NCP4620HSQ18T1G [ONSEMI]
150 mA, 10 V, Low Dropout Regulator; 150毫安, 10 V ,低压差稳压器型号: | NCP4620HSQ18T1G |
厂家: | ONSEMI |
描述: | 150 mA, 10 V, Low Dropout Regulator |
文件: | 总16页 (文件大小:376K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
NCP4620
150 mA, 10 V, Low Dropout
Regulator
The NCP4620 is a CMOS Linear voltage regulator with 150 mA
output current capability. The device is capable of operating with input
voltages up to 10 V, with high output voltage accuracy and low
temperature−drift coefficient. The NCP4620 is easy to use, with
output current fold−back protection and a thermal shutdown circuit
included. A Chip Enable function is included to save power by
lowering supply current.
http://onsemi.com
MARKING
DIAGRAMS
Features
XXX
• Operating Input Voltage Range: 2.6 V to 10 V
• Output Voltage Range: 1.2 V to 6.0 V (available in 0.1 V steps)
• Output Voltage Accuracy: 1.0%
• Low Supply Current: 23 mA
XMM
SC−70
CASE 419A
1
• Low Dropout: 165 mV (I
= 100 mA, V
= 3.3 V)
OUT
OUT
400 mV (I
= 150 mA, V
= 2.8 V)
OUT
OUT
XXXMM
SOT−23−5
CASE 1212
• High PSRR: 70 dB at 1 kHz
1
• Line Regulation 0.02%/V Typ
• Current Fold Back Protection
• Thermal Shutdown Protection
• Stable with Ceramic Capacitors
XXXX, XXX= Specific Device Code
MM = Date Code
• Available in SC−70 and SOT23 Packages
• These are Pb−Free Devices*
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 14 of this data sheet.
Typical Applications
• Battery products powered by 2 Lithium Ion cells
• Networking and Communication Equipment
• Cameras, DVRs, STB and Camcorders
• Toys, industrial applications
NCP4620x
VIN
VOUT
VIN
VOUT
C1
1m
C 2
1m
CE
GND
Figure 1. Typical Application Schematic
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2012
1
Publication Order Number:
May, 2012 − Rev. 4
NCP4620/D
NCP4620
VIN
VIN
VOUT
VOUT
Vref
Vref
Current Limit
Thermal Shutdown
Current Limit
Thermal Shutdown
CE
CE
GND
GND
NCP4620Hxxxx
NCP4620Dxxxx
Figure 2. Simplified Schematic Block Diagram
PIN FUNCTION DESCRIPTION
Pin No.
SC−70
Pin No.
SOT23
Pin Name
VIN
Description
5
3
1
4
2
1
2
3
5
4
Input pin
GND
CE
Ground
Chip enable pin (Active “H”)
Output pin
VOUT
NC
No connection
ABSOLUTE MAXIMUM RATINGS
Rating
Symbol
Value
12.0
Unit
Input Voltage (Note 1)
V
IN
V
V
Output Voltage
V
OUT
−0.3 to VIN + 0.3
12.0
Chip Enable Input
V
CE
V
Output Current
I
165
mA
mW
OUT
Power Dissipation − SC−70
Power Dissipation − SOT23
Operating Temperature
P
D
380
420
T
A
−40 to +85
+150
°C
°C
°C
V
Maximum Junction Temperature
Storage Temperature
T
J
T
−55 to +125
2000
STG
ESD Capability, Human Body Model (Note 2)
ESD Capability, Machine Model (Note 2)
ESDHBM
ESDMM
200
V
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. Refer to ELECTRICAL CHARACTERISTIS and APPLICATION INFORMATION for Safe Operating Area.
