PACUSB-U1Y6 [ONSEMI]
Upstream USB Port Terminator; 上游USB端口终结者型号: | PACUSB-U1Y6 |
厂家: | ONSEMI |
描述: | Upstream USB Port Terminator |
文件: | 总9页 (文件大小:109K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Upstream USB Port Terminator
PACUSB-U1/U2/U3
Features
Product Description
•
One upstream USB port terminator, EMI filter and
transient overvoltage protector in a single
surface-mount package
Compact SC70 or SOT23 package saves board
space and lowers manufacturing costs compared
to discrete solutions
ESD protection to 30kV contact discharge per
MIL-STD-883D, method 3015
ESD protection to 15kV contact discharge per
IEC 61000-4-2 international standard
Lead-free version available
The PACUSB-U1, PACUSB-U2, and PACUSB-U3
are single-channel USB upstream-port termination
networks.
•
The PACUSB-U1/U2/U3 integrate EMI/RFI filter
components R1 and C1, as recommended by the
USB specification. Because these are upstream USB
devices, they are terminated with a single 1.5kW pull-
up resistor to V3.3 (R2).
There are three options for the value of the series
resistor R1:
•
•
•
•
•
•
For PACUSB-U1, R1=15Ω
For PACUSB-U2, R1=33Ω
For PACUSB-U3, R1=22Ω
This series resistance plus the USB driver output
resistance must be close to the USB cable’s
characteristic impedance of 45Ω (90Ω balanced) to
minimize transmission line reflections.
Applications
•
•
ESD protection and termination of USB port
All USB peripherals (PC printers, scanners,
zip drives, etc.)
•
•
•
•
•
PDAs / handheld PCs
Digital cameras
Wireless Handets
MP3 Players
Cable Modems
In addition, these parts provide a very high level of
protection for sensitive electronic components that
may be subjected to electrostatic discharge (ESD).
The input and output pins are designed and
characterized to dissipate ESD strikes of 15kV
safely,
a
level well beyond the maximum
requirements of the IEC 61000-4-2 international
standard.
Using
the
MIL-STD-883D
(Method
3015)
specification for Human Body Model (HBM) ESD, all
pins are protected for contact discharges to greater
than 30kV.
The PACUSB-U1/U2/U3 is housed in either a 6-pin
SC70 or 6-pin SOT23 package and is available with
optional lead-free finishing.
©2010 SCILLC. All rights reserved.
June 2010 – Rev. 2
Publication Order Number:
PACUSB-U1/U2/U3/D
PACUSB-U1/U2/U3
Electrical Schematic
D1_c
D1_i
GND
D2_i
i = input
c = connector
V3.3
D2_c
D1_i
GND
D2_i
1
6
5
4
D1_c
V3.3
D1_i
GND
D2_i
1
6
5
4
D1_c
V3.3
2
3
2
3
D2_c
D2_c
6-pin SC70
6-pin SOT23
PIN DESCRIPTIONS
PIN
NAME
DESCRIPTION
1
D1_i
The USB Controller side of the D+ or D- bidirectional transmission line of the
differential pair defined by USB standards.
2
3
GND
D2_i
The ground reference for the PACUSB-U1/U2/U3 device.
The USB Controller side of the D- or D+ bidirectional transmission line of the
differential pair defined by USB standards.
4
D2_c
The connector side of the D- or D+ bidirectional transmission line of the differential pair
defined by USB standards.
5
6
V3.3
The 3.3V supply voltage for the PACUSB-U1/U2/U3 device.
D1_c
The connector side of the D+ or D- bidirectional transmission line of the differential pair
defined by USB standards.
Rev.2 | Page 2 of 9 | www.onsemi.com
PACUSB-U1/U2/U3
Ordering Information
PART NUMBERING INFORMATION
Standard FInish
Lead-free Finish
Ordering Part
Number1
Ordering Part
Number1
R1 Value (Ω)
Pins
Package
SC70-6
Part Marking
Part Marking
15
15
33
33
22
22
6
6
6
6
6
6
PACUSB-U1
PACUSB-U1Y6
PACUSB-U2
UU1
PACUSB-U1R
PACUSB-U1Y6R
PACUSB-U2R
U1R
SOT23-6
SC70-6
UU1Y
UU2
U1YR
U2R
SOT23-6
SC70-6
PACUSB-U2Y6
PACUSB-U3
UU2Y
UU3
PACUSB-U2Y6R
PACUSB-U3R
U2YR
U3R
SOT23-6
PACUSB-U3Y6
UU3Y
PACUSB-U3Y6R
U3YR
Note 1: Parts are shipped in Tape & Reel form unless otherwise specified.
