NUF4107FC_06 [ONSEMI]
Four Channel EMI Pi−Filter Array with Full USB Filter; 与完整的USB过滤器四通道EMI丕滤波器阵列
| 型号： | NUF4107FC_06 |
| 厂家： | 
ONSEMI |
| 描述： | Four Channel EMI Pi−Filter Array with Full USB Filter |
| 文件： | 总5页 (文件大小：133K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
NUF4107FC
Four Channel EMI Pi−Filter
Array with Full USB Filter
This device is a four−channel EMI filter array for data lines. Greater
than −35 dB attenuation is obtained at frequencies from 800 MHz to
2.2 GHz. It also offers USB filtering circuitry with speed detection.
This includes the inline resistors for impedance matching and EMI
filtering. ESD protection is provided across all capacitors.
http://onsemi.com
CIRCUIT DESCRIPTION
Features
R
R
R
R
R
R
1
2
3
A1
A2
A3
A4
A5
A6
• EMI Filtering and ESD Protection for Data Lines
• USB 1.1 Filtering Provided with Speed Detection
• Integration of 27 Discretes Offers Cost and Space Savings
• 350 mm Solder Spheres
C1
C2
C3
C4
C5
C6
C
1
2
3
D
D
D
D
D
1
2
R
7
B
1
C
• All TVS Protected Inputs Comply with IEC61000−4−2 (Level 4)
30 kV (Contact)
30 kV (Air)
B
2
D
11
• Low Profile Flip−Chip Packaging
• MSL 1
• All Pins Exceed 2000 V Human Body Model (Note 1)
• Pb−Free Package is Available*
C
C
4
3
5
7
D
4
6
8
B
3
4
5
6
C
C
C
5
6
8
Typical Applications
D
D
• EMI and USB Filtering and ESD Protection for Data Lines
• Cell Phones
B
4
• Handheld Portables
C
7
• Notebook Computers
B
5
• MP3 Players
MAXIMUM RATINGS (T = 25°C)
A
D
C
9
C
9
10
D
10
Rating
Symbol
Value
Unit
ESD Discharge IEC61000−4−2 (Note 1)
− Air Discharge, Contact Discharge
Human Body Model
V
PP
kV
30
16
0.4
FLIP−CHIP−17
CASE 499AD
Machine Model
A1
DC Power per Resistor
P
100
600
mW
mW
°C
R
MARKING DIAGRAM
DC Power per Package
Junction Temperature
P
T
J
4107
A
Y
= Device Code
= Assembly Location
= Year
= Work Week
= Pb−Free Package
T
150
4107AYWW G
Operating Temperature Range
Storage Temperature Range
T
op
−40 to +85
−55 to +150
°C
G
WW
G
T
stg
°C
(Note: Microdot may be in either location)
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. This does not include Pins B1, C1 and C2
ORDERING INFORMATION
Device
Package
Shipping†
NUF4107FCT1
Flip−Chip 3000 Tape & Reel
NUF4107FCT1G
Flip−Chip 3000 Tape & Reel
(Pb−Free)
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2006
1
Publication Order Number:
March, 2006 − Rev. 3
NUF4107FC/D
NUF4107FC
ELECTRICAL CHARACTERISTICS (T = 25°C unless otherwise noted)
A
Symbol
Characteristic
Min
6.0
−
Typ
6.8
−
Max
8.0
0.1
120
26
Unit
V
V
BR
I = 1.0 mA
R
I
R
V
RM
= 3.3 V per line
mA
W
R
− R
EMI Filter Resistors
80
100
22
3
6
R , R
USB Resistors; Impedance Matching
USB Pull−up; Speed Detection Resistor
At 2.5 V Bias
18
W
1
2
R
1250
48
1500
60
1750
72
W
7
C
pF
pF
pF
line
C1, C2
At Pins A1 and A2; At 2.5 V Bias
At Pins B2; At 2.5 V Bias
29
36
43
C
54
68
82
power
http://onsemi.com
2
NUF4107FC
TYPICAL CHARACTERISTICS
110
108
106
104
102
100
98
25
24
23
22
21
20
19
96
94
92
90
−40
−20
0
20
40
60
80 85
−40
−20
0
20
40
60
80 85
TEMPERATURE °C
