MC100E167FNR2 [ONSEMI]
5V ECL 6-Bit 2:1 MUX-Register; 5V ECL 6位2 ： 1多路复用器寄存器
| 型号： | MC100E167FNR2 |
| 厂家： | 
ONSEMI |
| 描述： | 5V ECL 6-Bit 2:1 MUX-Register |
| 文件： | 总8页 (文件大小：129K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MC10E167, MC100E167
5VꢀECL 6-Bit 2:1
MUX-Register
Description
The MC10E/100E167 contains six 2:1 multiplexers followed by D
flip-flops with single-ended outputs. Input data are selected by the
Select control, SEL. The selected data are transferred to the flip-flop
outputs by a positive edge on CLK1 or CLK2 (or both). A HIGH on
the Master Reset (MR) pin asynchronously forces all Q outputs LOW.
http://onsemi.com
Features
The 100 Series contains temperature compensation.
• 1000 MHz Min. Operating Frequency
• 800 ps Max. Clock to Output
• Single-Ended Outputs
• Asynchronous Master Resets
• Dual Clocks
PLCC−28
FN SUFFIX
CASE 776
• PECL Mode Operating Range: V = 4.2 V to 5.7 V
CC
with V = 0 V
EE
MARKING DIAGRAM*
• NECL Mode Operating Range: V = 0 V
CC
1
with V = −4.2 V to −5.7 V
EE
• Internal Input 50 kW Pulldown Resistors
• ESD Protection: Human Body Model; > 2 kV,
MCxxxE167FNG
AWLYYWW
Machine Model; > 200 V
Charged Device Model; > 2 kV
• Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test
• Moisture Sensitivity Level:
Pb = 1
Pb−Free = 3
xxx
A
WL
YY
WW
G
= 10 or 100
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb−Free Package
For Additional Information, see Application Note AND8003/D
• Flammability Rating: UL 94 V−0 @ 0.125 in,
Oxygen Index: 28 to 34
• Transistor Count = 323 devices
• Pb−Free Packages are Available*
*For additional marking information, refer to
Application Note AND8002/D.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 6 of this data sheet.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
©
Semiconductor Components Industries, LLC, 2006
1
Publication Order Number:
November, 2006 − Rev. 8
MC10E167/D
MC10E167, MC100E167
D a
Q
Q
Q
Q
Q
Q
Q
0
0
1
2
3
MUX
SEL
D
D
D
D a D b D a D b D a NC
V
CCO
5
4
4
3
3
R
R
D b
0
25
24
23
22
21
20
19
18
17
16
15
14
13
D a
1
Q
Q
V
26
D b
5
5
4
MUX
SEL
D b
1
27
28
CLK1
CLK2
D a
2
MUX
SEL
CC
R
D b
2
Pinout: 28-Lead PLCC
1
2
Q
V
3
2
EE
(Top View)
D a
3
Q
MUX
SEL
D
D
D
Q
V
MR
R
R
R
D b
3
3
D a
4
SEL
Q
Q
Q
Q
CCO
4
5
MUX
SEL
D b
4
4
D a
0
12
Q
1
D a
5
MUX
SEL
5
6
7
8
9
10
11
D b
5
D b
0
D a D b D a D b
V
Q
0
1
1
2
2
CCO
SEL
* All V and V
pins are tied together on the die.
CC
CCO
CLK1
CLK2
Warning: All V , V
, and V pins must be externally
CCO EE
CC
connected to Power Supply to guarantee proper operation.
