FJE5304D [ONSEMI]
NPN 型三重扩散平面硅晶体管;型号: | FJE5304D |
厂家: | ONSEMI |
描述: | NPN 型三重扩散平面硅晶体管 局域网 开关 晶体管 |
文件: | 总7页 (文件大小:304K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
June 2014
FJE5304D
NPN Triple Diffused Planar Silicon Transistor
Features
Equivalent Circuit
C
• High-Voltage, High-Speed Power Switch Applications
• Wide Safe Operating Area
• Built-in Free-Wheeling diode
• Suitable for Electronic Ballast Applications
B
• Small Variance in Storage Time
TO-126
1
E
1.Emitter 2.Collector 3.Base
Ordering Information
Part Number
FJE5304D
Top Mark
J5304D
Package
TO-126 3L
TO-126 3L
Packing Method
Bulk
Rail
FJE5304DTU
J5304D
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be opera-
ble above the recommended operating conditions and stressing the parts to these levels is not recommended. In addi-
tion, extended exposure to stresses above the recommended operating conditions may affect device reliability. The
absolute maximum ratings are stress ratings only. Values are at TC = 25°C unless otherwise noted.
Symbol
VCBO
VCEO
VEBO
IC
Parameter
Value
Unit
V
Collector-Base Voltage
Collector-Emitter Voltage
Emitter-Base Voltage
Collector Current (DC)
700
400
V
12
V
4
A
ICP
Collector Current (Pulse)(1)
8
A
IB
Base Current (DC)
2
4
A
IBP
Base Current (Pulse)(1)
Storage Temperature Range
A
TSTG
-65 to 150
°C
Note:
1. Pulse test: pulse width ≤ 300 μs, duty cycle ≤ 2%.
© 2004 Fairchild Semiconductor Corporation
FJE5304D Rev. 1.1.0
www.fairchildsemi.com
1
Thermal Characteristics
Values are at TC = 25°C unless otherwise noted.
Symbol
PC
Parameter
Max.
30
Unit
W
Collector Dissipation (TC = 25°C)
RθJC
Thermal Resistance, Junction to Case
Thermal Resistance, Junction to Ambient
4.17
83.3
°C/W
°C/W
RθJA
Electrical Characteristics(2)
Values are at TC = 25°C unless otherwise noted.
Symbol
BVCBO
BVCEO
BVEBO
ICES
Parameter
Conditions
Min.
700
400
12
Typ.
Max.
Unit
V
Collector-Base Breakdown Voltage
IC = 1 mA, IE = 0
Collector-Emitter Breakdown Voltage IC = 5 mA, IB = 0
V
Emitter-Base Breakdown Voltage
Collector Cut-Off Current
Collector Cut-Off Current
Emitter Cut-Off Current
IE = 1 mA, IC = 0
V
VCE = 700 V, VEB = 0
VCE = 400 V, IB = 0
VEB = 12 V, IC = 0
100
250
100
μA
μA
μA
ICEO
IEBO
VCE = 5 V, IC = 10 mA
VCE = 5 V, IC = 2 A
IC = 0.5 A, IB = 0.1 A
IC = 1 A, IB = 0.2 A
IC = 2.5 A, IB = 0.5 A
IC = 0.5 A, IB = 0.1 A
IC = 1 A, IB = 0.2 A
IC = 2.5 A, IB = 0.5 A
10
8
hFE
DC Current Gain
40
0.7
1.0
1.5
1.1
1.2
1.3
2.5
V
CE(sat)
Collector-Emitter Saturation Voltage
V
V
BE(sat)
Vf
Collector-Base Saturation Voltage
V
V
Internal Diode Forward Voltage Drop IF = 2 A
Inductive Load Switching (VCC = 200 V)
tstg
tf
Storage Time
Fall Time
IC = 2 A, IB1 = 0.4 A,
VBE(off) = -5 V,
L = 200 μH
0.6
0.1
μs
μs
Resistive Load Switching (VCC = 250 V)
tstg
tf
Storage Time
Fall Time
IC = 2 A,
IB1 = IB2 = 0.4 A,
TP = 30 μs
2.9
μs
μs
0.2
Note:
