FAN5646S700X_技术文档

ON Semiconductor

Is Now

To learn more about onsemi™, please visit our website at

www.onsemi.com

onsemi andꢀꢀꢀꢀꢀꢀꢀand other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or

subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi

product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without

notice. The information herein is provided “as-is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality,

or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all

liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws,

regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/

or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application

by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized

for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for

implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and holdonsemi and its officers, employees,

subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death

associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative

Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others.

Is Now Part of

To learn more about ON Semiconductor, please visit our website at

www.onsemi.com

Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers

will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor

product management systems do not have the ability to manage part nomenclature that utilizes an underscore

(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain

device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated

device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please

email any questions regarding the system integration to Fairchild_questions@onsemi.com.

ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number

of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right

to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability

arising out of the application or use of any product or circuit, and speciﬁcally disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON

Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON

Semiconductor data sheets and/or speciﬁcations can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s

technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA

Class 3 medical devices or medical devices with a same or similar classiﬁcation in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended

or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its ofﬁcers, employees, subsidiaries, afﬁliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out

of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor

is an Equal Opportunity/Afﬁrmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

May 2013

FAN5646

Programmable Indicator ―Soft‖ LED Blinker with TinyWire™

Single-Wire Interface

Features

Description

The FAN5646 is a flexible and compact solution for a blinking

or “breathing” LED indicator. The internal programmable blink

algorithm eliminates any need for continual system processor

control. This means longer battery life for a hand-held system

because the system processor is not awakened from sleep

mode to blink an LED.

.

LED “Soft” Blink: with Logarithmic Fade Up and Fade

Down for Power Savings

Follow or Repeat Pattern Mode for Blinking when

Applications Processor is Powered Down

Default Pattern Optionally Modified using TinyWire™

Single-Wire Digital Control for:

Very low dropout of 80 mV allows driving an LED without any

inductors or switch capacitors. LED blink rate, rise and fall

time, and CTRL line behavior can be programmed by a

TinyWire™ single-wire digital interface. The on-time and time

between pulses can be set for up to two different pulse widths.

–

LED Current Rise / Fall Time

t_ONand t_OFFfor Up to Two Pulses

.

High-Side Constant Current LED Driver:

–

20 mA Maximum Output Current

80 mV Drop-out at 20 mA I_OUT

The default for FAN5646 option 01 is “follow” mode, where the

LED turns on with the programmed rise time, then stays on as

long as CTRL remains HIGH. When CTRL falls, the LED turns

off at the programmed fall time. For option 00; when CTRL is

HIGH continuously, the LED repeats the programmed pattern.

External R_SET(SC70 only) or Internal Current

Programming

.

35 A Operating Quiescent Current

The FAN5646 is available in a four-pin wafer-level chip-scale

package with 0.4 mm pitch or a five-lead SC70 package.

Short-Circuit, Under-Voltage, and Thermal Protections

Wide Input Range: 2.7 to 5.5 V

VIN

LED+

4-Bump WLCSP, 0.4 mm pitch or

5-Lead SC70 (EIAJ SC88)

2.7 to 5.5V

0.1

1

2

3

5

GND

ISET

Applications

CTRL

4

.

Cell Phone

Pocket PCs and Digital Cameras

Bluetooth^®Headsets PMP and MP3 players

R=24.3kW

Figure 1. Typical Application

Ordering Information

Part Number

FAN5646UC00X

FAN5646S700X*

FAN5646UC01X*

FAN5646S701X*

Option Follow Bit Default Temperature Range

Package

Packing

00

01

0

1

-40 to 85°C

WLCSP-4, 0.4mm Pitch Tape and Reel

5-Lead SC70, EIAJ SC88 Tape and Reel

WLCSP-4, 0.4mm Pitch Tape and Reel

5-Lead SC70, EIAJ SC88 Tape and Reel

* This device is End of Life. Please contact sales for additional information and assistance with replacement devices.

Bluetooth® is a registered trademark of Bluetooth SIG, Inc.