MR
Figure 2. Logic Diagram
Figure 1. 28−Lead Pinout Assignment
Table 1. PIN DESCRIPTION
PIN
FUNCTION
D a − D a
ECL Input Data a
ECL Input Data b
ECL Select Input
ECL Clock Inputs
ECL Master Reset
ECL Data Outputs
Positive Supply
Negative Supply
No Connect
0
5
D b − D b
0
5
SEL
CLK1, CLK2
MR
Q − Q
0
5
V
V
, V
CCO
CC
EE
NC
Table 2. FUNCTION TABLE
SEL
Data
H
L
a
b
http://onsemi.com
2
MC10E167, MC100E167
Table 3. MAXIMUM RATINGS
Symbol
Parameter
Condition 1
= 0 V
Condition 2
Rating
Unit
V
V
V
V
PECL Mode Power Supply
NECL Mode Power Supply
V
V
8
CC
EE
I
EE
CC
= 0 V
−8
V
PECL Mode Input Voltage
NECL Mode Input Voltage
V
V
= 0 V
= 0 V
V v V
6
−6
V
V
EE
CC
I
CC
V w V
I
EE
I
Output Current
Continuous
Surge
50
100
mA
mA
out
T
Operating Temperature Range
0 to +85
°C
°C
A
T
Storage Temperature Range
−65 to +150
stg
JA
q
Thermal Resistance (Junction−to−Ambient)
0 lfpm
500 lfpm
PLCC−28
PLCC−28
63.5
43.5
°C/W
°C/W
q
Thermal Resistance (Junction−to−Case)
Standard Board
PLCC−28
22 to 26
°C/W
JC
V
PECL Operating Range
NECL Operating Range
4.2 to 5.7
−5.7 to −4.2
V
V
EE
T
sol
Wave Solder
Pb
Pb−Free
265
265
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
http://onsemi.com
3
MC10E167, MC100E167
Table 4. 10E SERIES PECL DC CHARACTERISTICS V
= 5.0 V, V = 0.0 V (Note 1)
EE
CCx
0°C
25°C
85°C
Min
Typ
94
Max
113
Min
Typ
94
Max
113
Min
Typ
94
Max
113
Symbol
Characteristic
Power Supply Current
Unit
mA
mV
mV
mV
mV
mA
I
EE
V
V
V
V
Output HIGH Voltage (Note 2)
Output LOW Voltage (Note 2)
Input HIGH Voltage
3980
3050
3830
3050
4070
3210
3995
3285
4160
3370
4160
3520
150
4020
3050
3870
3050
4105
3210
4030
3285
4190
3370
4190
3520
150
4090
3050
3940
3050
4185
3227
4110
3302
4280
3405
4280
3555
150
OH
OL
IH
Input LOW Voltage
IL
I
I
Input HIGH Current
IH
IL
Input LOW Current
0.5
0.3
0.5
0.25
0.3
0.2
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
1. Input and output parameters vary 1:1 with V . V can vary −0.46 V / +0.06 V.
CC
EE
2. Outputs are terminated through a 50 W resistor to V − 2.0 V.
CC
Table 5. 10E SERIES NECL DC CHARACTERISTICS V
= 0.0 V; V = −5.0 V (Note 3)
CCx
EE
0°C
Typ
94
25°C
85°C
Typ
94
Min
Max
113
Min
Typ
94
Max
113
Min
Max
113
Symbol
Characteristic
Power Supply Current
Unit
mA
mV
mV
mV
mV
mA
I
EE
V
V
V
V
Output HIGH Voltage (Note 4)
Output LOW Voltage (Note 4)
Input HIGH Voltage
−1020 −930
−840
−980
−895
−810
−910
−815
−720
OH
OL
IH
−1950 −1790 −1630 −1950 −1790 −1630 −1950 −1773 −1595
−1170 −1005 −840 −1130 −970 −810 −1060 −890 −720
−1950 −1715 −1480 −1950 −1715 −1480 −1950 −1698 −1445
150 150 150
Input LOW Voltage
IL
I
I
Input HIGH Current
IH
IL
Input LOW Current
0.5
0.3
0.5
0.065
0.3
0.2
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
3. Input and output parameters vary 1:1 with V . V can vary −0.46 V / +0.06 V.
CC
EE
4. Outputs are terminated through a 50 W resistor to V − 2.0 V.
CC
Table 6. 100E SERIES PECL DC CHARACTERISTICS V
= 5.0 V; V = 0.0 V (Note 5)
CCx
EE
0°C
25°C
85°C
Min
Typ
94
Max
113
Min
Typ
94
Max
113
Min
Typ
108
Max
130
Symbol
Characteristic
Power Supply Current
Unit
mA
mV
mV
mV
mV
mA
I
EE
V
V
V
V
Output HIGH Voltage (Note 6)
Output LOW Voltage (Note 6)
