LA42052-E [ONSEMI]
Monolithic Linear IC Audio Output for TV application 5W Ã 2ch Power Amplifier; 单片线性IC音频输出电视应用5W谩?双声道功率放大器型号: | LA42052-E |
厂家: | ONSEMI |
描述: | Monolithic Linear IC Audio Output for TV application 5W Ã 2ch Power Amplifier |
文件: | 总7页 (文件大小:91K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Ordering number : ENA0314A
Monolithic Linear IC
Audio Output for TV application
LA42052
5W × 2ch Power Amplifier
Overview
LA42052 is 5W 2-channel AF power amplifier intended for televisions.
Functions
• 5W × 2 channels (V
= 18V, R = 8Ω)
L
CC
• Standby function
• Pop noise reduction function
• Ripple filter
• Thermal protection circuit
LA42000 series is power IC which made Pin compatible altogether in 5 to 15W. They consist of four kinds of power ICs
(mono, stereo, mono with volume function, stereo with volume function. They realized PCB layout communalization of an
audio power block of TV).
Channel
Model name
P
Volume
O
Monaural
Stereo
{
LA42051
LA42052
LA42351
LA42352
LA42071
LA42072
LA42152
5W
5W
5W
5W
7W
7W
15W
{
{
{
{
{
{
{
{
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer
's products or
equipment.
51408 MS PC/83006/42606 MS JK B8-7286 No.A0314-1/7
LA42052
Specifications
Maximum Ratings at Ta = 25°C
Parameter
Maximum supply voltage
Allowable power dissipation
Maximum junction temperature
Thermal resistance
Symbol
Conditions
Ratings
unit
V
V
max
No signal
Infinitely heat sink
24
15
CC
Pd max
Tj max
θjc
W
150
°C
3
°C/W
°C
Operating temperature
Storage temperature
Topr
-25 to +75
-40 to +150
Tstg
°C
Operating Conditions at Ta = 25°C
Parameter
Symbol
Conditions
Ratings
unit
V
Recommended supply voltage
Recommended load resistance
Allowable operating voltage range
V
18
8
CC
R
Ω
L
V
op
5.5 to 22
V
CC
Electrical Characteristics at Ta = 25°C, V
= 18V, R = 8Ω, f = 1kHz, Rg=600Ω
CC
L
Ratings
typ
Parameter
Symbol
Conditions
min
Unit
max
10
Standby current
I
Amplifier off
Rg = 0
1
μA
mA
W
STB
Quiescent current
Output power
I
18
4
50
5
100
CCO
P
THD = 10%
O
Total harmonic distortion
Voltage gain
THD
VG
P
V
= 1W
0.15
35
0.4
37
%
O
= 0dBm
33
dB
O
Output noise voltage
Ripple rejection
V
Rg = 0, BPF = 20Hz to 20kHz
0.05
60
0.25
mVrms
dB
NO
SVRR
Rg = 0, f = 100Hz, V R = 0dBm
50
50
1.0
0
R
CC
Channel separation
CH Sep.
Rg = 10kΩ, V = 0dBm
60
dB
O
Standby control voltage
(The Pin 5 voltage)
V
-H
-L
Amplifier on
Amplifier off
5
0.5
39
V
STB
V
V
STB
Ri
Input resistance
21
30
kΩ
Package Dimensions
unit : mm
3107B
Pd max - Ta
18
Al heat sink Mounting
Torque 39N⋅cm
Flat washer
2.4
25.6
16
15
14
Infinite heat sink.
(
2.0)
(10.0)
C0.7
3.4
Silicone greas
applird
100×100×1.5mm3
12
11.7
θj=3°C/W
10
8
50×50×1.5mm3
6
5.8
4
2
0
No heat sink.