2. Pulse test: pulse width ≤ 300 μs, duty cycle ≤ 2%.
© 2004 Fairchild Semiconductor Corporation
FJE5304D Rev. 1.1.0
www.fairchildsemi.com
2
Typical Performance Characteristics
5
100
10
1
Vce=5V
I
= 500mA
IB = 450mA
IB = 400mA
IB = 350mA
Ta=125oC
25oC
4
3
2
1
0
IBB = 300mA
IB = 250mA
IB = 200mA
-25oC
IB = 150mA
IB = 100mA
IB = 50mA
IB = 0
0
1
2
3
4
5
6
7
8
9
10
0.01
0.1
1
10
IC[A], COLLECTOR CURRENT
VCE[V], COLLECTOR-EMITTER VOLTAGE
Figure 1. Static Characteristic
Figure 2. DC Current Gain
10
10
Ic=5IB
Ic=5IB
25OC\b
1
Ta=125OC\b
1
-25OC
25OC
Ta=125OC
-25OC\b
0.1
0.01
0.1
0.01
0.01
0.1
1
10
0.1
1
10
IC[A], COLLECTOR CURRENT
IC[A], COLLECTOR CURRENT
Figure 4. Base-Emitter Saturation Voltage
Figure 3. Collector-Emitter Saturation Voltage
10
1000
VCC = 250V
IC = 5IB1 = -5IB2
tSTG
tSTG
1
100
tF
0.1
tF
VClamp = 200V,
VBE(OFF)=-5V, RBB=0 Ohm,
L=200 uH, IC = 5IB1
0.01
0.1
10
0.1
1
10
1
10
IC[A], COLLECTOR CURRENT
IC[A], COLLECTOR CURRENT
Figure 5. Resistive Load Switching Time
Figure 6. Inductive Load Switching Time
© 2004 Fairchild Semiconductor Corporation
FJE5304D Rev. 1.1.0
www.fairchildsemi.com
3
Typical Performance Characteristics (Continued)
100
100
10
TC=25oC
Vcc=50V,
IB1=1A, IB2 = -1A
L = 1mH
10
1μs
10μs
1ms
1
1
DC
0.1
0.1
0.01
0.01
10
100
1000
10
100
1000
10000
VCE[V], COLLECTOR-EMITTER VOLTAGE
VCE[V], COLLECTOR-EMITTER VOLTAGE
Figure 7. Forward Bias Safe Operating Area
Figure 8. Reverse Bias Safe Operating Area
50
40
30
20
10
0
0
25
50
75
100
125
150
175
TC[oC], CASE TEMPERATURE
Figure 9. Power Derating
© 2004 Fairchild Semiconductor Corporation
FJE5304D Rev. 1.1.0
www.fairchildsemi.com
4
8.30
7.70
3.45
3.05
4.00
3.80
11.20
10.80
14.20 MAX
3.20
1.35
1.95
1.55
1.70
1.50
1.00
E
D
0.85
3X
0.65
#1
0.60
0.45
M
3X
0.254
2.29
TOP VIEW
3°
SIDE VIEW
PRODUCTION
CODE
TERMINAL
LENGTH "D"
TERMINAL
LENGTH "E"
TSSTU
TSTU
NONE
(STD LENGTH)
3.45 - 4.05
2.36 - 2.96
6.45-7.45
5.36-6.36
FRONT VIEW
12.76 - 13.36
15.76-16.76
NOTES:
A. NO INDUSTRY STANDARD APPLIES TO THIS
PACKAGE
B. ALL DIMENSIONS ARE IN MILLIMETERS
C. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD
FLASH, AND TIE BAR PROTRUSIONS
D
FOR TERMINAL LENGTH "D", REFER TO TABLE
FOR TERMINAL LENGTH "E", REFER TO TABLE
E
F. DRAWING FILENAME: MKT-TO126AArev2
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC
www.onsemi.com
相关型号:
FJE5304DTU
NPN Triple Diffused Planar Silicon Transistor, TO-126 (SOT32) UNIFIED DRAWING (TSTU, TSSTU, STANDARD), 1920/RAIL
FAIRCHILD
©2020 ICPDF网 联系我们和版权申明