Input HIGH Voltage
3975
3190
3835
3190
4050
3295
3975
3355
4120
3380
4120
3525
150
3975
3190
3835
3190
4050
3255
3975
3355
4120
3380
4120
3525
150
3975
3190
3835
3190
4050
3260
3975
3355
4120
3380
4120
3525
150
OH
OL
IH
Input LOW Voltage
IL
I
I
Input HIGH Current
IH
IL
Input LOW Current
0.5
0.3
0.5
0.25
0.5
0.2
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
5. Input and output parameters vary 1:1 with V . V can vary −0.46 V / +0.8 V.
CC
EE
6. Outputs are terminated through a 50 W resistor to V − 2.0 V.
CC
http://onsemi.com
4
MC10E167, MC100E167
Table 7. 100E SERIES NECL DC CHARACTERISTICS V
= 0 V; V = −5.0 V (Note 7)
EE
CCx
0°C
Typ
94
−1025 −950
25°C
Typ
94
85°C
Typ
108
Min
Max
Min
Max
Min
Max
130
Symbol
Characteristic
Power Supply Current
Unit
mA
mV
I
113
113
EE
V
V
V
V
Output HIGH Voltage (Note 8)
Output LOW Voltage (Note 8)
Input HIGH Voltage
−880 −1025 −950
−880 −1025 −950
−880
OH
OL
IH
−1810 −1705 −1620 −1810 −1745 −1620 −1810 −1740 −1620 mV
−1165 −1025 −880 −1165 −1025 −880 −1165 −1025 −880 mV
−1810 −1645 −1475 −1810 −1645 −1475 −1810 −1645 −1475 mV
Input LOW Voltage
IL
I
I
Input HIGH Current
150
150
150
mA
mA
IH
IL
Input LOW Current
0.5
0.3
0.5
0.25
0.5
0.2
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
7. Input and output parameters vary 1:1 with V . V can vary −0.46 V / +0.8 V.
CC
EE
8. Outputs are terminated through a 50 W resistor to V − 2.0 V.
CC
Table 8. AC CHARACTERISTICS V
= 5.0 V; V = 0.0 V or V
= 0.0 V; V = −5.0 V (Note 9)
CCx
EE
CCx
EE
0°C
25°C
85°C
Typ
Min
Typ
Max
Min
Typ
Max
Min
Max
Symbol
Characteristic
Unit
MHz
ps
f
Maximum Toggle Frequency
1000
1400
1000
1400
1000
1400
MAX
t
t
Propagation Delay to Output
Setup Time
PLH
PHL
Clk, MR
650
850
1050
650
850
1050
650
850
1050
t
ps
ps
s
D
100
275
− 50
100
275
− 50
100
275
− 50
SEL
125
125
125
t
Hold Time
h
D
300
75
50
300
75
50
300
75
50
SEL
−125
550
−125
550
−125
550
t
t
Reset Recovery Time
Minimum Pulse Width
750
750
750
ps
ps
RR
PW
Clk, MR
400
400
400
t
t
Within-Device Skew (Note 10)
Random Clock Jitter (RMS)
Rise/Fall Times
75
75
75
ps
ps
ps
SKEW
< 1
< 1
< 1
JITTER
t
t
r
f
(20 - 80%)
300
450
800
300
450
800
300
450
800
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
9. 10 Series: V can vary −0.46 V / +0.06 V.
EE
100 Series: V can vary −0.46 V / +0.8 V.
EE
10.Within-device skew is defined as identical transitions on similar paths through a device.
http://onsemi.com
5
MC10E167, MC100E167
Z = 50 W
Q
Q
D
D
o
Receiver
Device
Driver
Device
Z = 50 W
o
50 W
50 W
V
TT
V
= V − 2.0 V
TT
CC
Figure 3. Typical Termination for Output Driver and Device Evaluation
(See Application Note AND8020/D − Termination of ECL Logic Devices.)
