S1A [ONSEMI]
1.0A通用整流器;型号: | S1A |
厂家: | ONSEMI |
描述: | 1.0A通用整流器 IOT 光电二极管 |
文件: | 总5页 (文件大小:151K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DATA SHEET
www.onsemi.com
General-Purpose Rectifiers
S1A - S1M
2
1
Anode
Cathode
Description
In the world of commodity rectifiers, onsemi S1 family of 1 A,
P−I−N, SMA rectifiers stand out for their optimized low leakage, low
capacitance, and fast response time. This was achieved while
1
maintaining the industry standard V max of 1.1 V at 1 A and a 30 A
F
surge rating. In today’s world, where system power efficiency is a
critical differentiating feature, these advantages can be leveraged to
support those higher efficiency goals.
2
SMA
CASE 403AE
Features
• 1 AI
Current Rating
• Glass Passivated
F(AV)
MARKING DIAGRAM
• Low Leakage:
♦ 1 mA Maximum at 25°C
♦ 50 mA Maximum at 125°C
• Fast Response: 1.8 ms (Typical)
ON
ZXYY
DDDD
• 30 A Surge Rating
• 50 V to 1000 V Reverse Voltage Ratings
• 6.6 pF Typical Capacitance
• UL Certified, UL #E258596
Z
X
= Assembly Plant Code
= Last Digit of Year of Manufacture
= Weekly Code of Manufacture
= Specific Device Code
YY
DDDD
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
ORDERING INFORMATION
†
Part Number
S1A
Device Code Marking
Package
Shipping
S1A
S1B
S1D
S1G
S1J
DO−214AC (SMA)
(Pb−Free)
7500 / Tape & Reel
7500 / Tape & Reel
7500 / Tape & Reel
7500 / Tape & Reel
7500 / Tape & Reel
7500 / Tape & Reel
7500 / Tape & Reel
S1B
S1D
S1G
S1J
S1K
S1K
S1M
S1M
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2001
1
Publication Order Number:
August, 2021 − Rev. 3
S1M/D
S1A − S1M
ABSOLUTE MAXIMUM RATINGS (T = 25°C unless otherwise noted) (Note 1)
A
Value
S1G
400
S1A
S1B
S1D
S1J
S1K
S1M
Symbol
Parameter
Unit
V
V
RRM
Maximum Repetitive Reverse Voltage
50
100
200
600
800
1000
I
Average Rectified Forward Current at
A
1.0
A
F(AV)
T = 100°C
I
Non−Repetitive Peak Forward Surge
Current 8.3 ms Single Half−Sine−Wave
30
A
FSM
T
Storage Temperature Range
−55 to +150
−55 to +150
°C
°C
STG
T
J
Operating Junction Temperature
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. These ratings are limiting values above which the serviceability of any semiconductor device maybe impaired.
THERMAL CHARACTERISTICS (T = 25°C unless otherwise noted) (Note 1)
A
Symbol
Characteristic
Value
1.4
Unit
W
P
D
Power Dissipation
R
Thermal Resistance, Junction to Ambient (Note 2)
Thermal Resistance, Junction to Ambient (Note 3)
85
°C/W
°C/W
°C/W
q
q
JA
JA
R
170
25
Ψ
Junction−Lead Thermal Characteristics (Note 3)
