FXL4T245BQX [ONSEMI]
低压双电源4位信号转换器（带可配置电压电源和信号电平以及3态输出）;
| 型号： | FXL4T245BQX |
| 厂家： | 
ONSEMI |
| 描述： | 低压双电源4位信号转换器（带可配置电压电源和信号电平以及3态输出） 接口集成电路 转换器 |
| 文件： | 总11页 (文件大小：639K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
April 2004
Revised June 2004
FXL4T245
Low Voltage Dual Supply 4-Bit Signal Translator
with Configurable Voltage Supplies
and Signal Levels and 3-STATE Outputs
General Description
Features
■ Bi-directional interface between any 2 levels from 1.1V
The FXL4T245 is a configurable dual-voltage-supply trans-
lator designed for bi-directional voltage translation of sig-
nals between two voltage levels. The device allows
translation between voltages as high as 3.6V to as low as
1.1V. The A Port tracks the VCCA level, and the B Port
to 3.6V
■ Fully configurable, inputs track VCC level
■ Non-preferential power-up sequencing; either VCC may
be powered-up first
tracks the VCCB level. Both ports are designed to accept
■ No power-up sequencing required
■ Outputs remain in 3-STATE until active VCC level is
reached
supply voltage levels from 1.1V to 3.6V. This allows for bi-
directional voltage translation over a variety of voltage lev-
els: 1.2V, 1.5V, 1.8V, 2.5V, and 3.3V.
The device remains in 3-STATE until both VCCs reach
active levels allowing either VCC to be powered-up first.
■ Outputs switch to 3-STATE if either VCC is at GND
■ Power-off protection
The device also contains power down control circuits that
place the device in 3-STATE if either VCC is removed.
■ Control inputs (T/R, OE) levels are referenced to VCCA
voltage
The Transmit/Receive (T/R) input determines the direction
of data flow through the device. The OE input, when HIGH,
■ Packaged in 14-terminal DQFN (2.5mm x 3.0mm)
package
disables both the
A and B Ports by placing them in
■ ESD protection exceeds:
3-STATE condition. The FXL4T245 is designed so that the
• 4kV HBM ESD
control pins (T/R and OE) are supplied by VCCA
.
(per JESD22-A114 & Mil Std 883e 3015.7)
• 8kV HBM I/O to GND ESD
(per JESD22-A114 & Mil Std 883e 3015.7)
• 1kV CDM ESD (per ESD STM 5.3)
• 200V MM ESD (per JESD22-A115 & ESD STM5.2)
Ordering Code:
Package
Order Number
Package Description
Number
FXL4T245BQX
MLP014A
14-Terminal Depopulated Quad Very-Thin Flat Pack No Leads (DQFN), JEDEC MO-241,
2.5 x 3.0mm
© 2004 Fairchild Semiconductor Corporation
DS500891
www.fairchildsemi.com
Terminal Descriptions
Truth Table
Terminal
Names
Description
Inputs
Outputs
OE
L
T/R
L
OE
Output Enable Input
Bus B Data to Bus A
Bus A Data to Bus B
T/R
Transmit/Receive Input
Side A Inputs or 3-STATE Outputs
Side B Inputs or 3-STATE Outputs
Side A Power Supply
Side B Power Supply
Ground
L
H
An
H = HIGH Voltage Level
L = LOW Voltage Level
X = Don’t Care
Bn
VCCA
VCCB
GND
Connection Diagram
Terminal Assignment
Terminal Number
Terminal Name
Terminal Assignments for DQFN
1
2
3
4
5
VCCA
A0
A1
A2
A3
6
7
8
T/R
GND
GND
9
OE
B3
10
11
12
13
14
B2
B1
B0
VCCB
(Top View)
Power-Up/Power-Down Sequencing
FXL translators offer an advantage in that either VCC may
The recommended power-up sequence is the following:
1. Apply power to either VCC
be powered up first. This benefit derives from the chip
design. When either VCC is at 0 volts, outputs are in a
.
