FAN4931IP5X [ONSEMI]
运算放大器,低功耗,轨对轨 I/O,超低成本,CMOS 运算放大器;型号: | FAN4931IP5X |
厂家: | ONSEMI |
描述: | 运算放大器,低功耗,轨对轨 I/O,超低成本,CMOS 运算放大器 放大器 光电二极管 运算放大器 |
文件: | 总13页 (文件大小:1174K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
February 2013
FAN4931
Ultra-Low Cost, Rail-to-Rail I/O, CMOS Amplifier
Features
Description
.
.
.
.
.
.
.
200 µA Supply Current per Amplifier
FAN4931 is an ultra-low cost voltage feedback amplifier
with CMOS inputs that consumes only 200 µA of supply
current, while providing ±33 mA of output short-circuit
current. This amplifier is designed to operate from 2.5 V
to 5 V supplies. The common-mode voltage range
extends beyond the negative and positive rails.
3.7 MHz Bandwidth
Output Swing to within 10 mV of Either Rail
Input Voltage Range Exceeds the Rails
3 V/µs Slew Rate
The FAN4931 is designed on a CMOS process and
provides 3.7 MHz of bandwidth and 3 V / μs of slew rate
at a supply voltage of 5 V. This amplifier operates and is
reliable over a wide temperature range -40°C to
+125°C. The combination of extended temperature
operation, low power, rail-to-rail performance, low
voltage operation,and tiny package optimizes this
amplifier for use in many industrial, general purpose and
battery powered applications.
25 nV/√Hz Input Voltage Noise
FAN4931 Competes with LMV931; Available in
SC70-5 Package
.
Fully Specified at +2.7 V and +5 V Supplies
Applications
.
.
.
.
.
.
.
.
.
.
Motor Control
Portable / Battery-Powered Applications
PCMCIA, USB
Mobile Communications, Cellular Phones, Pagers
Notebooks and PDAs
Sensor Interface
A/D Buffer
Active Filters
Signal Conditioning
Portable Test Instruments
Figure 1. Frequency vs. Gain
Ordering Information
Part Number
Operating Temperature Range
Package
Packing Method
-40 to +125°C
FAN4931IP5X
5-Lead SC70 Package
Tape and Reel (3000)
© 2008 Fairchild Semiconductor Corporation
FAN4931 • Rev. 1.0.2
www.fairchildsemi.com
Typical Application
Figure 2. Typical Application
Pin Configurations
Figure 3. Pin Assignments
Pin Assignments
Pin #
Name
+IN
Description
Positive Input
Negative Supply
Negative Input
Output
1
2
3
4
5
-VS
-IN
VOUT
+VS
Positive Supply
© 2008 Fairchild Semiconductor Corporation
FAN4931 • Rev. 1.0.2
www.fairchildsemi.com
2
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable
above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition,
extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute
maximum ratings are stress ratings only. Functional operation under any of these conditions is NOT implied.
Performance and reliability are guaranteed only if operating conditions are not exceeded.
Symbol
VCC
VIN
Parameter
Min.
0
Max.
6
Unit
V
Supply Voltage
Input Voltage Range
Junction Temperature
Storage Temperature
-VS-0.5
+VS+0.5
+150
+150
+300
331
V
TJ
°C
TSTG
TL
-65
°C
Lead Soldering, 10 Seconds
Thermal Resistance(1)
°C
°C/W
ΘJA
Human Body Model,
JESD22-A114
5
2
ESD
Electrostatic Discharge Capability
kV
Charged Device Model,
JESD22-C101
Note:
Package thermal resistance JEDEC standard, multi-layer test boards, still air.
1.
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to Absolute Maximum Ratings.
Symbol
Parameter
Min.
2.30
-40
Max.
5.25
Unit
V
+VS
Supply Voltage
Operating Temperature Range
TA
+125
°C
© 2008 Fairchild Semiconductor Corporation
FAN4931 • Rev. 1.0.2
www.fairchildsemi.com
3
Electrical Specifications at +2.7V
VS=+2.7 V, G=2, RL=10 kΩ to VS/2, RF=5 kΩ; unless otherwise noted.
Symbol
Parameter
Conditions
Min.
Typ.
Max.
