NCP171AMX120100TCG [ONSEMI]
LDO Regulator - Ultra-Low Iq, Dual Power Mode 50nA, 80mA;型号: | NCP171AMX120100TCG |
厂家: | ONSEMI |
描述: | LDO Regulator - Ultra-Low Iq, Dual Power Mode 50nA, 80mA |
文件: | 总22页 (文件大小:1480K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
LDO Regulator - Ultra-Low
Iq, Dual Power Mode
50ꢀnA, 80ꢀmA
NCP171
The NCP171 is a Dual mode LDO offering up to 80 mA in Active
Mode and as low as 50 nA of Iq in Low Power Mode. The Dual Mode
function is selectable with the ECO pin allowing for dynamic
switching between Active and Low Power Modes, ideal in long life
battery powered applications.
www.onsemi.com
The output Voltage in Low Power mode can be lowered by an
internally factory programmed value ranging 50 mV, 100 mV, 150 mV
or 200 mV with respect to the nominal output voltage in Active Mode.
This feature further lowers the application consumption in sleep mode.
The NCP171 is in the SLIQ (Super Low Iq) LDO family and is
available in small XDFN4 1.2 x 1.2 package.
1
XDFN4 1.2x1.2
AM SUFFIX
CASE 711BC
Features
MARKING DIAGRAM
• Operating Input Voltage Range: 1.7 V to 5.5 V
• Output Voltage Range: 0.6 V to 3.3 V (50 mV steps)
XXM
1
• Low Power Mode / Active Mode Externally Controlled by ECO pin
• Internally Factory Programmable Output Voltage Offset for Low
Power/Active Mode to 50 mV, 100 mV, 150 mV, 200 mV
• Quiescent Current of 50 nA at No Load, (Low Power mode)
• Maximum Current 80 mA in Active Mode and 5 mA in Low Power
Mode
XX = Specific Device Code
M
= Date Code
PIN CONNECTIONS
• Low Dropout: 41 mV Typ. at 80 mA (Vout = 3.3 V)
•
2% Output Voltage Accuracy in Active Mode
ENA
ECO
4
3
IN
• High PSRR: 65 dB at 1 kHz in Active Mode
• Active Output Discharge for Fast Output Turn−Off
• Current Limitation, Thermal Shutdown
• Available in Small XDFN4 1.2x1.2 Package
• These are Pb−Free Devices
GND
1
2
OUT
(Top View)
Typical Applications
• IoT
ORDERING INFORMATION
See detailed ordering, marking and shipping information on
page 20 of this data sheet.
• RFID
• Portable Communication Equipment
• Consumer Electronics
Figure 1. Typical Application Schematic
© Semiconductor Components Industries, LLC, 2018
1
Publication Order Number:
December, 2019 − Rev. 2
NCP171/D
NCP171
Active Mode part
ECO
Current Limit &
Thermal Shutdown
Low Power part
Vin
Vout
Active Discharge
Vref
Voltage Scaling
ENA
GND
Figure 2. Simplified Schematic Block Diagram
Table 1. PIN FUNCTION DESCRIPTION
Pin No.
XDFN4
Pin Name
Description
1
ECO
Low Power and Active mode control pin. Pulling this pin to ground switches the device into
Low Power mode and pushing this pin to output voltage switches the device into Active mode.
2
3
4
OUT
IN
Output pin
Input pin
ENA
Enable pin. Driving ENA above 1.2 V turns on the regulator. Driving ENA below 0.4 V puts the
regulator into shutdown mode.
5(EP)
GND
Ground
www.onsemi.com
2
NCP171
Table 2. ABSOLUTE MAXIMUM RATINGS
Rating
Symbol
Value
6.0
Unit
V
Input Voltage (Note 1)
V
IN
Output Voltage
V
V
−0.3 to V
−0.3 to V
−0.3 to V
120
V
OUT
ENA
ECO
OUT
IN
IN
IN
Enable pin
V
ECO pin
V
V
Output Current
I
mA
mW
°C
°C
V
Power Dissipation XDFN4
Maximum Junction Temperature
Storage Temperature
P
400
D
T
85
J(MAX)
T
STG
−55 to 125
2000
ESD Capability, Human Body Model (Note 2)
ESD Capability, Machine Model (Note 2)
ESD
HBM
ESD
200
V
MM
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. Refer to ELECTRICAL CHARACTERISTIS and APPLICATION INFORMATION for Safe Operating Area.
2. This device series incorporates ESD protection and is tested by the following methods:
ESD Human Body Model tested per AEC−Q100−002 (EIA/JESD22−A114)
ESD Machine Model tested per AEC−Q100−003 (EIA/JESD22−A115)
Latchup Current Maximum Rating tested per JEDEC standard: JESD78
Table 3. THERMAL CHARACTERISTICS (Note 3)
Rating
Symbol
Value
Unit
Thermal Characteristics, XDFN4
Thermal Resistance, Junction−to−Air
R
170
°C/W
q
JA
3. This data was derived by thermal simulations for a single device mounted on the 40 mm x 40 mm x 1.6 mm FR4 PCB with 2−ounce 800 sq
mm copper area on top and bottom.
