MM74HCT573WM [ONSEMI]
八路 D 型锁存;型号: | MM74HCT573WM |
厂家: | ONSEMI |
描述: | 八路 D 型锁存 PC 驱动 光电二极管 逻辑集成电路 |
文件: | 总11页 (文件大小:302K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DATA SHEET
www.onsemi.com
Octal D-Type Latch /
3-STATE Octal D-Type Flip-Flop
SOIC−20 WB
CASE 751D−05
MM74HCT573/MM74HCT574
General Description
The MM74HCT573 octal D−type latches and MM74HCT574 octal
D−type flip−flop advanced silicon−gate CMOS technology, which
provides the inherent benefits of low power consumption and wide
power supply range, but are LS−TTL input and output characteristic
and pin−out compatible. The 3−STATE outputs are capable of driving
15 LS−TTL loads. All inputs are protected from damage due to static
TSSOP20, 4.4x6.5
CASE 948AQ
discharge by internal diodes to V and ground.
CC
When the MM74HCT573 Latch Enable input is HIGH, the
Q outputs will follow the D inputs. When the Latch Enable goes LOW,
data at the D inputs will be retained at the outputs until Latch Enable
returns HIGH again. When a high logic level is applied to the Output
Control input, all outputs go to a high impedance state, regardless
of what signals are present at the other inputs and the state of the
storage elements.
TSSOP−20 WB
CASE 948E
MARKING DIAGRAMS
20
The MM74HCT574 are positive edge triggered flip−flops. Data
at the D inputs, meeting the setup and hold time requirements, are
transferred to the Q outputs on positive going transitions of the Clock
(CK) input. When a high logic level is applied to the Output Control
(OC) input, all outputs go to a high impedance state, regardless
of what signals are present at the other inputs and the state of
the storage elements.
HCT57xA
AWLYYWW
1
SOIC−20
The MM74HCT devices are intended to interface between TTL
and NMOS components and standard CMOS devices. These parts are
also plug in replacements for LS−TTL devices and can be used
to reduce power consumption in existing designs.
20
HCT
57xA
ALYW
Features
1
• TTL Input Characteristic Compatible
• Typical Propagation Delay: 17 ns
• Low Input Current: 1 mA Maximum
• Low Quiescent Current: 160 mA Maximum
• Compatible with Bus−oriented Systems
• Output Drive Capability: 15 LS−TTL Loads
• These are Pb−Free Devices
TSSOP−20 WB
HCT57xA = Specific Device Code
x = 3 or 4
A
= Assembly Location
= Wafer Lot
= Year
WL, L
YY, Y
WW, W
= Work Week
ORDERING INFORMATION
See detailed ordering and shipping information on page 7 of
this data sheet.
© Semiconductor Components Industries, LLC, 1990
1
Publication Order Number:
December, 2022 − Rev. 2
MM74HCT573/D
MM74HCT573/MM74HCT574
Connection Diagrams
MM74HCT573
(Top View)
MM74HCT574
(Top View)
Figure 1. Pin Assignments for SOIC and TSSOP
Truth Tables
MM74HCT573
MM74HCT574
Output Control
LE
H
H
L
Data
H
373 Output
Output Control
Clock
Data
H
374 Output
L
L
H
L
L
L
↑
↑
L
H
L
L
L
L
X
Q
L
X
Q
0
0
H
X
X
Z
H
X
X
Z
NOTES: H = HIGH Level
NOTES: H = HIGH Level
L
= LOW Level
L
= LOW Level
Q
= Level of output before steady−state input
conditions were established.
= High Impedance State
Q
= The level of the output before steady state input
conditions were established.
