FDLL457A [ONSEMI]
小信号二极管;
| 型号： | FDLL457A |
| 厂家： | 
ONSEMI |
| 描述： | 小信号二极管 信号二极管 |
| 文件： | 总3页 (文件大小：153K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DATA SHEET
www.onsemi.com
Small Signal Diode
Cathode Band
FDLL457A / 1N457A
ABSOLUTE MAXIMUM RATINGS
(T = 25°C unless otherwise noted) (Note 1)
A
MiniMELF / SOD−80
Symbol
Rating
Value
70
Unit
V
CASE 100AD
V
Maximum Repetitive Reverse Voltage
Average Rectified Forward Current
(Color Band Denotes Cathode)
RRM
I
200
mA
A
F(AV)
I
Non−repetitive Peak Forward Current
Pulse Width = 1.0 s
Pulse Width = 1.0 ms
FSM
MARKING DIAGRAM
1.0
4.0
COLOR BAND MARKING
T
Storage Temperature Range
−65 to +200
°C
°C
STG
DEVICE
1ST BAND
T
J
Operating Junction Temperature
175
FDLL457A
WHITE
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
1. These ratings are limiting values above which the serviceability of any
semiconductor device may be impaired.
FDLL457A = Specific Device Code
Measured on 8.3 ms single half−sine wave or equivalent square wave.
Duty cycle = 4 pulses per minute maximum.
ORDERING INFORMATION
†
Device
FDLL457A
Package
Shipping
THERMAL CHARACTERISTICS
SOD−80
(Pb−Free)
2,500 Units /
Tape & Reel
Symbol
Parameter
Power Dissipation
Max
500
350
Unit
mW
°C
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
P
D
R
Thermal Resistance,
Junction−to−Ambient
q
JA
ELECTRICAL CHARACTERISTICS
(T = 25°C unless otherwise noted)
A
Symbol Parameter
Conditions
= 100 mA
R
Min
Max
Unit
V
R
Breakdown
Voltage
I
85
−
V
V
F
Forward
Voltage
I = 10 mA
F
−
−
1.0
1.0
V
V
F
I = 100 mA
I
R
Reverse
Leakage
V
R
V
R
= 60 V
−
−
25
5.0
nA
mA
= 60 V, T = 150°C
A
C
Total
Capacitance
V
R
= 0, f = 1.0 MHz
−
6.0
pF
T
Product parametric performance is indicated in the Electrical Characteristics for
the listed test conditions, unless otherwise noted. Product performance may not
be indicated by the Electrical Characteristics if operated under different
conditions.
© Semiconductor Components Industries, LLC, 2002
1
Publication Order Number:
April, 2023 − Rev. 2
FDLL457A/D
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
MiniMELF / SOD−80
CASE 100AD
ISSUE O
DATE 30 APR 2012
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
DOCUMENT NUMBER:
DESCRIPTION:
98AON79582E
MINIMELF / SOD−80
PAGE 1 OF 1
onsemi and
are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves
the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation
special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
ADDITIONAL INFORMATION
TECHNICAL PUBLICATIONS:
Technical Library: www.onsemi.com/design/resources/technical−documentation
onsemi Website: www.onsemi.com
ONLINE SUPPORT: www.onsemi.com/support
For additional information, please contact your local Sales Representative at
www.onsemi.com/support/sales
相关型号：
©2020 ICPDF网 联系我们和版权申明