www.onsemi.com
3
NCP171
Table 4. ELECTRICAL CHARACTERISTICS −40°C ≤ T ≤ 85°C; V = V
+ 0.5 V or 1.7 V, whichever is greater; I
=
J
IN
OUTNOM
OUT
100 mA at Low Power Mode / 1 mA at Active Mode, C = C
= 1.0 mF, unless otherwise noted. Typical values are at T = +25°C. (Note 4)
J
IN
OUT
Parameter
Operating Input Voltage
Output Voltage
Test Conditions
Symbol
Min
1.7
Typ
Max
5.5
Unit
V
VIN
−40°C ≤ T ≤ 85°C,
Low Power Mode (LP)
ECO = 0
V
=
x0.97
x1.03
V
J
OUTAC
OUTLP
I
< 5 mA
V
+
OUT
NCP171A3MXxxxyyy
V
OFFSET
−40°C ≤ T ≤ 85°C,
OUT
Low Power Mode (LP)
ECO = 0
NCP171AMXxxxyyy
x0.95
x1.05
V
J
I
< 5 mA
T = +25°C,
Active Mode (AC)
ECO = Voutnom
x0.98
x0.97
x1.02
x1.03
V
V
J
0 ≤ I
<80 mA
OUT
−40°C ≤ T ≤ 85°C,
Active Mode
ECO = Voutnom
J
0 ≤ I
<80 mA
OUT
Offset (Note 5)
Line Regulation
T = +25°C
V
50, 100,
150, 200
mV
mV
J
OFFSET
V
= V
+ 0.5 V to
Line
Reg
10
10
10
I
= 100 mA, LP Mode
IN
OUT
IN
OUT
5.5 V, V ≥ 1.7 V
I
= 1 mA, AC Mode
OUT
Load Regulation
1 mA ≤ I
≤ 80 mA, V = V
+ 0.5 V or
Load
mV
mV
mV
OUT
IN
OUT
Reg
V
IN
≥ 1.7 V Active Mode, ECO = Voutnom
0 mA < I
< 5 mA, V = V + 0.5 V or
OUT
≥ 1.7 V Low Power Mode, ECO = 0
30
OUT
IN
V
IN
Dropout Voltage (Note 6)
IOUT = 80 mA,
Active Mode,
ECO = V
V
OUT
V
OUT
V
OUT
V
OUT
V
OUT
= 1.8 V
= 2.5 V
= 2.8 V
= 3.0 V
= 3.3 V
81
51
47
43
41
110
80
75
65
55
OUTNOM
Output Current
Active Mode, ECO = VOUTNOM
Low Power Mode, ECO = 0
I
80
5
mA
mA
mA
OUTAM
Output Current
I
OUTLP
Output Current Limit
V
= 90% V
,
I
140
9
170
15
OUT
OUT(nom)
SC
Active mode, ECO = V
OUTNOM
Output Current Limit
Quiescent Current
V
= 90% V
,
I
mA
nA
OUT
OUT(nom)
SC
Low Power mode, ECO = 0
IOUT = 0
T = +25°C
J
I
Q
50
Low Power Mode
IOUT = 0 mA,
−40°C ≤ T ≤ 85°C
150
95
nA
mA
nA
J
Low Power Mode
IOUT = 0 mA,
Active Mode
−40°C ≤ T ≤ 85°C
55
30
J
Shutdown Current (Note 7)
V
ENA
≤ 0.4 V, V = 5.5 V
I
DIS
IN
4. Performance guaranteed over the indicated operating temperature range by design and/or characterization. Production tested at T = T
J
A
= 25°C. Low duty cycle pulse techniques are used during testing to maintain the junction temperature as close to ambient as possible
5. The Offset voltage is internally programed to 50 mV, 100 mV, 150 mV or 200 mV. See the table ORDERING INFORMATION for more details.
6. The Dropout at Nominal Output Voltage below 1.8 V and output current 80 mA was not defined and tested. The dropout at Nominal Output
Voltage above 1.8 V was characterized when VOUT falls 3% below the nominal regulated voltage.
7. Shutdown Current is the current flowing into the IN pin when the device is in the disable state (V
8. Guaranteed by design and characterization.
< 0.4 V).
ENA
www.onsemi.com
4
NCP171
Table 4. ELECTRICAL CHARACTERISTICS −40°C ≤ T ≤ 85°C; V = V
+ 0.5 V or 1.7 V, whichever is greater; I
=
J
IN
OUTNOM
OUT
100 mA at Low Power Mode / 1 mA at Active Mode, C = C
= 1.0 mF, unless otherwise noted. Typical values are at T = +25°C. (Note 4)
J
IN
OUT
Parameter
Ground Current
Test Conditions
Symbol
Min
Typ
230
Max
Unit
I
nA
Low Power Mode, Iout = 10 mA
Low Power Mode, Iout = 100 mA
Low Power Mode, Iout = 1 mA
Low Power Mode, Iout = 5 mA
GND
620
1500
2500
120
Active Mode, I
= 1 mA
= 10 mA
= 80 mA
mA
OUT
OUT
OUT
Active Mode, I
Active Mode, I
190
420
ENA Pin Threshold Voltage
ECO Pin Threshold Voltage
Power Supply Rejection Ratio
ENA Input Voltage “H”
V
1.2
0.5
V
V
V
ENAH
ENA Input Voltage “L”
V
0.4
0.2
ENAL
ECO Input Voltage “H”
ECO Input Voltage “L”
V
ECOH
V
ECOL
V
IN
= V
IN
+ 1 V or 2.0 V whichever is higher,
PSRR
65
dB
OUT
ΔV = 0.1 V
, IOUT = 10 mA, f = 1 kHz,
pk−pk
Active Mode
Output Noise Voltage
V
= 0.8 V, I
= 80 mA, f = 10 Hz to
V
54
165
20
mV
rms
OUT
OUT
N
100 kHz, Active Mode
Thermal Shutdown Temperature
(Note 8)
Temperature increasing from T = +25°C,
T
SD
°C
°C
J
Active Mode
Thermal Shutdown Hysteresis
(Note 8)
Temperature falling from T , Active Mode
T
SDH
SD
4. Performance guaranteed over the indicated operating temperature range by design and/or characterization. Production tested at T = T
J
A
= 25°C. Low duty cycle pulse techniques are used during testing to maintain the junction temperature as close to ambient as possible
5. The Offset voltage is internally programed to 50 mV, 100 mV, 150 mV or 200 mV. See the table ORDERING INFORMATION for more details.
6. The Dropout at Nominal Output Voltage below 1.8 V and output current 80 mA was not defined and tested. The dropout at Nominal Output
Voltage above 1.8 V was characterized when VOUT falls 3% below the nominal regulated voltage.
7. Shutdown Current is the current flowing into the IN pin when the device is in the disable state (V
8. Guaranteed by design and characterization.
< 0.4 V).
ENA
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
www.onsemi.com
5
NCP171
APPLICATION INFORMATION
A typical application circuit for NCP171 series is shown
in Figure 3.
Low power mode to Active mode and reversely are depicted
in Typical Characteristics chapter.
Enable Operation
The NCP171 device uses the ENA pin to enable/disable
its device. If the ENA pin voltage is higher than 1.2 V the
device is guaranteed to be enabled. The voltage below 0.4 V
at the ENA pin assures turned−off output voltage. The active
discharge transistor is active so that the output voltage
VOUT is pulled to GND through the internal NMOS with
R
DS(on)
about 50 ohms. In the disable state the device
consumes as low as 30 nA from the VIN. In the case where
the ENABLE function isn’t required the ENA pin should be
tied directly to VIN.