= Don’t Care
= High Impedance State
= Transition from LOW−to−HIGH
0
0
Z
X
Z
↑
www.onsemi.com
2
MM74HCT573/MM74HCT574
ABSOLUTE MAXIMUM RATINGS (Note 1)
Symbol
Parameter
Rating
V
CC
Supply Voltage
–0.5 to +7.0 V
V
IN
DC Input Voltage
–0.5 to V + 0.5 V
CC
V
DC Output Voltage
Clamp Diode Current
DC Output Current, per Pin
–0.5 to V + 0.5 V
OUT
CC
I , I
IK OK
20 mA
35 mA
I
OUT
I
DC V or GND Current, per Pin
70 mA
CC
CC
T
Storage Temperature Range
Power Dissipation
–65°C to +150°C
500 mW
STG
P
S.O. Package only
D
T
L
Lead Temperature (Soldering 10 Seconds)
260°C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. Unless otherwise specified all voltages are referenced to ground.
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
Min
4.5
0
Max
Unit
V
V
CC
Supply Voltage
5.5
V , V
IN OUT
DC Input or Output Voltage
Operating Temperature Range
Input Rise or Fall Times
V
CC
V
T
A
–55
+125
500
°C
ns
t , t
r
f
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond
the Recommended Operating Ranges limits may affect device reliability.
www.onsemi.com
3
MM74HCT573/MM74HCT574
DC ELECTRICAL CHARACTERISTICS (V = 5 V 10%, unless otherwise specified)
CC
T
= −40°C
T = −55°C
A
to 125°C
A
to 85°C
T
A
= 25°C
Typ
Guaranteed Limits
Symbol
Parameter
Conditions
Unit
V
Minimum HIGH Level Input
Voltage
−
2.0
0.8
− 0.1
2.0
2.0
0.8
V
IH
V
Maximum LOW Level Input
Voltage
−
0.8
V
V
IL
V
OH
Minimum HIGH Level Output
Voltage
V
= V or V
| = 20 mA
V
CC
V
CC
V
− 0.1
V
− 0.1
IN
IH
IL
CC
CC
|I
OUT
V
= V or V
| = 6.0 mA, V = 4.5 V
CC
4.2
5.7
0
3.98
4.98
0.1
3.84
3.7
V
V
IN
IH
IL
|I
OUT
V
IN
= V or V
IL
4.84
0.1
4.7
0.1
0.4
0.4
1.0
10
IH
|I
OUT
| = 7.2 mA, V = 5.5 V
CC
V
OL
Maximum LOW Level Voltage
V
IN
= V or V
V
IH
IL
|I
OUT
| = 20 mA
V
IN
= V or V
0.2
0.2
−
0.26
0.26
0.1
0.33
0.33
1.0
V
IH
IL
|I
OUT
| = 6.0 mA, V = 4.5 V
CC
V
IN
= V or V
IL
V
IH
|I
OUT
| = 7.2 mA, V = 5.5 V
CC
I
IN
Maximum Input Current
V
V
= V or GND,
mA
mA
mA
mA
IN
CC
or V
IH
IL
I
I
Maximum 3−STATE
V
OUT
= V or GND,
−
0.5
5.0
OZ
CC
Output Leakage Current
Enable = V or V
IH
IL
Maximum Quiescent Supply
Current
V
IN
= V or GND,
−
8.0
80
160
2.0
CC
CC
I
= 0 mA
OUT
V
IN
= 2.4 V or 0.5 V
−
1.5
1.8
(Note 2)
