NC7SZU04P5X

更新时间:2024-10-30 05:39:17
品牌:ONSEMI
描述:TinyLogic UHS无缓冲反相器

NC7SZU04P5X 概述

TinyLogic UHS无缓冲反相器 逻辑芯片 栅极

NC7SZU04P5X 规格参数

是否无铅: 不含铅生命周期:Active
包装说明:TSSOP, TSSOP5/6,.08Reach Compliance Code:compliant
ECCN代码:EAR99HTS代码:8542.39.00.01
Factory Lead Time:1 week风险等级:1.15
系列:LVC/LCX/ZJESD-30 代码:R-PDSO-G5
JESD-609代码:e3长度:2 mm
负载电容(CL):50 pF逻辑集成电路类型:INVERTER
最大I(ol):0.012 A湿度敏感等级:1
功能数量:1输入次数:1
端子数量:5最高工作温度:85 °C
最低工作温度:-40 °C封装主体材料:PLASTIC/EPOXY
封装代码:TSSOP封装等效代码:TSSOP5/6,.08
封装形状:RECTANGULAR封装形式:SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
包装方法:TAPE AND REEL峰值回流温度(摄氏度):NOT SPECIFIED
电源:3.3 V传播延迟(tpd):12.1 ns
认证状态:Not Qualified施密特触发器:NO
座面最大高度:1.1 mm子类别:Gates
最大供电电压 (Vsup):5.5 V最小供电电压 (Vsup):1.65 V
标称供电电压 (Vsup):1.8 V表面贴装:YES
技术:CMOS温度等级:INDUSTRIAL
端子面层:Tin (Sn)端子形式:GULL WING
端子节距:0.65 mm端子位置:DUAL
处于峰值回流温度下的最长时间:NOT SPECIFIED宽度:1.25 mm
Base Number Matches:1