Figure 3. Typical Application Schematic
Thermal
Input Decoupling Capacitor (C1)
As power across the NCP171 increases, it might become
necessary to provide some thermal relief. The maximum
power dissipation supported by the device is dependent
upon board design and layout. Mounting pad configuration
on the PCB, the board material, and also the ambient
temperature affect the rate of temperature rise for the part.
This is stating that when the NCP171 has good thermal
conductivity through the PCB, the junction temperature will
be relatively low with high power dissipation.
A 1.0 mF ceramic input decoupling capacitor should be
connected as close as possible to the input and ground pin of
the NCP171. Higher values and lower ESR improves line
transient response.
Output Decoupling Capacitor (C2)
A 1.0 mF ceramic output decoupling capacitor is sufficient
to achieve stable operation of the IC. If tantalum capacitor
is used, and its ESR is high, the loop oscillation may result.
If output capacitor is composed from few ceramic capacitors
in parallel, the operation can be unstable. The capacitor
should be connected as close as possible to the output and
ground pin. Larger values and lower ESR improves dynamic
parameters. The maximum capacitor 4.7 mF could be
connected to the output in order to keep stable operation.
The power dissipation across the device can be roughly
represented by the equation:
ǒ
Ǔ
PD + VIN * VOUT @ IOUT [W]
(eq. 1)
The maximum power dissipation depends on the thermal
resistance of the case and circuit board, the temperature
differential between the junction and ambient, PCB
orientation and the rate of air flow.
ECO Mode, Voltage Scaling
The maximum allowable power dissipation can be
calculated using the following equation:
The NCP171 has two distinct modes of operation, Active
mode and Low Power mode, selectable with the ECO pin.
When asserted low the ECO pin switches the device to Low
Power mode with reduced load of 5 mA and while
significantly reducing the quiescent current down to 50 nA.
Further system level power reduction is made possible by
reducing the output Voltage by the internally programmed
offsets of 50 mV, 100 mV, 150 mV and 200 mV in Low
Power mode. When asserted high the ECO pin switches the
device to Active mode. Active mode features higher loads,
up to 80 mA, Faster transient, High PSRR and lower noise.
Upon startup by Enable or Input Voltage the NCP171
defaults into Active mode, regardless of the state of the ECO
pin, to enable fast and stable startup to the target output
voltage. The duration of this enforced Active mode is
typically 35 ms. This function helps to absorb high current
spikes for the proper charging of output capacitor and startup
current of the customer’s application. The transitions from
ǒ
Ǔ
PMAX + TJUNCTION * TAMBIENT ńqJA [W] (eq. 2)
Where (T
– T ) is the temperature
AMBIENT
JUNCTION
differential between the junction and the surrounding
environment and q is the thermal resistance from the
JA
junction to the ambient.
Connecting the exposed pad or non connected pins to a
large ground pad or plane helps to conduct away heat and
improves thermal relief.
PCB layout
Make VIN and GND line sufficient. If their impedance is
high, noise pickup or unstable operation may result. Connect
capacitors C1 and C2 as close as possible to the IC, and make
wiring as short as possible.
www.onsemi.com
6
NCP171
TYPICAL CHARACTERISTICS
80
70
60
50
70
NCP171AMX080075TCG
V
I
= 0.75 V, C = C = 1 mF,
= 0, Low Power Mode
OUT(nom)
IN
OUT
68
66
OUT
T = 85°C
A
T = 25°C
A
T = 85°C
A
T = −40°C
A
NCP171AMX080075TCG
T = 25°C
A
V
I
= 0.8 V, C = C = 1 mF,
= 0, Active Mode
T = −40°C
A
OUT(nom)
IN
OUT
64
OUT
40
30
62
60
1.5 2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
5.5
5.5
1.5 2.0
2.5
3.0
3.5
4.0
4.5
5.0 5.5
INPUT VOLTAGE (V)
INPUT VOLTAGE (V)
Figure 4. Quiescent Current vs. Input Voltage