Important: Contact a Fairchild Semiconductor sales representative for additional performance information and specifications.

www.fairchildsemi.com

FAN5646 • Rev. 1.0.3

Pin Configuration

VIN

LED+

CTRL

LED+

CTRL

VIN

A1

B1

A2

B2

A2

B2

A1

B1

GND

Figure 2. WLCSP – Top View: Bumps Facing Down

Figure 3. WLCSP – Bottom View: Bumps Facing Up

1

2

3

5

4

VIN

GND

ISET

LED+

CTRL

Figure 4. SC70-5 Top View

Pin Definitions

Pin #

Name Description

WLCSP

A1

SC70-5

1

5

2

4

VIN

LED+ LED Anode. LED current source output.

GND

Ground.

Input Voltage. Connect to 2.7-5.5 V_DCinput power source.

A2

B1

B2

CTRL Control pin. Logic input that controls programming and starts IC playback.

LED Current Setting. Full-scale LED current is set by tying this pin through a

ISET

3

resistor (R_SET) to GND. If this pin is left open, an internal current reference is used.

www.fairchildsemi.com

FAN5646 • Rev. 1.0.3

2

Absolute Maximum Ratings

Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above

the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended

exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings

are stress ratings only.

Symbol

Parameter

Min. Max. Units

V_IN, LED+, CTRL Voltage

ISET Voltage

-0.3

6.0

V

V_CC

V_IN

+

-0.3

V

0.3

Human Body Model per JESD22-A114

Charged Device Model per JESD22-C101

8.0

2.0

ESD

Electrostatic Discharge Protection Level

kV

T_J

T_STG

T_L

Junction Temperature

–40

–65

+150

+260

°C

Storage Temperature

Lead Soldering Temperature, 10 Seconds

Recommended Operating Conditions

The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating

conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding

them or designing to absolute maximum ratings.

Symbol

V_IN

Parameter

Min. Max. Units

Power Supply Voltage Range

2.7

-40

5

5.5

+85

+125

20

V

T_A

Operating Ambient Temperature Range

Operating Junction Temperature Range

Full-Scale LED Current

°C

mA

T_J

I_LED(FS)

If I_SETis OPEN

CONTROL[7:6] = 00

I_LED= 7.2 mA to 2.5 mA

17.4

20.5

21.5

24.3

48.7

34.8

30.1

28.7

CONTROL[7:6] = 01

I_LED= 12.1 mA to 7.1 mA

R_SET

R_SETValues for +10% I_SETAccuracy⁽¹⁾

kΩ

CONTROL[7:6] = 10

I_LED= 17.3 mA to 12.3 mA

CONTROL[7:6] = 11

I_LED= 20.4 mA to 17.3 mA

Note:

1. Applicable for SC70 version only.

www.fairchildsemi.com

FAN5646 • Rev. 1.0.3

3

Electrical Specifications

V_IN= 2.7 V to 5.5 V, T_A= -40°C to +85°C, V_f= 1.8 V to [ 3.5 V or V_IN– 0.1 V ], whichever is smaller. Typical values are at

T_A= 25°C, V_IN= 3.6 V, and V_f= 2.5 V.

Symbol

Parameter

Conditions

Min.

Typ.

Max.