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
2. Measured per pin. All others tied to V or ground.
CC
www.onsemi.com
4
MM74HCT573/MM74HCT574
AC ELECTRICAL CHARACTERISTICS
(MM74HCT573: V = 5.0 V, T = 25°C, t = t = 6 ns, unless otherwise specified)
CC
A
r
f
Symbol
, t
Parameter
Conditions
C = 45 pF
Typ
Guaranteed Limit
Unit
t
t
Maximum Propagation Delay
Data to Output
17
27
ns
PHL PLH
L
, t
Maximum Propagation Delay
Latch Enable to Output
C = 45 pF
L
16
21
14
27
30
23
ns
ns
ns
PHL PLH
t
t
, t
Maximum Enable Propagation Delay
Control to Output
C = 45 pF
L
PZH PZL
R = 1 kW
L
, t
Maximum Disable Propagation Delay
Control to Output
C = 5 pF
L
PHZ PLZ
R = 1 kW
L
t
Minimum Clock Pulse Width
−
−
−
15
5
ns
ns
ns
W
t
Minimum Setup Time Data to Clock
Minimum Hold Time Clock to Data
S
t
12
H
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
AC ELECTRICAL CHARACTERISTICS
(MM74HCT573: V = 5.0 V 10%, t = t = 6 ns, unless otherwise specified)
CC
r
f
T
= −40°C
T = −55°C
A
to 125°C
A
to 85°C
T
A
= 25°C
Typ
Guaranteed Limits
Symbol
, t
Parameter
Conditions
C = 50 pF
Unit
t
t
Maximum Propagation Delay
Data to Output
18
30
30
30
30
38
45
53
45
45
ns
PHL PLH
L
, t
Maximum Propagation Delay
Latch Enable to Output
C = 50 pF
L
17
22
15
44
38
38
ns
ns
ns
PHL PLH
t
, t
Maximum Enable Propagation Delay
Control to Output
C = 50 pF
L
PZH PZL
R = 1 kW
L
t
, t
Maximum Disable Propagation Delay
Control to Output
C = 50 pF
L
PHZ PLZ
R = 1 kW
L
t
, t
Maximum Output Rise and Fall Time
Minimum Clock Pulse Width
C = 50 pF
6
−
3
4
−
−
−
−
12
15
5
15
20
6
18
24
8
ns
ns
ns
ns
pF
pF
pF
pF
THL TLH
L
t
W
t
S
Minimum Setup Time Data to Clock
Minimum Hold Time Clock to Data
Maximum Input Capacitance
t
H
12
10
20
5
15
10
20
−
18
10
20
−
C
IN
C
Maximum Output Capacitance
OUT
C
PD
Power Dissipation Capacitance (Note 3)
OC = V
CC
OC = GND
52
−
−
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
2
3. C determines the no load dynamic power consumption, P = C
V
f + I
V
, and the no load dynamic current consumption,
PD
D
PD CC
CC CC
2
I
= C
V
f + I
.
S
PD CC
CC
www.onsemi.com
5
MM74HCT573/MM74HCT574
AC ELECTRICAL CHARACTERISTICS
(MM74HCT574: V = 5.0 V, T = 25°C, t = t = 6 ns)
CC
A
r
f
Symbol
Parameter
Conditions
Typ
60
Guaranteed Limit
Unit
MHz
ns
f
Maximum Clock Frequency
33
27
28
MAX
t
, t
Maximum Propagation Delay to Output
C = 45 pF
17
PHL PLH
L
t
, t
Maximum Enable Propagation Delay
Control to Output
C = 45 pF
R = 1 kW
19
ns
PZH PZL
L
L
t
, t
Maximum Disable Propagation Delay
Control to Output
C = 45 pF
L
14
25
ns
PHZ PLZ
L
R = 1 kW
t
Minimum Clock Pulse Width
−
−
−
15
12
5
ns
ns
ns
W
t
Minimum Setup Time Data to Clock
Minimum Hold Time Clock to Data
S
H
t
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
AC ELECTRICAL CHARACTERISTICS
(MM74HCT574: V = 5.0 V 10%, t = t = 6 ns, unless otherwise specified)
CC
r
f
T
= −40°C
T = −55°C
A
to 125°C
A
to 85°C
T
A
= 25°C
Typ
−
Guaranteed Limits
Symbol
Parameter
Conditions
Unit
MHz
ns
f
Maximum Clock Frequency
33
30
30
28
38
38
23
45
45
MAX
t
, t
Maximum Propagation Delay Clock to Output
C = 50 pF
18
22
PHL PLH
L
t
, t
Maximum Enable Propagation Delay
Control to Output
C = 50 pF
R = 1 kW
ns
PZH PZL
L
L
t
, t
Maximum Disable Propagation Delay
Control to Output
C = 50 pF
L
15
30
38
45
ns
PHZ PLZ
L
R = 1 kW
t
, t
Maximum Output Rise and Fall Time
Minimum Clock Pulse Width
C = 50 pF
6
−
12
15
12
5
15
20
15
6
18
24
18
8
ns
ns
ns
ns
pF
pF
pF
pF
THL TLH
L
t
W
t
S
Minimum Setup Time Data to Clock
Minimum Hold Time Clock to Data
Maximum Input Capacitance
6
t
H
1
C
IN
−
10
20
−
10
20
−
10
20
−
C
Maximum Output Capacitance
−
OUT
C
PD
Power Dissipation Capacitance (Note 4)
OC = V
5
CC
OC = GND
58
−
−
−
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
2
4. C determines the no load dynamic power consumption, P = C
V
f + I
V
, and the no load dynamic current consumption,
PD
D
PD CC
CC CC
2
I
= C
V
f + I
.