TEMPERATURE °C
Figure 1. USB 1.1 Resistors (R1, R2) vs. Temperature
Figure 2. Data Resistors (R3, R4, R5, R6)
vs. Temperature
0
−10
−20
−30
1600
1580
1560
1540
1520
1500
1480
1460
1440
1420
1400
USB1
USB2
−40
−50
−60
Test Conditions:
Pins B1, B2 floating
V
line
= 0 V
1
10
100
1000
10,000
−40
−20
0
20
40
60
80 85
FREQUENCY (MHz)
TEMPERATURE °C
Figure 4. Insertion Loss Characteristic
USB1, USB2
Figure 3. Pull−up Resistor (R7) vs. Temperature
0
−5
0
−10
−20
−30
−40
−50
−60
−70
Test Conditions:
Pins B1, B2 floating
V
line
= 0 V
−10
−15
−20
−25
−30
−35
−40
EMI3
USB1 − USB2
USB2 − EMI3
EMI3 − EMI4
EMI5 − EMI6
EMI4 − EMI5
10
EMI5
Test Conditions:
EMI6
Pins B1, B2 floating
= 0 V
EMI4
−80
−90
−45
−50
V
line
1
10
100
FREQUENCY (MHz)
1000
10,000
1
100
FREQUENCY (MHz)
1000
10,000
Figure 5. Insertion Loss Characteristic
EMI3, EMI4, EMI5, EMI6
Figure 6. Analog Crosstalk Curve
EMI Filter
http://onsemi.com
3
NUF4107FC
Printed Circuit Board Recommendations
500 mm Pitch
300 mm Solder Ball
Parameter
PCB Pad Size
250 mm +25
250 mm −0
Pad Shape
Pad Type
Round
NSMD
Solder Mask Opening
Solder Stencil Thickness
Stencil Aperture
Solder Flux Ratio
Solder Paste Type
Trace Finish
350 mm 25
125 mm
250 x 250 mm sq.
50/50
No Clean Type 3 or Finer
OSP Cu
Trace Width
150 mm Max
Copper
Solder Mask
NSMD
SMD
Figure 7. Solder Mask versus Non−Solder Mask Definition
T = (15−30 sec)
p
280 −
270 −
260 −
250 −
240 −
230 −
210 −
200 −
190 −
180 −
170 −
160 −
150 −
140 −
130 −
120 −
110 −
100 −
90 −
T = 260°C − 5°C
p
RAMP−UP
T = 217
L
RAMP−DOWN
t
L
(60−90 sec)
80 −
PRE−HEAT
ZONE
70 −
60 −
50 −
40 −
30 −
20 −
10 −
0 −
TIME (seconds)
Figure 8. Typical Pb−Free Solder Heating Profile
http://onsemi.com
4
NUF4107FC
PACKAGE DIMENSIONS
FLIP−CHIP−17 CSP
CASE 499AD−01
ISSUE A
4 X
D
NOTES:
A
B
E
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
0.10
C
2. CONTROLLING DIMENSION: MILLIMETER.
3. COPLANARITY APPLIES TO SPHERICAL
CROWNS OF SOLDER BALLS.
TERMINAL A1
LOCATOR
MILLIMETERS
DIM
A
A1
A2
D
E
b
MIN
−−−
0.250
0.380
2.960 BSC
1.330 BSC
0.350 0.410
MAX
0.740
0.310
0.430
TOP VIEW
SIDE VIEW
A1
A
0.10
0.05
C
C
e
0.500 BSC
0.435 BSC
2.500 BSC
0.870 BSC
C
A2
e1
D1
E1
SEATING
PLANE
D1
e /2
e
C
B
A
17 X
b
E1
e1
0.05
0.03
C
C
A B
1
2
3
4
5
6
BOTTOM VIEW
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer
purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
ON Semiconductor Website: http://onsemi.com
Order Literature: http://www.onsemi.com/litorder
Literature Distribution Center for ON Semiconductor
P.O. Box 61312, Phoenix, Arizona 85082−1312 USA
Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada
Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
Japan: ON Semiconductor, Japan Customer Focus Center
2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051
Phone: 81−3−5773−3850
For additional information, please contact your
local Sales Representative.
NUF4107FC/D
相关型号：
NUF4210MNT1G
Low Capacitance 4 Line EMI Filter with ESD Protection in DFN8 1.6 x 1.6 mm Package
ONSEMI
©2020 ICPDF网 联系我们和版权申明