in Low Power Mode
Figure 5. Quiescent Current vs. Input Voltage
in Active Mode
80
70
60
74
72
70
68
NCP171AMX180175TCG
NCP171AMX180175TCG
V
I
= 1.75 V, C = C
= 1 mF,
V
I
= 1.8 V, C = C
= 1 mF,
OUT(nom)
IN
OUT
OUT(nom)
IN
OUT
= 0, Low Power Mode
= 0, Active Mode
OUT
OUT
T = 85°C
A
T = 25°C
A
T = 85°C
A
T = −40°C
A
T = 25°C
A
50
T = −40°C
A
40
30
66
64
2.0
2.5
3.0
3.5
4.0
4.5
5.0
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
INPUT VOLTAGE (V)
INPUT VOLTAGE (V)
Figure 6. Quiescent Current vs. Input Voltage
in Low Power Mode
Figure 7. Quiescent Current vs. Input Voltage
in Active Mode
80
70
60
50
75
73
71
69
NCP171AMX280275TCG
V
I
= 2.75 V, C = C
= 1 mF,
OUT(nom)
IN
OUT
= 0, Low Power Mode
OUT
T = 85°C
T = 25°C
T = −40°C
A
A
T = 85°C
A
A
T = 25°C
NCP171AMX280275TCG
A
T = −40°C
A
V
I
= 2.8 V, C = C = 1 mF,
OUT(nom)
IN
OUT
= 0, Active Mode
OUT
40
30
67
65
3.0
3.5
4.0
4.5
5.0
3.0
3.5
4.0
4.5
5.0
5.5
INPUT VOLTAGE (V)
INPUT VOLTAGE (V)
Figure 8. Quiescent Current vs. Input Voltage
in Low Power Mode
Figure 9. Quiescent Current vs. Input Voltage
in Active Mode
www.onsemi.com
7
NCP171
TYPICAL CHARACTERISTICS
80
70
60
50
76
NCP171AMX330310TCG
NCP171AMX330310TCG
V
I
= 3.1 V, C = C
= 0, Low Power Mode
= 1 mF,
V
I
= 3.3 V, C = C
= 0, Active Mode
= 1 mF,
OUT(nom)
IN
OUT
OUT(nom)
IN
OUT
74
72
70
OUT
OUT
T = 85°C
T = 25°C
T = −40°C
A
A
T = 85°C
T = 25°C
T = −40°C
A
A
A
A
40
30
68
66
3.5
4.0
4.5
5.0
5.5
3.5
4.0
4.5
5.0
5.5
INPUT VOLTAGE (V)
INPUT VOLTAGE (V)
Figure 10. Quiescent Current vs. Input Voltage
in Low Power Mode
Figure 11. Quiescent Current vs. Input Voltage
in Active Mode
70
69
68
67
66
65
64
63
62
80
70
V
V
V
V
V
V
= 5.5 V
= 5.0 V
= 4.0 V
= 3.0 V
= 2.0 V
= 1.7 V
NCP171AMX080075TCG
IN
IN
IN
IN
IN
IN
V
= 0.8 V, I
= 0 mA
OUT(nom)
OUT
C
= C
= 1 mF, Active Mode
IN
OUT
60
50
V
V
V
V
V
V
= 5.5 V
= 5.0 V
= 4.0 V
= 3.0 V
= 2.0 V
= 1.7 V
IN
IN
IN
IN
IN
IN
NCP171AMX080075TCG
= 0.75 V, I = 0 mA
40
30
V
= C
OUT(nom)
OUT
61
60
−40
C
= 1 mF, Low Power Mode
IN
OUT
−40
−20
0
20
40
60
80
−20
0
20
40
60
80
TEMPERATURE (°C)
TEMPERATURE (°C)
Figure 12. Quiescent Current vs. Temperature
in Low Power Mode
Figure 13. Quiescent Current vs. Temperature
in Active Mode
80
70
60
50
74
72
V
IN
V
IN
V
IN
V
IN
V
IN
V
IN
= 5.5 V
= 5.0 V
= 4.5 V
= 4.0 V
= 3.0 V
= 2.3 V
V
IN
V
IN
V
IN
V
IN
V
IN
V
IN
= 5.5 V
= 5.0 V
= 4.5 V
= 4.0 V
= 3.0 V
= 2.3 V
70
68
NCP171AMX180175TCG
= 1.75 V, I = 0 mA
NCP171AMX180175TCG
40
30
66
64
V
= C
V
= 1.8 V, I
= 0 mA
OUT(nom)
OUT
OUT(nom)
OUT
C
= 1 mF, Low Power Mode
C
= C
= 1 mF, Active Mode
IN
OUT
IN
OUT
−40
−20
0
20
40
60
80
−40
−20
0
20
40
60
80
TEMPERATURE (°C)
TEMPERATURE (°C)
Figure 14. Quiescent Current vs. Temperature
in Low Power Mode
Figure 15. Quiescent Current vs. Temperature
in Active Mode
www.onsemi.com
8
NCP171
TYPICAL CHARACTERISTICS
80
70
60
50
75
NCP171AMX280275TCG
NCP171AMX280275TCG
= 2.8 V, I = 0 mA
V
= 2.75 V, I
= 0 mA
OUT(nom)
OUT
V
OUT(nom)
OUT
C
= C
= 1 mF,
73
71
IN
OUT
C
= C
= 1 mF,
IN
OUT
Low Power Mode
Active Mode
V
V
V
V
V
V
= 5.5 V
= 5.0 V
= 4.5 V
= 4.0 V
= 3.5 V
= 3.3 V
IN
IN
IN
IN
IN
IN
V
V
V
V
V
V
= 5.5 V
= 5.0 V
= 4.5 V
= 4.0 V
= 3.5 V
= 3.3 V
69
IN
IN
IN
IN
IN
IN
40
30
67
65
−40
−20
0
20
40
60
80
−40
−20
0
20
40
60
80
TEMPERATURE (°C)
TEMPERATURE (°C)
Figure 16. Quiescent Current vs. Temperature
in Low Power Mode
Figure 17. Quiescent Current vs. Temperature
in Active Mode
80
70
60
50
76
74
72
NCP171AMX330310TCG
NCP171AMX330310TCG
V
= 3.1 V, I
= 0 mA
V
= 3.3 V, I
= 0 mA
OUT(nom)
OUT
OUT(nom)
OUT
C
= C
= 1 mF,
C
= C
= 1 mF,
IN
OUT
IN
OUT
V
V
V
V
V
= 5.5 V
= 5.0 V
= 4.5 V
= 4.0 V
= 3.8 V
IN
IN
IN
IN
IN
Low Power Mode
Active Mode
70
V
V
V
V
V
= 5.5 V
= 5.0 V
= 4.5 V
= 4.0 V
= 3.8 V
IN
IN
IN
IN
IN
68
66
40
30
−40
−20
0
20
40
60
80
−40
−20
0
20
40
60
80
TEMPERATURE (°C)
TEMPERATURE (°C)
Figure 18. Quiescent Current vs. Temperature
in Low Power Mode