2. Apply power to the T/R input (Logic HIGH for A-to-B
operation; Logic LOW for B-to-A operation) and to the
respective data inputs (A Port or B Port). This may
occur at the same time as Step 1.
HIGH-Impedance state. The control inputs (T/R and OE)
are designed to track the VCCA supply. A pull-up resistor
tying OE to VCCA should be used to ensure that bus con-
tention, excessive currents, or oscillations do not occur
during power-up/power-down. The size of the pull-up resis-
tor is based upon the current-sinking capability of the OE
driver.
3. Apply power to other VCC
.
4. Drive the OE input LOW to enable the device.
The recommended power-down sequence is the following:
1. Drive OE input HIGH to disable the device.
2. Remove power from either VCC
.
3. Remove power from other VCC
.
www.fairchildsemi.com
2
Absolute Maximum Ratings(Note 1)
Recommended Operating
Conditions (Note 3)
Supply Voltage
VCCA
−0.5V to +4.6V Power Supply Operating (VCCA or VCCB
)
1.1V to 3.6V
VCCB
−0.5V to +4.6V Input Voltage
DC Input Voltage (VI)
I/O Port A
Port A
0.0V to 3.6V
0.0V to 3.6V
0.0V to VCCA
−0.5V to +4.6V
−0.5V to +4.6V
−0.5V to +4.6V
Port B
I/O Port B
Control Inputs (T/R, OE)
Output Current in IOH/IOL
VCC
Control Inputs (T/R, OE)
Output Voltage (VO) (Note 2)
Outputs 3-STATE
Outputs Active (An)
Outputs Active (Bn)
DC Input Diode Current (IIK) VI < 0V
−0.5V to +4.6V
−0.5V to VCCA + 0.5V
−0.5V to VCCB + 0.5V
−50 mA
3.0V to 3.6V
±24 mA
±18 mA
2.3V to 2.7V
1.65V to 1.95V
1.4V to 1.65V
1.1V to 1.4V
±6 mA
±2 mA
DC Output Diode Current (IOK
)
±0.5 mA
V
V
O < 0V
−50 mA Free Air Operating Temperature (TA)
+50 mA Minimum Input Edge Rate (∆V/∆t)
−40°C to +85°C
O > VCC
DC Output Source/Sink Current
(IOH/IOL
DC VCC or Ground Current per
Supply Pin (ICC
Storage Temperature Range (TSTG
V
CCA/B = 1.1V to 3.6V
10 ns/V
)
−50 mA / +50 mA
Note 1: The “Absolute Maximum Ratings” are those values beyond which
the safety of the device cannot be guaranteed. The device should not be
operated at these limits. The parametric values defined in the Electrical
Characteristics tables are not guaranteed at the absolute maximum ratings.
The “Recommended Operating Conditions” table will define the conditions
for actual device operation.
)
±100 mA
)
−65°C to +150°C
Note 2: IO Absolute Maximum Rating must be observed.
Note 3: All unused inputs must be held at VCCI or GND.