Units

Power Supplies

I_SD

I_IN

I_ACTIVE

V_IH

IDLE Mode Supply Current

Quiescent Current

V_IN= 3.6 V, CTRL = 0 V

V_IN= 3.6 V, I_LED= 0 mA

V_IN= 3.6 V, LED+ = ON

0.30

35

0.75

80

µA

V

Active Mode Supply Current⁽²⁾

Logic Input Voltage HIGH

Logic Input Voltage LOW

Control Pin Input Current

220

1.1

V_IL

0.4

V

I_IH

CTRL = 1.8 V

V_INRising

1

250

nA

V

2.5

2.2

Under-Voltage Lockout

Threshold

V_UVLO

V_INFalling

V

Regulation

CONTROL[7:6] = 00

CONTROL[7:6] = 01

CONTROL[7:6] = 10

CONTROL[7:6] = 11

CONTROL[7:6] = 00

CONTROL[7:6] = 01

CONTROL[7:6] = 10

CONTROL[7:6] = 11

12.1 kΩ ≤ R_SET≤ 100 kΩ

V_IN= 3.6 V, ΔV_IN= 700 mV,

4.25

8.70

5.00

10.00

15.00

20.00

5.00

5.75

11.30

16.80

22.00

5.30

I_SETOPEN

13.20

18.00

4.70

LED Output

Current

I_LED

mA

9.40

10.00

15.00

20.00

1.23

10.60

15.90

21.20

R_SET= 24.3kW

14.10

18.80

V_ISET

I_SETDrive Voltage

V

I_{OUT_RIPPLE}

Maximum LED Ripple Current⁽²⁾I_LED= 20 mA, t_rise= t_fall= 10 µs,

t_LOW= 280 µs

0.5

% p-p

∆I_{OUT_LOAD}

∆I_{OUT_LINE}

V_DROPOUT

I_OUTLoad Regulation

I_OUTLine Regulation

Dropout Voltage

LED V_f= 1.8 to 3.45 V, V_IN= 3.6 V

V_IN= 2.7 to 4.8 V, V_f= 2.5 V

I_LED= 20 mA, -10% I_LEDDrop

Rising Temperature at Junction

Hysteresis

-3

+3

%

80

150

20

mV

TSD

Thermal Shutdown

°C

Timing

f_OSC

Internal Oscillator Frequency

V_IN= 3.6 V

61

77

93

kHz

%

Oscillator Stability Over

Temperature⁽²⁾

T_OSC

3

Note:

2. These parameters are guaranteed by design and characterization.

www.fairchildsemi.com

FAN5646 • Rev. 1.0.3

4

Typical Characteristics

300

280

260

240

220

200

180

160

140

120

100

90

80

70

60

50

40

25°C

85°C

-40°C

V_F= 3.3V

I_OUT= 15mA

30

20

10

0

3.00

2.50

3.00

3.50

4.00

4.50

5.00

5.50

3.50

4.00

4.50

5.00

5.50

V_IN[V]

V

IN

[V]

Figure 6. Active Mode Supply Current (LED+ = ON)

Figure 5. Efficiency at 25C

60

25

50

40

30

20

10

0

20

85°C

25°C

15

-40°C

10

85°C

5

0

0.00 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.10

2.50

3.00

3.50

4.00

4.50

5.00

5.50

V_IN- V_OUT[V]

V

[V]

IN

Figure 7. Quiescent Current (I_LED= 0 mA)

Figure 8. Output Current vs. Headroom Voltage

22

20

18

16

14

12

10

8

6

4

2

0

100

200

300

400

500

R

[kW]

SET

Figure 9. Output Current vs. R_SETat 25C

www.fairchildsemi.com

FAN5646 • Rev. 1.0.3

5

Circuit Description

Operating Modes

Play and Follow Bits

At power up, the device is in IDLE (“sleep”) Mode until a rising

edge of a CTRL signal is detected. When both the PLAY and

FOLLOW bits are 0, the FAN5646 executes the LED pattern

shown in Figure 10. If the length of the CTRL pulse is less

than 1.7 s, only the initial pulse is seen. A CTRL pulse that is

kept HIGH after the initial 1.7 s pulse causes the FAN5646 to

go into PLAY mode where PULSE1 and PULSE2 are played

as programmed in the registers (see Table 9).

Table 3. PLAY and FOLLOW Bit Definition

PLAY

FOLLOW

Behavior

0

1

0

1

0

1

Default Behavior per Table 1^*

LED Follows CTRL^**

LED Enters PLAY Mode

LED Enters One-Shot Mode

INITIAL 1.7s

LED

One-Shot Mode

This mode is enabled when the PLAY and FOLLOW bits are

both 1. One-Shot Mode is similar to PLAY mode except that

PULSE1 is enabled while PULSE2 is always ignored. In One-

Shot Mode, PULSE1 is played after CTRL is held HIGH for at

least 200 s. Once PULSE1 is initiated, CTRL is ignored until

PULSE1 is completed. If CTRL remains HIGH through the t_OFF

time of PULSE1, PULSE1 continues to replay until CTRL is

lowered. Therefore, One-Shot Mode enables the LED to blink

in the programmed pattern as long as CTRL is HIGH.

