NCP707CMX180TBG [ONSEMI]
Low Noise, Low Dropout Regulator;型号: | NCP707CMX180TBG |
厂家: | ONSEMI |
描述: | Low Noise, Low Dropout Regulator 光电二极管 输出元件 调节器 |
文件: | 总19页 (文件大小:856K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
NCP707
200 mA, Very-Low
Quiescent Current, IQ 25 mA,
Low Noise, Low Dropout
Regulator
www.onsemi.com
The NCP707 is 200 mA LDO that provides the engineer with a very
stable, accurate voltage with very low noise suitable for space
constrained, noise sensitive applications. In order to optimize
performance for battery operated portable applications, the NCP707
MARKING
DIAGRAM
1
employs the dynamic quiescent current adjustment for very low I
consumption at no−load.
Q
XDFN4
MX SUFFIX
CASE 711AJ
XX M
1
Features
• Operating Input Voltage Range: 1.8 V to 5.5 V
XX = Specific Device Code
= Date Code
• Available in Fixed Voltage Options: 1.5 V to 3.3 V
M
Contact Factory for Other Voltage Options
• Very Low Quiescent Current of Typ. 25 mA
PIN CONNECTIONS
• Very Low Noise: 22 mV
from 100 Hz to 100 kHz
RMS
• Very Low Dropout: 100 mV Typical at 200 mA
2% Accuracy Over Load/Line/Temperature
IN
4
EN
3
•
• High Power Supply Ripple Rejection: 70 dB at 1 kHz
• Thermal Shutdown and Current Limit Protections
• Stable with a 1 mF Ceramic Output Capacitor
• Available in XDFN 1.0 x 1.0 mm Package
EPAD
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
1
2
Compliant
OUT
GND
(Top View)
Typical Applicaitons
• PDAs, Mobile phones, GPS, Smartphones
• Wireless Handsets, Wireless LAN, Bluetooth®, Zigbee®
• Portable Medical Equipment
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 18 of this data sheet.
• Other Battery Powered Applications
V
V
IN
C
OUT
IN
OUT
NCP707
GND
C
1 mF
Ceramic
IN
OUT
EN
ON
OFF
Figure 1. Typical Application Schematic
© Semiconductor Components Industries, LLC, 2015
1
Publication Order Number:
April, 2017 − Rev. 9
NCP707/D
NCP707
IN
ENABLE
LOGIC
THERMAL
EN
SHUTDOWN
VOLTAGE
REFERENCE
MOSFET
DRIVER WITH
CURRENT LIMIT
OUT
AUTO LOW
POWER MODE
ACTIVE
DISCHARGE*
EN
GND
*Active output discharge function is present only in NCP707AMXyyyTCG and NCP707CMXyyyTCG devices.
yyy denotes the particular V option.
OUT
Figure 2. Simplified Schematic Block Diagram
PIN FUNCTION DESCRIPTION
Pin No.
Pin Name
Description
1
OUT
Regulated output voltage pin. A small ceramic capacitor with minimum value of 1 mF is needed from this
pin to ground to assure stability.
2
3
GND
EN
Power supply ground.
Driving EN over 0.9 V turns on the regulator. Driving EN below 0.4 V puts the regulator into shutdown
mode.
4
−
IN
Input pin. A small 1 mF capacitor is needed from this pin to ground to assure stability.
EPAD
Exposed pad should be connected directly to the GND pin. Soldered to a large ground copper plane allows
for effective heat removal.
ABSOLUTE MAXIMUM RATINGS
Rating
Symbol
VIN
Value
Unit
V
Input Voltage (Note 1)
−0.3 V to 6 V
Output Voltage
VOUT
VEN
−0.3 V to VIN + 0.3 V
V
Enable Input
−0.3 V to VIN + 0.3 V
V
Output Short Circuit Duration
Maximum Junction Temperature
Storage Temperature
tSC
∞
150
s
TJ(MAX)
TSTG
°C
°C
V
−55 to 150
2000
ESD Capability, Human Body Model (Note 2)
ESD Capability, Machine Model (Note 2)
ESDHBM
ESDMM
200
V
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. Refer to ELECTRICAL CHARACTERISTIS and APPLICATION INFORMATION for Safe Operating Area.
2. This device series incorporates ESD protection and is tested by the following methods:
ESD Human Body Model tested per EIA/JESD22−A114
ESD Machine Model tested per EIA/JESD22−A115
Latchup Current Rating tested per JEDEC standard: JESD78
THERMAL CHARACTERISTICS
Rating
Symbol
Value
Unit
Thermal Characteristics, XDFN4 1x1 mm
R
250
°C/W
q
JA
Thermal Resistance, Junction−to−Air
3. Single component mounted on 2 oz, FR4 PCB with 100 mm Cu area.
2
www.onsemi.com
2
NCP707
ELECTRICAL CHARACTERISTICS
−40°C ≤ T ≤ 125°C; V = V
+ 0.5 V or 1.9 V, whichever is greater; I
= 10 mA, C = C
= 1 mF, unless otherwise noted.
J
IN
OUT(NOM)
OUT
IN
OUT
V
EN
= 0.9 V. Typical values are at T = +25°C. Min./Max. are for T = −40°C and T = +125°C respectively (Note 4).
