CAT809TTBI-G [ONSEMI]
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3, GREEN, TO-236, SOT-23, 3PIN;
| 型号： | CAT809TTBI-G |
| 厂家： | 
ONSEMI |
| 描述： | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3, GREEN, TO-236, SOT-23, 3PIN 微处理器 监控 |
| 文件： | 总14页 (文件大小：529K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
CAT803, CAT809, CAT810
3-Pin Microprocessor Power Supply Supervisors
FꢀATꢁꢂꢀS
DESCRIPTIOꢀ
The CAT803, CAT809, and CAT8ꢀ0 are supervisory
circuitsthatmonitorpowersuppliesindigitalsystems.The
CAT803, CAT809, and CAT8ꢀ0 are direct replacements
for the MAX803, MAX809 and MAX8ꢀ0 in applications
operating over the industrial temperature range.
■ Precision monitoring of
+5.0V (-5%, -10%, -20%),
+3.3V (-5%, -10%),
+3.0V (-10%) and
+2.5V (-5%) power supplies
Thesedevicesgeneratearesetsignal,whichisasserted
whilethepowersupplyvoltageisbelowapresetthreshold
level and for at least ꢀ40 ms after the power supply level
has risen above that level. The underlying floating gate
technology, AE2(TM) used by Catalyst Semiconductor,
makes it possible to offer any custom reset threshold
value. Seven industry standard threshold levels are
offered to support +5.0V, +3.3V, +3.0V and +2.5V
systems.
■ Offered in three output configurations:
- CAT803: Open-Drain Active LOW reset
- CAT809: Push-Pull Active LOW reset
- CAT810: Push-Pull Active HIGH reset
■ Direct replacements for the MAX803, MAX809
and MAX810 in applications operating over the
industrial temperature range
■ ꢂeset valid down to VCC = 1.0V
■ 6µA power supply current
The CAT803 has an open-drain RESET output (active
LOW). The CAT803 requires a pull-up resistor on the
reset output.
■ Power supply transient immunity
■ Industrial temperature range: -40ºC to +85ºC
The CAT809 features a push-pull RESET output (active
LOW) and the CAT8ꢀ0 features a push-pull RESET
output (active HIGH).
■ Available in RoHS-compliant SOT-23 and SC-70
packages
Fast transients on the power supply are ignored and
the output is guaranteed to be in the correct state at Vcc
levels as low as ꢀ.0V.
APPLICATIOꢀS
■ Computers
■ Servers
TheCAT803,CAT809,andCAT8ꢀ0areavailableinboth
the compact 3-pin SOT-23 and SC-70 packages.
■ Laptops
■ Cable modems
■ Wireless communications
■ ꢀmbedded control systems
■ White goods
ꢁor Ordering Information details, see page 11 & 12.
■ Power meters
■ Intelligent instruments
THRESHOLD SꢂꢁꢁIX SELECTOR
■ PDAs and handheld equipment
ꢀominal Threshold Threshold Suffix
Voltage
4.63V
4.38V
4.00V
3.08V
2.93V
2.63V
2.32V
Designation
PIꢀ COꢀꢁIGꢂRATIOꢀ
L
M
J
3-Lead SOT23
3-Lead SC70
GND
1
2
T
S
R
Z
(CAT803)
CAT809
(CAT810)
3
V
CC
RESET
(RESET)
© 20ꢀ0 SCILLC. All rights reserved.
Characteristics subject to change without notice
Doc. No. MD-3004, Rev. AA
ꢀ
CAT803, CAT809, CAT810
PIꢀ DESCRIPTIOꢀS
Pin ꢀumber
ꢀame Description
GND Ground
CAT803 CAT809 CAT810
ꢀ
2
ꢀ
2
ꢀ
—
RESET Active LOW reset. RESET is asserted if VCC falls below the reset thresh-
old and remains low for at least ꢀ40ms after VCC rises above the reset
threshold.
—
3
—
3
2
3
RESET Active HIGH reset. RESET is asserted if VCC falls below the reset thresh-
old and remains high for at least ꢀ40ms after VCC rises above the reset
threshold.
VCC
Power supply voltage that is monitored.