DC Electrical Characteristics
VCCI
VCCO
(V)
Symbol
Parameter
Conditions
Min
Max
Units
(V)
VIH
High Level Input Voltage
Data Inputs An, Bn
2.7 - 3.6
2.3 - 2.7
2.0
1.6
(Note 4)
1.65 - 2.3 1.1 - 3.6 0.65 x VCCI
1.4 - 1.65
1.1 - 1.4
0.65 x VCCI
0.9 x VCCI
V
Control Pins/OE, T/R
2.7 - 3.6
2.3 - 2.7
2.0
1.6
(Referenced to VCCA
)
1.65 - 2.3 1.1 - 3.6 0.65 x VCCA
1.4 - 1.65
1.1 - 1.4
0.65 x VCCA
0.9 x VCCA
VIL
Low Level Input Voltage
Data Inputs An, Bn
2.7 - 3.6
0.8
(Note 4)
2.3 - 2.7
0.7
1.65 - 2.3 1.1 - 3.6
1.4 - 1.65
1.1 - 1.4
0.35 x VCCI
0.35 x VCCI
0.1 x VCCI
V
Control Pins/OE, T/R
2.7 - 3.6
0.8
(Referenced to VCCA
)
2.3 - 2.7
0.7
1.65 - 2.3 1.1 - 3.6
1.4 - 1.65
0.35 x VCCA
0.35 x VCCA
0.1 x VCCA
1.1 - 1.4
3
www.fairchildsemi.com
DC Electrical Characteristics (Continued)
VCCA
VCCB
Symbol
Parameter
Conditions
Min
Max
Units
(V)
1.1 - 3.6
2.7
(V)
1.1 - 3.6
2.7
VOH
High Level Output Voltage
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
OH = −100 µA
VCC0 - 0.2
2.2
(Note 5)
OH = −12 mA
OH = −18 mA
OH = −24 mA
OH = −6 mA
OH = −12 mA
OH = −18 mA
OH = −6 mA
OH = −2 mA
OH = −0.5 mA
OL = 100µA
OL = 12 mA
OL = 18 mA
OL = 24 mA
OL =12 mA
3.0
3.0
2.4
3.0
3.0
2.2
2.3
2.3
2.0
V
2.3
2.3
1.8
2.3
2.3
1.7
1.65
1.4
1.65
1.4
1.25
1.05
1.1
1.1
0.75 x VCC0
VOL
Low Level Output Voltage
1.1 - 3.6
2.7
1.1- 3.6
2.7
0.2
0.4
(Note 5)
3.0
3.0
0.4
3.0
3.0
0.55
0.4
2.3
2.3
V
OL = 18 mA
OL = 6 mA
2.3
2.3
0.6
1.65
1.4
1.65
1.4
0.3
OL = 2 mA
0.35
0.3 x VCC0
±1.0
OL = 0.5 mA
1.1
1.1
II
Input Leakage Current. Control Pins VI = VCCA or GND
1.1 - 3.6
0
3.6
µA
µA
IOFF
Power Off Leakage Current
An, VI or VO = 0V to 3.6V
Bn, VI or VO = 0V to 3.6V
3.6
±10.0
±10.0
3.6
0
IOZ
3-STATE Output Leakage
0 ≤ VO ≤ 3.6V
An, Bn
Bn,
OE = VIH
3.6
0
3.6
3.6
±10.0
+10.0
(Note 6)
OE = Don’t Care
OE = Don’t Care
µA
VI = VIH or VIL
An,
3.6
1.1 - 3.6
1.1 - 3.6
0
0
+10.0
20.0
I
I
CCA/B (Note 7) Quiescent Supply Current
VI = VCCI or GND; IO = 0
VI = VCCI or GND; IO = 0
VI = VCCA or GND; IO = 0
VI = VCCA or GND; IO = 0
VI = VCCB or GND; IO = 0
VI = VCCB or GND; IO = 0
1.1 - 3.6
1.1 - 3.6
1.1 - 3.6
0
µA
µA
µA
µA
µA
µA
CCZ (Note 7)
Quiescent Supply Current
Quiescent Supply Current
20.0
ICCA
−10.0
10.0
1.1 - 3.6
1.1 - 3.6
0
ICCB
Quiescent Supply Current
0
−10.0
10.0
1.1 - 3.6
∆ICCA/B
Increase in ICC per Input;
VIH = 3.0
3.6
3.6
500
µA
Other Inputs at VCC or GND
Note 4: VCCI = the VCC associated with the data input under test.
Note 5: VCCO = the VCC associated with the output under test.
Note 6: Don’t Care = Any valid logic level.