JL
2
2. Device mounted on FR−4 PCB, land pattern size: 25 mm (5 x 5 mm).
2
3. Device mounted on FR−4 PCB, land pattern size: 4.6375 mm (2.65 x 1.75 mm).
ELECTRICAL CHARACTERISTICS (T = 25°C unless otherwise noted)
A
Symbol
Parameter
Forward Voltage
Conditions
I = 1.0 A
Min
−
Typ
−
Max
1.1
−
Unit
V
F
V
F
t
rr
Reverse Recovery Time
I = 0.5 A, I = 1.0 A
−
1.8
ms
F
rr
R
I
= 0.25 A
I
Reverse Current at Rated V
T = 25°C
−
−
−
−
−
1.0
50
−
mA
R
R
A
TA = 125°C
= 4.0 V, f = 1.0 MHz
C
Junction Capacitance
V
R
6.6
pF
J
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
www.onsemi.com
2
S1A − S1M
TYPICAL PERFORMANCE CHARACTERISTICS
2
1
0
100
10
1
0.1
0.01
0.6
0.8
1
1.4
1.6
1.8
1.2
0
25
50
75
100 125
150
175
V , Forward Voltage (°C)
F
Lead Temperature (°C)
Figure 1. Forward Current Derating Curve
Figure 2. Forward Voltage Characteristics
100
10
1
30
25
20
15
10
5
8.3 ms Single Half Sine−Wave
JEDEC Method
T = 125°C
J
T = 75°C
J
0.1
0.01
T = 25°C
J
0.001
0
1
2
5
10
20
50
100
0
20
40
60
80
100
120
140
Percent of Rated Peak Reverse Voltage (%)
Number of Cycles at 60 Hz
Figure 4. Reverse Current vs. Reverse Voltage
Figure 3. Non−Repetitive Surge Current
100
50
100
50
T = 25°C
J
f = 1.0 MHz
Vsig = 50 mV p−p
10
5
10
5
Units Mounted On
20” x 20” (5.4 mm2) + 0.5 mil
inches (0.013 mm)
Thick Copper Land Areas
1
0.01
1
0.01
0.1
1
10
100
0.1
1
10
100
Pulse Duration (s)
V , Reverse Voltage (V)
R
Figure 5. Total Capacitance
Figure 6. Thermal Impedance Characteristics
www.onsemi.com
3
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
SMA
CASE 403AE
ISSUE O
DATE 31 AUG 2016
5.60
4.80
M
B
B
0.13
B
C
B
A
2.65
2.95
2.50
1.65
1.20
1.75
4.30
4.75
4.00
B
A
LAND PATTERN RECOMMENDATION
TOP VIEW
2.50 MAX
A
2.20
1.90
NOTES:
A. EXCEPT WHERE NOTED, CONFORMS
TO JEDEC DO214 VARIATION AC.
0.30
0.05
B
DOES NOT COMPLY JEDEC STANDARD
VALUE.
0.203
0.050
B
C
C. ALL DIMENSIONS ARE IN MILLIMETERS.
D. DIMENSIONS ARE EXCLUSIVE OF
BURRS, MOLD FLASH AND TIE BAR
PROTRUSIONS.
E. DIMENSIONS AND TOLERANCE AS
PER ASME Y14.5−2009.
E. LAND PATTERN STD. DIOM5025X231M
2.05
1.95
M
0.13
C
B
A
SIDE VIEW
8 °
0 °
R0.15 4X
GAGE PLANE
0.45
0.41
0.15
1.52
0.75
8 °
0 °
DETAIL A
SCALE 20 : 1
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
DOCUMENT NUMBER:
DESCRIPTION:
98AON13440G
SMA
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
ADDITIONAL INFORMATION
TECHNICAL PUBLICATIONS:
Technical Library: www.onsemi.com/design/resources/technical−documentation
onsemi Website: www.onsemi.com
ONLINE SUPPORT: www.onsemi.com/support
For additional information, please contact your local Sales Representative at
www.onsemi.com/support/sales
相关型号:
S1A-GT3
Rectifier Diode, 1 Element, 1A, 50V V(RRM), Silicon, DO-214AC, PLASTIC, SMA, 2 PIN
SENSITRON
S1A-HE3/5AT
Rectifier Diode, 1 Element, 1A, 50V V(RRM), Silicon, DO-214AC, ROHS COMPLIANT, PLASTIC, SMA, 2 PIN
VISHAY
S1A-HE3/61T
Rectifier Diode, 1 Element, 1A, 50V V(RRM), Silicon, DO-214AC, ROHS COMPLIANT, PLASTIC, SMA, 2 PIN
VISHAY
S1A-L-TP
Rectifier Diode, 1 Element, 1A, 50V V(RRM), Silicon, DO-214AA, ROHS COMPLIANT, PLASTIC, SMB, 2 PIN
MCC
©2020 ICPDF网 联系我们和版权申明