1
13
0.5
1.15
0.4
1.2
2.0
-20
0
20
40
60
80
100
120
140
160
(0.8)
Ambient temperature, Ta - °C
SANYO : SIP13H
No.A0314-2/7
LA42052
Block Diagram
Standby
5
V
CC
7
Input amplifier
Output amplifier
IN1
2
3
4
OUT1
12
10
8
Power
GND
PRE
GND
Thermal protection circuit
REF amplifier
OUT2
IN2
Input amplifier
Output amplifier
Ripple Filter Block
Pop noise prevention Block
1
6
Ripple
Filter
P.P
Application Circuit Example
LA42052
Ripple
Filter
PRE
GND
PWR
IN1
2
IN2
4
STB
5
P.P
V
OUT2
8
N.C.
9
GND
N.C. OUT1 N.C.
CC
1
+
3
6
+
7
C5
10
11
12
13
C3
C4
1000μF
100μF
4.7μF
C6
C7
/25V
+
+
+
/16V
/16V
C1
1μF
C2
470μF
470μF
1μF
*
*
/16V
/16V
/10V
/10V
R
R
L
L
No.A0314-3/7
LA42052
External Components
C1, C2 : Input coupling capacitors, which are recommended to be 1.0μF or less.
The input pin voltage 2V ( about 1.4V).
BE
Determine the polarity orientation of these capacitors based on the DC current from the circuit
connected to the LA42052 front end.
C3
C4
C5
: The recommended value for the Ripple filter capacitor is 100μF.
: The recommended value for the P.P capacitor 4.7μF. It is a capacitor for there being small Pop sound.
: Power supply capacitor.
C6, C7 : The recommended value for the output capacitor is 470μF.
1. Standby Function (Pin 5)
By means of controlling pin 5 to high and low, the power
Supply can be set to ON and OFF.
Control Voltage of pin 5
Pin 5 voltage
Amplifier
Standby
ON
0 to 0.5
OFF
1.0 to 5.0
ON
OFF
When the impression voltage of V is high,
S
I want to stop 5 pin inflow current.
R
STB
2kΩ
V
S
5
Restriction resistance (R ) is inserted in a case.
STB
2kΩ
VS = 5V, R
STB
= 5.1kΩ
5 pin inflow current = about 750µA
5 pin voltage = about 1.2V
2. Ripple filter and Mute function (Pin 1)
Pin voltage is approx. 1/2 V
CC
The recommended value for the Ripple filter capacitor is 100µF.
Muting :
The output signal can be controlled by connecting pin 1(Ripple filter) to ground via a resistance of 300 to 500Ω.
If resistance is higher than 750Ω, the suppression ratio will decrease.
3. Input Pin (Pin 2,4)
Voltage at the input pins is approx. 2V (about 1.4V)
BE
Determine the polarity orientation of these capacitors based on the DC current from the circuit
Connected to the LA42052 front end.
Input resistance is approx. 30kΩ (typ)
The recommended value for the input capacitor is 1.0µF.
4. P.P (Pin 6)
The Pin 6 is Terminal for there being small pop sound
at the time of power supply ON/OFF.
C4 recommends 4.7µF.
V
CC
When capacitance is higher 10µF, the sound will not
be cut off when setting the power supply OFF.
5kΩ
5kΩ
6
C4
4.7μF
+
V
– V
(about 0.3V) – 5.6V
2
CC
CE
Pin 6 voltage =
+5.6V
No.A0314-4/7
LA42052
Usage Notes
1. Lightening (power supply - output short-circuit) and ground fault (GND - output short-circuit) protective circuits are
not incorporated. Due care must be taken during handling of the product.
2. The thermal protective circuit is incorporated and activated when the junction temperature (Tj) rises above about
160°C.
This circuit controls the output gradually to the attenuated condition.
3. Always ensure the sufficient margin for the supply voltage, etc. to operate the product within the area where the
maximum rating will never be exceeded. Namely, the maximum rating may be exceeded due to the slight change in
conditions, resulting in damage, if the product is used around the maximum rating.