J
J
J
Parameter
Test Conditions
Symbol
Min
1.8
−2
Typ
Max
5.5
+2
Unit
V
Operating Input Voltage
Output Voltage Accuracy
Line Regulation
V
IN
VOUT + 0.5 V ≤ VIN ≤ 5.5 V, IOUT = 0 − 200 mA
VOUT + 0.5 V ≤ VIN ≤ 5.5 V, IOUT = 10 mA
IOUT = 0 mA to 200 mA
V
OUT
%
Reg
400
10
mV/V
mV/mA
mV
LINE
LOAD
LOAD
Load Regulation
Reg
Load Transient
I
= 1 mA to 200 mA or 200 mA to 1 mA in
Tran
75
OUT
1 ms, C
= 1 mF
OUT
V
V
= 1.5 V
= 1.8 V
= 1.85 V
= 2.5 V
= 2.8 V
= 2.85 V
= 3.0 V
= 3.1 V
= 3.2 V
= 3.3 V
415
221
218
135
118
114
111
107
105
100
379
25
490
380
370
225
175
170
165
160
155
150
500
35
OUT
OUT
OUT
V
V
OUT
OUT
OUT
V
Dropout Voltage (Note 5)
I
= 200 mA
V
mV
OUT
DO
V
V
OUT
OUT
OUT
OUT
V
V
V
Output Current Limit
V
OUT
= 90% V
I
CL
250
mA
mA
mA
mA
mA
V
OUT(nom)
IOUT = 0 mA
IOUT = 2 mA
I
Q
I
I
105
240
0.01
Ground Current
GND
GND
IOUT = 200 mA
VEN ≤ 0.4 V, VIN = 5.5 V
Shutdown Current
I
1
DIS
EN Pin Threshold Voltage
High Threshold
Low Threshold
V
Voltage increasing
Voltage decreasing
0.9
EN
EN_HI
V
EN
0.4
EN Pin Input Current
Turn−on Time
VEN = 5.5 V
I
180
200
500
nA
EN
C
= 1.0 mF, From assertion of V to 98%
t
ms
OUT
EN
ON
V
OUT(NOM)
Power Supply Rejection Ratio
Output Noise Voltage
V
= 3.6 V, V
= 3.1 V
f = 100 Hz
f = 1 kHz
f = 10 kHz
PSRR
58
70
55
dB
IN
OUT
I
= 150 mA
OUT
V
= 3.1 V, V = 3.6 V, I
= 200 mA
V
N
22
mV
rms
OUT
IN
OUT
f = 100 Hz to 100 kHz
Thermal Shutdown Temperature
Thermal Shutdown Hysteresis
Temperature increasing from T = +25°C
T
160
20
°C
J
SD
Temperature falling from T
T
SDH
°C
SD
Active Output Discharge Resist-
ance
VEN < 0.4 V, Version A only
VEN < 0.4 V, Version C only
R
1.2
120
kW
W
DIS
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
4. Performance guaranteed over the indicated operating temperature range by design and/or characterization. Production tested at
T = T = 25°C. Low duty cycle pulse techniques are used during testing to maintain the junction temperature as close to ambient as possible.
J
A
5. Characterized when VOUT falls 100 mV below the regulated voltage at VIN = VOUT(NOM) + 0.5 V.
www.onsemi.com
3
NCP707
1.510
1.505
1.500
1.495
1.490
1.485
1.480
1.860
1.855
1.850
1.845
1.840
1.835
1.830
I
I
= 10 mA
OUT
I
= 10 mA
OUT
= 200 mA
OUT
I
OUT
C
V
= C
= 1 mF
C
= C
= 1 mF
IN
OUT
IN
OUT
V
IN
= 2.0 V
V
= 2.35 V
IN
OUT(NOM)
= 1.5 V
V
= 1.85 V
OUT(NOM)
−40 −20
0
20
40
60
80 100
120 140
−40 −20
0
20
40 60
80 100 120 140
JUNCTION TEMPERATURE (°C)
JUNCTION TEMPERATURE (°C)
Figure 3. Output Voltage vs. Temperature
Figure 4. Output Voltage vs. Temperature
VOUT = 1.85 V
V
OUT = 1.5 V
2.870
2.865
2.860
2.855
2.850
2.845
2.840
3.000
2.995
2.990
2.985
2.980
2.975
2.970
C
= C
= 1 mF
IN
OUT
V
= 3.35 V
IN
OUT(NOM)
V
= 2.85 V
I
I
= 10 mA
OUT
= 200 mA
OUT
I
I
= 10 mA
OUT
= 200 mA
OUT
C
= C
V
= 1 mF
IN
OUT
= 3.5 V
IN
OUT(NOM)
V
= 3.0 V
−40 −20
0
20
40
60
80 100
120 140
−40 −20
0
20
40 60
80 100 120 140
JUNCTION TEMPERATURE (°C)
JUNCTION TEMPERATURE (°C)
Figure 5. Output Voltage vs. Temperature
OUT = 2.85 V
Figure 6. Output Voltage vs. Temperature
VOUT = 3.0 V
V
3.110
3.105
3.100
3.095
3.090
3.085
3.080
3.300
3.295
3.290
3.285
3.280
3.275
3.270
C
= C
V
= 1 mF
= 3.6 V
IN
OUT
IN
OUT(NOM)
V
= 3.1 V
I
I
= 10 mA
OUT
I
I
= 10 mA
OUT
= 200 mA
OUT
= 200 mA
OUT
C
= C
V
= 1 mF
= 3.8 V
IN
OUT
IN
OUT(NOM)
V
= 3.3 V
−40 −20
0
20
40
60
80 100
120 140
−40 −20
0
20
40 60
80 100 120 140
JUNCTION TEMPERATURE (°C)
JUNCTION TEMPERATURE (°C)
Figure 7. Output Voltage vs. Temperature
OUT = 3.1 V
Figure 8. Output Voltage vs. Temperature