CTRL

Figure 10. Initial Pulse Mode Timing

Table 1. CTRL Pin Operation, CONTROL[1:0] = 00

Mode

LED

Entry

IDLE

PLAY

OFF

Play Pattern

Follows CTRL

OFF

CTRL LOW for > 200 s

CTRL HIGH > 2 s

t_RISE

t_ON

t_FALL

t_OFF

FOLLOW

Program

CTRL HIGH < 2 s

CTRL HIGH < 50 s

The behavior described in Table 1 can be changed using the

PLAY and FOLLOW bits (see Table 3).

Figure 11. LED Average Current Profile

In PLAY Mode, the default pattern of PULSE1 repeats when

CTRL is held HIGH while PULSE2 is always ignored (see

Table 2). The FAN5646 plays the programmed sequence for

blinking the LED until CTRL is set LOW. The programmed

LED pattern always starts with PULSE1 and it can have t_ON

and t_OFFtimes that are multiples of 106ms (see Equation (4))

while PULSE2 is disabled when its respective t_ONand t_OFF

times are set to zero.

Table 4. Brightness Steps during Fade Up/Down (12.5%)

I_OUT(DC)= 12.5% of Full Scale

Step #

% of Full Power

t_ON(s)

0

t_OFF(s)

3,333

3,320

3,268

3,177

3,034

2,852

2,617

2,318

0

1

2

3

4

5

6

7

0.00%

0.05%

0.24%

0.60%

1.10%

1.80%

2.70%

3.80%

Table 2. PULSE1 Default Pattern – PLAY Mode

13

65

t_RISE

t_FALL

t_ON

t_OFF

156

299

482

716

1,016

516ms

533ms

1600ms

The IC creates the rise and fall profiles in Figure 11 by

stepping through PWM dimming values given in Table 4 and

Table 5. The SLEW1 and SLEW2 registers control the

brightness of the LED for PULSE1 and PULSE2, respectively.

In the example in Table 2, only the SLEW1 register is

programmed with the brightness level for the LED.

In FOLLOW Mode, the LED+ pin is ON when CTRL is HIGH

and, as such, follows the CTRL signal applied to FAN5646.

^*Default setting for FAN5646_00

^**Default setting for FAN5646_01

www.fairchildsemi.com

FAN5646 • Rev. 1.0.3

6

Table 5. Brightness Steps During Fade Up/Down (100%)

I_OUT(DC)= 100% of Full Scale

% of Full

Table 6. LED Maximum Current, WLCSP or I_SETOpen

I_SETBits

00^***

01

I_LED(MAX)(mA)

5

Step #

t_ON(s)

t_OFF(s)

10

15

20

Power

10

8

169

221

3,164

3,112

3,060

2,995

2,917

2,839

2,747

2,656

2,552

2,448

2,331

2,201

2,057

1,914

1,771

1,602

1,432

1,263

1,068

872

5.1%

11

9

6.6%

I_LEDcan be programmed with an external R_SETresistor to GND

in conjunction with the I_SETbits:

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

273

8.2%

339

10.2%

12.5%

14.8%

17.6%

20.3%

23.4%

26.6%

30.1%

34.0%

38.3%

42.6%

46.9%

52.0%

57.0%

62.1%

68.0%

73.8%

80.1%

86.3%

93.0%

100.0%

K

I_LED



or

417

R_SET 200

(1)

495

K

R_SET



 200

I_LED

586

677

Table 7. LED Programming R_SET

781

I_SETBits

00^***

01

K

885

123

246

369

492

1,003

1,133

1,276

1,419

1,563

1,732

1,901

2,070

2,266

2,461

2,669

2,878

3,099

3,333

10

11

R_SETshould be between 12.1 kW and 100 kW, which

corresponds to a range of 20 mA and 2.5 mA respectively

when the I_SETbits are 01 and I_LED(max)= 10 mA. To achieve

the highest accuracy using an external R_SET, program the

I_SETbits for the I_LEDclosest to the desired I_LEDbased on the

I_SETvalues in Table 6. Then calculate the appropriate R_SET

for the desired I_SETusing Equation (1) with the K value for

the chosen I_SETbit value from Table 7.