2. This device series incorporates ESD protection and is tested by the following methods:
ESD Human Body Model tested per AEC−Q100−002 (EIA/JESD22−A114)
ESD Machine Model tested per AEC−Q100−003 (EIA/JESD22−A115)
Latchup Current Maximum Rating tested per JEDEC standard: JESD78.
http://onsemi.com
2
NCP4620
THERMAL CHARACTERISTICS
Rating
Symbol
Value
Unit
Thermal Characteristics, SOT23
RqJA
238
°C/W
Thermal Resistance, Junction−to−Air
Thermal Characteristics, SC−70
Thermal Resistance, Junction−to−Air
RqJA
263
°C/W
ELECTRICAL CHARACTERISTICS −40°C ≤ T ≤ 85°C; V = V
+ 1 V; I
= 1 mA, C = C
= 0.47 mF, unless
A
IN
OUT(NOM)
OUT
IN
OUT
otherwise noted. Typical values are at T = +25°C.
A
Parameter
Test Conditions
Symbol
Min
Typ
Max
Unit
Operating Input Voltage
V
IN
2.6
10
V
Output Voltage
T
A
= +25°C
V
OUT
V
OUT
> 1.5 V
≤ 1.5 V
V
OUT
x0.99
−15
x1.01
15
V
mV
−40°C ≤ T ≤ 85°C
V
OUT
V
OUT
> 1.5 V
≤ 1.5 V
x0.974
−40
x1.023
35
V
mV
A
Output Voltage Temp. Coeffi-
cient
−40°C ≤ T ≤ 85°C
80
0.02
5
ppm/°C
A
Line Regulation
V
+ 0.5 V or 2.6 V (whichever is higher)
Line
0.2
40
%/V
OUT(NOM)
Reg
≤ V ≤ 10 V
IN
Load Regulation
Dropout Voltage
I
= 0.1 mA to 150 mA
Load
mV
V
OUT
Reg
I
= 150 mA
1.2 V ≤ V
1.3 V ≤ V
1.5 V ≤ V
1.8 V ≤ V
2.3 V ≤ V
3.0 V ≤ V
4.0 V ≤ V
< 1.3 V
< 1.5 V
< 1.8 V
< 2.3 V
< 3.0 V
< 4.0 V
< 6.0 V
V
DO
1.40
1.30
1.10
0.80
0.58
0.48
0.40
OUT
OUT
OUT
OUT
OUT
OUT
OUT
OUT
0.40
0.30
0.25
Output Current
I
I
150
1.7
mA
mA
mA
mA
V
OUT
Short Current Limit
Quiescent Current
Standby Current
V
= 0 V
I
40
23
OUT
SC
I
Q
40
V
IN
= 10 V, V = 0 V, T = 25°C
0.1
1.0
CE
A
STB
CE Pin Threshold Voltage
CE Input Voltage “H”
CE Input Voltage “L”
V
CEH
V
0.8
CEL
CE Pull Down Current
I
0.3
70
mA
CEPD
Power Supply Rejection Ratio
V
IN
= V
IN
+ 1 V or 3.0 V whichever is higher,
pk−pk OUT
PSRR
dB
OUT
DV = 0.2 V
, I
= 30 mA, f = 1 kHz
Output Noise Voltage
f = 10 Hz to 100 kHz, I
= 30 mA, V
=
V
N
90
mV
rms
OUT
OUT
1.5 V, V = 2.6 V
IN
Low Output N−ch Tr. On Resist-
ance
V
IN
= 7 V, V = 0 V
R
LOW
250
W
CE
Thermal Shutdown Temperature
Thermal Shutdown Release
T
165
110
°C
°C
TSD
T
TSR
http://onsemi.com
3
NCP4620
TYPICAL CHARACTERISTICS
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
3.5
3.0
V
= 2.6 V
IN
V
= 3.5 V
IN
2.8 V
3.7 V
3.0 V
4.0 V
2.5
2.0
1.5
1.0
0.5
0.0
4.0 V
5.0 V
0
50
100
150
(mA)
200
250
0
50
100
150
(mA)
OUT
200
250
300
I
I
OUT
Figure 3. Output Voltage vs. Output Current
Figure 4. Output Voltage vs. Output Current
1.5 V Version (TJ = 255C)
3.3 V Version (TJ = 255C)
6.0
5.0
4.0
3.0
2.0
1.0
0.0
V
= 5.2 V
IN
5.4 V
6.0 V
7.0 V
0
50
100
