EGP10G [ONSEMI]
1.0A快速恢复整流器;型号: | EGP10G |
厂家: | ONSEMI |
描述: | 1.0A快速恢复整流器 局域网 二极管 |
文件: | 总5页 (文件大小:148K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DATA SHEET
www.onsemi.com
Rectifier, High Efficiency,
Glass Passivated, 1.0ꢀA
EGP10B - EGP10K
AXIAL LEAD / DO−41
Features
CASE 017AH
Superfast Recovery Time for High Efficiency
Low Forward Voltage, High Current Capability
Low Leakage Current
MARKING DIAGRAM
High Surge Current Capability
EGP10X
ZYWW
ABSOLUTE MAXIMUM RATINGS (T = 25C unless otherwise noted)
A
Symbol
Parameter
Value
Unit
EGP10X
= Specific Device Code
X = B/C/D/F/G/K
= Assembly Code
I
Average Rectified Current
1.0
A
O
0.375” lead length @ T = 75_C
L
Z
I
Peak Forward Surge Current
30
A
f(surge)
YWW
= Date Code (Year & Week)
8.3 ms single half−sine−wave
Superimposed on rated load
(JEDEC method)
ORDERING INFORMATION
See detailed ordering and shipping information on page 3
of this data sheet.
P
Total Device Dissipation
2.5
17
W
mWC
D
Derate above 25_C
I
C
Thermal Resistance, Junction to Ambient
50
C/W
C
TJ, TSTG Junction and Storage Temperature Range −65~150
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
*These ratings are limiting values above which the serviceability of any
semiconductor device may be impaired.
ELECTRICAL CHARACTERISTICS (T = 25C unless otherwise noted)
A
Device
10B
100
70
10C
150
105
150
10D
200
140
200
10F
300
210
300
10G
400
280
400
10K
800
560
800
Parameter
Peak Repetitive Reverse Voltage
Maximum RMS Voltage
Unit
V
V
DC Reverse Voltage (Rated V )
100
V
R
Maximum Reverse
5.0
T = 25_C
A
mA
mA
A
Current at Rated V
R
T = 125_C
100
Maximum Reverse Recovery Time
I = 0.5 A, I = 1.0 A, I = 0.25 A
50
75
nS
V
F
R
rr
Maximum Forward Voltage @ 2.0 A
Typical Junction Capacitance
0.95
22
1.25
1.7
15
pF
V
R
= 4.0 V, f = 1.0 MHz
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
*Pulse Test: Pulse Width 300 ms, Duty Cycle 2%.
Semiconductor Components Industries, LLC, 2007
1
Publication Order Number:
October, 2022 − Rev. 2
EGP10K/D
EGP10B − EGP10K
TYPICAL PERFORMANCE CHARACTERISTICS
30
1
0.75
0.50
0.25
0
25
20
Single Phase
Half Wave
60 Hz
Resistive or
Inductive LOAD
.375” (9.0 mm) LEAD
Lengths
15
10
5
0
25
50
75
100
125
150
175
1
2
5
10
20
50
100
Ambient Temperature (5C)
Number of Cycles at 60 Hz
Figure 1. Forward Current Derating Curve
Figure 2. Non−Repetitive Surge Current
50
10
1000
100
T = 150C
A
EGP10B−EGP10D
T = 125C
A
10
1
T = 25C
A
1
T = 100C
A
EGP10F−EGP10K
0.1
0.1
0.01
Pulse Width = 30 ms
2% Duty Cycle
T = 25C
A
0.01
0
20
40
60
80
100
120
140
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
Percent of Rated Peak Reverse Voltage (%)
Figure 4. Reverse Characteristics
Forward Voltage (V)
Figure 3. Forward Characteristics
60
50
40
30
20
10
0
EGP10B−EGP10D
EGP10F−EGP10K
0.1
1
10
100
1000
Reverse Voltage (V)
Figure 5. Junction Capacitance
www.onsemi.com
2
EGP10B − EGP10K
Reverse Recovery Time Characteristic and Test Circuit Diagram
t
rr
50 W
50 W
Non−inductive
Non−inductive
+0.5 A
(−)
DUT
0
Pulse
+
50 V
(approx.)
Generator
(Note 2)
−0.25 A
−
50 W
Non−inductive
Oscilloscope
(Note 1)
(+)
Notes:
−1 A
1. Rise time = 7.0 ns max; Input impedance = 1.0 MW 22 pF.
2. Rise time = 10 ns max; Source impedance = 50 W.
1 cm
Set Time Base for
5/10 ns/cm
Figure 6. Test Circuit Diagram
Figure 7. Reverse Recovery Time
Characteristics
ORDERING INFORMATION
†
Device
EGP10B
EGP10C
EGP10D
EGP10F
EGP10G
EGP10K
Package
Shipping
Axial Lead / DO−41
(Pb−Free)
5000 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
www.onsemi.com
3
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
AXIAL LEAD / DO−41
CASE 017AH
ISSUE O
DATE 31 AUG 2016
25.40 MIN (2X)
5.20
4.06
0.86
0.71
NOTES: UNLESS OTHERWISE SPECIFIED
A) PACKAGE STANDARD REFERENCE:
JEDEC DO−204 VARIATION AL.
B) PACKAGE BODY CAN BE PLASTIC OR
HERMETICALLY SEALED GLASS.
C) ALL DIMENSIONS ARE IN MILLIMETERS.
2.72
2.03
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
DOCUMENT NUMBER:
DESCRIPTION:
98AON13444G
AXIAL LEAD / DO−41
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
ADDITIONAL INFORMATION
TECHNICAL PUBLICATIONS:
Technical Library: www.onsemi.com/design/resources/technical−documentation
onsemi Website: www.onsemi.com
ONLINE SUPPORT: www.onsemi.com/support
For additional information, please contact your local Sales Representative at
www.onsemi.com/support/sales
相关型号:
EGP10G-AP
Rectifier Diode, 1 Element, 1A, 400V V(RRM), Silicon, DO-41, ROHS COMPLIANT, PLASTIC PACKAGE-2
MCC
EGP10G-BP
Rectifier Diode, 1 Element, 1A, 400V V(RRM), Silicon, DO-41, ROHS COMPLIANT, PLASTIC PACKAGE-2
MCC
EGP10G-HE3
DIODE 1 A, 400 V, SILICON, SIGNAL DIODE, DO-204AL, LEAD FREE, PLASTIC, DO-41, 2 PIN, Signal Diode
VISHAY
EGP10G-HE3/54
DIODE 1 A, 400 V, SILICON, SIGNAL DIODE, DO-204AL, ROHS COMPLIANT, PLASTIC, DO-41, 2 PIN, Signal Diode
VISHAY
EGP10G-HE3/73
DIODE 1 A, 400 V, SILICON, SIGNAL DIODE, DO-204AL, ROHS COMPLIANT, PLASTIC, DO-41, 2 PIN, Signal Diode
VISHAY
©2020 ICPDF网 联系我们和版权申明