Note 7: Reflects current per supply, VCCA or VCCB
.
www.fairchildsemi.com
4
AC Electrical Characteristics VCCA = 3.0V to 3.6V
T
A = −40°C to +85°C
VCCB
1.65V to 1.95V
VCCB
3.0V to 3.6V
=
VCCB
2.3V to 2.7V
=
=
VCCB
1.4V to 1.6V
=
VCCB
1.1V to 1.3V
=
Symbol
Parameter
Units
Min
0.2
0.2
Max
3.5
Min
0.3
0.2
Max
3.9
Min
0.5
0.3
Max
5.4
Min
0.6
0.5
Max
6.8
Min
1.4
0.8
Max
22.0
13.0
tPLH, tPHL Propagation Delay A to B
Propagation Delay B to A
ns
ns
3.5
3.8
4.0
4.3
tPZH, tPZL Output Enable OE to B
Output Enable OE to A
0.5
0.5
0.2
0.2
4.0
4.0
3.8
3.7
0.7
0.5
0.2
0.2
4.4
4.0
4.0
3.7
1.0
0.5
0.7
0.2
5.9
4.0
4.8
3.7
1.0
0.5
1.5
0.2
6.4
4.0
6.2
3.7
1.5
0.5
2.0
0.2
17.0
4.0
tPHZ, tPLZ Output Disable OE to B
Output Disable OE to A
17.0
3.7
ns
AC Electrical Characteristics VCCA = 2.3V to 2.7V
T
A = −40°C to +85°C
VCCB
1.65V to 1.95V
VCCB
3.0V to 3.6V
=
VCCB
2.3V to 2.7V
=
=
VCCB
1.4V to 1.6V
=
VCCB
1.1V to 1.3V
=
Symbol
Parameter
Units
Min
0.2
0.3
Max
3.8
Min
0.4
0.4
Max
4.2
Min
0.5
0.5
Max
5.6
Min
0.8
0.5
Max
6.9
Min
1.4
1.0
Max
22.0
7.0
tPLH, tPHL Propagation Delay A to B
Propagation Delay B to A
ns
ns
3.9
4.2
4.5
4.8
t
PZH, tPZL Output Enable OE to B
Output Enable OE to A
0.6
0.6
0.2
0.2
4.2
4.5
4.1
4.0
0.8
0.6
0.2
0.2
4.6
4.5
4.3
4.0
1.0
0.6
0.7
0.2
6.0
4.5
4.8
4.0
1.0
0.6
1.5
0.2
6.8
4.5
6.7
4.0
1.5
0.6
2.0
0.2
17.0
4.5
tPHZ, tPLZ Output Disable OE to B
Output Disable OE to A
17.0
4.0
ns
AC Electrical Characteristics VCCA = 1.65V to 1.95V
T
A = −40°C to +85°C
VCCB
1.65V to 1.95V
VCCB
3.0V to 3.6V
=
VCCB
2.3V to 2.7V
=
=
VCCB
1.4V to 1.6V
=
VCCB
1.1V to 1.3V
=
Symbol
Parameter
Units
Min
0.3
0.5
Max
4.0
Min
0.5
0.5
Max
4.5
Min
0.8
0.8
Max
5.7
Min
0.9
1.0
Max
7.1
Min
1.5
1.2
Max
22.0
8.0
tPLH, tPHL Propagation Delay A to B
Propagation Delay B to A
ns
ns
5.4
5.6
5.7
6.0
tPZH, tPZL Output Enable OE to B
Output Enable OE to A
0.6
1.0
0.2
0.5
5.2
6.7
5.1
5.0
0.8
1.0
0.2
0.5
5.4
6.7
5.2
5.0
1.2
1.0
0.8
0.5
6.9
6.7
5.2
5.0
1.2
1.0
1.5
0.5
7.2
6.7
7.0
5.0
1.5
1.0
2.0
0.5
18.0
6.7
tPHZ, tPLZ Output Disable OE to B
Output Disable OE to A
17.0
5.0
ns
AC Electrical Characteristics VCCA = 1.4V to 1.6V
T
A = −40°C to +85°C
VCCB
1.65V to 1.95V
VCCB
3.0V to 3.6V
=
VCCB
2.3V to 2.7V
=
=
VCCB
1.4V to 1.6V
=
VCCB
1.1V to 1.3V
=
Symbol
Parameter
Units
Min
0.5