150
(mA)
200
250
300
I
OUT
Figure 5. Output Voltage vs. Output Current
5.0 V Version (TJ = 255C)
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0.00
0.40
0.35
0.30
0.25
0.20
0.15
T = 25°C
J
T = 25°C
J
85°C
85°C
0.10
0.05
0.00
−40°C
−40°C
0
50
100
150
0
50
100
150
I
(mA)
I
(mA)
OUT
OUT
Figure 6. Dropout Voltage vs. Output Current
3.3 V Version
Figure 7. Dropout Voltage vs. Output Current
5.0 V Version
http://onsemi.com
4
NCP4620
TYPICAL CHARACTERISTICS
1.55
1.54
1.53
1.52
1.51
1.50
1.49
1.48
1.47
1.46
1.45
3.35
V
IN
= 2.6 V
V
IN
= 4.3 V
3.34
3.33
3.32
3.31
3.30
3.29
3.28
3.27
3.26
3.25
−40
−20
0
20
40
60
80
−40
−20
0
20
40
60
80
T , JUNCTION TEMPERATURE (°C)
J
T , JUNCTION TEMPERATURE (°C)
J
Figure 8. Output Voltage vs. Temperature,
1.5 V Version
Figure 9. Output Voltage vs. Temperature,
3.3 V Version
5.10
5.08
5.06
5.04
5.02
5.00
4.98
4.96
4.94
4.92
4.90
40
35
30
25
20
15
10
5
V
IN
= 6.0 V
V
= 5 V
OUT
3.3 V
1.5 V
0
−40
−20
0
20
40
60
80
0
2
4
6
8
10
T , JUNCTION TEMPERATURE (°C)
J
V , INPUT VOLTAGE (V)
IN
Figure 10. Output Voltage vs. Temperature,
5.0 V Version
Figure 11. Supply Current vs. Input Voltage
30
25
20
15
10
5
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
1 mA
V
= 5 V
3.3 V
1.5 V
OUT
20 mA
50 mA
100 mA
I
= 150 mA
OUT
0
−40
−20
0
20
40
60
80
0
1
2
3
4
5
6
7
8
9
10
T , JUNCTION TEMPERATURE (°C)
J
V , INPUT VOLTAGE (V)
IN
Figure 12. Supply Current vs. Temperature
Figure 13. Output Voltage vs. Input Voltage,
1.5 V Version
http://onsemi.com
5
NCP4620
TYPICAL CHARACTERISTICS
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
6.0
5.0
4.0
3.0
2.0
1 mA
20 mA
50 mA
20 mA
50 mA
100 mA
= 150 mA
100 mA
= 150 mA
1 mA
1.0
I
OUT
I
OUT
0.0
0
1
2
3
4
5
6
7
8
9
10
0
1
2
3
4
5
6
7
8
9
10
1000
1000
V
IN
, INPUT VOLTAGE (V)
V , INPUT VOLTAGE (V)
IN
Figure 14. Output Voltage vs. Input Voltage,
3.3 V Version
Figure 15. Output Voltage vs. Input Voltage,
5.0 V Version
120
100
80
60
40
20
0
120
100
80
60
40
20
0
I
= 100 mA
OUT
30 mA
1 mA
30 mA
1 mA
I
= 100 mA
OUT
0.01
0.1
1
10
100
1000
0.01
0.1
1
10
100
FREQUENCY (kHz)
FREQUENCY (kHz)
Figure 16. PSRR, 1.5 V Version, VIN = 3.5 V
Figure 17. PSRR, 3.3 V Version, VIN = 5.3 V
3.0
120
2.5
2.0
1.5
1.0
0.5
0
100
80
60
40
20
0
30 mA
1 mA
I
= 100 mA
OUT
0.01
0.1
1
10
100
1000
0.01
0.1
1
10
100
FREQUENCY (kHz)
FREQUENCY (kHz)
Figure 18. PSRR, 5.0 V Version, VIN = 7.0 V
Figure 19. Output Voltage Noise, 1.5 V Version,
IN = 2.6 V, IOUT = 30 mA
V
http://onsemi.com
6
NCP4620
TYPICAL CHARACTERISTICS
10
9.0
8.0
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0
25
20
15
10