VOUT = 3.3 V
V
www.onsemi.com
4
NCP707
35
30
25
20
15
10
5
35
30
25
20
15
10
5
T = 125°C
T = 125°C
A
A
T = 25°C
A
T = 25°C
A
T = −40°C
A
T = −40°C
A
C
V
= C
= 1 mF
C
= C
= 1 mF
= 0 mA
IN
I
OUT
= 0 mA
IN
OUT
I
OUT
OUT
= 1.8 V
V
= 1.5 V
OUT(NOM)
OUT(NOM)
0
0
0
0
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
0
0
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
INPUT VOLTAGE (V)
INPUT VOLTAGE (V)
Figure 9. Quiescent Current vs. Input Voltage
OUT = 1.5 V
Figure 10. Quiescent Current vs. Input Voltage
VOUT = 1.8 V
V
35
30
25
20
15
10
5
35
30
25
20
15
10
5
T = 125°C
A
T = 125°C
A
T = 25°C
T = 25°C
A
A
T = −40°C
A
T = −40°C
A
C
V
= C
= 1 mF
C
V
= C
= 1 mF
IN
OUT
= 0 mA
IN
OUT
I
I
= 0 mA
OUT
OUT
= 2.8 V
= 3.0 V
OUT(NOM)
OUT(NOM)
0
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
INPUT VOLTAGE (V)
INPUT VOLTAGE (V)
Figure 11. Quiescent Current vs. Input Voltage
OUT = 2.8 V
Figure 12. Quiescent Current vs. Input Voltage
VOUT = 3.0 V
V
35
30
25
20
15
10
5
35
30
25
20
15
10
5
C
= C
= 1 mF
IN
OUT
I
= 0 mA
OUT
T = 125°C
A
T = 125°C
A
V
= 3.3 V
OUT(NOM)
T = 25°C
A
T = 25°C
A
T = −40°C
A
T = −40°C
A
C
= C
= 1 mF
IN
OUT
= 0 mA
I
OUT
V
= 3.1 V
OUT(NOM)
0
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
INPUT VOLTAGE (V)
INPUT VOLTAGE (V)
Figure 13. Quiescent Current vs. Input Voltage
OUT = 3.1 V
Figure 14. Quiescent Current vs. Input Voltage
VOUT = 3.3 V
V
www.onsemi.com
5
NCP707
2.00
1.75
1.50
1.25
1.00
0.75
0.50
0.25
0.00
2.00
1.75
1.50
1.25
1.00
0.75
0.50
0.25
0.00
T = 125°C
A
T = 125°C
A
T = 25°C
A
T = 25°C
A
C
= C
= 1 mF
= 0 mA
IN
I
OUT
C
= C
= 1 mF
= 0 mA
IN
I
OUT
T = −40°C
A
OUT
T = −40°C
A
OUT
V
= 1.8 V
OUT(NOM)
V
= 1.5 V
OUT(NOM)
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
INPUT VOLTAGE (V)
INPUT VOLTAGE (V)
Figure 15. Output Voltage vs. Input Voltage
OUT = 1.5 V
Figure 16. Output Voltage vs. Input Voltage
VOUT = 1.8 V
V
3.50
3.00
2.50
2.00
1.50
1.00
0.50
0.00
3.50
3.00
2.50
2.00
1.50
1.00
0.50
0.00
C
V
= C
= 1 mF
= 0 mA
C
V
= C
= 1 mF
= 0 mA
IN
I
OUT
IN
I
OUT
OUT
OUT
= 2.8 V
= 3.0 V
OUT(NOM)
OUT(NOM)
T = 125°C
A
T = 125°C
A
T = 25°C
A
T = 25°C
A
T = −40°C
A
T = −40°C
A
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
INPUT VOLTAGE (V)
INPUT VOLTAGE (V)
Figure 17. Output Voltage vs. Input Voltage
OUT = 2.8 V
Figure 18. Output Voltage vs. Input Voltage
VOUT = 3.0 V
V
3.50
3.00
2.50
2.00
1.50
1.00
0.50
0.00
4.00
3.50
3.00
2.50
2.00
1.50
1.00
0.50
0.00
C
V
= C
= 1 mF
= 0 mA
C
V
= C
= 1 mF
= 0 mA
IN
I
OUT
IN
I
OUT
OUT
OUT
= 3.3 V
= 3.1 V
OUT(NOM)
OUT(NOM)
T = 125°C
A
T = 125°C
A
T = 25°C
A
T = 25°C
A
T = −40°C
A
T = −40°C
A
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
INPUT VOLTAGE (V)
INPUT VOLTAGE (V)
Figure 19. Output Voltage vs. Input Voltage
OUT = 3.1 V
Figure 20. Output Voltage vs. Input Voltage
VOUT = 3.3 V
V
www.onsemi.com
6
NCP707
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
0.45
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
C
V
= C
= 1 mF
= 1.5 V
C
= C
= 1 mF
= 1.85 V
IN
OUT
IN
OUT
V
OUT(NOM)
OUT(NOM)
T = 125°C
A
T = 125°C
A
T = 25°C
A
T = 25°C
A
T = −40°C
A
T = −40°C
A
0
0
0.04
0.08
0.12
0.16
0.2
0
0.04
0.08
0.12
0.16
0.2
OUTPUT CURRENT (A)
OUTPUT CURRENT (A)
Figure 21. Dropout Voltage vs. Output Current
OUT = 1.5 V
Figure 22. Dropout Voltage vs. Output Current
VOUT = 1.85 V
V
0.200
0.175
0.150
0.125
0.100
0.075
0.050
0.025
0.000
0.200
0.175
0.150
0.125
0.100
0.075
0.050
0.025
0.000
C
V
= C
= 1 mF
= 2.8 V
C
V
= C
= 1 mF
= 3.0 V
IN
OUT
IN
OUT
OUT(NOM)