NC7SZU04P5X 数据手册

通过下载NC7SZU04P5X数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
DATA SHEET  
www.onsemi.com  
MARKING  
DIAGRAMS  
TinyLogic UHS Unbuffered  
Inverter  
C5KK  
XYZ  
SIP6  
CASE 127EB  
NC7SZU04  
Pin 1  
Description  
The NC7SZU04 is a single unbuffered inverter from onsemi’s  
UltraHigh Speed series of TinyLogic. The special purpose  
unbuffered circuit design is primarily intended for crystal oscillator or  
analog applications. The device is fabricated with advanced CMOS  
technology to achieve ultrahigh speed with high output drive while  
C5KK  
XYZ  
UDFN6  
CASE 517DP  
Pin 1  
maintaining low static power dissipation over a broad V operating  
CC  
SOT235  
CASE 527AH  
range. The device is specified to operate over the 1.65 V to 5.5 V V  
range.  
CC  
7ZU4M  
Features  
Unbuffered for Crystal Oscillator and Analog Applications  
Balanced Output Drive: 32 mA at 4.5 V V  
CC  
ZU4MG  
SC88A  
CASE 419A02  
Balanced Output Drive: 16 mA at 4.5 V V  
CC  
G
(NC7SZU04P5XL22057)  
Broad V Operating Range: 1.65 V to 5.5 V  
CC  
Matches Performance of LCX Operated at 3.3 V V  
CC  
C5, 7ZU4, ZU4 = Specific Device Code  
Low Quiescent Power: I < 2 mA, V = 5.5 V, T = 25°C  
CC  
CC  
A
KK  
XY  
Z
M
G
= 2Digit Lot Run Traceability Code  
= 2Digit Date Code Format  
= Assembly Plant Code  
= Date Code*  
UltraSmall MicroPakPackages  
SpaceSaving SOT235 and SC88A Packages  
These Devices are PbFree, Halogen Free/BFR Free and are RoHS  
= PbFree Package  
Compliant  
(Note: Microdot may be in either location)  
*Date Code orientation and/or position may  
vary depending upon manufacturing location.  
IEEE / IEC  
1
A
Y
ORDERING INFORMATION  
See detailed ordering, marking and shipping information in the  
package dimensions section on page 7 of this data sheet.  
Figure 1. Logic Symbol  
© Semiconductor Components Industries, LLC, 1996  
1
Publication Order Number:  
June, 2022 Rev. 6  
NC7SZU04/D  
NC7SZU04  
Pin Configurations  
NC 1  
A 2  
6 V  
CC  
NC  
A
1
2
3
5
4
V
Y
CC  
5 NC  
4 Y  
GND  
GND 3  
Figure 2. SC88A and SOT235 (Top  
Figure 3. MicroPak (Top Through View)  
View)  
PIN DEFINITIONS  
FUNCTION TABLE  
Pin # SC88A /  
SOT235  
Inputs  
Output  
Pin # MicroPak Name  
Description  
No Connect  
Input  
A
L
Y
H
L
1
2
3
4
5
1, 5  
2
NC  
A
H
3
GND  
Y
Ground  
H = HIGH Logic Level  
L = LOW Logic Level  
4
Output  
6
V
CC  
Supply Voltage  
www.onsemi.com  
2
NC7SZU04  
ABSOLUTE MAXIMUM RATINGS  
Symbol  
Parameter  
Min  
0.5  
0.5  
0.5  
Max  
6.5  
Unit  
V
V
CC  
Supply Voltage  
V
IN  
DC Input Voltage  
6.5  
V
V
DC Output Voltage  
DC Input Diode Current  
DC Output Diode Current  
V
+ 0.5  
V
OUT  
CC  
I
V
< 0 V  
50  
50  
+50  
50  
mA  