Figure 19. Quiescent Current vs. Temperature
in Active Mode
0.750
0.748
0.746
0.744
0.803
0.802
0.801
0.800
T = 85°C
A
T = 25°C
A
T = −40°C
A
NCP171AMX080075TCG
V
= 0.8 V, I
= 1 mA
OUT(nom)
OUT
C
= C
= 1 mF,
IN
OUT
Active Mode
T = 85°C
A
T = 25°C
A
NCP171AMX080075TCG
T = −40°C
A
V
= 0.75 V, I
= 0.1 mA
0.742
0.740
OUT(nom)
OUT
0.799
0.798
C
= C
= 1 mF,
IN
OUT
Low Power Mode
3.0 3.5 4.0
INPUT VOLTAGE (V)
1.5 2.0
2.5
4.5
5.0
5.5
1.5 2.0
2.5
3.0
3.5
4.0
4.5
5.0 5.5
INPUT VOLTAGE (V)
Figure 20. Output Voltage vs. Input Voltage in
Low Power Mode
Figure 21. Output Voltage vs. Input Voltage in
Active Mode
www.onsemi.com
9
NCP171
TYPICAL CHARACTERISTICS
0.750
0.748
0.746
0.744
0.803
V
IN
V
IN
= 1.7 V
= 5.5 V
V
IN
V
IN
V
IN
= 5.5 V
= 3.0 V
= 1.7 V
0.802
0.801
0.800
NCP171AMX080075TCG
= 0.75 V, I
NCP171AMX080075TCG
= 0.8 V, I = 1 mA
V
= 0.1 mA
0.799
0.798
0.742
0.740
OUT(nom)
OUT
V
OUT(nom)
OUT
C
= C
= 1 mF,
IN
OUT
C
= C
= 1 mF, Active Mode
IN
OUT
Low Power Mode
−40 −20
0
20
40
60
80
−40
−20
0
20
40
60
80
TEMPERATURE (°C)
TEMPERATURE (°C)
Figure 22. Output Voltage vs. Temperature in
Low Power Mode
Figure 23. Output Voltage vs. Temperature in
Active Mode
1.746
1.744
1.742
1.740
1.746
1.744
T = 85°C
A
T = 25°C
A
T = −40°C
A
1.742
1.740
V
IN
V
IN
V
IN
= 5.5 V
= 4.0 V
= 2.3 V
NCP171AMX180175TCG
V
C
= 1.75 V, I
= 0.1 mA
OUT(nom)
OUT
= C
= 1 mF,
IN
OUT
NCP171AMX180175TCG
= 1.75 V, I = 0.1 mA
Low Power Mode
V
OUT(nom)
OUT
1.738
1.736
1.738
1.736
C
= C
= 1 mF,
IN
OUT
Low Power Mode
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
−40
−20
0
20
40
60
80
INPUT VOLTAGE (V)
TEMPERATURE (°C)
Figure 24. Output Voltage vs. Input Voltage in
Low Power Mode
Figure 25. Output Voltage vs Temperature in
Low Power Mode
1.804
1.802
1.800
1.798
1.804
1.802
1.800
1.798
T = 85°C
V
IN
V
IN
= 2.3 V
= 5.5 V
A
T = 25°C
A
T = −40°C
A
NCP171AMX180175TCG
V
= 1.8 V, I
= 1 mA
OUT(nom)
OUT
C
= C
= 1 mF,
IN
OUT
Active Mode
NCP171AMX180175TCG
= 1.8 V, I = 1.8 mA
1.796
1.794
1.796
1.794
V
OUT(nom)
OUT
C
= C
= 1 mF, Active Mode
IN
OUT
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
−40
−20
0
20
40
60
80
INPUT VOLTAGE (V)
TEMPERATURE (°C)
Figure 26. Output Voltage vs. Input Voltage in
Active Mode
Figure 27. Output Voltage vs. Temperature in
Active Mode
www.onsemi.com
10
NCP171
TYPICAL CHARACTERISTICS
2.750
2.745
2.740
2.735
2.804
2.800
NCP171AMX280275TCG
NCP171AMX280275TCG
V
= 2.75 V, I
= 0.1 mA
2.796
2.792
OUT(nom)
OUT
V
= 2.8 V, I
= 1 mA
C
= C
= 1 mF,
OUT(nom)
OUT
IN
OUT
C
= C
= 1 mF,
Low Power Mode
IN
OUT
Active Mode
T = 85°C
T = 85°C
A
2.730
2.725
A
2.788
2.784
T = 25°C
T = 25°C
A
A
T = −40°C
A
T = −40°C
A
3.0
3.5
4.0
4.5
5.0
5.5
3.0
3.5
4.0
4.5
5.0
5.5
INPUT VOLTAGE (V)
INPUT VOLTAGE (V)
Figure 28. Output Voltage vs. Input Voltage in
Low Power Mode
Figure 29. Output Voltage vs. Input Voltage in
Active Mode
2.750
2.745
2.740
2.735
2.804
2.800
2.796
2.792
V
IN
V
IN
= 3.3 V
= 5.5 V
V
IN
V
IN
= 3.3 V
= 5.5 V
NCP171AMX280275TCG
NCP171AMX280275TCG
V
C
= 2.8 V, I
= 1 mA
V
C
= 2.75 V, I
= 0.1 mA
OUT(nom)
OUT
OUT(nom)
OUT
2.730
2.725
2.788
2.784
= C
= 1 mF,
= C
= 1 mF,
IN
OUT
IN
OUT
Active Mode
Low Power Mode
−40
−20
0
20
40
60
80
−40
−20
0
20
40
60
80
TEMPERATURE (°C)
TEMPERATURE (°C)
Figure 30. Output Voltage vs. Temperature in
Low Power Mode
Figure 31. Output Voltage vs Temperature in
Active Mode
3.096
3.092
3.088
3.084
3.304
3.300
3.296
3.292
T = 85°C
A
T = 25°C
A
T = −40°C
A
NCP171AMX330310TCG
V
= 3.1 V, I
= 0.1 mA
OUT(nom)
OUT
C
= C
= 1 mF,
IN
OUT
Low Power Mode
NCP171AMX330310TCG
= 3.3 V, I = 1 mA
V
OUT(nom)
OUT
C
= C
= 1 mF,
IN
OUT
Active Mode
T = 85°C
3.080
3.076
A
3.288
3.284
T = 25°C
A
T = −40°C
A
3.5
4.0
4.5
INPUT VOLTAGE (V)
5.0
5.5
3.5
4.0
4.5
INPUT VOLTAGE (V)
5.0
5.5
Figure 32. Output Voltage vs. Input Voltage in
Low Power Mode
Figure 33. Output Voltage vs. Input Voltage in
Active Mode
www.onsemi.com
11
NCP171