ORDERING INFORMATION
†
Device
Package
Shipping
MC10E167FN
PLCC−28
37 Units / Rail
37 Units / Rail
MC10E167FNG
PLCC−28
(Pb−Free)
MC10E167FNR2
PLCC−28
500 / Tape & Reel
500 / Tape & Reel
MC10E167FNR2G
PLCC−28
(Pb−Free)
MC100E167FN
PLCC−28
PLCC−28
37 Units / Rail
MC100E167FNR2
500 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
Resource Reference of Application Notes
AN1405/D
AN1406/D
AN1503/D
AN1504/D
AN1568/D
AN1672/D
AND8001/D
AND8002/D
AND8020/D
AND8066/D
AND8090/D
−
−
−
−
−
−
−
−
−
−
−
ECL Clock Distribution Techniques
Designing with PECL (ECL at +5.0 V)
ECLinPSt I/O SPiCE Modeling Kit
Metastability and the ECLinPS Family
Interfacing Between LVDS and ECL
The ECL Translator Guide
Odd Number Counters Design
Marking and Date Codes
Termination of ECL Logic Devices
Interfacing with ECLinPS
AC Characteristics of ECL Devices
http://onsemi.com
6
MC10E167, MC100E167
PACKAGE DIMENSIONS
PLCC−28
FN SUFFIX
PLASTIC PLCC PACKAGE
CASE 776−02
ISSUE E
M
S
S
N
0.007 (0.180)
T L−M
B
Y BRK
D
−N−
M
S
S
N
0.007 (0.180)
T L−M
U
Z
−M−
−L−
W
D
S
S
S
N
0.010 (0.250)
T L−M
X
G1
V
28
1
VIEW D−D
M
S
S
S
A
0.007 (0.180)
0.007 (0.180)
T L−M
T L−M
N
M
S
S
N
0.007 (0.180)
T L−M
H
Z
M
S
N
R
K1
C
E
0.004 (0.100)
G
K
SEATING
PLANE
−T−
J
M
S
S
N
0.007 (0.180)
T L−M
F
VIEW S
G1
S
S
S
N
0.010 (0.250)
T L−M
VIEW S
NOTES:
INCHES
MILLIMETERS
1. DATUMS −L−, −M−, AND −N− DETERMINED
WHERE TOP OF LEAD SHOULDER EXITS
PLASTIC BODY AT MOLD PARTING LINE.
2. DIMENSION G1, TRUE POSITION TO BE
MEASURED AT DATUM −T−, SEATING PLANE.
3. DIMENSIONS R AND U DO NOT INCLUDE
MOLD FLASH. ALLOWABLE MOLD FLASH IS
0.010 (0.250) PER SIDE.
4. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
5. CONTROLLING DIMENSION: INCH.
6. THE PACKAGE TOP MAY BE SMALLER THAN
THE PACKAGE BOTTOM BY UP TO 0.012
(0.300). DIMENSIONS R AND U ARE
DETERMINED AT THE OUTERMOST
EXTREMES OF THE PLASTIC BODY
EXCLUSIVE OF MOLD FLASH, TIE BAR
BURRS, GATE BURRS AND INTERLEAD
FLASH, BUT INCLUDING ANY MISMATCH
BETWEEN THE TOP AND BOTTOM OF THE
PLASTIC BODY.
DIM MIN
MAX
0.495
0.495
0.180
0.110
0.019
MIN
12.32
12.32
4.20
MAX
12.57
12.57
4.57
A
B
C
E
F
0.485
0.485
0.165
0.090
0.013
2.29
0.33
2.79
0.48
G
H
J
0.050 BSC
1.27 BSC
0.026
0.020
0.025
0.450
0.450
0.042
0.042
0.042
0.032
−−−
−−−
0.66
0.51
0.64
11.43
11.43
1.07
1.07
1.07
−−−
0.81
−−−
K
R
U
V
W
X
Y
Z
−−−
0.456
0.456
0.048
0.048
0.056
11.58
11.58
1.21
1.21
1.42
0.50
10
−−− 0.020
10
2
2
_
_
_
_
G1 0.410
K1 0.040
0.430
−−−
10.42
1.02
10.92
−−−
7. DIMENSION H DOES NOT INCLUDE DAMBAR
PROTRUSION OR INTRUSION. THE DAMBAR
PROTRUSION(S) SHALL NOT CAUSE THE H
DIMENSION TO BE GREATER THAN 0.037
(0.940). THE DAMBAR INTRUSION(S) SHALL
NOT CAUSE THE H DIMENSION TO BE
SMALLER THAN 0.025 (0.635).
http://onsemi.com
7
MC10E167, MC100E167
ECLinPS is a trademark of Semiconductor Components Industries, LLC (SCILLC).
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
For additional information, please contact your local
Sales Representative
MC10E167/D
相关型号：
MC100E167FNR2G
100E SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, TRUE OUTPUT, PQCC28, LEAD FREE, PLASTIC, LCC-28
ONSEMI
©2020 ICPDF网 联系我们和版权申明