OUT(NOM)
T = 125°C
A
T = 125°C
A
T = 25°C
A
T = 25°C
A
T = −40°C
A
T = −40°C
A
0
0.04
0.08
0.12
0.16
0.2
0
0.04
0.08
0.12
0.16
0.2
OUTPUT CURRENT (A)
OUTPUT CURRENT (A)
Figure 23. Dropout Voltage vs. Output Current
OUT = 2.8 V
Figure 24. Dropout Voltage vs. Output Current
VOUT = 3.0 V
V
0.200
0.175
0.150
0.125
0.100
0.075
0.050
0.025
0.000
0.200
0.175
0.150
0.125
0.100
0.075
0.050
0.025
0.000
C
V
= C
= 1 mF
= 3.1 V
C
V
= C
= 1 mF
= 3.3 V
IN
OUT
IN
OUT
OUT(NOM)
OUT(NOM)
T = 125°C
A
T = 125°C
A
T = 25°C
A
T = 25°C
A
T = −40°C
A
T = −40°C
A
0
0.04
0.08
0.12
0.16
0.2
0
0.04
0.08
0.12
0.16
0.2
OUTPUT CURRENT (A)
OUTPUT CURRENT (A)
Figure 25. Dropout Voltage vs. Output Current
OUT = 3.1 V
Figure 26. Dropout Voltage vs. Output Current
OUT = 3.3 V
V
V
www.onsemi.com
7
NCP707
440
420
400
380
360
340
320
300
440
420
400
380
360
340
320
300
C
= C
= 1 mF
IN
OUT
V
IN
= 2.0 V
Short−Circuit Current:
for V = 0 V
V
= 1.5 V
OUT(NOM)
I
OUT
OUT
Short−Circuit Current:
for V = 0 V
I
OUT
OUT
Current Limit: I
for
OUT
V
OUT
= V
− 0.1 V
OUT(NOM)
Current Limit: I
for
OUT
V
OUT
= V
− 0.1 V
OUT(NOM)
C
= C
= 1 mF
IN
OUT
V
= 2.35 V
IN
OUT(NOM)
V
= 1.85 V
−40 −20
0
20
40
60
80 100
120 140
−40 −20
0
20
40
60
80 100
120 140
JUNCTION TEMPERATURE (°C)
JUNCTION TEMPERATURE (°C)
Figure 27. Short−Circuit Limit vs. Temperature
VOUT = 1.5 V
Figure 28. Short−Circuit Limit vs. Temperature
VOUT = 1.85 V
440
420
400
380
360
340
320
300
440
420
400
380
360
340
320
300
Short−Circuit Current:
Short−Circuit Current:
I
for V
= 0 V
OUT
OUT
I
for V
= 0 V
OUT
OUT
Current Limit: I
for
− 0.1 V
OUT
Current Limit: I
for
OUT
V
OUT
= V
OUT(NOM)
V
OUT
= V
− 0.1 V
OUT(NOM)
C
= C
= 1 mF
C
= C
V
= 1 mF
= 3.5 V
IN
OUT
IN
OUT
V
= 3.35 V
IN
OUT(NOM)
IN
OUT(NOM)
V
= 2.85 V
V
= 3.0 V
−40 −20
0
20
40
60
80 100
120 140
−40 −20
0
20
40
60
80 100
120 140
JUNCTION TEMPERATURE (°C)
JUNCTION TEMPERATURE (°C)
Figure 29. Short−Circuit Limit vs. Temperature
OUT = 2.85 V
Figure 30. Short−Circuit Limit vs. Temperature
VOUT = 3.0 V
V
460
440
460
440
C
= C
= 1 mF
IN
OUT
V
= 3.8 V
IN
OUT(NOM)
Short−Circuit Current:
for V = 0 V
V
= 3.3 V
I
OUT
OUT
420
400
380
360
340
320
420
400
380
360
340
320
Short−Circuit Current:
I
for V
= 0 V
OUT
OUT
Current Limit: I
for
− 0.1 V
OUT
V
= V
OUT
OUT(NOM)
Current Limit: I
= V
for
OUT
V
− 0.1 V
C
= C
= 1 mF
OUT
OUT(NOM)
IN
OUT
V
IN
= 3.6 V
V
= 3.1 V
OUT(NOM)
−40 −20
0
20
40
60
80 100
120 140
−40 −20
0
20
40
60
80 100
120 140
JUNCTION TEMPERATURE (°C)
JUNCTION TEMPERATURE (°C)
Figure 31. Short−Circuit Limit vs. Temperature
VOUT = 3.1 V
Figure 32. Short−Circuit Limit vs. Temperature
VOUT = 3.3 V
www.onsemi.com
8
NCP707
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
C
= C
= 1 mF
IN
OUT
C
= C
= 1 mF
IN
OUT
V
IN
= 2.0 V to 5.5 V
V
IN
= 2.35 V to 5.5 V
V
= 1.5 V
OUT(NOM)
V
= 1.85 V
OUT(NOM)
I
= 10 mA
OUT
I
= 10 mA
OUT
Line Regulation from V = 2 V to 5.5 V
IN
Line Regulation from V = 2.35 V to 5.5 V
IN
−40 −20
0
20
40
60
80 100
120 140
−40 −20
0
20
40
60
80 100
120 140
JUNCTION TEMPERATURE (°C)
JUNCTION TEMPERATURE (°C)
Figure 33. Line Regulation vs. Temperature
OUT = 1.5 V
Figure 34. Line Regulation vs. Temperature
VOUT = 1.85 V
V
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
C
= C
= 1 mF
IN
OUT
C
= C
= 1 mF
IN
OUT
V
IN
= 3.5 V to 5.5 V
= 3.0 V
V
IN
= 3.35 V to 5.5 V
V
OUT(NOM)
V
= 2.85 V
OUT(NOM)
I
= 10 mA
OUT
I
= 10 mA
OUT
Line Regulation from V = 3.5 V to 5.5 V
Line Regulation from V = 3.35 V to 5.5 V
IN
IN
−40 −20
0
20
40
60
80 100
120 140
−40 −20
0