mA  
IK  
IN  
I
V
< 0 V  
OK  
OUT  
OUT  
V
> V  
CC  
I
DC Output Current  
mA  
mA  
°C  
OUT  
I
or I  
DC V or Ground Current  
50  
CC  
GND  
STG  
CC  
T
Storage Temperature Range  
65  
+150  
+150  
+260  
390  
332  
812  
812  
4000  
2000  
T
Junction Temperature Under Bias  
°C  
J
L
T
Junction Lead Temperature (Soldering, 10 Seconds)  
°C  
P
D
Power Dissipation in Still Air  
SOT235  
SC88A  
mW  
MicroPak6  
MicroPak26  
ESD  
Human Body Model, JEDEC: JESD22A114  
Charge Device Model, JEDEC: JESD22C101  
V
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality  
should not be assumed, damage may occur and reliability may be affected.  
RECOMMENDED OPERATING CONDITIONS  
Symbol  
Parameter  
Supply Voltage Operating  
Supply Voltage Data Retention  
Input Voltage  
Conditions  
Min  
1.65  
1.50  
0
Max  
5.5  
5.5  
5.5  
Unit  
V
CC  
V
V
IN  
V
V
V
OUT  
Output Voltage  
0
V
CC  
T
Operating Temperature  
Thermal Resistance  
40  
+85  
320  
377  
154  
154  
°C  
A
q
SOT235  
SC88A  
°C/W  
JA  
MicroPak6  
MicroPak26  
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond  
the Recommended Operating Ranges limits may affect device reliability.  
1. Unused inputs must be held HIGH or LOW. They may not float.  
www.onsemi.com  
3
NC7SZU04  
DC ELECTRICAL CHARACTERISTICS  
T
A
= +25°C  
T = 40 to +85°C  
A
Min  
0.85 V  
0.80 V  
Typ  
Max  
Min  
0.85 V  
0.80 V  
Max  
Symbol  
Parameter  
Conditions  
V
(V)  
Unit  
CC  
V
IH  
HIGH Level Input  
Voltage  
1.8 to 2.7  
3.0 to 5.5  
1.8 to 2.7  
3.0 to 5.5  
V
CC  
CC  
CC  
CC  
V
IL  
LOW Level Input  
Voltage  
0.15 V  
0.15 V  
CC  
V
V
CC  
CC  
0.20 V  
0.20 V  
CC  
V
OH  
HighLevel Output V = GND  
IN  
Voltage  
I
= 100 mA  
= 4 mA  
= 8 mA  
= 12 mA  
= 16 mA  
= 24 mA  
= 32 mA  
1.65 to 5.5  
1.65  
2.3  
V
CC  
0.1  
V
V 0.1  
CC  
1.29  
OH  
CC  
I
1.29  
1.4  
OH  
I
1.9  
2.2  
2.4  
2.3  
3.8  
2.1  
2.4  
2.7  
2.5  
4.0  
1.9  
2.2  
2.4  
2.3  
3.8  
OH  
I
2.7  
OH  
I
3.0  
OH  
I
3.0  
OH  
I
4.5  
OH  
V
OL  
LowLevel Output  
Voltage  
V
= V  
V
IN  
CC  
I
= 100 mA  
1.65 to 5.5  
1.65  
2.3  
0.08  
0.2  
0.22  
0.28  
0.38  
0.42  
0.1  
0.24  
0.3  
0.4  
0.4  
0.55  
0.55  
0.1  
0.24  
0.3  
0.4  
0.4  
0.55  
0.55  
OL  
OL  
OL  
I
= 4 mA  
= 8 mA  
I
I
= 12 mA  
= 16 mA  
= 24 mA  
= 32 mA  
2.7  
OL  
OL  
OL  
OL  
I
3.0  
I
3.0  
I
4.5  
I
Input Leakage  
Current  
V
= 5.5 V, GND  
1.65 to 5.5  
1.65 to 5.5  
1
10  
mA  
mA  
IN  
IN  
I
Quiescent Supply  
Current  
V
V
= 5.5 V, GND  
2
20  
CC  
IN  
I
Peak Supply  
= Open, V = Adjust  
1.8  
2.5  
3.3  
5.0  
2
4
mA  
CCPEAK  
OUT  
IN  
Current in Analog for Peak I Current  
CC  
Operation  
10  
30  
www.onsemi.com  
4
 