TYPICAL CHARACTERISTICS
3.096
3.092
3.088
3.084
3.305
V
IN
V
IN
= 3.6 V
= 5.5 V
3.300
V
IN
= 3.8 V − 5.5 V
3.295
3.290
NCP171AMX330310TCG
NCP171AMX330310TCG
V
= 3.1 V, I
= 0.1 mA
V
= 3.3 V, I
= 1 mA
OUT(nom)
OUT
3.080
3.076
3.285
3.280
OUT(nom)
OUT
C
= C
= 1 mF,
C
= C
= 1 mF,
IN
OUT
IN
OUT
Low Power Mode
Active Mode
20 40
TEMPERATURE (°C)
−40
−20
0
20
40
60
80
−40
−20
0
60
80
TEMPERATURE (°C)
Figure 34. Output Voltage vs. Temperature in
Low Power Mode
Figure 35. Output Voltage vs. Temperature in
Active Mode
0.748
0.746
0.803
0.802
0.801
NCP171AMX080075TCG
V
= 0.75 V, V = 1.7 V
OUT(nom)
IN
C
= C
= 1 mF,
IN
OUT
Low Power Mode
0.744
0.742
NCP171AMX080075TCG
T = 85°C
A
V
= 0.8 V, V = 1.7 V
OUT(nom)
IN
T = 25°C
0.800
A
C
= C
= 1 mF,
IN
OUT
T = −40°C
A
Active Mode
T = 85°C
0.740
0.738
0.799
0.798
A
T = 25°C
A
T = −40°C
A
0
1
2
3
4
5
0
10
20
30
40
50
60
70
80
OUTPUT CURRENT (mA)
OUTPUT CURRENT (mA)
Figure 36. Output Voltage vs. Output Current
in Low Power Mode
Figure 37. Output Voltage vs. Output Current
in Active Mode
1.750
1.746
1.742
1.738
1.802
1.800
1.798
1.796
NCP171AMX180175TCG
T = 85°C
A
V
= 1.8 V, V = 2.3 V
OUT(nom)
IN
T = 25°C
A
C
= C
= 1 mF,
IN
OUT
T = −40°C
A
Active Mode
NCP171AMX180175TCG
= 1.75 V, V = 2.3 V
T = 85°C
A
V
T = 25°C
1.734
1.730
1.794
1.792
OUT(nom)
IN
A
C
= C
= 1 mF,
T = −40°C
A
IN
OUT
Low Power Mode
0
1
2
3
4
5
0
10
20
30
40
50
60
70
80
OUTPUT CURRENT (mA)
OUTPUT CURRENT (mA)
Figure 38. Output Voltage vs. Output Current
in Low Power Mode
Figure 39. Output Voltage vs. Output Current
in Active Mode
www.onsemi.com
12
NCP171
TYPICAL CHARACTERISTICS
2.755
2.750
2.745
2.740
2.806
2.802
2.798
NCP171AMX280275TCG
T = 85°C
A
NCP171AMX280275TCG
= 2.75 V, V = 3.3 V
V
= 2.8 V, V = 3.3 V
T = 85°C
OUT(nom)
IN
A
T = 25°C
A
V
2.794
C
= C
= 1 mF,
T = 25°C
OUT(nom)
IN
IN
OUT
A
T = −40°C
A
C
= C
= 1 mF,
Active Mode
T = −40°C
A
IN
OUT
Low Power Mode
2.735
2.730
2.790
2.786
0
1
2
3
4
5
0
0
0
10
20
30
40
50
60
70
80
80
80
OUTPUT CURRENT (mA)
OUTPUT CURRENT (mA)
Figure 40. Output Voltage vs. Output Current
in Low Power Mode
Figure 41. Output Voltage vs. Output Current
in Active Mode
3.098
3.094
3.090
3.086
3.298
3.296
3.294
NCP171AMX330310TCG
NCP171AMX330310TCG
V
C
= 3.1 V, V = 3.6 V
V
C
= 3.3 V, V = 3.8 V
= 1 mF,
OUT(nom)
IN
OUT(nom)
= C
Active Mode
IN
= C
= 1 mF,
IN
OUT
IN
OUT
Low Power Mode
T = 85°C
T = 25°C
T = −40°C
A
3.292
A
A
T = 85°C
3.082
3.078
3.290
3.288
A
T = 25°C
A
T = −40°C
A
0
1
2
3
4
5
10
20
30
40
50
60
70
OUTPUT CURRENT (mA)
OUTPUT CURRENT (mA)
Figure 42. Output Voltage vs. Output Current
in Low Power Mode
Figure 43. Output Voltage vs. Output Current
in Active Mode
100
80
100
80
NCP171AMX180175TCG
NCP171AMX180175TCG
V
C
= 1.8 V,
= 1 mF,
OUT(nom)
= C
Active Mode
V
C
= 1.75 V,
= 1 mF,
OUT(nom)
IN
OUT
= C
IN
OUT
Low Power Mode
60
60
40
40
T = 85°C
T = 25°C
T = −40°C
T = 85°C
A
T = 25°C
T = −40°C
A
A
20
0
20
0
A
A
A
0
1
2
3
4
5
10
20
30
40
50
60
70
OUTPUT CURRENT (mA)
OUTPUT CURRENT (mA)
Figure 44. Dropout vs. Output Current in Low
Power Mode
Figure 45. Dropout vs. Output Current in
Active Mode
www.onsemi.com
13
NCP171
TYPICAL CHARACTERISTICS
25
20
15
10
70
NCP171AMX280275TCG
= 2.75 V,
NCP171AMX280275TCG
V = 2.8 V,
OUT(nom)
V
OUT(nom)
60
50
40
C
= C
= 1 mF,
C
= C
= 1 mF,
IN
OUT
IN
OUT
Low Power Mode
Active Mode
T = 85°C
T = 85°C
A
5
0
30
20
A
T = 25°C
T = 25°C
A
A
T = −40°C
A
T = −40°C
A
0
1
2
3
4
5
0
10
20
30
40
50
60
70
80
OUTPUT CURRENT (mA)
OUTPUT CURRENT (mA)
Figure 46. Dropout vs. Output Current in Low
Power Mode
Figure 47. Dropout vs. Output Current in
Active Mode
20
16
12
8
55
50
45
NCP171AMX330310TCG
NCP171AMX330310TCG
V
= 3.1 V,
OUT(nom)
V
= 3.1 V,
OUT(nom)
C
= C
= 1 mF,
IN
OUT
C
= C
= 1 mF,
IN
OUT
Low Power Mode
Active Mode
40
T = 85°C
T = 85°C
A
35
30
4
0
A
T = 25°C
T = 25°C
A
A
T = −40°C
A
T = −40°C
A
0
1
2
3
4
5
0
10
20
30
40
50
60
70
80
OUTPUT CURRENT (mA)