20
40
60
80 100
120 140
JUNCTION TEMPERATURE (°C)
JUNCTION TEMPERATURE (°C)
Figure 35. Line Regulation vs. Temperature
OUT = 2.85 V
Figure 36. Line Regulation vs. Temperature
VOUT = 3.0 V
V
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
C
= C
= 1 mF
C
= C
= 1 mF
IN
OUT
IN
OUT
V
IN
= 3.8 V to 5.5 V
= 3.3 V
V
IN
= 3.6 V to 5.5 V
= 3.1 V
V
V
OUT(NOM)
OUT(NOM)
I
= 10 mA
I
= 10 mA
OUT
OUT
Line Regulation from V = 3.8 V to 5.5 V
IN
Line Regulation from V = 3.6 V to 5.5 V
IN
−40 −20
0
20
40
60
80 100
120 140
−40 −20
0
20
40
60
80 100
120 140
JUNCTION TEMPERATURE (°C)
JUNCTION TEMPERATURE (°C)
Figure 37. Line Regulation vs. Temperature
VOUT = 3.1 V
Figure 38. Line Regulation vs. Temperature
VOUT = 3.3 V
www.onsemi.com
9
NCP707
10
9
8
7
6
5
4
3
2
1
0
200
C
= C
= 1 mF
+ 0.5 V
C
= C
= 1 mF
+ 0.5 V
IN
OUT
OUT(NOM)
IN
OUT
OUT(NOM)
180
160
140
120
100
80
V
= V
V
I
= V
IN
IN
= 0 mA to 200 mA
OUT
T = 125°C
A
V
= 1.5 V
OUT(NOM)
T = 25°C
A
T = −40°C
A
60
V
= 1.8 V
OUT(NOM)
40
20
V
= 3.3 V
OUT(NOM)
0
−40 −20
0
20
40
60
80 100
120 140
0
1
2
3
4
5
6
7
8
9
10
JUNCTION TEMPERATURE (°C)
OUTPUT CURRENT (mA)
Figure 39. Load Regulation vs. Temperature
Figure 40. Ground Current vs. Output Current
100
10
300
280
260
240
220
200
C
= C
= 1 mF
+ 0.5 V
IN
OUT
V
V
= 1.5 V
= 3.3 V
OUT
OUT
V
= V
I
IN
OUT(NOM)
= 200 mA
OUT
UNSTABLE OPERATION
STABLE OPERATION
V
= 1.5 V
OUT(NOM)
1
V
= 1.85 V
OUT(NOM)
0.1
0.01
V
= 3.3 V
OUT(NOM)
V
= 2.85 V
OUT(NOM)
0
100
200
300
−40 −20
0
20
40
60
80 100
120 140
JUNCTION TEMPERATURE (°C)
OUTPUT CURRENT (mA)
Figure 41. Ground Current vs. Temperature
Figure 42. Stability vs. Output Capacitor ESR
90
80
70
60
50
40
30
20
10
0
100
90
80
70
60
50
40
30
20
10
0
I
= 1 mA
I
= 150 mA
OUT
OUT
I
= 1 mA
OUT
I
= 10 mA
OUT
I
= 10 mA
OUT
C
C
= 1 mF
= none,
C
C
= 1 mF
= none,
= 2.35 V 50 mV
AC
OUT
OUT
IN
IN
V
= 2.0 V 50 mV
AC
I
= 150 mA
V
IN
V
OUT
IN
V
= 1.5 V
= 1.85 V
OUT(NOM)
OUT(NOM)
10
100
1k
10k
100k
1M
10M
10
100
1k
10k
100k
1M
10M
FREQUENCY (Hz)
FREQUENCY (Hz)
Figure 43. PSRR vs. Frequency
VOUT = 1.5 V
Figure 44. PSRR vs. Frequency
VOUT = 1.85 V
www.onsemi.com
10
NCP707
90
100
90
80
70
60
50
40
30
20
10
0
80
70
60
50
40
30
20
10
0
I
= 150 mA
OUT
I
= 150 mA
I
= 1 mA
OUT
OUT
I
= 1 mA
OUT
C
= 1 mF
OUT
C
C
= 1 mF
OUT
C
= none,
IN
= none,
= 3.5 V 50 mV
AC
IN
I
= 10 mA
OUT
V
IN
= 3.6 V 50 mV
AC
V
IN
V
I
= 10 mA
OUT
V
= 3.1 V
OUT(NOM)
= 3.0 V
OUT(NOM)
10
100
1k
10k
100k
1M
10M
10
100
1k
10k
100k
1M
10M
FREQUENCY (Hz)
FREQUENCY (Hz)
Figure 45. PSRR vs. Frequency
VOUT = 3.0 V
Figure 46. PSRR vs. Frequency
VOUT = 3.1 V
C
V
= C
= 3.6 V
= 1 mF
C
V
= C
= 2.0 V
= 1 mF
IN
OUT
IN
OUT
IN
IN
V
= 3.1 V
V
= 1.5 V
OUT
OUT
1.000
0.100
0.010
0.001
1.000
0.100
0.010
0.001
MLCC, X7R
1206 size
MLCC, X7R
1206 size
I
= 10 mA
I
= 10 mA
OUT
OUT
I
= 200 mA
OUT
I
= 200 mA
10k
OUT
I
= 1 mA
OUT
I
= 1 mA
OUT
10
100
1k
10k
100k
1M
10
100
1k
100k
1M
FREQUENCY (Hz)
FREQUENCY (Hz)
Figure 47. Output Noise Density vs. Frequency
OUT = 1.5 V
Figure 48. Output Noise Density vs. Frequency
VOUT = 3.1 V
V
0.35
0.3
0.9
0.85
0.8
V
= C
= 2 V
IN
T = 125°C
A
C
V
= 1 mF
IN
OUT
= 1.5 V
OUT(NOM)
0.25
0.2
V
EN
= Low to High
0.75
0.7
T = 25°C
A
0.15
0.1
V
EN
= High to Low
0.65
0.6
T = −40°C
A
C
= C
V
= 1 mF
= 2 V
IN
OUT
0.05
0
0.55
IN
OUT(NOM)
V
= 1.5 V
0.5
−40 −20
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
0
20
40
60
80
100 120 140
ENABLE VOLTAGE (V)
JUNCTION TEMPERATURE (°C)
Figure 49. Enable Input Current vs. Enable
Voltage
Figure 50. Enable Threshold Voltage vs.