BLOCK DIAGRAMS
V
CC
V
CC
TOLERANCE
BIAS
+
–
RESET
V
CC
DIGITAL
DELAY
VOLTAGE
REFERENCE
CAT803
GND
V
CC
V
CC
TOLERANCE
BIAS
+
–
V
CC
DIGITAL
DELAY
RESET
VOLTAGE
REFERENCE
CAT809
GND
V
CC
V
CC
TOLERANCE
BIAS
+
–
V
CC
DIGITAL
DELAY
RESET
VOLTAGE
REFERENCE
CAT810
GND
Doc. No. MD-3004, Rev. AA
© 20ꢀ0 SCILLC. All rights reserved.
Characteristics subject to change without notice
2
CAT803, CAT809, CAT810
ABSOLꢂTE MAXIMꢂM RATIꢀGS(1)
Any pin with respect to ground
Input Current, VCC
-0.3V to +6.0V
20mA
Output Current, RESET, RESET
Rate of Rise, VCC
20mA
ꢀ00V/µs
Continuous Power Dissipation
Derate 2.2mW/ºC above 70ºC (SC70) ꢀ75 mW
Derate 4mW/ºC above 70ºC (SOT23) 320 mW
Operating Temperature Range
Storage Temperature Range
Lead Soldering Temperature (ꢀ0 sec)
ꢀote:
-40ºC to +85ºC
-65ºC to +ꢀ05ºC
300ºC
(ꢀ) Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only,
and functional operation of the device at these or any other conditions outside of those listed in the operational sections of this specification
is not implied. Exposure to any absolute maximum rating for extended periods may affect device performance and reliability.
ELECTRICAL CHARACTERISTICS
VCC = Full range, TA = -40ºC to +85ºC unless otherwise noted. Typical values at TA = +25ºC and VCC = 5V for the
L/M/J versions, VCC = 3.3V for the T/S versions, VCC = 3V for the R version and VCC = 2.5V for the Z version.
Parameter
Symbol Conditions
TA = 0ºC to +70ºC
Min
ꢀ.0
ꢀ.2
Typ
Max
5.5
ꢁnits
VCC Range
V
TA = -40ºC to +85ºC
5.5
Supply Current
ICC
VCC < 5.5V, J/L/M
VCC < 3.6V, R/S/T/Z
TA = +25ºC
8
6
20
µA
V
TA = -40ºC to +85ºC
ꢀ5
Reset
Threshold
Voltage
VTH
4.56
4.50
4.3ꢀ
4.25
3.93
3.89
3.04
3.00
2.89
2.85
2.59
2.55
2.28
2.25
4.63
4.70
4.75
4.45
4.50
4.06
4.ꢀ0
3.ꢀꢀ
3.ꢀ5
2.96
3.00
2.66
2.70
2.35
2.38
L Threshold
M Threshold
J Threshold
T Threshold
S Threshold
R Threshold
Z Threshold
TA = -40ºC to +85ºC
TA = +25ºC
4.38
4.00
3.08
2.93
2.63
2.32
TA = -40ºC to +85ºC
TA = +25ºC
TA = -40ºC to +85ºC
TA = +25ºC
TA = -40ºC to +85ºC
TA = +25ºC
TA = -40ºC to +85ºC
TA = +25ºC
TA = -40ºC to +85ºC
TA = +25ºC
TA = -40ºC to +85ºC
© 20ꢀ0 SCILLC. All rights reserved.
Characteristics subject to change without notice
Doc. No. MD-3004, Rev. AA
3
CAT803, CAT809, CAT810
(continued)
ELECTRICAL CHARACTERISTICS
VCC = Full range, TA = -40ºC to +85ºC unless otherwise noted. Typical values at TA = +25ºC and VCC = 5V for
L/M/J versions, VCC = 3.3V for T/S versions, VCC = 3V for R version and VCC = 2.5V for Z version.