NC7SZU04  
DC ELECTRICAL CHARACTERISTICS (NC7SZU04P5XL22057, NC7SZU04L6XL22175,  
NC7SZU04FHXL22175)  
T
A
= +25°C  
T = 40 to +85°C  
A
Min  
0.85 V  
0.80 V  
Typ  
Max  
Min  
0.85 V  
0.80 V  
Max  
Symbol  
Parameter  
V
(V)  
Conditions  
Unit  
CC  
V
IH  
HIGH Level Input  
Voltage  
1.8 to 2.7  
3.0 to 5.5  
1.8 to 2.7  
3.0 to 5.5  
1.65  
V
CC  
CC  
CC  
CC  
V
IL  
LOW Level Input  
Voltage  
0.15 V  
0.15 V  
CC  
V
V
CC  
0.20 V  
0.20 V  
CC  
CC  
V
OH  
HIGH Level  
Output Voltage  
V
= V , I = 100 mA  
1.55  
1.60  
2.10  
2.70  
4.00  
1.29  
1.90  
2.40  
2.30  
3.80  
1.65  
1.80  
2.30  
3.00  
4.40  
1.52  
2.14  
2.75  
2.61  
4.13  
0.00  
0.00  
0.00  
0.00  
0.00  
0.80  
0.10  
0.17  
0.25  
0.226  
1.55  
1.60  
2.10  
2.70  
4.00  
1.29  
1.90  
2.40  
2.30  
3.80  
IN  
IL OH  
1.80  
2.30  
3.00  
4.50  
1.65  
V
= GND  
I
I
I
I
I
= 4 mA  
= 4 mA  
= 8 mA  
= 12 mA  
= 16 mA  
IN  
OH  
OH  
OH  
OH  
OH  
2.30  
3.00  
3.00  
4.50  
V
OL  
LOW Level  
Output Voltage  
1.65  
V
IN  
= V , I = 100 mA  
0.10  
0.20  
0.20  
0.30  
0.50  
0.24  
0.30  
0.40  
0.55  
0.55  
1
0.10  
0.20  
0.20  
0.30  
0.50  
0.24  
0.30  
0.40  
0.55  
0.55  
10  
V
IH OL  
1.80  
2.30  
3.00  
4.50  
1.65  
V
= V  
I
OL  
I
OL  
I
OL  
I
OL  
I
OL  
= 4 mA  
= 4 mA  
= 8 mA  
= 12 mA  
= 16 mA  
IN  
CC  
2.30  
3.00  
3.00  
4.50  
I
IN  
Input Leakage  
Current  
1.65 to 5.5  
V
V
V
= 5.5 V, GND  
mA  
mA  
IN  
I
Quiescent Supply 1.65 to 5.50  
Current  
= 5.5 V, GND  
2
20  
CC  
IN  
I
Peak Supply  
Current in Analog  
Operation  
1.8  
2.5  
3.3  
5.0  
= Open, V = Adjust  
2
4
mA  
CCPEAK  
OUT  
IN  
for Peak I Current  
CC  
10  
30  
www.onsemi.com  
5
NC7SZU04  
AC ELECTRICAL CHARACTERISTICS  
T
A
= +25°C  
T = 40 to +85°C  
A
Min  
Typ  
Max  
11.7  
8.5  
6.2  
4.5  
3.9  
6.0  
5.0  
Min  
Max  
12.1  
9.0  
6.5  
4.8  
4.1  
6.5  
5.5  
Symbol  
, t  
Parameter  
V
(V)  
Conditions  
Unit  
CC  
t
Propagation Delay  
(Figure 4, 5)  
1.65  
1.80  
C = 15 pF,  
ns  
PLH PHL  
L
R = 1 MW  
L
2.50 0.20  
3.30 0.30  
5.00 0.50  
3.30 0.30  
5.00 0.50  
0.00  
C = 50 pF,  
L
R = 500 W  
L
C
Input Capacitance  
4.5  
6.3  
9.5  
pF  
pF  
IN  
C
Power Dissipation Capacitance  
(Note 2) (Figure 6)  
3.30  
PD  
5.00  
2. C is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (I  
) at  
PD  
CCD  
no output loading and operating at 50% duty cycle. C is related to I  
dynamic operating current by the expression:  
PD  
CCD  
I
= (C ) (V ) (f ) + (I static).  
CCD  
PD  
CC  
IN  
CC  
t = 3 ns  
t = 3 ns  
f
r
V
CC  
90%  
50%  
90%  
50%  
V
CC  
INPUT  
10%  
10%  
GND  
INPUT  
OUTPUT  
t
W
C
R
L
L
t
t
PHL  
PLH  
V
OH  
OL  
NOTE:  
50%  
50%  
OUTPUT  
3. C includes load and stray capacitance.  
L
4. Input PRR = 1.0 MHz; t = 500 ns  
W
V
Figure 4. AC Test Circuit  
Figure 5. AC Waveforms  
V
CC  
A
INPUT  
NOTE:  
5. When operating the NC7SZU04’s unbuffered output stage in its linear range, as in oscillator applications, care must be taken to observe  
maximum power rating for the device and package. The high drive nature of the design of the output stage results in substantial simultaneous  
conduction currents when the stage is in the linear region. See the ICCPEAK specification in the DC Electrical Characteristics table.  
6. Input = AC Waveform; t = t = 1.8 ns; PRR = Variable; Duty Cycle = 50%.  
r
f
Figure 6. ICCD Test Circuit  
www.onsemi.com  
6
 