Temperature
www.onsemi.com
11
NCP707
0.2
0.16
0.12
0.08
0.04
0
300
280
260
240
220
200
180
160
140
120
100
C
= C
= 1 mF
IN
OUT
+ 0.5 V
OUT(NOM)
V
= V
IN
V
EN
= 0 V
V
= 3.3 V
OUT
V
C
= 1.5 V
OUT
= C
= 1 mF
IN
OUT
V
IN
= V
+ 0.5 V
OUT(NOM)
V
EN
= Step from 0 V to 1 V / 1 ms
−40 −20
0
20
40
60
80
100 120 140
−40 −20
0
20
40
60
80
100 120 140
JUNCTION TEMPERATURE (°C)
JUNCTION TEMPERATURE (°C)
Figure 51. Shutdown Current vs. Temperature
Figure 52. VOUT Turn−on Time vs.
Temperature
www.onsemi.com
12
NCP707
V
V
= 3.6 V
V
V
= 3.6 V
IN
IN
200 mA
200 mA
= 3.1 V
= 3.1 V
OUT(nom)
OUT(nom)
C
= C
= 1 mF
C
= C = 4.7 mF
OUT
IN
OUT
IN
1 mA
1 mA
I
I
OUT
OUT
V
OUT
V
OUT
20 ms / div
20 ms / div
Figure 53. Load Transient Response
OUT = 1 mA to 200 mA, COUT = 1 mF
Figure 54. Load Transient Response
IOUT = 1 mA to 200 mA, COUT = 4.7 mF
I
V
V
= 3.6 V
IN
V
V
= 3.6 V
IN
= 3.1 V
200 mA
OUT(nom)
200 mA
= 3.1 V
OUT(nom)
C
= C
= 1 mF
IN
OUT
C
= C
= 4.7 mF
IN
OUT
10 mA
10 mA
I
I
OUT
OUT
V
OUT
V
OUT
10 ms / div
20 ms / div
Figure 55. Load Transient Response
Figure 56. Load Transient Response
IOUT = 10 mA to 200 mA, COUT = 1 mF
IOUT = 10 mA to 200 mA, COUT = 4.7 mF
V
V
= 2.3 V
IN
R = 1.8 kW
L
= 1.8 V
V
OUT
= 1.8 V
V
OUT
= 1.8 V
OUT(nom)
C
= C
= 1 mF
IN
OUT
R = 180 kW
L
V
OUT
= 0 V
V
OUT
= 0 V
I
IN
= 1 mA
I
IN
V
EN
= 1 V
V
V
= 2.3 V
IN
= 1.8 V
OUT(nom)
V
EN
= 1 V
C
= C
= 1 mF
IN
OUT
V
EN
= 0 V
V
EN
= 0 V
500 ms / div
500 ms / div
Figure 57. Enable Turn−On Response
OUT = 1.8 V, COUT = 1 mF
Figure 58. Enable Turn−Off Response
OUT = 1.8 V, COUT = 1 mF (A Version)
V
V
www.onsemi.com
13
NCP707
V
V
= 3.8 V
V
V
= 3.8 V
IN
IN
R = 1.8 kW
L
V
OUT
= 1.8 V
V
OUT
= 1.8 V
= 3.3 V
= 1 mF
= 3.3 V
= 1 mF
OUT
OUT(nom)
OUT(nom)
C
= C
C
= C
IN
OUT
IN
R = 180 kW
L
V
OUT
= 0 V
V
OUT
= 0 V
I
IN
I
IN
= 1 mA
V
EN
= 1 V
V
EN
= 1 V
V
EN
= 0 V
V
EN
= 0 V
50 ms / div
500 ms / div
Figure 59. Enable Turn−On Response
OUT = 3.3 V, COUT = 1 mF
Figure 60. Enable Turn−Off Response
V
V
OUT = 3.3 V, COUT = 1 mF (A Version)
V
V
= 3.8 V
V
V
= 3.8 V
IN
IN
= 3.3 V
= 3.3 V
OUT(nom)
OUT(nom)
C
= C
= 1 mF
C
= C
= 1 mF
IN
OUT
IN
OUT
V
= 2.3 V
= 1.8 V
V
= 2.3 V
= 1.8 V
IN
IN
V
OUT
V
OUT
V
= 0 V
IN
V
= 0 V
IN
V
OUT
= 0 V
V
OUT
= 0 V
I
IN
= 1 mA
500 ms / div
2 ms / div
Figure 61. Enable Turn−On Response
OUT = 1.8 V, COUT = 1 mF
Figure 62. Enable Turn−Off Response
V
V
OUT = 1.8 V, COUT = 1 mF (A Version)
V
V
= 3.8 V
IN
= 3.3 V
= 1 mF
V
IN
= 3.8 V
OUT(nom)
C
= C
OUT
IN
V
= 3.3 V
OUT
V
= 3.8 V
= 3.3 V
IN
V
= 0 V
= 0 V
IN
V
V
= 3.8 V
IN
V
OUT
V
OUT
= 3.3 V
OUT(nom)
C
= C
= 1 mF
IN
OUT
V
IN
= 0 V
V
OUT
= 0 V
I
IN
= 1 mA
Figure 63. Enable Turn−On Response
OUT = 3.3 V, COUT = 1 mF
Figure 64. Enable Turn−Off Response
OUT = 3.3 V, COUT = 1 mF (A Version)
V
V
www.onsemi.com
14
NCP707
V
OUT
= 3.3 V
Output Short−Circuit
= 0 V
Output Short−Circuit
V
OUT
= 1.5 V
V
OUT
V
OUT
= 0 V
V
V
= 5.5 V
IN
V
= 5.5 V
IN
= 3.3 V
= 1 mF
OUT(nom)
V
= 1.5 V
OUT(nom)
C
= C
OUT
IN
C
= C
= 1 mF
IN
OUT
I
= 402 mA
I
= 398 mA
OUT
OUT
I
= 1 mA
OUT
200 ms / div
200 ms / div
Figure 65. Short−Circuit Response
OUT = 1.5 V, COUT = 1 mF
Figure 66. Short−Circuit Response
OUT = 1.5 V, COUT = 1 mF
V
V
V
IN
= 2.0 V
V
= 1.5 V
OUT(nom)
V
OUT
= 1.5 V
C
= C
= 1 mF
IN
OUT
V
OUT
= 0 V
Thermal Shutdown
I
= 398 mA
OUT
I
= 1 mA
OUT
5 ms / div
Figure 67. Short−Circuit Response
V
OUT = 1.5 V, COUT = 1 mF
www.onsemi.com
15
NCP707
APPLICATIONS INFORMATION
The NCP707 is a high performance, small package size,
to GND through a 1.2 kW resistor for A options or 120 W
200 mA LDO voltage regulator. This device delivers very
good noise and dynamic performance. Thanks to its adaptive
ground current feature the device consumes only 25 mA of
quiescent current at no−load condition. The regulator
features very*low noise of 22 mVRMS, PSRR of typ. 70dB
at 1kHz and very good load/line transient response. The
device is an ideal choice for space constrained portable
applications.
