−GT3
CAT809ZSDI−GT3
CAT809LTBI−GT3
CAT809HTBI−GT3
CAT809MTBI−GT3
CAT809JTBI−GT3
CAT809TTBI−GT3
CAT809STBI−GT3
CAT809RTBI−GT3
CAT809ZTBI−GT3
CAT809VTBI−GT3
CAT809LSDI−T3
CAT809MSDI−T3
CAT809JSDI−T3
CAT809TSDI−T3
CAT809SSDI−T3
CAT809RSDI−T3
CAT809ZSDI−T3
CAT809LTBI−T3
CAT809HTBI−T3
CAT809MTBI−T3
CAT809JTBI−T3
CAT809TTBI−T3
CAT809STBI−T3
CAT809RTBI−T3
CAT809ZTBI−T3
CAT809VTBI−T3
4.63 V
4.38 V
4.00 V
3.08 V
2.93 V
2.63 V
2.32 V
4.63 V
4.55 V
4.38 V
4.00 V
3.08 V
2.93 V
2.63 V
2.32 V
1.60 V
VLA
VLA
VLA
VLA
VLA
VLA
VLA
VLA
VLA
VLA
VLA
VLA
VLA
VLA
VLA
VLA
VLD
VLD
VLD
VLD
VLD
VLD
VLD
VLD
VLD
VLD
VLD
VLD
VLD
VLD
VLD
VLD
CMOS /
Push−Pull
SC70−3
3,000
CMOS /
Push−Pull
SOT−23−3
3. Not recommended for new designs.
4. Threshold and full part numbers will be provided on box and reel labels as well as all Shipping documents.
5. For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
6. For detailed information and a breakdown of device nomenclature and numbering systems, please see the ON Semiconductor Device
Nomenclature document, TND310/D, available at www.onsemi.com
http://onsemi.com
8
CAT803, CAT809, CAT810
Table 5. ORDERING PART NUMBER
Order Number
Top Mark
(Note 4)
Quantity
per Reel
(Note 5)
NiPdAu (Note 3)
CAT810LSDI−GT3
CAT810MSDI−GT3
CAT810JSDI−GT3
CAT810TSDI−GT3
CAT810SSDI−GT3
CAT810RSDI−GT3
CAT810ZSDI−GT3
CAT810LTBI−GT3
CAT810MTBI−GT3
CAT810JTBI−GT3
CAT810TTBI−GT3
CAT810STBI−GT3
CAT810RTBI−GT3
CAT810ZTBI−GT3
Matte−Tin
NiPdAu
VHA
VHA
VHA
VHA
VHA
VHA
VHA
VHA
VHA
VHA
VHA
VHA
VHA
VHA
Matte−Tin
VHT
VHT
VHT
VHT
VHT
VHT
VHT
VHT
VHT
VHT
VHT
VHT
VHT
VHT
Voltage
4.63 V
4.38 V
4.00 V
3.08 V
2.93 V
2.63 V
2.32 V
4.63 V
4.38 V
4.00 V
3.08 V
2.93 V
2.63 V
2.32 V
Output
Reset
Package
CAT810LSDI−T3
CAT810MSDI−T3
CAT810JSDI−T3
CAT810TSDI−T3
CAT810SSDI−T3
CAT810RSDI−T3
CAT810ZSDI−T3
CAT810LTBI−T3
CAT810MTBI−T3
CAT810JTBI−T3
CAT810TTBI−T3
CAT810STBI−T3
CAT810RTBI−T3
CAT810ZTBI−T3
CMOS /
HIGH
SC70−3
Push−Pull
3,000
CMOS /
Push−Pull
HIGH
SOT−23−3
3. Not recommended for new designs.
4. Threshold and full part numbers will be provided on box and reel labels as well as all Shipping documents.
5. For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
6. For detailed information and a breakdown of device nomenclature and numbering systems, please see the ON Semiconductor Device
Nomenclature document, TND310/D, available at www.onsemi.com
http://onsemi.com
9
CAT803, CAT809, CAT810
PACKAGE DIMENSIONS
SOT−23, 3 Lead
CASE 527AG−01
ISSUE O
SYMBOL
MIN
NOM
MAX
D
A
A1
b
0.89
0.013
0.37
1.12
0.10
0.50
0.18
3.04
2.64
1.40
3
c
0.085
2.80
D
E1
E
E
E1
e
2.10
1.20
0.95 BSC
1.90 BSC
0.40 REF
1
2
e1
L
e
e1
L1
0.54 REF
0º
8º
θ
TOP VIEW
A
q
b
L1
L
c
A1
SIDE VIEW
END VIEW
Notes:
(1) All dimensions are in millimeters. Angles in degrees.
(2) Complies with JEDEC TO-236.
http://onsemi.com
10
CAT803, CAT809, CAT810
PACKAGE DIMENSIONS
SC−70, 3 Lead, 1.25x2
CASE 419AB−01
ISSUE O
SYMBOL
MIN
NOM
MAX
D
0.80
A
1.10
A1
A2
0.00
0.80
0.10
1.00
0.90
b
c
0.15
0.08
1.80
1.80
1.15
0.30
0.22
2.20
2.40
1.35
E1
E
D
E
2.00
2.10
E1
e
1.25
0.65 BSC
0.36
L
0.26
0.46
e
e
L1
L2
0.42 REF
0.15 BSC
TOP VIEW
0º
4º
8º
θ
10º
θ1
q1
A2
A1
A
q
L
b
L1
q1
c
L2
SIDE VIEW
END VIEW
Notes:
(1) All dimensions are in millimeters. Angles in degrees.
(2) Complies with JEDEC MO-203.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
For additional information, please contact your local
Sales Representative
CAT803/D
CAT803SSDI-T10 替代型号
型号 | 制造商 | 描述 | 替代类型 | 文档 |
CAT803SSDI-GT3 | ONSEMI | 3-Pin Microprocessor Power Supply Supervisors | 功能相似 | |
CAT803SSDI-T3 | ONSEMI | 3-Pin Microprocessor Power Supply Supervisors | 功能相似 |
CAT803SSDI-T10 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
CAT803SSDI-T3 | ONSEMI | 3-Pin Microprocessor Power Supply Supervisors | 获取价格 | |
CAT803SSDIGT3 | ONSEMI | 3-Pin Microprocessor Power Supply Supervisors | 获取价格 | |
CAT803SSDIT10 | CATALYST | 3-Pin Microprocessor Power Supply Supervisors | 获取价格 | |
CAT803SSDIT3 | CATALYST | 3-Pin Microprocessor Power Supply Supervisors | 获取价格 | |
CAT803SSDIT3 | ONSEMI | 3-Pin Microprocessor Power Supply Supervisors | 获取价格 | |
CAT803STBI | ONSEMI | 3-Pin Microprocessor Power Supply Supervisors | 获取价格 | |
CAT803STBI-G | CATALYST | 暂无描述 | 获取价格 | |
CAT803STBI-G | ONSEMI | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3, GREEN, TO-236, SOT-23, 3PIN | 获取价格 | |
CAT803STBI-GT10 | CATALYST | 3-Pin Microprocessor Power Supply Supervisors | 获取价格 | |
CAT803STBI-GT3 | CATALYST | 3-Pin Microprocessor Power Supply Supervisors | 获取价格 |
CAT803SSDI-T10 相关文章
- 2024-09-20
- 6
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6