5
0
0.01
0.1
1
10
100
1000
0.01
0.1
1
10
100
1000
FREQUENCY (kHz)
FREQUENCY (kHz)
Figure 20. Output Voltage Noise, 3.3 V Version,
Figure 21. Output Voltage Noise, 5.0 V Version,
V
IN = 4.3 V, IOUT = 30 mA
V
IN = 6.0 V, IOUT = 30 mA
4.0
3.5
3.0
2.5
1.51
1.50
1.49
1.48
1.47
0
10 20 30 40 50 60 70 80 90 100
t (ms)
Figure 22. Line Transients, 1.5 V Version,
tR = tF = 5 ms, IOUT = 30 mA
5.8
5.3
4.8
4.3
3.31
3.30
3.29
3.28
3.27
0
10 20 30 40 50 60 70 80 90 100
t (ms)
Figure 23. Line Transients, 3.3 V Version,
tR = tF = 5 ms, IOUT = 30 mA
http://onsemi.com
7
NCP4620
TYPICAL CHARACTERISTICS
7.5
7.0
6.5
6.0
5.01
5.00
4.99
4.98
4.97
0
10 20 30 40 50 60 70 80 90 100
t (ms)
Figure 24. Line Transients, 5.0 V version,
tR = tF = 5 ms, IOUT = 30 mA
125
100
75
50
25
0
1.54
1.52
1.50
1.48
1.46
1.44
1.42
0
20 40 60 80 100 120 140 160 180 200
t (ms)
Figure 25. Load Transients, 1.5 V Version,
IOUT = 50 – 100 mA, tR = tF = 0.5 ms, VIN = 2.6 V
125
100
75
50
25
0
3.36
3.34
3.32
3.30
3.28
3.26
3.24
3.22
0
20 40 60 80 100 120 140 160 180 200
t (ms)
Figure 26. Load Transients, 3.3 V Version,
OUT = 50 – 100 mA, tR = tF = 0.5 ms, VIN = 4.3 V
I
http://onsemi.com
8
NCP4620
TYPICAL CHARACTERISTICS
125
100
75
50
25
0
5.10
5.05
5.00
4.95
4.90
4.85
4.80
0
20 40 60 80 100 120 140 160 180 200
t (ms)
Figure 27. Load Transients, 5.0 V Version,
IOUT = 50 – 100 mA, tR = tF = 0.5 ms, VIN = 6.0 V
45
30
15
0
1.54
1.52
1.50
1.48
1.46
1.44
1.42
0
20 40 60 80 100 120 140 160 180 200
t (ms)
Figure 28. Load Transients, 1.5 V Version,
IOUT = 1 – 30 mA, tR = tF = 0.5 ms, VIN = 2.6 V
45
30
15
0
3.34
3.32
3.30
3.28
3.26
3.24
3.22
0
20 40 60 80 100 120 140 160 180 200
t (ms)
Figure 29. Load Transients, 3.3 V Version,
OUT = 1 – 30 mA, tR = tF = 0.5 ms, VIN = 4.3 V
I
http://onsemi.com
9
NCP4620
TYPICAL CHARACTERISTICS
45
30
15
0
5.04
5.02
5.00
4.98
4.96
4.94
4.92
0
20 40 60 80 100 120 140 160 180 200
t (ms)
Figure 30. Load Transients, 5.0 V Version,
IOUT = 1 – 30 mA, tR = tF = 0.5 ms, VIN = 6.0 V
200
150
100
50
1.8
1.7
1.6
1.5
1.4
1.3
1.2
0
0
50 100 150 200 250 300 350 400 450 500
t (ms)
Figure 31. Load Transients, 1.5 V Version,
IOUT = 1 – 150 mA, tR = tF = 0.5 ms, VIN = 2.6 V
200
150
100
50
0
3.5
3.4
3.3
3.2
3.1
3.0
0
50 100 150 200 250 300 350 400 450 500
t (ms)
Figure 32. Load Transients, 3.3 V Version,
OUT = 1 – 150 mA, tR = tF = 0.5 ms, VIN = 3.8 V
I
http://onsemi.com
10
NCP4620
TYPICAL CHARACTERISTICS
200
150
100
50
5.6
5.4
5.2
5.0
4.8
4.6
4.4
0
0
50 100 150 200 250 300 350 400 450 500
t (ms)
Figure 33. Load Transients, 5.0 V Version,
OUT = 1 – 150 mA, tR = tF = 0.5 ms, VIN = 6.0 V
