NC7SZ66L6X [ONSEMI]
低电压单 SPST 常开总线开关;型号: | NC7SZ66L6X |
厂家: | ONSEMI |
描述: | 低电压单 SPST 常开总线开关 开关 光电二极管 |
文件: | 总11页 (文件大小:674K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
September 2013
NC7SZ66
Low Voltage Single SPST Normally Open Bus Switch
Features
Description
The NC7SZ66 is a ultra high-speed (UHS) CMOS
compatible single-pole/single-throw (SPST) bus switch.
The LOW on resistance of the switch allows inputs to be
connected to outputs with minimal propagation delay
and without generating additional ground bounce noise.
The device is organized as a 1-bit switch with a switch
enable (OE) signal. When OE is HIGH, the switch is on
and port A is connected to port B. When OE is LOW, the
switch is open and a high-impedance state exists
between the two ports..
.
.
.
.
.
.
.
.
.
.
Broad VCC Operating Range: 1.65 V to 5.5 V
Rail-to-Rail Signal Handling
Power Down High-Impedance Inputs/Outputs
5 Ω Switch Connection between Two Ports
Minimal Propagation Delay through the Switch
Low ICC
Zero Bounce in Flow-Through Mode
Control Input Compatible with CMOS Input Levels
Ultra-Small MicroPak™ Packages
Space-Saving SOT23 and SC70 Packages
Ordering Information
Part Number
NC7SZ66M5X
NC7SZ66P5X
NC7SZ66L6X
Top Mark
Package
Packing Method
7Z66
Z66
EE
5-Lead SOT23, JEDEC MO-178 1.6 mm
5-Lead SC70, EIAJ SC-88a, 1.25 mm Wide
6-Lead, MicroPak™, 1x1 mm Wide
3000 Units on Tape & Reel
3000 Units on Tape & Reel
5000 Units on Tape & Reel
© 1996 Fairchild Semiconductor Corporation
NC7SZ66 • Rev. 1.0.5
www.fairchildsemi.com
Connection Diagrams
Figure 1. Logic Symbol
Pin Configurations
Figure 2. SC70 and SOT23 (Top View)
Figure 3. MicroPak™ (Top Through View)
Pin Definitions
Pin # SC70 / SOT23
Pin # MicroPak™
Name
A
Description
1
2
3
4
5
1
2
3
4
6
5
Bus A I/O
B
Bus B I/O
GND
OE
VCC
NC
Ground
Switch Enable Input
Supply Voltage
No Connect
Function Table
OE
L
B0
High Z-State
A0
Function
Disconnected
Connect
H
H = HIGH Logic Level
L = LOW Logic Level
© 1996 Fairchild Semiconductor Corporation
NC7SZ66 • Rev. 1.0.5
www.fairchildsemi.com
2
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Symbol
VCC
Parameter
Min.
-0.5
-0.5
-0.5
Max.
7.0
Unit
V
Supply Voltage
DC Switch Voltage(1)
VS
VCC to 0.5
7.0
V
VIN
DC Input Voltage
V
IIK
DC Input Diode Current
DC Output Sink Current
DC VCC or Ground Current
VIN < 0 V
-50
mA
mA
mA
°C
°C
°C
IOUT
128
ICC or IGND
TSTG
TJ
±100
+150
+150
+260
200
Storage Temperature Range
-65
Junction Temperature Under Bias
TL
Junction Lead Temperature (Soldering, 10 Seconds)
SOT-23
Power Dissipation at +85°C
SC70-5
PD
mW
V
150
Human Body Model, JEDEC:JESD22-A114
Charge Device Model: JEDEC:JESD22-C101
4000
1500
ESD
Note:
1. The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are
observed.
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to Absolute Maximum Ratings.
Symbol
VCC
Parameter
Supply Voltage Operating
Input Voltage
Conditions
Min.
Max.
5.50
5.5
Unit
V
1.65
0
VIN
V
VS
Switch Input Voltage
Output Voltage
0
VCC
VCC
10
V
VOUT
0
V
VCC=2.3 V - 3.6 V
0
tr, tf
Input Rise and Fall Times
VCC=4.5 V – 5.5 V
Switching I/O
0
5
ns/V
0
DC
+85
300
425
TA
Operating Temperature
Thermal Resistance
-40
°C
SOT-23
SC70-5
°C/W
θJA
Note:
2. Unused inputs must be held HIGH or LOW; they may not float.
© 1996 Fairchild Semiconductor Corporation
www.fairchildsemi.com
NC7SZ66 • Rev. 1.0.5
3
DC Electrical Characteristics
All typical values are at the specified VCC, and TA = 25°C.