NC7SZU04  
ORDERING INFORMATION  
Part Number  
Top Mark  
7ZU4  
7ZU4  
ZU4  
ZU4  
C5  
Packages  
SOT235  
SOT235  
SC88A  
Shipping  
NC7SZU04M5X  
3000 / Tape & Reel  
3000 / Tape & Reel  
3000 / Tape & Reel  
3000 / Tape & Reel  
5000 / Tape & Reel  
5000 / Tape & Reel  
5000 / Tape & Reel  
5000 / Tape & Reel  
NC7SZU04M5XL22090  
NC7SZU04P5X  
NC7SZU04P5XL22057  
NC7SZU04L6X  
SC88A  
SIP6, MicroPak  
SIP6, MicroPak  
NC7SZU04L6XL22175  
NC7SZU04FHX  
C5  
C5  
UDFN6, MicroPak2  
UDFN6, MicroPak2  
NC7SZU04FHXL22175  
C5  
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging  
Specifications Brochure, BRD8011/D.  
www.onsemi.com  
7
MECHANICAL CASE OUTLINE  
PACKAGE DIMENSIONS  
SIP6 1.45X1.0  
CASE 127EB  
ISSUE O  
DATE 31 AUG 2016  
Electronic versions are uncontrolled except when accessed directly from the Document Repository.  
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.  
DOCUMENT NUMBER:  
DESCRIPTION:  
98AON13590G  
SIP6 1.45X1.0  
PAGE 1 OF 1  
ON Semiconductor and  
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.  
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding  
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically  
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the  
rights of others.  
© Semiconductor Components Industries, LLC, 2019  
www.onsemi.com  
MECHANICAL CASE OUTLINE  
PACKAGE DIMENSIONS  
SC88A (SC705/SOT353)  
CASE 419A02  
ISSUE M  
SCALE 2:1  
DATE 11 APR 2023  
GENERIC MARKING  
DIAGRAM*  
*This information is generic. Please refer to  
device data sheet for actual part marking.  
PbFree indicator, “G” or microdot “G”, may  
or may not be present. Some products may  
not follow the Generic Marking.  
XXXMG  
G
XXX = Specific Device Code  
M
= Date Code  
G
= PbFree Package  
(Note: Microdot may be in either location)  
STYLE 1:  
STYLE 2:  
STYLE 3:  
PIN 1. ANODE 1  
2. N/C  
STYLE 4:  
STYLE 5:  
PIN 1. BASE  
PIN 1. ANODE  
2. EMITTER  
3. BASE  
PIN 1. SOURCE 1  
2. DRAIN 1/2  
3. SOURCE 1  
4. GATE 1  
PIN 1. CATHODE  
2. COMMON ANODE  
3. CATHODE 2  
2. EMITTER  
3. BASE  
4. COLLECTOR  
5. COLLECTOR  
3. ANODE 2  
4. CATHODE 2  
5. CATHODE 1  
4. COLLECTOR  
5. CATHODE  
4. CATHODE 3  
5. CATHODE 4  
5. GATE 2  
STYLE 9:  
STYLE 6:  
PIN 1. EMITTER 2  
2. BASE 2  
STYLE 7:  
STYLE 8:  
Note: Please refer to datasheet for  
style callout. If style type is not called  
out in the datasheet refer to the device  
datasheet pinout or pin assignment.  
PIN 1. ANODE  
2. CATHODE  
3. ANODE  
4. ANODE  
5. ANODE  
PIN 1. BASE  
2. EMITTER  
3. BASE  
PIN 1. CATHODE  
2. COLLECTOR  
3. N/C  
3. EMITTER 1  
4. COLLECTOR  
5. COLLECTOR 2/BASE 1  
4. COLLECTOR  
5. COLLECTOR  
4. BASE  
5. EMITTER  
Electronic versions are uncontrolled except when accessed directly from the Document Repository.  
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.  
DOCUMENT NUMBER:  
DESCRIPTION:  
98ASB42984B  
SC88A (SC705/SOT353)  
PAGE 1 OF 1  
onsemi and  
are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves  
the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular  
purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation  
special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others.  
© Semiconductor Components Industries, LLC, 2018  
www.onsemi.com  
MECHANICAL CASE OUTLINE  
PACKAGE DIMENSIONS  
UDFN6 1.0X1.0, 0.35P  
CASE 517DP  
ISSUE O  
DATE 31 AUG 2016  
Electronic versions are uncontrolled except when accessed directly from the Document Repository.  
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.  
DOCUMENT NUMBER:  
DESCRIPTION:  
98AON13593G  
UDFN6 1.0X1.0, 0.35P  
PAGE 1 OF 1  
ON Semiconductor and  
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.  
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding  
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically  
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the  
rights of others.  
© Semiconductor Components Industries, LLC, 2019  
www.onsemi.com  
MECHANICAL CASE OUTLINE  
PACKAGE DIMENSIONS  
SOT23, 5 Lead  
CASE 527AH  
ISSUE A  
DATE 09 JUN 2021  
q
q
q
q
q
q1  
q2  
GENERIC  
MARKING DIAGRAM*  
XXXM  
XXX = Specific Device Code  
M
= Date Code  
*This information is generic. Please refer to  
device data sheet for actual part marking.  
PbFree indicator, “G” or microdot “G”, may  
or may not be present. Some products may  
not follow the Generic Marking.  
Electronic versions are uncontrolled except when accessed directly from the Document Repository.  
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.  
DOCUMENT NUMBER:  
DESCRIPTION:  
98AON34320E  
SOT23, 5 LEAD  
PAGE 1 OF 1  
ON Semiconductor and  
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.  
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding  
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically  
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the  
rights of others.  
© Semiconductor Components Industries, LLC, 2019  
www.onsemi.com  
onsemi,  
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates  
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.  
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/PatentMarking.pdf. onsemi reserves the right to make changes at any time to any  
products or information herein, without notice. The information herein is provided “asis” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the  
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use  
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products  
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information  
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may  
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license  
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems  
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should  
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,  
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death  
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal  
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.  
ADDITIONAL INFORMATION  
TECHNICAL PUBLICATIONS:  
Technical Library: www.onsemi.com/design/resources/technicaldocumentation  
onsemi Website: www.onsemi.com  
ONLINE SUPPORT: www.onsemi.com/support  
For additional information, please contact your local Sales Representative at  
www.onsemi.com/support/sales  