Parameter
Symbol Conditions
Min
Typ(1) Max ꢁnits
Reset Threshold Tempco
VCC to Reset Delay (Note 2)
Reset Active Timeout Period
RESET Output Voltage Low
30
20
ppm/ºC
µs
TD
TR
VCC = VTH to (VTH - ꢀ00 mV)
TA = -40ºC to +85ºC
ꢀ40
240
460
0.3
ms
VCC = VTH min, ISINK = ꢀ.2mA
CAT803R/S/T/Z, CAT809R/S/T/Z
(Open-drain active LOW,
CAT803 and push-pull,
active LOW, CAT809)
VOL
VCC = VTH min, ISINK = 3.2mA
CAT803J/L/M, CAT809J/L/M
0.4
0.3
V
V
VCC > ꢀ.0V, ISINK = 50µA
RESET Output Voltage High
VCC = VTH max, ISOURCE = 500µA
CAT809R/S/T/Z
0.8 VCC
(Push-pull, active LOW,
CAT809)
VOH
VCC = VTH max, ISOURCE = 800µA
CAT809J/L/M
VCC - ꢀ.5
RESET Output Voltage Low
VCC > VTH max, ISINK = ꢀ.2mA
CAT8ꢀ0R/S/T/Z
0.3
0.4
(Push-pull, active HIGH,
CAT8ꢀ0)
VOL
V
V
VCC > VTH max, ISINK = 3.2mA
CAT8ꢀ0J/L/M
RESET Output Voltage High
0.8 VCC
ꢀ.8V < VCC VTH min,
ISOURCE = ꢀ50µA
VOH
(Push-pull active HIGH,
CAT8ꢀ0)
ꢀotes:
(ꢀ) Production testing done at TA = +25ºC; limits over temperature guaranteed by design only.
(2) RESET output for the CAT809; RESET output for the CAT8ꢀ0.
Doc. No. MD-3004, Rev. AA
© 20ꢀ0 SCILLC. All rights reserved.
Characteristics subject to change without notice
4
CAT803, CAT809, CAT810
TyPICAL OPERATIꢀG CHARACTERISTICS
VCC = Full range, TA = -40ºC to +85ºC unless otherwise noted. Typical values at TA = +25ºC and VCC = 5V for
L/M/J versions, VCC=3.3V for T/S versions, VCC = 3V for R version and VCC = 2.5V for Z version.
POWER-UP RESET TIMEOUT
VS. TEMPERATURE
SUPPLY CURRENT VS. TEMPERATURE
(NO LOAD, CAT8xxR/S/T/Z)
260
240
220
200
180
160
12
10
8
V
=5.5V
V
V
=5V
CC
CC
=3.6V
6
CC
4
V
=2.5V
100
CC
2
0
-50
0
50
150
-50
0
50
100
150
TEMPERATURE (˚C)
TEMPERATURE (˚C)
POWER-DOWN RESET DELAY VS. TEMPERATURE
(CAT8xxR/S/T/Z)
NORMALIZED RESET THRESHOLD
VS. TEMPERATURE
1.0002
1
14
12
10
8
0.9998
0.9996
0.9994
0.9992
0.999
0.9988
6
4
2
0
-50
0
50
100
150
0
20
40
60
80
100 120
TEMPERATURE (˚C)
TEMPERATURE (˚C)
© 20ꢀ0 SCILLC. All rights reserved.
Characteristics subject to change without notice
Doc. No. MD-3004, Rev. AA
5
CAT803, CAT809, CAT810
DETAILED DESCRIPTIOꢀS
RESET TIMIꢀG
The reset signal is asserted LOW for the CAT803/
CAT809 and HIGH for the CAT8ꢀ0 when the power
supply voltage falls below the threshold trip voltage and
remains asserted for at least ꢀ40ms after the power
supply voltage has risen above the threshold.
5V
V
TH
V
CC
0V
T
D
T
Reset Timeout Period
CAT803, CAT809
R
(140ms
minimum)
5V
RESET/OUT
0V
5V
RESET
CAT810
0V
ꢁigure 1. Reset Timing Diagram
VCC TRAꢀSIEꢀT RESPOꢀSE
The CAT803/CAT809/CAT8ꢀ0 protect µPs against
brownout failure. Short duration transients of 4µsec
or less and ꢀ00mV amplitude typically do not cause a
false RESET.
As the amplitude of the transient goes further below
the threshold (increasing VTH - VCC), the maximum
pulse duration decreases. In this test, the VCC starts
from an initial voltage of 0.5V above the threshold and
drops below it by the amplitude of the overdrive voltage
(VTH - VCC).