RISE and FALL

The IC creates the rise and fall profiles in Figure 11 by

incrementing or decrementing the PWM dimming value at a

rate determined by the SLEW1 and SLEW2 registers. t_RISEor

t_FALLare determined by the following equation:

664

456

234

(2)

(3)

t_RISE 31N_RISE3.33ms

t_FALL 31N_FALL3.33ms

0

Changing the Default Values

where N_RISEand N_FALLare decimal values in the SLEW

registers (Table 9). Therefore, the maximum time for rise or

fall time to or from full current is:

The default values for the customer-accessible registers

produce the fixed t_ON, t_OFF, t_RISE, and t_FALLillustrated in Table 2.

These values can be changed using registers (see Table 9)

accessible through the TinyWire™ single-wire interface.

t_RISE/FALL(max) = 1550ms

If the value of N_RISEor N_FALLis 0, the LED goes to (or from) off

to full brightness with no brightness ramp. Therefore, the

minimum time for controlled brightness stepping to full current

(N_RISE= 1) is:

The PLAY and FOLLOW control bits define the FAN5646 IC

behavior (Table 1) of the CTRL line. In addition, the full-scale

LED current can be changed (Table 6).

LED Full-Scale Current

The full-scale LED current can be set using the I_SETbits

(CONTROL[7:6]) to accommodate a wide variety of LEDs.

t_RISE/FALL(min) = 103 ms

PULSE1 and PULSE2 have independently programmable

t_RISEand t_FALL

.

When CTRL first goes HIGH, the IC determines if an R_SETis

connected. If the I_SETis open or shorted to ground, I_LEDis set

by an internal reference according to Table 6:

^***Default setting for the I_SETbits.

www.fairchildsemi.com

FAN5646 • Rev. 1.0.3

7

Table 8. t_ONand t_OFFMaximum Values

SLOW Bit Maximum

t_ONand t_OFF

The FAN5646 is capable of two pulses of different lengths with

independently programmable t_ON, t_RISE, and t_FALL. The time

between each of these pulses is established by t_OFF

Units

ms

t_ON

t_OFF

t_ON

0

1

1600

4800

3200

9600

.

ms

(4)

(5)

t_ON (SLOW 1) N _ON 106.6ms

t_OFF (SLOW 1) N _OFF 320ms

ms

t_OFF

ms

where SLOW is the value of the SLOW bit (CONTROL[2] –

register), which is 1 or 0. N_ON and N_OFF values are

PULSE1 and PULSE2 register values (Table 9).

If t_ONis 0, the LED current ramps down immediately after

attaining its FINAL value. The minimum t_ONand t_OFFfor

PULSE1 is 6.7 ms, while PULSE2 is disabled when either t_ON

or t_OFFis 0.

If N_ON_PULSE2and N_OFF_PULSE2are both 0, only the t_{ON_PULSE1}

and t_{OFF_PULSE1}are considered.

Table 9. Register Definition

Address Default

Register

7

6

5

4

3

2

1

0

(Hex)

NRISE1: Duration of each brightness

level during LED turn-on

NFALL1: Duration of each brightness level

during LED turn-off

0

55

SLEW1

N_ON1: Duration the LED stays on at

100% brightness

N_OFF1: Duration the LED stays off after

ramping down

1

2

3

55

00

PULSE1

SLEW2

NRISE2: Duration of each brightness

level during LED turn-on

NFALL2: Duration of each brightness level

during LED turn-off

N_ON2: Duration the LED stays on at

100% brightness

N_OFF2: Duration the LED stays off after

ramping down

PULSE2

CONTROL

00⁽³⁾

01⁽⁴⁾

SLOW

PLAY FOLLOW

4

I_SET

RESERVED

Notes:

3. Default value for FAN5646_00.

4. Default value for FAN5646_01.

www.fairchildsemi.com

FAN5646 • Rev. 1.0.3

8

Programming Examples

The example in Table 10 and Figure 12 illustrates the

relationship between the default register contents and the

pattern of the IC in PLAY mode. BOLD signifies the decimal

values of the controlling registers.