NC7SZU04P5X 替代型号

型号 制造商 描述 替代类型 文档
TC7SZU04FUTE85L TOSHIBA IC LVC/LCX/Z SERIES, 1-INPUT INVERT GATE, PDSO5, SSOP-5, Gate 功能相似
NC7SZU04P5X_NL FAIRCHILD Inverter, LVC/LCX/Z Series, 1-Func, 1-Input, CMOS, PDSO5, 1.25 MM, ROHS COMPLIANT, EIAJ, S 功能相似

NC7SZU04P5X 相关器件

型号 制造商 描述 价格 文档
NC7SZU04P5X-L22057 ONSEMI TinyLogic UHS无缓冲反相器 获取价格
NC7SZU04P5X_09 FAIRCHILD TinyLogic® UHS Unbuffered Inverter 获取价格
NC7SZU04P5X_NL FAIRCHILD Inverter, LVC/LCX/Z Series, 1-Func, 1-Input, CMOS, PDSO5, 1.25 MM, ROHS COMPLIANT, EIAJ, SC-88A, SC-70, 5 PIN 获取价格
NC7SZU04_09 FAIRCHILD TinyLogic® UHS Unbuffered Inverter 获取价格
NC7V5DA ZETEX Zener Diode, 7.5V V(Z), 获取价格
NC7V5DC ZETEX Zener Diode, 7.5V V(Z), 获取价格
NC7V5DWP ZETEX Zener Diode, 7.5V V(Z), Silicon, Unidirectional, 0.019 X 0.019 INCH, G23, DIE-1 获取价格
NC7WB126K8X FAIRCHILD SPST, 2 Func, 1 Channel, PDSO8, 3.1 X 2.00 MM, 0.70 MM HEIGHT, US-8 获取价格
NC7WB3125 FAIRCHILD TinyLogic&#63720; UHS 2-Bit Low Power Bus Switch 获取价格
NC7WB3125K8X FAIRCHILD TinyLogic&#63720; UHS 2-Bit Low Power Bus Switch 获取价格

NC7SZU04P5X 相关文章

  • HARTING(浩亭)圆形连接器产品选型手册
    2024-10-31
    6
  • HYCON(宏康科技)产品选型手册
    2024-10-31
    6
  • GREEGOO整流二极管和晶闸管产品选型手册
    2024-10-31
    7
  • 西门子豪掷106亿美元,战略收购工程软件巨头Altair
    2024-10-31
    8