Figure2showsthemaximumpulsedurationofnegative-
going VCC transients that do not cause a reset condition.
ꢁigure 2. Maximum Transient Duration Without Causing a Reset Pulse vs. Reset Comparator Overdrive
Doc. No. MD-3004, Rev. AA
© 20ꢀ0 SCILLC. All rights reserved.
Characteristics subject to change without notice
6
CAT803, CAT809, CAT810
VALID RESET WITH VCC ꢂꢀDER 1.0V
To ensure that the CAT809 RESET pin is in a known
statewhenVCC isunder1.0V,a>10kΩpull-downresistor
between RESET pin and GND is recommended. For
the CAT8ꢀ0, a pull-up resistor from RESET pin to VCC
is needed.
Power
Supply
Power
Supply
V
V
CC
CC
10kΩ
CAT810
RESET
CAT809
RESET
GND
10kΩ
GND
Figure 3. ꢂꢀSꢀT Valid with VCC ꢁnder 1.0V
ꢁigure 4. RESET Valid with VCC ꢁnder 1.1V
BI-DIRECTIOꢀAL RESET PIꢀ IꢀTERꢁACIꢀG
The CAT809/8ꢀ0 can interface with µP/µC bi-directional
reset pins by connecting a 4.7kΩ resistor in series with
theCAT809/8ꢀ0resetoutputandtheµP/µCbi-directional
reset pin.
BUF
Buffered
RESET
Power
Supply
V
CC
V
CC
CAT809
RESET
GND
µP
(For example:
68HC11)
RESET
INPUT
GND
Bi-directional
I/O Pin
ꢁigure 5. Bi-directional Reset Pin Interfacing
© 20ꢀ0 SCILLC. All rights reserved.
Characteristics subject to change without notice
Doc. No. MD-3004, Rev. AA
7
CAT803, CAT809, CAT810
CAT803 OPEꢀ-DRAIꢀ ꢂꢀSꢀT APPLICATIOꢀ
The CAT803 features an open-drain RESET output
and therefore needs a pull-up resistor on the output for
proper operation, as shown on Figure 6. An advantage
of the open-drain output includes the ability to “wire
AND” several outputs together to form an inexpensive
logiccircuit. Itisalsopossibletohavethepull-upresistor
connectedtoadifferentsupplywhichcanbehigherthan
the CAT803 VCC pin. The value of the pull-up resistor
is not critical in most applications, typical values being
between 5kΩ and 10kΩ.
Power
Supply
V
CC
5kΩ
V
CC
CAT803
RESET
GND
µP
RESET
INPUT
GND
ꢁigure 6. Tꢃpical CAT803 Open-Drain Circuit Configuration
Doc. No. MD-3004, Rev. AA
© 20ꢀ0 SCILLC. All rights reserved.
Characteristics subject to change without notice
8
CAT803, CAT809, CAT810
PACKAGE OꢂTLIꢀE DRAWIꢀGS
SOT-23 3-Lead (TB)
SYMBOL
MIN
0.89
0.013
0.37
0.085
2.80
2.10
1.20
NOM
MAX
1.12
0.10
0.50
0.18
3.04
2.64
1.40
D
A
A1
b
3
c
D
E1
E
E
E1
e
0.95 BSC
1.90 BSC
0.400 REF
0.540 REF
1
2
e1
L
e
e1
L1
θ
0º
8º
TOP VIEW
A
θ
b
L1
L
c
A1
SIDE VIEW
END VIEW
ꢀotes:
(ꢀ) All dimensions are in millimeters. Angles in degrees.
(2) Complies with JEDEC standard TO-236.
© 20ꢀ0 SCILLC. All rights reserved.
Characteristics subject to change without notice
Doc. No. MD-3004, Rev. AA
9
CAT803, CAT809, CAT810
SC-70 3-Lead (SD)
SYMBOL
MIN
NOM
MAX
1.10
0.10
1.00
0.30
0.22
2.20
2.40
1.35
D
A
A1
A2
b
0.80
0.00
0.80
0.15
0.08
1.80
1.80
1.15
0.90
c
D
2.00
2.10
E1
E
E
E1
e
1.25
0.65 BSC
0.36
L
0.26
0.46
e
e
L1
L2
θ
0.42 REF
0.15 BSC
TOP VIEW
0°
4°
8°
θ1
10°
θ1
A2
A1
A
θ
L
L1
b
θ1
c
L2
SIDE VIEW
END VIEW
ꢀotes:
(ꢀ) All dimensions are in millimeters. Angles in degrees.