0.6
Max
4.3
Min
0.5
0.8
Max
4.8
Min
1.0
0.9
Max
6.0
Min
1.0
1.0
Max
7.3
Min
1.5
1.3
Max
22.0
9.5
tPLH, tPHL Propagation Delay A to B
Propagation Delay B to A
ns
ns
6.8
6.9
7.1
7.3
tPZH, tPZL Output Enable OE to B
Output Enable OE to A
1.1
1.0
0.4
1.0
7.5
7.5
6.1
6.0
1.1
1.0
0.4
1.0
7.6
7.5
6.2
6.0
1.3
1.0
0.9
1.0
7.7
7.5
6.2
6.0
1.4
1.0
1.5
1.0
7.9
7.5
7.5
6.0
2.0
1.0
2.0
1.0
20.0
7.5
tPHZ, tPLZ Output Disable OE to B
Output Disable OE to A
18.0
6.0
ns
5
www.fairchildsemi.com
AC Electrical Characteristics VCCA = 1.1V to 1.3V
T
A = −40°C to +85°C
VCCB
1.65V to 1.95V
VCCB
3.0V to 3.6V
=
VCCB
2.3V to 2.7V
=
=
VCCB
1.4V to 1.6V
=
VCCB
1.1V to 1.3V
=
Symbol
Parameter
Units
Min
0.8
1.4
Max
13.0
22.0
Min
1.0
1.4
Max
7.0
Min
1.2
1.5
Max
8.0
Min
1.3
1.5
Max
9.5
Min
2.0
2.0
Max
24.0
24.0
tPLH, tPHL Propagation Delay A to B
Propagation Delay B to A
ns
ns
22.0
22.0
22.0
tPZH, tPZL Output Enable OE to B
Output Enable OE to A
1.0
2.0
1.0
2.0
12.0
22.0
15.0
15.0
1.0
2.0
0.7
2.0
9.0
22.0
7.0
2.0
2.0
1.0
2.0
10.0
22.0
8.0
2.0
2.0
2.0
2.0
11.0
22.0
10.0
12.0
2.0
2.0
2.0
2.0
24.0
22.0
20.0
12.0
tPHZ, tPLZ Output Disable OE to B
Output Disable OE to A
ns
12.0
12.0
Capacitance
T
A = +25°C
Symbol
Parameter
Conditions
Units
Typical
CIN
Input Capacitance Control Pins (OE, T/R)
Input/Output Capacitance An, Bn Ports
Power Dissipation Capacitance
V
V
V
CCA = VCCB = 3.3V, VI = 0V or VCCA/B
CCA = VCCB = 3.3V, VI = 0V or VCCA/B
4.0
5.0
pF
pF
pF
CI/O
CPD
CCA = VCCB = 3.3V, VI = 0V or VCC, F = 10 MHz
20.0
www.fairchildsemi.com
6
AC Loading and Waveforms
TEST
SWITCH
tPLH, tPHL
OPEN
tPLZ, tPZL
VCCO x 2 at VCCO = 3.3 ± 0.3V, 2.5V ± 0.2V,
1.8V ± 0.15V, 1.5V ± 0.1V, 1.2V ± 0.1V
tPHZ, tPZH
GND
FIGURE 1. AC Test Circuit
AC Load Table
VCCO
CL
RL
Rtr1
2 kΩ
2 kΩ
2 kΩ
2 kΩ
2 kΩ
1.2V ± 0.1V
1.5V ± 0.1V
1.8V ± 0.15V
2.5V ± 0.2V
3.3V ± 0.3V
15 pF
15 pF
15 pF
15 pF
15 pF
2 kΩ
2 kΩ
2 kΩ
2 kΩ
2 kΩ
Note: Input tR = tF = 2.0 ns, 10% to 90%
Note: Input tR = tF = 2.0 ns, 10% to 90%
Input tR = tF = 2.5ns, 10% to 90%, @ VI = 3.0V to 3.6V only
Input tR = tF = 2.5ns, 10% to 90%, @ VI = 3.0V to 3.6V only
FIGURE 2. Waveform for Inverting
and Non-Inverting Functions
FIGURE 3. 3-STATE Output Low Enable
and Disable Times for Low Voltage Logic
Note: Input tR = tF = 2.0 ns, 10% to 90%