TA=-40 to +85°C
TA=+25°C
Symbol Parameter
VCC
Conditions
Units
Min.
Typ.
Max. Min. Typ.
1.65 to
1.95
0.75 VCC
HIGH Level
VIH
V
Input Voltage
2.30 to
5.50
0.7 VCC
1.65 to
1.95
0.25 VCC
0.3 VCC
LOW Level
VIL
V
Input Voltage
2.30 to
5.50
Control Input
IIN
Leakage
Current
0 to 5.5
±0.05
±1.00
µA
µA
0 ≤ VIN ≤ 5.5 V
0 ≤ A, B ≤ VCC
Off Leakage
Current
1.65 to
5.50
IOFF
±0.05 ±10.00
VIN=0 V, IIN=30 mA
VIN=2.4 V, IIN=15 mA
VIN=4.5 V, IIN=30 mA
VIN=0 V, IIN=24 mA
VIN=3 V, IIN=24 mA
VIN=0 V, IIN=8 mA
VIN=2.3 V, IIN=8 mA
VIN=0 V, IIN=4 mA
VIN=1.8 V, IIN=4 mA
3
5
7
4.5
12
15
9
7
4
3.0
2.30
1.8
Switch On
RON
10
5
20
12
30
28
60
Ω
Resistance(3)
13
7
25
IA=-30 mA,
0 ≤ VBn ≤ VCC
5.0
3.3
2.5
1.8
6
IA=-24 mA,
0 ≤ VBn ≤ VCC
12
On
Rflat
Resistance
Ω
Flatness(3,4,5)
IA=-8mA,
0 ≤ VBn ≤ VCC
28
IA=-4 mA,
0 ≤ VBn ≤ VCC
125
Quiescent
Supply
Current
1.65 to
5.50
VIN= VCC or GND,
ICC
0.05
10.00
µA
I
OUT=0
Notes:
3. Measured by the voltage drop between pins A and B at the indicated current through the switch. On resistance is
determined by the lower of the voltages on the two (A or B) pins.
4. Parameter is characterized but not tested in production.
5. Flatness is defined as the difference between the maximum and minimum value of on resistance over the
specified range of conditions.
© 1996 Fairchild Semiconductor Corporation
NC7SZ66 • Rev. 1.0.5
www.fairchildsemi.com
4
AC Electrical Characteristics
All typical values are at the specified VCC, and TA = 25°C.
TA=-40 to +85°C,
CL=50Pf.
RU=RD=500 Ω
Symbol
Parameter
VCC
Conditions
Units
ns
Figure
Min.
Typ.
Max.
1.65 to 1.95
2.3 to 2.7
3.0 to 3.6
4.5 to 5.5
1.65 to 1.95
2.3 to 2.7
3.0 to 3.6
4.5 to 5.5
1.65 to 1.95
2.3 to 2.7
3.0 to 3.6
4.5 to 5.5
4.3
1.2
0.8
0.3
14.2
7.0
5.5
4.5
18.2
9.0
7.0
5.0
Propagation Delay
Bus-to-Bus(6)
Figure 5
Figure 6
tPHL, tPLH
VIN=0PEN
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
7.0
3.3
2.4
2.0
9.2
5.3
4.0
2.7
VIN=2 x VCC for tPZL
VIN=0 V for tPZH
,
,
Figure 5
Figure 6
tPZL, tPZH Output Enable Time
ns
VIN=2 x VCC for tPLZ
VIN=0 V for tPHZ
Figure 5
Figure 6
tPLZ, tPHZ Output Disable Time
ns
Control Pin Input
Capacitance
CIN
VCC=0
2
6
pF
pF
Input / Output
CI/O
V
CC=05.0 V
Capacitance
Note:
6. This parameter is guaranteed by design but is not tested. The switch contributes no propagation delay other than
the RC delay of the typical on resistance of the switch and the 50pF load capacitance, when driven by an ideal
voltage source (zero output impedance).