The example in Table 11 and Figure 13 illustrates a long-

duration pulse followed by a short-duration pulse with two

seconds between each pulse; with rise and fall times of each

using default values.

Table 10. PULSE1 Default Example (see Table 2 and

Table 11. Long-Short Pattern Example (see Figure 13)

Table 9)

t_FALL1= t_RISE1= 31  5  3.33 ms = 516 ms

t_ON1= 10  106.6 ms =1066 ms

t_OFF1= 9  320 ms =2880 ms

t_FALL1= t_RISE1= 31  5  3.33 ms = 516 ms

t_ON1= 5  106.6 ms =533 ms

t_OFF1= 5  320 ms =1600 ms

t_FALL2= t_RISE2= 31  1  3.33 ms = 103 ms

t_ON2= 2  106.6 ms =213 ms

SLEW1 PULSE1 SLEW2 PULSE2 CONTROL

Register

t_OFF2= 5  320 ms =1600 ms

Value

(HEX)

55

00

02

SLEW1 PULSE1 SLEW2 PULSE2 CONTROL

Register

516ms

533ms

516ms

1600ms

Value

(HEX)

55

A9

11

25

02

PULSE1

Figure 12. PULSE1 Default LED Current Pattern for

Register in Table 10

516ms

1066ms

516ms

2880ms

103ms

213ms

103ms

1600ms

PULSE1

PULSE2

PULSE1

Figure 13. LED Current Waveform for Register Settings in Table 11

www.fairchildsemi.com

FAN5646 • Rev. 1.0.3

9

TinyWire™ Digital Interface

TinyWire is a flexible, general-purpose, binary protocol

designed to minimize the number of pins on the IC while

providing a complete digital interface that can be driven from

any microcontroller or applications processor using “bit

banging” on a general-purpose I/O pin. The interface’s speed

and flexibility accommodate a wide range of processor clock

capabilities. The fully static nature of the interface requires that

the applications processor dedicate only sufficient

uninterrupted attention to bit banging to complete a single

packet. Interrupted packets are ignored and may be

subsequently retransmitted.

Data is written to the selected register at the rising edge of the

STOP bit. A new CONTROL word may start within 4 s of the

falling edge of the STOP bit.

As indicated in Table 1, if CTRL remains LOW for at least

t_RESETafter the falling edge of the STOP bit, the IC reverts to

its IDLE state.

If CTRL remains HIGH for at least t_RESET, the IC executes its

programmed commands.

CONTROL Word

The CONTROL word contains the address of the register that

receives the data, followed by the data to be written. The

CONTROL word is shifted LSB first on the CTRL line, as

shown in Figure 14. The TinyWire protocol operates over a

wide range of t_BITtimes (see Table 13), allowing encoding of

the brightness control bit-stream using a microcontroller

software “bit-bang” loop.

The CONTROL word contains the address of the register to

receive the data followed by the data to be written. The

FAN5646 data transfer is an 11-bit word, with the first three

bits (0 through 2) being the register address, LSB first. The

next eight bits (3 through 10) are the data to be written to the

selected register, LSB first. Data is latched into the selected

register at the rising edge of the STOP bit. A new word may

be transferred to the IC as little as 4s after the falling edge of

the STOP bit.

The CONTROL word begins with the rising edge of CTRL. If

CTRL is HIGH for a greater percentage of the time than it is

LOW between rising edges, the bit is a 1. Conversely, if CTRL

is LOW longer than it is HIGH, the bit is a 0. Observe the

following timing rules to ensure proper data transmission:

Table 14 shows the CONTROL word structure as well as an

example of writing 23H into register 2 (A[2:0] = 010).