OUTPUT CURRENT (mA)
Figure 48. Dropout vs. Output Current in Low
Power Mode
Figure 49. Dropout vs. Output Current in
Active Mode
100
80
100
80
I
I
I
I
= 1 mA
OUT
OUT
OUT
OUT
NCP171AMX080075TCG
= 10 mA
= 50 mA
= 80 mA
V
V
= 0.75 V, C
= 1.8 V + 200 mVpp Modulation,
= 1 mF,
OUT(nom)
OUT
IN
Low Power Mode
60
60
40
40
NCP171AMX080075TCG
20
0
20
0
V
V
= 0.8 V, C
= 1.8 V + 200 mVpp Modulation,
= 1 mF,
OUT(nom)
OUT
I
I
= 1 mA
= 5 mA
OUT
OUT
IN
Active Mode
10
100
1K
10K
100K
1M
10M
10 100
1K
10K
100K
1M
10M
FREQUENCY (Hz)
FREQUENCY (Hz)
Figure 50. PSRR vs. Frequency in Low Power
Mode
Figure 51. PSRR vs. Frequency in Active Mode
www.onsemi.com
14
NCP171
TYPICAL CHARACTERISTICS
100
80
100
I
I
I
I
= 1 mA
NCP171AMX180175TCG
OUT
OUT
OUT
OUT
= 10 mA
= 50 mA
= 80 mA
V
V
= 1.75 V, C
= 2.8 V + 200 mVpp Modulation,
= 1 mF,
OUT(nom)
OUT
80
60
40
IN
Low Power Mode
60
40
NCP171AMX180175TCG
20
0
20
0
V
V
= 1.8 V, C
= 2.8 V + 200 mVpp Modulation,
= 1 mF,
OUT(nom)
OUT
I
I
= 1 mA
= 5 mA
OUT
OUT
IN
Active Mode
10
100
1K
10K
100K
1M
10M
10 100
1K
10K
100K
1M
10M
FREQUENCY (Hz)
FREQUENCY (Hz)
Figure 52. PSRR vs. Frequency in Low Power
Mode
Figure 53. PSRR vs. Frequency in Active Mode
100
80
100
80
I
I
I
I
= 1 mA
NCP171AMX280275TCG
OUT
OUT
OUT
OUT
= 10 mA
= 50 mA
= 80 mA
V
V
= 2.75 V, C
= 3.8 V + 200 mVpp Modulation,
= 1 mF,
OUT(nom)
OUT
IN
Low Power Mode
60
60
40
40
NCP171AMX280275TCG
20
0
20
0
V
V
= 2.8 V, C
= 3.8 V + 200 mVpp Modulation,
= 1 mF,
OUT(nom)
OUT
I
I
= 1 mA
= 5 mA
OUT
OUT
IN
Active Mode
10
100
1K
10K
100K
1M
10M
10
100
1K
10K
100K
1M
10M
FREQUENCY (Hz)
FREQUENCY (Hz)
Figure 54. PSRR vs. Frequency in Low Power
Mode
Figure 55. PSRR vs. Frequency in Active Mode
100
80
100
80
NCP171AMX330310TCG
I
I
I
I
= 1 mA
OUT
OUT
OUT
OUT
V
V
= 3.1 V, C
= 4.1 V + 200 mVpp Modulation,
= 1 mF,
= 10 mA
= 50 mA
= 80 mA
OUT(nom)
OUT
IN
Low Power Mode
60
60
40
40
NCP171AMX330310TCG
V
V
= 3.8 V, C
= 4.3 V + 200 mVpp Modulation,
= 1 mF,
20
0
20
0
OUT(nom)
OUT
I
I
= 1 mA
= 5 mA
OUT
OUT
IN
Active Mode
10
100
1K
10K
100K
1M
10M
10
100
1K
10K
100K
1M
10M
FREQUENCY (Hz)
FREQUENCY (Hz)
Figure 56. PSRR vs. Frequency in Low Power
Mode
Figure 57. PSRR vs. Frequency in Active Mode
www.onsemi.com
15
NCP171
TYPICAL CHARACTERISTICS
2.5
2.0
1.5
1.0
5
I
I
I
= 1 mA
= 10 mA
= 80 mA
NCP171AMX080075TCG
NCP171AMX180175TCG
OUT
OUT
OUT
V
= 0.8 V, V = 1.7 V
V
= 1.8 V, V = 2.8 V
OUT(nom)
IN
OUT(nom)
IN
C
= 1 mF, Active Mode
C
= 1 mF, Active Mode
4
3
2
OUT
OUT
10 Hz − 100 kHz, 67.72 mVrms
100 Hz − 100 kHz, 66.61 mVrms
10 Hz − 1 MHz, 107.9 mVrms
10 Hz − 100 kHz, 77.9 mVrms
100 Hz − 100 kHz, 74.7 mVrms
10 Hz − 1 MHz, 116.1 mVrms
10 Hz − 100 kHz, 55.41 mVrms
100 Hz − 100 kHz, 53.47 mVrms
10 Hz − 1 MHz, 132.76 mVrms
10 Hz − 100 kHz, 64.22 mVrms
100 Hz − 100 kHz, 60.3 mVrms
10 Hz − 1 MHz, 133.3 mVrms
10 Hz − 100 kHz, 53.36 mVrms
100 Hz − 100 kHz, 51.43 mVrms
10 Hz − 1 MHz, 153.62 mVrms
10 Hz − 100 kHz, 63.5 mVrms
100 Hz − 100 kHz, 59.8 mVrms
10 Hz − 1 MHz, 152.65 mVrms
I
= 1 mA
1
0
0.5
0
OUT
I
I
= 10 mA
= 80 mA
OUT
OUT
10
100
1K
10K
100K
1M
10
100
1K
10K
100K
1M
FREQUENCY (Hz)
FREQUENCY (Hz)
Figure 58. Noise vs. Frequency
Figure 59. Noise vs. Frequency
5
4
3
2
10
8
I
I
I
= 1 mA
= 10 mA
= 80 mA
NCP171AMX330310TCG
OUT
OUT
OUT
NCP171AMX280275TCG
V
= 3.3 V, V = 4.3 V
V
= 2.8 V, V = 3.8 V
OUT(nom)
IN
OUT(nom)
IN
C
= 1 mF, Active Mode
C
= 1 mF, Active Mode
OUT
OUT
10 Hz − 100 kHz, 84.7 mVrms
100 Hz − 100 kHz, 78.5 mVrms
10 Hz − 1 MHz, 119.6 mVrms
10 Hz − 100 kHz, 89.1 mVrms
100 Hz − 100 kHz, 81.2 mVrms
10 Hz − 1 MHz, 121.9 mVrms
6
4
10 Hz − 100 kHz, 77.5 mVrms
100 Hz − 100 kHz, 70.9 mVrms
10 Hz − 1 MHz, 136.6 mVrms
10 Hz − 100 kHz, 83.7 mVrms
100 Hz − 100 kHz, 75.2 mVrms
10 Hz − 1 MHz, 140.8 mVrms
10 Hz − 100 kHz, 78.1 mVrms
100 Hz − 100 kHz, 71.8 mVrms
10 Hz − 1 MHz, 155.3 mVrms
10 Hz − 100 kHz, 85.3 mVrms
100 Hz − 100 kHz, 77.4 mVrms
10 Hz − 1 MHz, 159.5 mVrms