Notes:
7. Input driven by 50 Ω; source terminated in 50 Ω.
8. CL includes load and stray capacitance.
9. Input PRR=1.0 MHz; tw=500 ns.
Figure 4. AC Test Circuit
Figure 5. AC Waveforms
© 1996 Fairchild Semiconductor Corporation
NC7SZ66 • Rev. 1.0.5
www.fairchildsemi.com
5
Physical Dimensions
SYMM
C
L
3.00
2.80
0.95
0.95
A
5
4
B
3.00
2.60
1.70
1.50
2.60
1
2
3
(0.30)
1.00
0.50
0.30
0.95
0.20
C
A B
1.90
0.70
TOP VIEW
LAND PATTERN RECOMMENDATION
SEE DETAIL A
1.30
0.90
1.45 MAX
0.15
0.05
0.22
0.08
C
0.10
C
NOTES: UNLESS OTHEWISE SPECIFIED
A) THIS PACKAGE CONFORMS TO JEDEC
MO-178, ISSUE B, VARIATION AA,
B) ALL DIMENSIONS ARE IN MILLIMETERS.
GAGE PLANE
0.25
C) MA05Brev5
8°
0°
0.55
0.35
SEATING PLANE
0.60 REF
Figure 6. 5-Lead SOT23, JEDEC MO-178 1.6 mm
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the
warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/.
Tape and Reel Specifications
Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications:
http://www.fairchildsemi.com/packaging/SOT23-5L_tr.pdf.
Package Designator
Tape Section
Leader (Start End)
Carrier
Cavity Number
125 (Typical)
3000
Cavity Status Cover Type Status
Empty
Filled
Sealed
Sealed
Sealed
M5X
Trailer (Hub End)
75 (Typical)
Empty
© 1996 Fairchild Semiconductor Corporation
NC7SZ66 • Rev. 1.0.5
www.fairchildsemi.com
6
Physical Dimensions
Figure 7. 5-Lead, SC70, EIAJ SC-88a, 1.25 mm Wide
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the
warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/.
Tape and Reel Specifications
Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications:
http://www.fairchildsemi.com/products/analog/pdf/sc70-5_tr.pdf.
Package Designator
Tape Section
Leader (Start End)
Carrier
Cavity Number
125 (Typical)
3000
Cavity Status Cover Type Status
Empty
Filled
Sealed
Sealed
Sealed
P5X
Trailer (Hub End)
75 (Typical)
Empty
© 1996 Fairchild Semiconductor Corporation
NC7SZ66 • Rev. 1.0.5
www.fairchildsemi.com
7
Physical Dimensions
2X
0.05 C
1.45
B
(1)
2X
0.05 C
(0.49)
5X
(0.254)
1.00
(0.75)
(0.52)
1X
TOP VIEW
A
PIN 1 IDENTIFIER
5
0.55MAX
(0.30)
6X
PIN 1
0.05 C
0.05
0.00
RECOMMENED
LAND PATTERN
0.05 C
C
0.45
0.35
0.10
6X
0.00
0.25
6X
0.15
1.0
DETAIL A
0.10
C B A
0.40
0.30
0.05
C
0.35
0.25
5X
5X
0.40
0.30
DETAIL A
PIN 1 TERMINAL
0.075 X 45
CHAMFER
0.5
BOTTOM VIEW
(0.05)
6X
(0.13)
4X
Notes:
1. CONFORMS TO JEDEC STANDARD M0-252 VARIATION UAAD
2. DIMENSIONS ARE IN MILLIMETERS
3. DRAWING CONFORMS TO ASME Y14.5M-1994
4. FILENAME AND REVISION: MAC06AREV4
5. PIN ONE IDENTIFIER IS 2X LENGTH OF ANY
OTHER LINE IN THE MARK CODE LAYOUT.
Figure 8. 6-Lead, MicroPak™, 1.0 mm Wide
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the
warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/.
Tape and Reel Specifications
Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications:
http://www.fairchildsemi.com/products/logic/pdf/micropak_tr.pdf.
Package Designator
Tape Section
Leader (Start End)
Carrier
Cavity Number
125 (Typical)
5000
Cavity Status Cover Type Status
Empty
Filled
Sealed
Sealed
Sealed
L6X
Trailer (Hub End)
75 (Typical)
Empty
© 1996 Fairchild Semiconductor Corporation
NC7SZ66 • Rev. 1.0.5
www.fairchildsemi.com
8
© 1996 Fairchild Semiconductor Corporation
NC7SZ66 • Rev. 1.0.5
www.fairchildsemi.com
9
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC
www.onsemi.com
相关型号:
NC7SZ66P5X
1-CHANNEL, SGL POLE SGL THROW SWITCH, PDSO5, 1.25 MM, EIAJ, SC-88A, SC-70, 5 PIN
ROCHESTER
©2020 ICPDF网 联系我们和版权申明