I
3
Chip Enable
2
1
0
2.0
1.5
1.0
0.5
0
I
= 30 mA
OUT
I
= 150 mA
OUT
I
= 1 mA
OUT
−0.5
0
20 40 60 80 100 120 140 160 180 200
t (ms)
Figure 34. Start−up, 1.5 V Version, VIN = 2.6 V
6
4
2
0
Chip Enable
4.0
3.0
2.0
1.0
0
I
= 30 mA
OUT
I
= 150 mA
OUT
I
= 1 mA
OUT
−1.0
0
20 40 60 80 100 120 140 160 180 200
t (ms)
Figure 35. Start−up, 3.3 V Version, VIN = 4.3 V
http://onsemi.com
11
NCP4620
TYPICAL CHARACTERISTICS
9
6
3
0
Chip Enable
4.0
3.0
2.0
1.0
0
I
= 30 mA
OUT
I
= 150 mA
OUT
I
= 1 mA
OUT
−1.0
0
20 40 60 80 100 120 140 160 180 200
t (ms)
Figure 36. Start−up, 5.0 V Version, VIN = 6.0 V
6
4
2
Chip Enable
0
4.0
3.0
2.0
1.0
0
I
= 30 mA
OUT
I
= 1 mA
OUT
I
= 150 mA
OUT
−1.0
0
200 400 600 800 1000 1200 1400 1600 1800 2000
t (ms)
Figure 37. Shutdown, 3.3 V Version D,
V
IN = 4.3 V
http://onsemi.com
12
NCP4620
APPLICATION INFORMATION
Enable Operation
A typical application circuit for NCP4620 series is shown
in Figure 38.
The enable pin CE may be used for turning the regulator
on and off. The IC is switched on when a high level voltage
is applied to the CE pin. The enable pin has an internal pull
down current source. If the enable function is not needed
connect CE pin to VIN.
NCP4620x
VIN
VOUT
VIN
VOUT
C1
1m
C2
1m
CE
Output Discharger
GND
The D version includes a transistor between VOUT and
GND that is used for faster discharging of the output
capacitor. This function is activated when the IC goes into
disable mode.
Thermal
Figure 38. Typical Application Schematic
As a power across the IC increase, it might become
necessary to provide some thermal relief. The maximum
power dissipation supported by the device is dependent
upon board design and layout. Mounting pad configuration
on the PCB, the board material, and also the ambient
temperature affect the rate of temperature increase for the
part. When the device has good thermal conductivity
through the PCB the junction temperature will be relatively
low in high power dissipation applications.
Input Decoupling Capacitor (C1)
A 1 mF ceramic input decoupling capacitor should be
connected as close as possible to the input and ground pin of
the NCP4620. Higher values and lower ESR improves line
transient response.
Output Decoupling Capacitor (C2)
A 1 mF ceramic output decoupling capacitor is enough to
achieve stable operation of the IC. If a tantalum capacitor is
used, and its ESR is high, loop oscillation may result. The
capacitors should be connected as close as possible to the
output and ground pins. Larger values and lower ESR
improves dynamic parameters.
