HBL2020RP [ONSEMI]
1-Channel ESD Protector;
| 型号： | HBL2020RP |
| 厂家： | 
ONSEMI |
| 描述： | 1-Channel ESD Protector |
| 文件： | 总3页 (文件大小：47K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
HBL2020RP
1-Channel ESD Protector
Product Description
The HBL2020RP provides robust ESD protection for sensitive parts
that may be subjected to electrostatic discharge (ESD). The tiny form
factor and single wirebond requirement enables it to be used in very
confined spaces. The electrical ‘back−to−back zener’ configuration
also provides ESD protection in cases where nodes with AC signals
are present. This device is designed and characterized to safely
dissipate ESD strikes of at least 8 kV, according to the
MIL−STD−883 (Method 3015) specification for Human Body Model
(HBM) ESD.
www.onsemi.com
Features
• Compact Die Protects from ESD Discharges
• Almost No Conduction at Signal Amplitudes Less Than 4 V
• ESD Protection Over 8 kV Contact Discharge per MIL_STD_883
International ESD Standard
Applications
• LED Lighting
• Modules
• Interface Circuits
Figure 1. Electrical Schematic
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 2 of this data sheet.
© Semiconductor Components Industries, LLC, 2015
1
Publication Order Number:
June, 2015 − Rev. 0
HBL2020/D
HBL2020RP
CURRENT/VOLTAGE GRAPH
Symbol
Description
I
Positive Clamping Current
Positive Clamping Voltage
CL+
V
CL+
I
Leakage Current at V
L2+
L2+
V
Voltage Condition: +14V
Leakage Current at V
L2+
L1+
I
L1+
V
Voltage Condition: +4V
L1+
CL−
I
Negative Clamping Current
Negative Clamping Voltage
V
CL−
I
Leakage Current at V
L1−
L1−
V
L1−
Voltage Condition: −4V
NOTE: The polarity in the above graph corresponds to the
polarity convention shown in the application diagram.
Figure 2.
ORDERING INFORMATION
Ordering Part Number
Topside Metal
Backside Metal
Thickness
Shipping Method
HBL2020RP
Al
LCBM
4 mils
Metal Frame
ABSOLUTE MAXIMUM RATINGS
Rating
Unit
°C
Parameter
Operating Temperature Range
Storage Temperature Range
−40 to +150
−65 to +150
°C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
STANDARD OPERATING CONDITIONS
Rating
Unit
Parameter
Operating Temperature Range
−40 to +150
°C
www.onsemi.com
2
HBL2020RP
ELECTRICAL OPERATING CHARACTERISTICS (See Note 1)
Min
Typ
Max
Unit
Symbol
Parameter
Test Conditions
I
Leakage Current
V = 4 V, 150°C (Note 2)
4.0
mA
mA
mA
LEAK
V = 4 V, 25°C (V
)
0.3 (I
)
)
L1
L1
V = +14 V, 25°C (V
)
0.5 (I
L2+
L2+
V
CL
Signal Clamp Voltage
Positive polarity on signal node (V
T = 25°C;
V
A
)
at 10 mA (I
)
+16
−9.0
+19
−7.0
+22
−5.0
CL+
CL+
Negative polarity on signal node (V
)
at −10 mA (I
)
CL−
CL−
V
ESD
ESD Protection − withstand voltage:
Human Body Model (MIL−STD−883, Method 3015) (Note 2)
T = 25°C
8
kV
A
1. Operating characteristics are over standard operating conditions unless otherwise specified.
2. This parameter is guaranteed by design and/or characterization.
MECHANICAL DETAILS
MECHANICAL SPECIFICATIONS
Dimensions Diagram
Parameter
Composition
Condition
Unit
Sawn Die Size:
200 mm x 200 mm
Silicon wafer,
p+ doped
Die shape
Square
Length (sawn)
Width (sawn)
200
mm
mm
mils
mm
mm
200
Thickness
4
Top pad length
Top pad width
Top pad composition
Back metal (underside)
125
125
Al (Aluminum)
LCBM
Top Pad Opening:
125 mm x 125 mm
Figure 3. Die Dimensions
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks,
copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC
reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any
particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without
limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications
and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC
does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where
personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and
its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,
any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture
of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
For additional information, please contact your local
Sales Representative
HBL2020/D
相关型号：
©2020 ICPDF网 联系我们和版权申明