S
PD CC
CC
www.onsemi.com
6
MM74HCT573/MM74HCT574
ORDERING INFORMATION
Part Number
†
Package
Shipping
MM74HCT573WMX
SOIC−20 WB, Case 751D−05
(Pb−Free and Halide−Free)
1000 Units / Tape & Reel
MM74HCT573MTC
MM74HCT573MTCX
MM74HCT574WM
MM74HCT574WMX
MM74HCT574MTC
TSSOP−20 WB, Case 948E
(Pb−Free)
75 Units / Tube
2500 Units / Tape & Reel
38 Units / Tube
SOIC−20 WB, Case 751D−05
(Pb−Free and Halide−Free)
1000 Units / Tape & Reel
75 Units / Tube
TSSOP−20 WB, Case 948E
(Pb−Free)
MM74HCT574MTCX
TSSOP20, Case 948AQ−01
(Pb−Free)
2500 Units / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
www.onsemi.com
7
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
SOIC−20 WB
CASE 751D−05
ISSUE H
DATE 22 APR 2015
SCALE 1:1
D
A
q
NOTES:
1. DIMENSIONS ARE IN MILLIMETERS.
2. INTERPRET DIMENSIONS AND TOLERANCES
PER ASME Y14.5M, 1994.
20
11
3. DIMENSIONS D AND E DO NOT INCLUDE MOLD
PROTRUSION.
E
B
4. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE.
5. DIMENSION B DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE PROTRUSION
SHALL BE 0.13 TOTAL IN EXCESS OF B
DIMENSION AT MAXIMUM MATERIAL
CONDITION.
1
10
MILLIMETERS
DIM MIN
MAX
2.65
0.25
0.49
0.32
12.95
7.60
20X b
A
A1
b
2.35
0.10
0.35
0.23
12.65
7.40
M
S
S
B
T
0.25
A
c
D
E
e
A
1.27 BSC
H
h
10.05
0.25
0.50
0
10.55
0.75
0.90
7
SEATING
PLANE
L
18X e
q
_
_
A1
c
T
GENERIC
MARKING DIAGRAM*
RECOMMENDED
20
SOLDERING FOOTPRINT*
20X
20X
0.52
1.30
XXXXXXXXXXX
XXXXXXXXXXX
AWLYYWWG
20
11
10
1
XXXXX = Specific Device Code
11.00
A
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb−Free Package
1
WL
YY
WW
G
1.27
PITCH
DIMENSIONS: MILLIMETERS
*This information is generic. Please refer to
device data sheet for actual part marking.
Pb−Free indicator, “G” or microdot “G”, may
or may not be present. Some products may
not follow the Generic Marking.
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
DOCUMENT NUMBER:
DESCRIPTION:
98ASB42343B
SOIC−20 WB
PAGE 1 OF 1
onsemi and
are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves
the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation
special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
TSSOP−20 WB
CASE 948E
ISSUE D
DATE 17 FEB 2016
SCALE 2:1
NOTES:
20X K REF
1. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
K
K1
M
S
S
0.10 (0.004)
T U
V
S
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION A DOES NOT INCLUDE MOLD
FLASH, PROTRUSIONS OR GATE BURRS.
MOLD FLASH OR GATE BURRS SHALL NOT
EXCEED 0.15 (0.006) PER SIDE.