A logic EN input provides ON/OFF control of the output
voltage. When the EN is low the device consumes as low as
typ. 10 nA from the IN pin.
The device is fully protected in case of output overload,
output short circuit condition and overheating, assuring a
very robust design.
resistor for C options. In the disable state the device
consumes as low as typ. 10 nA from the V . If the EN pin
IN
voltage > 0.9 V the device is guaranteed to be enabled. The
NCP707 regulates the output voltage and the active
discharge transistor is turned*off. The EN pin has an
internal pull−down current source with typ. value of 180 nA
which assures that the device is turned−off when the EN pin
is not connected. A build in 56 mV of hysteresis and deglitch
time in the EN block prevents from periodic on/off
oscillations that can occur due to noise on EN line. In the
case that the EN function isn’t required the EN pin should be
tied directly to IN.
Reverse Current
The PMOS pass transistor has an inherent body diode
which will be forward biased in the case that V
> V .
Input Capacitor Selection (CIN)
OUT
IN
Due to this fact in cases where the extended reverse current
condition is anticipated the device may require additional
external protection.
It is recommended to connect a minimum of 1 μF Ceramic
X5R or X7R capacitor close to the IN pin of the device.
Larger input capacitors may be necessary if fast and large
load transients are encountered in the application. There is
no requirement for the min./max. ESR of the input capacitor
but it is recommended to use ceramic capacitors for their low
ESR and ESL.
Output Current Limit
Output Current is internally limited within the IC to a
typical 379 mA. The NCP707 will source this amount of
current measured with the output voltage 100 mV lower
than the nominal V
shorted to ground (V
will limit the output current to 390 mA (typ). The current
limit and short circuit protection will work properly up to
. If the Output Voltage is directly
= 0 V), the short circuit protection
Output Capacitor Selection (COUT
)
OUT
The NCP707 is designed to be stable with small 1.0 mF and
larger ceramic capacitors on the output. The minimum
effective output capacitance for which the LDO remains
stable is 100 nF. The safety margin is provided to account for
capacitance variations due to DC bias voltage, temperature,
initial tolerance. There is no requirement for the minimum
OUT
V
=5.5 V at T = 25°C. There is no limitation for the short
IN
A
circuit duration.
Thermal Shutdown
value of Equivalent Series Resistance (ESR) for the C
OUT
When the die temperature exceeds the Thermal Shutdown
threshold (TSD * 160°C typical), Thermal Shutdown event
is detected and the device is disabled. The IC will remain in
this state until the die temperature decreases below the
Thermal Shutdown Reset threshold (TSDU − 140°C
typical). Once the IC temperature falls below the 140°C the
LDO is enabled again. The thermal shutdown feature
provides protection from a catastrophic device failure due to
accidental overheating. This protection is not intended to be
used as a substitute for proper heat sinking.
but the maximum value of ESR should be less than 700 mΩ.
Larger output capacitors could be used to improve the load
transient response or high frequency PSRR characteristics.
It is not recommended to use tantalum capacitors on the
output due to their large ESR. The equivalent series
resistance of tantalum capacitors is also strongly dependent
on the temperature, increasing at low temperature. The
tantalum capacitors are generally more costly than ceramic
capacitors.
No−load Operation
Power Dissipation
The regulator remains stable and regulates the output
voltage properly within the 2% tolerance limits even with
no external load applied to the output.
As power dissipated in the NCP707 increases, it might
become necessary to provide some thermal relief. The
maximum power dissipation supported by the device is
dependent upon board design and layout. Mounting pad
configuration on the PCB, the board material, and the
ambient temperature affect the rate of junction temperature
rise for the part. The maximum power dissipation the
NCP707 can handle is given by:
Enable Operation
The NCP707 uses the EN pin to enable/disable its output
and to control the active discharge function. If the EN pin
voltage is < 0.4 V the device is guaranteed to be disabled.
The pass transistor is turned*off so that there is virtually no
current flow between the IN and OUT. In case of the option
equipped with active discharge − the active discharge
ƪ
ƫ
125 * TA
(eq. 1)
PD(MAX)
+
qJA
transistor is turned−on and the output voltage V
is pulled
OUT
www.onsemi.com
16
NCP707
For reliable operation junction temperature should be
limited to +125°C.
The power dissipated by the NCP707 for given
application conditions can be calculated as follows:
point of load can easily approach 100 mW which will cause
a 20 mV voltage drop at full load current, deteriorating the
excellent load regulation.