Units
Frequency Domain Response
UGBW
G=+1
4.0
2.5
4
MHz
MHz
MHz
-3dB Bandwidth
BWSS
GBWP
Gain Bandwidth Product
Time Domain Response
tR, fF
OS
Rise and Fall Time
VO=1.0 V Step
300
5
ns
%
Overshoot
Slew Rate
VO=1.0 V Step
SR
VO=3 V Step, G=-1
3
V/µs
Distortion and Noise Response
HD2
2nd Harmonic Distortion
VO=1 VPP, 10 kHz
VO=1 VPP, 10 kHz
VO=1 VPP, 10 kHz
-66
-67
0.1
26
dBc
dBc
HD3
3rd Harmonic Distortion
Total Harmonic Distortion
Input Voltage Noise
THD
%
en
nV/√Hz
DC Performance
VIO
dVIO
Ibn
Input Offset Voltage(2)
-6
0
2.1
5
+6
mV
µV/°C
pA
Average Drift
Input Bias Current
PSRR
AOL
IS
Power Supply Rejection Ratio(2)
DC
DC
50
73
98
200
dB
Open-Loop Gain
Supply Current per Amplifier(2)
dB
300
µA
Input Characteristics
RIN
CIN
Input Resistance
10
GΩ
Input Capacitance
1.4
pF
Input Common Mode Voltage
Range
-0.3 to
2.8
CMIR
V
CMRR
Common Mode Rejection Ratio(2)
DC, VCM=OV to 2.2 V
50
65
dB
Output Characteristics
0.01 to
2.69
0.03
2.65
RL=10 kΩ to VS/2
RL=1 kΩ to VS/2
VO
Output Voltage Swing(2)
V
0.05 to
2.55
ISC
VS
Short-Circuit Output Current
+34/-12
mA
V
2.5 to
5.5
Power Supply Operating Range
Note:
2. 100% tested at TA=25°C.
© 2008 Fairchild Semiconductor Corporation
FAN4931 • Rev. 1.0.2
www.fairchildsemi.com
4
Electrical Specifications at +5V
VS=+5 V, G=2, RL=10 kΩ to VS/2, RF= 5 kΩ; unless otherwise noted.
Symbol
Parameter
Conditions
Min.
Typ.
Max.
Units
Frequency Domain Response
UGBW
G=+1
3.7
2.3
3.7
MHz
MHz
MHz
-3dB Bandwidth
BWSS
GBWP
Gain Bandwidth Product
Time Domain Response
tR, fF
OS
Rise and Fall Time
VO=1.0 V Step
300
5
ns
%
Overshoot
Slew Rate
VO=1.0 V Step
SR
VO=3 V Step, G=-1
3
V/µs
Distortion and Noise Response
HD2
2nd Harmonic Distortion
VO=1 VPP, 10 kHz
VO=1 VPP, 10 kHz
VO=1 VPP, 10 kHz
-80
-80
0.02
25
dBc
dBc
HD3
3rd Harmonic Distortion
Total Harmonic Distortion
Input Voltage Noise
THD
%
en
nV/√Hz
DC Performance
VIO
dVIO
Ibn
Input Offset Voltage(3)
-8
0
+8
mV
µV/°C
pA
Average Drift
2.9
5
Input Bias Current
PSRR
AOL
IS
Power Supply Rejection Ratio(3)
DC
DC
50
73
dB
Open-Loop Gain
Supply Current per Amplifier(3)
102
200
dB
300
µA
Input Characteristics
RIN
CIN
Input Resistance
10
GΩ
Input Capacitance
1.2
pF
Input Common Mode Voltage
Range
-0.3 to
5.1
CMIR
Typical
V
CMRR
Common Mode Rejection Ratio(3)
DC, VCM=0 V to VS
58
73
dB
Output Characteristics
0.01 to
4.99
0.03
4.95
RL=10 kΩ to VS/2
RL=1 kΩ to VS/2
VO
Output Voltage Swing(3)
V
0.1 to
4.9
ISC
VS
Short-Circuit Output Current
±33
mA
V
2.5 to
5.5
Power Supply Operating Range
Note:
3. 100% tested at TA=25°C.
© 2008 Fairchild Semiconductor Corporation
FAN4931 • Rev. 1.0.2
www.fairchildsemi.com
5
Typical Performance Characteristics
VS=+2.7, G=2, RL=10 kΩ to VS/2, RF=5 kΩ; unless otherwise noted.
Figure 4. Non-Inverting Frequency Response (+5)
Figure 6. Non-Inverting Frequency Response
Figure 8. Frequency Response vs. CL
Figure 5. Inverting Frequency Response (+5 V)
Figure 7. Inverting Frequency Response
Figure 9. Frequency Response vs. RL
Figure 10. Large Signal Frequency Response (+5 V)
Figure 11. Open-Loop Gain and Phase vs. Frequency
© 2008 Fairchild Semiconductor Corporation
FAN4931 • Rev. 1.0.2
www.fairchildsemi.com
6
Typical Performance Characteristic
VS=+2.7, G=2, RL=10 kΩ to VS/2, RF=5 kΩ; unless otherwise noted.