1
0
2
0
I
= 1 mA
OUT
I
I
= 10 mA
= 80 mA
OUT
OUT
10
100
1K
10K
100K
1M
10
100
1K
10K
100K
1M
FREQUENCY (Hz)
FREQUENCY (Hz)
Figure 60. Noise vs. Frequency
Figure 61. Noise vs. Frequency
Figure 62. Line Transient Response in Low
Power Mode
Figure 63. Line Transient Response in Active
Mode
www.onsemi.com
16
NCP171
TYPICAL CHARACTERISTICS
Figure 64. Line Transient Response in Low
Figure 65. Line Transient Response in Active
Mode
Power Mode
Figure 66. Line Transient Response in Low
Power Mode
Figure 67. Line Transient Response in Active
Mode
Figure 68. Line Transient Response in Low
Power Mode
Figure 69. Line Transient Response in Active
Mode
www.onsemi.com
17
NCP171
TYPICAL CHARACTERISTICS
Figure 70. Load Transient Response in Low
Figure 71. Load Transient Response in Active
Mode
Power Mode
Figure 72. Load Transient Response in Low
Power Mode
Figure 73. Load Transient Response in Active
Mode
Figure 74. Load Transient Response in Low
Power Mode
Figure 75. Load Transient Response in Active
Mode
www.onsemi.com
18
NCP171
TYPICAL CHARACTERISTICS
Figure 76. Load Transient Response in Low
Figure 77. Load Transient Response in Active
Mode
Power Mode
Figure 78. Startup by Enable in Low Power
Mode
Figure 79. Startup by Enable in Low Power
Mode
Figure 80. Startup by Input Voltage in Low
Power Mode
Figure 81. Output Voltage vs. ECO Voltage
www.onsemi.com
19
NCP171
TYPICAL CHARACTERISTICS
Figure 82. Transition from Low Power Mode to
Active Mode
Figure 83. Transition from Active Mode to Low
Power Mode
ORDERING INFORMATION
Nominal Output
Voltage
Output Voltage
Offset
Active
Discharge
†
Device
Marking
JA
Package
XDFN4
XDFN4
XDFN4
XDFN4
XDFN4
XDFN4
XDFN4
XDFN4
XDFN4
XDFN4
XDFN4
XDFN4
Shipping
NCP171AMX080075TCG
NCP171AMX080060TCG
NCP171AMX100080TCG
NCP171AMX120100TCG
NCP171AMX165160TCG
NCP171AMX170165TCG
NCP171A3MX170165TCG
NCP171AMX180175TCG
NCP171AMX250245TCG
NCP171AMX280275TCG
NCP171AMX330325TCG
NCP171AMX330310TCG
0.8 V
0.8 V
1.0 V
1.2 V
1.65 V
1.7 V
1.7 V
1.8 V
2.5 V
2.8 V
3.3 V
3.3 V
50 mV
200 mV
200 mV
200 mV
50 mV
50 mV
50 mV
50 mV
50 mV
50 mV
50 mV
200 mV
Yes
3000 / Tape & Reel
3000 / Tape & Reel
3000 / Tape & Reel
3000 / Tape & Reel
3000 / Tape & Reel
3000 / Tape & Reel
3000 / Tape & Reel
3000 / Tape & Reel
3000 / Tape & Reel
3000 / Tape & Reel
3000 / Tape & Reel
3000 / Tape & Reel
JT
Yes
JP
Yes
JM
JL
Yes
Yes
JN
Yes
JQ
JU
Yes
Yes
JD
Yes
JH
Yes
JE
Yes
JF
Yes
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
www.onsemi.com
20
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
XDFN4 1.2x1.2, 0.8P
CASE 711BC
ISSUE O
1
DATE 15 SEP 2015
SCALE 4:1
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
A
B
E
D
DETAIL B
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED TERMINAL
AND IS MEASURED BETWEEN 0.15 AND
0.20 mm FROM THE TERMINAL TIPS.
4. COPLANARITY APPLIES TO THE EXPOSED
PAD AS WELL AS THE TERMINALS.
PIN ONE
REFERENCE
MILLIMETERS
DETAIL B
DIM MIN
0.35
A1 0.00
MAX
0.45
0.05
ALTERNATE
A
TOP VIEW
A3
CONSTRUCTION
A3
b
0.13 REF
SIDE VIEW
A
0.25
0.35
0.25
1.25
0.68
1.25
0.68
0.05
C
C
b1 0.15
1.15
D2 0.58
1.15
E2 0.58
4X
(0.12)
A1
D
4X (0.12)
0.05
E
SEATING
NOTE 4
C
PLANE
SIDE VIEW
D2
e
L
0.80 BSC
0.25
0.35
0.23
4X b
L1 0.13
M
0.05
C A B
e/2
4X
L
GENERIC
MARKING DIAGRAM*
NOTE 3
e
1
2
DETAIL A
E2
L1
XXM
1
3
4
XX = Specific Device Code
b1
BOTTOM VIEW
DETAIL A
M
= Date Code
*This information is generic. Please refer
to device data sheet for actual part
marking.
RECOMMENDED
MOUNTING FOOTPRINT*
4X
Pb−Free indicator, “G” or microdot “ G”,
PACKAGE
OUTLINE
1.50
C 0.195
0.22
may or may not be present.
0.25
4X
0.35
0.80 PITCH
1
2X
0.63
4X
0.48
455
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
DOCUMENT NUMBER:
DESCRIPTION:
98AON04908G
XDFN4, 1.2X1.2, 0.8P
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative
ON Semiconductor Website: www.onsemi.com
◊
www.onsemi.com
相关型号:
©2020 ICPDF网 联系我们和版权申明