PCB layout
Make the VIN and GND line as large as practical. If their
impedance is high, noise pickup or unstable operation may
result. Connect capacitors C1 and C2 as close as possible to
the IC, and make wiring as short as possible.
http://onsemi.com
13
NCP4620
ORDERING INFORMATION
Nominal Output
†
Voltage
Device
Description
Marking
Package
Shipping
NCP4620DSN15T1G
1.5 V
Auto discharge
JBE
SOT−23
3000 / Tape & Reel
3000 / Tape & Reel
3000 / Tape & Reel
3000 / Tape & Reel
3000 / Tape & Reel
3000 / Tape & Reel
3000 / Tape & Reel
3000 / Tape & Reel
3000 / Tape & Reel
3000 / Tape & Reel
3000 / Tape & Reel
3000 / Tape & Reel
(Pb−Free)
NCP4620DSN30T1G
NCP4620DSN33T1G
NCP4620DSN50T1G
NCP4620HSN15T1G
NCP4620HSN33T1G
NCP4620HSN50T1G
NCP4620DSQ18T1G
NCP4620HSQ12T1G
NCP4620HSQ15T1G
NCP4620HSQ18T1G
NCP4620HSQ25T1G
3.0 V
3.3 V
5.0 V
1.5 V
3.3 V
5.0 V
1.8 V
1.2 V
1.5 V
1.8 V
2.5 V
Auto discharge
Auto discharge
Auto discharge
Standard
JBX
SOT−23
(Pb−Free)
KBA
KBT
SOT−23
(Pb−Free)
SOT−23
(Pb−Free)
JAE
SOT−23
(Pb−Free)
Standard
KAA
KAT
SOT−23
(Pb−Free)
Standard
SOT−23
(Pb−Free)
Auto discharge
Standard
AD08
AC01
AC05
AC08
AC16
SC−70
(Pb−Free)
SC−70
(Pb−Free)
Standard
SC−70
(Pb−Free)
Standard
SC−70
(Pb−Free)
Standard
SC−70
(Pb−Free)
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*To order other package and voltage variants, please contact your ON Semiconductor sales representative.
http://onsemi.com
14
NCP4620
PACKAGE DIMENSIONS
SC−88A (SC−70−5/SOT−353)
CASE 419A−02
ISSUE K
A
NOTES:
1. DIMENSIONING AND TOLERANCING
PER ANSI Y14.5M, 1982.
G
2. CONTROLLING DIMENSION: INCH.
3. 419A−01 OBSOLETE. NEW STANDARD
419A−02.
4. DIMENSIONS A AND B DO NOT INCLUDE
MOLD FLASH, PROTRUSIONS, OR GATE
BURRS.
5
4
3
−B−
S
INCHES
DIM MIN MAX
MILLIMETERS
MIN
1.80
1.15
0.80
0.10
MAX
2.20
1.35
1.10
0.30
1
2
A
B
C
D
G
H
J
0.071
0.045
0.031
0.004
0.087
0.053
0.043
0.012
0.026 BSC
0.65 BSC
M
M
B
D 5 PL
0.2 (0.008)
---
0.004
0.004
0.004
0.010
0.012
---
0.10
0.10
0.10
0.25
0.30
K
N
S
N
0.008 REF
0.20 REF
0.079
0.087
2.00
2.20
J
C
K
H
http://onsemi.com
15
NCP4620
PACKAGE DIMENSIONS
SOT−23 5−LEAD
CASE 1212
ISSUE A
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSIONS: MILLIMETERS.
3. DATUM C IS THE SEATING PLANE.
A
A2
B
A
D
S
A1
0.05
MILLIMETERS
5
1
4
DIM MIN
MAX
1.45
0.10
1.30
0.50
0.25
3.10
3.10
1.80
E
L
A
A1
A2
b
---
0.00
1.00
0.30
0.10
2.70
2.50
1.50
2
3
E1
5X b
L1
C
c
M
S
S
A
D
0.10
C B
e
C
E
E1
e
0.95 BSC
L
0.20
0.45
---
0.75
RECOMMENDED
SOLDERING FOOTPRINT*
L1
5X
0.85
3.30
5X
0.56
0.95
PITCH
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
For additional information, please contact your local
Sales Representative
NCP4620/D
相关型号:
©2020 ICPDF网 联系我们和版权申明