0.15 (0.006) T U
J J1
20
11
2X L/2
4. DIMENSION B DOES NOT INCLUDE
INTERLEAD FLASH OR PROTRUSION.
INTERLEAD FLASH OR PROTRUSION
SHALL NOT EXCEED 0.25 (0.010) PER SIDE.
5. DIMENSION K DOES NOT INCLUDE
DAMBAR PROTRUSION. ALLOWABLE
DAMBAR PROTRUSION SHALL BE 0.08
(0.003) TOTAL IN EXCESS OF THE K
DIMENSION AT MAXIMUM MATERIAL
CONDITION.
B
SECTION N−N
L
−U−
PIN 1
IDENT
0.25 (0.010)
N
1
10
6. TERMINAL NUMBERS ARE SHOWN FOR
REFERENCE ONLY.
7. DIMENSION A AND B ARE TO BE
DETERMINED AT DATUM PLANE −W−.
M
S
0.15 (0.006) T U
A
−V−
N
MILLIMETERS
INCHES
MIN
DIM MIN
MAX
6.60
4.50
1.20
0.15
0.75
MAX
0.260
0.177
0.047
0.006
0.030
F
A
B
6.40
4.30
---
0.252
0.169
---
DETAIL E
C
D
0.05
0.50
0.002
0.020
F
G
H
0.65 BSC
0.026 BSC
−W−
0.27
0.09
0.09
0.19
0.19
0.37
0.20
0.16
0.30
0.25
0.011
0.004
0.004
0.007
0.007
0.015
0.008
0.006
0.012
0.010
C
J
J1
K
G
D
H
K1
L
DETAIL E
6.40 BSC
0.252 BSC
0
0.100 (0.004)
−T− SEATING
M
0
8
8
_
_
_
_
PLANE
GENERIC
MARKING DIAGRAM*
SOLDERING FOOTPRINT
7.06
XXXX
XXXX
ALYWG
G
1
A
L
= Assembly Location
= Wafer Lot
Y
W
G
= Year
= Work Week
= Pb−Free Package
0.65
PITCH
(Note: Microdot may be in either location)
*This information is generic. Please refer to
device data sheet for actual part marking.
Pb−Free indicator, “G” or microdot “ G”,
may or may not be present.
01.36X6
16X
1.26
DIMENSIONS: MILLIMETERS
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
DOCUMENT NUMBER:
DESCRIPTION:
98ASH70169A
TSSOP−20 WB
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
TSSOP20, 4.4x6.5
CASE 948AQ−01
ISSUE A
DATE 19 MAR 2009
b
SYMBOL
MIN
NOM
MAX
A
A1
A2
b
1.20
0.15
1.05
0.30
0.20
6.60
6.50
4.50
0.05
0.80
0.19
0.09
6.40
6.30
4.30
E1
E
c
D
6.50
6.40
E
E1
e
4.40
0.65 BSC
0.60
L
0.45
0.75
L1
1.00 REF
0º
8º
θ
e
TOP VIEW
D
c
A2
A
θ1
L
A1
L1
SIDE VIEW
END VIEW
Notes:
(1) All dimensions are in millimeters. Angles in degrees.
(2) Complies with JEDEC MO-153.
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
DOCUMENT NUMBER:
DESCRIPTION:
98AON34453E
TSSOP20, 4.4X6.5
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
ADDITIONAL INFORMATION
TECHNICAL PUBLICATIONS:
Technical Library: www.onsemi.com/design/resources/technical−documentation
onsemi Website: www.onsemi.com
ONLINE SUPPORT: www.onsemi.com/support
For additional information, please contact your local Sales Representative at
www.onsemi.com/support/sales
相关型号:
MM74HCT573WMX
Bus Driver, HCT Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20, 0.300 INCH, MS-013, SOIC-20
FAIRCHILD
MM74HCT573WMX_NL
Bus Driver, HCT Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20, 0.300 INCH, MS-013, SOIC-20
FAIRCHILD
MM74HCT574MTCX
Bus Driver, HCT Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20, 4.40 MM, MO-153AC, TSSOP-20
ROCHESTER
©2020 ICPDF网 联系我们和版权申明