Specifications
ABSOLUTE MAXIMUM RATINGS
PARAMETER
RATING
UNITS
V3.3 (Supply Voltage)
5.5
V
Operating Temperature Range
Storage Temperature Range
DC Power to Resistor
-40 to +85
-65 to +150
100
°C
°C
mW
mW
Package Power
200
STANDARD OPERATING CONDITIONS
PARAMETER
RATING
UNITS
V3.3 (Supply Voltage)
3.3
V
Ambient Operating Temperature
-40 to +85
°C
Rev. 2 | Page 3 of 9 | www.onsemi.com
PACUSB-U1/U2/U3
ELECTRICAL OPERATING CHARACTERISTICS
SYMBOL PARAMETER
CONDITIONS
MIN
TYP
MAX UNITS
R1
R1
R1
R2
C1
Resistance R1 (PACUSB-U1 only)
Measured at TA = 25°C
12
15
18
40
26
1.8
56
Ω
Ω
Resistance R1 (PACUSB-U2 only)
Resistance R1 (PACUSB-U3 only)
Resistance R2
Measured at TA = 25°C
Measured at TA = 25°C
Measured at TA = 25°C
26
18
1.2
38
33
22
1.5
47
Ω
kΩ
pF
Capacitance C1
Measured at 1 MHz, 2.5VDC,
TA =25°C
ILEAK
VD1
Diode Leakage Current to GND
At 3.3VDC and TA = 25°C
1
100
nA
V
Diode Reverse-biased Stand-off
Voltage
I = 10μA,TA = 25°C
5.5
VD2
Signal Clamp Voltage
Positive Clamp
@ 10mA, TA = 25°C
@ 10mA, TA = 25°C
5.6
-1.2
6.8
-0.8
8.0
-0.4
V
V
Negative Clamp
VESD
In-system ESD Withstand Voltage
Human Body Model, MIL-STD-
Note 1
Note 1
Note 1
kV
kV
kV
30
15
25
883,
Method 3015
IEC 61000-4-2, contact discharge
method (I/O pins)
IEC 61000-4-2, contact discharge
method (V3.3 pin)
VCLAMP
Clamping Voltage during ESD
Discharge
MIL-STD-883, Method 3015, 8kV;
Note 1
Positive
Negative
10
-5
V
V
Note 1: ESD applied to input/output/V3.3 pins with respect to GND, one at a time. Clamping voltage is measured at the opposite
side of the EMI filter to the ESD pin (i.e., if ESD is applied to pin 1, then clamping voltage is measured at pin 6). Unused
pins are open.
Rev.2 | Page 4 of 9 | www.onsemi.com
PACUSB-U1/U2/U3
Application Information
The PACUSB-U1/U2/U3 is targeted for upstream USB ports (peripherals). It provides series termination, EMI
filtering, and ESD protection for the two USB data lines D+ and D-.
The USB Specification revision 1.1 provides for two data rates:
•
•
The Full Speed signaling bit rate at 12 Mbits per second, and
The Low Speed signaling bit rate at 1.5 Mbits per second.
The speed is selected by connecting one of the data lines (D+ or D-) to a 3.3V supply voltage via a 1.5kΩ pull-
up resistor (R2).
Connections for Full Speed Operation
Full Speed devices have the pull-up resistor (R2) connected to the D+ data line, as shown in Full Speed
Connection. Pin1 is tied to the D+ line of the USB controller. Pin 6 is connected to the D+ line on the USB
connector.
Connections for Low Speed Operation
Low Speed devices have the pull-up resistor (R2) connected to the D- data line, as shown in Low Speed
Connection. Pin 1 is tied to the D- line of the USB controller; pin 6 is connected to the D- line on the USB
connector.
Figure 1. Full Speed Connection
Rev. 2 | Page 5 of 9 | www.onsemi.com
PACUSB-U1/U2/U3
Figure 2. Low Speed Connection
Rev.2 | Page 6 of 9 | www.onsemi.com
PACUSB-U1/U2/U3
Mechanical Details
PACUSB-U1/U2/U3 devices are available in 6-pin SC70 and 6-pin SOT23 packages.
SC70 Mechanical Specifications
Dimensions for the PACUSB-U1/U2/U3 supplied in a SC70-6 package are presented below.
For complete information on the SC70, see the California Micro Devices SC70 Package Information document.
PACKAGE DIMENSIONS
TOP VIEW
e
e
MO-203 Issue A
6
Package
Pins
6
5
4
3
HE
E
Millimeters
Dimensions
Min
Max
1
2
0.80
0.00
0.70
0.15
0.08
1.85
1.15
1.10
A
A1
A2
B
B
0.10
1.00
0.30
0.25
2.25
1.35
SIDE VIEW
D
c
A2 A
A1
D
E
0.65 BSC
3000 pcs
e
END VIEW
2.00
0.26
2.40
0.46
HE
L
c
# per
tape and reel
L
Package Dimensions for SC70-6.
Rev. 2 | Page 7 of 9 | www.onsemi.com
PACUSB-U1/U2/U3
Mechanical Details (continued)
SOT23 Mechanical Specifications
Dimensions for the PACUSB-U1/U2/U3 supplied in a SOT23-6 package are presented below.
For complete information on the SOT23 , see the California Micro Devices SOT23 Package Information
document.
PACKAGE DIMENSIONS
TOP VIEW
MO-178
6
Package
Pins
e1
e
6
1
5
4
3
Millimeters
Min Max
Inches
Max
Dimensions
E1
E
Min
--
1.45
0.15
0.50
0.22
3.05
3.00
1.75
--
0.057
0.006
0.020
0.009
0.120
0.118
0.069
A
A1
b
2
0.00
0.30
0.08
2.75
2.60
1.45
0.000
0.012
0.003
0.108
0.102
0.057
b
SIDE VIEW
D
c
D
E
A
E1
e
A1
0.95 BSC
0.0374 BSC
1.90 BSC
0.60 REF
0.0748 BSC
0.0236 REF
e1
L
END VIEW
3000 pcs
# per tape
and reel
c
L1
L
Controlling dimension: inches
Package Dimensions for SOT23-6.
Rev.2 | Page 8 of 9 | www.onsemi.com
PACUSB-U1/U2/U3
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any
products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising
out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical”
parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating
parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the
rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to
support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or
use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors
harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such
unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action
Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
N. American Technical Support: 800-282-9855
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada
Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
Toll Free USA/Canada
Europe, Middle East and Africa Technical
Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81-3-5773-3850
For additional information, please contact your local
Sales Representative
Rev. 2 | Page 9 of 9 | www.onsemi.com
相关型号:
©2020 ICPDF网 联系我们和版权申明