(2) Complies with JEDEC standard MO-203.
Doc. No. MD-3004, Rev. AA
© 20ꢀ0 SCILLC. All rights reserved.
Characteristics subject to change without notice
ꢀ0
CAT803, CAT809, CAT810
EXAMPLE Oꢁ ORDERIꢀG IꢀꢁORMATIOꢀ(2) (3) (4)
Prefix
Device #
809
Suffix
CAT
S
TBI
–
G
T3
Package Type(1)
Company ID
Device Type
803: Open-Drain / Active Low Output
809: Push-Pull / Active Low Output
810: Push-Pull / Active High Output
Trip Level
L: 4.63V
M: 4.38V
J: 4.00V
T: 3.08V
S: 2.93V
R: 2.63V
Z: 2.32V
T: Tape & Reel
3: 3000/Reel
TBI: SOT-23 Green
SDI: SC70 Green
Lead Finish
G: NiPdAu
ꢀotes:
(ꢀ) All packages are RoHS-compliant (Lead-free, Halogen-free).
(2) The standard lead finish is NiPdAu. Contact factory for other lead finishes.
(3) The device used in the example above is a CAT809STBI-GT3 (Push-Pull / Active Low Output, trip level of 2.85V to 3.00V NiPdAu, Tape and
Reel, 3,000/Reel).
(4) For additional package and temperature options, please contact your nearest ON Semiconductor Sales office.
TOP MARKIꢀG
SOT-23 RoHS
ꢀiPdAu
SC70 RoHS
ꢀiPdAu
Device(1)
CAT803x
CAT809x
CAT8ꢀ0x
Finish(2)(3)
Finish(2)(3)
RNYM
NRYM
NSYM
RN__
NR__
NS__
ꢀotes:
(ꢀ) All theshold trip level options have the same marking.
(2) The “YM” in the SOT-23 package marking indicates the Year and Month of production and the “_” in the SC70 package marking indicates
the assembly location.
(3) All NiPdAu devices will be marked to indicate product type and package. Threshold and full part numbers will be provided on box and reel
labels as well as all Shipping documents.
© 20ꢀ0 SCILLC. All rights reserved.
Characteristics subject to change without notice
Doc. No. MD-3004, Rev. AA
ꢀꢀ
CAT803, CAT809, CAT810
ORDERIꢀG PART ꢀꢂMBER
Order ꢀumber
Voltage
Output
ꢂeset
Package
Quantity per ꢂeel
CAT803LSDI-GT3
CAT803MSDI-GT3
CAT803JSDI-GT3
CAT803TSDI-GT3
CAT803SSDI-GT3
CAT803RSDI-GT3
CAT803ZSDI-GT3
4.63V
4.38V
4.00V
3.08V
2.93V
2.63V
2.32V
Open Drain
LOW
CAT809LSDI-GT3
CAT809MSDI-GT3
CAT809JSDI-GT3
CAT809TSDI-GT3
CAT809SSDI-GT3
CAT809RSDI-GT3
CAT809ZSDI-GT3
4.63V
4.38V
4.00V
3.08V
2.93V
2.63V
2.32V
CMOS / Push-
Pull
LOW
HIGH
LOW
LOW
HIGH
SC70-3
3,000
CAT8ꢀ0LSDI-GT3
CAT8ꢀ0MSDI-GT3
CAT8ꢀ0JSDI-GT3
CAT8ꢀ0TSDI-GT3
CAT8ꢀ0SSDI-GT3
CAT8ꢀ0RSDI-GT3
CAT8ꢀ0ZSDI-GT3
4.63V
4.38V
4.00V
3.08V
2.93V
2.63V
2.32V
CMOS / Push-
Pull
CAT803LTBI-GT3
CAT803MTBI-GT3
CAT803JTBI-GT3
CAT803TTBI-GT3
CAT803STBI-GT3
CAT803RTBI-GT3
CAT803ZTBI-GT3
4.63V
4.38V
4.00V
3.08V
2.93V
2.63V
2.32V
Open Drain
CAT809LTBI-GT3
CAT809MTBI-GT3
CAT809JTBI-GT3
CAT809TTBI-GT3
CAT809STBI-GT3
CAT809RTBI-GT3
CAT809ZTBI-GT3
4.63V
4.38V
4.00V
3.08V
2.93V
2.63V
2.32V
CMOS / Push-
Pull
SOT-23-3
3,000
CAT8ꢀ0LTBI-GT3
CAT8ꢀ0MTBI-GT3
CAT8ꢀ0JTBI-GT3
CAT8ꢀ0TTBI-GT3
CAT8ꢀ0STBI-GT3
CAT8ꢀ0RTBI-GT3
CAT8ꢀ0ZTBI-GT3
4.63V
4.38V
4.00V
3.08V
2.93V
2.63V
2.32V
CMOS / Push-
Pull
Doc. No. MD-3004, Rev. AA
© 20ꢀ0 SCILLC. All rights reserved.