Table 14. Address and Data Word

Table 12. Data Bit Definition

BIT

Value

0

1

2

3

4

5

6

7

8

9 10

BIT =

t_LOW

t_HIGH

A0 A1 A2 D0 D1 D2 D3 D4 D5 D6 D7

0

1

> 75% t_BIT

< 25% t_BIT

> 75% t_BIT

Example

0

1

0

1

0

1

0

Table 13. Timing Requirements

Minimum

Maximum

40 s

t_LOW

t_HIGH

500 ns

200 s

40 s

t_RESET

DATA

LATCHED

t_HIGH

t_LOW

LOGIC 0

LOGIC 1

IDLE

t_BIT

t_{RESE T}

STOP BIT

BIT 0

BIT 1

BIT N

Figure 14. TinyWire™ Protocol

www.fairchildsemi.com

FAN5646 • Rev. 1.0.3

10

Physical Dimensions

F

0.03 C

E

A

2X

B

D

0.40

A1

Ø0.20

Cu Pad

0.40

BALL A1

Ø0.30

INDEX AREA

0.03 C

Solder Mask

2X

TOP VIEW

RECOMMENDED LAND PATTERN

(NSMD PAD TYPE)

0.06 C

0.378±0.018

0.208±0.021

0.625

0.547

E

0.05 C

C

SEATING PLANE

D

SIDE VIEWS

NOTES:

A. NO JEDEC REGISTRATION APPLIES.

B. DIMENSIONS ARE IN MILLIMETERS.

0.005

C A B

Ø0.260±0.020

4X

C. DIMENSIONS AND TOLERANCE

PER ASME Y14.5M, 1994.

0.40

B

A

(Y)±0.018

D. DATUM C IS DEFINED BY THE SPHERICAL

CROWNS OF THE BALLS.

0.40

1 2

E. PACKAGE NOMINAL HEIGHT IS 586 MICRONS

±39 MICRONS (547-625 MICRONS).

(X)±0.018

F

F. FOR DIMENSIONS D, E, X, AND Y SEE

PRODUCT DATASHEET.

BOTTOM VIEW

G. DRAWING FILNAME: MKT-UC004ACrev2.

Figure 15. 4-Bump WLCSP, 0.4 mm Pitch

Product-Specific Dimensions

Product

D

E

X

Y

FAN5646UC

0.820 mm

0.210 mm

Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without

notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most

recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which

covers Fairchild products.

Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:

http://www.fairchildsemi.com/packaging/.

www.fairchildsemi.com

FAN5646 • Rev. 1.0.3

11

Physical Dimensions (Continued)

Figure 16. 5-Lead SC70 (EIAJ SC88)

Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without

notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most

recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which

covers Fairchild products.

Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:

http://www.fairchildsemi.com/packaging/.

www.fairchildsemi.com

FAN5646 • Rev. 1.0.3

12

www.fairchildsemi.com

FAN5646 • Rev. 1.0.3

13

ON Semiconductor and

are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.

ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent

coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.

ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability

arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.

Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,

regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or

specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer

application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not

designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification

in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized

application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and

expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such

claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This

literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

LITERATURE FULFILLMENT:

N. American Technical Support: 800−282−9855 Toll Free

USA/Canada

Europe, Middle East and Africa Technical Support:

Phone: 421 33 790 2910

Japan Customer Focus Center

Phone: 81−3−5817−1050

ON Semiconductor Website: www.onsemi.com

Order Literature: http://www.onsemi.com/orderlit

Literature Distribution Center for ON Semiconductor

19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA

Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada

Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada

Email: orderlit@onsemi.com

For additional information, please contact your local

Sales Representative

www.onsemi.com

1


型号：	FAN5646S700X
厂家：	ONSEMI
描述：	LED 驱动器，可编程指示灯 LED 闪烁器，带单线接口驱动光电二极管商用集成电路驱动器
文件：	总16页 (文件大小：1177K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

FAN5646S700X [ONSEMI]

相关型号：

FAN5646S700X_11

FAN5646S701X

FAN5646S701X

FAN5646S701X_11

FAN5646UC00X

FAN5646UC00X

FAN5646UC00X_11

FAN5646UC01X

FAN5646UC01X

FAN5646UC01X_11

FAN5646_11

FAN5660