Figure 12. 2nd and 3rd Harmonic Distortion
Figure 14. 3rd Harmonic Distortion vs. VO
Figure 16. PSRR VS=5 V
Figure 13. 2nd Harmonic Distortion vs. VO
Figure 15. CMRR VS=5 V
Figure 17. Output Swing vs. Load
Figure 18. Pulse Response vs. Common-Mode
Voltage
Figure 19. Input Voltage Noise
© 2008 Fairchild Semiconductor Corporation
www.fairchildsemi.com
FAN4931 • Rev. 1.0.2
7
Application Information
General Description
Overdrive Recovery
The FAN4931 amplifier is a single-supply, general-
purpose, voltage-feedback amplifier, fabricated on a bi-
CMOS process. It features a rail-to-rail input and output
and is unity gain stable. The typical non-inverting circuit
schematic is shown in Figure 20.
Overdrive of an amplifier occurs when the output and/or
input ranges are exceeded. The recovery time varies
based on whether the input or output is overdriven and
by how much the range is exceeded. The FAN4931
typically recovers in less than 500 ns from an overdrive
condition. Figure 22 shows the FAN4931 amplifier in an
overdriven condition.
Figure 22. Overdrive Recovery
Figure 20. Typical Non-Inverting Configuration
Driving Capacitive Loads
Input Common-Mode Voltage
Figure 8 illustrates the response of the amplifier. A small
series resistance (RS) at the output, illustrated in Figure
23, improves stability and settling performance. RS values
in Figure 8 were chosen to achieve maximum bandwidth
with less than 2 dB of peaking. For maximum flatness,
use a larger RS. Capacitive loads larger than 500 pF
require the use of RS.
The common-mode input range extends to 300 mV below
ground and to 100 mV above VS in single-supply
operation. Exceeding these values does not cause phase
reversal; however, if the input voltage exceeds the rails
by more than 0.5 V, the input ESD devices begin to
conduct. The output stays at the rail during this overdrive
condition. If the absolute maximum input VIN (700 mV
beyond either rail) is exceeded, externally limit the input
current to ±5 mA, as shown in Figure 21.
Figure 23. Typical Topology for Driving a
Capacitive Load
Figure 21. Circuit for Input Current Protection
Power Dissipation
Driving a capacitive load introduces phase-lag into the
output signal, which reduces phase margin in the
amplifier. The unity gain follower is the most sensitive
configuration. In a unity gain follower configuration, the
amplifier requires a 300 Ω−series resistor to drive a
100 pF load.
The maximum internal power dissipation allowed is
directly related to the maximum junction temperature. If
the maximum junction temperature exceeds 150°C,
performance degradation occurs. If the maximum junction
temperature exceeds 150°C for an extended time, device
failure may occur.
© 2008 Fairchild Semiconductor Corporation
FAN4931 • Rev. 1.0.2
www.fairchildsemi.com
8
Layout Considerations
General layout and supply bypassing play major roles in
high-frequency performance. Fairchild evaluation boards
help guide high-frequency layout and aid in device testing
and characterization. Follow the steps below as a basis
for high-frequency layout:
Evaluation Board Information
The following evaluation board is available to aid in the
testing and layout of this device.
Evaluation
Description
Products
Include 6.8 μF and 0.01 μF ceramic capacitors.
Board
Place the 6.8 μF capacitor within 0.75 inches of the
power pin.
Single-Channel,
Dual-Supply,
FAN4931-011
FAN4931IP5X
5 -Lead SC70
Place the 0.01 μF capacitor within 0.1 inches of the
power pin.
Evaluation board schematics are shown in Figure 24;
layouts are shown in Figure 25-Figure 26.
Remove the ground plane under and around the part,
especially near the input and output pins, to reduce
parasitic capacitance.
Minimize all trace lengths to reduce series inductances.
Refer to the evaluation board layouts shown in Figure 24-
Figure 26 for more information.
When evaluating only one channel, complete the
following on the unused channel:
Ground the non-inverting input.
Short the output to the inverting input.
Figure 24. Evaluation Board Schematic
Board Layout Information
Figure 25. Top Side
Figure 26. Bottom Side
© 2008 Fairchild Semiconductor Corporation
FAN4931 • Rev. 1.0.2
www.fairchildsemi.com
9
Physical Dimensions
Figure 27. 5-Lead SC70 Package
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in
any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor
representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s
worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/.
© 2008 Fairchild Semiconductor Corporation
FAN4931 • Rev. 1.0.2
www.fairchildsemi.com
10
© 2008 Fairchild Semiconductor Corporation
FAN4931 • Rev. 1.0.2
www.fairchildsemi.com
11
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC
www.onsemi.com
相关型号:
©2020 ICPDF网 联系我们和版权申明