Characteristics subject to change without notice
ꢀ2
CAT803, CAT809, CAT810
REVISIOꢀ HISTORy
Date
ꢂev. Description
29-Oct-03
30-Oct-03
3-Oct-04
N
O
P
Updated VCC Transient Response text and Figure 2
Updated Power Up Reset Timeout vs. Temperature curve
Corrected temperature range
Updated Description
Updated Ordering Information
Updated Absolute Maximum Ratings
Updated Electrical Characteristics
23-Mar-04
25-Mar-04
Q
Updated Description
Updated Ordering Information
Updated Absolute Maximum Ratings
Updated Electrical Characteristics
Updated Typical Operating Characteristics
Updated Package Information
R
Changed Preliminary designation to Final
Updated Max Reset Active Timeout Period in Electrical Characteristics
Updated package drawings
5-Oct-04
S
T
Updated top marking table
28-Feb-05
Updated Features
Updated Ordering Information
Updated Top Marking
ꢀ7-Feb-06
ꢀ0-Aug-06
Q
U
Updated Typical Operating Characteristics
Updated Features
Updated Description
Updated Max Reset Active Timeout Period in Electrical Characteristics
Updated Figure ꢀ
Updated Package Information
Correct Revision Number
ꢀ7-Oct-06
ꢀ2-Feb-07
V
Updated Top Marking
Updated Detailed Description
Adding CAT803
W
Updated Electrical Characteristics
Updated Figure ꢀ
Updated Ordering Information
20-Mar-07
3ꢀ-Jan-08
X
Y
Updated Detailed Descriptions
Added MD- to Document Number
Added Block Diagrams
Updated Package Outline Drawings
Updated Example of Ordering Information
Updated Ordering Part Number
05-Nov-08
ꢀ8-Mar-ꢀ0
Z
Change logo and fine print to ON Semiconductor
AA
Updated Example of Ordering Information
Updated Ordering Part Number
© 20ꢀ0 SCILLC. All rights reserved.
Characteristics subject to change without notice
Doc. No. MD-3004, Rev. AA
ꢀ3
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any
products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out
of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters
which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including
“Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC
products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or
for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any
such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs,
damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even
if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all
applicable copyright laws and is not for resale in any manner.
PꢂBLICATIOꢀ ORDERIꢀG IꢀꢁORMATIOꢀ
LITERATꢂRE ꢁꢂLꢁILLMEꢀT:
Literature Distribution Center for Oꢀ Semiconductor
P.O. Box 5ꢀ63, Denver, Colorado 802ꢀ7 USA
ꢀ. American Technical Support: 800-282-9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 42ꢀ 33 790 29ꢀ0
Japan Customer ꢁocus Center:
Phone: 8ꢀ-3-5773-3850
Oꢀ Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
Phone: 303-675-2ꢀ75 or 800-344-3860 Toll Free USA/Canada
ꢁax: 303-675-2ꢀ76 or 800-344-3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
For additional information, please contact your local
Sales Representative
相关型号：
CAT809TTBI-T10
Power Supply Support Circuit, Fixed, 1 Channel, +3.08VV, PDSO3, GREEN, TO-236, SOT-23, 3 PIN
CATALYST
©2020 ICPDF网 联系我们和版权申明