Input tR = tF = 2.5ns, 10% to 90%, @ VI = 3.0V to 3.6V only
FIGURE 4. 3-STATE Output High Enable and Disable Times for Low Voltage Logic
VCC
Symbol
3.3V ± 0.3V
VCCI/2
2.5V ± 0.2V
VCCI/2
1.8V ± 0.15V
VCCI/2
1.5V ± 0.1V
VCCI/2
1.2V ± 0.1V
VCCI/2
Vmi
Vmo
VX
VCCO/2
VCCO/2
VCCO/2
VCCO/2
VCCO/2
VOH − 0.3V
V
OH − 0.15V
OL + 0.15V
V
OH − 0.15V
OL + 0.15V
V
OH − 0.1V
OL + 01V
VOH − 0.1V
VY
VOL + 0.3V
V
V
V
V
OL + 01V
Note: For Vmi: VCCI = VCCA for Control Pins T/R and OE, or VCCA/2
7
www.fairchildsemi.com
Tape and Reel Specification
Tape Format for DQFN
Package
Tape
Section
Number
Cavities
125 (typ)
3000
Cavity
Status
Empty
Filled
Cover Tape
Status
Designator
Leader (Start End)
Carrier
Sealed
BQX
Sealed
Trailer (Hub End)
75 (typ)
Empty
Sealed
TAPE DIMENSIONS inches (millimeters)
REEL DIMENSIONS inches (millimeters)
Tape Size
A
B
C
D
N
W1
W2
13.0
0.059
(1.50)
0.512
(13.00)
0.795
(20.20)
2.165
0.488
(12.4)
0.724
(18.4)
12 mm
(330.0)
(55.00)
www.fairchildsemi.com
8
Physical Dimensions inches (millimeters) unless otherwise noted
14-Terminal Depopulated Quad Very-Thin Flat Pack No Leads (DQFN), JEDEC MO-241, 2.5 x 3.0mm
Package Number MLP014A
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be rea-
sonably expected to result in a significant injury to the
user.
2. A critical component in any component of a life support
device or system whose failure to perform can be rea-
sonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
www.fairchildsemi.com
9
www.fairchildsemi.com
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC
www.onsemi.com
相关型号：
FXL4TD245
Low Voltage Dual Supply 4-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE
FAIRCHILD
FXL4TD245BQX
Low Voltage Dual Supply 4-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE
FAIRCHILD
FXL4TD245UMX
Low Voltage Dual Supply 4-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs and Independent Direction Controls, 16L,UMLP,QUAD,ULTRATHIN MLP, 1.8 X 2.6 MM BODY, 5000/TAPE REEL
FAIRCHILD
FXL5T244
Low Voltage Dual Supply 5-Bit Signal Translator with Configurable Voltage Supplies with Configurable Voltage Supplies
FAIRCHILD
FXL5T244BQX
Low Voltage Dual Supply 5-Bit Signal Translator with Configurable Voltage Supplies with Configurable Voltage Supplies
FAIRCHILD
©2020 ICPDF网 联系我们和版权申明