Line Regulation
The IC features very good line regulation of 0.4 mV/V
ǒ
Ǔ
(eq. 2)
PD(MAX) + VINIGND ) IOUT VIN * VOUT
measured from V = V
+ 0.5 V to 5.5 V.
IN
OUT
Figure 68 shows the typical values of θ vs. heat
JA
spreading area.
Power Supply Rejection Ratio
At low frequencies the PSRR is mainly determined by the
feedback open−loop gain. At higher frequencies in the range
Load Regulation
The NCP707 features very good load regulation of typical
2 mV in the 0 mA to 200 mA range. In order to achieve this
very good load regulation a special attention to PCB design
is necessary. The trace resistance from the OUT pin to the
100 kHz – 10 MHz it can be tuned by the selection of C
capacitor and proper PCB layout.
OUT
500
0,9
Theta JA curve with PCB cu thk 1,0 oz
450
400
350
300
250
200
150
100
50
0,8
0,7
0,6
0,5
0,4
0,3
0,2
0,1
0
Theta JA curve with PCB cu thk 2,0 oz
Power curve with PCB cu thk 2,0 oz
Power curve with PCB cu thk 1,0 oz
0
100
200
300
400
500
600
2
COPPER AREA (mm)
Figure 68. Thermal Parameters vs. Copper Area
Output Noise
voltage overshoots and assures monotonic ramp−up of the
output voltage.
The IC is designed for very−low output voltage noise. The
typical noise performance of 22 mV makes the device
suitable for noise sensitive applications.
RMS
PCB Layout Recommendations
To obtain good transient performance and good regulation
Internal Soft Start
characteristics place C and C
capacitors close to the
IN
OUT
The Internal Soft*Start circuitry will limit the inrush
current during the LDO turn−on phase. Please refer to
typical characteristics section for typical inrush current
values. The soft*start function prevents from any output
device pins and make the PCB traces wide. In order to
minimize the solution size use 0402 capacitors. Larger
copper area connected to the pins will also improve the
device thermal resistance. The actual power dissipation can
be calculated by the formula given in Equation 2.
www.onsemi.com
17
NCP707
ORDERING INFORMATION
Voltage
Option
Marking
Rotation
†
Device
Marking
Option
Package
Shipping
NCP707AMX150TCG
NCP707AMX180TCG
NCP707AMX185TCG
NCP707AMX250TCG
NCP707AMX280TCG
NCP707AMX285TCG
NCP707AMX300TCG
NCP707AMX310TCG
NCP707AMX330TCG
NCP707BMX150TCG
NCP707BMX180TCG
NCP707BMX185TCG
NCP707BMX250TCG
NCP707BMX280TCG
NCP707BMX285TCG
NCP707BMX300TCG
NCP707BMX310TCG
NCP707BMX330TCG
NCP707CMX150TCG
NCP707CMX180TBG
NCP707CMX180TCG
NCP707CMX185TCG
NCP707CMX250TCG
NCP707CMX280TCG
NCP707CMX285TCG
NCP707CMX300TBG
NCP707CMX300TCG
NCP707CMX310TCG
NCP707CMX320TCG
NCP707CMX330TBG
NCP707CMX330TCG
1.5 V
1.8 V
1.85 V
2.5 V
2.8 V
2.85 V
3.0 V
3.1 V
3.3 V
1.5 V
1.8 V
1.85 V
2.5 V
2.8 V
2.85 V
3.0 V
3.1 V
3.3 V
1.5 V
1.8 V
1.8 V
1.85 V
2.5 V
2.8 V
2.85 V
3.0 V
3.0 V
3.1 V
3.2 V
3.3 V
3.3 V
A
D
E
K
F
J
0°
0°
0°
180°
0°
With active output
discharge function
(R
= 1.2 kW)
DIS
0°
K
L
0°
0°
P
A
D
E
K
F
J
0°
90°
90°
90°
270°
90°
Without active output
discharge function
90°
XDFN4
(Pb-Free)
K
L
90°
3000 / Tape & Reel
90°
P
L
90°
180°
180°
180°
180°
180°
180°
180°
180°
180°
180°
180°
180°
180°
P
P
Q
V
Y
2
With active output
discharge function
(R
= 120 W)
DIS
3
3
4
5
6
6
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
www.onsemi.com
18
NCP707
PACKAGE DIMENSIONS
XDFN4 1.0x1.0, 0.65P
CASE 711AJ
ISSUE A
4X L2
NOTES:
A
B
D
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED TERMINAL
AND IS MEASURED BETWEEN 0.15 AND
0.20 mm FROM THE TERMINAL TIPS.
4. COPLANARITY APPLIES TO THE EXPOSED
PAD AS WELL AS THE TERMINALS.
PIN ONE
REFERENCE
E
4X b2
2X
0.05
C
MILLIMETERS
DETAIL A
DIM MIN
0.33
A1 0.00
MAX
0.43
0.05
0.05
C
2X
A
TOP VIEW
A3
b
b2 0.02
0.10 REF
0.15
0.25
0.12
(A3)
0.05
0.05
C
D
1.00 BSC
D2 0.43
0.53
1.00 BSC
0.65 BSC
A
E
e
L
C
0.20
0.30
0.17
SEATING
PLANE
NOTE 4
A1
L2 0.07
C
SIDE VIEW
e
e/2
RECOMMENDED
MOUNTING FOOTPRINT*
DETAIL A
4X L
D2
1
4
2
2X
0.52
0.65
PITCH
PACKAGE
D2
OUTLINE
455
3
4X
0.39
4X
0.11
1.20
4X b
M
0.05
C A B
NOTE 3
BOTTOM VIEW
4X
4X
0.26
0.24
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
Bluetooth is a registered trademark of Bluetooth SIG.
ZigBee is a registered trademark of ZigBee Alliance.
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
For additional information, please contact your local
Sales Representative
◊
NCP707/D
相关型号:
©2020 ICPDF网 联系我们和版权申明