No.A0314-5/7
LA42052
I
– V
CC
P
– V
O CC
CCO
80
60
40
10
8
R
= 8Ω
Rg = 600Ω
f = 1kHz
THD = 10%
L
Rg = 0
6
4
20
0
2
0
0
2
4
6
8
10 12 14
16 18
20 22 24
4
6
8
10
12
14
16
18
20
22
Supply voltage, V
CC
– V
Supply voltage, V – V
CC
THD – P
THD – f
O
100
100
7
5
7
5
V
R
= 18V
V
R
= 18V
CC
= 8Ω
CC
= 8Ω
L
L
3
2
3
2
Rg = 600Ω
Rg = 600Ω
P
= 1W
O
10
7
5
10
7
5
3
2
3
2
1
7
5
1
7
5
10kHz
3
2
3
2
1kHz
0.1
7
5
0.1
7
5
100Hz
3
2
3
2
0.01
0.1
0.01
2
3
5
7
1
2
3
5
7
2
3
5 7
2
3
5 7
2
3
5 7
10k
2
3
5 7
100k
10
10
100
1k
Output power, P – W
O
Response – f
Frequency, f – Hz
CH Sep. – f
2
0
V
= 18V
CC
R
= 8Ω
L
0
2
V
= 0dBm
–
–
–
10
20
30
O
Rg = 10kΩ
–
–
4
–
–
6
8
–
–
40
50
–
–
10
12
V
R
= 18V
CC
= 8Ω
–
–
60
70
L
–
–
14
16
Rg = 600Ω
V
= 0dBm (at f = 1kHz)
O
2
3
5 7
2
3
5 7
2
3
5 7
2
3
5 7
100k
2
3
5 7
2
3
5 7
2
3
5 7
10k
2
3
5 7
100k
10
100
1k
10k
10
100
1k
Frequency, f – Hz
Frequency, f – Hz
SVRR – V
CC
V
– Rg
NO
0.3
0.2
0
R
= 8Ω
V
= 18V
L
CC
Rg = 0Ω
R
= 8Ω
L
–
10
fr = 100Hz
V
CV
DIN AUDIO
R = 0dBm
CC
= 1μF
–
–
–
–
–
20
30
40
50
60
CC
0.1
–
–
70
80
0
100
2
3
5
7
2
3
5
7
2
3
5
7
100k
4
6
8
10
12
14
16
18
20
22
24
1k
10k
Supply voltage, V
– V
Resistance for signal generation, Rg – Ω
CC
No.A0314-6/7
LA42052
SVRR – fr
SVRR – V R
CC
0
10
20
0
V
= 18V
V
= 18V
CC
= 8Ω
CC
R
R = 8Ω
L
L
–
–
–
–
–
–
–
10
Rg = 0Ω
Rg = 0Ω
V
R = 0dBm
fr = 100Hz
CC
CV
= 1μF
CV
= 1μF
–
–
–
–
–
20
30
40
50
60
CC
CC
SVRR = 20log (V /V R)
O
CC
30
40
50
60
–
–
–
–
70
80
70
80
2
3
5
7
2
3
5
7
2
3
5
7
10k
0
0.2 0.4 0.6 0.8
1
1.2 1.4 1.6 1.8
2
2.2
10
100
1k
Ripple frequency, fr – Hz
Power supply ripple voltage, V R – Vrms
CC
Pd – P
O
8
7
6
5
4
3
2
R
= 8Ω
L
Rg = 600Ω
f = 1kHz
1
0
2
3
5
7
1
2
3
5
7
0.1
10
Output power, P – W
O
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using
products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd.
products described or contained herein.
SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all
semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or
malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise
to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt
safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not
limited to protective circuits and error prevention circuits for safe design, redundant design, and structural
design.
In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are
controlled under any of applicable local export control laws and regulations, such products may require the
export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise,
without the prior written consent of SANYO Semiconductor Co.,Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
SANYO Semiconductor Co.,Ltd. product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed
for volume production.
Upon using the technical information or products described herein, neither warranty nor license shall be granted
with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third
party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's
intellctual property rights which has resulted from the use of the technical information and products mentioned
above.
This catalog provides information as of May, 2008. Specifications and information herein are subject
to change without notice.
PS No.A0314-7/7
相关型号:
©2020 ICPDF网 联系我们和版权申明